aboutsummaryrefslogtreecommitdiff
path: root/drivers/input
AgeCommit message (Collapse)Author
2011-08-03Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: ad7879 - fix deficient device disable Input: gpio_keys - fix two typos in devicetree documentation Input: mma8450 - add device tree probe support Input: gpio_keys - return proper error code if memory allocation fails Input: lm8323 - add missing device_remove_file for dev_attr_time Input: tegra-kbc - fix computation of polling time Input: kxtj9 - explicitly include module.h Input: psmouse - hgpk.c needs module.h
2011-08-02Input: ad7879 - fix deficient device disableMichael Hennerich
Input close or device disable should not interact with the exported gpiolib functionality. However that's the case. __ad7879_disable() clears the entire AD7879_REG_CTRL2, while it should just power down the ADC and its reference. Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-08-01input: xilinx_ps2: Add missing of_address.h headerMichal Simek
Add missing header. Error log: CC drivers/input/serio/xilinx_ps2.o drivers/input/serio/xilinx_ps2.c: In function 'xps2_of_probe': drivers/input/serio/xilinx_ps2.c:249: error: implicit declaration of function 'of_address_to_resource' Signed-off-by: Michal Simek <monstr@monstr.eu> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2011-07-31Input: mma8450 - add device tree probe supportShawn Guo
It adds device tree probe support for mma8450 driver. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Acked-by: Eric Miao <eric.miao@linaro.org> Acked-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-07-30Input: gpio_keys - return proper error code if memory allocation failsTobias Klauser
Return -ENOMEM if kzalloc fails in gpio_keys_get_devtree_pdata(). Signed-off-by: Tobias Klauser <tklauser@distanz.ch> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-07-30Input: lm8323 - add missing device_remove_file for dev_attr_timeAxel Lin
Add missing device_remove_file() for dev_attr_time in lm8323_remove(). Also calling device_remove_file() in lm8323_probe() error path to remove sysfs attribute file. Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-07-30Input: tegra-kbc - fix computation of polling timeRakesh Iyer
Fix a constant definition and computation of polling time. [dtor@mail.ru: switched to using DIV_ROUND_UP as was suggested by Thierry Reding <thierry.reding@avionic-design.de>] Signed-off-by: Rakesh Iyer <riyer@nvidia.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-07-30Input: kxtj9 - explicitly include module.hStephen Rothwell
We need to explicitly include module.h since some of its facilities are used. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-07-30Input: psmouse - hgpk.c needs module.hRandy Dunlap
hgpk.c uses interfaces from linux/module.h, so it should include that file. This fixes build errors. Signed-off-by: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-07-27Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (53 commits) Input: synaptics - fix reporting of min coordinates Input: tegra-kbc - enable key autorepeat Input: kxtj9 - fix locking typo in kxtj9_set_poll() Input: kxtj9 - fix bug in probe() Input: intel-mid-touch - remove pointless checking for variable 'found' Input: hp_sdc - staticize hp_sdc_kicker() Input: pmic8xxx-keypad - fix a leak of the IRQ during init failure Input: cy8ctmg110_ts - set reset_pin and irq_pin from platform data Input: cy8ctmg110_ts - constify i2c_device_id table Input: cy8ctmg110_ts - fix checking return value of i2c_master_send Input: lifebook - make dmi callback functions return 1 Input: atkbd - make dmi callback functions return 1 Input: gpio_keys - switch to using SIMPLE_DEV_PM_OPS Input: gpio_keys - add support for device-tree platform data Input: aiptek - remove double define Input: synaptics - set minimum coordinates as reported by firmware Input: synaptics - process button bits in AGM packets Input: synaptics - rename set_slot to be more descriptive Input: synaptics - fuzz position for touchpad with reduced filtering Input: synaptics - set resolution for MT_POSITION_X/Y axes ...
