aboutsummaryrefslogtreecommitdiff
path: root/drivers/staging
AgeCommit message (Collapse)Author
2013-10-23Merge branch 'v4l_for_linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media Pull media fixes from Mauro Carvalho Chehab: - Compilation fixes for GCC < 4.4.6 - one Kbuild dependency select fix (selecting videobuf on msi3101) - driver fixes on tda10071, e4000, msi3101, soc_camera, s5p-jpeg, saa7134 and adv7511 - some device quirks needed to make them work properly - some videobuf2 core regression fixes for some features used only on embedded drivers * 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: [media] saa7134: Fix crash when device is closed before streamoff [media] adv7511: fix error return code in adv7511_probe() [media] ths8200: fix compilation with GCC < 4.4.6 [media] ad9389b: fix compilation with GCC < 4.4.6 [media] adv7511: fix compilation with GCC < 4.4.6 [media] adv7842: fix compilation with GCC < 4.4.6 [media] s5p-jpeg: Initialize vfd_decoder->vfl_dir field [media] videobuf2-dc: Fix support for mappings without struct page in userptr mode [media] vb2: Allow queuing OUTPUT buffers with zeroed 'bytesused' [media] mx3-camera: locking cleanup in mx3_videobuf_queue() [media] sh_vou: almost forever loop in sh_vou_try_fmt_vid_out() [media] tda10071: change firmware download condition [media] msi3101: correct max videobuf2 alloc [media] Add HCL T12Rg-H to STK webcam upside-down table [media] msi3101: Kconfig select VIDEOBUF2_VMALLOC [media] msi3101: msi3101_ioctl_ops can be static [media] e4000: fix PLL calc bug on 32-bit arch [media] uvcvideo: quirk PROBE_DEF for Microsoft Lifecam NX-3000 [media] uvcvideo: quirk PROBE_DEF for Dell SP2008WFP monitor
2013-10-03staging: comedi: ni_65xx: (bug fix) confine insn_bits to one subdeviceIan Abbott
The `insn_bits` handler `ni_65xx_dio_insn_bits()` has a `for` loop that currently writes (optionally) and reads back up to 5 "ports" consisting of 8 channels each. It reads up to 32 1-bit channels but can only read and write a whole port at once - it needs to handle up to 5 ports as the first channel it reads might not be aligned on a port boundary. It breaks out of the loop early if the next port it handles is beyond the final port on the card. It also breaks out early on the 5th port in the loop if the first channel was aligned. Unfortunately, it doesn't check that the current port it is dealing with belongs to the comedi subdevice the `insn_bits` handler is acting on. That's a bug. Redo the `for` loop to terminate after the final port belonging to the subdevice, changing the loop variable in the process to simplify things a bit. The `for` loop could now try and handle more than 5 ports if the subdevice has more than 40 channels, but the test `if (bitshift >= 32)` ensures it will break out early after 4 or 5 ports (depending on whether the first channel is aligned on a port boundary). (`bitshift` will be between -7 and 7 inclusive on the first iteration, increasing by 8 for each subsequent operation.) Signed-off-by: Ian Abbott <abbotti@mev.co.uk> Cc: <stable@vger.kernel.org> # 3.10.y 3.11.y 3.12.y Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-09-26staging: r8188eu: Add new device IDLarry Finger
The DLink DWA-125 Rev D1 also uses this driver. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Reported-by: Sergey Kostanbaev <sergey.kostanbaev@gmail.com> Tested-by: Sergey Kostanbaev <sergey.kostanbaev@gmail.com> Cc: Sergey Kostanbaev <sergey.kostanbaev@gmail.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-09-25staging: imx-drm: Fix probe failureFabio Estevam
