aboutsummaryrefslogtreecommitdiff
path: root/drivers/s390
AgeCommit message (Collapse)Author
2010-09-28Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (47 commits) tcp: Fix >4GB writes on 64-bit. net/9p: Mount only matching virtio channels de2104x: fix ethtool tproxy: check for transparent flag in ip_route_newports ipv6: add IPv6 to neighbour table overflow warning tcp: fix TSO FACK loss marking in tcp_mark_head_lost 3c59x: fix regression from patch "Add ethtool WOL support" ipv6: add a missing unregister_pernet_subsys call s390: use free_netdev(netdev) instead of kfree() sgiseeq: use free_netdev(netdev) instead of kfree() rionet: use free_netdev(netdev) instead of kfree() ibm_newemac: use free_netdev(netdev) instead of kfree() smsc911x: Add MODULE_ALIAS() net: reset skb queue mapping when rx'ing over tunnel br2684: fix scheduling while atomic de2104x: fix TP link detection de2104x: fix power management de2104x: disable autonegotiation on broken hardware net: fix a lockdep splat e1000e: 82579 do not gate auto config of PHY by hardware during nominal use ...
2010-09-26s390: use free_netdev(netdev) instead of kfree()Vasiliy Kulikov
Freeing netdev without free_netdev() leads to net, tx leaks. I might lead to dereferencing freed pointer. The semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) @@ struct net_device* dev; @@ -kfree(dev) +free_netdev(dev) Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-10Merge branch 'for-linus' of git://git.kernel.dk/linux-2.6-blockLinus Torvalds
* 'for-linus' of git://git.kernel.dk/linux-2.6-block: block: Range check cpu in blk_cpu_to_group scatterlist: prevent invalid free when alloc fails writeback: Fix lost wake-up shutting down writeback thread writeback: do not lose wakeup events when forking bdi threads cciss: fix reporting of max queue depth since init block: switch s390 tape_block and mg_disk to elevator_change() block: add function call to switch the IO scheduler from a driver fs/bio-integrity.c: return -ENOMEM on kmalloc failure bio-integrity.c: remove dependency on __GFP_NOFAIL BLOCK: fix bio.bi_rw handling block: put dev->kobj in blk_register_queue fail path cciss: handle allocation failure cfq-iosched: Documentation help for new tunables cfq-iosched: blktrace print per slice sector stats cfq-iosched: Implement tunable group_idle cfq-iosched: Do group share accounting in IOPS when slice_idle=0 cfq-iosched: Do not idle if slice_idle=0 cciss: disable doorbell reset on reset_devices blkio: Fix return code for mkdir calls
2010-08-23block: switch s390 tape_block and mg_disk to elevator_change()Jens Axboe
Now that we have this API, switch the two in-kernel users to it. Resolves an oops introduced by commit 1abec4fdbb142e3ccb6ce99832fae42129134a96. Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-08-21Input: sysrq - drop tty argument form handle_sysrq()Dmitry Torokhov
Sysrq operations do not accept tty argument anymore so no need to pass it to us. [Stephen Rothwell <sfr@canb.auug.org.au>: fix build breakage in drm code caused by sysrq using bool but not including linux/types.h] [Sachin Sant <sachinp@in.ibm.com>: fix build breakage in s390 keyboadr driver] Acked-by: Alan Cox <alan@lxorguk.ukuu.org.uk> Acked-by: Jason Wessel <jason.wessel@windriver.com> Acked-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-08-13Merge branch 'for-linus' of git://git390.marist.edu/pub/scm/linux-2.6Linus Torvalds
* 'for-linus' of git://git390.marist.edu/pub/scm/linux-2.6: [S390] partitions: fix build error in ibm partition detection code [S390] appldata: fix dev_get_stats 64 bit conversion [S390] wire up prlimit64 and fanotify* syscalls [S390] zcrypt: fix Kconfig dependencies [S390] sys_personality: follow u_long to unsigned int conversion [S390] dasd: fix format string types
