aboutsummaryrefslogtreecommitdiff
path: root/drivers/hwmon
AgeCommit message (Collapse)Author
2012-01-08Merge branch 'hwmon-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging * 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: max1111.c: fix checkpatch warning hwmon: (lm75) fix checkpatch warnings hwmon: (lm80) fix checkpatch messages hwmon: replaced strict_str* with kstr* hwmon: (lm75) fix checkpatch warning hwmon: (lm75) added error handling hwmon: (ltc4261) set data->valid to 0 if error hwmon: (f75375s) Add support for F75387SG/RG hwmon: (f75375s) Disable setting DC fan control mode for F75373 hwmon: (f75375s) Initialize pwmX_mode and pwmX_enable if there is no platform data hwmon: (f75375s) Fix value range for PWM modes hwmon: (f75375s) Use standard sysfs attribute names hwmon: (f75375s) Fix checkpatch errors and warnings hwmon: (pmbus/zl6100) Only instantiate external temperature sensor if enabled hwmon: (pmbus/zl6100) Add support for Ericsson BMR45[0,1] and BMR46[2,3,4] hwmon: (pmbus/zl6100) Add support for ZL2005 hwmon: (pmbus/adm1275) Validate device ID
2012-01-08Merge branch 'for-linus2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs * 'for-linus2' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (165 commits) reiserfs: Properly display mount options in /proc/mounts vfs: prevent remount read-only if pending removes vfs: count unlinked inodes vfs: protect remounting superblock read-only vfs: keep list of mounts for each superblock vfs: switch ->show_options() to struct dentry * vfs: switch ->show_path() to struct dentry * vfs: switch ->show_devname() to struct dentry * vfs: switch ->show_stats to struct dentry * switch security_path_chmod() to struct path * vfs: prefer ->dentry->d_sb to ->mnt->mnt_sb vfs: trim includes a bit switch mnt_namespace ->root to struct mount vfs: take /proc/*/mounts and friends to fs/proc_namespace.c vfs: opencode mntget() mnt_set_mountpoint() vfs: spread struct mount - remaining argument of next_mnt() vfs: move fsnotify junk to struct mount vfs: move mnt_devname vfs: move mnt_list to struct mount vfs: switch pnode.h macros to struct mount * ...
2012-01-06Merge branch 'x86-apic-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip * 'x86-apic-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86: Skip cpus with apic-ids >= 255 in !x2apic_mode x86, x2apic: Allow "nox2apic" to disable x2apic mode setup by BIOS x86, x2apic: Fallback to xapic when BIOS doesn't setup interrupt-remapping x86, acpi: Skip acpi x2apic entries if the x2apic feature is not present x86, apic: Add probe() for apic_flat x86: Simplify code by removing a !SMP #ifdefs from 'struct cpuinfo_x86' x86: Convert per-cpu counter icr_read_retry_count into a member of irq_stat x86: Add per-cpu stat counter for APIC ICR read tries pci, x86/io-apic: Allow PCI_IOAPIC to be user configurable on x86 x86: Fix the !CONFIG_NUMA build of the new CPU ID fixup code support x86: Add NumaChip support x86: Add x86_init platform override to fix up NUMA core numbering x86: Make flat_init_apic_ldr() available
2012-01-05max1111.c: fix checkpatch warningFrans Meulenbroeks
Signed-off-by: Frans Meulenbroeks <fransmeulenbroeks@gmail.com> Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
2012-01-05hwmon: (lm75) fix checkpatch warningsFrans Meulenbroeks
Fix checkpatch warnings in lm75.h include file Signed-off-by: Frans Meulenbroeks <fransmeulenbroeks@gmail.com> Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
2012-01-05hwmon: (lm80) fix checkpatch messagesFrans Meulenbroeks
Fixed all checkpatch messages except simple_strto* -> kstr* This will be addressed in a separate patch Also left one line-too-long message as it was only a little bit too long and would become less readable compile-tested: no warnings or errors Signed-off-by: Frans Meulenbroeks <fransmeulenbroeks@gmail.com> Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
2012-01-05hwmon: replaced strict_str* with kstr*Frans Meulenbroeks
