aboutsummaryrefslogtreecommitdiff
path: root/drivers/acpi
AgeCommit message (Collapse)Author
2013-03-12Merge tag 'stable/for-linus-3.9-rc2-tag' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen Pull Xen fixes from Konrad Rzeszutek Wilk: - Compile warnings and errors (one on x86, two on ARM) - WARNING in xen-pciback - Use the acpi_processor_get_performance_info instead of the 'register' version * tag 'stable/for-linus-3.9-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen: xen/acpi: remove redundant acpi/acpi_drivers.h include xen: arm: mandate EABI and use generic atomic operations. acpi: Export the acpi_processor_get_performance_info xen/pciback: Don't disable a PCI device that is already disabled.
2013-03-06acpi: Export the acpi_processor_get_performance_infoKonrad Rzeszutek Wilk
The git commit d5aaffa9dd531c978c6f3fea06a2972653bd7fc8 (cpufreq: handle cpufreq being disabled for all exported function) tightens the cpufreq API by returning errors when disable_cpufreq() had been called. The problem we are hitting is that the module xen-acpi-processor which uses the ACPI's functions: acpi_processor_register_performance, acpi_processor_preregister_performance, and acpi_processor_notify_smm fails at acpi_processor_register_performance with -22. Note that earlier during bootup in arch/x86/xen/setup.c there is also an call to cpufreq's API: disable_cpufreq(). This is b/c we want the Linux kernel to parse the ACPI data, but leave the cpufreq decisions to the hypervisor. In v3.9 all the checks that d5aaffa9dd531c978c6f3fea06a2972653bd7fc8 added are now hit and the calls to cpufreq_register_notifier will now fail. This means that acpi_processor_ppc_init ends up printing: "Warning: Processor Platform Limit not supported" and the acpi_processor_ppc_status is not set. The repercussions of that is that the call to acpi_processor_register_performance fails right away at: if (!(acpi_processor_ppc_status & PPC_REGISTERED)) and we don't progress any further on parsing and extracting the _P* objects. The only reason the Xen code called that function was b/c it was exported and the only way to gather the P-states. But we can also just make acpi_processor_get_performance_info be exported and not use acpi_processor_register_performance. This patch does so. Acked-by: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2013-03-04ACPI / glue: Drop .find_bridge() callback from struct acpi_bus_typeRafael J. Wysocki
After PCI and USB have stopped using the .find_bridge() callback in struct acpi_bus_type, the only remaining user of it is SATA, but SATA only pretends to be a user, because it points that callback to a stub always returning -ENODEV. For this reason, drop the SATA's dummy .find_bridge() callback and remove .find_bridge(), which is not used any more, from struct acpi_bus_type entirely. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Yinghai Lu <yinghai@kernel.org> Acked-by: Jeff Garzik <jgarzik@pobox.com>
2013-03-04ACPI / glue: Add .match() callback to struct acpi_bus_typeRafael J. Wysocki
USB uses the .find_bridge() callback from struct acpi_bus_type incorrectly, because as a result of the way it is used by USB every device in the system that doesn't have a bus type or parent is passed to usb_acpi_find_device() for inspection. What USB actually needs, though, is to call usb_acpi_find_device() for USB ports that don't have a bus type defined, but have usb_port_device_type as their device type, as well as for USB devices. To fix that replace the struct bus_type pointer in struct acpi_bus_type used for matching devices to specific subsystems with a .match() callback to be used for this purpose and update the users of struct acpi_bus_type, including USB, accordingly. Define the .match() callback routine for USB, usb_acpi_bus_match(), in such a way that it will cover both USB devices and USB ports and remove the now redundant .find_bridge() callback pointer from usb_acpi_bus. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Yinghai Lu <yinghai@kernel.org> Acked-by: Jeff Garzik <jgarzik@pobox.com>
2013-03-04ACPI / porocessor: Beautify code, pr->id is u32 which is never < 0Chen Gang
pr->id is u32 which never < 0, so remove the redundant pr->id < 0 check from acpi_processor_add(). [rjw: Changelog] Signed-off-by: Chen Gang <gang.chen@asianux.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-03-04ACPI / processor: Remove redundant NULL check before kfreeSyam Sidhardhan
kfree() on a NULL pointer is a no-op, so remove a redundant NULL pointer check in map_mat_entry(). [rjw: Changelog] Signed-off-by: Syam Sidhardhan <s.syam@samsung.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-03-04ACPI / Sleep: Avoid interleaved message on errorsJoe Perches
Got this dmesg log on an Acer Aspire 725. [ 0.256351] ACPI: (supports S0ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20130117/hwxface-568) [ 0.256373] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20130117/hwxface-568) [ 0.256391] S3 S4 S5) Avoid this interleaving error messages. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-03-02x86, ACPI, mm: Revert movablemem_map supportYinghai Lu
Tim found: WARNING: at arch/x86/kernel/smpboot.c:324 topology_sane.isra.2+0x6f/0x80() Hardware name: S2600CP sched: CPU #1's llc-sibling CPU #0 is not on the same node! [node: 1 != 0]. Ignoring dependency. smpboot: Booting Node 1, Processors #1 Modules linked in: Pid: 0, comm: swapper/1 Not tainted 3.9.0-0-generic #1 Call Trace: set_cpu_sibling_map+0x279/0x449 start_secondary+0x11d/0x1e5 Don Morris reproduced on a HP z620 workstation, and bisected it to commit e8d195525809 ("acpi, memory-hotplug: parse SRAT before memblock is ready") It turns out movable_map has some problems, and it breaks several things 1. numa_init is called several times, NOT just for srat. so those nodes_clear(numa_nodes_parsed) memset(&numa_meminfo, 0, sizeof(numa_meminfo)) can not be just removed. Need to consider sequence is: numaq, srat, amd, dummy. and make fall back path working. 2. simply split acpi_numa_init to early_parse_srat. a. that early_parse_srat is NOT called for ia64, so you break ia64. b. for (i = 0; i < MAX_LOCAL_APIC; i++) set_apicid_to_node(i, NUMA_NO_NODE) still left in numa_init. So it will just clear result from early_parse_srat. it should be moved before that.... c. it breaks ACPI_TABLE_OVERIDE...as the acpi table scan is moved early before override from INITRD is settled. 