2010-08-13Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (30 commits) ctcm: rename READ/WRITE defines to avoid redefinitions claw: rename READ/WRITE defines to avoid redefinitions phylib: available for any speed ethernet can: add limit for nframes and clean up signed/unsigned variables pkt_sched: Check .walk and .leaf class handlers pkt_sched: Fix sch_sfq vs tc_modify_qdisc oops caif-spi: Bugfix SPI_DATA_POS settings were inverted. caif: Bugfix - Increase default headroom size for control channel. net: make netpoll_rx return bool for !CONFIG_NETPOLL Bluetooth: Use 3-DH5 payload size for default ERTM max PDU size Bluetooth: Fix incorrect setting of remote_tx_win for L2CAP ERTM Bluetooth: Change default L2CAP ERTM retransmit timeout Bluetooth: Fix endianness issue with L2CAP MPS configuration net: Use NET_XMIT_SUCCESS where possible. isdn: mISDN: call pci_disable_device() if pci_probe() failed isdn: avm: call pci_disable_device() if pci_probe() failed isdn: avm: call pci_disable_device() if pci_probe() failed usbnet: rx_submit() should return an error code. pkt_sched: Add some basic qdisc class ops verification. Was: [PATCH] sfq: add dummy bind/unbind handles pkt_sched: sch_sfq: Add dummy unbind_tcf and put handles. Was: [PATCH] sfq: add dummy bind/unbind handles ...
2010-08-13[S390] dasd: fix format string typesHeiko Carstens
Get rid of these warnings: drivers/s390/block/dasd.c: In function '__dasd_device_check_expire': drivers/s390/block/dasd.c:1330: warning: format '%i' expects type 'int', but argument 4 has type 'long unsigned int' drivers/s390/block/dasd.c:1337: warning: format '%i' expects type 'int', but argument 4 has type 'long unsigned int' Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2010-08-12ctcm: rename READ/WRITE defines to avoid redefinitionsUrsula Braun
READ/WRITE seems to be a bit too generic for defines in a device driver. Just rename them to CTCM_READ/CTCM_WRITE to avoid warnings. Signed-off-by: Ursula Braun <ursula.braun@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-12claw: rename READ/WRITE defines to avoid redefinitionsHeiko Carstens
READ/WRITE seems to be a bit too generic for defines in a device driver. Just rename them to READ_CHANNEL/WRITE_CHANNEL which should suffice. Fixes this: In file included from drivers/s390/net/claw.c:93: drivers/s390/net/claw.h:78:1: warning: "WRITE" redefined In file included from /home2/heicarst/linux-2.6/arch/s390/include/asm/debug.h:12, from drivers/s390/net/claw.c:68: include/linux/fs.h:156:1: warning: this is the location of the previous definition Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Ursula Braun <ursula.braun@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-10Merge branch 'for-2.6.36' of git://git.kernel.dk/linux-2.6-blockLinus Torvalds
* 'for-2.6.36' of git://git.kernel.dk/linux-2.6-block: (149 commits) block: make sure that REQ_* types are seen even with CONFIG_BLOCK=n xen-blkfront: fix missing out label blkdev: fix blkdev_issue_zeroout return value block: update request stacking methods to support discards block: fix missing export of blk_types.h writeback: fix bad _bh spinlock nesting drbd: revert "delay probes", feature is being re-implemented differently drbd: Initialize all members of sync_conf to their defaults [Bugz 315] drbd: Disable delay probes for the upcomming release writeback: cleanup bdi_register writeback: add new tracepoints writeback: remove unnecessary init_timer call writeback: optimize periodic bdi thread wakeups writeback: prevent unnecessary bdi threads wakeups writeback: move bdi threads exiting logic to the forker thread writeback: restructure bdi forker loop a little writeback: move last_active to bdi writeback: do not remove bdi from bdi_list writeback: simplify bdi code a little writeback: do not lose wake-ups in bdi threads ... Fixed up pretty trivial conflicts in drivers/block/virtio_blk.c and drivers/scsi/scsi_error.c as per Jens.