Since commit b5dc0d10 (drm/imx: kill firstopen callback) the following probe failure is seen: [drm] Supports vblank timestamp caching Rev 1 (10.10.2010). [drm] No driver support for vblank timestamp query. [drm] Initialized imx-drm 1.0.0 20120507 on minor 0 imx-ldb ldb.10: adding encoder failed with -16 imx-ldb: probe of ldb.10 failed with error -16 imx-ipuv3 2400000.ipu: IPUv3H probed imx-ipuv3 2800000.ipu: IPUv3H probed imx-ipuv3-crtc imx-ipuv3-crtc.0: adding crtc failed with -16. imx-ipuv3-crtc: probe of imx-ipuv3-crtc.0 failed with error -16 imx-ipuv3-crtc imx-ipuv3-crtc.1: adding crtc failed with -16. imx-ipuv3-crtc: probe of imx-ipuv3-crtc.1 failed with error -16 imx-ipuv3-crtc imx-ipuv3-crtc.2: adding crtc failed with -16. imx-ipuv3-crtc: probe of imx-ipuv3-crtc.2 failed with error -16 imx-ipuv3-crtc imx-ipuv3-crtc.3: adding crtc failed with -16. imx-ipuv3-crtc: probe of imx-ipuv3-crtc.3 failed with error -16 The reason for the probe failure is that now 'imxdrm->references' is incremented early in imx_drm_driver_load(), so the following checks in imx_drm_add_crtc() and imx_drm_add_encoder(): if (imxdrm->references) { ret = -EBUSY; goto err_busy; } ,will always fail. Instead of manually keeping the references in the imx-drm driver, let's use drm->open_count. After this patch, lvds panel is functional on a mx6qsabrelite board. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-09-25staging: vt6656: [BUG] iwctl_siwencodeext return if device not openMalcolm Priestley
Don't allow entry to iwctl_siwencodeext if device not open. This fixes a race condition where wpa supplicant/network manager enters the function when the device is already closed. Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com> Cc: stable@vger.kernel.org # 3.8+ Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-09-25staging: vt6656: [BUG] main_usb.c oops on device_close move flag earlier.Malcolm Priestley
The vt6656 is prone to resetting on the usb bus. It seems there is a race condition and wpa supplicant is trying to open the device via iw_handlers before its actually closed at a stage that the buffers are being removed. The device is longer considered open when the buffers are being removed. So move ~DEVICE_FLAGS_OPENED flag to before freeing the device buffers. Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com> Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-09-25staging: vt6656: rxtx.c [BUG] s_vGetFreeContext dead lock on null apTD.Malcolm Priestley
There seems to be race condition that the device is ndo_start_xmit at a point where the device is closing and apTD is NULL resulting in dead lock. Add a NULL check to apTD and return NULL to calling functions. This is more likely on 64 bit systems. Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-09-25Staging: rtl8192u: r819xU_cmdpkt: checking NULL value after doing dev_alloc_skbIker Pedrosa
Checking the return of dev_alloc_skb as stated in the following bug: https://bugzilla.kernel.org/show_bug.cgi?id=60411 Signed-off-by: Iker Pedrosa <ikerpedrosam@gmail.com> Reported-by: RUC_Soft_Sec rucsoftsec@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-09-25staging: r8188eu: Add files for new drive: Cocci spatch "noderef"Thomas Meyer
sizeof when applied to a pointer typed expression gives the size of the pointer. Found by coccinelle spatch "misc/noderef.cocci" Signed-off-by: Thomas Meyer <thomas@m3y3r.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-09-25staging: r8188eu: Cocci spatch "noderef"Thomas Meyer
sizeof when applied to a pointer typed expression gives the size of the pointer. Found by coccinelle spatch "misc/noderef.cocci" Signed-off-by: Thomas Meyer <thomas@m3y3r.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-09-25staging: octeon-usb: Cocci spatch "noderef"Thomas Meyer
sizeof when applied to a pointer typed expression gives the size of the pointer. Found by coccinelle spatch "misc/noderef.cocci" Signed-off-by: Thomas Meyer <thomas@m3y3r.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-09-25staging: r8188eu: Add files for new drive: Cocci spatch "noderef"Thomas Meyer
sizeof when applied to a pointer typed expression gives the size of the pointer. Found by coccinelle spatch "misc/noderef.cocci" Signed-off-by: Thomas Meyer <thomas@m3y3r.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-09-25staging: lustre: Cocci spatch "noderef"Thomas Meyer
sizeof when applied to a pointer typed expression gives the size of the pointer. Found by coccinelle spatch "misc/noderef.cocci" Signed-off-by: Thomas Meyer <thomas@m3y3r.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-09-24[media] msi3101: correct max videobuf2 allocAntti Palosaari