3. that patch TITLE is total misleading, there is NO x86 in the title, but it changes critical x86 code. It caused x86 guys did not pay attention to find the problem early. Those patches really should be routed via tip/x86/mm. 4. after that commit, following range can not use movable ram: a. real_mode code.... well..funny, legacy Node0 [0,1M) could be hot-removed? b. initrd... it will be freed after booting, so it could be on movable... c. crashkernel for kdump...: looks like we can not put kdump kernel above 4G anymore. d. init_mem_mapping: can not put page table high anymore. e. initmem_init: vmemmap can not be high local node anymore. That is not good. If node is hotplugable, the mem related range like page table and vmemmap could be on the that node without problem and should be on that node. We have workaround patch that could fix some problems, but some can not be fixed. So just remove that offending commit and related ones including: f7210e6c4ac7 ("mm/memblock.c: use CONFIG_HAVE_MEMBLOCK_NODE_MAP to protect movablecore_map in memblock_overlaps_region().") 01a178a94e8e ("acpi, memory-hotplug: support getting hotplug info from SRAT") 27168d38fa20 ("acpi, memory-hotplug: extend movablemem_map ranges to the end of node") e8d195525809 ("acpi, memory-hotplug: parse SRAT before memblock is ready") fb06bc8e5f42 ("page_alloc: bootmem limit with movablecore_map") 42f47e27e761 ("page_alloc: make movablemem_map have higher priority") 6981ec31146c ("page_alloc: introduce zone_movable_limit[] to keep movable limit for nodes") 34b71f1e04fc ("page_alloc: add movable_memmap kernel parameter") 4d59a75125d5 ("x86: get pg_data_t's memory from other node") Later we should have patches that will make sure kernel put page table and vmemmap on local node ram instead of push them down to node0. Also need to find way to put other kernel used ram to local node ram. Reported-by: Tim Gardner <tim.gardner@canonical.com> Reported-by: Don Morris <don.morris@hp.com> Bisected-by: Don Morris <don.morris@hp.com> Tested-by: Don Morris <don.morris@hp.com> Signed-off-by: Yinghai Lu <yinghai@kernel.org> Cc: Tony Luck <tony.luck@intel.com> Cc: Thomas Renninger <trenn@suse.de> Cc: Tejun Heo <tj@kernel.org> Cc: Tang Chen <tangchen@cn.fujitsu.com> Cc: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-28Merge branch 'linux_next' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-edac Pull EDAC fixes and ghes-edac from Mauro Carvalho Chehab: "For: - Some fixes at edac drivers (i7core_edac, sb_edac, i3200_edac); - error injection support for i5100, when EDAC debug is enabled; - fix edac when it is loaded builtin (early init for the subsystem); - a "Firmware First" EDAC driver, allowing ghes to report errors via EDAC (ghes-edac). With regards to ghes-edac, this fixes a longstanding BZ at Red Hat that happens with Nehalem and Sandy Bridge CPUs: when both GHES and i7core_edac or sb_edac are running, the error reports are unpredictable, as both BIOS and OS race to access the registers. With ghes-edac, the EDAC core will refuse to register any other concurrent memory error driver. This patchset moves the ghes struct definitions to a separate header file (include/acpi/ghes.h) and adds 3 hooks at apei/ghes.c to register/unregister and to report errors via ghes-edac. Those changes were acked by ghes driver maintainer (Huang)." * 'linux_next' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-edac: (30 commits) i5100_edac: convert to use simple_open() ghes_edac: fix to use list_for_each_entry_safe() when delete list items ghes_edac: Fix RAS tracing ghes_edac: Make it compliant with UEFI spec 2.3.1 ghes_edac: Improve driver's printk messages ghes_edac: Don't credit the same memory dimm twice ghes_edac: do a better job of filling EDAC DIMM info ghes_edac: add support for reporting errors via EDAC ghes_edac: Register at EDAC core the BIOS report ghes: add the needed hooks for EDAC error report ghes: move structures/enum to a header file edac: add support for error type "Info" edac: add support for raw error reports edac: reduce stack pressure by using a pre-allocated buffer edac: lock module owner to avoid error report conflicts edac: remove proc_name from mci structure edac: add a new memory layer type edac: initialize the core earlier edac: better report error conditions in debug mode i5100_edac: Remove two checkpatch warnings ...
2013-02-27Merge branch 'x86-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull more x86 fixes from Peter Anvin: "Additional x86 fixes. Three of these patches are pure documentation, two are pretty trivial; the remaining one fixes boot problems on some non-BIOS machines." * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86: Make sure we can boot in the case the BDA contains pure garbage x86, efi: Mark disable_runtime as __initdata x86, doc: Fix incorrect comment about 64-bit code segment descriptors doc, kernel-parameters: Document 'console=hvc<n>' doc, xen: Mention 'earlyprintk=xen' in the documentation. ACPI: Overriding ACPI tables via initrd only works with an initrd and on X86
2013-02-25Merge tag 'pm+acpi-fixes-3.9-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull ACPI and power management fixes from Rafael Wysocki: - Fixes for blackfin and microblaze build problems introduced by the removal of global pm_idle. From Lars-Peter Clausen. - OPP core build fix from Shawn Guo. - Error condition check fix for the new imx6q-cpufreq driver from Wei Yongjun. - Fix for an AER driver crash related to the lack of APEI initialization for acpi=off. From Rafael J Wysocki. - Fix for a USB breakage on Thinkpad T430 related to ACPI power resources and PCI wakeup from Rafael J. Wysocki. * tag 'pm+acpi-fixes-3.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: ACPI / PM: Take unusual configurations of power resources into account imx6q-cpufreq: fix return value check in imx6q_cpufreq_probe() PM / OPP: fix condition for empty of_init_opp_table() ACPI / APEI: Fix crash in apei_hest_parse() for acpi=off microblaze idle: Fix compile error blackfin idle: Fix compile error
