aboutsummaryrefslogtreecommitdiff
path: root/drivers/infiniband
AgeCommit message (Collapse)Author
2014-06-18iser-target: Add missing target_put_sess_cmd for ImmedateData failureNicholas Bellinger
commit 6cc44a6fb46e1ecc1c28125aa8fa34d317aa9ea7 upstream. This patch addresses a bug where an early exception for SCSI WRITE with ImmediateData=Yes was missing the target_put_sess_cmd() call to drop the extra se_cmd->cmd_kref reference obtained during the normal iscsit_setup_scsi_cmd() codepath execution. This bug was manifesting itself during session shutdown within isert_cq_rx_comp_err() where target_wait_for_sess_cmds() would end up waiting indefinately for the last se_cmd->cmd_kref put to occur for the failed SCSI WRITE + ImmediateData descriptors. This fix follows what traditional iscsi-target code already does for the same failure case within iscsit_get_immediate_data(). Reported-by: Sagi Grimberg <sagig@dev.mellanox.co.il> Cc: Sagi Grimberg <sagig@dev.mellanox.co.il> Cc: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-06-18Target/iser: Fix iscsit_accept_np and rdma_cm racy flowSagi Grimberg
commit 531b7bf4bd795d9a09eac92504322a472c010bc8 upstream. RDMA CM and iSCSI target flows are asynchronous and completely uncorrelated. Relying on the fact that iscsi_accept_np will be called after CM connection request event and will wait for it is a mistake. When attempting to login to a few targets this flow is racy and unpredictable, but for parallel login to dozens of targets will race and hang every time. The correct synchronizing mechanism in this case is pending on a semaphore rather than a wait_for_event. We keep the pending interruptible for iscsi_np cleanup stage. (Squash patch to remove dead code into parent - nab) Reported-by: Slava Shwartsman <valyushash@gmail.com> Signed-off-by: Sagi Grimberg <sagig@mellanox.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-06-18Target/iser: Fix wrong connection requests list additionSagi Grimberg
commit 9fe63c88b1d59f1ce054d6948ccd3096496ecedb upstream. Should be adding list_add_tail($new, $head) and not the other way around. Signed-off-by: Sagi Grimberg <sagig@mellanox.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-06-18iser-target: Add missing se_cmd put for WRITE_PENDING in tx_comp_errNicholas Bellinger
commit 03e7848a64ed535a30f5d7fc6dede2d5a6a2534b upstream. This patch fixes a bug where outstanding RDMA_READs with WRITE_PENDING status require an extra target_put_sess_cmd() in isert_put_cmd() code when called from isert_cq_tx_comp_err() + isert_cq_drain_comp_llist() context during session shutdown. The extra kref PUT is required so that transport_generic_free_cmd() invokes the last target_put_sess_cmd() -> target_release_cmd_kref(), which will complete(&se_cmd->cmd_wait_comp) the outstanding se_cmd descriptor with WRITE_PENDING status, and awake the completion in target_wait_for_sess_cmds() to invoke TFO->release_cmd(). The bug was manifesting itself in target_wait_for_sess_cmds() where a se_cmd descriptor with WRITE_PENDING status would end up sleeping indefinately. Acked-by: Sagi Grimberg <sagig@mellanox.com> Cc: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-06-18iser-target: Match FRMR descriptors to available session tagsNicholas Bellinger
commit f46d6a8a01d6bbd83a97140f30a72a89b038807b upstream. This patch changes isert_conn_create_fastreg_pool() to follow logic in iscsi_target_locate_portal() for determining how many FRMR descriptors to allocate based upon the number of possible per-session command slots that are available. This addresses an OOPs in isert_reg_rdma() where due to the use of ISCSI_DEF_XMIT_CMDS_MAX could end up returning a bogus fast_reg_descriptor when the number of active tags exceeded the original hardcoded max. Note this also includes moving isert_conn_create_fastreg_pool() from isert_connect_request() to isert_put_login_tx() before posting the final Login Response PDU in order to determine the se_nacl->queue_depth (eg: number of tags) per session the target will be enforcing. v2 changes: - Move isert_conn->conn_fr_pool list_head init into isert_conn_request() v3 changes: - Drop unnecessary list_empty() check in isert_reg_rdma() (Sagi) Cc: Sagi Grimberg <sagig@mellanox.com> Cc: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-06-18ib_srpt: Use correct ib_sg_dma primitivesMike Marciniszyn
