aboutsummaryrefslogtreecommitdiff
path: root/drivers/net/ethernet
AgeCommit message (Collapse)Author
2013-06-25net/tg3: Avoid delay during MMIO accessGavin Shan
When the EEH error is the result of a fenced host bridge, MMIO accesses can be very slow (milliseconds) to timeout and return all 1's, thus causing the driver various timeout loops to take way too long and trigger soft-lockup warnings (in addition to taking minutes to recover). It might be worthwhile to check if for any of these cases, ffffffff is a valid possible value, and if not, bail early since that means the HW is either gone or isolated. In the meantime, checking that the PCI channel is offline would be workaround of the problem. Cc: <stable@vger.kernel.org> # v3.0+ Signed-off-by: Gavin Shan <shangw@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-24qlcnic: Do not sleep while holding spinlockShahed Shaikh
This patch reverts commit a4791254b6625b06aa33e36304f6e8a1a4a1fdea ("qlcnic: change mdelay to msleep") which overwrote a commit 68b3f28c11bf896be32ad2a2e151aaa5f4a7c98e ("qlcnic: Fix scheduling while atomic bug") Signed-off-by: Shahed Shaikh <shahed.shaikh@qlogic.com> Signed-off-by: Jitendra Kalsaria <jitendra.kalsaria@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-24drivers: net: cpsw: fix compilation error with cpsw driverMugunthan V N
drivers/net/ethernet/ti/cpsw.c: In function 'cpsw_suspend': drivers/net/ethernet/ti/cpsw.c:1979:26: error: 'priv' undeclared (first use in this function) drivers/net/ethernet/ti/cpsw.c:1979:26: note: each undeclared identifier is reported only once for each function it appears in make[4]: *** [drivers/net/ethernet/ti/cpsw.o] Error 1 The compilation error was introduced by the following commit 6d3d76f (drivers: net: cpsw: fix cpsw clock gating issue across suspend/resume) Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-24sh_eth: fix misreporting of transmit abortSergei Shtylyov
Due to obviously missing braces, EESR.TABT (transmit abort) interrupt may be reported even if it hasn't happened, just when EESR.TWB (transmit descriptor write-back) interrupt happens. Luckily (?), EESR.TWB is disabled by the driver via the TRIMD register and all the interrupt masks, so that transmit abort is never actually logged... Put the braces where they should be and fix the incoherent comment, while at it. Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-24sh_eth: fix unhandled RFE interruptSergei Shtylyov
EESR.RFE (receive FIFO overflow) interrupt is enabled by the driver on all SoCs and sh_eth_error() handles it but it's not present in any initializer/assignment of the 'eesr_err_check' field of 'struct sh_eth_cpu_data'. This leads to that interrupt not being handled and cleared, and finally to disabling IRQ and the driver being non-functional. Modify DEFAULT_EESR_ERR_CHECK macro and all explicit initializers of the above mentioned field to contain the EESR.RFE bit. Remove useless backslashes from the initializers, while at it. Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-24net: eth: davicnci_cpdma: check dma map errorSebastian Siewior
Since the DMA mapping may fail the caller should check the return value. Cc: Mugunthan V N <mugunthanvnm@ti.com> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-24net/mlx_en: Timestamping is not supported in slave modeAmir Vadai
Old hypervisors don't mask out timestamp capability for slave. Till slave support will be added, need to disable capability by slave. Signed-off-by: Amir Vadai <amirv@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-19mv643xx_eth: Allocate receive queue initialized to zeroLubomir Rintel
Zero pointer in rx_skb is how respective rxq_deinit() finds out out that a skb slot is unallocated. If rxq_refill() fails (e.g. on OOM condition), subsequent teardown would result in an attempt to kfree() invalid pointers. Signed-off-by: Lubomir Rintel <lkundrak@v3.sk> Cc: Lennert Buytenhek <buytenh@wantstofly.org> Cc: netdev@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-19pxa168_eth: Allocate receive queue initialized to zeroLubomir Rintel
Zero pointer in rx_skb or tx_skb is how respective *_deinit() functions find out that a skb slot is unallocated. If *_init() functions unsuccessfully return after the allocation (e.g. when subsequent dma_alloc_coherent() is not successful), this would result in attempt to kfree() invalid pointers. Signed-off-by: Lubomir Rintel <lkundrak@v3.sk> Cc: Kosta Zertsekel <konszert@marvell.com> Cc: netdev@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-19sfc: Remove write permission from phy_type attributeBen Hutchings
