aboutsummaryrefslogtreecommitdiff
path: root/drivers/amba
AgeCommit message (Collapse)Author
2013-12-09ARM: 7916/1: amba: Add clk_prepare|unprepare in runtime PM callbacksUlf Hansson
To fully gate the clock and thus potentially also save more power in runtime suspend state, extend clock handling with clk_prepare|unprepare in the runtime PM callbacks. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-12-09ARM: 7915/1: amba: Convert to clk_prepare_enable and clk_disable_unprepareUlf Hansson
To simplify code and error handling let's use clk_prepare_enable and clk_disable_unprepare. No functional change. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-12-09ARM: 7914/1: amba: Drop legacy PM support and use the pm_generic functionsUlf Hansson
All AMBA drivers have converted to use the modern PM ops thus we can safely drop the legacy PM support from the bus. While using the modern PM ops it also makes sense to convert to use the pm_generic callback functions. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-10-31DMA-API: amba: get rid of separate dma_maskRussell King
AMBA Primecell devices always treat streaming and coherent DMA exactly the same, so there's no point in having the masks separated. Acked-by: Grant Likely <grant.likely@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-06-03PM / Runtime: Rework the "runtime idle" helper routineRafael J. Wysocki
The "runtime idle" helper routine, rpm_idle(), currently ignores return values from .runtime_idle() callbacks executed by it. However, it turns out that many subsystems use pm_generic_runtime_idle() which checks the return value of the driver's callback and executes pm_runtime_suspend() for the device unless that value is not 0. If that logic is moved to rpm_idle() instead, pm_generic_runtime_idle() can be dropped and its users will not need any .runtime_idle() callbacks any more. Moreover, the PCI, SCSI, and SATA subsystems' .runtime_idle() routines, pci_pm_runtime_idle(), scsi_runtime_idle(), and ata_port_runtime_idle(), respectively, as well as a few drivers' ones may be simplified if rpm_idle() calls rpm_suspend() after 0 has been returned by the .runtime_idle() callback executed by it. To reduce overall code bloat, make the changes described above. Tested-by: Mika Westerberg <mika.westerberg@linux.intel.com> Tested-by: Kevin Hilman <khilman@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Kevin Hilman <khilman@linaro.org> Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org> Acked-by: Alan Stern <stern@rowland.harvard.edu>
2013-03-15ARM: 7675/1: amba: tegra-ahb: Fix build error w/ PM_SLEEP w/o PM_RUNTIMEHiroshi Doyu
Make this depend on CONFIG_PM. This protection is necessary to not cause any build errors with any combination of PM features especially when supporting a new SoC where each PM features are being enabled one-by-one during its depelopment. Signed-off-by: Hiroshi Doyu <hdoyu@nvidia.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-03-03Merge branch 'for-linus' of git://git.linaro.org/people/rmk/linux-armLinus Torvalds
Pull late ARM updates from Russell King: "Here is the late set of ARM updates for this merge window; in here is: - The ARM parts of the broadcast timer support, core parts merged through tglx's tree. This was left over from the previous merge to allow the dependency on tglx's tree to be resolved. - A fix to the VFP code which shows up on Raspberry Pi's, as well as fixing the fallout from a previous commit in this area. - A number of smaller fixes scattered throughout the ARM tree" * 'for-linus' of git://git.linaro.org/people/rmk/linux-arm: ARM: Fix broken commit 0cc41e4a21d43 corrupting kernel messages ARM: fix scheduling while atomic warning in alignment handling code ARM: VFP: fix emulation of second VFP instruction ARM: 7656/1: uImage: Error out on build of multiplatform without LOADADDR ARM: 7640/1: memory: tegra_ahb_enable_smmu() depends on TEGRA_IOMMU_SMMU ARM: 7654/1: Preserve L_PTE_VALID in pte_modify() ARM: 7653/2: do not scale loops_per_jiffy when using a constant delay clock ARM: 7651/1: remove unused smp_timer_broadcast #define