2013-02-25Merge tag 'pci-v3.9-changes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI changes from Bjorn Helgaas: "Host bridge hotplug - Major overhaul of ACPI host bridge add/start (Rafael Wysocki, Yinghai Lu) - Major overhaul of PCI/ACPI binding (Rafael Wysocki, Yinghai Lu) - Split out ACPI host bridge and ACPI PCI device hotplug (Yinghai Lu) - Stop caching _PRT and make independent of bus numbers (Yinghai Lu) PCI device hotplug - Clean up cpqphp dead code (Sasha Levin) - Disable ARI unless device and upstream bridge support it (Yijing Wang) - Initialize all hot-added devices (not functions 0-7) (Yijing Wang) Power management - Don't touch ASPM if disabled (Joe Lawrence) - Fix ASPM link state management (Myron Stowe) Miscellaneous - Fix PCI_EXP_FLAGS accessor (Alex Williamson) - Disable Bus Master in pci_device_shutdown (Konstantin Khlebnikov) - Document hotplug resource and MPS parameters (Yijing Wang) - Add accessor for PCIe capabilities (Myron Stowe) - Drop pciehp suspend/resume messages (Paul Bolle) - Make pci_slot built-in only (not a module) (Jiang Liu) - Remove unused PCI/ACPI bind ops (Jiang Liu) - Removed used pci_root_bus (Bjorn Helgaas)" * tag 'pci-v3.9-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (51 commits) PCI/ACPI: Don't cache _PRT, and don't associate them with bus numbers PCI: Fix PCI Express Capability accessors for PCI_EXP_FLAGS ACPI / PCI: Make pci_slot built-in only, not a module PCI/PM: Clear state_saved during suspend PCI: Use atomic_inc_return() rather than atomic_add_return() PCI: Catch attempts to disable already-disabled devices PCI: Disable Bus Master unconditionally in pci_device_shutdown() PCI: acpiphp: Remove dead code for PCI host bridge hotplug PCI: acpiphp: Create companion ACPI devices before creating PCI devices PCI: Remove unused "rc" in virtfn_add_bus() PCI: pciehp: Drop suspend/resume ENTRY messages PCI/ASPM: Don't touch ASPM if forcibly disabled PCI/ASPM: Deallocate upstream link state even if device is not PCIe PCI: Document MPS parameters pci=pcie_bus_safe, pci=pcie_bus_perf, etc PCI: Document hpiosize= and hpmemsize= resource reservation parameters PCI: Use PCI Express Capability accessor PCI: Introduce accessor to retrieve PCIe Capabilities Register PCI: Put pci_dev in device tree as early as possible PCI: Skip attaching driver in device_add() PCI: acpiphp: Keep driver loaded even if no slots found ...
2013-02-25Merge tag 'modules-next-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux Pull module update from Rusty Russell: "The sweeping change is to make add_taint() explicitly indicate whether to disable lockdep, but it's a mechanical change." * tag 'modules-next-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux: MODSIGN: Add option to not sign modules during modules_install MODSIGN: Add -s <signature> option to sign-file MODSIGN: Specify the hash algorithm on sign-file command line MODSIGN: Simplify Makefile with a Kconfig helper module: clean up load_module a little more. modpost: Ignore ARC specific non-alloc sections module: constify within_module_* taint: add explicit flag to show whether lock dep is still OK. module: printk message when module signature fail taints kernel.
2013-02-25ghes: add the needed hooks for EDAC error reportMauro Carvalho Chehab
In order to allow reporting errors via EDAC, add hooks for: 1) register an EDAC driver; 2) unregister an EDAC driver; 3) report errors via EDAC. As the EDAC driver will need to access the ghes structure, adds it as one of the parameters for ghes_do_proc. Acked-by: Huang Ying <ying.huang@intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-02-25ACPI: Overriding ACPI tables via initrd only works with an initrd and on X86Thomas Renninger
Reflect this dependency in Kconfig, to prevent build failures. Shorten the config description as suggested by Borislav Petkov. Finding a suitable memory area to store the modified table(s) has been taken over from arch/x86/kernel/setup.c and makes use of max_low_pfn_mapped: memblock_find_in_range(0, max_low_pfn_mapped,...) This one is X86 specific. It may not be hard to extend this functionality for other ACPI aware architectures if there is need for. For now make this feature only available for X86 to avoid build failures on IA64, compare with: https://bugzilla.kernel.org/show_bug.cgi?id=54091 Signed-off-by: Thomas Renninger <trenn@suse.de> Link: http://lkml.kernel.org/r/1361538742-67599-3-git-send-email-trenn@suse.de Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2013-02-23acpi, memory-hotplug: parse SRAT before memblock is readyTang Chen
On linux, the pages used by kernel could not be migrated. As a result, if a memory range is used by kernel, it cannot be hot-removed. So if we want to hot-remove memory, we should prevent kernel from using it. The way now used to prevent this is specify a memory range by movablemem_map boot option and set it as ZONE_MOVABLE. But when the system is booting, memblock will allocate memory, and reserve the memory for kernel. And before we parse SRAT, and know the node memory ranges, memblock is working. And it may allocate memory in ranges to be set as ZONE_MOVABLE. This memory can be used by kernel, and never be freed. So, let's parse SRAT before memblock is called first. And it is early enough. The first call of memblock_find_in_range_node() is in: setup_arch() |-->setup_real_mode() so, this patch add a function early_parse_srat() to parse SRAT, and call it before setup_real_mode() is called. NOTE: 1) early_parse_srat() is called before numa_init(), and has initialized numa_meminfo. So DO NOT clear numa_nodes_parsed in numa_init() and DO NOT zero numa_meminfo in numa_init(), otherwise we will lose memory numa info. 2) I don't know why using count of memory affinities parsed from SRAT as a return value in original acpi_numa_init(). So I add a static variable srat_mem_cnt to remember this count and use it as the return value of the new acpi_numa_init() [mhocko@suse.cz: parse SRAT before memblock is ready fix] Signed-off-by: Tang Chen <tangchen@cn.fujitsu.com> Reviewed-by: Wen Congyang <wency@cn.fujitsu.com> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Jiang Liu <jiang.liu@huawei.com> Cc: Jianguo Wu <wujianguo@huawei.com> Cc: Kamezawa Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Lai Jiangshan <laijs@cn.fujitsu.com> Cc: Wu Jianguo <wujianguo@huawei.com> Cc: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Len Brown <lenb@kernel.org> Cc: "Brown, Len" <len.brown@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-23cpu-hotplug, memory-hotplug: try offlining the node when hotremoving a cpuWen Congyang