Driver probe currently results in: WARNING: at drivers/base/core.c:576 device_create_file+0x57/0x7e() Attribute phy_type: write permission without 'store' Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-19netdev: octeon_mgmt: Fix structure layout for little-endian.David Daney
The C ABI reverses the bitfield fill order when compiled as little-endian. Signed-off-by: David Daney <david.daney@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-19netdev: octeon_mgmt: Correct tx IFG workaround.David Daney
The previous fix was still too agressive to meet ieee specs. Increase to (14, 10). Signed-off-by: David Daney <david.daney@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-19stmmac: fix EEE setupGiuseppe CAVALLARO
This patch fixes the EEE setup allowing to configure this support when the link changes. Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-19drivers: net: cpsw: fix cpsw clock gating issue across suspend/resumeMugunthan V N
Due to some hardware integration issue, CPSW sliver modules requires a reset across suspend/resume cycle for a successful clock gating to CPGMAC (CPSW and Davinci MDIO) in AM335x PG1.0. This issue is fixed in PG2.x, though to support suspend/resume on PG1.0 this reset is required. Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-19net: fec: Fix build for MCF5272Guenter Roeck
Commits 4c09eed9 (net: fec: Enable imx6 enet checksum acceleration) and baa70a5c (net: fec: enable pause frame to improve rx prefomance for 1G network) introduced functionality into the FEC driver which is not supported on MCF5272. The registers used to implement this functionality do not exist on MCF5272. Since register defines for MCF5272 are separate from register defines for other chips, building images for MCF5272 fails as follows. fec_main.c: In function 'fec_restart': fec_main.c:520:8: error: 'FEC_RACC' undeclared (first use in this function) fec_main.c:585:3: error: 'FEC_R_FIFO_RSEM' undeclared (first use in this function) fec_main.c:586:3: error: 'FEC_R_FIFO_RSFL' undeclared (first use in this function) fec_main.c:587:3: error: 'FEC_R_FIFO_RAEM' undeclared (first use in this function) fec_main.c:588:3: error: 'FEC_R_FIFO_RAFL' undeclared (first use in this function) fec_main.c:591:3: error: 'FEC_OPD' undeclared (first use in this function) Adding the missing register defines is not an option, since the registers do not exist on MCF5272. Disable the added functionality for MCF5272 builds. Cc: Frank Li <Frank.Li@freescale.com> Cc: Jim Baxter <jim_baxter@mentor.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-17net: cpsw: check for cpts pointer after its allocationSebastian Siewior
after priv->cpts got allocated then this pointer should check to determine if the allocation succeeded or not. Cc: Mugunthan V N <mugunthanvnm@ti.com> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-17alx: add a simple AR816x/AR817x device driverJohannes Berg
This is a very simple driver, based on the original vendor driver that Qualcomm/Atheros published/submitted previously, but reworked to make the code saner. However, it also lost a number of features (TSO/GSO, VLAN acceleration and multi- queue support) in the process, as well as debugging support features I didn't have any use for. The only thing I left is checksum offload. More features can obviously be added, but this seemed like a good start for having a driver in mainline at all. Johannes Stezenbach has verified that the driver works on AR8161, I have a AR8171 myself. The E2200 device ID I found on github in somebody's repository. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-16lseek(fd, n, SEEK_END) does *not* go to eof - nAl Viro
When you copy some code, you are supposed to read it. If nothing else, there's a chance to spot and fix an obvious bug instead of sharing it... X-Song: "I Got It From Agnes", by Tom Lehrer Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> [ Tom Lehrer? You're dating yourself, Al ] Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-06-13tulip: Properly check dma mapping resultNeil Horman
