aboutsummaryrefslogtreecommitdiff
path: root/drivers/input/touchscreen
AgeCommit message (Collapse)Author
2013-06-05Input: cyttsp - fix swapped mfg_stat and mfg_cmd registersMatthias Kaehlcke
The command and status register in the driver were swapped with respect to the order specified in the datasheet (CY8CTMA140). Confirmed with Cypress that the order in the datasheet is correct. Signed-off-by: Matthias Kaehlcke <matthias@kaehlcke.net> Acked-by: Javier Martinez Canillas <javier@dowhile0.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-06-05Input: cyttsp - add missing handshakeFerruh Yigit
For the devices that has blocking with timeout communication, these extra handshakes will prevent one timeout delay in startup sequence Tested-by: Ferruh Yigit <fery@cypress.com> on TMA300-DVK Signed-off-by: Ferruh Yigit <fery@cypress.com> Acked-by: Javier Martinez Canillas <javier@dowhile0.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-06-05Input: cyttsp - fix memcpy size paramFerruh Yigit
memcpy param is wrong because of offset in bl_cmd, this may corrupt the stack which may cause a crash. Tested-by: Ferruh Yigit <fery@cypress.com> on TMA300-DVK Signed-off-by: Ferruh Yigit <fery@cypress.com> Acked-by: Javier Martinez Canillas <javier@dowhile0.org> Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-05-05Input: egalax_ts - ABS_MT_POSITION_Y not reported wellHeiko Abraham
The egalax_ts touchscreen modul not report ABS_MT_POSITION_Y proper. As result it may be, that upper software levels only receive x coordinates well. Signed-off-by: Heiko Abraham <abrahamh@web.de> Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-04-15Input: st1232 - add reset pin handlingBastian Hecht
We add the possibility to hand over a GPIO number for the reset pin. This way we can remove existing board code that takes care of it and group this information properly in the platform data or in the device tree configuration. Signed-off-by: Bastian Hecht <hechtb+renesas@gmail.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-04-15Input: st1232 - convert to devm_* infrastructureLaurent Pinchart
Use the devm_* managed functions to allocate resources. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-04-07Input: ad7877 - use spi_get_drvdata() and spi_set_drvdata()Jingoo Han
Use the wrapper functions for getting and setting the driver data using spi_device instead of using dev_{get|set}_drvdata with &spi->dev, so we can directly pass a struct spi_device. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-04-07Input: ads7846 - use spi_get_drvdata() and spi_set_drvdata()Jingoo Han
Use the wrapper functions for getting and setting the driver data using spi_device instead of using dev_{get|set}_drvdata with &spi->dev, so we can directly pass a struct spi_device. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-03-31Input: eeti_ts - remove redundant null checkSachin Kamat
'pdata' is already dereferenced earlier. Hence this check is meaningless. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-03-31Input: edt-ft5x06 - remove redundant null check before kfreeSachin Kamat
kfree on a null pointer is a no-op. Hence null check is not necessary. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-03-17Input: mc13783_ts - use module_platform_driver_probe()Fabio Porcedda
This patch converts the drivers to use the module_platform_driver_probe() macro which makes the code smaller and a bit simpler. Signed-off-by: Fabio Porcedda <fabio.porcedda@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-03-17Input: atmel-wm97xx - use module_platform_driver_probe macroSachin Kamat
module_platform_driver_probe() eliminates the boilerplate and simplifies the code. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-03-17Merge tag 'v3.9-rc3' into nextDmitry Torokhov
Merge with mainline to bring in module_platform_driver_probe() and devm_ioremap_resource().