2010-08-10Merge branch 'for-linus' of git://git390.marist.edu/pub/scm/linux-2.6Linus Torvalds
* 'for-linus' of git://git390.marist.edu/pub/scm/linux-2.6: [S390] dasd: tunable missing interrupt handler [S390] dasd: allocate fallback cqr for reserve/release [S390] topology: use default MC domain initializer [S390] initrd: change default load address [S390] cmm, smsgiucv_app: convert sender to uppercase [S390] cmm: add missing __init/__exit annotations [S390] cio: use all available paths for some internal I/O [S390] ccwreq: add ability to use all paths [S390] cio: ccw_device_online_store return -EINVAL in case of missing driver [S390] cio: Log the response from the unit check handler [S390] cio: CHSC SIOSL Support
2010-08-09s390: remove WARN_ON for misc_deregister() failuresAkinobu Mita
The previous change added WARN_ON() in misc_deregister(). So it is not necessary to WARN_ON() misc_deregister() failure by callers. Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-08-09[S390] dasd: tunable missing interrupt handlerStefan Haberland
This feature provides a user interface to specify the timeout for missing interrupts for standard I/O operations. Signed-off-by: Stefan Haberland <stefan.haberland@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2010-08-09[S390] dasd: allocate fallback cqr for reserve/releaseStefan Weinhuber
The DASD reserve and release ioctls use the preallocated memory pool of the respective device to build their CCW requests. However, when the device is busy, the pool may already be empty and the ioctl fails. Usually this can be recovered by calling the ioctl again, but in a situation in which we need to issue an unconditional reserve to make a device operational again, this would be not recoverable. To avoid a failure due to lack of memory, DASD device driver will preallocate enough memory for a single reserve/release request, which can be used if normal allocation fails. Signed-off-by: Stefan Weinhuber <wein@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2010-08-09[S390] cmm, smsgiucv_app: convert sender to uppercaseHendrik Brueckner
The sender kernel parameter contains a z/VM user ID where alphabetic characters must be specified in uppercase. Allow users to specify lowercase characters and convert the sender string to uppercase at module initialization. Signed-off-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2010-08-09[S390] cio: use all available paths for some internal I/OSebastian Ott
Use all available paths for the SENSE ID and STLCK commands. This prevents deadlocks in conjunction with reserved devices. Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2010-08-09[S390] ccwreq: add ability to use all pathsSebastian Ott
Change the ccwrequest infrastructure to use more than one channel path per start I/O. A flag "singlepath" is added to struct ccw_request - if set, the old behavior is used. This flag is set for all exploiters of the ccwrequest infrastructure - so there is no functional change through this patch. Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2010-08-09[S390] cio: ccw_device_online_store return -EINVAL in case of missing driverSebastian Ott
If no driver is attached to a device or the driver provides no set_online/set_offline function, setting this device online/offline via its sysfs online attribute will silently fail but return success. This patch changes the behavior to return -EINVAL in those cases. Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2010-08-09[S390] cio: Log the response from the unit check handlerMichael Ernst
Log the response from the unit check handler which triggers further cio internal i/o processing. Signed-off-by: Michael Ernst <mernst@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2010-08-09[S390] cio: CHSC SIOSL SupportMichael Ernst
A Linux interface for the CHSC command store-I/O-operation-status-and-initiate-logging (SIOSL). Model-dependent logging within the channel subsystem can be invoked via a helper function or a writable subchannel device attribute. Signed-off-by: Michael Ernst <mernst@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2010-08-07block: push down BKL into .open and .releaseArnd Bergmann