commit b076808051f2c80d38e03fb2f1294f525c7a446d upstream. The code was incorrectly using sg_dma_address() and sg_dma_len() instead of ib_sg_dma_address() and ib_sg_dma_len(). This prevents srpt from functioning with the Intel HCA and indeed will corrupt memory badly. Cc: Bart Van Assche <bvanassche@acm.org> Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Tested-by: Vinod Kumar <vinod.kumar@intel.com> Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-06-18IB/core: Don't resolve passive side RoCE L2 address in CMA REQ handlerMoni Shoua
commit b2853fd6c2d0f383dbdf7427e263eb576a633867 upstream. The code that resolves the passive side source MAC within the rdma_cm connection request handler was both redundant and buggy, so remove it. It was redundant since later, when an RC QP is modified to RTR state, the resolution will take place in the ib_core module. It was buggy because this callback also deals with UD SIDR exchange, for which we incorrectly looked at the REQ member of the CM event and dereferenced a random value. Fixes: dd5f03beb4f7 ("IB/core: Ethernet L2 attributes in verbs/cm structures") Signed-off-by: Moni Shoua <monis@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-06-18IB/qib: add missing braces in do_qib_user_sdma_queue_create()Yann Droneaud
commit 37a967651caf99dd267017023737bd442f5acb3d upstream. Commit c804f07248895ff9c moved qib_assign_ctxt() to do_qib_user_sdma_queue_create() but dropped the braces around the statements. This was spotted by coccicheck (coccinelle/spatch): $ make C=2 CHECK=scripts/coccicheck drivers/infiniband/hw/qib/ CHECK drivers/infiniband/hw/qib/qib_file_ops.c drivers/infiniband/hw/qib/qib_file_ops.c:1583:2-23: code aligned with following code on line 1587 This patch adds braces back. Link: http://marc.info/?i=cover.1394485254.git.ydroneaud@opteya.com Cc: Mike Marciniszyn <mike.marciniszyn@intel.com> Cc: infinipath@intel.com Cc: Julia Lawall <julia.lawall@lip6.fr> Cc: cocci@systeme.lip6.fr Signed-off-by: Yann Droneaud <ydroneaud@opteya.com> Tested-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Acked-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Roland Dreier <roland@purestorage.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-06-18IB/qib: Fix debugfs ordering issue with multiple HCAsMike Marciniszyn
commit f8b6c47a44c063062317646683a73371c24c69ee upstream. The debugfs init code was incorrectly called before the idr mechanism is used to get the unit number, so the dd->unit hasn't been initialized. This caused the unit relative directory creation to fail after the first. This patch moves the init for the debugfs stuff until after all of the failures and after the unit number has been determined. A bug in unwind code in qib_alloc_devdata() is also fixed. Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Roland Dreier <roland@purestorage.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-06-18IB/ehca: Returns an error on ib_copy_to_udata() failureYann Droneaud
commit 5bdb0f02add5994b0bc17494f4726925ca5d6ba1 upstream. In case of error when writing to userspace, function ehca_create_cq() does not set an error code before following its error path. This patch sets the error code to -EFAULT when ib_copy_to_udata() fails. This was caught when using spatch (aka. coccinelle) to rewrite call to ib_copy_{from,to}_udata(). Link: https://www.gitorious.org/opteya/coccib/source/75ebf2c1033c64c1d81df13e4ae44ee99c989eba:ib_copy_udata.cocci Link: http://marc.info/?i=cover.1394485254.git.ydroneaud@opteya.com Signed-off-by: Yann Droneaud <ydroneaud@opteya.com> Signed-off-by: Roland Dreier <roland@purestorage.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-06-18IB/mthca: Return an error on ib_copy_to_udata() failureYann Droneaud