2013-03-12Input: wm9712 - fix dev_dbg newlinesMarkus Pargmann
dev_dbg should end with a new line. Signed-off-by: Markus Pargmann <mpa@pengutronix.de> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-03-12Input: wm9712 - fix wrong pen up readingsMarkus Pargmann
Often a reading can be wrong. This patch assures that this is really a pen up event and not a false reading. Based on wm9712: pen up by Teresa Gámez and Christian Hemp. Signed-off-by: Markus Pargmann <mpa@pengutronix.de> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-03-12Input: wm9712 - fix return code for wrong sampleMarkus Pargmann
Instead of interpreting a wrong measurement as pen up, we should try to read again. Based on wm9712: pen up by Teresa Gámez and Christian Hemp. Signed-off-by: Markus Pargmann <mpa@pengutronix.de> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-03-12Input: wm97xx - drop out of range inputsMarkus Pargmann
With fast movements, there occured some out of screen jumps with my touchscreen. The abs_x and abs_y module parameters should fix this by default, but the driver doesn't actively checks the x/y coordinates. Instead it seems that the input layer was supposed to drop out of range inputs, as described in the comments: "These parameters are used to help the input layer discard out of range readings and reduce jitter etc" The input layer documentation describes that values that are not in the absolute range are also accepted. So this patch adds a check within the driver. Signed-off-by: Markus Pargmann <mpa@pengutronix.de> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-03-11Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull input updates from Dmitry Torokhov: "Except for the largish change to the ALPS driver adding "Dolphin V1" support and Wacom getting a new signature of yet another device, the rest are straightforward driver fixes." * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: mms114 - Fix regulator enable and disable paths Input: ads7864 - check return value of regulator enable Input: tc3589x-keypad - fix keymap size Input: wacom - add support for 0x10d Input: ALPS - update documentation for recent touchpad driver mods Input: ALPS - add "Dolphin V1" touchpad support Input: ALPS - remove unused argument to alps_enter_command_mode() Input: cypress_ps2 - fix trackpadi found in Dell XPS12
2013-03-10Input: mms114 - Fix regulator enable and disable pathsMark Brown
When it uses regulators the mms114 driver checks to see if it managed to acquire regulators and ignores errors. This is not the intended usage and not great style in general. Since the driver already refuses to probe if it fails to allocate the regulators simply make the enable and disable calls unconditional and add appropriate error handling, including adding cleanup of the regulators if setup_reg() fails. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-03-10Input: ads7864 - check return value of regulator enableMark Brown
At least print a warning if we can't power the device up. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-03-09Atmel MXT touchscreen: increase reset timeoutsLinus Torvalds
There is a more complete atmel patch-series out by Nick Dyer that fixes this and other things, but in the meantime this is the minimal thing to get the touchscreen going on (at least my) Pixel Chromebook. Not that I want my dirty fingers near that beautiful screen, but it seems that a non-initialized touchscreen will also end up being a constant wakeup source, so you have to disable it to go to sleep. And it's easier to just fix the initialization sequence. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-03-08Input: atmel_mxt_ts - Support for touchpad variantDaniel Kurtz
This same driver can be used by atmel based touchscreens and touchpads (buttonpads). Platform data may specify a device is a touchpad using the is_tp flag. This will cause the driver to perform some touchpad specific initializations, such as: * register input device name "Atmel maXTouch Touchpad" instead of Touchscreen. * register BTN_LEFT & BTN_TOOL_* event types. * register axis resolution (as a fixed constant, for now) * register BUTTONPAD property * process GPIO buttons using reportid T19 Input event GPIO mapping is done by the platform data key_map array. key_map[x] should contain the KEY or BTN code to send when processing GPIOx from T19. To specify a GPIO as not an input source, populate with KEY_RESERVED, or 0. Signed-off-by: Daniel Kurtz <djkurtz@chromium.org> Signed-off-by: Benson Leung <bleung@chromium.org> Signed-off-by: Nick Dyer <nick.dyer@itdev.co.uk> Tested-by: Olof Johansson <olof@lixom.net> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-25Input: auo-pixcir-ts - switch to using managed resourcesDmitry Torokhov
This simplifies error unwinding and device teardown. Tested-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-02-24Input: auo_pixcir_ts - add devicetree supportHeiko Stübner
Add the necessary code to create the needed platformdata from devicetree informations. The interrupt mode of the chip is not set via devicetree, as it is not a property of the hardware but instead only a preferred type of operation. This should probably be made settable via configfs in the future. The option set as default is the mode the datasheet mentions as default. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-02-24Input: auo_pixcir_ts - keep own pointer to platform_dataHeiko Stübner