2013-02-21ARM: 7640/1: memory: tegra_ahb_enable_smmu() depends on TEGRA_IOMMU_SMMUHiroshi Doyu
New SoC, Tegra114 also uses SMMU. Change tegra_ahb_enable_smmu()'s dependency from ARCH_TEGRA_3x_SOC to TEGRA_IOMMU_SMMU. No need to edit whenever a new Tegra SoC comes. The following combination caused build error, which this patch fixes. CONFIG_ARCH_TEGRA_2x_SOC=y CONFIG_ARCH_TEGRA_114_SOC=y drivers/iommu/tegra-smmu.c:485: undefined reference to gra_ahb_enable_smmu' Signed-off-by: Hiroshi Doyu <hdoyu@nvidia.com> Tested-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-01-25amba: Convert to devm_ioremap_resource()Thierry Reding
Convert all uses of devm_request_and_ioremap() to the newly introduced devm_ioremap_resource() which provides more consistent error handling. devm_ioremap_resource() provides its own error messages so all explicit error messages can be removed from the failure code paths. Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de> Cc: Russell King <linux@arm.linux.org.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-03Drivers: amba: remove __dev* attributes.Greg Kroah-Hartman
CONFIG_HOTPLUG is going away as an option. As a result, the __dev* markings need to be removed, as well as the use of CONFIG_HOTPLUG. This patch does both, removing the use of CONFIG_HOTPLUG in the amba/bus.c file, and __devinit and __devinitconst in the tegra-ahb.c driver. Cc: Bill Pemberton <wfp5p@virginia.edu> Cc: Russell King <linux@arm.linux.org.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-12-17Merge tag 'tegra-for-3.8-fixes-for-rc1' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/swarren/linux-tegra into fixes ARM: tegra: fixes for 3.8 This branch contains a few miscellaneous fixes that have shown up in the last few weeks. By Sivaram Nair (2) and Hiroshi Doyu (1) via Stephen Warren * tag 'tegra-for-3.8-fixes-for-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/swarren/linux-tegra: amba: tegra-ahb: Fix warning w/o PM_SLEEP ARM: tegra: fix comment in dsib clk set_parent ARM: tegra: select correct parent clk for pll_p Signed-off-by: Olof Johansson <olof@lixom.net>
2012-12-12Merge tag 'cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds
Pull ARM SoC cleanups on various subarchitectures from Olof Johansson: "Cleanup patches for various ARM platforms and some of their associated drivers. There's also a branch in here that enables Freescale i.MX to be part of the multiplatform support -- the first "big" SoC that is moved over (more multiplatform work comes in a separate branch later during the merge window)." Conflicts fixed as per Olof, including a silent semantic one in arch/arm/mach-omap2/board-generic.c (omap_prcm_restart() was renamed to omap3xxx_restart(), and a new user of the old name was added). * tag 'cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (189 commits) ARM: omap: fix typo on timer cleanup ARM: EXYNOS: Remove unused regs-mem.h file ARM: EXYNOS: Remove unused non-dt support for dwmci controller ARM: Kirkwood: Use hw_pci.ops instead of hw_pci.scan ARM: OMAP3: cm-t3517: use GPTIMER for system clock ARM: OMAP2+: timer: remove CONFIG_OMAP_32K_TIMER ARM: SAMSUNG: use devm_ functions for ADC driver ARM: EXYNOS: no duplicate mask/unmask in eint0_15 ARM: S3C24XX: SPI clock channel setup is fixed for S3C2443 ARM: EXYNOS: Remove i2c0 resource information and setting of device names ARM: Kirkwood: checkpatch cleanups ARM: Kirkwood: Fix sparse warnings. ARM: Kirkwood: Remove unused includes ARM: kirkwood: cleanup lsxl board includes ARM: integrator: use BUG_ON where possible ARM: integrator: push down SC dependencies ARM: integrator: delete static UART1 mapping ARM: integrator: delete SC mapping on the CP ARM: integrator: remove static CP syscon mapping ARM: integrator: remove static AP syscon mapping ...