Tulip throws an error when dma debugging is enabled, as it doesn't properly check dma mapping results with dma_mapping_error() durring tx ring refills. Easy fix, just add it in, and drop the frame if the mapping is bad Signed-off-by: Neil Horman <nhorman@tuxdriver.com> CC: Grant Grundler <grundler@parisc-linux.org> CC: "David S. Miller" <davem@davemloft.net> Reviewed-by: Grant Grundler <grundler@parisc-linux.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-13net: sh_eth: fix incorrect RX length error if R8A7740Yoshihiro Shimoda
This patch fixes an issue that the driver increments the "RX length error" on every buffer in sh_eth_rx() if the R8A7740. This patch also adds a description about the Receive Frame Status bits. Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-13drivers: net: davinci_mdio: restore mdio clk divider in mdio resumeMugunthan V N
During suspend resume cycle all the register data is lost, so MDIO clock divier value gets reset. This patch restores the clock divider value. Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-13drivers: net: davinci_mdio: moving mdio resume earlier than cpsw ethernet driverMugunthan V N
MDIO driver should resume before CPSW ethernet driver so that CPSW connect to the phy and start tx/rx ethernet packets, changing the suspend/resume apis with suspend_late/resume_early. Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-13tg3: Wait for boot code to finish after power onNithin Sujir
Some systems that don't need wake-on-lan may choose to power down the chip on system standby. Upon resume, the power on causes the boot code to startup and initialize the hardware. On one new platform, this is causing the device to go into a bad state due to a race between the driver and boot code, once every several hundred resumes. The same race exists on open since we come up from a power on. This patch adds a wait for boot code signature at the beginning of tg3_init_hw() which is common to both cases. If there has not been a power-off or the boot code has already completed, the signature will be present and poll_fw() returns immediately. Also return immediately if the device does not have firmware. Cc: stable@vger.kernel.org Signed-off-by: Nithin Nayak Sujir <nsujir@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-13net: ethernet: stmicro: stmmac: Fix compile error when STMMAC_XMIT_DEBUG usedDinh Nguyen
drivers/net/ethernet/stmicro/stmmac/stmmac_main.c: In function: stmmac_xmit drivers/net/ethernet/stmicro/stmmac/stmmac_main.c:1902:74: error: expected ) before __func__ Signed-off-by: Dinh Nguyen <dinguyen@altera.com> Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com> CC: David S. Miller <davem@davemloft.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-13be2net: Fix 32-bit DMA Mask handlingSomnath Kotur
Fix to set the coherent DMA mask only if dma_set_mask() succeeded, and to error out if either fails. Signed-off-by: Somnath Kotur <somnath.kotur@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-11sh_eth: fix result of sh_eth_check_reset() on timeoutSergei Shtylyov
When the first loop in sh_eth_check_reset() runs to its end, 'cnt' is 0, so the following check for 'cnt < 0' fails to catch the timeout. Fix the condition in this check, so that the timeout is actually reported. While at it, fix the grammar in the failure message... Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-11net/ti davinci_mdio: don't hold a spin lock while calling pm_runtimeSebastian Siewior
was playing with suspend and run into this: |BUG: sleeping function called from invalid context at drivers/base/power/runtime.c:891 |in_atomic(): 1, irqs_disabled(): 0, pid: 1963, name: bash |6 locks held by bash/1963: |CPU: 0 PID: 1963 Comm: bash Not tainted 3.10.0-rc4+ #50 |[<c0014fdc>] (unwind_backtrace+0x0/0xf8) from [<c0011da4>] (show_stack+0x10/0x14) |[<c0011da4>] (show_stack+0x10/0x14) from [<c02e8680>] (__pm_runtime_idle+0xa4/0xac) |[<c02e8680>] (__pm_runtime_idle+0xa4/0xac) from [<c0341158>] (davinci_mdio_suspend+0x6c/0x9c) |[<c0341158>] (davinci_mdio_suspend+0x6c/0x9c) from [<c02e0628>] (platform_pm_suspend+0x2c/0x54) |[<c02e0628>] (platform_pm_suspend+0x2c/0x54) from [<c02e52bc>] (dpm_run_callback.isra.3+0x2c/0x64) |[<c02e52bc>] (dpm_run_callback.isra.3+0x2c/0x64) from [<c02e57e4>] (__device_suspend+0x100/0x22c) |[<c02e57e4>] (__device_suspend+0x100/0x22c) from [<c02e67e8>] (dpm_suspend+0x68/0x230) |[<c02e67e8>] (dpm_suspend+0x68/0x230) from [<c0072a20>] (suspend_devices_and_enter+0x68/0x350) |[<c0072a20>] (suspend_devices_and_enter+0x68/0x350) from [<c0072f18>] (pm_suspend+0x210/0x24c) |[<c0072f18>] (pm_suspend+0x210/0x24c) from [<c0071c74>] (state_store+0x6c/0xbc) |[<c0071c74>] (state_store+0x6c/0xbc) from [<c02714dc>] (kobj_attr_store+0x14/0x20) |[<c02714dc>] (kobj_attr_store+0x14/0x20) from [<c01341a0>] (sysfs_write_file+0x16c/0x19c) |[<c01341a0>] (sysfs_write_file+0x16c/0x19c) from [<c00ddfe4>] (vfs_write+0xb4/0x190) |[<c00ddfe4>] (vfs_write+0xb4/0x190) from [<c00de3a4>] (SyS_write+0x3c/0x70) |[<c00de3a4>] (SyS_write+0x3c/0x70) from [<c000e2c0>] (ret_fast_syscall+0x0/0x48) I don't see a reason why the pm_runtime call must be under the lock. Further I don't understand why this is a spinlock and not mutex. Cc: Mugunthan V N <mugunthanvnm@ti.com> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Acked-by: Mugunthan V N <mugunthanvnm@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-04tg3: Add read dma workaround for 5720Nithin Sujir
Commit 091f0ea30074bc43f9250961b3247af713024bc6 "tg3: Add New 5719 Read DMA workaround" added a workaround for TX DMA stall on the 5719. This workaround needs to be applied to the 5720 as well. Cc: stable@vger.kernel.org Reported-by: Roland Dreier <roland@purestorage.com> Tested-by: Roland Dreier <roland@purestorage.com> Signed-off-by: Nithin Nayak Sujir <nsujir@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-04net: ethernet: xilinx_emaclite: set protocol selector bits when writing ANARJens Renner \(EFE\)
This patch sets the protocol selector bits (4:0) of the PHY's MII_ADVERTISE register (ANAR) when writing ADVERTISE_ALL. The protocol selector bits are indicating IEEE 803.3u support and are fixed / read-only on some PHYs. Not setting them correctly on others (like TI DP83630) makes the PHY fall back to 10M HDX mode which should be avoided. Tested for TI DP83630 PHY on Microblaze platform. Signed-off-by: Jens Renner <renner@efe-gmbh.de> Tested-by: Michal Simek <monstr@monstr.eu> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-04bnx2x: Fix bridged GSO for 57710/57711 chipsYuval Mintz
It was recently found out that GSO on 57710/57711 was broken, due to packets being sent without a valid IP checksum. Commit 057cf65 "bnx2x: Fix GSO for 57710/57711 chips" partially fixed this issue, but failed to set the correct IP checksum when receiving GSO packets via bridges, as such packets enter bnx2x_tx_split() and the FW flags needed to calculate IP checksum were erroneously set in the incorrect buffer descriptor. This patch re-enables GSO in said scenario for 57710/57711 chips. Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com> Signed-off-by: Ariel Elior <ariele@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-04net: fec: add fallback to random MAC addressLucas Stach
If no valid MAC address could be obtained from the hardware, fall back to a randomly generated one. Signed-off-by: Pavel Machek <pavel@denx.de> Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-04bnx2x: fix TCP offload for tunneling ipv4 over ipv6Dmitry Kravkov
FW was initialized with data from wrong header, this caused TSO packets have wrong IP csum. Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: Ariel Elior <ariele@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-04net/mlx4_core: Keep VF assigned MAC in the PF admin tableOr Gerlitz
MAC addresses assigned by the PF to VFs were not kept in the PF driver admin table. As a result, displaying the VF MACs from the PF interface to user space showed zero address where in fact the VF got non-zero address from the PF, fix that. Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-04net/mlx4_en: Handle unassigned VF MAC address correctlyOr Gerlitz
When a VF sense they didn't get MAC address, use random one. This will address the case of administrator not assigning MAC to the VF through the PF OS APIs and keep udev happy. Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-04net/mlx4_core: Return -EPROBE_DEFER when a VF is probed before PF is ↵Jack Morgenstein
sufficiently initialized In the PF initialization, SRIOV is enabled before the PF is fully initialized. This allows the kernel to probe the newly-exposed VFs before the PF is ready to handle them (nested probes). Have the probe method return the -EPROBE_DEFER value in this situation (instead of the VF probe method retrying its initialization in a loop, and returning -EIO on failure). When -EPROBE_DEFER is returned by the VF probe method, the kernel itself will retry the probe after a suitable delay. Based upon a suggestion by Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-04net/mlx4_en: Fix adaptive moderation cq updateSagi Grimberg
