aboutsummaryrefslogtreecommitdiff
path: root/drivers/net/ethernet/intel
AgeCommit message (Collapse)Author
2013-04-10e100: Add dma mapping error checkNeil Horman
e100 uses pci_map_single, but fails to check for a dma mapping error after its use, resulting in a stack trace: [ 46.656594] ------------[ cut here ]------------ [ 46.657004] WARNING: at lib/dma-debug.c:933 check_unmap+0x47b/0x950() [ 46.657004] Hardware name: To Be Filled By O.E.M. [ 46.657004] e100 0000:00:0e.0: DMA-API: device driver failed to check map error[device address=0x000000007a4540fa] [size=90 bytes] [mapped as single] [ 46.657004] Modules linked in: [ 46.657004] w83627hf hwmon_vid snd_via82xx ppdev snd_ac97_codec ac97_bus snd_seq snd_pcm snd_mpu401 snd_mpu401_uart ns558 snd_rawmidi gameport parport_pc e100 snd_seq_device parport snd_page_alloc snd_timer snd soundcore skge shpchp k8temp mii edac_core i2c_viapro edac_mce_amd nfsd auth_rpcgss nfs_acl lockd sunrpc binfmt_misc uinput ata_generic pata_acpi radeon i2c_algo_bit drm_kms_helper ttm firewire_ohci drm firewire_core pata_via sata_via i2c_core sata_promise crc_itu_t [ 46.657004] Pid: 792, comm: ip Not tainted 3.8.0-0.rc6.git0.1.fc19.x86_64 #1 [ 46.657004] Call Trace: [ 46.657004] <IRQ> [<ffffffff81065ed0>] warn_slowpath_common+0x70/0xa0 [ 46.657004] [<ffffffff81065f4c>] warn_slowpath_fmt+0x4c/0x50 [ 46.657004] [<ffffffff81364cfb>] check_unmap+0x47b/0x950 [ 46.657004] [<ffffffff8136522f>] debug_dma_unmap_page+0x5f/0x70 [ 46.657004] [<ffffffffa030f0f0>] ? e100_tx_clean+0x30/0x210 [e100] [ 46.657004] [<ffffffffa030f1a8>] e100_tx_clean+0xe8/0x210 [e100] [ 46.657004] [<ffffffffa030fc6f>] e100_poll+0x56f/0x6c0 [e100] [ 46.657004] [<ffffffff8159dce1>] ? net_rx_action+0xa1/0x370 [ 46.657004] [<ffffffff8159ddb2>] net_rx_action+0x172/0x370 [ 46.657004] [<ffffffff810703bf>] __do_softirq+0xef/0x3d0 [ 46.657004] [<ffffffff816e4ebc>] call_softirq+0x1c/0x30 [ 46.657004] [<ffffffff8101c485>] do_softirq+0x85/0xc0 [ 46.657004] [<ffffffff81070885>] irq_exit+0xd5/0xe0 [ 46.657004] [<ffffffff816e5756>] do_IRQ+0x56/0xc0 [ 46.657004] [<ffffffff816dacb2>] common_interrupt+0x72/0x72 [ 46.657004] <EOI> [<ffffffff816da1eb>] ? _raw_spin_unlock_irqrestore+0x3b/0x70 [ 46.657004] [<ffffffff816d124d>] __slab_free+0x58/0x38b [ 46.657004] [<ffffffff81214424>] ? fsnotify_clear_marks_by_inode+0x34/0x120 [ 46.657004] [<ffffffff811b0417>] ? kmem_cache_free+0x97/0x320 [ 46.657004] [<ffffffff8157fc14>] ? sock_destroy_inode+0x34/0x40 [ 46.657004] [<ffffffff8157fc14>] ? sock_destroy_inode+0x34/0x40 [ 46.657004] [<ffffffff811b0692>] kmem_cache_free+0x312/0x320 [ 46.657004] [<ffffffff8157fc14>] sock_destroy_inode+0x34/0x40 [ 46.657004] [<ffffffff811e8c28>] destroy_inode+0x38/0x60 [ 46.657004] [<ffffffff811e8d5e>] evict+0x10e/0x1a0 [ 46.657004] [<ffffffff811e9605>] iput+0xf5/0x180 [ 46.657004] [<ffffffff811e4338>] dput+0x248/0x310 [ 46.657004] [<ffffffff811ce0e1>] __fput+0x171/0x240 [ 46.657004] [<ffffffff811ce26e>] ____fput+0xe/0x10 [ 46.657004] [<ffffffff8108d54c>] task_work_run+0xac/0xe0 [ 46.657004] [<ffffffff8106c6ed>] do_exit+0x26d/0xc30 [ 46.657004] [<ffffffff8109eccc>] ? finish_task_switch+0x7c/0x120 [ 46.657004] [<ffffffff816dad58>] ? retint_swapgs+0x13/0x1b [ 46.657004] [<ffffffff8106d139>] do_group_exit+0x49/0xc0 [ 46.657004] [<ffffffff8106d1c4>] sys_exit_group+0x14/0x20 [ 46.657004] [<ffffffff816e3b19>] system_call_fastpath+0x16/0x1b [ 46.657004] ---[ end trace 4468c44e2156e7d1 ]--- [ 46.657004] Mapped at: [ 46.657004] [<ffffffff813663d1>] debug_dma_map_page+0x91/0x140 [ 46.657004] [<ffffffffa030e8eb>] e100_xmit_prepare+0x12b/0x1c0 [e100] [ 46.657004] [<ffffffffa030c924>] e100_exec_cb+0x84/0x140 [e100] [ 46.657004] [<ffffffffa030e56a>] e100_xmit_frame+0x3a/0x190 [e100] [ 46.657004] [<ffffffff8159ee89>] dev_hard_start_xmit+0x259/0x6c0 Easy fix, modify the cb paramter to e100_exec_cb to return an error, and do the dma_mapping_error check in the obvious place This was reported previously here: http://article.gmane.org/gmane.linux.network/257893 But nobody stepped up and fixed it. CC: Josh Boyer <jwboyer@redhat.com> CC: e1000-devel@lists.sourceforge.net Signed-off-by: Neil Horman <nhorman@tuxdriver.com> Reported-by: Michal Jaegermann <michal@harddata.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-05ixgbe: fix registration order of driver and DCA nofiticationJakub Kicinski