2011-07-27Merge branch 'next' into for-linusDmitry Torokhov
2011-07-26Merge branch 'next/devel2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/linux-arm-soc * 'next/devel2' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/linux-arm-soc: (47 commits) OMAP: Add debugfs node to show the summary of all clocks OMAP2+: hwmod: Follow the recommended PRCM module enable sequence OMAP2+: clock: allow per-SoC clock init code to prevent clockdomain calls from clock code OMAP2+: clockdomain: Add per clkdm lock to prevent concurrent state programming OMAP2+: PM: idle clkdms only if already in idle OMAP2+: clockdomain: add clkdm_in_hwsup() OMAP2+: clockdomain: Add 2 APIs to control clockdomain from hwmod framework OMAP: clockdomain: Remove redundant call to pwrdm_wait_transition() OMAP4: hwmod: Introduce the module control in hwmod control OMAP4: cm: Add two new APIs for modulemode control OMAP4: hwmod data: Add modulemode entry in omap_hwmod structure OMAP4: hwmod data: Add PRM context register offset OMAP4: prm: Remove deprecated functions OMAP4: prm: Replace warm reset API with the offset based version OMAP4: hwmod: Replace RSTCTRL absolute address with offset macros OMAP: hwmod: Wait the idle status to be disabled OMAP4: hwmod: Replace CLKCTRL absolute address with offset macros OMAP2+: hwmod: Init clkdm field at boot time OMAP4: hwmod data: Add clock domain attribute OMAP4: clock data: Add missing divider selection for auxclks ...
2011-07-25Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (43 commits) fs: Merge split strings treewide: fix potentially dangerous trailing ';' in #defined values/expressions uwb: Fix misspelling of neighbourhood in comment net, netfilter: Remove redundant goto in ebt_ulog_packet trivial: don't touch files that are removed in the staging tree lib/vsprintf: replace link to Draft by final RFC number doc: Kconfig: `to be' -> `be' doc: Kconfig: Typo: square -> squared doc: Konfig: Documentation/power/{pm => apm-acpi}.txt drivers/net: static should be at beginning of declaration drivers/media: static should be at beginning of declaration drivers/i2c: static should be at beginning of declaration XTENSA: static should be at beginning of declaration SH: static should be at beginning of declaration MIPS: static should be at beginning of declaration ARM: static should be at beginning of declaration rcu: treewide: Do not use rcu_read_lock_held when calling rcu_dereference_check Update my e-mail address PCIe ASPM: forcedly -> forcibly gma500: push through device driver tree ... Fix up trivial conflicts: - arch/arm/mach-ep93xx/dma-m2p.c (deleted) - drivers/gpio/gpio-ep93xx.c (renamed and context nearby) - drivers/net/r8169.c (just context changes)
2011-07-25Input: synaptics - fix reporting of min coordinatesDmitry Torokhov
We were testing wrong bit in the extended capability query. Reported-by: Daniel Kurtz <djkurtz@chromium.org> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-07-25Input: tegra-kbc - enable key autorepeatRakesh Iyer
To support key repeats, keyboard needs to be setup as an autorepeating device. Signed-off-by: Rakesh Iyer <riyer@nvidia.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-07-22Merge branch 'timers-cleanup-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'timers-cleanup-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: mips: Fix i8253 clockevent fallout i8253: Cleanup outb/inb magic arm: Footbridge: Use common i8253 clockevent mips: Use common i8253 clockevent x86: Use common i8253 clockevent i8253: Create common clockevent implementation i8253: Export i8253_lock unconditionally pcpskr: MIPS: Make config dependencies finer grained pcspkr: Cleanup Kconfig dependencies i8253: Move remaining content and delete asm/i8253.h i8253: Consolidate definitions of PIT_LATCH x86: i8253: Consolidate definitions of global_clock_event i8253: Alpha, PowerPC: Remove unused asm/8253pit.h alpha: i8253: Cleanup remaining users of i8253pit.h i8253: Remove I8253_LOCK config i8253: Make pcsp sound driver use the shared i8253_lock i8253: Make pcspkr input driver use the shared i8253_lock i8253: Consolidate all kernel definitions of i8253_lock i8253: Unify all kernel declarations of i8253_lock i8253: Create linux/i8253.h and use it in all 8253 related files
2011-07-19Input: kxtj9 - fix locking typo in kxtj9_set_poll()Dan Carpenter
According to the comments we want to call mutex_lock() here instead of mutex_unlock(). That makes more sense. Signed-off-by: Dan Carpenter <error27@gmail.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-07-19Input: kxtj9 - fix bug in probe()Dan Carpenter
We are testing the wrong variable here. I believe tj9->input_dev is always NULL at this point, so probe() will fail. Signed-off-by: Dan Carpenter <error27@gmail.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-07-18Input: intel-mid-touch - remove pointless checking for variable 'found'Axel Lin
The implementation does break from the for loop after we assign 'i' to variable 'found'. Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-07-18Input: hp_sdc - staticize hp_sdc_kicker()Axel Lin
