aboutsummaryrefslogtreecommitdiff
path: root/drivers/media/video
AgeCommit message (Collapse)Author
2011-04-19[media] omap3isp: queue: Don't corrupt buf->npages when get_user_pages() failsLaurent Pinchart
get_user_pages() can return a negative error code when it fails. Set buf->npages to 0 in that case, to prevent isp_video_buffer_cleanup() from releasing invalid pages. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-04-19[media] v4l: Don't register media entities for subdev device nodesLaurent Pinchart
Subdevs already have their own entity, don't register as second one when registering the subdev device node. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Sakari Ailus <sakari.ailus@maxwell.research.nokia.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-04-19[media] omap3isp: Don't increment node entity use count when poweron failsLaurent Pinchart
When open a device node, all entities part of the same pipeline are powered on. If one of the entities fails to be powered on, the open operations fails. In that case the device node entity use count must not be incremented. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-04-19[media] omap3isp: lane shifter supportMichael Jones
To use the lane shifter, set different pixel formats at each end of the link at the CCDC input. Signed-off-by: Michael Jones <michael.jones@matrix-vision.de> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-04-19[media] omap3isp: ccdc: support Y10/12, 8-bit bayer fmtsMichael Jones
Add support for 8-bit bayer and 10- and 12-bit grey formats at the CCDC input. Y12 is truncated to Y10 at the CCDC output. Signed-off-by: Michael Jones <michael.jones@matrix-vision.de> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-04-17cx23885: Fix stv0367 Kconfig dependencyMauro Carvalho Chehab
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-04-17[media] omap3isp: Use isp xclk definesStanimir Varbanov
Use isp defines for isp xclk selection in isp_set_xclk(). Signed-off-by: Stanimir Varbanov <svarbanov@mm-sol.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-04-17[media] omap3isp: isp: Reset the ISP when the pipeline can't be stoppedLaurent Pinchart
When a failure to stop a module in the pipeline is detected, the only way to recover is to reset the ISP. However, as other users can be using a different pipeline with other modules, the ISP can't be reset synchronously with the error detection. Mark the ISP as needing a reset when a failure to stop a pipeline is detected, and reset the ISP when the last user releases the last reference to the ISP. Modify the omap3isp_pipeline_set_stream() function to record the new ISP pipeline state only when no error occurs, except when stopping the pipeline in which case the pipeline is still marked as stopped. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-04-17[media] omap3isp: stat: update struct ispstat_generic_config's commentsDavid Cohen
struct ispstat_generic_config's comments refers to isph3a_aewb_config, isph3a_af_config and isphist_config. But those structs have had their names prefixed with 'omap3'. So, let's update the comments. Signed-off-by: David Cohen <david.cohen@nokia.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-04-17[media] omap3isp: Fix trivial typosMichael Jones
It doesn't get more trivial than these. Signed-off-by: Michael Jones <michael.jones@matrix-vision.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-04-17[media] omap3isp: resizer: Improved resizer rsz factor formulaSakari Ailus
Round properly the rsz factor so that we get highest rsz so that the input width (or height) is highest possible smaller or equal to what the user asks. Signed-off-by: Sakari Ailus <sakari.ailus@maxwell.research.nokia.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-04-17[media] omap3isp: resizer: Use 4-tap mode equations when the ratio is <= 512Laurent Pinchart
As the number of phases/taps, used to select the correct equations to compute the ratio, depends on the ratio, start with the 7-tap mode equations to compute an approximation of the ratio, and switch to the 4-tap mode equations if the approximation is lower than or equal to 512. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-04-13[media] omap3isp: resizer: Center the crop rectangleLaurent Pinchart
When the crop rectangle needs to be modified to match hardware requirements, center the resulting rectangle on the requested rectangle instead of removing pixels from the right and bottom sides only. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-04-13[media] V4L: mx3_camera: select VIDEOBUF2_DMA_CONTIG instead of ↵Uwe Kleine-König