ixgbe_notify_dca cannot be called before driver registration because it expects driver's klist_devices to be allocated and initialized. While on it make sure debugfs files are removed when registration fails. Cc: stable <stable@vger.kernel.org> Signed-off-by: Jakub Kicinski <jakub.kicinski@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-27e1000e: Add missing dma_mapping_error-call in e1000_alloc_jumbo_rx_buffersChristoph Paasch
After dma_map_page, dma_mapping_error must be called. It seems safe to not free the skb/page allocated in this function, as the skb/page can be reused later. Signed-off-by: Christoph Paasch <christoph.paasch@uclouvain.be> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2013-03-27ixgb: Add missing dma_mapping_error-call in ixgb_alloc_rx_buffersChristoph Paasch
After dma_map_single, dma_mapping_error must be called. It seems safe to not free the skb allocated in this function, as the skb can be reused later. Additionally this patch fixes one coding-style error. Signed-off-by: Christoph Paasch <christoph.paasch@uclouvain.be> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2013-03-27e1000: ethtool: Add missing dma_mapping_error-call in e1000_setup_desc_ringsChristoph Paasch
After dma_map_single, dma_mapping_error must be called. Signed-off-by: Christoph Paasch <christoph.paasch@uclouvain.be> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2013-03-26igb: fix PHC stopping on max freqJiri Benc
For 82576 MAC type, max_adj is reported as 1000000000 ppb. However, if this value is passed to igb_ptp_adjfreq_82576, incvalue overflows out of INCVALUE_82576_MASK, resulting in setting of zero TIMINCA.incvalue, stopping the PHC (instead of going at twice the nominal speed). Fix the advertised max_adj value to the largest value hardware can handle. As there is no min_adj value available (-max_adj is used instead), this will also prevent stopping the clock intentionally. It's probably not a big deal, other igb MAC types don't support stopping the clock, either. Signed-off-by: Jiri Benc <jbenc@redhat.com> Acked-by: Matthew Vick <matthew.vick@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2013-03-26igb: make sensor info staticStephen Hemminger
Trivial sparse warning. Signed-off-by: Stephen Hemminger <stephen@networkplumber.org> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2013-03-26igb: SR-IOV init reorderingAlex Williamson
igb is ineffective at setting a lower total VFs because: int pci_sriov_set_totalvfs(struct pci_dev *dev, u16 numvfs) { ... /* Shouldn't change if VFs already enabled */ if (dev->sriov->ctrl & PCI_SRIOV_CTRL_VFE) return -EBUSY; Swap init ordering. Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Acked-by: Greg Rose <gregory.v.rose@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2013-03-26igb: Fix null pointer dereferenceAlex Williamson
The max_vfs= option has always been self limiting to the number of VFs supported by the device. fa44f2f1 added SR-IOV configuration via sysfs, but in the process broke this self correction factor. The failing path is: igb_probe igb_sw_init if (max_vfs > 7) { adapter->vfs_allocated_count = 7; ... igb_probe_vfs igb_enable_sriov(, max_vfs) if (num_vfs > 7) { err = -EPERM; ... This leaves vfs_allocated_count = 7 and vf_data = NULL, so we bomb out when igb_probe finally calls igb_reset. It seems like a really bad idea, and somewhat pointless, to set vfs_allocated_count separate from vf_data, but limiting max_vfs is enough to avoid the null pointer. Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Acked-by: Greg Rose <gregory.v.rose@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2013-03-26igb: fix i350 anti spoofing configLior Levy
Fix a problem in i350 where anti spoofing configuration was written into a wrong register. Signed-off-by: Lior Levy <lior.levy@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2013-03-26ixgbevf: don't release the soft entriesxunleer
