aboutsummaryrefslogtreecommitdiff
path: root/drivers/net/wireless/ath/ath9k
AgeCommit message (Collapse)Author
2013-05-28ath9k: use correct OTP register offsets for AR9550Gabor Juhos
Accessing the OTP memory on AR9950 causes a data bus like this: Data bus error, epc == 801f7774, ra == 801f7774 Oops[#1]: CPU: 0 PID: 1 Comm: swapper Not tainted 3.10.0-rc3 #592 task: 87c28000 ti: 87c22000 task.ti: 87c22000 $ 0 : 00000000 00000061 deadc0de 00000000 $ 4 : b8115f18 00015f18 00000007 00000004 $ 8 : 00000001 7c7c3c7c 7c7c7c7c 7c7c7c7c $12 : 7c7c3c7c 80320a68 00000000 7c7c7c3c $16 : 87cd8010 00015f18 00000007 00000000 $20 : 00000064 00000004 87c23c7c 8035210c $24 : 00000000 801f3674 $28 : 87c22000 87c23b48 00000001 801f7774 Hi : 00000000 Lo : 00000064 epc : 801f7774 ath9k_hw_wait+0x58/0xb0 Not tainted ra : 801f7774 ath9k_hw_wait+0x58/0xb0 Status: 1000cc03 KERNEL EXL IE Cause : 4080801c PrId : 00019750 (MIPS 74Kc) Modules linked in: Process swapper (pid: 1, threadinfo=87c22000, task=87c28000, ts=00000000) Stack : 0000000f 00000061 00002710 8006240c 00000001 87cd8010 87c23bb0 87cd8010 00000000 00000004 00000003 80210c7c 000000b3 67fa8000 0000032a 000006fe 000003e8 00000002 00000028 87c23bf0 000003ff 80210d24 803e5630 80210e28 00000000 00000007 87cd8010 00007044 00000004 00000061 000003ff 000001ff 87c26000 87cd8010 00000220 87cd8bb8 80210000 8020fcf4 87c22000 87c23c08 ... Call Trace: [<801f7774>] ath9k_hw_wait+0x58/0xb0 [<80210c7c>] ar9300_otp_read_word+0x80/0xd4 [<80210d24>] ar9300_read_otp+0x54/0xb0 [<8020fcf4>] ar9300_check_eeprom_header+0x1c/0x40 [<80210fe4>] ath9k_hw_ar9300_fill_eeprom+0x118/0x39c [<80206650>] ath9k_hw_eeprom_init+0x74/0xb4 [<801f96d0>] ath9k_hw_init+0x7ec/0x96c [<801e65ec>] ath9k_init_device+0x340/0x758 [<801f35d0>] ath_ahb_probe+0x21c/0x2c0 [<801c041c>] driver_probe_device+0xc0/0x1e4 [<801c05ac>] __driver_attach+0x6c/0xa4 [<801bea08>] bus_for_each_dev+0x64/0xa8 [<801bfa40>] bus_add_driver+0xcc/0x24c [<801c0954>] driver_register+0xbc/0x17c [<803f8fc0>] ath9k_init+0x5c/0x88 [<800608fc>] do_one_initcall+0xec/0x1a0 [<803e6a68>] kernel_init_freeable+0x13c/0x200 [<80309cdc>] kernel_init+0x1c/0xe4 [<80062450>] ret_from_kernel_thread+0x10/0x18 On the AR9550, the OTP registers are located at the same address as on the AR9340. Use the correct values to avoid the error. Cc: stable@vger.kernel.org # 3.6+ Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-05-24ath9k_hw: improve performance for AR934x v1.3+Felix Fietkau
AR934x v1.3 no longer needs the DCU backoff reduction workaround for preventing rx overruns, but in turn needs the number of usable Tx buffers to be reduced slightly. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-05-24ath9k_hw: fix host interface reset on AR934xFelix Fietkau
If a local bus timeout has been detected, the host interface needs to be reset to clear the errors. AR934x uses a different synchronous interrupt bit to indicate this, so the check needs to be fixed. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-05-24ath9k_hw: fix spur mitigation issues on AR934xFelix Fietkau
Do not subtract spur power from noise floor on this chip, as it can lead to packet loss and other connectivity issues. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-05-22ath9k: prevent aggregation session deadlocksFelix Fietkau
Waiting for all subframes of an existing aggregation session to drain before allowing mac80211 to start a new one is fragile and deadlocks caused by this behavior have been observed. Since mac80211 has proper synchronization for aggregation session start/stop handling, a better approach to session handling is to simply allow mac80211 to start a new session at any time. This requires changing the code to discard any packets outside of the BlockAck window in the A-MPDU software retry code. This patch implements the above and also simplifies the code. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-05-17ath9k: fix draining aggregation tid buffersFelix Fietkau