When supporting devicetree the platformdata may not necessarily come from the dev but may be generated in the driver instead. Therefore keep the pointer in the driver struct instead of using dev.platform_data. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-02-24Input: auo-pixcir-ts - handle reset gpio directlyHeiko Stübner
Devicetree based platforms don't handle device callbacks very well and until now no board has come along that needs more extended hwinit than pulling the rst gpio high. Therefore pull the reset handling directly into the driver and remove the callbacks from the driver. If extended device setup is needed at some later point, power-sequences would probably be the solution of choice. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-02-24Input: auo-pixcir-ts - set input direction for interrupt gpioHeiko Stübner
Previously the gpio was not configured at all. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-02-20Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull input updates from Dmitry Torokhov: "Two new touchpad drivers - Cypress APA I2C Trackpad and Cypress PS/2 touchpad and a big update to ALPS driver from Kevin Cernekee that adds support for "Rushmore" touchpads and paves way for adding support for "Dolphin" touchpads. There is also a new input driver for Goldfish emulator and also Android keyreset driver was folded into SysRq code. A few more drivers were updated with device tree bindings and others got some small cleanups and fixes." * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (55 commits) Input: cyttsp-spi - remove duplicate MODULE_ALIAS() Input: tsc2005 - add MODULE_ALIAS Input: tegra-kbc - require CONFIG_OF, remove platform data Input: synaptics - initialize pointer emulation usage Input: MT - do not apply filtering on emulated events Input: bma150 - make some defines public and fix some comments Input: bma150 - fix checking pm_runtime_get_sync() return value Input: ALPS - enable trackstick on Rushmore touchpads Input: ALPS - add support for "Rushmore" touchpads Input: ALPS - make the V3 packet field decoder "pluggable" Input: ALPS - move pixel and bitmap info into alps_data struct Input: ALPS - fix command mode check Input: ALPS - rework detection of Pinnacle AGx touchpads Input: ALPS - move {addr,nibble}_command settings into alps_set_defaults() Input: ALPS - use function pointers for different protocol handlers Input: ALPS - rework detection sequence Input: ALPS - introduce helper function for repeated commands Input: ALPS - move alps_get_model() down below hw_init code Input: ALPS - copy "model" info into alps_data struct Input: ALPS - document the alps.h data structures ...
2013-02-16Input: cyttsp-spi - remove duplicate MODULE_ALIAS()Dmitry Torokhov
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-02-16Input: tsc2005 - add MODULE_ALIASPali Rohár
This enables autoloading of tsc2005 driver when is compiled as a module. Signed-off-by: Pali Rohár <pali.rohar@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-02-13Input: add couple of missing GENERIC_HARDIRQS dependenciesHeiko Carstens
When removing the !S390 dependency from drivers/input/Kconfig a couple of drivers don't compile because they have a dependency on GENERIC_HARDIRQS. So add the missing dependencies. Fixes e.g. this one: drivers/input/keyboard/lm8323.c: In function ‘lm8323_suspend’: drivers/input/keyboard/lm8323.c:801:2: error: implicit declaration of function ‘irq_set_irq_wake’ [-Werror=implicit-function-declaration] Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-01-17Input: mms114 - switch to using managed resourcesSachin Kamat
devm_* APIs are device managed and make the exit and clean up code simpler. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Acked-by: Laxman Dewangan<ldewangan@nvidia.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2012-12-24Input: wm831x-ts - convert to devm_input_allocate_device()Mark Brown
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2012-12-18Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull second round of input updates from Dmitry Torokhov: "As usual, there are a couple of new drivers, input core now supports managed input devices (devres), a slew of drivers now have device tree support and a bunch of fixes and cleanups." * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (71 commits) Input: walkera0701 - fix crash on startup Input: matrix-keymap - provide a proper module license Input: gpio_keys_polled - switch to using gpio_request_one() Input: gpio_keys - switch to using gpio_request_one() Input: wacom - fix touch support for Bamboo Fun CTH-461 Input: xpad - add a few new VID/PID combinations Input: xpad - minor formatting fixes Input: gpio-keys-polled - honor 'autorepeat' setting in platform data Input: tca8418-keypad - switch to using managed resources Input: tca8418_keypad - increase severity of failures in probe() Input: tca8418_keypad - move device ID tables closer to where they are used Input: tca8418_keypad - use dev_get_platdata() to retrieve platform data Input: tca8418_keypad - use a temporary variable for parent device Input: tca8418_keypad - add support for shared interrupt Input: tca8418_keypad - add support for device tree bindings Input: remove Compaq iPAQ H3600 (Bitsy) touchscreen driver Input: bu21013_ts - add support for Device Tree booting Input: bu21013_ts - move GPIO init and exit functions into the driver Input: bu21013_ts - request regulator that actually exists ARM: ux500: Strip out duplicate touch screen platform information ...