commit 08e74c4b00c30c232d535ff368554959403d0432 upstream. In case of error when writing to userspace, the function mthca_create_cq() does not set an error code before following its error path. This patch sets the error code to -EFAULT when ib_copy_to_udata() fails. This was caught when using spatch (aka. coccinelle) to rewrite call to ib_copy_{from,to}_udata(). Link: https://www.gitorious.org/opteya/coccib/source/75ebf2c1033c64c1d81df13e4ae44ee99c989eba:ib_copy_udata.cocci Link: http://marc.info/?i=cover.1394485254.git.ydroneaud@opteya.com Signed-off-by: Yann Droneaud <ydroneaud@opteya.com> Signed-off-by: Roland Dreier <roland@purestorage.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-06-18IB/nes: Return an error on ib_copy_from_udata() failure instead of NULLYann Droneaud
commit 9d194d1025f463392feafa26ff8c2d8247f71be1 upstream. In case of error while accessing to userspace memory, function nes_create_qp() returns NULL instead of an error code wrapped through ERR_PTR(). But NULL is not expected by ib_uverbs_create_qp(), as it check for error with IS_ERR(). As page 0 is likely not mapped, it is going to trigger an Oops when the kernel will try to dereference NULL pointer to access to struct ib_qp's fields. In some rare cases, page 0 could be mapped by userspace, which could turn this bug to a vulnerability that could be exploited: the function pointers in struct ib_device will be under userspace total control. This was caught when using spatch (aka. coccinelle) to rewrite calls to ib_copy_{from,to}_udata(). Link: https://www.gitorious.org/opteya/ib-hw-nes-create-qp-null Link: https://www.gitorious.org/opteya/coccib/source/75ebf2c1033c64c1d81df13e4ae44ee99c989eba:ib_copy_udata.cocci Link: http://marc.info/?i=cover.1394485254.git.ydroneaud@opteya.com Signed-off-by: Yann Droneaud <ydroneaud@opteya.com> Signed-off-by: Roland Dreier <roland@purestorage.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-06-18IB/ipath: Fix potential buffer overrun in sending diag packet routineDennis Dalessandro
commit a2cb0eb8a64adb29a99fd864013de957028f36ae upstream. Guard against a potential buffer overrun. The size to read from the user is passed in, and due to the padding that needs to be taken into account, as well as the place holder for the ICRC it is possible to overflow the 32bit value which would cause more data to be copied from user space than is allocated in the buffer. Reported-by: Nico Golde <nico@ngolde.de> Reported-by: Fabian Yamaguchi <fabs@goesec.de> Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Roland Dreier <roland@purestorage.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-03-09Merge git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pendingLinus Torvalds
Pull SCSI target fixes from Nicholas Bellinger: "This series addresses a number of outstanding issues wrt to active I/O shutdown using iser-target. This includes: - Fix a long standing tpg_state bug where a tpg could be referenced during explicit shutdown (v3.1+ stable) - Use list_del_init for iscsi_cmd->i_conn_node so list_empty checks work as expected (v3.10+ stable) - Fix a isert_conn->state related hung task bug + ensure outstanding I/O completes during session shutdown. (v3.10+ stable) - Fix isert_conn->post_send_buf_count accounting for RDMA READ/WRITEs (v3.10+ stable) - Ignore FRWR completions during active I/O shutdown (v3.12+ stable) - Fix command leakage for interrupt coalescing during active I/O shutdown (v3.13+ stable) Also included is another DIF emulation fix from Sagi specific to v3.14-rc code" * git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending: Target/sbc: Fix sbc_copy_prot for offset scatters iser-target: Fix command leak for tx_desc->comp_llnode_batch iser-target: Ignore completions for FRWRs in isert_cq_tx_work iser-target: Fix post_send_buf_count for RDMA READ/WRITE iscsi/iser-target: Fix isert_conn->state hung shutdown issues iscsi/iser-target: Use list_del_init for ->i_conn_node iscsi-target: Fix iscsit_get_tpg_from_np tpg_state bug
2014-03-04iser-target: Fix command leak for tx_desc->comp_llnode_batchNicholas Bellinger