2012-12-03ARM: 7588/1: amba: create a resource parent registratorLinus Walleij
This creates amba_apb_device_add_res() and amba_ahb_device_add_res() respectively, to add devices with another parent than iomem_resource. This is needed to specify that a device is contained in a specific IO range. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-11-26amba: tegra-ahb: Fix warning w/o PM_SLEEPHiroshi Doyu
Fix build warning w/o PM_SLEEP. Signed-off-by: Hiroshi Doyu <hdoyu@nvidia.com> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-11-05ARM: tegra: move tegra-ahb.h out of arch/arm/mach-tegra/Stephen Warren
We wish to empty arch/arm/mach-tegra/include/mach/ as much as possible to enable single zImage. Move tegra-ahb.h to a more central location (suggested by Arnd, OK'd by Greg KH), and actually make tegra-ahb.c include the header to ensure client and provider agree on the prototype. Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-07-27Merge branch 'for-linus' of git://git.linaro.org/people/rmk/linux-armLinus Torvalds
Pull ARM updates from Russell King: "First ARM push of this merge window, post me coming back from holiday. This is what has been in linux-next for the last few weeks. Not much to say which isn't described by the commit summaries." * 'for-linus' of git://git.linaro.org/people/rmk/linux-arm: (32 commits) ARM: 7463/1: topology: Update cpu_power according to DT information ARM: 7462/1: topology: factorize the update of sibling masks ARM: 7461/1: topology: Add arch_scale_freq_power function ARM: 7456/1: ptrace: provide separate functions for tracing syscall {entry,exit} ARM: 7455/1: audit: move syscall auditing until after ptrace SIGTRAP handling ARM: 7454/1: entry: don't bother with syscall tracing on ret_from_fork path ARM: 7453/1: audit: only allow syscall auditing for pure EABI userspace ARM: 7452/1: delay: allow timer-based delay implementation to be selected ARM: 7451/1: arch timer: implement read_current_timer and get_cycles ARM: 7450/1: dcache: select DCACHE_WORD_ACCESS for little-endian ARMv6+ CPUs ARM: 7449/1: use generic strnlen_user and strncpy_from_user functions ARM: 7448/1: perf: remove arm_perf_pmu_ids global enumeration ARM: 7447/1: rwlocks: remove unused branch labels from trylock routines ARM: 7446/1: spinlock: use ticket algorithm for ARMv6+ locking implementation ARM: 7445/1: mm: update CONTEXTIDR register to contain PID of current process ARM: 7444/1: kernel: add arch-timer C3STOP feature ARM: 7460/1: remove asm/locks.h ARM: 7439/1: head.S: simplify initial page table mapping ARM: 7437/1: zImage: Allow DTB command line concatenation with ATAG_CMDLINE ARM: 7436/1: Do not map the vectors page as write-through on UP systems ...
2012-06-28ARM: 7431/1: amba: use the new linux/sizes.hAlessandro Rubini
Signed-off-by: Alessandro Rubini <rubini@gnudd.com> Acked-by: Giancarlo Asnaghi <giancarlo.asnaghi@st.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Cc: Alan Cox <alan@linux.intel.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-06-11amba: tegra-ahb: Remove empty *_remove()hdoyu@nvidia.com
Remove unnecessary empty function. Signed-off-by: Hiroshi DOYU <hdoyu@nvidia.com> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-05-26Merge tag 'drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds
Pull arm-soc driver specific updates from Olof Johansson: "These changes are specific to some driver that may be used by multiple boards or socs. The most significant change in here is the move of the samsung iommu code from a platform specific in-kernel interface to the generic iommu subsystem." Fix up trivial conflicts in arch/arm/mach-exynos/Kconfig * tag 'drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (28 commits) mmc: dt: Consolidate DT bindings iommu/exynos: Add iommu driver for EXYNOS Platforms ARM: davinci: optimize the DMA ISR ARM: davinci: implement DEBUG_LL port choice ARM: tegra: Add SMMU enabler in AHB ARM: tegra: Add Tegra AHB driver Input: pxa27x_keypad add choice to set direct_key_mask Input: pxa27x_keypad direct key may be low active Input: pxa27x_keypad bug fix for direct_key_mask Input: pxa27x_keypad keep clock on as wakeup source ARM: dt: tegra: pinmux changes for USB ULPI ARM: tegra: add USB ULPI PHY reset GPIO to device tree ARM: tegra: don't hard-code USB ULPI PHY reset_gpio ARM: tegra: change pll_p_out4's rate to 24MHz ARM: tegra: fix pclk rate ARM: tegra: reparent sclk to pll_c_out1 ARM: tegra: Add pllc clock init table ARM: dt: tegra cardhu: basic audio support ARM: dt: tegra30.dtsi: Add audio-related nodes ARM: tegra: add AUXDATA required for audio ...