It's not referenced outside this file so there's no need for it to be in the global name space. Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-07-18Input: pmic8xxx-keypad - fix a leak of the IRQ during init failureAxel Lin
Make sure we are passing the same cookie in all calls to request_any_context_irq() and free_irq(). Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-07-18Input: cy8ctmg110_ts - set reset_pin and irq_pin from platform dataAxel Lin
The implementation in cy8ctmg110_probe() does not properly set reset_pin and irq_pin from platform data. Let's fix it. Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-07-17Merge branches 'omap/prcm' and 'omap/mfd' of ↵Arnd Bergmann
git+ssh://master.kernel.org/pub/scm/linux/kernel/git/arm/linux-arm-soc into next/devel-2
2011-07-13Input: cy8ctmg110_ts - constify i2c_device_id tableAxel Lin
Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-07-13Input: cy8ctmg110_ts - fix checking return value of i2c_master_sendAxel Lin
i2c_master_send returns negative errno, or else the number of bytes written. Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-07-13Input: lifebook - make dmi callback functions return 1Axel Lin
We only care about if there is a successful match from the table (or no match at all), so let's make dmi_check_system return immediately instead of iterating thorough the whole table. Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-07-13Input: atkbd - make dmi callback functions return 1Axel Lin
We only care about if there is a successful match from the table (or no match at all), so let's make dmi_check_system return immediately instead of iterating thorough the whole table. Make the dmi callback function return 1 then dmi_check_system will return immediately if we have a successful match. Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-07-11Merge branch 'master' into for-nextJiri Kosina
Sync with Linus' tree to be able to apply pending patches that are based on newer code already present upstream.
2011-07-10Input: gpio_keys - switch to using SIMPLE_DEV_PM_OPSDmitry Torokhov
This reduces amount #ifdeds in the code. Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-07-10Input: gpio_keys - add support for device-tree platform dataDavid Jander
This patch enables fetching configuration data, which is normally provided via platform_data, from the device-tree instead. If the device is configured from device-tree data, the platform_data struct is not used, and button data needs to be allocated dynamically. Big part of this patch deals with confining pdata usage to the probe function, to make this possible. Signed-off-by: David Jander <david@protonic.nl> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-07-10Input: aiptek - remove double defineEdwin van Vliet
Constant AIPTEK_TOOL_BUTTON_PEN_MODE was defined twice. Signed-off-by: Edwin van Vliet <edwin@cheatah.nl> Reviewed-by: Jesper Juhl <jj@chaosbits.net> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-07-09Input: synaptics - set minimum coordinates as reported by firmwareDmitry Torokhov
Newer Synaptics firmware allows to query minimum coordinates reported by the device, let's use this data. Acked-by: Chase Douglas <chase.douglas@canonical.com> Acked-by: Henrik Rydberg <rydberg@euromail.se> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-07-07input: twl6040-vibra: Do not use wrapper for irq requestPeter Ujfalusi
The twl6040_request_irq/free_irq inline functions are going to be removed, so replace them with direct calls. The irq number is provided by the core driver via resource. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Reviewed-by: Felipe Balbi <balbi@ti.com> Acked-by: Dmitry Torokhov <dtor@mail.ru>
2011-07-06Input: synaptics - process button bits in AGM packetsDaniel Kurtz
AGM packets contain valid button bits, too. This patch refactors packet processing to parse button bits in AGM packets. However, they aren't actually used or reported. The point is to more completely process AGM packets, and prepare for future patches that may actually use AGM packet button bits. Signed-off-by: Daniel Kurtz <djkurtz@chromium.org> Acked-by: Chase Douglas <chase.douglas@canonical.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-07-06Input: synaptics - rename set_slot to be more descriptiveDaniel Kurtz
Signed-off-by: Daniel Kurtz <djkurtz@chromium.org> Acked-by: Chase Douglas <chase.douglas@canonical.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-07-06Input: synaptics - fuzz position for touchpad with reduced filteringDaniel Kurtz
Synaptics touchpads indicate via a capability bit when they perform reduced filtering on position data. In such a case, use a non-zero fuzz value. Fuzz = 8 was chosen empirically by observing the raw position data reported by a clickpad indicating it had reduced filtering. Signed-off-by: Daniel Kurtz <djkurtz@chromium.org> Acked-by: Chase Douglas <chase.douglas@canonical.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-07-06Input: synaptics - set resolution for MT_POSITION_X/Y axesDaniel Kurtz
