aboutsummaryrefslogtreecommitdiff
path: root/drivers/net
AgeCommit message (Collapse)Author
2013-01-28dm9601: support dm9620 variantPeter Korsgaard
dm9620 is a newer variant of dm9601 with more features (usb 2.0, checksum offload, ..), but it can also be put in a dm9601 compatible mode, allowing us to reuse the existing driver. This does mean that the extended features like checksum offload cannot be used, but that's hardly critical on a 100mbps interface. Thanks to Sławek Wernikowski <slawek@wernikowski.net> for providing me with a dm9620 based device to test. Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-01-28net: phy: icplus: fix broken INTR pin settingsGiuseppe CAVALLARO
This patch fixes the setting of the INTR pin that is valid for IP101 A/G device and not for the IP1001. Reported-by: Anunay Saxena <anunay.saxena@st.com> Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-01-28net: phy: icplus: Use the RGMII interface mode to configure clock delaysStuart Menefy
Like several other PHY devices which support RGMII, the IC+1001 allows additional delays to by added to the RX_CLK and TX_CLK signals to compensate for skew between the clock and data signals. Previously this was always enabled, but this change makes use of the different RGMII interface modes to allow the user to specify whether this should be enabled. Signed-off-by: Stuart Menefy <stuart.menefy@st.com> Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-01-27r8169: fix vlan tag read ordering.françois romieu
Control of receive descriptor must not be returned to ethernet chipset before vlan tag processing is done. VLAN tag receive word is now reset both in normal and error path. Signed-off-by: Francois Romieu <romieu@fr.zoreil.com> Spotted-by: Timo Teras <timo.teras@iki.fi> Cc: Hayes Wang <hayeswang@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-01-27net: cdc_ncm: use IAD provided by the USB coreBjørn Mork
commit 9992c2e (net: cdc_ncm: workaround for missing CDC Union) added code to lookup an IAD for the interface we are probing. This is redundant. The USB core has already done the lookup and saved the result in the USB interface struct. Use that instead. Cc: Greg Suarez <gsuarez@smithmicro.com> Cc: Alexey Orishko <alexey.orishko@stericsson.com> Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-01-27Merge branch 'for-davem' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless John W. Linville says: ==================== This is a batch of fixes intende for the 3.8 stream. Regarding the iwlwifi bits, Johannes says this: "Please pull to get a single fix from Emmanuel for a bug I introduced due to misunderstanding the code." Regarding the mac80211 bits, Johannes says this: "I have a few small fixes for you: * some mesh frames would cause encryption warnings -- fixes from Bob * scanning would pretty much break an association if we transmitted anything to the AP while scanning -- fix from Stanislaw * mode injection was broken by channel contexts -- fix from Felix * FT roaming was broken: hardware crypto would get disabled by it" Along with that, a handful of other fixes confined to specific drivers. Avinash Patil fixes a typo in a NULL check in mwifiex. Larry Finger fixes a build warning in rtlwifi. Seems safe... Stanislaw Gruszka fixes iwlegacy to prevent microcode errors when switching from IBSS mode to STA mode. Felix Fietkau provides a trio of ath9k fixes related to proper tuning. Please let me know if there are problems! ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2013-01-27net: loopback: fix a dst refcounting issueEric Dumazet
Ben Greear reported crashes in ip_rcv_finish() on a stress test involving many macvlans. We tracked the bug to a dst use after free. ip_rcv_finish() was calling dst->input() and got garbage for dst->input value. It appears the bug is in loopback driver, lacking a skb_dst_force() before calling netif_rx(). As a result, a non refcounted dst, normally protected by a RCU read_lock section, was escaping this section and could be freed before the packet being processed. [<ffffffff813a3c4d>] loopback_xmit+0x64/0x83 [<ffffffff81477364>] dev_hard_start_xmit+0x26c/0x35e [<ffffffff8147771a>] dev_queue_xmit+0x2c4/0x37c [<ffffffff81477456>] ? dev_hard_start_xmit+0x35e/0x35e [<ffffffff8148cfa6>] ? eth_header+0x28/0xb6 [<ffffffff81480f09>] neigh_resolve_output+0x176/0x1a7 [<ffffffff814ad835>] ip_finish_output2+0x297/0x30d [<ffffffff814ad6d5>] ? ip_finish_output2+0x137/0x30d [<ffffffff814ad90e>] ip_finish_output+0x63/0x68 [<ffffffff814ae412>] ip_output+0x61/0x67 [<ffffffff814ab904>] dst_output+0x17/0x1b [<ffffffff814adb6d>] ip_local_out+0x1e/0x23 [<ffffffff814ae1c4>] ip_queue_xmit+0x315/0x353 [<ffffffff814adeaf>] ? ip_send_unicast_reply+0x2cc/0x2cc [<ffffffff814c018f>] tcp_transmit_skb+0x7ca/0x80b [<ffffffff814c3571>] tcp_connect+0x53c/0x587 [<ffffffff810c2f0c>] ? getnstimeofday+0x44/0x7d [<ffffffff810c2f56>] ? ktime_get_real+0x11/0x3e [<ffffffff814c6f9b>] tcp_v4_connect+0x3c2/0x431 [<ffffffff814d6913>] __inet_stream_connect+0x84/0x287 [<ffffffff814d6b38>] ? inet_stream_connect+0x22/0x49 [<ffffffff8108d695>] ? _local_bh_enable_ip+0x84/0x9f [<ffffffff8108d6c8>] ? local_bh_enable+0xd/0x11 [<ffffffff8146763c>] ? lock_sock_nested+0x6e/0x79 [<ffffffff814d6b38>] ? inet_stream_connect+0x22/0x49 [<ffffffff814d6b49>] inet_stream_connect+0x33/0x49 [<ffffffff814632c6>] sys_connect+0x75/0x98 This bug was introduced in linux-2.6.35, in commit 7fee226ad2397b (net: add a noref bit on skb dst) skb_dst_force() is enforced in dev_queue_xmit() for devices having a qdisc. Reported-by: Ben Greear <greearb@candelatech.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Tested-by: Ben Greear <greearb@candelatech.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-01-27virtio-net: reset virtqueue affinity when doing cpu hotplugWanlong Gao
Add a cpu notifier to virtio-net, so that we can reset the virtqueue affinity if the cpu hotplug happens. It improve the performance through enabling or disabling the virtqueue affinity after doing cpu hotplug. Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Jason Wang <jasowang@redhat.com> Cc: Eric Dumazet <erdnetdev@gmail.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: virtualization@lists.linux-foundation.org Cc: netdev@vger.kernel.org Signed-off-by: Wanlong Gao <gaowanlong@cn.fujitsu.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-01-27virtio-net: split out clean affinity functionWanlong Gao
Split out the clean affinity function to virtnet_clean_affinity(). Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Jason Wang <jasowang@redhat.com> Cc: Eric Dumazet <erdnetdev@gmail.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: virtualization@lists.linux-foundation.org Cc: netdev@vger.kernel.org Signed-off-by: Wanlong Gao <gaowanlong@cn.fujitsu.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-01-27virtio-net: fix the set affinity bug when CPU IDs are not consecutiveWanlong Gao
As Michael mentioned, set affinity and select queue will not work very well when CPU IDs are not consecutive, this can happen with hot unplug. Fix this bug by traversal the online CPUs, and create a per cpu variable to find the mapping from CPU to the preferable virtual-queue. Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Jason Wang <jasowang@redhat.com> Cc: Eric Dumazet <erdnetdev@gmail.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: virtualization@lists.linux-foundation.org Cc: netdev@vger.kernel.org Signed-off-by: Wanlong Gao <gaowanlong@cn.fujitsu.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-01-26can: pch_can: fix invalid error codesOlivier Sobrie
Errors in CAN protocol (location) are reported in data[3] of the can frame instead of data[2]. Cc: linux-stable <stable@vger.kernel.org> Signed-off-by: Olivier Sobrie <olivier@sobrie.be> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2013-01-26can: ti_hecc: fix invalid error codesOlivier Sobrie
Errors in CAN protocol (location) are reported in data[3] of the can frame instead of data[2]. Cc: linux-stable <stable@vger.kernel.org> Cc: Anant Gole <anantgole@ti.com> Signed-off-by: Olivier Sobrie <olivier@sobrie.be> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2013-01-26can: c_can: fix invalid error codesOlivier Sobrie
Errors in CAN protocol (location) are reported in data[3] of the can frame instead of data[2]. Cc: linux-stable <stable@vger.kernel.org> Cc: Bhupesh Sharma <bhupesh.sharma@st.com> Signed-off-by: Olivier Sobrie <olivier@sobrie.be> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2013-01-23Merge branch 'master' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless into for-davem
2013-01-23r8169: remove the obsolete and incorrect AMD workaroundTimo Teräs