replaced strict_strtol with kstrtol and replaced strict_strtuol with kstrtuol This satisfies checkpatch -f Compile tested only: no warnings or errors given Signed-off-by: Frans Meulenbroeks <fransmeulenbroeks@gmail.com> Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
2012-01-05hwmon: (lm75) fix checkpatch warningFrans Meulenbroeks
Fixed this: WARNING: strict_strtol is obsolete, use kstrtol instead + error = strict_strtol(buf, 10, &temp); by replacing strict_strtol with kstrtol. Signed-off-by: Frans Meulenbroeks <fransmeulenbroeks@gmail.com> Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
2012-01-05hwmon: (lm75) added error handlingFrans Meulenbroeks
Add error handling so if lm75_update_device fails an error is returned when reading the value through sysfs. This is closely modeled after the way this is handled in ltc4261. Signed-off-by: Frans Meulenbroeks <fransmeulenbroeks@gmail.com> Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
2012-01-05hwmon: (ltc4261) set data->valid to 0 if errorFrans Meulenbroeks
If there is an error it is better to set data->valid to 0 so the next call to ltc4261_update_device will always be executed. Signed-off-by: Frans Meulenbroeks <fransmeulenbroeks@gmail.com> Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
2012-01-05hwmon: (f75375s) Add support for F75387SG/RGBjörn Gerhart
Fintek F75387SG/RG is mostly compatible to F75373/F75375. Add support for it to the F75375S driver. Fan support for F75387SG/RG has been implemented but not tested. Cc: Riku Voipio <riku.voipio@iki.fi> Signed-off-by: Bjoern Gerhart <oss@extracloud.de> Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
2012-01-05hwmon: (f75375s) Disable setting DC fan control mode for F75373Guenter Roeck
F75373 does not support DC (linear voltage) fan control mode, so don't let the user set it. Cc: Riku Voipio <riku.voipio@iki.fi> Reviewed-by: Bjoern Gerhart <oss@extracloud.de> Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
2012-01-05hwmon: (f75375s) Initialize pwmX_mode and pwmX_enable if there is no ↵Guenter Roeck
platform data pwmX_mode and pwmX_enable are not initialized if no platform data is provided to the driver. Read chip configuration at driver initialization time and initialize attributes to reflect chip configuration. Cc: Riku Voipio <riku.voipio@iki.fi> Reviewed-by: Bjoern Gerhart <oss@extracloud.de> Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
2012-01-05hwmon: (f75375s) Fix value range for PWM modesGuenter Roeck
Accepted value range for PWM modes was 0..4, even though only 0..3 is subsequently used. Limit permitted value range to 0..3 to avoid unpredictable behavior. Cc: Riku Voipio <riku.voipio@iki.fi> Reviewed-by: Bjoern Gerhart <oss@extracloud.de> Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
2012-01-05hwmon: (f75375s) Use standard sysfs attribute namesGuenter Roeck
The driver uses non-standard sysfs attribute names for maximum and target fan speeds, even though standard attibute names for the same values do exist. Replace non-standard attribute names with standard attribute names. Cc: Riku Voipio <riku.voipio@iki.fi> Reviewed-by: Bjoern Gerhart <oss@extracloud.de> Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
2012-01-05hwmon: (f75375s) Fix checkpatch errors and warningsGuenter Roeck
Clean up driver to follow current coding style. Cc: Riku Voipio <riku.voipio@iki.fi> Reviewed-by: Bjoern Gerhart <oss@extracloud.de> Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
2012-01-05hwmon: (pmbus/zl6100) Only instantiate external temperature sensor if enabledGuenter Roeck
BMR4xx devices don't have an external temperature sensor, and instantiating it does not provide value anyway if it is disabled. Only instantiate it if it is enabled. Also optimize wait time between I2C chip accesses in the probe function, and replace unnecessary check for support for I2C_FUNC_SMBUS_READ_BYTE_DATA with now required support for I2C_FUNC_SMBUS_READ_WORD_DATA. Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com> Reviewed-by: Robert Coulson <robert.coulson@ericsson.com>
2012-01-05hwmon: (pmbus/zl6100) Add support for Ericsson BMR45[0,1] and BMR46[2,3,4]Guenter Roeck