There was too small buffers requested in worst case. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2013-09-24[media] msi3101: Kconfig select VIDEOBUF2_VMALLOCAntti Palosaari
[linuxtv-media:master 395/499] sdr-msi3101.c:undefined reference to `vb2_vmalloc_memops' Reported-by: kbuild test robot <fengguang.wu@intel.com> Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2013-09-24[media] msi3101: msi3101_ioctl_ops can be staticFengguang Wu
Signed-off-by: Fengguang Wu <fengguang.wu@intel.com> Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2013-09-18staging: iio: ade7854-spi: Fix return valueSachin Kamat
ade7854_probe can fail. Return the value obtained from it instead of 0 (success). Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Cc: Barry Song <21cnbao@gmail.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2013-09-18staging:iio:hmc5843: Fix measurement conversionPeter Meerwald
recently broken, cd6fe06588423ff4cca85c85c4402027b04dccf1 staging:iio:hmc5843: Use i2c_smbus_read_word_swapped() Signed-off-by: Peter Meerwald <pmeerw@pmeerw.net> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2013-09-18iio: isl29018: Fix uninitialized valueDerek Basehore
The lux_uscale value is not initialized at probe. The value will be uninitialized unless a value is written to it through the iio channel interface. This fixes that. Signed-off-by: Derek Basehore <dbasehore@chromium.org> Reviewed-on: https://gerrit.chromium.org/gerrit/65998 Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2013-09-18staging:iio:dummy fix kfifo_buf kconfig dependency issue if kfifo modular ↵Jonathan Cameron
and buffer enabled for built in dummy driver. This only occurs in the unlikely event that the example driver is built in whilst the buffer implementation is not. Solved by switching from a depends on to a select for this particular case. Reported-by: Fengguang Wu <fengguang.wu@intel.com> Reported-by: Randy Dunlap <rdunlap@infradead.org> Acked-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2013-09-17staging: line6: add bounds check in snd_toneport_source_put()Dan Carpenter
"source" comes from the user in snd_ctl_elem_write() so it needs to be checked. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Stefan Hajnoczi <stefanha@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-09-17Staging: comedi: Fix dependencies for drivers misclassified as PCIBen Hutchings
The Fastwel UNIOxx-5 is a PC/104 board, so put COMEDI_UNIOXX5 under COMEDI_ISA_DRIVERS. The DIL/Net-PC 1486 is a 486 system, so put COMEDI_SSV_DNP under COMEDI_MISC_DRIVERS and add a dependency on X86_32 || COMPILE_TEST. Reviewed-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-09-17staging: r8188eu: Adjust RX gainLarry Finger
In some circumstances, the performance of this driver is highly degraded, and ifconfig reports large numbers of dropped packets. By increasing the maximum RX gain from 0x3e to 0x4e, performance is greatly improved. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-09-17staging: r8188eu: Fix smatch warning in core/rtw_ieee80211.Larry Finger
Smatch shows the following warning: drivers/staging/rtl8188eu/core/rtw_ieee80211.c:161 rtw_set_ie() info: ignoring unreachable code. The cause is a module exit tracing statement after a return. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-09-17staging: r8188eu: Fix smatch error in core/rtw_mlme_ext.cLarry Finger
Smatch reports the following warning: "drivers/staging/rtl8188eu/core/rtw_mlme_ext.c:8328 mlme_evt_hdl() error: buffer overflow 'wlanevents' 24 <= 24" 8321 /* checking if event code is valid */ 8322 if (evt_code >= MAX_C2HEVT) { ^^^^^^^^^^^^^^^^^^^^^^ 8323 RT_TRACE(_module_rtl871x_cmd_c_, _drv_err_, ("\nEvent Code(%d) mismatch!\n", evt_code)); 8324 goto _abort_event_; 8325 } 8326 8327 /* checking if event size match the event parm size */ 8328 if ((wlanevents[evt_code].parmsize != 0) && ^^^^^^^^^^^^^^^^^^^^ 8329 (wlanevents[evt_code].parmsize != evt_sz)) { 8330 RT_TRACE(_module_rtl871x_cmd_c_, _drv_err_, 8331 ("\nEvent(%d) Parm Size mismatch (%d vs %d)!\n", 8332 evt_code, wlanevents[evt_code].parmsize, evt_sz)); 8333 goto _abort_event_; 8334 } This warning results because the number of items in "enum rtw_c2h_event", which determines the value of MAX_C2HEVT, is one more than in "struct wlanevents". Adding an extra dummy event to the latter fixes the problem. Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-09-17staging: r8188eu: Fix Smatch off-by-one warning in hal/rtl8188e_hal_init.cLarry Finger