When the ixgbevf driver is opened the request to allocate MSIX irq vectors may fail. In that case the driver will call ixgbevf_down() which will call ixgbevf_irq_disable() to clear the HW interrupt registers and calls synchronize_irq() using the msix_entries pointer in the adapter structure. However, when the function to request the MSIX irq vectors failed it had already freed the msix_entries which causes an OOPs from using the NULL pointer in synchronize_irq(). The calls to pci_disable_msix() and to free the msix_entries memory should not occur if device open fails. Instead they should be called during device driver removal to balance with the call to pci_enable_msix() and the call to allocate msix_entries memory during the device probe and driver load. Signed-off-by: Li Xun <xunleer.li@huawei.com> Signed-off-by: Greg Rose <gregory.v.rose@intel.com> Tested-by: Sibai Li <sibai.li@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2013-03-07e1000e: fix accessing to suspended deviceKonstantin Khlebnikov
This patch fixes some annoying messages like 'Error reading PHY register' and 'Hardware Erorr' and saves several seconds on reboot. Cc: Bruce Allan <bruce.w.allan@intel.com> Signed-off-by: Konstantin Khlebnikov <khlebnikov@openvz.org> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Tested-by: Borislav Petkov <bp@suse.de> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2013-03-07e1000e: fix runtime power management transitionsKonstantin Khlebnikov
This patch removes redundant actions from driver and fixes its interaction with actions in pci-bus runtime power management code. It removes pci_save_state() from __e1000_shutdown() for normal adapters, PCI bus callbacks pci_pm_*() will do all this for us. Now __e1000_shutdown() switches to D3-state only quad-port adapters, because they needs quirk for clearing false-positive error from downsteam pci-e port. pci_save_state() now called after clearing bus-master bit, thus __e1000_resume() and e1000_io_slot_reset() must set it back after restoring configuration space. This patch set get_link_status before calling pm_runtime_put() in e1000_open() to allow e1000_idle() get real link status and schedule first runtime suspend. This patch also enables wakeup for device if management mode is enabled (like for WoL) as result pci_prepare_to_sleep() would setup wakeup without special actions like custom 'enable_wakeup' sign. Cc: Bruce Allan <bruce.w.allan@intel.com> Signed-off-by: Konstantin Khlebnikov <khlebnikov@openvz.org> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Tested-by: Borislav Petkov <bp@suse.de> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2013-03-07e1000e: fix pci-device enable-counter balanceKonstantin Khlebnikov
This patch removes redundant and unbalanced pci_disable_device() from __e1000_shutdown(). pci_clear_master() is enough, device can go into suspended state with elevated enable_cnt. Bug was introduced in commit 23606cf5d1192c2b17912cb2ef6e62f9b11de133 ("e1000e / PCI / PM: Add basic runtime PM support (rev. 4)") in v2.6.35 Cc: Bruce Allan <bruce.w.allan@intel.com> CC: Stable <stable@kernel.org> Signed-off-by: Konstantin Khlebnikov <khlebnikov@openvz.org> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Tested-by: Borislav Petkov <bp@suse.de> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2013-03-05Merge branch 'master' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/net into intel Jeff Kirsher says: =================== This series contains fixes to e1000e and igb. The e1000e fix resolves an issue at 1000Mbps link speed, where one of the MAC's internal clocks can be stopped for up to 4us when entering K1 (a power mode of the MAC-PHY interconnect). If the MAC is waiting for completion indications for 2 DMA write requests into Host memory (e.g. descriptor writeback or Rx packet writing) and the indications occur while the clock is stopped, both indications will be missed by the MAC causing the MAC to wait for