Add support for Ericsson BMR450, BMR451, BMR462, BMR463, and BMR464, which are based on ZL2005 and ZL2008, to zl6100 driver. Remove BMR450 and BMR451 device IDs from generic PMBus driver. Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com> Reviewed-by: Robert Coulson <robert.coulson@ericsson.com>
2012-01-05hwmon: (pmbus/zl6100) Add support for ZL2005Guenter Roeck
Add explicit support for ZL2005. Functionality is almost the same as with other Zilker Labs / Intersil chips, but limit register detection does not work reliably. Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com> Reviewed-by: Robert Coulson <robert.coulson@ericsson.com>
2012-01-05hwmon: (pmbus/adm1275) Validate device IDGuenter Roeck
Since manufacturer and device ID are known, read and validate it. Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com> [Dan Carpenter <dan.carpenter@oracle.com>: Fixed memory leak] Reviewed-by: Robert Coulson <robert.coulson@ericsson.com>
2012-01-03switch sysfs_chmod_file() to umode_tAl Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-01-03switch ->is_visible() to returning umode_tAl Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2011-12-21x86: Simplify code by removing a !SMP #ifdefs from 'struct cpuinfo_x86'Kevin Winchester
Several fields in struct cpuinfo_x86 were not defined for the !SMP case, likely to save space. However, those fields still have some meaning for UP, and keeping them allows some #ifdef removal from other files. The additional size of the UP kernel from this change is not significant enough to worry about keeping up the distinction: text data bss dec hex filename 4737168 506459 972040 6215667 5ed7f3 vmlinux.o.before 4737444 506459 972040 6215943 5ed907 vmlinux.o.after for a difference of 276 bytes for an example UP config. If someone wants those 276 bytes back badly then it should be implemented in a cleaner way. Signed-off-by: Kevin Winchester <kjwinchester@gmail.com> Cc: Steffen Persvold <sp@numascale.com> Link: http://lkml.kernel.org/r/1324428742-12498-1-git-send-email-kjwinchester@gmail.com Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-12-12hwmon: (jz4740) Staticise jz4740_hwmon_driverAxel Lin
It is not used outside this driver so no need to make the symbol global. Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
2011-12-12hwmon: (jz4740) fix signedness bugAxel Lin
wait_for_completion_interruptible_timeout() may return negative value. In this case, checking if (t > 0) will return true if t is unsigned. Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Lars-Peter Clausen <lars@metafoo.de> Cc: stable@kernel.org (3.0+) Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
2011-11-26hwmon: convert drivers/hwmon/* to use module_platform_driver()Axel Lin
This patch converts the drivers in drivers/hwmon/* to use the module_platform_driver() macro which makes the code smaller and a bit simpler. Cc: Donggeun Kim <dg77.kim@samsung.com> Cc: Simon Guinot <sguinot@lacie.com> Cc: Lars-Peter Clausen <lars@metafoo.de> Cc: MyungJoo Ham <myungjoo.ham@samsung.com> Cc: Ben Dooks <ben@simtec.co.uk> Cc: Hans de Goede <hdegoede@redhat.com> Cc: J Keerthy <j-keerthy@ti.com> Cc: David S. Miller <davem@davemloft.net> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
2011-11-25hwmon: Remove redundant spi driver bus initializationLars-Peter Clausen
In ancient times it was necessary to manually initialize the bus field of an spi_driver to spi_bus_type. These days this is done in spi_register_driver(), so we can drop the manual assignment. The patch was generated using the following coccinelle semantic patch: // <smpl> @@ identifier _driver; @@ struct spi_driver _driver = { .driver = { - .bus = &spi_bus_type, }, }; // </smpl> Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Cc: Jean Delvare <khali@linux-fr.org> Cc: Guenter Roeck <guenter.roeck@ericsson.com> Cc: lm-sensors@lm-sensors.org Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
2011-11-17hwmon: (exynos4_tmu) Fix Kconfig dependencyDonggeun Kim
Rename dependency of EXYNOS4_TMU in Kconfig to the existing one. Signed-off-by: Donggeun Kim <dg77.kim@samsung.com> Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