This was introduced in commit 6dccd16 "r8169: merge with version 6.001.00 of Realtek's r8169 driver". I did not find the version 6.001.00 online, but in 6.002.00 or any later r8169 from Realtek this hunk is no longer present. Also commit 05af214 "r8169: fix Ethernet Hangup for RTL8110SC rev d" claims to have fixed this issue otherwise. The magic compare mask of 0xfffe000 is dubious as it masks parts of the Reserved part, and parts of the VLAN tag. But this does not make much sense as the VLAN tag parts are perfectly valid there. In matter of fact this seems to be triggered with any VLAN tagged packet as RxVlanTag bit is matched. I would suspect 0xfffe0000 was intended to test reserved part only. Finally, this hunk is evil as it can cause more packets to be handled than what was NAPI quota causing net/core/dev.c: net_rx_action(): WARN_ON_ONCE(work > weight) to trigger, and mess up the NAPI state causing device to hang. As result, any system using VLANs and having high receive traffic (so that NAPI poll budget limits rtl_rx) would result in device hang. Signed-off-by: Timo Teräs <timo.teras@iki.fi> Acked-by: Francois Romieu <romieu@fr.zoreil.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-01-23tuntap: limit the number of flow cachesJason Wang
We create new flow caches when a new flow is identified by tuntap, This may lead some issues: - userspace may produce a huge amount of short live flows to exhaust host memory - the unlimited number of flow caches may produce a long list which increase the time in the linear searching Solve this by introducing a limit of total number of flow caches. Cc: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-01-23tuntap: reduce memory using of queuesJason Wang
A MAX_TAP_QUEUES(1024) queues of tuntap device is always allocated unconditionally even userspace only requires a single queue device. This is unnecessary and will lead a very high order of page allocation when has a high possibility to fail. Solving this by creating a one queue net device when userspace only use one queue and also reduce MAX_TAP_QUEUES to DEFAULT_MAX_NUM_RSS_QUEUES which can guarantee the success of the allocation. Reported-by: Dirk Hohndel <dirk@hohndel.org> Cc: Eric Dumazet <eric.dumazet@gmail.com> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-01-23net: cdc_mbim: send ZLP only for the specific buggy deviceBjørn Mork
Reverting 328d7b8 and instead adding an exception for the Sierra Wireless MC7710. commit 328d7b8 (net: cdc_mbim: send ZLP after max sized NTBs) added a workaround for an issue observed on one specific device. Concerns were raised that this workaround adds a performance penalty to all devices based on questionable, if not buggy, behaviour of a single device: "If you add ZLP for NTBs of dwNtbOutMaxSize, you are heavily affecting CPU load, increasing interrupt load by factor of 2 in high load traffic scenario and possibly decreasing throughput for all other devices which behaves correctly." "The idea of NCM was to avoid extra ZLPs. If your transfer is exactly dwNtbOutMaxSize, it's known, you can submit such request on the receiver side and you do not need any EOT indicatation, so the frametime can be used for useful data." Adding a device specific exception to prevent the workaround from affecting well behaved devices. The assumption here is that needing a ZLP is truly an *exception*. We do not yet have enough data to verify this. The generic workaround in commit 328d7b8 should be considered acceptable despite the performance penalty if the exception list becomes a maintainance hassle. Cc: Alexey ORISHKO <alexey.orishko@stericsson.com> Cc: Yauheni Kaliuta <y.kaliuta@gmail.com> Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-01-22mwifiex: fix typo in PCIe adapter NULL checkAvinash Patil
Add missing "!" as we are supposed to check "!card->adapter" in PCIe suspend handler. Cc: "3.2+" <stable@vger.kernel.org> Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Reviewed-by: Sergey V. <sftp.mtuci@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-01-22ath9k: allow setting arbitrary antenna masks on AR9003+Felix Fietkau
Cc: stable@vger.kernel.org Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-01-22ath9k_hw: fix chain swap setting when setting rx chainmask to 5Felix Fietkau
Chain swapping should only be enabled when the EEPROM chainmask is set to 5, regardless of what the runtime chainmask is. Cc: stable@vger.kernel.org Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-01-22ath9k_hw: fix calibration issues on chainmask that don't include chain 0Felix Fietkau
Cc: stable@vger.kernel.org Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-01-22rtlwifi: Fix build warning introduced by commit a290593Larry Finger
The kbuild test robot reports the following warning with x86_64-randconfig-x955: warning: (RTL8192CE && RTL8192SE && RTL8192DE && RTL8723AE && RTL8192CU) selects RTLWIFI which has unmet direct dependencies (NETDEVICES && WLAN && (RTL8192CE || RTL8192CU || RTL8192SE || RTL8192DE)) This warning was introduced in commit a290593, "rtlwifi: Modify files for addition of rtl8723ae", and is d ue to a missing dependence of RTLWIFI on RTL8723AE. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: kbuild test robot <fengguang.wu@intel.com> Reported-by: kbuild test robot <fengguang.wu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-01-22iwlegacy: fix IBSS cleanupStanislaw Gruszka