Smatch reports the following warning: "drivers/staging/rtl8188eu/hal/rtl8188e_hal_init.c:2008 Hal_ReadPowerValueFromPROM_8188E() error: buffer overflow 'pwrInfo24G->IndexBW40_Base[rfPath]' 5 <= 5" drivers/staging/rtl8188eu/hal/rtl8188e_hal_init.c 2005 /* 2.4G default value */ 2006 for (group = 0; group < MAX_CHNL_GROUP_24G; group++) { 2007 pwrInfo24G->IndexCCK_Base[rfPath][group] = EEPROM_DEFAULT_24G_INDEX; 2008 pwrInfo24G->IndexBW40_Base[rfPath][group] = EEPROM_DEFAULT_24G_INDEX; The reason is that IndexCCK_Base[] has MAX_CHNL_GROUP_24G elements, but IndexBW40_Base is smaller by 1. Make them both have MAX_CHNL_GROUP_24G elements. Reported by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-09-17staging: Disable lustre file system for MIPS, SH, and XTENSAGuenter Roeck
mips allmodconfig fails with ERROR: "copy_from_user_page" [drivers/staging/lustre/lustre/libcfs/libcfs.ko] undefined! which is due to LUSTRE using copy_from_user_page which is not exported by any architecture. Unfortunately, LUSTRE can only be built as module, so there is no easy fix. MIPS, SH, and optionally XTENSA implement copy_from_user_page as unexported functions. Disable LUSTRE for those. Cc: Peng Tao <bergwolf@gmail.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-09-17Revert "staging: zram: Add auto loading of module if user opens /dev/zram."Greg Kroah-Hartman
This reverts commit c70bda992c12e593e411c02a52e4bd6985407539. It's incorrect, Kay writes: Please just remove it. "devname" is meant to be used for single-instance devices with a static dev_t, never for things like zramX. It will not do anything useful here, it does nothing really without a statically assigned dev_t, and it should not be used for devices of this kind anyway. Reported-by: Tom Gundersen <teg@jklm.no> Reported-by: Kay Sievers <kay@vrfy.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-09-17staging: octeon-ethernet: rgmii: enable interrupts that we can handleAaro Koskinen
Enable only those interrupts that we can handle & acknowledge in the interrupt handler. At least on EdgeRouter Lite, the hardware may occasionally interrupt with some error condition when the physical link status changes frequently. Since the interrupt condition is not acked properly, this leads to the following warning and the IRQ gets disabled completely: [ 41.324700] eth0: Link down [ 44.324721] eth0: 1000 Mbps Full duplex, port 0, queue 0 [ 44.885590] irq 117: nobody cared (try booting with the "irqpoll" option) [ 44.892397] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 3.11.0-rc5-edge-los.git-27d042f-dirty-00950-gaa42f2d-dirty #8 [ 44.902825] Stack : ffffffff815c0000 0000000000000004 0000000000000003 0000000000000000 ffffffff81fd0000 ffffffff815c0000 0000000000000004 ffffffff8118530c ffffffff815c0000 ffffffff811858d8 0000000000000000 0000000000000000 ffffffff81fd0000 ffffffff81fc0000 ffffffff8152f3a0 ffffffff815b7bf7 ffffffff81fc6688 ffffffff815b8060 0000000000000000 0000000000000000 0000000000000000 ffffffff815346c8 ffffffff815346b0 ffffffff814a6a18 ffffffff8158b848 ffffffff81145614 ffffffff81593800 ffffffff81187174 ffffffff815b7d00 ffffffff8158b760 0000000000000000 ffffffff814a9184 0000000000000000 0000000000000000 0000000000000000 0000000000000000 0000000000000000 ffffffff811203b8 0000000000000000 0000000000000000 ... [ 44.968408] Call Trace: [ 44.970873] [<ffffffff811203b8>] show_stack+0x68/0x80 [ 44.975937] [<ffffffff814a9184>] dump_stack+0x78/0xb8 [ 44.980999] [<ffffffff811aac54>] __report_bad_irq+0x44/0x108 [ 44.986662] [<ffffffff811ab238>] note_interrupt+0x248/0x2a0 [ 44.992240] [<ffffffff811a85e4>] handle_irq_event_percpu+0x144/0x200 [ 44.998598] [<ffffffff811a86f4>] handle_irq_event+0x54/0x90 [ 45.004176] [<ffffffff811ab908>] handle_level_irq+0xd0/0x148 [ 45.009839] [<ffffffff811a7b04>] generic_handle_irq+0x34/0x50 [ 