The node will be offlined when all memory/cpu on the node is hotremoved. So we should try offline the node when hotremoving a cpu on the node. Signed-off-by: Wen Congyang <wency@cn.fujitsu.com> Signed-off-by: Tang Chen <tangchen@cn.fujitsu.com> Cc: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com> Cc: David Rientjes <rientjes@google.com> Cc: Jiang Liu <liuj97@gmail.com> Cc: Minchan Kim <minchan.kim@gmail.com> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Mel Gorman <mel@csn.ul.ie> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Len Brown <lenb@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-23memory-hotplug: remove sysfs file of nodeTang Chen
Introduce a new function try_offline_node() to remove sysfs file of node when all memory sections of this node are removed. If some memory sections of this node are not removed, this function does nothing. Signed-off-by: Wen Congyang <wency@cn.fujitsu.com> Signed-off-by: Tang Chen <tangchen@cn.fujitsu.com> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Jiang Liu <jiang.liu@huawei.com> Cc: Jianguo Wu <wujianguo@huawei.com> Cc: Kamezawa Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Lai Jiangshan <laijs@cn.fujitsu.com> Cc: Wu Jianguo <wujianguo@huawei.com> Cc: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-23Merge branch 'acpi-pm' into fixesRafael J. Wysocki
* acpi-pm: ACPI / PM: Take unusual configurations of power resources into account
2013-02-23ACPI / PM: Take unusual configurations of power resources into accountRafael J. Wysocki
Commit d2e5f0c (ACPI / PCI: Rework the setup and cleanup of device wakeup) moved the initial disabling of system wakeup for PCI devices into a place where it can actually work and that exposed a hidden old issue with crap^Wunusual system designs where the same power resources are used for both wakeup power and device power control at run time. Namely, say there is one power resource such that the ACPI power state D0 of a PCI device depends on that power resource (i.e. the device is in D0 when that power resource is "on") and it is used as a wakeup power resource for the same device. Then, calling acpi_pci_sleep_wake(pci_dev, false) for the device in question will cause the reference counter of that power resource to drop to 0, which in turn will cause it to be turned off. As a result, the device will go into D3cold at that point, although it should have stayed in D0. As it turns out, that happens to USB controllers on some laptops and USB becomes unusable on those machines as a result, which is a major regression from v3.8. To fix this problem, (1) increment the reference counters of wakup power resources during their initialization if they are "on" initially, (2) prevent acpi_disable_wakeup_device_power() from decrementing the reference counters of wakeup power resources that were not enabled for wakeup power previously, and (3) prevent acpi_enable_wakeup_device_power() from incrementing the reference counters of wakeup power resources that already are enabled for wakeup power. In addition to that, if it is impossible to determine the initial states of wakeup power resources, avoid enabling wakeup for devices whose wakeup power depends on those power resources. Reported-by: Dave Jones <davej@redhat.com> Reported-by: Fabio Baltieri <fabio.baltieri@linaro.org> Tested-by: Fabio Baltieri <fabio.baltieri@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-02-23Merge branch 'acpi-cleanup' into fixesRafael J. Wysocki
* acpi-cleanup: ACPI / APEI: Fix crash in apei_hest_parse() for acpi=off
2013-02-23ACPI / APEI: Fix crash in apei_hest_parse() for acpi=offRafael J. Wysocki
After commit 92ef2a2 (ACPI: Change the ordering of PCI root bridge driver registrarion), acpi_hest_init() is never called for acpi=off (acpi_disabled), so hest_disable is not set, but hest_tab is NULL, which causes apei_hest_parse() to crash when it is called from aer_acpi_firmware_first(). Fix that by making apei_hest_parse() check if hest_tab is not NULL in addition to checking hest_disable. Also remove the now useless acpi_disabled check from apei_hest_parse(). Reported-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-02-21Merge tag 'driver-core-3.9-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core patches from Greg Kroah-Hartman: "Here is the big driver core merge for 3.9-rc1 There are two major series here, both of which touch lots of drivers all over the kernel, and will cause you some merge conflicts: - add a new function called devm_ioremap_resource() to properly be able to check return values. - remove CONFIG_EXPERIMENTAL Other than those patches, there's not much here, some minor fixes and updates" Fix up trivial conflicts * tag 'driver-core-3.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (221 commits) base: memory: fix soft/hard_offline_page permissions drivercore: Fix ordering between deferred_probe and exiting initcalls backlight: fix class_find_device() arguments TTY: mark tty_get_device call with the proper const values driver-core: constify data for class_find_device() firmware: Ignore abort check when no user-helper is used firmware: Reduce ifdef CONFIG_FW_LOADER_USER_HELPER firmware: Make user-mode helper optional firmware: Refactoring for splitting user-mode helper code Driver core: treat unregistered bus_types as having no devices watchdog: Convert to devm_ioremap_resource() thermal: Convert to devm_ioremap_resource() spi: Convert to devm_ioremap_resource() power: Convert to devm_ioremap_resource() mtd: Convert to devm_ioremap_resource() mmc: Convert to devm_ioremap_resource() mfd: Convert to devm_ioremap_resource() media: Convert to devm_ioremap_resource() iommu: Convert to devm_ioremap_resource() drm: Convert to devm_ioremap_resource() ...