2011-11-06Merge branch 'modsplit-Oct31_2011' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/paulg/linux * 'modsplit-Oct31_2011' of git://git.kernel.org/pub/scm/linux/kernel/git/paulg/linux: (230 commits) Revert "tracing: Include module.h in define_trace.h" irq: don't put module.h into irq.h for tracking irqgen modules. bluetooth: macroize two small inlines to avoid module.h ip_vs.h: fix implicit use of module_get/module_put from module.h nf_conntrack.h: fix up fallout from implicit moduleparam.h presence include: replace linux/module.h with "struct module" wherever possible include: convert various register fcns to macros to avoid include chaining crypto.h: remove unused crypto_tfm_alg_modname() inline uwb.h: fix implicit use of asm/page.h for PAGE_SIZE pm_runtime.h: explicitly requires notifier.h linux/dmaengine.h: fix implicit use of bitmap.h and asm/page.h miscdevice.h: fix up implicit use of lists and types stop_machine.h: fix implicit use of smp.h for smp_processor_id of: fix implicit use of errno.h in include/linux/of.h of_platform.h: delete needless include <linux/module.h> acpi: remove module.h include from platform/aclinux.h miscdevice.h: delete unnecessary inclusion of module.h device_cgroup.h: delete needless include <linux/module.h> net: sch_generic remove redundant use of <linux/module.h> net: inet_timewait_sock doesnt need <linux/module.h> ... Fix up trivial conflicts (other header files, and removal of the ab3550 mfd driver) in - drivers/media/dvb/frontends/dibx000_common.c - drivers/media/video/{mt9m111.c,ov6650.c} - drivers/mfd/ab3550-core.c - include/linux/dmaengine.h
2011-11-06hwmon: (w83627ehf) Fix broken driver initGuenter Roeck
Commit 2265cef2 (hwmon: (w83627ehf) Properly report PECI and AMD-SI sensor types) results in kernel panic if data->temp_label was not initialized. The problem was found with chip W83627DHG-P. Add check if data->temp->label was set before use. Based on incomplete patch by Alexander Beregalov. Reported-by: Alexander Beregalov <a.beregalov@gmail.com> Tested-by: Alexander Beregalov <a.beregalov@gmail.com> Cc: stable@kernel.org Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2011-11-06hwmon: (coretemp) Fix for non-SMP buildsJean Delvare
The definition of TO_ATTR_NO in the non-SMP case is wrong. As the SMP definition resolves to the correct value, just use this for both cases. Without this fix the temperature attributes are named temp0_* instead of temp2_*, so libsensors won't pick them. Broken since kernel 3.0. Signed-off-by: Jean Delvare <khali@linux-fr.org> Tested-by: Phil Sutter <phil@nwl.cc> Cc: stable@kernel.org Acked-by: Durgadoss R <Durgadoss.r@intel.com> Acked-by: Guenter Roeck <guenter.roeck@ericsson.com>
2011-11-04hwmon: (w83627ehf) Add support for the W83627UHGJean Delvare
This is essentially a stripped down version of the W83627DHG. Noticeable difference is that it is still powered with +5V, as older models, even though the ADC resolution is 8 mV as newer models have. Thanks to Ulf Bruman (Saab Group) for doing all the testing. Signed-off-by: Jean Delvare <khali@linux-fr.org> Acked-by: Guenter Roeck <guenter.roeck@ericsson.com>
2011-11-04hwmon: (w83627ehf) Clean up probe functionJean Delvare
The probe function has grown pretty large, I think it's time for some cleanups, starting with these two simple ones: * Move temp3/in6 check for the W83667HG later in the function, where it is done for all other chip types. * Move temperature register setting to a separate function, to avoid code duplication. Signed-off-by: Jean Delvare <khali@linux-fr.org> Acked-by: Guenter Roeck <guenter.roeck@ericsson.com>
2011-11-04hwmon: (w83627ehf) Properly report PECI and AMD-SI sensor typesJean Delvare
When temperature sources are PECI or AMD-SI agents, it makes no sense to report their type as diode or thermistor. Instead we must report their digital nature. Signed-off-by: Jean Delvare <khali@linux-fr.org> Cc: stable@kernel.org Acked-by: Guenter Roeck <guenter.roeck@ericsson.com>
2011-11-04hwmon: Use i2c_smbus_{read,write}_word_swappedJean Delvare
