aboutsummaryrefslogtreecommitdiff
path: root/drivers/hid
AgeCommit message (Collapse)Author
2013-01-31USB: HID: Steelseries SRW-S1 Add support for dialsSimon Wood
This patch to the SRW-S1 driver re-writes the HID descriptor to insert a section for the 3 dials on the device, previously these were contained within a 'Manufacturer Specific' usage page. Signed-off-by: Simon Wood <simon@mungewell.org> Tested-by: John Murphy <rosegardener@freeode.co.uk> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2013-01-31USB: HID: SRW-S1 Gaming Wheel DriverSimon Wood
Add support the SRW-S1 by patching HID descriptor to read axis as Generic Desktop X, Y and Z (rather than Usage page being 'Simulation'). Signed-off-by: Simon Wood <simon@mungewell.org> Tested-by: John Murphy <rosegardener@freeode.co.uk> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2013-01-29Merge branch 'master' into for-nextJiri Kosina
Conflicts: drivers/devfreq/exynos4_bus.c Sync with Linus' tree to be able to apply patches that are against newer code (mvneta).
2013-01-25Drivers: hid: hid-hyperv: Use consolidated GUID definitionsK. Y. Srinivasan
Use the consolidated GUID definitions in the Hyper-V mouse driver. Signed-off-by: K. Y. Srinivasan <kys@microsoft.com> Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com> Acked-by: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-24Merge branch 'v4l_for_linus' into staging/for_v3.9Mauro Carvalho Chehab
* v4l_for_linus: (464 commits) [media] uvcvideo: Set error_idx properly for S_EXT_CTRLS failures [media] uvcvideo: Cleanup leftovers of partial revert [media] uvcvideo: Return -EACCES when trying to set a read-only control Linux 3.8-rc3 mm: reinstante dropped pmd_trans_splitting() check cred: Remove tgcred pointer from struct cred drm/ttm: fix fence locking in ttm_buffer_object_transfer ARM: clps711x: Fix bad merge of clockevents setup ARM: highbank: save and restore L2 cache and GIC on suspend ARM: highbank: add a power request clear ARM: highbank: fix secondary boot and hotplug ARM: highbank: fix typos with hignbank in power request functions ARM: dts: fix highbank cpu mpidr values ARM: dts: add device_type prop to cpu nodes on Calxeda platforms drm/prime: drop reference on imported dma-buf come from gem xen/netfront: improve truesize tracking ARM: mx5: Fix MX53 flexcan2 clock ARM: OMAP2+: am33xx-hwmod: Fix wrongly terminated am33xx_usbss_mpu_irqs array sctp: fix Kconfig bug in default cookie hmac selection EDAC: Cleanup device deregistering path ... Conflicts: drivers/media/pci/dm1105/dm1105.c drivers/media/platform/soc_camera/mx2_camera.c
2013-01-22HID: clean up quirk for Sony RF receiversFernando Luis Vázquez Cao
Document what the fix-up is does and make it more robust by ensuring that it is only applied to the USB interface that corresponds to the mouse (sony_report_fixup() is called once per interface during probing). Cc: linux-input@vger.kernel.org Cc: linux-usb@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Fernando Luis Vazquez Cao <fernando@oss.ntt.co.jp> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2013-01-18HID: i2c-hid: add ACPI supportMika Westerberg
The HID over I2C protocol specification states that when the device is enumerated from ACPI the HID descriptor address can be obtained by executing "_DSM" for the device with function 1. Enable this. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2013-01-18HID: Fix uninitialized variable "size" in hid-wiimote-debugSimon Que