When turning on adaptive_rx under adaptive moderation, the CQ's moderation count wasn't updated according to rx_frames which resulted in too many interrupts and bandwidth drop. Signed-off-by: Sagi Grimberg <sagig@mellanox.com> Signed-off-by: Amir Vadai <amirv@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-05-30be2net: Fix crash on 2nd invocation of PCI AER/EEH error_detected hookSomnath Kotur
During a PCI EEH/AER error recovery flow, if the device did not successfully restart, the error_detected() hook may be called a second time with a "perm_failure" state. This patch skips over driver cleanup for the second invocation of the callback. Also, Lancer error recovery code is fixed-up to handle these changes. Signed-off-by: Kalesh AP <kalesh.purayil@emulex.com> Signed-off-by: Somnath kotur <somnath.kotur@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-05-30be2net: Mark checksum fail for IP fragmented packetsSomnath Kotur
HW does not compute L4 checksum for IP Fragmented packets. Signed-off-by: Kalesh AP <kalesh.purayil@emulex.com> Signed-off-by: Somnath Kotur <somnath.kotur@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-05-25qlge: add missing free_netdev() on error in qlge_probe()Wei Yongjun
Add the missing free_netdev() before return from function qlge_probe() in the error handling case. Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Acked-by: Jitendra Kalsaria <jitendra.kalsaria@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-05-24Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds
Pull networking fixes from David Miller: "It's been a while since my last pull request so quite a few fixes have piled up." Indeed. 1) Fix nf_{log,queue} compilation with PROC_FS disabled, from Pablo Neira Ayuso. 2) Fix data corruption on some tg3 chips with TSO enabled, from Michael Chan. 3) Fix double insertion of VLAN tags in be2net driver, from Sarveshwar Bandi. 4) Don't have TCP's MD5 support pass > PAGE_SIZE page offsets in scatter-gather entries into the crypto layer, the crypto layer can't handle that. From Eric Dumazet. 5) Fix lockdep splat in 802.1Q MRP code, also from Eric Dumazet. 6) Fix OOPS in netfilter log module when called from conntrack, from Hans Schillstrom. 7) FEC driver needs to use netif_tx_{lock,unlock}_bh() rather than the non-BH disabling variants. From Fabio Estevam. 8) TCP GSO can generate out-of-order packets, fix from Eric Dumazet. 9) vxlan driver doesn't update 'used' field of fdb entries when it should, from Sridhar Samudrala. 10) ipv6 should use kzalloc() to allocate inet6 socket cork options, otherwise we can OOPS in ip6_cork_release(). From Eric Dumazet. 11) Fix races in bonding set mode, from Nikolay Aleksandrov. 12) Fix checksum generation regression added by "r8169: fix 8168evl frame padding.", from Francois Romieu. 13) ip_gre can look at stale SKB data pointer, fix from Eric Dumazet. 14) Fix checksum handling when GSO is enabled in bnx2x driver with certain chips, from Yuval Mintz. 15) Fix double free in batman-adv, from Martin Hundebøll. 16) Fix device startup synchronization with firmware in tg3 driver, from Nithin Sujit. 17) perf networking dropmonitor doesn't work at all due to mixed up trace parameter ordering, from Ben Hutchings. 18) Fix proportional rate reduction handling in tcp_ack(), from Nandita Dukkipati. 19) IPSEC layer doesn't return an error when a valid state is detected, causing an OOPS. Fix from Timo Teräs. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (85 commits) be2net: bug fix on returning an invalid nic descriptor tcp: xps: fix reordering issues net: Revert unused variable changes. xfrm: properly handle invalid states as an error virtio_net: enable napi for all possible queues during open tcp: bug fix in proportional rate reduction. net: ethernet: sun: drop unused variable net: ethernet: korina: drop unused variable net: ethernet: apple: drop unused variable qmi_wwan: Added support for Cinterion's PLxx WWAN Interface perf: net_dropmonitor: Remove progress indicator perf: net_dropmonitor: Use bisection in symbol lookup perf: net_dropmonitor: Do not assume ordering of dictionaries perf: net_dropmonitor: Fix symbol-relative addresses perf: net_dropmonitor: Fix trace parameter order net: fec: use a more proper compatible string for MVF type device qlcnic: Fix updating netdev->features qlcnic: remove netdev->trans_start updates within the driver qlcnic: Return proper error codes from probe failure paths tg3: Update version to 3.132 ...