2013-02-21ghes: move structures/enum to a header fileMauro Carvalho Chehab
As a ghes_edac driver will need to access ghes structures, in order to properly handle the errors, move those structures to a separate header file. No functional changes. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-02-20Merge tag 'pm+acpi-3.9-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull ACPI and power management updates from Rafael Wysocki: - Rework of the ACPI namespace scanning code from Rafael J. Wysocki with contributions from Bjorn Helgaas, Jiang Liu, Mika Westerberg, Toshi Kani, and Yinghai Lu. - ACPI power resources handling and ACPI device PM update from Rafael J Wysocki. - ACPICA update to version 20130117 from Bob Moore and Lv Zheng with contributions from Aaron Lu, Chao Guan, Jesper Juhl, and Tim Gardner. - Support for Intel Lynxpoint LPSS from Mika Westerberg. - cpuidle update from Len Brown including Intel Haswell support, C1 state for intel_idle, removal of global pm_idle. - cpuidle fixes and cleanups from Daniel Lezcano. - cpufreq fixes and cleanups from Viresh Kumar and Fabio Baltieri with contributions from Stratos Karafotis and Rickard Andersson. - Intel P-states driver for Sandy Bridge processors from Dirk Brandewie. - cpufreq driver for Marvell Kirkwood SoCs from Andrew Lunn. - cpufreq fixes related to ordering issues between acpi-cpufreq and powernow-k8 from Borislav Petkov and Matthew Garrett. - cpufreq support for Calxeda Highbank processors from Mark Langsdorf and Rob Herring. - cpufreq driver for the Freescale i.MX6Q SoC and cpufreq-cpu0 update from Shawn Guo. - cpufreq Exynos fixes and cleanups from Jonghwan Choi, Sachin Kamat, and Inderpal Singh. - Support for "lightweight suspend" from Zhang Rui. - Removal of the deprecated power trace API from Paul Gortmaker. - Assorted updates from Andreas Fleig, Colin Ian King, Davidlohr Bueso, Joseph Salisbury, Kees Cook, Li Fei, Nishanth Menon, ShuoX Liu, Srinivas Pandruvada, Tejun Heo, Thomas Renninger, and Yasuaki Ishimatsu. * tag 'pm+acpi-3.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (267 commits) PM idle: remove global declaration of pm_idle unicore32 idle: delete stray pm_idle comment openrisc idle: delete pm_idle mn10300 idle: delete pm_idle microblaze idle: delete pm_idle m32r idle: delete pm_idle, and other dead idle code ia64 idle: delete pm_idle cris idle: delete idle and pm_idle ARM64 idle: delete pm_idle ARM idle: delete pm_idle blackfin idle: delete pm_idle sparc idle: rename pm_idle to sparc_idle sh idle: rename global pm_idle to static sh_idle x86 idle: rename global pm_idle to static x86_idle APM idle: register apm_cpu_idle via cpuidle cpufreq / intel_pstate: Add kernel command line option disable intel_pstate. cpufreq / intel_pstate: Change to disallow module build tools/power turbostat: display SMI count by default intel_idle: export both C1 and C1E ACPI / hotplug: Fix concurrency issues and memory leaks ...
2013-02-19Merge branch 'perf-core-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull perf changes from Ingo Molnar: "There are lots of improvements, the biggest changes are: Main kernel side changes: - Improve uprobes performance by adding 'pre-filtering' support, by Oleg Nesterov. - Make some POWER7 events available in sysfs, equivalent to what was done on x86, from Sukadev Bhattiprolu. - tracing updates by Steve Rostedt - mostly misc fixes and smaller improvements. - Use perf/event tracing to report PCI Express advanced errors, by Tony Luck. - Enable northbridge performance counters on AMD family 15h, by Jacob Shin. - This tracing commit: tracing: Remove the extra 4 bytes of padding in events changes the ABI. All involved parties (PowerTop in particular) seem to agree that it's safe to do now with the introduction of libtraceevent, but the devil is in the details ... Main tooling side changes: - Add 'event group view', from Namyung Kim: To use it, 'perf record' should group events when recording. And then perf report parses the saved group relation from file header and prints them together if --group option is provided. You can use the 'perf evlist' command to see event group information: $ perf record -e '{ref-cycles,cycles}' noploop 1 [ perf record: Woken up 2 times to write data ] [ perf record: Captured and wrote 0.385 MB perf.data (~16807 samples) ] $ perf evlist --group {ref-cycles,cycles} With this example, default perf report will show you each event separately. You can use --group option to enable event group view: $ perf report --group ... # group: {ref-cycles,cycles} # ======== # Samples: 7K of event 'anon group { ref-cycles, cycles }' # Event count (approx.): 6876107743 # # Overhead Command Shared Object Symbol # ................ ....... ................. .......................... 99.84% 99.76% noploop noploop [.] main 0.07% 0.00% noploop ld-2.15.so [.] strcmp 0.03% 0.00% noploop [kernel.kallsyms] [k] timerqueue_del 0.03% 0.03% noploop [kernel.kallsyms] [k] sched_clock_cpu 0.02% 0.00% noploop [kernel.kallsyms] [k] account_user_time 0.01% 0.00% noploop [kernel.kallsyms] [k] __alloc_pages_nodemask 0.00% 0.00% noploop [kernel.kallsyms] [k] native_write_msr_safe 0.00% 0.11% noploop [kernel.kallsyms] [k] _raw_spin_lock 0.00% 0.06% noploop [kernel.kallsyms] [k] find_get_page 0.00% 0.02% noploop [kernel.kallsyms] [k] rcu_check_callbacks 0.00% 0.02% noploop [kernel.kallsyms] [k] __current_kernel_time As you can see the Overhead column now contains both of ref-cycles and cycles and header line shows group information also - 'anon group { ref-cycles, cycles }'. The output is sorted by period of group leader first. - Initial GTK+ annotate browser, from Namhyung Kim. - Add option for runtime switching perf data file in perf report, just press 's' and a menu with the valid files found in the current directory will be presented, from Feng Tang. - Add support to display whole group data for raw columns, from Jiri Olsa. - Add per processor socket count aggregation in perf stat, from Stephane Eranian. - Add interval printing in 'perf stat', from Stephane Eranian. - 'perf test' improvements - Add support for wildcards in tracepoint system name, from Jiri Olsa. - Add anonymous huge page recognition, from Joshua Zhu. - perf build-id cache now can show DSOs present in a perf.data file that are not in the cache, to integrate with build-id servers being put in place by organizations such as Fedora. - perf top now shares more of the evsel config/creation routines with 'record', paving the way for further integration like 'top' snapshots, etc. - perf top now supports DWARF callchains. - Fix mmap limitations on 32-bit, fix from David Miller. - 'perf bench numa mem' NUMA performance measurement suite - ... and lots of fixes, performance improvements, cleanups and other improvements I failed to list - see the shortlog and git log for details." * 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (270 commits) perf/x86/amd: Enable northbridge performance counters on AMD family 15h perf/hwbp: Fix cleanup in case of kzalloc failure perf tools: Fix build with bison 2.3 and older. perf tools: Limit unwind support to x86 archs perf annotate: Make it to be able to skip unannotatable symbols perf gtk/annotate: Fail early if it can't annotate perf gtk/annotate: Show source lines with gray color perf gtk/annotate: Support multiple event annotation perf ui/gtk: Implement basic GTK2 annotation browser perf annotate: Fix warning message on a missing vmlinux perf buildid-cache: Add --update option uprobes/perf: Avoid uprobe_apply() whenever possible uprobes/perf: Teach trace_uprobe/perf code to use UPROBE_HANDLER_REMOVE uprobes/perf: Teach trace_uprobe/perf code to pre-filter uprobes/perf: Teach trace_uprobe/perf code to track the active perf_event's uprobes: Introduce uprobe_apply() perf: Introduce hw_perf_event->tp_target and ->tp_list uprobes/perf: Always increment trace_uprobe->nhit uprobes/tracing: Kill uprobe_trace_consumer, embed uprobe_consumer into trace_uprobe uprobes/tracing: Introduce is_trace_uprobe_enabled() ...