This variable is initialized conditionally, based on whether a wiimote call succeeds. However, the logic is not obvious to the compiler so it throws a warning. Eliminate the warning by initializing "size" to 0. The warning is: files/drivers/hid/hid-wiimote-debug.c:69:18: warning: 'size' may be used uninitialized in this function [-Wmaybe-uninitialized] Signed-off-by: Simon Que <sque@chromium.org> Signed-off-by: David Herrmann <dh.herrmann@googlemail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2013-01-17HID: Support Jess/Saitek Color Rumble PadMichael Karcher
Add support for another gamepad to the hid-pl driver. The "color rumble pad P580" marketed using the "Saitek" brand in Germany, and using a USB Vendor ID attributed to "Jess" seems to be electronically identical to the 4-field variant of the "Green Asia" gamepad. The pad has been tested to support rumble strengths up to 255, not just 127. Signed-off-by: Michael Karcher <kernel@mkarcher.dialup.fu-berlin.de> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2013-01-15HID: add support for Sony RF receiver with USB product id 0x0374Fernando Luis Vázquez Cao
Some Vaio desktop computers, among them the VGC-LN51JGB multimedia PC, have a RF receiver, multi-interface USB device 054c:0374, that is used to connect a wireless keyboard and a wireless mouse. The keyboard works flawlessly, but the mouse (VGP-WMS3 in my case) does not seem to be generating any pointer events. The problem is that the mouse pointer is wrongly declared as a constant non-data variable in the report descriptor (see lsusb and usbhid-dump output below), with the consequence that it is ignored by the HID code. Add this device to the have-special-driver list and fix up the report descriptor in the Sony-specific driver which happens to already have a fixup for a similar firmware bug. # lsusb -vd 054C:0374 Bus 003 Device 002: ID 054c:0374 Sony Corp. Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 2.00 bDeviceClass 0 (Defined at Interface level) bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 8 idVendor 0x054c Sony Corp. idProduct 0x0374 iSerial 0 [...] Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 1 bAlternateSetting 0 bNumEndpoints 1 bInterfaceClass 3 Human Interface Device bInterfaceSubClass 1 Boot Interface Subclass bInterfaceProtocol 2 Mouse iInterface 2 RF Receiver [...] Report Descriptor: (length is 100) [...] Item(Global): Usage Page, data= [ 0x01 ] 1 Generic Desktop Controls Item(Local ): Usage, data= [ 0x30 ] 48 Direction-X Item(Local ): Usage, data= [ 0x31 ] 49 Direction-Y Item(Global): Report Count, data= [ 0x02 ] 2 Item(Global): Report Size, data= [ 0x08 ] 8 Item(Global): Logical Minimum, data= [ 0x81 ] 129 Item(Global): Logical Maximum, data= [ 0x7f ] 127 Item(Main ): Input, data= [ 0x07 ] 7 Constant Variable Relative No_Wrap Linear Preferred_State No_Null_Position Non_Volatile Bitfield # usbhid-dump 003:002:001:DESCRIPTOR 1357910009.758544 05 01 09 02 A1 01 05 01 09 02 A1 02 85 01 09 01 A1 00 05 09 19 01 29 05 95 05 75 01 15 00 25 01 81 02 75 03 95 01 81 01 05 01 09 30 09 31 95 02 75 08 15 81 25 7F 81 07 A1 02 85 01 09 38 35 00 45 00 15 81 25 7F 95 01 75 08 81 06 C0 A1 02 85 01 05 0C 15 81 25 7F 95 01 75 08 0A 38 02 81 06 C0 C0 C0 C0 Cc: linux-input@vger.kernel.org Cc: linux-usb@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Fernando Luis Vazquez Cao <fernando@oss.ntt.co.jp> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2013-01-03Drivers: misc: remove __dev* attributes.Greg Kroah-Hartman