2012-12-16Input: stmpe-ts - report BTN_TOUCH eventVipul Kumar Samar
stmpe touchscreen supports BTN_TOUCH event but doesn't report it. Add BTN_TOUCH reporting capability to the stmpe touchscreen driver. Signed-off-by: Vipul Kumar Samar <vipulkumar.samar@st.com> Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org> Acked-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2012-12-16Merge tag 'mfd-3.8-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6 Pull MFS update from Samuel Ortiz: "This is the MFD patch set for the 3.8 merge window. We have several new drivers, most of the time coming with their sub devices drivers: - Austria Microsystem's AS3711 - Nano River's viperboard - TI's TPS80031, AM335x TS/ADC, - Realtek's MMC/memstick card reader - Nokia's retu We also got some notable cleanups and improvements: - tps6586x got converted to IRQ domains. - tps65910 and tps65090 moved to the regmap IRQ API. - STMPE is now Device Tree aware. - A general twl6040 and twl-core cleanup, with moves to the regmap I/O and IRQ APIs and a conversion to the recently added PWM framework. - sta2x11 gained regmap support. Then the rest is mostly tiny cleanups and fixes, among which we have Mark's wm5xxx and wm8xxx patchset." Far amount of annoying but largely trivial conflicts. Many due to __devinit/exit removal, others due to one or two of the new drivers also having come in through another tree. * tag 'mfd-3.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6: (119 commits) mfd: tps6507x: Convert to devm_kzalloc mfd: stmpe: Update DT support for stmpe driver mfd: wm5102: Add readback of DSP status 3 register mfd: arizona: Log if we fail to create the primary IRQ domain mfd: tps80031: MFD_TPS80031 needs to select REGMAP_IRQ mfd: tps80031: Add terminating entry for tps80031_id_table mfd: sta2x11: Fix potential NULL pointer dereference in __sta2x11_mfd_mask() mfd: wm5102: Add tuning for revision B mfd: arizona: Defer patch initialistation until after first device boot mfd: tps65910: Fix wrong ack_base register mfd: tps65910: Remove unused data mfd: stmpe: Get rid of irq_invert_polarity mfd: ab8500-core: Fix invalid free of devm_ allocated data mfd: wm5102: Mark DSP memory regions as volatile mfd: wm5102: Correct default for LDO1_CONTROL_2 mfd: arizona: Register haptics devices mfd: wm8994: Make current device behaviour the default mfd: tps65090: MFD_TPS65090 needs to select REGMAP_IRQ mfd: Fix stmpe.c build when OF is not enabled mfd: jz4740-adc: Use devm_kzalloc ...
2012-12-12Merge tag 'headers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds
Pull ARM SoC Header cleanups from Olof Johansson: "This is a collection of header file cleanups, mostly for OMAP and AT91, that keeps moving the platforms in the direction of multiplatform by removing the need for mach-dependent header files used in drivers and other places." Fix up mostly trivial conflicts as per Olof. * tag 'headers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (106 commits) ARM: OMAP2+: Move iommu/iovmm headers to platform_data ARM: OMAP2+: Make some definitions local ARM: OMAP2+: Move iommu2 to drivers/iommu/omap-iommu2.c ARM: OMAP2+: Move plat/iovmm.h to include/linux/omap-iommu.h ARM: OMAP2+: Move iopgtable header to drivers/iommu/ ARM: OMAP: Merge iommu2.h into iommu.h atmel: move ATMEL_MAX_UART to platform_data/atmel.h ARM: OMAP: Remove omap_init_consistent_dma_size() arm: at91: move at91rm9200 rtc header in drivers/rtc arm: at91: move reset controller header to arm/arm/mach-at91 arm: at91: move pit define to the driver arm: at91: move at91_shdwc.h to arch/arm/mach-at91 arm: at91: move board header to arch/arm/mach-at91 arn: at91: move at91_tc.h to arch/arm/mach-at91 arm: at91 move at91_aic.h to arch/arm/mach-at91 arm: at91 move board.h to arch/arm/mach-at91 arm: at91: move platfarm_data to include/linux/platform_data/atmel.h arm: at91: drop machine defconfig ARM: OMAP: Remove NEED_MACH_GPIO_H ARM: OMAP: Remove unnecessary mach and plat includes ...
