aboutsummaryrefslogtreecommitdiff
path: root/drivers/net/wireless/ath/ath9k/debug.h
AgeCommit message (Collapse)Author
2013-05-17ath9k: Fix crash on module unloadSujith Manoharan
Make sure that any open relayfs files are closed before unregistering with mac80211, otherwise this crash is seen: [ 1331.097846] BUG: unable to handle kernel paging request at 6b6b6b8b [ 1331.098170] IP: [<c063d0d6>] debugfs_remove+0x26/0x80 [ 1331.098170] *pdpt = 000000002f9aa001 *pde = 0000000000000000 [ 1331.098170] Oops: 0000 [#1] PREEMPT SMP [ 1331.098170] Modules linked in: iptable_raw xt_CT nf_conntrack_ipv4 nf_defrag] [ 1331.098170] Pid: 4794, comm: rmmod Tainted: G WC 3.9.1+ #5 To Be Fi. [ 1331.098170] EIP: 0060:[<c063d0d6>] EFLAGS: 00010202 CPU: 0 [ 1331.098170] EIP is at debugfs_remove+0x26/0x80 [ 1331.098170] EAX: f2f3acd0 EBX: f2f3acd0 ECX: 00000006 EDX: f8622348 [ 1331.098170] ESI: 6b6b6b6b EDI: 00000001 EBP: ee251e14 ESP: ee251e0c [ 1331.098170] DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068 [ 1331.098170] CR0: 8005003b CR2: 6b6b6b8b CR3: 2e7b7000 CR4: 000007e0 [ 1331.098170] DR0: 00000000 DR1: 00000000 DR2: 00000000 DR3: 00000000 [ 1331.098170] DR6: ffff0ff0 DR7: 00000400 [ 1331.098170] Process rmmod (pid: 4794, ti=ee250000 task=efaa2560 task.ti=ee25) [ 1331.098170] Stack: [ 1331.098170] f241e170 0000000a ee251e1c f861394d ee251e28 c04e3088 f241e170 4 [ 1331.098170] c04e30fe f45482b0 ee251e54 c04e3187 f25e86b0 ee251e54 f8618748 0 [ 1331.098170] 0000000a 00000001 ee251e68 f860065b f2509e20 f25085a0 f5b6e8a4 8 [ 1331.098170] Call Trace: [ 1331.098170] [<f861394d>] remove_buf_file_handler+0xd/0x20 [ath9k] [ 1331.098170] [<c04e3088>] relay_remove_buf+0x18/0x30 [ 1331.098170] [<c04e30fe>] relay_close_buf+0x2e/0x40 [ 1331.098170] [<c04e3187>] relay_close+0x77/0xf0 [ 1331.098170] [<f8618748>] ? dpd_exit+0x38/0x40 [ath9k] [ 1331.098170] [<f860065b>] ath9k_deinit_softc+0x8b/0xa0 [ath9k] [ 1331.098170] [<f86006b8>] ath9k_deinit_device+0x48/0x60 [ath9k] [ 1331.098170] [<f86107f1>] ath_pci_remove+0x31/0x50 [ath9k] [ 1331.098170] [<c06dbff8>] pci_device_remove+0x38/0xc0 [ 1331.098170] [<c079daa4>] __device_release_driver+0x64/0xc0 [ 1331.098170] [<c079db97>] driver_detach+0x97/0xa0 [ 1331.098170] [<c079cacc>] bus_remove_driver+0x6c/0xe0 [ 1331.098170] [<c079c197>] ? bus_put+0x17/0x20 [ 1331.098170] [<c079cae3>] ? bus_remove_driver+0x83/0xe0 [ 1331.098170] [<c079e709>] driver_unregister+0x49/0x80 [ 1331.098170] [<c06dc138>] pci_unregister_driver+0x18/0x80 [ 1331.098170] [<f8610602>] ath_pci_exit+0x12/0x20 [ath9k] [ 1331.098170] [<f8619ce0>] ath9k_exit+0x17/0x337 [ath9k] [ 1331.098170] [<c09e537d>] ? mutex_unlock+0xd/0x10 [ 1331.098170] [<c04bd36c>] sys_delete_module+0x17c/0x250 [ 1331.098170] [<c0540dc4>] ? do_munmap+0x244/0x2d0 [ 1331.098170] [<c0540e96>] ? vm_munmap+0x46/0x60 [ 1331.098170] [<c09e8dc4>] ? restore_all+0xf/0xf [ 1331.098170] [<c09ebf50>] ? __do_page_fault+0x4c0/0x4c0 [ 1331.098170] [<c04b18e4>] ? trace_hardirqs_on_caller+0xf4/0x180 [ 1331.098170] [<c09ef28d>] sysenter_do_call+0x12/0x38 [ 1331.098170] Code: 90 8d 74 26 00 55 89 e5 83 ec 08 89 1c 24 89 74 24 04 3e 82 [ 1331.098170] EIP: [<c063d0d6>] debugfs_remove+0x26/0x80 SS:ESP 0068:ee251e0c [ 1331.098170] CR2: 000000006b6b6b8b [ 1331.727971] ---[ end trace b5bb9f2066cef7f9 ]--- Cc: <stable@vger.kernel.org> Acked-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de> Tested-by: Ben Greear <greearb@candelatech.com> Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-03-06ath9k: Report txerr-filtered errors in debugfs.Ben Greear
Signed-off-by: Ben Greear <greearb@candelatech.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-01-30ath9k: drop spectral packets after processing themSimon Wunderlich
Spectral packets are "bogus" packets and should not be further evaluated by the RX path. Statistics are added to keep track of these packets. Signed-off-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de> Signed-off-by: Mathias Kretschmer <mathias.kretschmer@fokus.fraunhofer.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-01-28Merge branch 'master' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless Conflicts: drivers/net/wireless/ath/ath9k/main.c drivers/net/wireless/iwlwifi/dvm/tx.c
2013-01-11ath9k: add a better fix for the rx tasklet vs rx flush raceFelix Fietkau