VIDEOBUF_DMA_CONTIG Since commit 379fa5d ([media] V4L: mx3_camera: convert to videobuf2) mx3_camera uses videobuf2, but that commit didn't upgrade the select resulting in the following build failure: drivers/built-in.o: In function `mx3_camera_init_videobuf': clkdev.c:(.text+0x86580): undefined reference to `vb2_dma_contig_memops' drivers/built-in.o: In function `mx3_camera_probe': clkdev.c:(.devinit.text+0x3548): undefined reference to `vb2_dma_contig_init_ctx' clkdev.c:(.devinit.text+0x3578): undefined reference to `vb2_dma_contig_cleanup_ctx' drivers/built-in.o: In function `mx3_camera_remove': clkdev.c:(.devexit.text+0x674): undefined reference to `vb2_dma_contig_cleanup_ctx' make[2]: *** [.tmp_vmlinux1] Error 1 make[1]: *** [sub-make] Error 2 make: *** [all] Error 2 Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-04-13[media] sh_mobile_csi2: fix module reloadingGuennadi Liakhovetski
If the camera host driver (sh_mobile_ceu_camera.c) is unloaded and then reloaded, probe will fail, because camera client .set_bus_param() and .query_bus_param() methods have been set to NULL. Fix this by caching the original pointers and restoring them on driver-unbind. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-04-13[media] soc-camera: don't dereference I2C client after it has been removedGuennadi Liakhovetski
i2c_unregister_device() frees the I2C client, so, dereferencing it afterwards is a bug, that leads to Oopses. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-04-13[media] imx074: return a meaningful error code instead of -1Guennadi Liakhovetski
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-04-13[media] soc-camera: fix a recent multi-camera breakage on sh-mobileGuennadi Liakhovetski
With the introduction of CSI2 support on sh-mobile, the host driver switched to using v4l2_device_call_until_err() with grp_id == 0 to call subdev operations on the sensor and the CSI2 subdev. However, this has broken multi-client set ups like the one on migor, because that way all operations get called on both clients. To fix this add a grp_id and set it to the client private context. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-04-13[media] videobuf2: fix an error messageGuennadi Liakhovetski
buf->size is not yet initialised in videobuf2-dma-contig at the time of the error message, use "size." Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-04-13[media] videobuf2: fix core to correctly identify allocation failuresGuennadi Liakhovetski
The videobuf2-dma-contig allocator returns an ERR_PTR() on failure, not a NULL like all other allocators. Fix videobuf2-core to also correctly recognise those failures. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-04-13[media] cx18: Fix list BUG for IDX stream, triggerable in cx18_probe() error ↵Andy Walls
clean up, If allocating stream buffers for one of the primary streams (e.g. YUV) failed during card probe, the error path clean up would try to manipulate the yet unitialized IDX stream structures. This caused a BUG due to unitialized list heads. Detect that case and ignore the uninitialized IDX stream. Signed-off-by: Andy Walls <awalls@md.metrocast.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-03-24Merge branch 'v4l_for_linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6 * 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6: (442 commits) [media] videobuf2-dma-contig: make cookie() return a pointer to dma_addr_t [media] sh_mobile_ceu_camera: Do not call vb2's mem_ops directly [media] V4L: soc-camera: explicitly require V4L2_BUF_TYPE_VIDEO_CAPTURE [media] v4l: soc-camera: Store negotiated buffer settings [media] rc: interim support for 32-bit NEC-ish scancodes [media] mceusb: topseed 0x0011 needs gen3 init for tx to work [media] lirc_zilog: error out if buffer read bytes != chunk size [media] lirc: silence some compile warnings [media] hdpvr: use same polling interval as other OS [media] ir-kbd-i2c: pass device code w/key in hauppauge case [media] rc/keymaps: Remove the obsolete rc-rc5-tv keymap [media] remove the old RC_MAP_HAUPPAUGE_NEW RC map [media] rc/keymaps: Rename Hauppauge table as rc-hauppauge [media] rc-rc5-hauppauge-new: Fix Hauppauge Grey mapping [media] rc-rc5-hauppauge-new: Add support for the old Black RC [media] rc-rc5-hauppauge-new: Add the old control to the table [media] rc-winfast: Fix the keycode tables [media] a800: Fix a few wrong IR key assignments [media] opera1: Use multimedia keys instead of an app-specific mapping [media] dw2102: Use multimedia keys instead of an app-specific mapping ... Fix up trivial conflicts (remove/modify and some real conflicts) in: arch/arm/mach-omap2/devices.c drivers/staging/Kconfig drivers/staging/Makefile drivers/staging/dabusb/dabusb.c drivers/staging/dabusb/dabusb.h drivers/staging/easycap/easycap_ioctl.c drivers/staging/usbvideo/usbvideo.c drivers/staging/usbvideo/vicam.c
2011-03-23mfd: mfd_cell is now implicitly available to timberdale driversAndres Salomon
The cell's platform_data is now accessed with a helper function; change clients to use that, and remove the now-unused data_size. Note that the mfd's platform_data is marked __devinitdata. This is still correct in all cases except for the timbgpio driver, whose remove hook has been changed to no longer reference the pdata. Signed-off-by: Andres Salomon <dilinger@queued.net> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-03-22[media] videobuf2-dma-contig: make cookie() return a pointer to dma_addr_tPawel Osciak