CONFIG_HOTPLUG is going away as an option. As a result, the __dev* markings need to be removed. This change removes the use of __devinit, __devexit_p, __devinitdata, __devinitconst, and __devexit from these drivers. Based on patches originally written by Bill Pemberton, but redone by me in order to handle some of the coding style issues better, by hand. Cc: Bill Pemberton <wfp5p@virginia.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-03treewide: Replace incomming with incoming in all comments and stringsJorrit Schippers
Signed-off-by: Jorrit Schippers <jorrit@ncode.nl> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2013-01-03HID: usbhid: quirk for Formosa IR receiverNicholas Santos
Patch to add the Formosa Industrial Computing, Inc. Infrared Receiver [IR605A/Q] to hid-ids.h and hid-quirks.c. This IR receiver causes about a 10 second timeout when the usbhid driver attempts to initialze the device. Adding this device to the quirks list with HID_QUIRK_NO_INIT_REPORTS removes the delay. Signed-off-by: Nicholas Santos <nicholas.santos@gmail.com> [jkosina@suse.cz: fix ordering] Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2013-01-03HID: hid-sony: fix troubles with Sony remote clonesMauro Carvalho Chehab
There are some Sony clone gamepads that are incompatible with PS3 since firmware 3.50, as they decided to prevent those devices to work, without any good technical reason. I was one of those 'blessed' people affected by their niceness with their customers. Marcelo also has another device with a similar problem. Perhaps due to Sony's way to block the device, damaging the device's eeprom, or perhaps because they just have a different, broken Report descriptor, there are 3 buttons that don't work on both devices (the ones equivalent to square, round and X). What it happens is that the descriptor generate weird EV_ABS events to those buttons, instead of EV_MSC/EV_KEY. A fix that seems to be enough for them is to return the original sixaxis table instead of the broken one. That's what this patch does. Yet, there are some missing entries at the used keytable. On my tests, all keys are now producing the right events, but the reported keycodes look weird: "square" key: (Button.0010 = 1) 1355524363.460835: event type EV_MSC(0x04): scancode = 0x90010 1355524363.460835: event type EV_KEY(0x01) key_up: BTN_DEAD(0x0001) "round" key: (Button.000e = 1) 1355524410.908705: event type EV_MSC(0x04): scancode = 0x9000e 1355524410.908705: event type EV_KEY(0x01) key_down: (0x0001) 1355524410.971788: event type EV_MSC(0x04): scancode = 0x9000e 1355524410.971788: event type EV_KEY(0x01) key_up: (0x0001) "X" key: (Button.000f = 1) 1355524384.880813: event type EV_MSC(0x04): scancode = 0x9000f 1355524384.880813: event type EV_KEY(0x01) key_down: (0x0001) 1355524384.979815: event type EV_MSC(0x04): scancode = 0x9000f 1355524384.979815: event type EV_KEY(0x01) key_up: (0x0001) The rationale is likely due to those entries at rdesc table, where the Kernel were not likely able to parse: Button.000d ---> Key.? Button.000e ---> Key.? Button.000f ---> Key.? Button.0010 ---> Key.BtnDead Button.0011 ---> Key.? Button.0012 ---> Key.? Button.0013 ---> Key.? As a reference, this is the rdisc used on my clone (a Mad Catz model 8846): 05 01 09 04 a1 01 a1 02 85 01 75 08 95 01 15 00 26 ff 00 81 03 75 01 95 0d 15 00 25 01 35 00 45 01 05 09 19 01 29 0d 81 02 75 01 95 03 06 00 ff 81 03 05 01 25 07 46 3b 01 75 04 95 01 65 14 09 39 81 42 65 00 75 01 95 0c 06 00 ff 81 03 15 00 26 ff 00 05 01 09 01 a1 00 75 08 95 04 15 00 15 00 15 00 35 00 35 00 46 ff 00 