We do not correctly change interface type when switching from IBSS mode to STA mode, that results in microcode errors. Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=886946 Reported-by: Jaroslav Skarvada <jskarvad@redhat.com> Cc: stable@vger.kernel.org Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-01-22Merge branch 'for-john' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/iwlwifi-fixes
2013-01-22netxen: fix off by one bug in netxen_release_tx_buffer()Eric Dumazet
Christoph Paasch found netxen could trigger a BUG in its dismantle phase, in netxen_release_tx_buffer(), using full size TSO packets. cmd_buf->frag_count includes the skb->data part, so the loop must start at index 1 instead of 0, or else we can make an out of bound access to cmd_buff->frag_array[MAX_SKB_FRAGS + 2] Christoph provided the fixes in netxen_map_tx_skb() function. In case of a dma mapping error, its better to clear the dma fields so that we don't try to unmap them again in netxen_release_tx_buffer() Reported-by: Christoph Paasch <christoph.paasch@uclouvain.be> Signed-off-by: Eric Dumazet <edumazet@google.com> Tested-by: Christoph Paasch <christoph.paasch@uclouvain.be> Cc: Sony Chacko <sony.chacko@qlogic.com> Cc: Rajesh Borundia <rajesh.borundia@qlogic.com> Signed-off-by: Christoph Paasch <christoph.paasch@uclouvain.be> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-01-21cdc_ncm: add support FLAG_NOARP for Infineon modem platformWei Shuai
Infineon(now Intel) HSPA Modem platform NCM cannot support ARP. we can define a new common structure wwan_noarp_info. Then more similiar NO ARP devices can be handled easily Signed-off-by: Wei Shuai <cpuwolf@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-01-21usbnet: add new flag FLAG_NOARP for usb net devicesWei Shuai
We do have some USB net devices, which cannot do ARP. so we can introduce a new flag FLAG_NOARP, then client drivers can easily handle this kind of devices Signed-off-by: Wei Shuai <cpuwolf@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-01-21net: cdc_ncm: fix error path for single interface probingBjørn Mork
commit bbc8d92 (net: cdc_ncm: add Huawei devices) implemented support for devices with a single combined control and data interface. Fix up the error path so that we do not double release such interfaces in case of probing failures. Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-01-21net: cdc_mbim: send ZLP after max sized NTBsBjørn Mork
We normally avoid sending ZLPs by padding NTBs with a zero byte if the NTB is shorter than dwNtbOutMaxSize, resulting in a short USB packet instead of a ZLP. But in the case where the NTB length is exactly dwNtbOutMaxSize and this is an exact multiplum of wMaxPacketSize, then we must send a ZLP. This fixes an issue seen on a Sierra Wireless MC7710 device where the transmission would fail whenever we ended up padding the NTBs to max size. Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-01-21net: cdc_ncm: workaround for missing CDC UnionBjørn Mork
Adding support for the MBIM mode in some Sierra Wireless devices. Some Sierra Wireless firmwares support CDC MBIM but have no CDC Union funtional descriptor. This violates the MBIM specification, but we can easily work around the bug by looking at the Interface Association Descriptor instead. This is most likely what Windows uses too, which explains how the firmware bug has gone unnoticed until now. This change will not affect any currently supported device conforming to the NCM or MBIM specifications, as they must have the CDC Union descriptor. Cc: Greg Suarez <gsuarez@smithmicro.com> Cc: Alexey Orishko <alexey.orishko@stericsson.com> Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-01-19net/hyperv: fix wrong length of mac addressJianjun Kong
This patch fixed wrong mac length, it should be ETH_ALEN, also replaced the hardcode 6 in hyperv_net.h Signed-off-by: Amos Kong <kongjianjun@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-01-19net: qmi_wwan: add ONDA MT8205 4G LTEBjørn Mork
The driver description files gives these names to the vendor specific functions on this modem: Diag VID_19D2&PID_0265&MI_00 NMEA VID_19D2&PID_0265&MI_01 AT cmd VID_19D2&PID_0265&MI_02 Modem VID_19D2&PID_0265&MI_03 Net VID_19D2&PID_0265&MI_04 Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-01-18net/mlx4_core: Set number of msix vectors under SRIOV mode to firmware defaultsOr Gerlitz