Make use of the new i2c_smbus_{read,write}_word_swapped functions. This makes the driver code more compact and readable. It also ensures proper error handling. Signed-off-by: Jean Delvare <khali@linux-fr.org> Acked-by: Jonathan Cameron <jic23@cam.ac.uk> Acked-by: Guenter Roeck <guenter.roeck@ericsson.com> Cc: Dirk Eibach <eibach@gdsys.de> Cc: "Mark M. Hoffman" <mhoffman@lightlink.com> Cc: Guillaume Ligneul <guillaume.ligneul@gmail.com>
2011-11-04hwmon: (smsc47b397) Fix checkpatch errorsJean Delvare
Signed-off-by: Jean Delvare <khali@linux-fr.org> Acked-by: Guenter Roeck <guenter.roeck@ericsson.com>
2011-11-04hwmon: (lm90) Make code more readableJean Delvare
Clean up the code to make it more readable: * Remove reg_ and new_ prefixes from variable names, they made the names longer, causing extra line breaks, while not adding much value. * Introduce struct device dev* = &client->dev in two functions, to avoid repeating client->dev everywhere in these functions. Signed-off-by: Jean Delvare <khali@linux-fr.org> Acked-by: Guenter Roeck <guenter.roeck@ericsson.com>
2011-11-04hwmon: (lm90) Fix warningsJean Delvare
With some configuration option combinations, we get the following warnings: drivers/hwmon/lm90.c: In function 'lm90_detect': drivers/hwmon/lm90.c:1114: warning: 'chip_id' may be used uninitialized in this function drivers/hwmon/lm90.c:1114: warning: 'reg_config1' may be used uninitialized in this function drivers/hwmon/lm90.c:1114: warning: 'reg_convrate' may be used uninitialized in this function drivers/hwmon/lm90.c:1187: warning: 'reg_emerg2' may be used uninitialized in this function drivers/hwmon/lm90.c:1187: warning: 'reg_status2' may be used uninitialized in this function We can solve these easily by reading the register values first and checking for errors later. These errors should be very rare, even in the case of failed detection, so this change has no impact on performance. And this makes checkpatch.pl happier. Reported-by: Guenter Roeck <guenter.roeck@ericsson.com> Signed-off-by: Jean Delvare <khali@linux-fr.org> Acked-by: Guenter Roeck <guenter.roeck@ericsson.com>
2011-11-04hwmon: (ibmaem) Avoid repeated memory allocationsJean Delvare
Preallocate a buffer for the response to sensor reads, and reuse it for each read instead of allocating a new one each time. This should be faster and should also avoid memory fragmentation. Signed-off-by: Jean Delvare <khali@linux-fr.org> Acked-by: Darrick J. Wong <djwong@us.ibm.com> Acked-by: Guenter Roeck <guenter.roeck@ericsson.com>
2011-11-04hwmon: (ibmaem) Make instance initializations independentJean Delvare
There is no good reason that I can see why the failure to initialize one instance should prevent other instances from being initialized. Signed-off-by: Jean Delvare <khali@linux-fr.org> Acked-by: Darrick J. Wong <djwong@us.ibm.com> Acked-by: Guenter Roeck <guenter.roeck@ericsson.com>
2011-11-04hwmon: (ibmaem) Fix error pathsJean Delvare
I am under the impression that error paths in functions aem_init_aem1_inst() and aem_init_aem2_inst() are incorrect. In several cases, the function returns 0 on error, which I suspect is not intended. Fix this by properly tracking error codes. Signed-off-by: Jean Delvare <khali@linux-fr.org> Acked-by: Darrick J. Wong <djwong@us.ibm.com> Acked-by: Guenter Roeck <guenter.roeck@ericsson.com>
2011-11-04hwmon: (lm73) Make detection less problematicJean Delvare
Word reads can cause trouble with some I2C devices, so do as much detection as we can using only byte reads, and only use a word read in the end to confirm the positive match. Also properly handle read errors. Signed-off-by: Jean Delvare <khali@linux-fr.org> Acked-by: Guenter Roeck <guenter.roeck@ericsson.com> Cc: Robert Casanova <robertcasanova@nanometrics.ca>
2011-11-04hwmon: Avoid building drivers for powerpc that read/write ISA addressesDean Nelson
A modprobe of hwmon drivers that read/write ISA addresses on a powerpc results in a kernel Oops. These reads/writes are being done via the inb()/in_8() and outb()/out_8() macros. Prevent these drivers from being built for powerpc. Signed-off-by: Dean Nelson <dnelson@redhat.com> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2011-11-03Merge branch 'for-next' of git://git.infradead.org/users/sameo/mfd-2.6Linus Torvalds