09 30 09 31 09 32 09 35 81 02 c0 05 01 75 08 95 27 09 01 81 02 75 08 95 30 09 01 91 02 75 08 95 30 09 01 b1 02 c0 a1 02 85 02 75 08 95 30 09 01 b1 02 c0 a1 02 85 ee 75 08 95 30 09 01 b1 02 c0 a1 02 85 ef 75 08 95 30 09 01 b1 02 c0 c0 This is what's returned on Marcelo's device (not sure what is the brand name of his device): 05 01 09 04 a1 01 a1 02 85 01 75 08 95 01 15 00 26 ff 00 81 03 75 01 95 13 15 00 25 01 35 00 45 01 05 09 19 01 29 13 81 02 75 01 95 0d 06 00 ff 81 03 15 00 26 ff 00 05 01 09 01 a1 00 75 08 95 04 35 00 46 ff 00 09 30 09 31 09 32 09 35 81 02 c0 05 01 95 13 09 01 81 02 95 0c 81 01 75 10 95 04 26 ff 03 46 ff 03 09 01 81 02 c0 a1 02 85 02 75 08 95 30 09 01 b1 02 c0 a1 02 85 ee 75 08 95 30 09 01 b1 02 c0 a1 02 85 ef 75 08 95 30 09 01 b1 02 c0 c0 Reported-by: Marcelo Leitner <mleitner@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org> Tested-by: Marcelo Leitner <mleitner@redhat.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2013-01-03HID: Use module_hid_driver macroH Hartley Sweeten
Use the new module_hid_driver macro in all HID drivers that have a simple register/unregister init/exit. This also converts the hid drivers that test for a failure of hid_register_driver() and report the failure. Using module_hid_driver in those drivers removes the failure message. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-12-28[hid] usb hid quirks for Masterkit MA901 usb radioAlexey Klimov
Don't let Masterkit MA901 USB radio be handled by usb hid drivers. This device will be handled by radio-ma901.c driver. Signed-off-by: Alexey Klimov <klimov.linux@gmail.com> Acked-by: Hans Verkuil <hans.verkuil@cisco.com> Acked-by: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-12-13Merge branch 'v4l_for_linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media Pull media updates from Mauro Carvalho Chehab: - Missing MAINTAINERS entries were added for several drivers - Adds V4L2 support for DMABUF handling, allowing zero-copy buffer sharing between V4L2 devices and GPU - Got rid of all warnings when compiling with W=1 on x86 - Add a new driver for Exynos hardware (s3c-camif) - Several bug fixes, cleanups and driver improvements * 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (243 commits) [media] omap3isp: Replace cpu_is_omap3630() with ISP revision check [media] omap3isp: Prepare/unprepare clocks before/after enable/disable [media] omap3isp: preview: Add support for 8-bit formats at the sink pad [media] omap3isp: Replace printk with dev_* [media] omap3isp: Find source pad from external entity [media] omap3isp: Configure CSI-2 phy based on platform data [media] omap3isp: Add PHY routing configuration [media] omap3isp: Add CSI configuration registers from control block to ISP resources [media] omap3isp: Remove unneeded module memory address definitions [media] omap3isp: Use monotonic timestamps for statistics buffers [media] uvcvideo: Fix control value clamping for unsigned integer controls [media] uvcvideo: Mark first output terminal as default video node [media] uvcvideo: Add VIDIOC_[GS]_PRIORITY support [media] uvcvideo: Return -ENOTTY for unsupported ioctls [media] uvcvideo: Set device_caps in VIDIOC_QUERYCAP [media] uvcvideo: Don't fail when an unsupported format is requested [media] uvcvideo: Return -EACCES when trying to access a read/write-only control [media] uvcvideo: Set error_idx properly for extended controls API failures [media] rtl28xxu: add NOXON DAB/DAB+ USB dongle rev 2 [media] fc2580: write some registers conditionally ...