the completion indications and be unable to generate further DMA write requests. This results in an apparent hardware hang. The patch works-around the issue by disabling the de-assertion of the clock request when 1000Mbps link is acquired (K1 must be disabled while doing this). The igb fix to drop BUILD_BUG_ON check from igb_build_rx_buffer resolves a build error on s390 devices. The igb driver was throwing a build error due to the fact that a frame built using build_skb would be larger than 2K. Since this is not likely to change at any point in the future we are better off just dropping the check since we already had a check in igb_set_rx_buffer_len that will just disable the usage of build_skb anyway. The igb fix for i210 link setup changes the setup copper link function to use a switch statement, so that the appropriate setup link function is called for the given PHY types. Lastly, the igb fix for a lockdep issue in igb_get_i2c_client resolves the issue by re-factoring the initialization and usage of the i2c_client. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-05igb: Fix for lockdep issue in igb_get_i2c_clientCarolyn Wyborny
This patch fixes a lockdep warning in igb_get_i2c_client by refactoring the initialization and usage of the i2c_client completely. There is no on the fly allocation of the single client needed today. Signed-off-by: Carolyn Wyborny <carolyn.wyborny@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2013-03-05igb: Fix link setup for I210 devicesCarolyn Wyborny
This patch changes the setup copper link function to use a switch statement for the PHY id's available for the given PHY types. It also adds a case for the I210 PHY id, so the appropriate setup link function is called for it. Signed-off-by: Carolyn Wyborny <carolyn.wyborny@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2013-03-05igb: Drop BUILD_BUG_ON check from igb_build_rx_bufferAlexander Duyck
On s390 the igb driver was throwing a build error due to the fact that a frame built using build_skb would be larger than 2K. Since this is not likely to change at any point in the future we are better off just dropping the check since we already had a check in igb_set_rx_buffer_len that will just disable the usage of build_skb anyway. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2013-03-05e1000e: workaround DMA unit hang on I218Bruce Allan
At 1000Mbps link speed, one of the MAC's internal clocks can be stopped for up to 4us when entering K1 (a power mode of the MAC-PHY interconnect). If the MAC is waiting for completion indications for 2 DMA write requests into Host memory (e.g. descriptor writeback or Rx packet writing) and the indications occur while the clock is stopped, both indications will be missed by the MAC causing the MAC to wait for the completion indications and be unable to generate further DMA write requests. This results in an apparent hardware hang. Work-around the issue by disabling the de-assertion of the clock request when 1000Mbps link is acquired (K1 must be disabled while doing this). Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Tested-by: Jeff Pieper <jeffrey.e.pieper@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2013-02-27hlist: drop the node parameter from iteratorsSasha Levin
I'm not sure why, but the hlist for each entry iterators were conceived list_for_each_entry(pos, head, member) The hlist ones were greedy and wanted an extra parameter: hlist_for_each_entry(tpos, pos, head, member) Why did they need an extra pos parameter? I'm not quite sure. Not only they don't really need it, it also prevents the iterator from looking exactly like the list iterator, which is unfortunate. Besides the semantic patch, there was some manual work required: - Fix up the actual hlist iterators in linux/list.h - Fix up the declaration of other iterators based on the hlist ones. - A very small amount of places were using the 'node' parameter, this was modified to use 'obj->member' instead. - Coccinelle didn't handle the hlist_for_each_entry_safe iterator properly, so those had to be fixed up