Set resolution for MT_POSITION_X and MT_POSITION_Y to match ABS_X and ABS_Y, respectively. Signed-off-by: Daniel Kurtz <djkurtz@chromium.org> Acked-by: Chase Douglas <chase.douglas@canonical.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-07-06Input: wacom - cleanup a return value for the old BambooPing Cheng
The old code may call input_sync() without sending any other events. While it will be suppressed by the input core not calling it at all is still cheaper. Signed-off-by: Ping Cheng <pingc@wacom.com> Reviewed-by: Chris Bagwell <chris@cnpbagwell.com> Reviewed-by: Henrik Rydberg <rydberg@euromail.se> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-07-06Input: wacom - update Graphire4 and old Bamboo tablet buttonsPing Cheng
Bamboo touch sets BTN_BACK, BTN_FORWARD, BTN_LEFT, and BTN_RIGHT as the default button events for tablet buttons. Change Graphire4 and old Bamboo to the same settings. Signed-off-by: Ping Cheng <pingc@wacom.com> Reviewed-by: Chris Bagwell <chris@cnpbagwell.com> Reviewed-by: Henrik Rydberg <rydberg@euromail.se> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-07-06Input: wacom - add serial number for Graphire4 and old BambooPing Cheng
With the removal of BTN_TOOL_FINGER for tablet buttons and expresskeys, serial number is needed to distingush if the events were from a regular tool (stylus, eraser, or mouse) or the attribures (buttons, strips, or wheels) on the tablet since there are overlapped events between the tools and the tablet attributes. Signed-off-by: Ping Cheng <pingc@wacom.com> Reviewed-by: Chris Bagwell <chris@cnpbagwell.com> Reviewed-by: Henrik Rydberg <rydberg@euromail.se> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-07-06Input: wacom - remove BTN_TOOL_FINGER for padPing Cheng
BTN_TOOL_FINGER was designed to indicate a single finger touch. Remove the lines that borrowed this type for expresskeys and tablet buttons. Signed-off-by: Ping Cheng <pingc@wacom.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-07-06Input: add support for Kionix KXTJ9 accelerometerChris Hudson
Signed-off-by: Chris Hudson <chudson@kionix.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-07-05input: pmic8xxx-pwrkey: Do not use mfd_get_data()Samuel Ortiz
mfd_get_data() has been removed from the MFD API. Cc: Anirudh Ghayal <aghayal@codeaurora.org> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-07-05input: pmic8xxx-keypad: Do not use mfd_get_data()Samuel Ortiz
mfd_get_data() has been removed from the MFD API. Cc: Anirudh Ghayal <aghayal@codeaurora.org> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-07-04Input: wm97xx - mark channels which need pen_downWolfram Sang
Currently, battery drivers also use poll_sample() provided by the wm97xx-core but this code always checks if the pen is down. Mark the channels which really need this (i.e. for the touchscreen) with the PEN_DOWN bit, and skip the checks otherwise. Now, the battery channels can always be read. Signed-off-by: Wolfram Sang <w.sang@pengutronix.de> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-07-04Input: wm97xx - refactor channel selection in poll_sample()Wolfram Sang
The current implementation of poll_sample() has the problem that one of its arguments, the channel to be selected, differs from wm9713 to other variants. This parameter gets passed to the (currently unused) mach-specific functions pre_sample() and post_sample() which thus have to deal with codec-specific differences. Refactor the routine so that the argument to poll_sample() is generic for all codecs and do necessary conversions only in the codec-specific driver. The outcome even uses less code and removes the non-standard use of the PEN_DOWN bit to mark the AUX-channels. Signed-off-by: Wolfram Sang <w.sang@pengutronix.de> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-07-04Input: wm97xx - remove redundant defineWolfram Sang
Signed-off-by: Wolfram Sang <w.sang@pengutronix.de> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-07-04Input: xen-kbdfront - enable driver for HVM guestsStefano Stabellini
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Acked-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-07-04Input: xpad - enable rumble support for XBox360 Wireless ControllersChris Moeller
This patch implements rumble support for XBox360 Wireless Controllers. Signed-off-by: Chris Moeller <kode54@gmail.c> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-07-04input: Add initial support for TWL6040 vibratorMisael Lopez Cruz
Add twl6040_vibra as a child of MFD device twl6040_codec. This implementation covers the PCM-to-PWM mode of TWL6040 vibrator module. Signed-off-by: Misael Lopez Cruz <misael.lopez@ti.com> Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> CC: Tejun Heo <tj@kernel.org> Acked-by: Dmitry Torokhov <dtor@mail.ru>
generated by cgit v1.2.3 (git 2.25.1) at 2024-05-20 01:12:34 +0000