2012-05-08ARM: tegra: Add SMMU enabler in AHBHiroshi DOYU
Add extern func, "tegra_ahb_enable_smmu()" to inform AHB that SMMU is ready. Signed-off-by: Hiroshi DOYU <hdoyu@nvidia.com> Cc: Felipe Balbi <balbi@ti.com> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-05-08ARM: tegra: Add Tegra AHB driverHiroshi DOYU
Tegra AHB Bus conforms to the AMBA Specification (Rev 2.0) Advanced High-performance Bus (AHB) architecture. The AHB Arbiter controls AHB bus master arbitration. This effectively forms a second level of arbitration for access to the memory controller through the AHB Slave Memory device. The AHB pre-fetch logic can be configured to enhance performance for devices doing sequential access. Each AHB master is assigned to either the high or low priority bin. Both Tegra20/30 have this AHB bus. Some of configuration params could be passed from DT too if needed. Signed-off-by: Hiroshi DOYU <hdoyu@nvidia.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Cc: Felipe Balbi <balbi@ti.com> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-05-03AMBA: get rid of last two uses of NO_IRQRussell King
This gets rid of the last two users of NO_IRQ in AMBA primecell drivers. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-04-19ARM: 7369/1: amba: add functions to add devices dynamicallyLinus Walleij
Add two functions to add APB and AHB devices to the amba (PrimeCell) bus dynamically. This is modeled after the static definition macros recently introduced into <linux/amba/bus.h> and can help us in factoring out a bunch of code across the kernel. Since a lot of call sites seem to be using a returned struct amba device* pointer, let's use that. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-04-13ARM: 7366/3: amba: Remove AMBA level regulator supportMark Brown
The AMBA bus regulator support is being used to model on/off switches for power domains which isn't terribly idiomatic for modern kernels with the generic power domain code and creates integration problems on platforms which don't use regulators for their power domains as it's hard to tell the difference between a regulator that is needed but failed to be provided and one that isn't supposed to be there (though DT does make that easier). Platforms that wish to use the regulator API to manage their power domains can indirect via the power domain interface. This feature is only used with the vape supply of the db8500 PRCMU driver which supplies the UARTs and MMC controllers, none of which have support for managing vcore at runtime in mainline (only pl022 SPI controller does). Update that supply to have an always_on constraint until the power domain support for the system is updated so that it is enabled for these users, this is likely to have no impact on practical systems as probably at least one of these devices will be active and cause AMBA to hold the supply on anyway. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Tested-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-01-25ARM: amba: make use of -1 IRQs warnRussell King
Make the core warn about the use of -1 (NO_IRQ) Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-01-25ARM: amba: make irq 0 invalidRussell King
Fix core bus and MMCI such that irq 0 means that there is no IRQ attached. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-01-25ARM: amba: add amba_device allocation/add/put functionsRussell King
Add functions to allocate and initialize AMBA device structures, and add them to the Linux device manager. This allows us to kill this type of operation from individual platforms, moving it to core code. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-01-08Merge branch 'pm-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm * 'pm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (76 commits) PM / Hibernate: Implement compat_ioctl for /dev/snapshot PM / Freezer: fix return value of freezable_schedule_timeout_killable() PM / shmobile: Allow the A4R domain to be turned off at run time PM / input / touchscreen: Make st1232 use device PM QoS constraints PM / QoS: Introduce dev_pm_qos_add_ancestor_request() PM / shmobile: Remove the stay_on flag from SH7372's PM domains PM / shmobile: Don't include SH7372's INTCS in syscore suspend/resume PM / shmobile: Add support for the sh7372 A4S power domain / sleep mode PM: Drop generic_subsys_pm_ops PM / Sleep: Remove forward-only callbacks from AMBA bus type PM / Sleep: Remove forward-only callbacks from platform bus type PM: Run the driver callback directly if the subsystem one is not there PM / Sleep: Make pm_op() and pm_noirq_op() return callback pointers PM/Devfreq: Add Exynos4-bus device DVFS driver for Exynos4210/4212/4412. PM / Sleep: Merge internal functions in generic_ops.c PM / Sleep: Simplify generic system suspend callbacks PM / Hibernate: Remove deprecated hibernation snapshot ioctls PM / Sleep: Fix freezer failures due to racy usermodehelper_is_disabled() ARM: S3C64XX: Implement basic power domain support PM / shmobile: Use common always on power domain governor ... Fix up trivial conflict in fs/xfs/xfs_buf.c due to removal of unused XBT_FORCE_SLEEP bit