manually. The semantic patch which is mostly the work of Peter Senna Tschudin is here: @@ iterator name hlist_for_each_entry, hlist_for_each_entry_continue, hlist_for_each_entry_from, hlist_for_each_entry_rcu, hlist_for_each_entry_rcu_bh, hlist_for_each_entry_continue_rcu_bh, for_each_busy_worker, ax25_uid_for_each, ax25_for_each, inet_bind_bucket_for_each, sctp_for_each_hentry, sk_for_each, sk_for_each_rcu, sk_for_each_from, sk_for_each_safe, sk_for_each_bound, hlist_for_each_entry_safe, hlist_for_each_entry_continue_rcu, nr_neigh_for_each, nr_neigh_for_each_safe, nr_node_for_each, nr_node_for_each_safe, for_each_gfn_indirect_valid_sp, for_each_gfn_sp, for_each_host; type T; expression a,c,d,e; identifier b; statement S; @@ -T b; <+... when != b ( hlist_for_each_entry(a, - b, c, d) S | hlist_for_each_entry_continue(a, - b, c) S | hlist_for_each_entry_from(a, - b, c) S | hlist_for_each_entry_rcu(a, - b, c, d) S | hlist_for_each_entry_rcu_bh(a, - b, c, d) S | hlist_for_each_entry_continue_rcu_bh(a, - b, c) S | for_each_busy_worker(a, c, - b, d) S | ax25_uid_for_each(a, - b, c) S | ax25_for_each(a, - b, c) S | inet_bind_bucket_for_each(a, - b, c) S | sctp_for_each_hentry(a, - b, c) S | sk_for_each(a, - b, c) S | sk_for_each_rcu(a, - b, c) S | sk_for_each_from -(a, b) +(a) S + sk_for_each_from(a) S | sk_for_each_safe(a, - b, c, d) S | sk_for_each_bound(a, - b, c) S | hlist_for_each_entry_safe(a, - b, c, d, e) S | hlist_for_each_entry_continue_rcu(a, - b, c) S | nr_neigh_for_each(a, - b, c) S | nr_neigh_for_each_safe(a, - b, c, d) S | nr_node_for_each(a, - b, c) S | nr_node_for_each_safe(a, - b, c, d) S | - for_each_gfn_sp(a, c, d, b) S + for_each_gfn_sp(a, c, d) S | - for_each_gfn_indirect_valid_sp(a, c, d, b) S + for_each_gfn_indirect_valid_sp(a, c, d) S | for_each_host(a, - b, c) S | for_each_host_safe(a, - b, c, d) S | for_each_mesh_entry(a, - b, c, d) S ) ...+> [akpm@linux-foundation.org: drop bogus change from net/ipv4/raw.c] [akpm@linux-foundation.org: drop bogus hunk from net/ipv6/raw.c] [akpm@linux-foundation.org: checkpatch fixes] [akpm@linux-foundation.org: fix warnings] [akpm@linux-foudnation.org: redo intrusive kvm changes] Tested-by: Peter Senna Tschudin <peter.senna@gmail.com> Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Signed-off-by: Sasha Levin <sasha.levin@oracle.com> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Marcelo Tosatti <mtosatti@redhat.com> Cc: Gleb Natapov <gleb@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-21Merge tag 'driver-core-3.9-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core patches from Greg Kroah-Hartman: "Here is the big driver core merge for 3.9-rc1 There are two major series here, both of which touch lots of drivers all over the kernel, and will cause you some merge conflicts: - add a new function called devm_ioremap_resource() to properly be able to check return values. - remove CONFIG_EXPERIMENTAL Other than those patches, there's not much here, some minor fixes and updates" Fix up trivial conflicts * tag 'driver-core-3.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (221 commits) base: memory: fix soft/hard_offline_page permissions drivercore: Fix ordering between deferred_probe and exiting initcalls backlight: fix class_find_device() arguments TTY: mark tty_get_device call with the proper const values driver-core: constify data for class_find_device() firmware: Ignore abort check when no user-helper is used firmware: Reduce ifdef CONFIG_FW_LOADER_USER_HELPER firmware: Make user-mode helper optional firmware: Refactoring for splitting user-mode helper code Driver core: treat unregistered bus_types as having no devices watchdog: Convert to devm_ioremap_resource() thermal: Convert to devm_ioremap_resource() spi: Convert to devm_ioremap_resource() power: Convert to devm_ioremap_resource() mtd: Convert to devm_ioremap_resource() mmc: Convert to devm_ioremap_resource() mfd: Convert to devm_ioremap_resource() media: Convert to devm_ioremap_resource() iommu: Convert to devm_ioremap_resource() drm: Convert to devm_ioremap_resource() ...