This patch addresses a number of active I/O shutdown issues related to isert_cmd descriptors being leaked that are part of a completion interrupt coalescing batch. This includes adding logic in isert_cq_tx_comp_err() to drain any associated tx_desc->comp_llnode_batch, as well as isert_cq_drain_comp_llist() to drain any associated isert_conn->conn_comp_llist. Also, set tx_desc->llnode_active in isert_init_send_wr() in order to determine when work requests need to be skipped in isert_cq_tx_work() exception path code. Finally, update isert_init_send_wr() to only allow interrupt coalescing when ISER_CONN_UP. Acked-by: Sagi Grimberg <sagig@mellanox.com> Cc: Or Gerlitz <ogerlitz@mellanox.com> Cc: <stable@vger.kernel.org> #3.13+ Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2014-03-04iser-target: Ignore completions for FRWRs in isert_cq_tx_workNicholas Bellinger
This patch changes IB_WR_FAST_REG_MR + IB_WR_LOCAL_INV related work requests to include a ISER_FRWR_LI_WRID value in order to signal isert_cq_tx_work() that these requests should be ignored. This is necessary because even though IB_SEND_SIGNALED is not set for either work request, during a QP failure event the work requests will be returned with exception status from the TX completion queue. v2 changes: - Rename ISER_FRWR_LI_WRID -> ISER_FASTREG_LI_WRID (Sagi) Acked-by: Sagi Grimberg <sagig@mellanox.com> Cc: Or Gerlitz <ogerlitz@mellanox.com> Cc: <stable@vger.kernel.org> #3.12+ Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2014-03-04iser-target: Fix post_send_buf_count for RDMA READ/WRITENicholas Bellinger
This patch fixes the incorrect setting of ->post_send_buf_count related to RDMA WRITEs + READs where isert_rdma_rw->send_wr_num was not being taken into account. This includes incrementing ->post_send_buf_count within isert_put_datain() + isert_get_dataout(), decrementing within __isert_send_completion() + isert_response_completion(), and clearing wr->send_wr_num within isert_completion_rdma_read() This is necessary because even though IB_SEND_SIGNALED is not set for RDMA WRITEs + READs, during a QP failure event the work requests will be returned with exception status from the TX completion queue. Acked-by: Sagi Grimberg <sagig@mellanox.com> Cc: Or Gerlitz <ogerlitz@mellanox.com> Cc: <stable@vger.kernel.org> #3.10+ Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2014-03-04iscsi/iser-target: Fix isert_conn->state hung shutdown issuesNicholas Bellinger
This patch addresses a couple of different hug shutdown issues related to wait_event() + isert_conn->state. First, it changes isert_conn->conn_wait + isert_conn->conn_wait_comp_err from waitqueues to completions, and sets ISER_CONN_TERMINATING from within isert_disconnect_work(). Second, it splits isert_free_conn() into isert_wait_conn() that is called earlier in iscsit_close_connection() to ensure that all outstanding commands have completed before continuing. Finally, it breaks isert_cq_comp_err() into seperate TX / RX related code, and adds logic in isert_cq_rx_comp_err() to wait for outstanding commands to complete before setting ISER_CONN_DOWN and calling complete(&isert_conn->conn_wait_comp_err). Acked-by: Sagi Grimberg <sagig@mellanox.com> Cc: Or Gerlitz <ogerlitz@mellanox.com> Cc: <stable@vger.kernel.org> #3.10+ Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2014-03-04iscsi/iser-target: Use list_del_init for ->i_conn_nodeNicholas Bellinger
There are a handful of uses of list_empty() for cmd->i_conn_node within iser-target code that expect to return false once a cmd has been removed from the per connect list. This patch changes all uses of list_del -> list_del_init in order to ensure that list_empty() returns false as expected. Acked-by: Sagi Grimberg <sagig@mellanox.com> Cc: Or Gerlitz <ogerlitz@mellanox.com> Cc: <stable@vger.kernel.org> #3.10+ Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2014-02-25net,IB/mlx: Bump all Mellanox driver versionsAmir Vadai
Bump all Mellanox driver versions. Signed-off-by: Amir Vadai <amirv@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-15Merge git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pendingLinus Torvalds