2011-12-21PM / Sleep: Remove forward-only callbacks from AMBA bus typeRafael J. Wysocki
The forward-only PM callbacks provided by the AMBA bus type are not necessary any more, because the PM core executes driver callbacks when the corresponding subsystem callbacks are not present, so drop them. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2011-11-22ARM: amba: Auto-generate AMBA driver module aliases during modpostDave Martin
This patch adds the necessary support in file2alias.c to define suitable aliases based on the amba_id table in AMBA driver modules. This should be sufficient to allow such modules to be auto-loaded via udev. The AMBA bus driver's uevent hotplug code is also modified to pass an approriate MODALIAS string in the event. For simplicity, the AMBA ID is treated an an opaque 32-bit numeber. Module alises use patterns as appropriate to describe the value- mask pairs described in the driver's amba_id list. The proposed alias format is (extended regex): ^amba:d(HEX){8}$ Where HEX is a single upper-case HEX digit or a pattern (? or [] expression) matching a single upper-case HEX digit, as expected by udev. "d" is short for "device", following existing alias naming conventions for other device types. This adds some flexibility for unambiguously extending the alias format in the future by adding additional leading and trailing fields, if this turns out to be necessary. Signed-off-by: Dave Martin <dave.martin@linaro.org> Acked-by: Pawel Moll <pawel.moll@arm.com>
2011-09-27clk: amba bus: convert to clk_prepare()/clk_unprepare()Russell King
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-09-22PM: add runtime PM support to core Primecell driverRussell King
Add runtime PM support to the core Primecell driver, following the PCI model of how this is done. Rather than having every driver fiddle about with enabling runtime PM, that's dealt with in the core and instead, drivers just do a put() in their probe and a balancing get() in their remove function to activate runtime PM for the device. As we're dealing with enabling runtime PM in the core, fix up spi-pl022 as it must not enable and disable runtime PM itself anymore. Tested-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-05-26ARM: 6829/1: amba: make hardcoded periphid override hardwareLinus Walleij
This makes a hardcoded periphid from the platform override any magic number found in the hardware. This shall henceforth be used when the information found in the hardware is either missing, i.e. not encoding the CID with the magic cookie 0xb105f00d, or incorrect such that the revision number should have been bumped in hardware, but the silicon designer has failed to do so. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-04-11PM / Hibernate: Introduce CONFIG_HIBERNATE_CALLBACKSRafael J. Wysocki
Xen save/restore is going to use hibernate device callbacks for quiescing devices and putting them back to normal operations and it would need to select CONFIG_HIBERNATION for this purpose. However, that also would cause the hibernate interfaces for user space to be enabled, which might confuse user space, because the Xen kernels don't support hibernation. Moreover, it would be wasteful, as it would make the Xen kernels include a substantial amount of code that they would never use. To address this issue introduce new power management Kconfig option CONFIG_HIBERNATE_CALLBACKS, such that it will only select the code that is necessary for the hibernate device callbacks to work and make CONFIG_HIBERNATION select it. Then, Xen save/restore will be able to select CONFIG_HIBERNATE_CALLBACKS without dragging the entire hibernate code along with it. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Tested-by: Shriram Rajagopalan <rshriram@cs.ubc.ca>
2011-03-31Fix common misspellingsLucas De Marchi
Fixes generated by 'codespell' and manually reviewed. Signed-off-by: Lucas De Marchi <lucas.demarchi@profusion.mobi>
2011-02-23ARM: 6758/1: amba: support pm opsRabin Vincent
Support pm_ops in the AMBA bus, required to allow drivers to use runtime pm. The implementation of AMBA bus pm ops is based on the platform bus implementation. Acked-by: Rafael J. Wysocki <rjw@sisk.pl> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-02-23ARM: amba: make internal ID table handling constRussell King
As all probe() functions now take a const pointer, we can make the bus level code deal with const pointers too. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-02-23ARM: 6662/1: amba: make amba_bustype non-staticRob Herring
Export amba_bustype struct so it can be used for things like registering bus notifiers. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-11-26ARM: 6467/1: amba: optional PrimeCell core voltage switchLinus Walleij