* 'for-next' of git://git.infradead.org/users/sameo/mfd-2.6: (80 commits) mfd: Fix missing abx500 header file updates mfd: Add missing <linux/io.h> include to intel_msic x86, mrst: add platform support for MSIC MFD driver mfd: Expose TurnOnStatus in ab8500 sysfs mfd: Remove support for early drop ab8500 chip mfd: Add support for ab8500 v3.3 mfd: Add ab8500 interrupt disable hook mfd: Convert db8500-prcmu panic() into pr_crit() mfd: Refactor db8500-prcmu request_clock() function mfd: Rename db8500-prcmu init function mfd: Fix db5500-prcmu defines mfd: db8500-prcmu voltage domain consumers additions mfd: db8500-prcmu reset code retrieval mfd: db8500-prcmu tweak for modem wakeup mfd: Add db8500-pcmu watchdog accessor functions for watchdog mfd: hwacc power state db8500-prcmu accessor mfd: Add db8500-prcmu accessors for PLL and SGA clock mfd: Move to the new db500 PRCMU API mfd: Create a common interface for dbx500 PRCMU drivers mfd: Initialize DB8500 PRCMU regs ... Fix up trivial conflicts in arch/arm/mach-imx/mach-mx31moboard.c arch/arm/mach-omap2/board-omap3beagle.c arch/arm/mach-u300/include/mach/irqs.h drivers/mfd/wm831x-spi.c
2011-10-31drivers/hwmon/hwmon.c: convert idr to ida and use ida_simple_get()Jonathan Cameron
A straightforward looking use of idr for a device id. Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Tejun Heo <tj@kernel.org> Cc: Guenter Roeck <guenter.roeck@ericsson.com> Cc: James Bottomley <James.Bottomley@HansenPartnership.com> Acked-by: Darrick J. Wong <djwong@us.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-10-31hwmon: convert idr to ida and use ida_simple interfaceJonathan Cameron
hwmon was using an idr with a NULL pointer, so convert to an ida which then allows use of Rusty's ida_simple_get. Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Tejun Heo <tj@kernel.org> Acked-by: Guenter Roeck <guenter.roeck@ericsson.com> Cc: James Bottomley <James.Bottomley@HansenPartnership.com> Cc: David Airlie <airlied@linux.ie> Cc: Thomas Hellstrom <thellstrom@vmware.com> Cc: Evgeniy Polyakov <zbr@ioremap.net> Cc: Darrick J. Wong <djwong@us.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-10-31drivers/hwmon: add module.h to ultra45_env.cPaul Gortmaker
This file needs the full module.h header and up to now was just implicitly capitalizing on it being present already. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-10-28Merge branch 'x86-microcode-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip * 'x86-microcode-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86, microcode, AMD: Add microcode revision to /proc/cpuinfo x86, microcode: Correct microcode revision format coretemp: Get microcode revision from cpu_data x86, intel: Use c->microcode for Atom errata check x86, intel: Output microcode revision in /proc/cpuinfo x86, microcode: Don't request microcode from userspace unnecessarily Fix up trivial conflicts in arch/x86/kernel/cpu/amd.c (conflict between moving AMD BSP code to cpu_dev helper function and adding AMD microcode revision to /proc/cpuinfo code)
2011-10-24hwmon: (w83627ehf) Better fix for negative temperature valuesJean Delvare
It is more efficient to left-align 8-bit temperature values, so that 8-bit and 9-bit temperature values can be handled exactly the same way in the rest of the code. Signed-off-by: Jean Delvare <khali@linux-fr.org> Cc: Guenter Roeck <guenter.roeck@ericsson.com> Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
2011-10-24hwmon: (w83627ehf) Uninline is_word_sizedJean Delvare
Helper function is_word_sized has grown too much to be kept inline. It was OK when there were only 6 word-sized registers but support for new devices have made the list much longer. The function is also called from more places than before. Signed-off-by: Jean Delvare <khali@linux-fr.org> Cc: Guenter Roeck <guenter.roeck@ericsson.com> Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-05-31 06:48:18 +0000