2012-12-12Merge branches 'for-3.7/upstream-fixes', 'for-3.8/hidraw', ↵Jiri Kosina
'for-3.8/i2c-hid', 'for-3.8/multitouch', 'for-3.8/roccat', 'for-3.8/sensors' and 'for-3.8/upstream' into for-linus Conflicts: drivers/hid/hid-core.c
2012-12-12HID: i2c-hid: add mutex protecting open/close raceBenjamin Tissoires
We should not enter close function while someone else is in open. This mutex prevents this race. There is also no need to override the ret value with -EIO in case of a failure of i2c_hid_set_power. Signed-off-by: Benjamin Tissoires <benjamin.tissoires@gmail.com> Reviewed-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-12-12Revert "HID: sensors: add to special driver list"Alexander Holler
Those IDs aren't necessary anymore. This reverts commit c8147d9ea19bfe7d8e569351bc7239e118dd6997. Signed-off-by: Alexander Holler <holler@ahsoftware.de> Acked-by: "Pandruvada, Srinivas" <srinivas.pandruvada@intel.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-12-12HID: sensors: autodetect USB HID sensor hubsAlexander Holler
It should not be necessary to add IDs for HID sensor hubs to lists in hid-core.c and hid-sensor-hub.c. So instead of a whitelist, autodetect such USB HID sensor hubs, based on a collection of type physical inside a useage page of type sensor. If some sensor hubs stil must be usable as raw devices, a blacklist might be created. Signed-off-by: Alexander Holler <holler@ahsoftware.de> Acked-by: "Pandruvada, Srinivas" <srinivas.pandruvada@intel.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-12-07HID: hidp: fallback to input session properly if hid is blacklistedLamarque V. Souza
This patch against kernel 3.7.0-rc8 fixes a kernel oops when turning on the bluetooth mouse with id 0458:0058 [1]. The mouse in question supports both input and hid sessions, however it is blacklisted in drivers/hid/hid-core.c so the input session is one that should be used. Long ago (around kernel 3.0.0) some changes in the bluetooth subsystem made the kernel do not fallback to input session when hid session is not supported or blacklisted. This patch restore that behaviour by making the kernel try the input session if hid_add_device returns ENODEV. The patch exports hid_ignore() from hid-core.c so that it can be used in the bluetooth subsystem. [1] https://bugzilla.kernel.org/show_bug.cgi?id=39882 Signed-off-by: Lamarque V. Souza <lamarque@gmail.com> Acked-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-12-06HID: i2c-hid: fix ret_count checkJiri Kosina
ret_count has to be at least 3, as we have to count the 2 bytes that are used for the size of the reply. Without this, memcpy() might be called with zero or negative count. Reported-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-12-06HID: i2c-hid: fix i2c_hid_get_raw_report count mismatchesBenjamin Tissoires
The previous memcpy implementation relied on the size advertized by the device. There were no guarantees that buf was big enough. Some gymnastic is also required with the +2/-2 to take into account the first 2 bytes of the returned buffer where the total returned length is supplied by the device. Signed-off-by: Benjamin Tissoires <benjamin.tissoires@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-12-06HID: i2c-hid: remove extra .irq field in struct i2c_hidBenjamin Tissoires
There is no point in keeping the irq in i2c_hid as it's already there in client. Signed-off-by: Benjamin Tissoires <benjamin.tissoires@gmail.com> Reviewed-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-12-06HID: i2c-hid: reorder allocation/free of buffersBenjamin Tissoires
Simplifies i2c_hid_alloc_buffers tests, and makes this function responsible of the assignment of ihid->bufsize. The condition for the reallocation in i2c_hid_start is then simpler. Signed-off-by: Benjamin Tissoires <benjamin.tissoires@gmail.com> Reviewed-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-12-06HID: i2c-hid: fix memory corruption due to missing hid declarationBenjamin Tissoires
HID descriptors contains 4 bytes of reserved field. The previous implementation was overriding the next fields in struct i2c_hid. Signed-off-by: Benjamin Tissoires <benjamin.tissoires@gmail.com> Reviewed-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-12-05HID: i2c-hid: remove superfluous includeJiri Kosina
The pointless WARN_ON() has been removed from i2c_hid_remove(), so we don't need bug.h any more. Reported-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-12-05HID: i2c-hid: remove unneeded test in i2c_hid_removeBenjamin Tissoires
ihid can not be null, so there are no reasons to test it. Signed-off-by: Benjamin Tissoires <benjamin.tissoires@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-12-05HID: i2c-hid: i2c_hid_get_report may failBenjamin Tissoires