45.015589] [<ffffffff8111dae8>] do_IRQ+0x18/0x30 [ 45.020301] [<ffffffff8110486c>] plat_irq_dispatch+0x74/0xb8 [ 45.025958] [ 45.027451] handlers: [ 45.029731] [<ffffffff813fca10>] cvm_oct_rgmii_rml_interrupt [ 45.035397] Disabling IRQ #117 [ 45.038742] Port 0 receive error code 13, packet dropped [ 46.324719] eth0: Link down [ 48.324733] eth0: 1000 Mbps Full duplex, port 0, queue 0 Reported-by: "Jason A. Donenfeld" <Jason@zx2c4.com> Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi> Acked-by: David Daney <david.daney@cavium.com> Acked-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-09-17staging: octeon-ethernet: remove skb alloc failure warningsAaro Koskinen
Remove skb allocation failure warnings. They will trigger a page allocation warning already. Also, one of the warnings was not ratelimited, causing the box to lock up under heavy traffic & low memory. Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi> Acked-by: David Daney <david.daney@cavium.com> Acked-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-09-17staging: octeon-ethernet: make dropped packets to consume NAPI budgetAaro Koskinen
We should count also dropped packets, otherwise the NAPI handler may end up running too long. Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi> Acked-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-09-17drivers/staging/lustre/lustre/ptlrpc/sec_bulk.c: rename PTRS_PER_PAGEAndrew Morton
It duplicates the definition in arch/alpha/include/asm/pgtable.h and emits warnings. Cc: Andreas Dilger <andreas.dilger@intel.com> Cc: Peng Tao <tao.peng@emc.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-09-17staging: dgnc: fix potential format string flawKees Cook
Make sure that format strings cannot leak into printk() calls from the msgbuf string. Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-09-17staging: lustre: clean up format string usagesKees Cook
This fixes up the usage of snprintf, strncpy, and format strings in the call to kthread_run to avoid ever accidentally allowing a format string into the thread name. Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-09-17staging: dgap: fix overflows and format stringsKees Cook
The boot message buffer could potentially overflow the stack and the heap. Additionally make sure format strings could not leak into printk() calls. Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-09-17staging: xillybus: fix format string usageKees Cook
Makes sure format string cannot leak into device_create() call. Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-09-17staging: r8188eu: Fix uninitialized variable change_inxGeert Uytterhoeven
drivers/staging/rtl8188eu/core/rtw_wlan_util.c: In function ‘WMMOnAssocRsp’: drivers/staging/rtl8188eu/core/rtw_wlan_util.c:634: warning: ‘change_inx’ may be used uninitialized in this function And the compiler is right: change_inx should be initialized to false. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-09-17staging/lustre: Correct default for LUSTRE_TRANSLATE_ERRNOSGeert Uytterhoeven
LUSTRE_TRANSLATE_ERRNOS is never enabled, a "true" is not a valid value. Use "default y" instead of "default true" to fix this. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-09-17staging/vt6656: Fix screwed up indentation in swGetOFDMControlRateDave Jones
The indentation in the swGetOFDMControlRate function is screwed up. At first it appears that there are missing braces on a multi-line if, but looking at history, commit dd0a774fc727ee793780197beb3f2cf80bfefa99 ("staging: vt6656: card/main_usb/device use new structure names") incorrectly indented the two lines below. Signed-off-by: Dave Jones <davej@fedoraproject.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-09-17staging/rtl8188eu: pass channel list by reference instead of copying struct.Dave Jones
Signed-off-by: Dave Jones <davej@fedoraproject.org> Acked-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-09-13Merge git://git.kvack.org/~bcrl/aio-nextLinus Torvalds