The lines if (mlx4_is_mfunc(dev)) { nreq = 2; } else { which hard code the number of requested msi-x vectors under multi-function mode to two can be removed completely, since the firmware sets num_eqs and reserved_eqs appropriately Thus, the code line: nreq = min_t(int, dev->caps.num_eqs - dev->caps.reserved_eqs, nreq); is by itself sufficient and correct for all cases. Currently, for mfunc mode num_eqs = 32 and reserved_eqs = 28, hence four vectors will be enabled. This triples (one vector is used for the async events and commands EQ) the horse power provided for processing of incoming packets on netdev RSS scheme, IO initiators/targets commands processing flows, etc. Reviewed-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Amir Vadai <amirv@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-01-18net/mlx4_en: Fix bridged vSwitch configuration for non SRIOV modeYan Burman
Commit 5b4c4d36860e "mlx4_en: Allow communication between functions on same host" introduced a regression under which a bridge acting as vSwitch whose uplink is an mlx4 Ethernet device become non-operative in native (non sriov) mode. This happens since broadcast ARP requests sent by VMs were loopback-ed by the HW and hence the bridge learned VM source MACs on both the VM and the uplink ports. The fix is to place the DMAC in the send WQE only under SRIOV/eSwitch configuration or when the device is in selftest. Reviewed-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Yan Burman <yanb@mellanox.com> Signed-off-by: Amir Vadai <amirv@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-01-18net: calxedaxgmac: throw away overrun framesRob Herring
The xgmac driver assumes 1 frame per descriptor. If a frame larger than the descriptor's buffer size is received, the frame will spill over into the next descriptor. So check for received frames that span more than one descriptor and discard them. This prevents a crash if we receive erroneous large packets. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Cc: netdev@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by: David S. Miller <davem@davemloft.net>
2013-01-17macvlan: fix macvlan_get_size()Eric Dumazet
commit df8ef8f3aaa (macvlan: add FDB bridge ops and macvlan flags) forgot to update macvlan_get_size() after the addition of IFLA_MACVLAN_FLAGS Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: John Fastabend <john.r.fastabend@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-01-17phy/marvell: remove fiber/copper autoselect on 88e1111Stef van Os
Remove the code that always enables copper/fiber autoselect, ignoring the DIS_FC strapping pin. The default value for this register is autoselect on anyway, and if you explicitly disable autoselect via strapping you probably really don't want autoselect. Signed-off-by: Stef van Os <stef.van.os@prodrive.nl> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-01-173c574_cs: fix operator precedence between << and &Nickolai Zeldovich
The code to print the FIFO size in tc574_config computes it as: 8 << config & Ram_size which evaluates the '<<' first, but the actual intent is to evaluate the '&' first. Add parentheses to enforce desired evaluation order. Signed-off-by: Nickolai Zeldovich <nickolai@csail.mit.edu> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-01-17Merge branch 'master' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless into for-davem
2013-01-16net: qmi_wwan: add TP-LINK HSUPA Modem MA180Bjørn Mork
The driver description files gives these names to the vendor specific functions on this modem: Diagnostics VID_2357&PID_0201&MI_00 NMEA VID_2357&PID_0201&MI_01 Modem VID_2357&PID_0201&MI_03 Networkcard VID_2357&PID_0201&MI_04 The "Networkcard" function has been verified to support these QMI services: ctl (1.3) wds (1.3) dms (1.2) nas (1.0) Reported-by: Thomas Schäfer <tschaefer@t-online.de> Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-01-16usbnet: dm9601: Fix incorrect commandTushar Behera
commit 24b1042c4eb2 ("usbnet: dm9601: apply introduced usb command APIs") removes the distiction between DM_WRITE_REG and DM_WRITE_REGS command. The distiction is reintroduced to the driver so that the functionality of the driver remains same. CC: Ming Lei <ming.lei@canonical.com> Signed-off-by: Tushar Behera <tushar.behera@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-01-16cxgb4: set coalesce parameters on all queuesThadeu Lima de Souza Cascardo
The coalesce parameters was set only on the first queue, which caused interrupt rates to be larger on all the other queues. This patch allows interrupt rates to be reduced for certain workloads and colaesce parameters by 41%. Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@linux.vnet.ibm.com> Cc: steved@us.ibm.com Cc: toml@us.ibm.com Signed-off-by: David S. Miller <davem@davemloft.net>