Ensure that the rx tasklet is no longer running when entering the reset path. Also remove the distinction between flush and no-flush frame processing. If a frame has been received and ACKed by the hardware, the stack needs to see it, so that the BA receive window does not go out of sync. Cc: stable@vger.kernel.org Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-01-09ath9k: add spectral scan featureSimon Wunderlich
Adds the spectral scan feature for ath9k. AR92xx and AR93xx chips are supported for now. The spectral scan is triggered by configuring a mode through a debugfs control file. Samples can be gathered via another relay debugfs file. Essentially, to try it out: echo chanscan > /sys/kernel/debug/ieee80211/phy0/ath9k/spectral_scan_ctl iw dev wlan0 scan cat /sys/kernel/debug/ieee80211/phy0/ath9k/spectral_scan0 > samples echo disable > /sys/kernel/debug/ieee80211/phy0/ath9k/spectral_scan_ctl This feature is still experimental. The special "chanscan" mode is used to perform spectral scan while mac80211 is scanning for channels. To allow this, sw_scan_start/complete() ops have been added. The patch contains code snippets and information from Zefir Kurtisi and information provided by Adrian Chadd and Felix Fietkau. Signed-off-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de> Signed-off-by: Mathias Kretschmer <mathias.kretschmer@fokus.fraunhofer.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-12-10ath9k: Fix regression in 'xmit' debugfs fileSujith Manoharan
Commit "ath9k: Fix the 'xmit' debugfs file" changed the the array size of ath_stats.txstats to IEEE80211_NUM_ACS, which is wrong because the HW queue number is used to update the statistics. Revert back to using ATH9K_NUM_TX_QUEUES. Reported-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-11-30ath9k: Implement sta_add_debugfs/sta_remove_debugfsSujith Manoharan
Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-11-30ath9k: Move ethtool functions to debug.cSujith Manoharan
The ethtool statistics are available only when CONFIG_ATH9K_DEBUGFS is enabled, move these functions to debug.c Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-11-21ath9k: Fix the 'xmit' debugfs fileSujith Manoharan
The 'xmit' debugfs file has become big and unwieldy, fix multiple issues with its usage: * Store TX counters/statistics only for the 4 Access Categories. Use IEEE80211_NUM_ACS instead of ATH9K_NUM_TX_QUEUES. * Move various utility macros to debug.h, they can be reused elsewhere. * Remove tx_complete_poll_work_seen. * Remove code that accesses various internal queue-specific variables without any locking whatsoever. HW/SW queue details will be handled in a subsequent patch. * Do not print internal values like txq_headidx and txq_headidx. They were mostly unused anyway, considering code like: PRX("txq_tailidx: ", txq_headidx); * Handle 'txprocdesc' for EDMA too. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-11-21ath9k: Fix MCI reset in BT cal_reqRajkumar Manoharan
This patch reverts the commit "ath9k_hw: Wait BT calibration to complete" and bail out from MCI interrupt routine for chip reset. The above commit stalls the WLAN TCP traffic while bringing up and down the BT interface iteratively. Fixing this properly by queueing up chip reset and bailing out properly from tasklet routine. Signed-off-by: Rajkumar Manoharan <rmanohar@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-09-11ath9k_hw: Wait BT calibration to completeRajkumar Manoharan
Whenever BT calibration requested, WLAN has to wait for the calibration to be completed. But right now we defer the waiting which might cause BT calibration to fail. Fix that. Signed-off-by: Rajkumar Manoharan <rmanohar@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-09-11ath9k: Add Generic hardware timer interrupt in debugfsMohammed Shafi Shajakhan
Having generic hardware timer interrupt in debugfs would come handy when we are debugging 3 WIRE BTCOEX issues. Signed-off-by: Mohammed Shafi Shajakhan <mohammed@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-07-17ath9k: Fix race in reset-work usageRajkumar Manoharan
Using work_pending() to defer certain operations when a HW-reset work has been queued is racy since the check would return false when the work item is actually in execution. Use SC_OP_HW_RESET instead to fix this race. Also, unify the reset debug statistics maintenance. Signed-off-by: Rajkumar Manoharan <rmanohar@qca.qualcomm.com> Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-06-06ath9k: Add MCI interrupt to debugfs statisticsSujith Manoharan
Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-04-16ath9k: Gather and report IRQ sync_cause errors.Ben Greear
Report all defined sync_cause errors in debugfs to aid with debugging. Use a macro to print out the interrupts file contents to decrease code duplication. Signed-off-by: Ben Greear <greearb@candelatech.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-04-11ath9k: Add more recv stats.Ben Greear
This adds counters in various places that can drop packets on rx without otherwise incrementing a counter. It also counts some non-error cases, such as becons and fragments received. Should help with figuring out where packets are (and are not) dropped. Signed-off-by: Ben Greear <greearb@candelatech.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-04-11ath9k: Add tx-failed counter.Ben Greear
This counts any failure during getting packets into the DMA buffers, including out-of-memory, etc. Signed-off-by: Ben Greear <greearb@candelatech.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-04-09ath9k: recover ar9380 chips from rare stuck stateRajkumar Manoharan
In the experiment with Azimuth ADEPT-n testbed where the APs transmit power was reduced to 25% and the signal strength was futher attenuated by 20dB and induced a path loss of ~7dB, the station was reporting beacon losses and the following issue were observed. * rx clear is stuck at low for more than 300ms * dcu chain and complete state is stuck at one of the hang signature This patch triggers the hang detection logic that recovers the chip from any of the above conditions. As the issue was originally reported in ChromeOs with AR9382 chips, this detection logic is enabled only for AR9380/2 chips. Cc: Paul Stewart <pstew@google.com> Reported-by: Gary Morain <gmorain@google.com> Signed-off-by: Rajkumar Manoharan <rmanohar@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-03-07ath9k: remove rssi/antenna information from recv debug statsFelix Fietkau
The way this is implemented (simply storing the last value) is absolutely worthless for debugging anything, and the same information is also available through the MAC sample feature, so there's no point in keeping this around. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-03-07ath9k: make MAC sample statistics optionalFelix Fietkau
They're more expensive than some of the other debug options and only used in very rare situations, so it sometimes makes sense to disable them while leaving in debugfs support. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-12-15ath9k: add DFS radar pulse processingZefir Kurtisi
This initial DFS module provides basic functionality to deal with radar pulses reported by the Atheros DFS HW pulse detector. The reported data is evaluated and basic plausibility checks are performed to filter false pulses. Passing radar pulses are forwarded to pattern detectors which are not yet implemented. (Some modifications to actually use ATH9K_DFS_DEBUGFS based on comments from Julian Calaby <julian.calaby@gmail.com>. -- JWL) Signed-off-by: Zefir Kurtisi <zefir.kurtisi@neratec.com> Signed-off-by: Luis R. Rodriguez <mcgrof@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-10-11ath9k: keep track of what's triggering hardware resetsFelix Fietkau
Export how many times each of the reset triggers has fired through debugfs. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-09-27ath9k: add Block ACK bitmap in sample debugMohammed Shafi Shajakhan
this represents the bitmap of block ACK received after the successful transmission of an aggregate frame. also made few changes to beautify the display Signed-off-by: Mohammed Shafi Shajakhan <mohammed@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-09-16ath9k: remove ATH_TX_XRETRY and BUF_XRETRY flagsFelix Fietkau
Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-08-29ath9k: Add debugfs support for mac/baseband samplesRajkumar Manoharan
This patch keep track of number of samples that includes DMA debugs registers, PCU observe, CR, channel noise, cycle conters, noisefloor history buffer and last N number of tx and rx descriptor status. These samples are grouped in table manner which dumping in debgufs. Debugfs file location: <debugfs_mnt>/ieee80211/phy#/ath9k/samples Signed-off-by: Rajkumar Manoharan <rmanohar@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-06-03ath9k: show excessive-retry MPDUs in debugfsFelix Fietkau
Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-05-19ath9k: Drag the driver to the year 2011Sujith Manoharan
The Times They Are a-Changin'. Signed-off-by: Sujith Manoharan <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-25ath9k: Add TSFOOR interrupt stats in debug infoMohammed Shafi Shajakhan
This helped the developers to fix an issue of chip not entering network sleep during idle state, previously this was only available as a debug message Signed-off-by: Mohammed Shafi Shajakhan <mshajakhan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-12ath9k: Add RSSI information from control and extension chainsSenthil Balasubramanian
Export RSSI information from all the control and extension channel chains to debugfs. Also add rx antenna information to debugfs. This will be useful for debugging purpose. Signed-off-by: Senthil Balasubramanian <senthilkumar@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-01-28ath9k: fix compile error in non-debug ath_debug_stat_tx() stubFelix Fietkau
"ath9k: fix tx queue index confusion in debugfs code" changed the debug function but not the stub. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-01-28ath9k: fix tx queue index confusion in debugfs codeFelix Fietkau
Various places printing tx queue information used various different ways to get a tx queue index for printing statistics. Most of these ways were wrong. ATH_TXQ_AC_* cannot be used as an index for sc->tx.txq, because it is only used internally for queue assignment. One place used WME_AC_* as a queue index for sc->debug.stats.txstats, however this array uses the ath9k_hw queue number as well. Fix all of this by always using the ath9k_hw queue number as an index, and always looking it up by going through sc->tx.txq_map. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Cc: Ben Greear <greearb@candelatech.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-01-21ath9k: Add counters to distinquish AMPDU enqueues.Ben Greear
Show counters for pkts sent directly to hardware and those queued in software. Signed-off-by: Ben Greear <greearb@candelatech.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-01-21ath9k: Add more information to debugfs xmit file.Ben Greear
Should help debug strange tx lockup type issues. Signed-off-by: Ben Greear <greearb@candelatech.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-12-02ath9k: Move debugfs under ieee80211/[phyname]/ath9k/Ben Greear
This fixes debugfs problems when a phy is renamed, and is able to remove a bit of code that is no longer needed. Signed-off-by: Ben Greear <greearb@candelatech.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-11-15ath9k: rework tx queue selection and fix queue stopping/wakingFelix Fietkau
The current ath9k tx queue handling code showed a few issues that could lead to locking issues, tx stalls due to stopped queues, and maybe even DMA issues. The main source of these issues is that in some places the queue is selected via skb queue mapping in places where this mapping may no longer be valid. One such place is when data frames are transmitted via the CAB queue (for powersave buffered frames). This is made even worse by a lookup WMM AC values from the assigned tx queue (which is undefined for the CAB queue). This messed up the pending frame counting, which in turn caused issues with queues getting stopped, but not woken again. To fix these issues, this patch removes an unnecessary abstraction separating a driver internal queue number from the skb queue number (not to be confused with the hardware queue number). It seems that this abstraction may have been necessary because of tx queue preinitialization from the initvals. This patch avoids breakage here by pushing the software <-> hardware queue mapping to the function that assigns the tx queues and redefining the WMM AC definitions to match the numbers used by mac80211 (also affects ath9k_htc). To ensure consistency wrt. pending frame count tracking, these counters are moved to the ath_txq struct, updated with the txq lock held, but only where the tx queue selected by the skb queue map actually matches the tx queue used by the driver for the frame. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Reported-by: Björn Smedman <bjorn.smedman@venatech.se> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-10-15ath9k: make rate control debugfs stats per stationFelix Fietkau