After a tx attempt, an A-MPDU subframe can still have fi->retries at 0 (if the retry count wasn't incremented due to powersave). In that case it is still tracked as part of the block ack window, so when draining the tid queue, its sequence number needs to be cleared from the pending frame bitmap. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-05-17ath9k: fix rate handling/reportingFelix Fietkau
This patch fixes some issues introduced in the rate control API rework. When not running aggregation, copy bf->rates into info->control.rates before applying the rate control status to it. In ath_lookup_rate, the rates need to be pulled from bf->rates, not the tx info. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-05-17ath9k: fix aggregation stop/flush handlingFelix Fietkau
When aggregation stop is requested, don't run the mac80211 aggregation stop callback yet, while the session is still blocked. Also, when aggregation flush is requested, don't run the callback at all. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-05-17ath9k_hw: Enable manual peak calibration for AR9485Sujith Manoharan
Manual peak calibration is currently enabled only for AR9462 and AR9565. This is also required for AR9485. The initvals are also modified to disable HW peak calibration. Cc: <stable@vger.kernel.org> Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-05-17ath9k: Fix crash on module unloadSujith Manoharan
Make sure that any open relayfs files are closed before unregistering with mac80211, otherwise this crash is seen: [ 1331.097846] BUG: unable to handle kernel paging request at 6b6b6b8b [ 1331.098170] IP: [<c063d0d6>] debugfs_remove+0x26/0x80 [ 1331.098170] *pdpt = 000000002f9aa001 *pde = 0000000000000000 [ 1331.098170] Oops: 0000 [#1] PREEMPT SMP [ 1331.098170] Modules linked in: iptable_raw xt_CT nf_conntrack_ipv4 nf_defrag] [ 1331.098170] Pid: 4794, comm: rmmod Tainted: G WC 3.9.1+ #5 To Be Fi. [ 1331.098170] EIP: 0060:[<c063d0d6>] EFLAGS: 00010202 CPU: 0 [ 1331.098170] EIP is at debugfs_remove+0x26/0x80 [ 1331.098170] EAX: f2f3acd0 EBX: f2f3acd0 ECX: 00000006 EDX: f8622348 [ 1331.098170] ESI: 6b6b6b6b EDI: 00000001 EBP: ee251e14 ESP: ee251e0c [ 1331.098170] DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068 [ 1331.098170] CR0: 8005003b CR2: 6b6b6b8b CR3: 2e7b7000 CR4: 000007e0 [ 1331.098170] DR0: 00000000 DR1: 00000000 DR2: 00000000 DR3: 00000000 [ 1331.098170] DR6: ffff0ff0 DR7: 00000400 [ 1331.098170] Process rmmod (pid: 4794, ti=ee250000 task=efaa2560 task.ti=ee25) [ 1331.098170] Stack: [ 1331.098170] f241e170 0000000a ee251e1c f861394d ee251e28 c04e3088 f241e170 4 [ 1331.098170] c04e30fe f45482b0 ee251e54 c04e3187 f25e86b0 ee251e54 f8618748 0 [ 1331.098170] 0000000a 00000001 ee251e68 f860065b f2509e20 f25085a0 f5b6e8a4 8 [ 1331.098170] Call Trace: [ 1331.098170] [<f861394d>] remove_buf_file_handler+0xd/0x20 [ath9k] [ 1331.098170] [<c04e3088>] relay_remove_buf+0x18/0x30 [ 1331.098170] [<c04e30fe>] relay_close_buf+0x2e/0x40 [ 1331.098170] [<c04e3187>] relay_close+0x77/0xf0 [ 1331.098170] [<f8618748>] ? dpd_exit+0x38/0x40 [ath9k] [ 1331.098170] [<f860065b>] ath9k_deinit_softc+0x8b/0xa0 [ath9k] [ 1331.098170] [<f86006b8>] ath9k_deinit_device+0x48/0x60 [ath9k] [ 1331.098170] [<f86107f1>] ath_pci_remove+0x31/0x50 [ath9k] [ 1331.098170] [<c06dbff8>] pci_device_remove+0x38/0xc0 [ 1331.098170] [<c079daa4>] __device_release_driver+0x64/0xc0 [ 1331.098170] [<c079db97>] driver_detach+0x97/0xa0 [ 1331.098170] [<c079cacc>] bus_remove_driver+0x6c/0xe0 [ 1331.098170] [<c079c197>] ? bus_put+0x17/0x20 [ 1331.098170] [<c079cae3>] ? bus_remove_driver+0x83/0xe0 [ 1331.098170] [<c079e709>] driver_unregister+0x49/0x80 [ 1331.098170] [<c06dc138>] pci_unregister_driver+0x18/0x80 [ 1331.098170] [<f8610602>] ath_pci_exit+0x12/0x20 [ath9k] [ 1331.098170] [<f8619ce0>] ath9k_exit+0x17/0x337 [ath9k] [ 1331.098170] [<c09e537d>] ? mutex_unlock+0xd/0x10 [ 1331.098170] [<c04bd36c>] sys_delete_module+0x17c/0x250 [ 