Pull aio changes from Ben LaHaise: "First off, sorry for this pull request being late in the merge window. Al had raised a couple of concerns about 2 items in the series below. I addressed the first issue (the race introduced by Gu's use of mm_populate()), but he has not provided any further details on how he wants to rework the anon_inode.c changes (which were sent out months ago but have yet to be commented on). The bulk of the changes have been sitting in the -next tree for a few months, with all the issues raised being addressed" * git://git.kvack.org/~bcrl/aio-next: (22 commits) aio: rcu_read_lock protection for new rcu_dereference calls aio: fix race in ring buffer page lookup introduced by page migration support aio: fix rcu sparse warnings introduced by ioctx table lookup patch aio: remove unnecessary debugging from aio_free_ring() aio: table lookup: verify ctx pointer staging/lustre: kiocb->ki_left is removed aio: fix error handling and rcu usage in "convert the ioctx list to table lookup v3" aio: be defensive to ensure request batching is non-zero instead of BUG_ON() aio: convert the ioctx list to table lookup v3 aio: double aio_max_nr in calculations aio: Kill ki_dtor aio: Kill ki_users aio: Kill unneeded kiocb members aio: Kill aio_rw_vect_retry() aio: Don't use ctx->tail unnecessarily aio: io_cancel() no longer returns the io_event aio: percpu ioctx refcount aio: percpu reqs_available aio: reqs_active -> reqs_available aio: fix build when migration is disabled ...
2013-09-10staging/lustre/libcfs: cleanup linux-mem.hPeng Tao
remove shrinker related wrappers. Signed-off-by: Peng Tao <tao.peng@emc.com> Signed-off-by: Andreas Dilger <andreas.dilger@intel.com> Cc: Michal Hocko <mhocko@suse.cz> Cc: Dave Chinner <dchinner@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-09-10staging/lustre/ptlrpc: convert to new shrinker APIPeng Tao
Convert sptlrpc encode pool shrinker to use scan/count API. Signed-off-by: Peng Tao <tao.peng@emc.com> Signed-off-by: Andreas Dilger <andreas.dilger@intel.com> Cc: Michal Hocko <mhocko@suse.cz> Cc: Dave Chinner <dchinner@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-09-10staging/lustre/obdclass: convert lu_object shrinker to count/scan APIPeng Tao
convert lu_object shrinker to new count/scan API. Signed-off-by: Peng Tao <tao.peng@emc.com> Signed-off-by: Andreas Dilger <andreas.dilger@intel.com> Cc: Michal Hocko <mhocko@suse.cz> Cc: Dave Chinner <dchinner@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-09-10staging/lustre/ldlm: convert to shrinkers to count/scan APIPeng Tao
convert ldlm shrinker to new count/scan API. Signed-off-by: Peng Tao <tao.peng@emc.com> Signed-off-by: Andreas Dilger <andreas.dilger@intel.com> Cc: Michal Hocko <mhocko@suse.cz> Cc: Dave Chinner <dchinner@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-09-10drivers: convert shrinkers to new count/scan APIDave Chinner
Convert the driver shrinkers to the new API. Most changes are compile tested only because I either don't have the hardware or it's staging stuff. FWIW, the md and android code is pretty good, but the rest of it makes me want to claw my eyes out. The amount of broken code I just encountered is mind boggling. I've added comments explaining what is broken, but I fear that some of the code would be best dealt with by being dragged behind the bike shed, burying in mud up to it's neck and then run over repeatedly with a blunt lawn mower. Special mention goes to the zcache/zcache2 drivers. They can't co-exist in the build at the same time, they are under different menu options in menuconfig, they only show up when you've got the right set of mm subsystem options configured and so even compile testing is an exercise in pulling teeth. And that doesn't even take into account the horrible, broken code... [glommer@openvz.org: fixes for i915, android lowmem, zcache, bcache] Signed-off-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Glauber Costa <glommer@openvz.org> Acked-by: Mel Gorman <mgorman@suse.de> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Kent Overstreet <koverstreet@google.com> Cc: John Stultz <john.stultz@linaro.org> Cc: David Rientjes <rientjes@google.com> Cc: Jerome Glisse <jglisse@redhat.com> Cc: Thomas Hellstrom <thellstrom@vmware.com> Cc: "Theodore Ts'o" <tytso@mit.edu> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Cc: Arve Hjønnevåg <arve@android.com> Cc: Carlos Maiolino <cmaiolino@redhat.