Move them to the same debugfs file that the other rc modules use. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-10-05ath9k: Report total tx/rx bytes and packets in debugfs.Ben Greear
Includes pkts/bytes that may have had errors, and includes wireless headers when counting bytes. Signed-off-by: Ben Greear <greearb@candelatech.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-06-02ath9k: enable the baseband watchdog events for AR9003Luis R. Rodriguez
This enables the baseband watchdog events for the AR9003 family on ath9k. Upon an a baseband watchdog interrupt we reset the hardware, this should address corner case conditions where normal operation can stall. Enable ATH_DBG_RESET to be able to review details of the bb watchdog interrupt once it happens. If you're curious how often this happens just grep the debugfs interrupt file. Cc: Sam Ng <sam.ng@atheros.com> Cc: Paul Shaw <paul.shaw@atheros.com> Cc: Don Breslin <don.breslin@atheros.com> Cc: Cliff Holden <cliff.holden@atheros.com Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-05-12ath9k: add debugfs files for reading/writing registersFelix Fietkau
Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-05-12ath9k: use debugfs_remove_recursive() instead of keeping pointers to all entriesFelix Fietkau
Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-04-16ath9k: add RXLP and RXHP to debugfs countersLuis R. Rodriguez
Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-04-06ath9k: fix compile error without debug enabledFelix Fietkau
commits 8e6f5aa250d6013ec0d66f9f45f376678d3fc4ab and db1a052b73f7c97f9e8b21f3f19a92313ed2acb1 accidentally introduced compile errors that happens when ath9k debug is not enabled. This patch fixes the declaration of the inline stubs to resolve this. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-03-31ath9k: split out access to rx status informationFelix Fietkau
This patch passes in a pointer to the ath_rx_status data structure for functions that need it, instead of letting them grab it directly from the ath_desc struct. This is useful for making it possible to allocate the intermediate rx status data separately. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-03-31ath9k: split out access to tx status informationFelix Fietkau
This patch passes in a pointer to the ath_tx_status data structure for functions that need it, instead of letting them grab it directly from the ath_desc struct. This is useful for making it possible to allocate the intermediate tx status data separately. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-01-12ath9k: Add debugfs file for RX errorsSujith
This file can be used to track frame reception errors. PHY error counts are also added. Location: ath9k/phy#/recv Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-11-28ath9k: separate debugfs support from CONFIG_ATH_DEBUGFelix Fietkau
In my setups, ath9k's debugfs files are most of the time much more useful than the messages generated by enabling CONFIG_ATH_DEBUG along with the right debug flags. Since CONFIG_ATH_DEBUG comes with a noticeable overhead on embedded systems, this patch makes it possible to use the debugfs files without that option. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-11-28ath9k: properly use the mac80211 rate control apiFelix Fietkau
This patch changes ath9k to pass proper MCS indexes and flags between the RC and the rest of the driver code. sc->cur_rate_table remains, as it's used by the RC code internally, but the rest of the driver code no longer uses it, so a potential new RC for ath9k would not have to update it. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-10-07atheros: add common debug printingLuis R. Rodriguez
ath9k uses this for now, ath9k_htc is expected to re-use this as well. We lave ath5k as is, but it certainly can also be converted later. The ath9k module parameter and debugfs entry is kept. Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-10-07ath9k: use ath_hw for DPRINTF() and debug init/exitLuis R. Rodriguez
DPRINTF() is used in hw specific related code, as such ensure we don't rely on the private driver core ath_softc struct when calling it. Drivers can then implement their own DPRINTF() as they see fit. Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-06-09 09:21:47 +0000