1331.098170] [<c0540dc4>] ? do_munmap+0x244/0x2d0 [ 1331.098170] [<c0540e96>] ? vm_munmap+0x46/0x60 [ 1331.098170] [<c09e8dc4>] ? restore_all+0xf/0xf [ 1331.098170] [<c09ebf50>] ? __do_page_fault+0x4c0/0x4c0 [ 1331.098170] [<c04b18e4>] ? trace_hardirqs_on_caller+0xf4/0x180 [ 1331.098170] [<c09ef28d>] sysenter_do_call+0x12/0x38 [ 1331.098170] Code: 90 8d 74 26 00 55 89 e5 83 ec 08 89 1c 24 89 74 24 04 3e 82 [ 1331.098170] EIP: [<c063d0d6>] debugfs_remove+0x26/0x80 SS:ESP 0068:ee251e0c [ 1331.098170] CR2: 000000006b6b6b8b [ 1331.727971] ---[ end trace b5bb9f2066cef7f9 ]--- Cc: <stable@vger.kernel.org> Acked-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de> Tested-by: Ben Greear <greearb@candelatech.com> Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-05-17net/wireless: ATH9K should depend on HAS_DMAGeert Uytterhoeven
If NO_DMA=y: drivers/built-in.o: In function `ath9k_beacon_generate': drivers/net/wireless/ath/ath9k/beacon.c:146: undefined reference to `dma_unmap_single' drivers/net/wireless/ath/ath9k/beacon.c:174: undefined reference to `dma_map_single' drivers/net/wireless/ath/ath9k/beacon.c:176: undefined reference to `dma_mapping_error' drivers/built-in.o: In function `ath9k_beacon_remove_slot': drivers/net/wireless/ath/ath9k/beacon.c:252: undefined reference to `dma_unmap_single' drivers/built-in.o: In function `ath_descdma_setup': drivers/net/wireless/ath/ath9k/init.c:382: undefined reference to `dmam_alloc_coherent' drivers/built-in.o: In function `ath_edma_get_buffers': drivers/net/wireless/ath/ath9k/recv.c:616: undefined reference to `dma_sync_single_for_cpu' drivers/built-in.o: In function `ath_get_next_rx_buf': drivers/net/wireless/ath/ath9k/recv.c:740: undefined reference to `dma_sync_single_for_cpu' drivers/built-in.o: In function `ath_rx_edma_cleanup': drivers/net/wireless/ath/ath9k/recv.c:176: undefined reference to `dma_unmap_single' drivers/built-in.o: In function `ath_rx_cleanup': drivers/net/wireless/ath/ath9k/recv.c:340: undefined reference to `dma_unmap_single' drivers/built-in.o: In function `ath_rx_edma_buf_link': drivers/net/wireless/ath/ath9k/recv.c:122: undefined reference to `dma_sync_single_for_cpu' drivers/built-in.o: In function `ath_rx_tasklet': drivers/net/wireless/ath/ath9k/recv.c:1275: undefined reference to `dma_map_single' drivers/net/wireless/ath/ath9k/recv.c:1277: undefined reference to `dma_mapping_error' drivers/net/wireless/ath/ath9k/recv.c:1283: undefined reference to `dma_unmap_single' drivers/built-in.o: In function `ath_rx_edma_init': drivers/net/wireless/ath/ath9k/recv.c:226: undefined reference to `dma_map_single' drivers/net/wireless/ath/ath9k/recv.c:229: undefined reference to `dma_mapping_error' drivers/built-in.o: In function `ath_rx_init': drivers/net/wireless/ath/ath9k/recv.c:303: undefined reference to `dma_map_single' drivers/net/wireless/ath/ath9k/recv.c:306: undefined reference to `dma_mapping_error' drivers/built-in.o: In function `ath_tx_complete_buf': drivers/net/wireless/ath/ath9k/xmit.c:2088: undefined reference to `dma_unmap_single' drivers/built-in.o: In function `ath_txstatus_setup': drivers/net/wireless/ath/ath9k/xmit.c:2344: undefined reference to `dmam_alloc_coherent' drivers/built-in.o: In function `ath_tx_set_retry': drivers/net/wireless/ath/ath9k/xmit.c:307: undefined reference to `dma_sync_single_for_cpu' drivers/built-in.o: In function `ath_tx_setup_buffer': drivers/net/wireless/ath/ath9k/xmit.c:1887: undefined reference to `dma_map_single' drivers/net/wireless/ath/ath9k/xmit.c:1889: undefined reference to `dma_mapping_error' Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Luis R. Rodriguez <mcgrof@qca.qualcomm.com> Cc: John W. Linville <linville@tuxdriver.com> Cc: linux-wireless@vger.kernel.org Cc: netdev@vger.kernel.org Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-05-08ath9k: Update initvals for AR9565Sujith Manoharan