2013-02-15ixgbe: Update DESC_NEEDED define to adjust for changes to MAX_SKB_FRAGSAlexander Duyck
Recent changes have made it so that MAX_SKB_FRAGS is now never less than 16. As a result we were seeing issues on systems with 64K pages as it would cause DESC_NEEDED to increase to 68, and we would need over 136 descriptors free before clean_tx_irq would wake the queue. This patch makes it so that DESC_NEEDED is always MAX_SKB_FRAGS + 4. This should prevent any possible deadlocks on the systems with 64K pages as we will now only require 42 descriptors to wake. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2013-02-15ixgbe: fix Tx timeouts with BQLEmil Tantilov
This patch makes sure that TXDCTL.WTHRESH is set to 1 when BQL is enabled and EITR is set to more than 100k interrupts per second to avoid Tx timeouts. Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2013-02-15ixgbe: implement SFF diagnostic monitoring via ethtoolAurélien Guillaume
This patch adds support for reading data from SFP+ modules over i2c. Signed-off-by: Aurélien Guillaume <footplus@gmail.com> Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2013-02-15ixgbe: cleanup error checking in ixgbe_identify_sfp_module_generic()Emil Tantilov
This patch replaces instances where a return code from i2c operations were checked against a list of error codes with a much simpler if ( status != 0 ) check. Some whitespace cleanups included. Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2013-02-15ixgbe: fix possible data corruption in read_i2c_byteEmil Tantilov
This patch makes sure that the SW lock is released after all i2c operations complete in the retry code path. Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2013-02-15ixgbe: Add support for set_channels ethtool operationAlexander Duyck
This change adds support for the ethtool set_channels operation. Since the ixgbe driver has to support DCB as well as the other modes the assumption I made here is that the number of channels in DCB modes refers to the number of queues per traffic class, not the number of queues total. CC: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2013-02-15ixgbe: Add support for displaying the number of Tx/Rx channelsAlexander Duyck
This patch adds support for the ethtool get_channels operation. Since the ixgbe driver has to support DCB as well as the other modes the assumption I made here is that the number of channels in DCB modes refers to the number of queues per traffic class, not the number of queues total. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Reviewed-by: John Fastabend <john.r.fastabend@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2013-02-15ixgbe: Make ixgbe_setup_tc usable even when DCB is not enabledAlexander Duyck
The ixgbe_setup_tc code is essentially the same code we need any time we have to update the number of queues. As such I am making it available always and just stripping the DCB specific bits out when DCB is disabled instead of stripping the entire function. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Reviewed-by: John Fastabend <john.r.fastabend@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2013-02-15ixgbe: Update ixgbe driver to use __netdev_pick_tx in ixgbe_select_queueAlexander Duyck
This change updates the ixgbe driver to use __netdev_pick_tx instead of the current logic it is using to select a queue. The main result of this change is that ixgbe can now fully support XPS, and in the case of non-FCoE enabled configs it means we don't need to have our own ndo_select_queue. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Reviewed-by: John Fastabend <john.r.fastabend@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2013-02-15ixgbe: Add function for setting XPS queue mappingAlexander Duyck
This change adds support for ixgbe to configure the XPS queue mapping on load. The result of this change is that on open we will now be resetting the number of Tx queues, and then setting the default configuration for XPS based on if ATR is enabled or disabled. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Reviewed-by: John Fastabend <john.r.fastabend@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2013-02-15ixgbe: Define FCoE and Flow director limits much sooner to allow for changesAlexander Duyck