If i2c_hid_get_report fails, exit i2c_hid_init_report. The printk log is already called by i2c_hid_get_report, so no need to add some more printks. Signed-off-by: Benjamin Tissoires <benjamin.tissoires@gmail.com> Reviewed-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-12-05HID: i2c-hid: also call i2c_hid_free_buffers in i2c_hid_removeBenjamin Tissoires
In the case where the hid driver in charge of handling the hid part of the device (hid-generic for instance) fails at probe, neither i2c_hid_start nor i2c_hid_stop are called. Thus, the buffers allocated in i2c_hid_probe are never freed. Signed-off-by: Benjamin Tissoires <benjamin.tissoires@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-12-05HID: i2c-hid: fix error messagesBenjamin Tissoires
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@gmail.com> Reviewed-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-12-05HID: i2c-hid: fix return pathsBenjamin Tissoires
Forwards appropriate return values. As noone use the error returned by i2c_hid_get_input, let's make it returning void. Signed-off-by: Benjamin Tissoires <benjamin.tissoires@gmail.com> Reviewed-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-12-05HID: i2c-hid: remove unused static declarationsBenjamin Tissoires
These definitions are not used here, but are defined by the specification. Keeping some of them for documentation purposes. Signed-off-by: Benjamin Tissoires <benjamin.tissoires@gmail.com> Reviewed-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-12-05HID: i2c-hid: fix i2c_hid_dbg macroBenjamin Tissoires
This avoids the problematic case: if (condition) i2c_hid_dbg(ihid, "Blah blah %d\n", i); else do_something_very_important(); Which looks correct, however with the previous macro definition, this expands to the unexpected: if (condition) { if (debug) \ dev_printk(KERN_DEBUG, &ihid->client->dev, "Blah blah %d\n", i); else do_something_very_important(); } Signed-off-by: Benjamin Tissoires <benjamin.tissoires@gmail.com> Reviewed-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-12-05HID: i2c-hid: fix checkpatch.pl warningBenjamin Tissoires
We should not initialize to 0 static declarations. Signed-off-by: Benjamin Tissoires <benjamin.tissoires@gmail.com> Reviewed-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-12-05HID: i2c-hid: enhance KconfigBenjamin Tissoires
The "comment" part can never be displayed, so we can remove it. Signed-off-by: Benjamin Tissoires <benjamin.tissoires@gmail.com> Reviewed-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-12-05HID: i2c-hid: change I2C nameBenjamin Tissoires
no I2C driver has "i2c" in its name. It makes more sense to call this i2c driver "hid". Signed-off-by: Benjamin Tissoires <benjamin.tissoires@gmail.com> Reviewed-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-12-02HID: Add Apple wireless keyboard 2011 ANSI to special driver listBen Hutchings
Commit 0a97e1e9f9a6 ('HID: apple: Add Apple wireless keyboard 2011 ANSI PID') did not update the special driver list in hid-core.c, so hid-generic may still bind to this device. Reported-by: Ari Pollak <ari@scvngr.com> References: http://bugs.debian.org/694546 Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Cc: <stable@vger.kernel.org> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-11-29HID: hid-input: factorize hid_input allocationBenjamin Tissoires
This just refactors the allocation of hid_input. No semantic changes. Signed-off-by: Benjamin Tissoires <benjamin.tissoires@gmail.com> Reviewed-by: Henrik Rydberg <rydberg@euromail.se> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-11-28HID: hidraw: fix signaling SIGIO when hidraw reports an eventAndrew Duggan
This patch fixes sending SIGIO from hidraw_report_event by creating a fasync handler which adds the fasync entry. Signed-off-by: Andrew Duggan <aduggan@synaptics.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-11-28Merge remote-tracking branch 'linus/master' into staging/for_v3.8Mauro Carvalho Chehab
* linus/master: (1428 commits) futex: avoid wake_futex() for a PI futex_q watchdog: using u64 in get_sample_period() writeback: put unused inodes to LRU after writeback completion mm: vmscan: check for fatal signals iff the process was throttled Revert "mm: remove __GFP_NO_KSWAPD" proc: check vma->vm_file before dereferencing UAPI: strip the _UAPI prefix from header guards during header installation include/linux/bug.h: fix sparse warning related to BUILD_BUG_ON_INVALID Linux 3.7-rc7 powerpc/eeh: Do not invalidate PE properly ALSA: hda - Fix build without CONFIG_PM of/address: sparc: Declare of_iomap as an extern function for sparc again PM / QoS: fix wrong error-checking condition bnx2x: remove redundant warning log vxlan: fix command usage in its doc 8139cp: revert "set ring address before enabling receiver" MPI: Fix compilation on MIPS with GCC 4.4 and newer MIPS: Fix crash that occurs when function tracing is enabled MIPS: Merge overlapping bootmem ranges jbd: Fix lock ordering bug in journal_unmap_buffer() ...