dma_addr_t may not fit into void* on some architectures. To be safe, make vb2_dma_contig_cookie() return a pointer to dma_addr_t and dereference it in vb2_dma_contig_plane_paddr() back to dma_addr_t. Signed-off-by: Pawel Osciak <pawel@osciak.com> Reported-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-03-22[media] sh_mobile_ceu_camera: Do not call vb2's mem_ops directlyPawel Osciak
Use vb2_dma_contig_plane_paddr to retrieve a physical address for a plane instead of calling an internal mem_ops callback. Signed-off-by: Pawel Osciak <pawel@osciak.com> Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-03-22[media] V4L: soc-camera: explicitly require V4L2_BUF_TYPE_VIDEO_CAPTUREGuennadi Liakhovetski
The soc-camera core accesses the "pix" member of the struct v4l2_format::fmt union, which is only valid for V4L2_BUF_TYPE_VIDEO_CAPTURE streams. This patch adds explicit checks for this to {g,s,try}_fmt methods. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-03-22[media] v4l: soc-camera: Store negotiated buffer settingsSergio Aguirre
This fixes the problem in which a host driver sets a personalized sizeimage or bytesperline field, and gets ignored when doing G_FMT. Signed-off-by: Sergio Aguirre <saaguirre@ti.com> Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-03-22[media] hdpvr: use same polling interval as other OSJarod Wilson
The hdpvr's IR part, in short, sucks. As observed with a usb traffic sniffer, the Windows software for it uses a polling interval of 405ms. Its still not behaving as well as I'd like even with this change, but this inches us closer and closer to that point... Signed-off-by: Jarod Wilson <jarod@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-03-22[media] ir-kbd-i2c: pass device code w/key in hauppauge caseJarod Wilson
The new hauppauge key tables use both device code button code. Signed-off-by: Jarod Wilson <jarod@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-03-22[media] rc/keymaps: Remove the obsolete rc-rc5-tv keymapMauro Carvalho Chehab
This keymap were used for the Hauppauge Black remote controller only. It also contains some keycodes not found there. As the Hauppauge Black is now part of the hauppauge keymap, just remove it. Also, remove the modprobe hacks to select between the Gray and the Black versions of the remote controller as: - Both are supported by default by the keymap; - If the user just wants one keyboard supported, it is just a matter of changing the keymap via the userspace tool (ir-keytable), removing the keys that he doesn't desire. As ir-keytable auto-loads the keys via udev, this is better than obscure modprobe parameters. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by: Jarod Wilson <jarod@redhat.com>
2011-03-22[media] remove the old RC_MAP_HAUPPAUGE_NEW RC mapMauro Carvalho Chehab
The rc-hauppauge-new map is a messy thing, as it bundles 3 different remote controllers as if they were just one, discarding the address byte. Also, some key maps are wrong. With the conversion to the new rc-core, it is likely that most of the devices won't be working properly, as the i2c driver and the raw decoders are now providing 16 bits for the remote, instead of just 8. delete mode 100644 drivers/media/rc/keymaps/rc-hauppauge-new.c Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by: Jarod Wilson <jarod@redhat.com>
2011-03-22[media] rc/keymaps: Rename Hauppauge table as rc-hauppaugeMauro Carvalho Chehab
There are two "hauppauge-new" keymaps, one with protocol unknown, and the other with the protocol marked accordingly. However, both tables are miss-named. Also, the old rc-hauppauge-new is broken, as it mixes three different controllers as if they were just one. This patch solves half of the problem by renaming the correct keycode table as just rc-hauppauge. This table contains the codes for the four different types of remote controllers found on Hauppauge cards, properly mapped with their different addresses. create mode 100644 drivers/media/rc/keymaps/rc-hauppauge.c delete mode 100644 drivers/media/rc/keymaps/rc-rc5-hauppauge-new.c [Jarod: fix up RC_MAP_HAUPPAUGE defines] Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by: Jarod Wilson <jarod@redhat.com>
2011-03-22[media] hdpvr: i2c master enhancementsJarod Wilson
Make the hdpvr's i2c master implementation more closely mirror that of the pvrusb2 driver. Currently makes no significant difference in IR reception behavior with ir-kbd-i2c (i.e., it still sucks). Signed-off-by: Jarod Wilson <jarod@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-03-22[media] saa7134: Fix strange kconfig dependency on RC_CORESteven Rostedt