2013-02-19Merge branch 'pci/yinghai-root-bus-hotplug' into nextBjorn Helgaas
* pci/yinghai-root-bus-hotplug: PCI/ACPI: Don't cache _PRT, and don't associate them with bus numbers
2013-02-18Merge branch 'release' of ↵Rafael J. Wysocki
git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux * 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux: (35 commits) PM idle: remove global declaration of pm_idle unicore32 idle: delete stray pm_idle comment openrisc idle: delete pm_idle mn10300 idle: delete pm_idle microblaze idle: delete pm_idle m32r idle: delete pm_idle, and other dead idle code ia64 idle: delete pm_idle cris idle: delete idle and pm_idle ARM64 idle: delete pm_idle ARM idle: delete pm_idle blackfin idle: delete pm_idle sparc idle: rename pm_idle to sparc_idle sh idle: rename global pm_idle to static sh_idle x86 idle: rename global pm_idle to static x86_idle APM idle: register apm_cpu_idle via cpuidle tools/power turbostat: display SMI count by default intel_idle: export both C1 and C1E cpuidle: remove vestage definition of cpuidle_state_usage.driver_data x86 idle: remove 32-bit-only "no-hlt" parameter, hlt_works_ok flag x86 idle: remove mwait_idle() and "idle=mwait" cmdline param ... Conflicts: arch/x86/kernel/process.c (with PM / tracing commit 43720bd) drivers/acpi/processor_idle.c (with ACPICA commit 4f84291)
2013-02-18Merge branch 'misc' into releaseLen Brown
Conflicts: arch/x86/kernel/process.c Signed-off-by: Len Brown <len.brown@intel.com>
2013-02-16PCI/ACPI: Don't cache _PRT, and don't associate them with bus numbersYinghai Lu
Previously, we cached _PRT (PCI routing table, ACPI 5.0 sec 6.2.12) contents and associated each _PRT entry with a PCI bus number. The bus number association means dependencies on PCI device enumeration and bus number assignment, as well as on the PCI/ACPI binding process. After 4f535093cf ("PCI: Put pci_dev in device tree as early as possible"), these dependencies caused the IRQ issues reported by Peter: pci 0000:00:1e.0: PCI bridge to [bus 09] (subtractive decode) pci 0000:00:1e.0: can't derive routing for PCI INT A snd_ctxfi 0000:09:02.0: PCI INT A: no GSI - using ISA IRQ 5 irq 18: nobody cared (try booting with the "irqpoll" option) This patch removes _PRT caching. Instead, we evaluate _PRT as needed in the pci_enable_device() path. This also removes the dependency on PCI bus numbers: we can simply look at the _PRT associated with each bridge as we walk upstream toward the root. [bhelgaas: changelog] Reference: https://bugzilla.kernel.org/show_bug.cgi?id=53561 Reported-and-tested-by: Peter Hurley <peter@hurleysoftware.com> Suggested-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2013-02-15Merge branch 'pci/jiang-pci_slot-kconfig' into nextBjorn Helgaas
* pci/jiang-pci_slot-kconfig: ACPI / PCI: Make pci_slot built-in only, not a module
2013-02-15ACPI / PCI: Make pci_slot built-in only, not a moduleJiang Liu
As discussed in thread at https://patchwork.kernel.org/patch/1946851/, there's no value in supporting CONFIG_ACPI_PCI_SLOT=m any more. So change Kconfig and code to only support building pci_slot as built-in driver. Signed-off-by: Jiang Liu <jiang.liu@huawei.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2013-02-15Merge branch 'pm-assorted'Rafael J. Wysocki
* pm-assorted: suspend: enable freeze timeout configuration through sys ACPI: enable ACPI SCI during suspend PM: Introduce suspend state PM_SUSPEND_FREEZE PM / Runtime: Add new helper function: pm_runtime_active() PM / tracing: remove deprecated power trace API PM: don't use [delayed_]work_pending() PM / Domains: don't use [delayed_]work_pending()
2013-02-15Merge branch 'acpi-assorted'Rafael J. Wysocki
* acpi-assorted: ACPI: Add DMI entry for Sony VGN-FW41E_H ACPI: fix obsolete comment in custom_method.c ACPI / thermal: Use mode to enable/disable kernel thermal processing ACPI thermal: remove unnecessary newline from exception message ACPI sysfs: remove unnecessary newline from exception ACPI video: remove unnecessary newline from error messages ACPI: SRAT: report non-volatile memory in debug ACPI: Rework acpi_get_child() to be more efficient
2013-02-15Merge branch 'acpi-cleanup'Rafael J. Wysocki
* acpi-cleanup: (21 commits) ACPI / hotplug: Fix concurrency issues and memory leaks ACPI: Remove the use of CONFIG_ACPI_CONTAINER_MODULE ACPI / scan: Full transition to D3cold in acpi_device_unregister() ACPI / scan: Make acpi_bus_hot_remove_device() acquire the scan lock ACPI: Drop the container.h header file ACPI / Documentation: refer to correct file for acpi_platform_device_ids[] table ACPI / scan: Make container driver use struct acpi_scan_handler ACPI / scan: Remove useless #ifndef from acpi_eject_store() ACPI: Unbind ACPI drv when probe failed ACPI: sysfs eject support for ACPI scan handlers ACPI / scan: Follow priorities of IDs when matching scan handlers ACPI / PCI: pci_slot: replace printk(KERN_xxx) with pr_xxx() ACPI / dock: Fix acpi_bus_get_device() check in drivers/acpi/dock.c ACPI / scan: Clean up acpi_bus_get_parent() ACPI / platform: Use struct acpi_scan_handler for creating devices ACPI / PCI: Make PCI IRQ link driver use struct acpi_scan_handler ACPI / PCI: Make PCI root driver use struct acpi_scan_handler ACPI / scan: Introduce struct acpi_scan_handler ACPI / scan: Make scanning of fixed devices follow the general scheme ACPI: Drop device start operation that is not used ...