Instead of adjusting the FCoE and Flow director limits based on the number of CPUs we can define them much sooner. This allows the user to come through later and adjust them once we have updated the code to support the set_channels ethtool operation. I am still allowing for FCoE and RSS queues to be separated if the number queues is less than the number of CPUs. This essentially treats the two groupings like they are two separate traffic classes. In addition I am changing the initialization to use the MAX_TX/RX_QUEUES defines instead of trying to compute the value as it will be possible in upcoming patches for the user to request the maximum number of queues. I have also updated things so that the upper limit on queues is exactly 63 instead of allowing it to go up to 64. The reason for this change is to address the fact thqt the driver only supports up to 63 queue vectors since the hardware supports 64 MSI-X vectors, but one must be reserved for "other" causes. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2013-02-15igb: increase timeout for ethtool offline self-testStefan Assmann
On several machines with i350 adapters the ethtool offline self-test sometimes fails. This happens because link auto negotiation may take longer than the timeout of 4 seconds. Increasing the timeout by 1 seconds resolves the issue. Output from a failing i350 offline self-test: while [ 1 ]; do ethtool -t eth2 offline; done The test result is PASS The test extra info: Register test (offline) 0 Eeprom test (offline) 0 Interrupt test (offline) 0 Loopback test (offline) 0 Link test (on/offline) 0 The test result is FAIL The test extra info: Register test (offline) 0 Eeprom test (offline) 0 Interrupt test (offline) 0 Loopback test (offline) 0 Link test (on/offline) 1 The test result is PASS The test extra info: Register test (offline) 0 Eeprom test (offline) 0 Interrupt test (offline) 0 Loopback test (offline) 0 Link test (on/offline) 0 Signed-off-by: Stefan Assmann <sassmann@kpanic.de> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2013-02-15igbvf: Make next_to_watch a pointer and adjust memory barriers to avoid racesAlexander Duyck
This change is meant to address several race issues that become possible because next_to_watch could possibly be set to a value that shows that the descriptor is done when it is not. In order to correct that we instead make next_to_watch a pointer that is set to NULL during cleanup, and set to the eop_desc after the descriptor rings have been written. To enforce proper ordering the next_to_watch pointer is not set until after a wmb writing the values to the last descriptor in a transmit. In order to guarantee that the descriptor is not read until after the eop_desc we use the read_barrier_depends which is only really necessary on the alpha architecture. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Acked-by: Greg Rose <gregory.v.rose@intel.com> Tested-by: Sibai Li <sibai.li@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2013-02-15e1000e: display a warning message when SmartSpeed worksKoki Sanagi
Current e1000e driver doesn't tell nothing when Link Speed is downgraded due to SmartSpeed. As a result, users suspect that there is something wrong with NIC. If the cause of it is SmartSpeed, there is no means to replace NIC. This patch make e1000e notify users that SmartSpeed worked. Signed-off-by: Koki Sanagi <sanagi.koki@jp.fujitsu.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2013-02-15e1000: fix whitespace issues and multi-line commentsJeff Kirsher
Fixes whitespace issues, such as lines exceeding 80 chars, needless blank lines and the use of spaces where tabs are needed. In addition, fix multi-line comments to align with the networking standard. Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com>
2013-02-15ixgbe: refactor initialization of feature flagsEmil Tantilov
This patch reshuffles the switch/case structure of the flag assignment to allow for the flags to be set for each MAC type separately. This is needed for new HW that does not have feature parity with older HW. Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Tested-by: Jack Morgan <jack.morgan@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2013-02-15igb: Refractoring function pointers in igb_get_invariants functionAkeem G. Abodunrin
This patch simplifies igb_get_invariants function by moving all implemented function pointers in this function to individual separate functions, based on their functionalities, this would make debugging much easier. Signed-off-by: Akeem G Abodunrin <akeem.g.abodunrin@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2013-02-15igb: Intialize MAC function pointersAkeem G. Abodunrin