As the code in saa7134-input is not a module, but the config for it is set as a boolean instead of a tristate, this causes a strange dependency on RC_CORE. VIDEO_SAA7134_RC (which determines if saa7134-input.o is built) depends on RC_CORE and VIDEO_SAA7134. If VIDEO_SAA7134 is compiled as 'y' but RC_CORE is compiled as 'm' VIDEO_SAA7134_RC can still be set to 'y' which causes undefined symbols that it needs from RC_CORE. The simplest solution is to not allow VIDEO_SAA7134_RC be enabled if RC_CORE compiled as a module (m) and VIDEO_SA7134 is compiled into the kernel (y). Suggested-by: Mauro Carvalho Chehab <mchehab@redhat.com> Cc: Michal Marek <mmarek@suse.cz> Cc: linux-kbuild <linux-kbuild@vger.kernel.org> Signed-off-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-03-22[media] gspca - zc3xx: Add exposure control for sensor hv7131rJean-François Moine
Signed-off-by: Jean-François Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-03-22[media] gspca - main: Add endpoint direction test in alt_xferPatrice Chotard
This patch fixes a bug in gspca, more precisely in alt_xfer(). This function looks for an input transfer endpoint in an alternate setting. By default it returns the first endpoint corresponding to the transfer type indicated in parameter. But with some USB devices, the first endpoint corresponding to the transfer type is not always an INPUT endpoint but an OUTPUT one. This patch adds the endpoint direction test to be sure to return an INPUT endpoint Signed-off-by: Patrice CHOTARD <patricechotard@free.fr> Signed-off-by: Jean-François Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-03-22[media] gspca - nw80x: Fix exposure for some webcamsJean-François Moine
Signed-off-by: Jean-François Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-03-22[media] gspca - nw80x: Get the sensor ID when bridge et31x110Jean-François Moine
Signed-off-by: Jean-François Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-03-22[media] gspca - nw80x: Fix some image resolutionsJean-François Moine
No 352x288 for Ds3303 and no 320x240 for Generic802. Signed-off-by: Jean-François Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-03-22[media] gspca - nw80x: Check the bridge from the webcam typeJean-François Moine
Signed-off-by: Jean-François Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-03-22[media] gspca - nw80x: Fix the gain, exposure and autogainJean-François Moine
The autogain now uses common functions. Signed-off-by: Jean-François Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-03-22[media] gspca - nw80x: Do some initialization at probe timeJean-François Moine
Signed-off-by: Jean-François Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-03-22[media] gspca - nw80x: The webcam dsb-c110 is the same as the twinkleJean-François Moine
Signed-off-by: Jean-François Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-03-22[media] gspca - nw80x: Cleanup sourceJean-François Moine
Signed-off-by: Jean-François Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-03-22[media] v4l2: use new flag to enable core priority handlingHans Verkuil
Rather than guess which driver supports core priority handling, require drivers that do to explicitly set the V4L2_FL_USE_FH_PRIO flag in video_device. Updated the core prio handling accordingly and set the flag in the three drivers that do. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-03-22[media] ivtv: replace ugly casts with a proper container_ofHans Verkuil
ivtv-ioctl cast the 'void *fh' directly to 'ivtv_open_id *'. This should be done properly with a contained_of since the 'void *fh' is really a 'struct v4l2_fh *'. It worked because the v4l2_fh field is also the first field in the ivtv_open_id struct, but it is not clean code. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-03-22[media] ivtv: add missing v4l2_fh_exitHans Verkuil
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-03-22[media] vivi: convert to core priority handlingHans Verkuil
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-03-22[media] v4l2-device: add kref and a release functionHans Verkuil
The video_device struct has proper ref counting and its release function will be called when the last user releases it. But no such support was available for struct v4l2_device. This made it hard to determine when a USB driver can release the device if it has multiple device nodes. With one device node it is easy of course, since when the device node is released, the whole device can be released. This patch adds refcounting to v4l2_device. When registering device nodes the v4l2_device refcount will be increased, when releasing device nodes it will be decreased. The (optional) release function will be called when the last device node was released. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-03-22[media] cx18: use core priority handlingHans Verkuil
VIDIOC_S/G_PRIORITY handling is now done by the v4l2 core framework. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-07-18 10:31:54 +0000