2013-02-13ACPI / hotplug: Fix concurrency issues and memory leaksRafael J. Wysocki
This changeset is aimed at fixing a few different but related problems in the ACPI hotplug infrastructure. First of all, since notify handlers may be run in parallel with acpi_bus_scan(), acpi_bus_trim() and acpi_bus_hot_remove_device() and some of them are installed for ACPI handles that have no struct acpi_device objects attached (i.e. before those objects are created), those notify handlers have to take acpi_scan_lock to prevent races from taking place (e.g. a struct acpi_device is found to be present for the given ACPI handle, but right after that it is removed by acpi_bus_trim() running in parallel to the given notify handler). Moreover, since some of them call acpi_bus_scan() and acpi_bus_trim(), this leads to the conclusion that acpi_scan_lock should be acquired by the callers of these two funtions rather by these functions themselves. For these reasons, make all notify handlers that can handle device addition and eject events take acpi_scan_lock and remove the acpi_scan_lock locking from acpi_bus_scan() and acpi_bus_trim(). Accordingly, update all of their users to make sure that they are always called under acpi_scan_lock. Furthermore, since eject operations are carried out asynchronously with respect to the notify events that trigger them, with the help of acpi_bus_hot_remove_device(), even if notify handlers take the ACPI scan lock, it still is possible that, for example, acpi_bus_trim() will run between acpi_bus_hot_remove_device() and the notify handler that scheduled its execution and that acpi_bus_trim() will remove the device node passed to acpi_bus_hot_remove_device() for ejection. In that case, the struct acpi_device object obtained by acpi_bus_hot_remove_device() will be invalid and not-so-funny things will ensue. To protect agaist that, make the users of acpi_bus_hot_remove_device() run get_device() on ACPI device node objects that are about to be passed to it and make acpi_bus_hot_remove_device() run put_device() on them and check if their ACPI handles are not NULL (make acpi_device_unregister() clear the device nodes' ACPI handles for that check to work). Finally, observe that acpi_os_hotplug_execute() actually can fail, in which case its caller ought to free memory allocated for the context object to prevent leaks from happening. It also needs to run put_device() on the device node that it ran get_device() on previously in that case. Modify the code accordingly. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Yinghai Lu <yinghai@kernel.org>
2013-02-13ACPI / scan: Full transition to D3cold in acpi_device_unregister()Rafael J. Wysocki
In order to drop reference counts of all power resources used by an ACPI device node being removed, acpi_device_unregister() calls acpi_power_transition(device, ACPI_STATE_D3_COLD), which effectively transitions the device node into D3cold if it uses any power resources. However, for some device nodes it may not be appropriate to remove power from them entirely before putting them into D3hot before. On the other hand, executing _PS3 for devices that don't use power resources before removing them shouldn't really hurt. In fact, that is done by acpi_bus_hot_remove_device(), but this is not the right place to do it, because the bus trimming may have caused power to be removed from the device node in question already before. For these reasons, make acpi_device_unregister() carry out full power-off transition for all device nodes supporting that and remove the direct evaluation of _PS3 from acpi_bus_hot_remove_device(). Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-02-13ACPI / scan: Make acpi_bus_hot_remove_device() acquire the scan lockRafael J. Wysocki
The ACPI scan lock has been introduced to prevent acpi_bus_scan() and acpi_bus_trim() from running in parallel with each other for overlapping ACPI namespace scopes. However, it is not sufficient to do that, because if acpi_bus_scan() is run (for an overlapping namespace scope) right after the acpi_bus_trim() in acpi_bus_hot_remove_device(), the subsequent eject will remove devices without removing the corresponding struct acpi_device objects (and possibly companion "physical" device objects). Therefore acpi_bus_hot_remove_device() has to acquire the scan lock before carrying out the bus trimming and hold it through the evaluation of _EJ0, so make that happen. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Toshi Kani <toshi.kani@hp.com>
2013-02-13ACPI: Drop the container.h header fileRafael J. Wysocki
The include/acpi/container.h only contains a definition of a structure that is not used any more, so drop it entirely. Similar change was proposed earlier by Toshi Kani. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Toshi Kani <toshi.kani@hp.com>
2013-02-13ACPI / scan: Make container driver use struct acpi_scan_handlerRafael J. Wysocki
Make the ACPI container driver use struct acpi_scan_handler for representing the object used to initialize ACPI containers and remove the ACPI driver structure used previously and the data structures created by it, since in fact they were not used for any purpose. This simplifies the code and reduces the kernel's memory footprint by avoiding the registration of a struct device_driver object with the driver core and creation of its sysfs directory which is unnecessary. In addition to that, make the namespace walk callback used for installing the notify handlers for ACPI containers more straightforward. This change includes fixes from Toshi Kani. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Yinghai Lu <yinghai@kernel.org> Acked-by: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com> Tested-by: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com> Reviewed-by: Toshi Kani <toshi.kani@hp.com> Tested-by: Toshi Kani <toshi.kani@hp.com>
2013-02-13ACPI / scan: Remove useless #ifndef from acpi_eject_store()Rafael J. Wysocki
Since the FORCE_EJECT symbol is never defined, the #ifndef FORCE_EJECT in acpi_eject_store() is always true, so drop it. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com> Tested-by: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com> Reviewed-by: Toshi Kani <toshi.kani@hp.com> Tested-by: Toshi Kani <toshi.kani@hp.com>
2013-02-13ACPI: Unbind ACPI drv when probe failedToshi Kani
When acpi_device_install_notify_handler() failed in acpi_device_probe(), it calls acpi_drv->ops.remove() and fails the probe. However, the ACPI driver is left bound to the acpi_device. Fix it by clearing the driver and driver_data fields. Signed-off-by: Toshi Kani <toshi.kani@hp.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-02-13ACPI: sysfs eject support for ACPI scan handlersToshi Kani