This patch initializes MAC function pointers for device configuration. Signed-off-by: Akeem G Abodunrin <akeem.g.abodunrin@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2013-02-15igb: Initialize NVM function pointersAkeem G. Abodunrin
This patch initializes NVM function pointers for device configuration. Signed-off-by: Akeem G Abodunrin <akeem.g.abodunrin@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2013-02-15igb: Initialize PHY function pointersAkeem G. Abodunrin
This patch initializes PHY function pointers for device configuration. Signed-off-by: Akeem G Abodunrin <akeem.g.abodunrin@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2013-02-15igb: Update igb to use a path similar to ixgbe to determine when to stop TxAlexander Duyck
After reviewing the igb and ixgbe code I realized there are a few issues in how the code is structured. Specifically we are not checking the size of the buffers being used in transmits and we are not using the same value to determine when to stop or start a Tx queue. As such the code is prone to be buggy. This patch makes it so that we have one value DESC_NEEDED that we will use for starting and stopping the queue. In addition we will check the size of buffers being used when setting up a transmit so as to avoid a possible buffer overrun if we were to receive a frame with a block of data larger than 32K in skb->data. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2013-02-15igb: Refix sparse warning in igb_get_i2c_clientCarolyn Wyborny
This patch correctly resolves the sparse warnings found with this function. Signed-off-by: Carolyn Wyborny <carolyn.wyborny@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2013-02-15igb: Fix for improper allocation flag in igb_get_i2c_clientCarolyn Wyborny
This patch fixes the allocation function in igb_get_i2c_client to use GFP_ATOMIC instead of GFP_KERNEL because we have a spinlock. Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Carolyn Wyborny <carolyn.wyborny@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2013-02-15igb: Fix for improper exit in igb_get_i2c_clientCarolyn Wyborny
This patch fixes an issue where we check for irq's disabled then exit after explicitly disabling them with spin_lock_irqsave. Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Carolyn Wyborny <carolyn.wyborny@intel.com> Tested-by: Aaron Brown <arron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2013-02-15igb: Support using build_skb in the case that jumbo frames are disabledAlexander Duyck
This change makes it so that we can enable the use of build_skb for cases where jumbo frames are disabled. The advantage to this is that we do not have to perform a memcpy to populate the header and as a result we see a significant performance improvement. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2013-02-13bridge: Add vlan support to static neighborsVlad Yasevich
When a user adds bridge neighbors, allow him to specify VLAN id. If the VLAN id is not specified, the neighbor will be added for VLANs currently in the ports filter list. If no VLANs are configured on the port, we use vlan 0 and only add 1 entry. Signed-off-by: Vlad Yasevich <vyasevic@redhat.com> Acked-by: Jitendra Kalsaria <jitendra.kalsaria@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-02-13bridge: Dump vlan information from a bridge portVlad Yasevich
Using the RTM_GETLINK dump the vlan filter list of a given bridge port. The information depends on setting the filter flag similar to how nic VF info is dumped. Signed-off-by: Vlad Yasevich <vyasevic@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-02-12Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Conflicts: drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c The bnx2x gso_type setting bug fix in 'net' conflicted with changes in 'net-next' that broke the gso_* setting logic out into a seperate function, which also fixes the bug in question. Thus, use the 'net-next' version. Signed-off-by: David S. Miller <davem@davemloft.net>
2013-02-12ixgbe: Only set gso_type to SKB_GSO_TCPV4 as RSC does not support IPv6Alexander Duyck
The original fix that was applied for setting gso_type required more change than necessary because it was assumed ixgbe does RSC on IPv6 frames and this is not correct. RSC is only supported with IPv4/TCP frames only. As such we can simplify the fix and avoid the unnecessary move of eth_type_trans. The previous patch "ixgbe: fix gso type" and this patch reduce the entire fix to one line that sets gso_type to TCPV4 if the frame is RSC. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.25.1) at 2024-07-07 23:23:35 +0000