Pull SCSI target fixes from Nicholas Bellinger: "Mostly minor fixes this time to v3.14-rc1 related changes. Also included is one fix for a free after use regression in persistent reservations UNREGISTER logic that is CC'ed to >= v3.11.y stable" * git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending: Target/sbc: Fix protection copy routine IB/srpt: replace strict_strtoul() with kstrtoul() target: Simplify command completion by removing CMD_T_FAILED flag iser-target: Fix leak on failure in isert_conn_create_fastreg_pool iscsi-target: Fix SNACK Type 1 + BegRun=0 handling target: Fix missing length check in spc_emulate_evpd_83() qla2xxx: Remove last vestiges of qla_tgt_cmd.cmd_list target: Fix 32-bit + CONFIG_LBDAF=n link error w/ sector_div target: Fix free-after-use regression in PR unregister
2014-02-14Merge branches 'cma', 'cxgb4', 'iser', 'misc', 'mlx4', 'mlx5', 'nes', ↵Roland Dreier
'ocrdma', 'qib' and 'usnic' into for-next
2014-02-14RDMA/ocrdma: Fix load time panic during GID table initDevesh Sharma
We should use rdma_vlan_dev_real_dev() instead of using vlan_dev_real_dev() when building the GID table for a vlan interface. Signed-off-by: Devesh Sharma <devesh.sharma@emulex.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-02-14RDMA/ocrdma: Fix traffic class shiftDevesh Sharma
Use correct value for obtaining traffic class from device response for Query QP request. Signed-off-by: Devesh Sharma <devesh.sharma@emulex.com> Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-02-14IB/iser: Fix use after free in iser_snd_completion()Dan Carpenter
We use "tx_desc" again after we free it. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-02-14IB/iser: Avoid dereferencing iscsi_iser conn object when not bound to iser ↵Roi Dayan
connection Fix a possible NULL pointer dereference in disconnection flow. This can happen if the target disconnected/rejected the connection request, e.g before the binding stage between iscsi connection to the transport connection. Signed-off-by: Alex Tabachnik <alext@mellanox.com> Signed-off-by: Roi Dayan <roid@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-02-14IB/usnic: Fix smatch endianness errorUpinder Malhi
Error reported at http://marc.info/?l=linux-rdma&m=138995755801039&w=2 Fix short to int cast for big endian systems. Signed-off-by: Upinder Malhi <umalhi@cisco.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-02-13IB/mlx5: Remove dependency on X86Eli Cohen
Remove Kconfig dependency of mlx5_ib/mlx5_core on X86, since there is no such dependency in reality. Signed-off-by: Eli Cohen <eli@mellanox.com> Signed-off-by: Michael Neuling <mikey@neuling.org> Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-02-13IB/qib: Add missing serdes init sequenceMike Marciniszyn
Research has shown that commit a77fcf895046 ("IB/qib: Use a single txselect module parameter for serdes tuning") missed a key serdes init sequence. This patch add that sequence. Cc: <stable@vger.kernel.org> Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-02-13RDMA/cxgb4: Add missing neigh_release in LE-Workaround pathKumar Sanghvi
Signed-off-by: Kumar Sanghvi <kumaras@chelsio.com> Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-02-13IB: Report using RoCE IP based gids in port capsMoni Shoua
For userspace RoCE UD QPs we need to know the GID format that the kernel uses, e.g when working over older kernels. For that end, add a new port capability IB_PORT_IP_BASED_GIDS and report it when query port is issued. Signed-off-by: Moni Shoua <monis@mellanox.co.il> Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-02-13IB/mlx4: Build the port IBoE GID table properly under bondingMoni Shoua
When scanning netdevices we need to check a few more conditions and cases to build the IBoE GID table properly. For example, under bonding we must make sure that when a port is down, the bond IP address isn't programmed as a GID, since doing so will cause failure with IB core flows that selects ports by GID. Signed-off-by: Moni Shoua <monis@mellanox.co.il> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-02-13IB/mlx4: Do IBoE GID table resets per-portMoni Shoua
