aboutsummaryrefslogtreecommitdiff
path: root/drivers/scsi/libsas/sas_event.c
AgeCommit message (Collapse)Author
2012-08-24[SCSI] libsas: suspend / resume supportDan Williams
libsas power management routines to suspend and recover the sas domain based on a model where the lldd is allowed and expected to be "forgetful". sas_suspend_ha - disable event processing allowing the lldd to take down links without concern for causing hotplug events. Regardless of whether the lldd actually posts link down messages libsas notifies the lldd that all domain_devices are gone. sas_prep_resume_ha - on the way back up before the lldd starts link training clean out any spurious events that were generated on the way down, and re-enable event processing sas_resume_ha - after the lldd has started and decided that all phys have posted link-up events this routine is called to let libsas start it's own timeout of any phys that did not resume. After the timeout an lldd can cancel the phy teardown by posting a link-up event. Storage for ex_change_count (u16) and phy_change_count (u8) are changed to int so they can be set to -1 to indicate 'invalidated'. Signed-off-by: Dan Williams <dan.j.williams@intel.com> Reviewed-by: Jacek Danecki <jacek.danecki@intel.com> Tested-by: Maciej Patelczyk <maciej.patelczyk@intel.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-07-20[SCSI] libata, libsas: introduce sched_eh and end_eh port opsDan Williams
When managing shost->host_eh_scheduled libata assumes that there is a 1:1 shost-to-ata_port relationship. libsas creates a 1:N relationship so it needs to manage host_eh_scheduled cumulatively at the host level. The sched_eh and end_eh port port ops allow libsas to track when domain devices enter/leave the "eh-pending" state under ha->lock (previously named ha->state_lock, but it is no longer just a lock for ha->state changes). Since host_eh_scheduled indicates eh without backing commands pinning the device it can be deallocated at any time. Move the taking of the domain_device reference under the port_lock to guarantee that the ata_port stays around for the duration of eh. Reviewed-by: Jacek Danecki <jacek.danecki@intel.com> Acked-by: Jeff Garzik <jgarzik@redhat.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-04-23[SCSI] libsas: introduce sas_work to fix sas_drain_work vs sas_queue_workDan Williams
When requeuing work to a draining workqueue the last work instance may not be idle, so sas_queue_work() must not touch work->entry. Introduce sas_work with a drain_node list_head to have a private list for collecting work deferred due to drain collision. Fixes reports like: BUG: unable to handle kernel NULL pointer dereference at (null) IP: [<ffffffff810410d4>] process_one_work+0x2e/0x338 Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-02-29[SCSI] libsas: fix sas_unregister_ports vs sas_drain_workDan Williams
We need to hold drain_mutex across the unregistration as port down events queue device removal as chained events, so we need to make sure no other drainers are active. [ 1118.673968] WARNING: at kernel/workqueue.c:996 __queue_work+0x11a/0x326() [ 1118.681982] Hardware name: S2600CP [ 1118.686193] Modules linked in: isci(-) libsas scsi_transport_sas nls_utf8 ipv6 uinput sg iTCO_wdt iTCO_vendor_support i2c_i801 i2c_core ioatdma dca sd_mod sr_mod cdrom ahci libahci libata [last unloaded: scsi_transport_sas] [ 1118.709893] Pid: 6831, comm: rmmod Not tainted 3.2.0-isci+ #1 [ 1118.716727] Call Trace: [ 1118.719867] [<ffffffff8103e9f5>] warn_slowpath_common+0x85/0x9d [ 1118.727000] [<ffffffff8103ea27>] warn_slowpath_null+0x1a/0x1c [ 1118.733942] [<ffffffff81056d44>] __queue_work+0x11a/0x326 [ 1118.740481] [<ffffffff81056f99>] queue_work_on+0x1b/0x22 [ 1118.746925] [<ffffffff81057106>] queue_work+0x37/0x3e [ 1118.753105] [<ffffffffa0120e05>] ? sas_discover_event+0x55/0x82 [libsas] [ 1118.761094] [<ffffffff813217c3>] scsi_queue_work+0x42/0x44 [ 1118.767717] [<ffffffffa0120e19>] sas_discover_event+0x69/0x82 [libsas] [ 1118.775509] [<ffffffffa0120f5b>] sas_unregister_dev+0xc3/0xcc [libsas] [ 1118.783319] [<ffffffffa0120fae>] sas_unregister_domain_devices+0x4a/0xc8 [libsas] [ 1118.792731] [<ffffffffa0120071>] sas_deform_port+0x60/0x1a6 [libsas] [ 1118.800339] [<ffffffffa01201ea>] sas_unregister_ports+0x33/0x44 [libsas] [ 1118.808342] [<ffffffffa011f7e5>] sas_unregister_ha+0x41/0x6b [libsas] [ 1118.816055] [<ffffffffa0134055>] isci_unregister+0x22/0x4d [isci] [ 1118.823384] [<ffffffffa0143040>] isci_pci_remove+0x2e/0x60 [isci] Reported-by: Jacek Danecki <jacek.danecki@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-02-19[SCSI] libsas: perform sas-transport resets in shost->workq contextDan Williams
Extend the sas transport class to allow transport users to attach extra data to a sas_phy (->hostdata). Use this area in libsas to move resets to workq context in preparation for scheduling ata device resets through libata-eh. Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-02-19[SCSI] libsas: prevent domain rediscovery competing with ata error handlingDan Williams