On some contemporary sub-micron SoCs, peripherals on the chip have power domain switches, i.e. the voltage to the core may be turned off to conserve power. In the Ux500 we have this for out PrimeCell derivates. This patch makes it possible to specify an (optional) regulator to handle the voltage domain switch on AMBA PrimeCells, modeled very similar to how block clocks are handled. Additional amba_vcore_[enable|disable] calls are supplied to make it possible introduce optional powering off of the core voltage. Using this will require code to spool/unspool any core HW state. Cc: Rabin Vincent <rabin.vincent@stericsson.com> Cc: Bengt Jonsson <bengt.g.jonsson@stericsson.com> Cc: Jonas Aaberg <jonas.aberg@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-10-08ARM: 6368/1: move the PrimeCell IDs to use macrosLinus Walleij
This make four macros for the PrimeCell ID register available to drivers that use them witout using the PrimeCell/AMBA bus abstraction and struct amba_device. It also moves the magic PrimeCell CID "B105F00D" to the bus.h header file. Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-07-31ARM: AMBA: Add pclk support to AMBA bus infrastructureRussell King
Some platforms gate the pclk (APB - the bus - clock) to the peripherals for power saving, along with the functional clock. When devices are accessed without pclk enabled, the kernel will oops. This gives them two options: 1. Leave all clocks on all the time. 2. Attempt to gate pclk along with the functional clock. (With some hardware, pclk and the functional clock are gated by a single bit in a register.) (1) has the disadvantage that it causes increased power usage, which is bad news for battery operated devices. (2) can lead to kernel oops if registers are accessed without the functional clock being enabled. So, introduce the apb_pclk signal in such a way existing drivers don't need to be updated. Essentially, this means we guarantee that: 1. pclk will be enabled whenever the driver is bound to a device - from probe() to remove() time. 2. pclk will also be enabled when reading the primecell IDs from the device. In order to allow drivers to be incrementally updated to achieve greater power savings, we provide two additional calls to allow drivers to manage the pclk - amba_pclk_enable()/amba_pclk_disable(). Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-09-12Merge branches 'arm', 'at91', 'bcmring', 'ep93xx', 'mach-types', 'misc' and ↵Russell King
'w90x900' into devel
2009-09-02ARM: 5625/1: fix hard coded 4K resource size in amba bus detectionLeo Chen
This patch modifies the amba bus detection logic in the kernel to detect the AMBA devices using the calculated resource size information rather than the hard coded 4K size. It also calculates the resource size when request mem region and release mem region. Signed-off-by: Leo Chen <leochen@broadcom.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-07-05[ARM] amba: fix amba device resourcesRussell King
AMBA device resources were being reported as: 10004000-10004fff : <BAD> This is because dev_name() was returning NULL prior to device_register. Ensure that the struct device is properly initialized, and the name is set before adding it to the device tree. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-03-24amba: struct device - replace bus_id with dev_name(), dev_set_name()Kay Sievers
Acked-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Kay Sievers <kay.sievers@vrfy.org>
2009-01-08[ARM] Fix realview buildRussell King
arch/arm/mach-realview/platsmp.c:140: error: 'jiffies' undeclared (first use in this function) drivers/amba/bus.c:246: error: 'NO_IRQ' undeclared (first use in this function) Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-10-12Driver core: change add_uevent_var to use a structKay Sievers
This changes the uevent buffer functions to use a struct instead of a long list of parameters. It does no longer require the caller to do the proper buffer termination and size accounting, which is currently wrong in some places. It fixes a known bug where parts of the uevent environment are overwritten because of wrong index calculations. Many thanks to Mathieu Desnoyers for finding bugs and improving the error handling. Signed-off-by: Kay Sievers <kay.sievers@vrfy.org> Cc: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca> Cc: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-04-27uevent: use add_uevent_var() instead of open coding itEric Rannaud
Make use of add_uevent_var() instead of (often incorrectly) open coding it. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Eric Rannaud <eric.rannaud@gmail.com> Cc: Kay Sievers <kay.sievers@vrfy.org> Cc: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-11-30[ARM] Fix __must_check warnings in drivers/bus/amba.cRussell King
Fix driver model __must_check warnings in drivers/bus/amba.c by rearranging how we add attributes to devices. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-06-27[PATCH] 64bit resource: fix up printks for resources in misc driversGreg Kroah-Hartman
This is needed if we wish to change the size of the resource structures. Based on an original patch from Vivek Goyal <vgoyal@in.ibm.com> Cc: Vivek Goyal <vgoyal@in.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>