The open and release block_device_operations are currently called with the BKL held. In order to change that, we must first make sure that all drivers that currently rely on this have no regressions. This blindly pushes the BKL into all .open and .release operations for all block drivers to prepare for the next step. The drivers can subsequently replace the BKL with their own locks or remove it completely when it can be shown that it is not needed. The functions blkdev_get and blkdev_put are the only remaining users of the big kernel lock in the block layer, besides a few uses in the ioctl code, none of which need to serialize with blkdev_{get,put}. Most of these two functions is also under the protection of bdev->bd_mutex, including the actual calls to ->open and ->release, and the common code does not access any global data structures that need the BKL. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Christoph Hellwig <hch@infradead.org> Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-08-07block: remove q->prepare_flush_fn completelyFUJITA Tomonori
This removes q->prepare_flush_fn completely (changes the blk_queue_ordered API). Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-08-04Merge git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6: (276 commits) [SCSI] zfcp: Trigger logging in the FCP channel on qdio error conditions [SCSI] zfcp: Introduce experimental support for DIF/DIX [SCSI] zfcp: Enable data division support for FCP devices [SCSI] zfcp: Prevent access on uninitialized memory. [SCSI] zfcp: Post events through FC transport class [SCSI] zfcp: Cleanup QDIO attachment and improve processing. [SCSI] zfcp: Cleanup function parameters for sbal value. [SCSI] zfcp: Use correct width for timer_interval field [SCSI] zfcp: Remove SCSI device when removing unit [SCSI] zfcp: Use memdup_user and kstrdup [SCSI] zfcp: Fix retry after failed "open port" erp action [SCSI] zfcp: Fail erp after timeout [SCSI] zfcp: Use forced_reopen in terminate_rport_io callback [SCSI] zfcp: Register SCSI devices after successful fc_remote_port_add [SCSI] zfcp: Do not try "forced close" when port is already closed [SCSI] zfcp: Do not unblock rport from REOPEN_PORT_FORCED [SCSI] sd: add support for runtime PM [SCSI] implement runtime Power Management [SCSI] convert to the new PM framework [SCSI] Unify SAM_ and SAM_STAT_ macros ...
2010-08-04Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6: (1443 commits) phy/marvell: add 88ec048 support igb: Program MDICNFG register prior to PHY init e1000e: correct MAC-PHY interconnect register offset for 82579 hso: Add new product ID can: Add driver for esd CAN-USB/2 device l2tp: fix export of header file for userspace can-raw: Fix skb_orphan_try handling Revert "net: remove zap_completion_queue" net: cleanup inclusion phy/marvell: add 88e1121 interface mode support u32: negative offset fix net: Fix a typo from "dev" to "ndev" igb: Use irq_synchronize per vector when using MSI-X ixgbevf: fix null pointer dereference due to filter being set for VLAN 0 e1000e: Fix irq_synchronize in MSI-X case e1000e: register pm_qos request on hardware activation ip_fragment: fix subtracting PPPOE_SES_HLEN from mtu twice net: Add getsockopt support for TCP thin-streams cxgb4: update driver version cxgb4: add new PCI IDs ... Manually fix up conflicts in: - drivers/net/e1000e/netdev.c: due to pm_qos registration infrastructure changes - drivers/net/phy/marvell.c: conflict between adding 88ec048 support and cleaning up the IDs - drivers/net/wireless/ipw2x00/ipw2100.c: trivial ipw2100_pm_qos_req conflict (registration change vs marking it static)
2010-07-28Merge git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6: [SCSI] ibmvscsi: Fix oops when an interrupt is pending during probe [SCSI] zfcp: Update status read mempool [SCSI] zfcp: Do not wait for SBALs on stopped queue [SCSI] zfcp: Fix check whether unchained ct_els is possible [SCSI] ipr: fix resource path display and formatting
2010-07-28[SCSI] zfcp: Trigger logging in the FCP channel on qdio error conditionsChristof Schmitt
Exploit the cio siosl function to trigger logging in the FCP channel on qdio error conditions. Add a helper function in zfcp_qdio to ensure that tracing is only triggered once before calling qdio_shutdown. Trigger in zfcp for hardware logs are: - timeout for FSF requests to the FCP channel - "no recommendation" status from FCP channel - invalid FSF protocol status - stalled outbound queue - unknown request id on inbound queue - QDIO_ERROR_SLSB_STATE All of the above triggers run from the Linux qdio softirq context, so no additional synchronization is necessary for the handling of the ZFCP_STATUS_ADAPTER_SIOSL_ISSUED flag. Reviewed-by: Swen Schillig <swen@vnet.ibm.com> Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-07-28[SCSI] zfcp: Introduce experimental support for DIF/DIXFelix Beck
Introduce support for DIF/DIX in zfcp: Report the capabilities for the Scsi_host, map the protection data when issuing I/O requests and handle the new error codes. Also add the fsf data_direction field to the hba trace, it is useful information for debugging in that area. This is an EXPERIMENTAL feature for now. Signed-off-by: Felix Beck <felix.beck@de.ibm.com> Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-07-28[SCSI] zfcp: Enable data division support for FCP devicesChristof Schmitt