Changed sysfs eject, acpi_eject_store(), so that it doesn't return error codes for devices nodes with ACPI scan handlers attached and no ACPI drivers. [rjw: Changelog] Signed-off-by: Toshi Kani <toshi.kani@hp.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-02-13ACPI / scan: Follow priorities of IDs when matching scan handlersRafael J. Wysocki
The IDs of ACPI device nodes stored in their pnp.ids member arrays are sorted by decreasing priority (i.e. the highest-priority ID is the first entry). This means that when matching scan handlers to device nodes, the namespace scanning code should walk the list of scan handlers for each device node ID instead of walking the list of device node IDs for each handler (the latter causes the first handler matching any of the device node IDs to be chosen, although there may be another handler matching an ID of a higher priority which should be preferred). Make the code follow this observation. This change has been suggested and justified by Toshi Kani. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Toshi Kani <toshi.kani@hp.com>
2013-02-13ACPI / PCI: pci_slot: replace printk(KERN_xxx) with pr_xxx()Jiang Liu
Trivial changes to replace printk(KERN_xxx) with pr_xxx(). Signed-off-by: Jiang Liu <jiang.liu@huawei.com> Acked-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-02-11Merge branch 'acpi-lpss'Rafael J. Wysocki
* acpi-lpss: ACPI / platform: create LPSS clocks if Lynxpoint devices are found during scan clk: x86: add support for Lynxpoint LPSS clocks x86: add support for Intel Low Power Subsystem ACPI / platform: fix comment about the platform device name ACPI: add support for CSRT table
2013-02-11Merge branch 'acpi-pm'Rafael J. Wysocki
* acpi-pm: (35 commits) ACPI / PM: Handle missing _PSC in acpi_bus_update_power() ACPI / PM: Do not power manage devices in unknown initial states ACPI / PM: Fix acpi_bus_get_device() check in drivers/acpi/device_pm.c ACPI / PM: Fix /proc/acpi/wakeup for devices w/o bus or parent ACPI / PM: Fix consistency check for power resources during resume ACPI / PM: Expose lists of device power resources to user space sysfs: Functions for adding/removing symlinks to/from attribute groups ACPI / PM: Expose current status of ACPI power resources ACPI / PM: Expose power states of ACPI devices to user space ACPI / scan: Prevent device add uevents from racing with user space ACPI / PM: Fix device power state value after transitions to D3cold ACPI / PM: Use string "D3cold" to represent ACPI_STATE_D3_COLD ACPI / PM: Sanitize checks in acpi_power_on_resources() ACPI / PM: Always evaluate _PSn after setting power resources ACPI / PM: Introduce helper for executing _PSn methods ACPI / PM: Make acpi_bus_init_power() more robust ACPI / PM: Fix build for unusual combination of Kconfig options ACPI / PM: remove leading whitespace from #ifdef ACPI / PM: Consolidate suspend-specific and hibernate-specific code ACPI / PM: Move device power management functions to device_pm.c ...
2013-02-11Merge branch 'acpica'Rafael J. Wysocki
* acpica: (56 commits) ACPICA: Update version to 20130117 ACPICA: Update predefined info table for _MLS method ACPICA: Remove some extraneous newlines in ACPI_ERROR type calls ACPICA: iASL/Disassembler: Add option to ignore NOOP opcodes/operators ACPICA: AcpiGetSleepTypeData: Allow \_Sx to return either 1 or 2 integers ACPICA: Update ACPICA copyrights to 2013 ACPICA: Update predefined info table ACPICA: Cleanup table handler naming conflicts. ACPICA: Source restructuring: split large files into 8 new files. ACPICA: Cleanup PM_TIMER_FREQUENCY definition. ACPICA: Cleanup ACPI_DEBUG_PRINT macros to fix potential build breakages. ACPICA: Update version to 20121220. ACPICA: Interpreter: Fix Store() when implicit conversion is not possible. ACPICA: Resources: Split interrupt share/wake bits into two fields. ACPICA: Resources: Support for ACPI 5 wake bit in ExtendedInterrupt descriptor. ACPICA: Interpreter: Add warning if 64-bit constant appears in 32-bit table. ACPICA: Update ACPICA initialization messages. ACPICA: Namespace: Eliminate dot...dot output during initialization. ACPICA: Resource manager: Add support for ACPI 5 wake bit in IRQ descriptor. ACPICA: Fix possible memory leak in dispatcher error path. ...
2013-02-11Merge branch 'acpi-scan'Rafael J. Wysocki
* acpi-scan: (30 commits) ACPI / scan: Fix acpi_bus_get_device() check in acpi_match_device() ACPI / scan: Make namespace scanning and trimming mutually exclusive ACPI / scan: Make it clear that acpi_bus_trim() cannot fail ACPI / scan: Drop acpi_bus_add() and use acpi_bus_scan() instead ACPI: update ej_event interface to take acpi_device ACPI / scan: Add second pass to acpi_bus_trim() ACPI / scan: Change the implementation of acpi_bus_trim() ACPI / scan: Drop the second argument of acpi_bus_trim() ACPI / scan: Drop the second argument of acpi_device_unregister() ACPI: Remove the ops field from struct acpi_device ACPI: remove unused acpi_op_bind and acpi_op_unbind ACPI / scan: Fix check of device_attach() return value. ACPI / scan: Treat power resources in a special way ACPI: Remove unused struct acpi_pci_root.id member ACPI: Drop ACPI device .bind() and .unbind() callbacks ACPI / PCI: Move the _PRT setup and cleanup code to pci-acpi.c ACPI / PCI: Rework the setup and cleanup of device wakeup ACPI: Add .setup() and .cleanup() callbacks to struct acpi_bus_type ACPI: Make acpi_bus_scan() and acpi_bus_add() take only one argument ACPI: Replace ACPI device add_type field with a match_driver flag ...
2013-02-10x86 idle: remove mwait_idle() and "idle=mwait" cmdline paramLen Brown
mwait_idle() is a C1-only idle loop intended to be more efficient than HLT, starting on Pentium-4 HT-enabled processors. But mwait_idle() has been replaced by the more general mwait_idle_with_hints(), which handles both C1 and deeper C-states. ACPI processor_idle and intel_idle use only mwait_idle_with_hints(), and no longer use mwait_idle(). Here we simplify the x86 native idle code by removing mwait_idle(), and the "idle=mwait" bootparam used to invoke it. Since Linux 3.0 there has been a boot-time warning when "idle=mwait" was invoked saying it would be removed in 2012. This removal was also noted in the (now removed:-) feature-removal-schedule.txt. After this change, kernels configured with (CONFIG_ACPI=n && CONFIG_INTEL_IDLE=n) when run on hardware that supports MWAIT will simply use HLT. If MWAIT is desired on those systems, cpuidle and the cpuidle drivers above can be enabled. Signed-off-by: Len Brown <len.brown@intel.com> Cc: x86@kernel.org