* Register Modification for xLNA board. * TX gain table modification for zero calibration. * AUX chain (LNA2) sensitivity enhancement * Modify diversity bias default setting in INI. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-05-08ath9k: Fix beacon reconfigurationSujith Manoharan
When a reset or a channel-change happens, for managed mode, the HW beacon timers have to be programmed after the TSF has been synchronized. This is handled via the sync flags. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-05-03ath9k: fix key allocation error handling for powersave keysFelix Fietkau
If no keycache slots are available, ath_key_config can return -ENOSPC. If the key index is not checked for errors, it can lead to logspam that looks like this: "ath: wiphy0: keyreset: keycache entry 228 out of range" This can cause follow-up errors if the invalid keycache index gets used for tx. Cc: stable@vger.kernel.org Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-04-23ath9k: Fix RX DMA mappingSujith Manoharan
After the commit "ath9k: improve dma map failure handling", the wrong buffer was DMA-unmapped, introducing warnings like the one below. This patch fixes the issue. WARNING: at /home/sujith/dev/wireless-testing/lib/dma-debug.c:986 check_sync+0x4bc/0x580() Hardware name: LIFEBOOK AH531 ath9k 0000:02:00.0: DMA-API: device driver tries to sync DMA memory it has not allocated [device address=0x00000000d9012800] [size=48 bytes] Pid: 86, comm: kworker/u:5 Tainted: G W O 3.9.0-rc8-wl-debug #106 Call Trace: [<ffffffff810410c0>] warn_slowpath_common+0x70/0xa0 [<ffffffff8104113c>] warn_slowpath_fmt+0x4c/0x50 [<ffffffff8125432c>] check_sync+0x4bc/0x580 [<ffffffff8109e5f7>] ? trace_hardirqs_on_caller+0xa7/0x190 [<ffffffff8109e6ed>] ? trace_hardirqs_on+0xd/0x10 [<ffffffff81254488>] debug_dma_sync_single_for_device+0x48/0x50 [<ffffffffa0a53825>] ? ath9k_iowrite32+0x35/0x90 [ath9k] [<ffffffff812512f0>] ? swiotlb_tbl_sync_single+0x50/0x90 [<ffffffff81251350>] ? swiotlb_sync_single+0x20/0x30 [<ffffffff8125137f>] ? swiotlb_sync_single_for_device+0xf/0x20 [<ffffffffa0a58baf>] ath_rx_edma_buf_link+0xef/0x140 [ath9k] [<ffffffffa0a58c4e>] ath_rx_addbuffer_edma+0x4e/0x90 [ath9k] [<ffffffffa0a59c51>] ath_startrecv+0xf1/0x120 [ath9k] [<ffffffffa0a550e0>] ath_complete_reset+0x20/0x130 [ath9k] [<ffffffffa0a5790d>] ath_reset_internal+0x10d/0x210 [ath9k] [<ffffffffa0a5878c>] ath9k_config+0x47c/0x7b0 [ath9k] [<ffffffffa06d4978>] ieee80211_hw_config+0x88/0x3f0 [mac80211] [<ffffffffa06d4a3f>] ? ieee80211_hw_config+0x14f/0x3f0 [mac80211] [<ffffffffa06dbed1>] __ieee80211_scan_completed+0xc1/0x440 [mac80211] [<ffffffffa06dd002>] ieee80211_scan_work+0x82/0x440 [mac80211] [<ffffffff810606a3>] process_one_work+0x1e3/0x530 [<ffffffff81060641>] ? process_one_work+0x181/0x530 [<ffffffff8106163f>] worker_thread+0x10f/0x3c0 [<ffffffff81061530>] ? manage_workers+0x330/0x330 [<ffffffff810665da>] kthread+0xea/0xf0 [<ffffffff810664f0>] ? kthread_create_on_node+0x140/0x140 [<ffffffff8146085c>] ret_from_fork+0x7c/0xb0 [<ffffffff810664f0>] ? kthread_create_on_node+0x140/0x140 Cc: Felix Fietkau <nbd@openwrt.org> Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Acked-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-04-23ath9k: Use lockless variants for the RX fifo queueSujith Manoharan
The RX fifo can be accessed from the common tasklet or it can be reaped/cleaned when RX is stopped, which is done when doing a reset or channel change - this happens in process context. Since it is ensured that there are no pending tasklets when stopping RX and cleaning the FIFO, there is no need to use SKB queue functions which take internal locks. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Acked-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-04-23ath9k: Reduce deep indentationSujith Manoharan
The EDMA case is handled first, so the else condition can be removed. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Acked-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-04-23ath9k: Remove unused argument "size"Sujith Manoharan
Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Acked-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-04-23ath9k: add support for the new rate control APIFelix Fietkau
Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-04-23ath9k: merge ath_tx_start_dma into ath_tx_startFelix Fietkau
The split makes no sense and merging the functions makes further changes easier to implement Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-04-23ath9k: apply coverage class on slottime tooMathias Kretschmer
According to 802.11-2007 17.3.8.6 (slot time), the slot time should be increased by 3 us * coverage class. The code only increased the ack timeout, which is fixed by this patch. We have noticed in our long shot scenario that we see less collisions with this patch. Signed-off-by: Mathias Kretschmer <mathias.kretschmer@fokus.fraunhofer.de> [add standard reference and commit message] Signed-off-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-04-23Merge branch 'master' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless Conflicts: drivers/net/wireless/brcm80211/brcmsmac/mac80211_if.c
2013-04-22ath9k: always set common->macaddr to the MAC adress of a virtual interfaceFelix Fietkau
In some cases it can be useful to change the MAC address of a virtual interface to something that's completely different from the EEPROM stored MAC address. In this case it is a bad idea to use the EEPROM MAC address for calculating the BSSID mask, as that would make it too wide. In one case a few devices have been observed to send ACKs for many packets on the channel not directed at them, which results in a neat Denial of Service attack on the channel. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-04-22ath: update hardware mac address with bssid maskFelix Fietkau
Preparation for updating common->macaddr along with virtual interface MAC address changes. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-04-22ath9k: use GFP_ATOMIC under spinlockDan Carpenter
This is called with spinlocks held so we have to use GFP_ATOMIC. It's the sc_pcu_lock in ath9k_stop() that's the issue. The call tree looks like this: ath9k_stop() ath_prepare_reset() ath_stoprecv() ath_flushrecv() ath_rx_tasklet() ath9k_dfs_process_phyerr() pd->add_pulse() => dpd_add_pulse() channel_detector_get() channel_detector_create() pri_detector_init() channel_detector_create() uses GFP_ATOMIC as well. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Tested-by: Zefir Kurtisi <zefir.kurtisi@neratec.com> Acked-by: Zefir Kurtisi <zefir.kurtisi@neratec.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-04-22ath9k: change DFS logging to use ath_dbg()Zefir Kurtisi
The DFS pattern detector was initially planned to reside on a higher layer and used generic pr_*() logging functions. Being part of ath9k, use ath_dbg() instead and make DFS log ouput selectable via ATH_DBG_DFS (0x20000) at runtime. This patch does not contain functional modifications. Signed-off-by: Zefir Kurtisi <zefir.kurtisi@neratec.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-04-12ath9k_hw: change AR9580 initvals to fix a stability issueFelix Fietkau
The hardware parsing of Control Wrapper Frames needs to be disabled, as it has been causing spurious decryption error reports. The initvals for other chips have been updated to disable it, but AR9580 was left out for some reason. Cc: stable@vger.kernel.org Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-04-10ath9k: implement buffer holding handling for EDMA FIFOFelix Fietkau
Inside one FIFO slot queue, EDMA chipsets have the same link pointer re-read race condition as older chipsets, so the same buffer holding logic needs to be used in order to avoid use-after-free bugs. Unlike on older chips, it can be skipped for the end of the queue. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-04-10ath9k: detect more kinds of invalid descriptorsFelix Fietkau