Try to enable data division support for FCP devices and indicate in the adapter status flag if it succeeded. Reviewed-by: Swen Schillig <swen@vnet.ibm.com> Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-07-28[SCSI] zfcp: Prevent access on uninitialized memory.Swen Schillig
Initialize allocated memory to zero to prevent access on error. This prevents a possible error in the error handling path. Signed-off-by: Swen Schillig <swen@vnet.ibm.com> Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-07-28[SCSI] zfcp: Post events through FC transport classSven Schuetz
Post FC transport class netlink events for usage in the userspace, e.g. for HBAAPI. Supported events are those required for the polled events in HBAAPI. - link up - link down - incoming RSCN (events related to FC-AL are not supported, as zfcp has no support for FC-AL) Signed-off-by: Sven Schuetz <sven@linux.vnet.ibm.com> Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-07-28[SCSI] zfcp: Cleanup QDIO attachment and improve processing.Swen Schillig
Some definitions and structures in the zfcp QDIO processing are improved by the removal of not required variables and processing steps. I addition the naming of some variables is changed to make their purpose more clear. Signed-off-by: Swen Schillig <swen@vnet.ibm.com> Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-07-28[SCSI] zfcp: Cleanup function parameters for sbal value.Swen Schillig
A lot of functions require the amount of SBALs as one of their parameter which is most times invariable. Therefore remove this parameter and set the SBAL value explicitly if a non standard value is required. In addition the warning message "oversized data" is replaced with a BUG_ON() statement assuring the limits defined and requested by zfcp. Signed-off-by: Swen Schillig <swen@vnet.ibm.com> Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-07-28[SCSI] zfcp: Use correct width for timer_interval fieldChristof Schmitt
The timer_interval is 14 bits in width. Introduce a define for properly masking the value. Reviewed-by: Swen Schillig <swen@vnet.ibm.com> Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-07-28[SCSI] zfcp: Remove SCSI device when removing unitChristof Schmitt
Configuring a LUN in zfcp, also creates a SCSI device. For consistency, it makes sense to remove the SCSI device when the LUN is deconfigured. Replace the flush_work with the call to scsi_remove_device: scsi_remove_device also takes the scan_mutex that synchronizes itself with any long running device discovery. Reviewed-by: Swen Schillig <swen@vnet.ibm.com> Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-07-28[SCSI] zfcp: Use memdup_user and kstrdupChristof Schmitt
Use the functions memdup_user and kstrdup to allocate memory and copy the data in one step, saving some lines of code. Reviewed-by: Swen Schillig <swen@vnet.ibm.com> Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-07-28[SCSI] zfcp: Fix retry after failed "open port" erp actionChristof Schmitt
Trying to enqueue a port erp action from the port erp strategy will fail in zfcp_erp_required_act. To try the same action again, return ZFCP_ERP_FAILED. Reviewed-by: Swen Schillig <swen@vnet.ibm.com> Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-07-28[SCSI] zfcp: Fail erp after timeoutChristof Schmitt
After a timeout notification, do not try to run the erp strategy. Return from the erp with "failed" to possibly trigger a retry. Reviewed-by: Swen Schillig <swen@vnet.ibm.com> Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-07-28[SCSI] zfcp: Use forced_reopen in terminate_rport_io callbackChristof Schmitt
When running in non-NPIV mode, the port_reopen in terminate_rport_io might succeed even though the remote port is not available. If the same port connection is held open from another operating system, the reopen is only a virtual operation and might not hit the SAN. Fix this by changing the call to forced_reopen that forces a logout/login operation in the SAN. Reviewed-by: Swen Schillig <swen@vnet.ibm.com> Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-07-28[SCSI] zfcp: Register SCSI devices after successful fc_remote_port_addChristof Schmitt