2012-11-28HID: hiddev: fix nonblocking read semantics wrt EIO/ERESTARTSYSJiri Kosina
When the file has been open in non-blocking mode, EIO or ERESTARTSYS would never be returned even if they should (for example when device has been unplugged, you want EIO and not EAGAIN to be returned). Move the O_NONBLOCK check after other checks have been performed. Base on similar patch done to hidraw by Founder Fang <founder.fang@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-11-26HID: add battery quirk for Apple 2009_ISO keyboardOrtwin Glück
Support battery capacity on another Apple wireless keyboard. Signed-off-by: Ortwin Glück <odi@odi.ch> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-11-26HID: add quirk for Freescale i.MX23 ROM recoveryMarek Vasut
The USB recovery mode present in i.MX23 ROM emulates USB HID. It needs this quirk to behave properly. Even if the official branding of the chip is Freescale i.MX23, I named it Sigmatel STMP3780 since that's what the chip really is and it even reports itself as STMP3780. Signed-off-by: Marek Vasut <marex@denx.de> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-11-26HID: hidraw: fix nonblock read return EAGAIN after device removedFounder Fang
When nonblock read the condition check (file->f_flags & O_NONBLOCK) always be true, signal_pending and device exist checking never get a chance to run, so the user mode code always get EAGAIN even if device removed. move nonblock mode checking to the last can fix this problem. Signed-off-by: Founder Fang <founder.fang@gmail.com> Reviewed-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-11-22HID: add support to novatec wireless mouseMarco Biscaro
This patch adds support to Novatec wireless mouse (device ID 0603:1602). Fixes bug https://bugzilla.kernel.org/show_bug.cgi?id=47031 Signed-off-by: Marco Biscaro <marcobiscaro2112@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-11-20HID: i2c-hid: fix memory leak during probeJiri Kosina
In case we are returning from i2c_hid_probe() through the 'err' or 'err_mem_free' labels, there is noone freeing the buffers allocated by i2c_hid_alloc_buffers(). Reviewed-by: Benjamin Tissoires <benjamin.tissoires@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-11-20HID: sensor-hub: Remove pointless NULL checkAlan Cox
report cannot be NULL, fortunately as we use it before we check ! Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-11-19HID: i2c-hid: introduce HID over i2c specification implementationBenjamin Tissoires
Microsoft published the protocol specification of HID over i2c: http://msdn.microsoft.com/en-us/library/windows/hardware/hh852380.aspx This patch introduces an implementation of this protocol. This implementation does not includes the ACPI part of the specification. This will come when ACPI 5.0 devices enumeration will be available. Once the ACPI part is done, OEM will not have to declare HID over I2C devices in their platform specific driver. Signed-off-by: Benjamin Tissoires <benjamin.tissoires@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
generated by cgit v1.2.3 (git 2.25.1) at 2024-07-05 14:43:42 +0000