If AR_CRCErr, AR_PHYErr, AR_DecryptCRCErr or AR_MichaelErr is indicated in the rx status word, but AR_RxFrameOK is also set, the descriptor contents are typically invalid. This can show up as a warning about invalid MCS rates in a frame. Even with those checks in place, a descriptor with invalid MCS rates can still sometimes make it through to the driver (mostly on older hardware like AR91xx). Detect such errors in the last descriptor of a frame and discard the whole frame if present. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-04-10ath9k: fix handling of broken descriptorsFelix Fietkau
As the comment in ath_get_next_rx_buf indicates, if a descriptor with the done bit set follows one with the done bit cleared, both descriptors should be discarded, however the driver is not doing that yet. To fix this, use the rs->rs_more flag as an indicator that the following frame should be discarded. This also helps with the split buffer case: if the first part of the frame is discarded, the following parts need to be discarded as well, since they contain no valid header or usable data. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-04-10ath9k: improve dma map failure handlingFelix Fietkau
Instead of leaving the buffer without skb and breaking out of the loop (which could leak the rx buffer), use the common error path. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-04-10ath9k_common: remove ath9k_cmn_padposFelix Fietkau
It is equivalent to ieee80211_hdrlen Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-04-10ath9k_hw: make various ar5416/ar91xx rf banks constFelix Fietkau
Banks 0-3,7 are neither modified at run time, nor SREV dependent. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-04-10ath9k_hw: clean up RF Bank6 handling on AR5416/AR91xxFelix Fietkau
There are two sets of initvals for this RF bank, one with TPC support and one without. The TPC one always gets used, so remove the other one to avoid confusion. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-04-10Merge branch 'for-john' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next Conflicts: drivers/net/wireless/ath/carl9170/debug.c drivers/net/wireless/ath/carl9170/main.c net/mac80211/ieee80211_i.h
2013-04-10Merge branch 'master' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless Conflicts: drivers/net/wireless/rt2x00/rt2x00pci.c
2013-04-08ath9k: add support for DFS master modeZefir Kurtisi
These are the remaining knobs in ath9k to support DFS: * mark AR9280 and AR9580 as DFS tested * synchronize DFS regulatory domain to reg notifyer * set required RX filter flags for radar detection * process radar PHY errors at DFS detector * notify DFS master on radar detection DFS support requires CONFIG_ATH9K_DFS_CERTIFIED to be set. Signed-off-by: Zefir Kurtisi <zefir.kurtisi@neratec.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-04-08ath9k: add debugfs based DFS radar simulationZefir Kurtisi
This helps testing DFS without radar generating equipment and is required for certification. Signed-off-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de> Signed-off-by: Zefir Kurtisi <zefir.kurtisi@neratec.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-04-08ath9k: add interface combinations for DFS masterZefir Kurtisi
Signed-off-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de> Signed-off-by: Zefir Kurtisi <zefir.kurtisi@neratec.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-04-08ath9k_htc: accept 1.x firmware newer than 1.3Felix Fietkau
Since the firmware has been open sourced, the minor version has been bumped to 1.4 and the API/ABI will stay compatible across further 1.x releases. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Cc: stable@vger.kernel.org Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-04-08ath9k: fix DFS detector called in softirq contextZefir Kurtisi
Signed-off-by: Zefir Kurtisi <zefir.kurtisi@neratec.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-04-03ath9k: Re-enable interrupts after a channel change failureRobert Shade