2013-05-23be2net: bug fix on returning an invalid nic descriptorWei Yang
In function be_get_nic_desc(), it will go through the descriptor array returned from f/w. By comparing the desc_type field, it determines whether there is a nic descriptor in the array or not. In the case of no nic descriptor, this function should return NULL. The code may return an invalide descriptor, when there is no nic descriptor in the array and the desc_count is less than MAX_RESOURCE_DESC. In this case, even there is no nic descriptor, it will still return the lase descriptor since the i doesn't equal to MAX_RESOURCE_DESC. This patch fix this issue by returning the descriptor when find it and return NULL for other cases. Signed-off-by: Wei Yang <weiyang@linux.vnet.ibm.com> Reviewed-by: Gavin Shan <shangw@linux.vnet.ibm.com> Reviewed-by: Xiao Guangrong <xiaoguangrong@linux.vnet.ibm.com> Acked-by: Sathya Perla <sathya.perla@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-05-23net: Revert unused variable changes.David S. Miller
This reverts commits: c573972c111eb4c6b3f3250ad71e7c75cc799833 1a5904342c7380ceddd61c0b37544d752d0b1433 da2e2c214953f37c2a6be20226537ca5a329724c They were meant for net-next not net. Signed-off-by: David S. Miller <davem@davemloft.net>
2013-05-22net: ethernet: sun: drop unused variableEmilio López
Commit bfd428d ("net: ethernet: sun: initialize variables directly") dropped the only loop that was using i but did not remove the actual variable, therefore causing a warning when building. This patch drops the now redundant line. Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Emilio López <emilio@elopez.com.ar> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-05-22net: ethernet: korina: drop unused variableEmilio López
Commit e998fd4 ("net: ethernet: korina: initialize variables directly") dropped the only loop that was using i but did not remove the actual variable, therefore causing a warning when building. This patch drops the now redundant line. Signed-off-by: Emilio López <emilio@elopez.com.ar> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-05-22net: ethernet: apple: drop unused variableEmilio López
Commit 3b0aaef ("net: ethernet: apple: initialize variables directly") dropped the only loop that was using i but did not remove the actual variable, therefore causing a warning when building. This patch drops the now redundant line. Signed-off-by: Emilio López <emilio@elopez.com.ar> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-05-22net: fec: use a more proper compatible string for MVF type deviceShawn Guo
MVF is a family while MVF600 is a particular SoC in the family. We generally prefer to use SoC rather than family name in compatible string to define a particular type of fec device. And this is how fec_dt_ids works for all those IMX fec variants. Let's change mvf to mvf600 to have it work in the same way. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-05-22qlcnic: Fix updating netdev->featuresShahed Shaikh
o After change in EPORT features of 82xx adapter, netdev->features needs to be updated to reflect EPORT feature updates but driver was manipulating netdev->features at wrong place. o This patch uses netdev_update_features() and .ndo_fix_features() to update netdev->features properly. Signed-off-by: Shahed Shaikh <shahed.shaikh@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-05-22qlcnic: remove netdev->trans_start updates within the driverSony Chacko
Code is removed because netdev->trans_start updates made by the driver will be ignored by the kernel. Signed-off-by: Sony Chacko <sony.chacko@qlogic.com> Signed-off-by: Shahed Shaikh <shahed.shaikh@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-05-22qlcnic: Return proper error codes from probe failure pathsSony Chacko
Fix error paths in probe to assign proper error codes to probe return value. Signed-off-by: Sony Chacko <sony.chacko@qlogic.com> Signed-off-by: Shahed Shaikh <shahed.shaikh@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-05-22tg3: Update version to 3.132Nithin Sujir
Signed-off-by: Nithin Nayak Sujir <nsujir@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.25.1) at 2024-06-05 01:04:28 +0000