libata error handling provides for a timeout for link recovery. libsas must not rescan for previously known devices in this interval otherwise it may remove a device that is simply waiting for its link to recover. Let libata-eh make the determination of when the link is stable and prevent libsas (host workqueue) from taking action while this determination is pending. Using a mutex (ha->disco_mutex) to flush and disable revalidation while eh is running requires any discovery action that may block on eh be moved to its own context outside the lock. Probing ATA devices explicitly waits on ata-eh and the cache-flush-io issued during device removal may also pend awaiting eh completion. Essentially any rphy add/remove activity needs to run outside the lock. This adds two new cleanup states for sas_unregister_domain_devices() 'allocated-but-not-probed', and 'flagged-for-destruction'. In the 'allocated-but-not-probed' state dev->rphy points to a rphy that is known to have not been through a sas_rphy_add() event. At domain teardown check if this device is still pending probe and cleanup accordingly. Similarly if a device has already been queued for removal then sas_unregister_domain_devices has nothing to do. Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-02-19[SCSI] libsas: introduce sas_drain_work()Dan Williams
When an lldd invokes ->notify_port_event() it can trigger a chain of libsas events to: 1/ form the port and find the direct attached device 2/ if the attached device is an expander perform domain discovery A call to flush_workqueue() will only flush the initial port formation work. Currently libsas users need to call scsi_flush_work() up to the max depth of chain (which will grow from 2 to 3 when ata discovery is moved to its own discovery event). Instead of open coding multiple calls switch to use drain_workqueue() to flush sas work. drain_workqueue() does not handle new work submitted during the drain so libsas needs a bit of infrastructure to hold off unchained work submissions while a drain is in flight. A lldd ->notify() event is considered 'unchained' while a sas_discover_event() is 'chained'. As Tejun notes: "For now, I think it would be best to add private wrapper in libsas to support deferring unchained work items while draining." Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-02-19[SCSI] libsas: replace event locks with atomic bitopsDan Williams
The locks only served to make sure the pending event bitmask was updated consistently. Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2007-01-13[SCSI] libsas: Add SAS_HA state flags to avoid queueing events while unloadingDarrick J. Wong
Track sas_ha_struct state so that we ignore events that come in while we're shutting things down. Signed-off-by: Malahal Naineni <malahal@us.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-11-22WorkStruct: make allyesconfigDavid Howells
Fix up for make allyesconfig. Signed-Off-By: David Howells <dhowells@redhat.com>
2006-08-29[SCSI] aic94xx: new driverJames Bottomley
This is the end point of the separate aic94xx driver based on the original driver and transport class from Luben Tuikov <ltuikov@yahoo.com> The log of the separate development is: Alexis Bruemmer: o aic94xx: fix hotplug/unplug for expanderless systems o aic94xx: disable split completion timer/setting by default o aic94xx: wide port off expander support o aic94xx: remove various inline functions o aic94xx: use bitops o aic94xx: remove queue comment o aic94xx: remove sas_common.c o aic94xx: sas remove depot's o aic94xx: use available list_for_each_entry_safe_reverse() o aic94xx: sas header file merge James Bottomley: o aic94xx: fix TF_TMF_NO_CTX processing o aic94xx: convert to request_firmware interface o aic94xx: fix hotplug/unplug o aic94xx: add link error counts to the expander phys o aic94xx: add transport class phy reset capability o aic94xx: remove local_attached flag o Remove README o Fixup Makefile variable for libsas rename o Rename sas->libsas o aic94xx: correct return code for sas_discover_event o aic94xx: use parent backlink port o aic94xx: remove channel abstraction o aic94xx: fix routing algorithms o aic94xx: add backlink port o aic94xx: fix cascaded expander properties o aic94xx: fix sleep under lock o aic94xx: fix panic on module removal in complex topology o aic94xx: make use of the new sas_port o rename sas_port to asd_sas_port o Fix for eh_strategy_handler move o aic94xx: move entirely over to correct transport class formulation o remove last vestages of sas_rphy_alloc() o update for eh_timed_out move o Preliminary expander support for aic94xx o sas: remove event thread o minor warning cleanups o remove last vestiges of id mapping arrays o Further updates o Convert aic94xx over entirely to the transport class end device and o update aic94xx/sas to use the new sas transport class end device o [PATCH] aic94xx: attaching to the sas transport class o Add missing completion removal from prior patch o [PATCH] aic94xx: attaching to the sas transport class o Build fixes from akpm Jeff Garzik: o [scsi aic94xx] Remove ->owner from PCI info table Luben Tuikov: o initial aic94xx driver Mike Anderson: o aic94xx: fix panic on module insertion o aic94xx: stub out SATA_DEV case o aic94xx: compile warning cleanups o aic94xx: sas_alloc_task o aic94xx: ref count update o aic94xx nexus loss time value o [PATCH] aic94xx: driver assertion in non-x86 BIOS env Randy Dunlap: o libsas: externs not needed Robert Tarte: o aic94xx: sequence patch - fixes SATA support Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>