ath_complete_reset will not be called if ath9k_hw_reset is unsuccessful, so we need to re-enable intertupts to balence the previous ath_prepare_reset call. Also schedule a reset as a best effort method to recover the chip from whatever state caused the channel change failure. Fixes https://bugzilla.kernel.org/show_bug.cgi?id=55771 Signed-off-by: Robert Shade <robert.shade@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-03-29Merge branch 'master' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless Conflicts: net/mac80211/sta_info.c net/wireless/core.h
2013-03-27Show actual timeout value in failed calibration messages.Robert Shade
The messages are currently hard coding "1ms", which does not match the actual timeout being used. Signed-off-by: Robert Shade <robert.shade@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-03-27ath9k: trivial: change spectral relayfs bufferingZefir Kurtisi
The spectral data provided via relay-fs introduces a buffering latency given by the subbuf_size. To meet the requirements for delay-sensitive applications (like real-time spectral plotter), reduce subbuf_size and increase n_subbufs. Signed-off-by: Zefir Kurtisi <zefir.kurtisi@neratec.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-03-27ath9k: avoid queueing hw check work when suspendedLuis R. Rodriguez
The following issue was reported. WARNING: at net/mac80211/util.c:599 ieee80211_can_queue_work.isra.7+0x32/0x40 [mac80211]() Hardware name: iMac12,1 queueing ieee80211 work while going to suspend Pid: 0, comm: swapper/0 Tainted: PF O 3.8.2-206.fc18.x86_64 #1 Call Trace: Mar 16 09:39:17 Parags-iMac kernel: [ 3993.642992] <IRQ> [<ffffffff8105e61f>] warn_slowpath_common+0x7f/0xc0 [<ffffffffa0581420>] ? ath_start_rx_poll+0x70/0x70 [ath9k] <ffffffff8105e716>] warn_slowpath_fmt+0x46/0x50 [<ffffffffa045b542>] ieee80211_can_queue_work.isra.7+0x32/0x40 Fix this by avoiding to queue the work if our device has already been marked as suspended or stopped. Reported-by: Parag Warudkar <parag.lkml@gmail.com> Tested-by: Parag Warudkar <parag.lkml@gmail.com> Cc: stable@vger.kernel.org Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-03-25Merge branch 'for-john' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next
2013-03-25mac80211: Use a cfg80211_chan_def in ieee80211_hw_conf_chanKarl Beldan
Drivers that don't use chanctxes cannot perform VHT association because they still use a "backward compatibility" pair of {ieee80211_channel, nl80211_channel_type} in ieee80211_conf and ieee80211_local. Signed-off-by: Karl Beldan <karl.beldan@rivierawaves.com> [fix kernel-doc] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-03-18ath9k: limit tx path hang check to normal data queuesFelix Fietkau
The beacon and multicast-buffer queues are managed by the beacon tasklet, and the generic tx path hang check does not help in any way here. Running it on those queues anyway can introduce some race conditions leading to unnecessary chip resets. Cc: stable@vger.kernel.org Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-03-18ath9k_hw: revert chainmask to user configuration after calibrationFelix Fietkau
The commit 'ath9k_hw: fix calibration issues on chainmask that don't include chain 0' changed the hardware chainmask to the chip chainmask for the duration of the calibration, but the revert to user configuration in the reset path runs too early. That causes some issues with limiting the number of antennas (including spurious failure in hardware-generated packets). Fix this by reverting the chainmask after the essential parts of the calibration that need the workaround, and before NF calibration is run. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Reported-by: Wojciech Dubowik <Wojciech.Dubowik@neratec.com> Tested-by: Wojciech Dubowik <Wojciech.Dubowik@neratec.com> Cc: stable@vger.kernel.org Signed-off-by: John W. Linville <linville@tuxdriver.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-07-16 19:21:43 +0000