The IBoE code used to reset the GID table did it for all Ethernet ports of the device. Since the whole architecture of generating GIDs and responding to events is port-based, this is inefficient and can lead to wrong content in the GID table. Change the reset flow to be per-port. Signed-off-by: Moni Shoua <monis@mellanox.co.il> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-02-13IB/mlx4: Do IBoE locking earlier when initializing the GID tableMoni Shoua
Updating the GID table under IBoE requires read/write from/to shared data structures. These data structures are protected with the device iboe lock. The flows that modify the GID table start from 1. Initializing the GID table 2. NETDEV events 3. INET or INET6 events This patch makes sure that the flow of initializing the GID table is consistent with the other two flows w.r.t on what step the lock is taken. Signed-off-by: Moni Shoua <monis@mellanox.co.il> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-02-13IB/mlx4: Move rtnl locking to the right placeMoni Shoua
On the one hand, the invocation of netdev_master_upper_dev_get() within mlx4_ib_scan_netdevs() must be done with rtnl lock held. On the other hand, it's wrong to call rtnl_lock() from within this function since it's also called by our netdev notifier callback. Therefore move the locking to mlx4_ib_add() so that both cases are covered. Signed-off-by: Moni Shoua <monis@mellanox.co.il> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-02-13IB/mlx4: Make sure GID index 0 is always occupiedMoni Shoua
Make sure that for Ethernet ports, the port GID table index 0 is always occupied with a default GID of the relevant IPv6 link-local adderss. This provides better user experience for legacy applications that don't use the RDMA CM and were working on index 0 prior to the IP addressing change. Also, as GIDs are generated from IP addresses of the network devices that are associated with the port, it's basically possible that the GID table will be empty if no IP address was assigned. This doesn't comply with the IB spec section 4.1.1 "GID usage and properties". Signed-off-by: Moni Shoua <monis@mellanox.co.il> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-02-13IB/mlx4: Don't allocate range of steerable UD QPs for Ethernet-only deviceMatan Barak
When the device has only Ethernet ports, don't try to allocate range of steerable UD QPs since they aren't needed. This fixes an issue where mlx4 VFs tried to allocate a range of UD steerable QPs, but failed to do so. Fixes: c1c98501121e ("IB/mlx4: Add support for steerable IB UD QPs") Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-02-12IB/srpt: replace strict_strtoul() with kstrtoul()Jingoo Han
The usage of strict_strtoul() is not preferred, because strict_strtoul() is obsolete. Thus, kstrtoul() should be used. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2014-02-12iser-target: Fix leak on failure in isert_conn_create_fastreg_poolNicholas Bellinger
This patch fixes a memory leak for fr_desc upon failure of isert_create_fr_desc() in isert_conn_create_fastreg_pool() code. As reported by Coverity 1166659: *** CID 1166659: Resource leak (RESOURCE_LEAK) /drivers/infiniband/ulp/isert/ib_isert.c: 470 in isert_conn_create_fastreg_pool() 464 isert_conn, isert_conn->conn_fr_pool_size); 465 466 return 0; 467 468 err: 469 isert_conn_free_fastreg_pool(isert_conn); >>> CID 1166659: Resource leak (RESOURCE_LEAK) >>> Variable "fr_desc" going out of scope leaks the storage it points to. 470 return ret; 471 } 472 473 static int 474 isert_connect_request(struct rdma_cm_id *cma_id, struct rdma_cm_event *event) 475 { Cc: Sagi Grimberg <sagig@mellanox.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2014-02-12RDMA/amso1100: Fix error return codeJulia Lawall
Set the return variable to an error code as done elsewhere in the function. A simplified version of the semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> ( if@p1 (\(ret < 0\|ret != 0\)) { ... return ret; } | ret@p1 = 0 ) ... when != ret = e1 when != &ret *if(...) { ... when != ret = e2 when forall return ret; } // </smpl> Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-02-12RDMA/nes: Fix error return codeJulia Lawall