When the successful return of an adisc is the final step to set the port online, the registration of SCSI devices might be omitted. SCSI devices that have been removed before (due to a short dev_loss_tmo setting) might not be attached again. The problem is that the registration of SCSI devices is done only after erp has finished. The correct place would be after the call to fc_remote_port_add to mimick the scan in the FC transport class. Change the registration of SCSI devices to be triggered after the fc_remote_port_add call. For the initial inquiry command to succeed, the unit must also be open. If the unit reopen is still pending, the inquiry command to the LUN will be deferred with DID_IMM_RETRY, so there is no harm from this approach. Reviewed-by: Swen Schillig <swen@vnet.ibm.com> Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-07-28[SCSI] zfcp: Do not try "forced close" when port is already closedChristof Schmitt
When the port is already "physically closed" try the reopen instead. There is no way to send a "physically close" to an already closed port. Reviewed-by: Swen Schillig <swen@vnet.ibm.com> Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-07-28[SCSI] zfcp: Do not unblock rport from REOPEN_PORT_FORCEDChristof Schmitt
When the REOPEN_PORT_FORCED erp action succeeds, the port has been closed. A REOPEN_PORT will try to open the port after the REPORT_PORT_FORCED. The rport should only be unblocked after the successful completion of the reopen port. Reviewed-by: Swen Schillig <swen@vnet.ibm.com> Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-07-23qeth: avoid useless removal of multicast addressesUrsula Braun
Function qeth_l2_remove_device invokes qeth_l2_del_all_mc at the end. This is needless, because it is already called in the offline function. And even more this is invalid, because multicast addresses cannot be removed in DOWN state. Thus this patch deletes invocation of qeth_l2_del_all_mc in function qeth_l2_remove_device. Signed-off-by: Ursula Braun <ursula.braun@de.ibm.com> Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-23qeth: Use memdup_user when user data is immediately copied into the ↵Julia Lawall
allocated region. The semantic patch that makes this change is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ expression from,to,size,flag; position p; identifier l1,l2; @@ - to = \(kmalloc@p\|kzalloc@p\)(size,flag); + to = memdup_user(from,size); if ( - to==NULL + IS_ERR(to) || ...) { <+... when != goto l1; - -ENOMEM + PTR_ERR(to) ...+> } - if (copy_from_user(to, from, size) != 0) { - <+... when != goto l2; - -EFAULT - ...+> - } // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-23qeth: return zero from reply callback functionsUrsula Braun
Reply callback functions in qeth should return zero if command response consists of one part only, otherwise qeth continues waiting for further parts of the command response. Signed-off-by: Ursula Braun <ursula.braun@de.ibm.com> Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-23claw: A claw device is a group of just 2 ccw devicesUrsula Braun
When creating a claw device, just 2 subchannels have to be grouped. Signed-off-by: Ursula Braun <ursula.braun@de.ibm.com> Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-23qeth: avoid loop if ipa command response is missingUrsula Braun
If qeth issues an ipa command, but for some reasons the response never comes back, qeth reaches a timeout. Reset the irq_pending flag of the write channel in timeout handling code and trigger a recovery to avoid endless looping for the following ipa command. Signed-off-by: Ursula Braun <ursula.braun@de.ibm.com> Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-23qeth: serialize sysfs-triggered device configurationsUrsula Braun
This patch serializes device removal and other sysfs-triggered configurations by moving removal of sysfs-attributes to the beginning of the remove functions. And it serializes online/offline setting and discipline-switching (causing reestablishing of the net_device) by making use of a new discipline mutex. Signed-off-by: Ursula Braun <ursula.braun@de.ibm.com> Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-23qeth: Clear mac_bits field when switching between Layer 2 and Layer 3Carsten Otte
This patch fixes a problem that occurs when switching from layer 3 to layer 2 mode. Resetting this mac_bits makes sure that we retrieve our mac address from the card, otherwise the interface simply would'nt work. Signed-off-by: Carsten Otte <cotte@de.ibm.com> Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-23qeth: IP address takeover flag settingKlaus-Dieter Wacker
The qeth IP address flag setting is possible when device is offline. When setting device online afterwards the current set IP addresses have to be correctly registered with the device regarding the IP address takeover attribute. Signed-off-by: Klaus-Dieter Wacker <kdwacker@de.ibm.com> Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>