2012-11-27Input: remove Compaq iPAQ H3600 (Bitsy) touchscreen driverAlexander Shiyan
The kernel does not contain the symbol SA1100_BITSY so the driver is never compiled and can be removed safely. Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2012-11-27Input: bu21013_ts - add support for Device Tree bootingLee Jones
Now we can register the BU21013_ts touch screen when booting with Device Tree enabled. Here we parse all the necessary components previously expected to be passed from platform data. Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2012-11-27Input: bu21013_ts - move GPIO init and exit functions into the driverLee Jones
These GPIO init and exit functions have no place in platform data, they should be part of the driver instead, Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2012-11-27Input: bu21013_ts - request regulator that actually existsLee Jones
Currently the BU21013 Touch Screen driver requests a regulator by the name of 'V-TOUCH', which doesn't exist anywhere in the kernel. The correct name, as referenced in platform regulator code is 'avdd'. Here, when we request a regulator, we use the correct name instead. Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2012-11-24Input: remove use of __devexitBill Pemberton
CONFIG_HOTPLUG is going away as an option so __devexit is no longer needed. Signed-off-by: Bill Pemberton <wfp5p@virginia.edu> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2012-11-24Input: remove use of __devinitBill Pemberton
CONFIG_HOTPLUG is going away as an option so __devinit is no longer needed. Signed-off-by: Bill Pemberton <wfp5p@virginia.edu> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Javier Martinez Canillas <javier@dowhile0.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2012-11-24Input: remove use of __devinitconstBill Pemberton
CONFIG_HOTPLUG is going away as an option so __devinitconst is no longer needed. Signed-off-by: Bill Pemberton <wfp5p@virginia.edu> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2012-11-24Input: remove use of __devinitdataBill Pemberton
CONFIG_HOTPLUG is going away as an option so __devinitdata is no longer needed. Signed-off-by: Bill Pemberton <wfp5p@virginia.edu> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2012-11-24Input: remove use of __devexit_pBill Pemberton
CONFIG_HOTPLUG is going away as an option so __devexit_p is no longer needed. Signed-off-by: Bill Pemberton <wfp5p@virginia.edu> Acked-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2012-11-24Merge branch 'for-linus' into nextDmitry Torokhov
Bring in changes to ads7846 to avoid mereg conflicts.
2012-11-22Input: stmpe-ts - add DT support for stmpe touchscreenVipul Kumar Samar
This patch allows the STMPE Touchscreen driver to be successfully probed and initialised when Device Tree support is enabled. Bindings are mentioned in Documentation too. Signed-off-by: Vipul Kumar Samar <vipulkumar.samar@st.com> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2012-11-21Input: ads7846 - enable pendown GPIO debounce time settingIgor Grinberg
Some platforms need the pendown GPIO debounce time setting programmed. Since the pendown GPIO is handled by the driver, the debounce time should also be handled along with the pendown GPIO request. Signed-off-by: Igor Grinberg <grinberg@compulab.co.il> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2012-11-20Input: da9052_tsi.c: Fix interrupt handlingFabio Estevam
Currently da9062_tsi does not probe and it fails as follows: da9052 1-0048: Unable to determine device interrupts Use the new da9052 irq functions and allow the driver to probe and operate correctly. Tested on mx53qsb board using 'evtest' tool. Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com> Cc: <linux-input@vger.kernel.org> Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-06-05 05:34:54 +0000