Set the return variable to an error code as done elsewhere in the function. A simplified version of the semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> ( if@p1 (\(ret < 0\|ret != 0\)) { ... return ret; } | ret@p1 = 0 ) ... when != ret = e1 when != &ret *if(...) { ... when != ret = e2 when forall return ret; } // </smpl> Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-02-06IB/mlx5: Don't set "block multicast loopback" capabilityEli Cohen
Currently Connect-IB does not support blocking multicast loopback, so don't set IB_DEVICE_BLOCK_MULTICAST_LOOPBACK in the device caps. Reported by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Eli Cohen <eli@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-02-06IB/mlx5: Fix binary compatibility with libmlx5Eli Cohen
Commit c1be5232d21d ("Fix micro UAR allocator") broke binary compatibility between libmlx5 and mlx5_ib since it defines a different value to the number of micro UARs per page, leading to wrong calculation in libmlx5. This patch defines struct mlx5_ib_alloc_ucontext_req_v2 as an extension to struct mlx5_ib_alloc_ucontext_req. The extended size is determined in mlx5_ib_alloc_ucontext() and in case of old library we use uuarn 0 which works fine -- this is acheived due to create_user_qp() falling back from high to medium then to low class where low class will return 0. For new libraries we use the more sophisticated allocation algorithm. Signed-off-by: Eli Cohen <eli@mellanox.com> Reviewed-by: Yann Droneaud <ydroneaud@opteya.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-02-06IB/mlx5: Fix RC transport send queue overhead computationEli Cohen
Fix the RC QPs send queue overhead computation to take into account two additional segments in the WQE which are needed for registration operations. Signed-off-by: Eli Cohen <eli@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-01-31Merge branch 'for-next' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending Pull SCSI target updates from Nicholas Bellinger: "The highlights this round include: - add support for SCSI Referrals (Hannes) - add support for T10 DIF into target core (nab + mkp) - add support for T10 DIF emulation in FILEIO + RAMDISK backends (Sagi + nab) - add support for T10 DIF -> bio_integrity passthrough in IBLOCK backend (nab) - prep changes to iser-target for >= v3.15 T10 DIF support (Sagi) - add support for qla2xxx N_Port ID Virtualization - NPIV (Saurav + Quinn) - allow percpu_ida_alloc() to receive task state bitmask (Kent) - fix >= v3.12 iscsi-target session reset hung task regression (nab) - fix >= v3.13 percpu_ref se_lun->lun_ref_active race (nab) - fix a long-standing network portal creation race (Andy)" * 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending: (51 commits) target: Fix percpu_ref_put race in transport_lun_remove_cmd target/iscsi: Fix network portal creation race target: Report bad sector in sense data for DIF errors iscsi-target: Convert gfp_t parameter to task state bitmask iscsi-target: Fix connection reset hang with percpu_ida_alloc percpu_ida: Make percpu_ida_alloc + callers accept task state bitmask iscsi-target: Pre-allocate more tags to avoid ack starvation qla2xxx: Configure NPIV fc_vport via tcm_qla2xxx_npiv_make_lport qla2xxx: Enhancements to enable NPIV support for QLOGIC ISPs with TCM/LIO. qla2xxx: Fix scsi_host leak on qlt_lport_register callback failure IB/isert: pass scatterlist instead of cmd to fast_reg_mr routine IB/isert: Move fastreg descriptor creation to a function IB/isert: Avoid frwr notation, user fastreg IB/isert: seperate connection protection domains and dma MRs tcm_loop: Enable DIF/DIX modes in SCSI host LLD target/rd: Add DIF protection into rd_execute_rw target/rd: Add support for protection SGL setup + release target/rd: Refactor rd_build_device_space + rd_release_device_space target/file: Add DIF protection support to fd_execute_rw target/file: Add DIF protection init/format support ...