2013-01-16iwlwifi: audit single frames from AGG queue in RSEmmanuel Grumbach
The rate scaling won't treat the information in a frame with IEEE80211_TX_CTL_AMPDU set if IEEE80211_TX_STAT_AMPDU is cleared. But all the frames coming from an AGG tx queue have IEEE80211_TX_CTL_AMPDU set, and IEEE80211_TX_STAT_AMPDU is set only if the frame was sent in an AMPDU. This means that all the data in frames in AGG tx queues that aren't sent as an AMPDU is thrown away. This is even more harmful when in bad link conditions, the frames are sent in an AMPDU and then finally sent as single frame. So a lot of failures weren't reported and the rate scaling got stuck in high rates leading to very poor connectivity. Fix that by clearing IEEE80211_TX_CTL_AMPDU when the frame isn't part of an AMPDU. This bug was introduced by 2eb81a40aa521035ff9c8c8309e482dff523f8c9 iwlwifi: don't clear CTL_AMPDU on frame status This fix basically reverts the aforementioned commit. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-01-16ixgbe: Fix overwriting of rx_mtrl in ixgbe_ptp_hwtstamp_ioctlJacob Keller
This patch corrects a bug introduced by commit f3444d8b. The rxmtrl value for the UDP port to timestamp on was moved above the switch statement, but was overwritten to 0 if the ioctl selected one of the V1 filters. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2013-01-16ixgbe: only compile ixgbe_debugfs.o when enabledJacob Keller
This patch modifies ixgbe_debugfs.c and the Makefile for the ixgbe driver to only compile the file when the config is enabled. This means we can remove the #ifdef inside the ixgbe_debugfs.c file. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2013-01-14tg3: Fix crc errors on jumbo frame receiveNithin Nayak Sujir
TG3_PHY_AUXCTL_SMDSP_ENABLE/DISABLE macros do a blind write to the phy auxiliary control register and overwrite the EXT_PKT_LEN (bit 14) resulting in intermittent crc errors on jumbo frames with some link partners. Change the code to do a read/modify/write. Signed-off-by: Nithin Nayak Sujir <nsujir@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-01-14tg3: Avoid null pointer dereference in tg3_interrupt in netconsole modeNithin Nayak Sujir
When netconsole is enabled, logging messages generated during tg3_open can result in a null pointer dereference for the uninitialized tg3 status block. Use the irq_sync flag to disable polling in the early stages. irq_sync is cleared when the driver is enabling interrupts after all initialization is completed. Signed-off-by: Nithin Nayak Sujir <nsujir@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-01-14tun: fix LSM/SELinux labeling of tun/tap devicesPaul Moore
This patch corrects some problems with LSM/SELinux that were introduced with the multiqueue patchset. The problem stems from the fact that the multiqueue work changed the relationship between the tun device and its associated socket; before the socket persisted for the life of the device, however after the multiqueue changes the socket only persisted for the life of the userspace connection (fd open). For non-persistent devices this is not an issue, but for persistent devices this can cause the tun device to lose its SELinux label. We correct this problem by adding an opaque LSM security blob to the tun device struct which allows us to have the LSM security state, e.g. SELinux labeling information, persist for the lifetime of the tun device. In the process we tweak the LSM hooks to work with this new approach to TUN device/socket labeling and introduce a new LSM hook, security_tun_dev_attach_queue(), to approve requests to attach to a TUN queue via TUNSETQUEUE. The SELinux code has been adjusted to match the new LSM hooks, the other LSMs do not make use of the LSM TUN controls. This patch makes use of the recently added "tun_socket:attach_queue" permission to restrict access to the TUNSETQUEUE operation. On older SELinux policies which do not define the "tun_socket:attach_queue" permission the access control decision for TUNSETQUEUE will be handled according to the SELinux policy's unknown permission setting. Signed-off-by: Paul Moore <pmoore@redhat.com> Acked-by: Eric Paris <eparis@parisplace.org> Tested-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-01-14ath9k: disable the tasklet before taking the PCU lockFelix Fietkau
Fixes a reported CPU soft lockup where the tasklet tries to acquire the lock and blocks while ath_prepare_reset (holding the lock) waits for it to complete. Cc: stable@vger.kernel.org Reported-by: Robert Shade <robert.shade@gmail.com> Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-07-14 20:54:56 +0000