2014-01-25Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-nextLinus Torvalds
Pull networking updates from David Miller: 1) BPF debugger and asm tool by Daniel Borkmann. 2) Speed up create/bind in AF_PACKET, also from Daniel Borkmann. 3) Correct reciprocal_divide and update users, from Hannes Frederic Sowa and Daniel Borkmann. 4) Currently we only have a "set" operation for the hw timestamp socket ioctl, add a "get" operation to match. From Ben Hutchings. 5) Add better trace events for debugging driver datapath problems, also from Ben Hutchings. 6) Implement auto corking in TCP, from Eric Dumazet. Basically, if we have a small send and a previous packet is already in the qdisc or device queue, defer until TX completion or we get more data. 7) Allow userspace to manage ipv6 temporary addresses, from Jiri Pirko. 8) Add a qdisc bypass option for AF_PACKET sockets, from Daniel Borkmann. 9) Share IP header compression code between Bluetooth and IEEE802154 layers, from Jukka Rissanen. 10) Fix ipv6 router reachability probing, from Jiri Benc. 11) Allow packets to be captured on macvtap devices, from Vlad Yasevich. 12) Support tunneling in GRO layer, from Jerry Chu. 13) Allow bonding to be configured fully using netlink, from Scott Feldman. 14) Allow AF_PACKET users to obtain the VLAN TPID, just like they can already get the TCI. From Atzm Watanabe. 15) New "Heavy Hitter" qdisc, from Terry Lam. 16) Significantly improve the IPSEC support in pktgen, from Fan Du. 17) Allow ipv4 tunnels to cache routes, just like sockets. From Tom Herbert. 18) Add Proportional Integral Enhanced packet scheduler, from Vijay Subramanian. 19) Allow openvswitch to mmap'd netlink, from Thomas Graf. 20) Key TCP metrics blobs also by source address, not just destination address. From Christoph Paasch. 21) Support 10G in generic phylib. From Andy Fleming. 22) Try to short-circuit GRO flow compares using device provided RX hash, if provided. From Tom Herbert. The wireless and netfilter folks have been busy little bees too. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (2064 commits) net/cxgb4: Fix referencing freed adapter ipv6: reallocate addrconf router for ipv6 address when lo device up fib_frontend: fix possible NULL pointer dereference rtnetlink: remove IFLA_BOND_SLAVE definition rtnetlink: remove check for fill_slave_info in rtnl_have_link_slave_info qlcnic: update version to 5.3.55 qlcnic: Enhance logic to calculate msix vectors. qlcnic: Refactor interrupt coalescing code for all adapters. qlcnic: Update poll controller code path qlcnic: Interrupt code cleanup qlcnic: Enhance Tx timeout debugging. qlcnic: Use bool for rx_mac_learn. bonding: fix u64 division rtnetlink: add missing IFLA_BOND_AD_INFO_UNSPEC sfc: Use the correct maximum TX DMA ring size for SFC9100 Add Shradha Shah as the sfc driver maintainer. net/vxlan: Share RX skb de-marking and checksum checks with ovs tulip: cleanup by using ARRAY_SIZE() ip_tunnel: clear IPCB in ip_tunnel_xmit() in case dst_link_failure() is called net/cxgb4: Don't retrieve stats during recovery ...
2014-01-25iscsi-target: Convert gfp_t parameter to task state bitmaskNicholas Bellinger
This patch propigates the use of task state bitmask now used by percpu_ida_alloc() up the iscsi-target callchain, replacing the use of GFP_ATOMIC for TASK_RUNNING, and GFP_KERNEL for TASK_INTERRUPTIBLE. Also, drop the unnecessary gfp_t parameter to isert_allocate_cmd(), and just pass TASK_INTERRUPTIBLE into iscsit_allocate_cmd(). Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2014-01-22Merge branch 'ip-roce' into for-nextRoland Dreier
Conflicts: drivers/infiniband/hw/mlx4/main.c
2014-01-22Merge branches 'cma', 'cxgb4', 'flowsteer', 'ipoib', 'misc', 'mlx4', 'mlx5', ↵Roland Dreier
'ocrdma', 'qib', 'srp' and 'usnic' into for-next
2014-01-22IB/mlx5: Verify reserved fields are clearedEli Cohen
Verify that reserved fields in struct mlx5_ib_resize_cq are cleared before continuing execution of the verb. This is required to allow making use of this area in future revisions. Signed-off-by: Yann Droneaud <ydroneaud@opteya.com> Signed-off-by: Eli Cohen <eli@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-05-01 09:06:42 +0000