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Chuck Lever <chuck.lever@oracle.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: David Rientjes <rientjes@google.com> Cc: Gleb Natapov <gleb@redhat.com> Cc: Greg Thelen <gthelen@google.com> Cc: J. Bruce Fields <bfields@redhat.com> Cc: Jan Kara <jack@suse.cz> Cc: Jerome Glisse <jglisse@redhat.com> Cc: John Stultz <john.stultz@linaro.org> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Kent Overstreet <koverstreet@google.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Marcelo Tosatti <mtosatti@redhat.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Steven Whitehouse <swhiteho@redhat.com> Cc: Thomas Hellstrom <thellstrom@vmware.com> Cc: Trond Myklebust <Trond.Myklebust@netapp.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-09-10shrinker: add node awarenessDave Chinner
Pass the node of the current zone being reclaimed to shrink_slab(), allowing the shrinker control nodemask to be set appropriately for node aware shrinkers. Signed-off-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Glauber Costa <glommer@openvz.org> Acked-by: Mel Gorman <mgorman@suse.de> Cc: "Theodore Ts'o" <tytso@mit.edu> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Cc: Arve Hjønnevåg <arve@android.com> Cc: Carlos Maiolino <cmaiolino@redhat.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Chuck Lever <chuck.lever@oracle.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: David Rientjes <rientjes@google.com> Cc: Gleb Natapov <gleb@redhat.com> Cc: Greg Thelen <gthelen@google.com> Cc: J. Bruce Fields <bfields@redhat.com> Cc: Jan Kara <jack@suse.cz> Cc: Jerome Glisse <jglisse@redhat.com> Cc: John Stultz <john.stultz@linaro.org> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Kent Overstreet <koverstreet@google.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Marcelo Tosatti <mtosatti@redhat.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Steven Whitehouse <swhiteho@redhat.com> Cc: Thomas Hellstrom <thellstrom@vmware.com> Cc: Trond Myklebust <Trond.Myklebust@netapp.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-09-05Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-nextLinus Torvalds
Pull networking changes from David Miller: "Noteworthy changes this time around: 1) Multicast rejoin support for team driver, from Jiri Pirko. 2) Centralize and simplify TCP RTT measurement handling in order to reduce the impact of bad RTO seeding from SYN/ACKs. Also, when both timestamps and local RTT measurements are available prefer the later because there are broken middleware devices which scramble the timestamp. From Yuchung Cheng. 3) Add TCP_NOTSENT_LOWAT socket option to limit the amount of kernel memory consumed to queue up unsend user data. From Eric Dumazet. 4) Add a "physical port ID" abstraction for network devices, from Jiri Pirko. 5) Add a "suppress" operation to influence fib_rules lookups, from Stefan Tomanek. 6) Add a networking development FAQ, from Paul Gortmaker. 7) Extend the information provided by tcp_probe and add ipv6 support, from Daniel Borkmann. 8) Use RCU locking more extensively in openvswitch data paths, from Pravin B Shelar. 9) Add SCTP support to openvswitch, from Joe Stringer. 10) Add EF10 chip support to SFC driver, from Ben Hutchings. 11) Add new SYNPROXY netfilter target, from Patrick McHardy. 12) Compute a rate approximation for sending in TCP sockets, and use this to more intelligently coalesce TSO frames. Furthermore, add a new packet scheduler which takes advantage of this estimate when available. From Eric Dumazet. 13) Allow AF_PACKET fanouts with random selection, from Daniel Borkmann. 14) Add ipv6 support to vxlan driver, from Cong Wang" Resolved conflicts as per discussion. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1218 commits) openvswitch: Fix alignment of struct sw_flow_key. netfilter: Fix build errors with xt_socket.c tcp: Add missing braces to do_tcp_setsockopt caif: Add missing braces to multiline if in cfctrl_linkup_request bnx2x: Add missing braces in bnx2x:bnx2x_link_initialize vxlan: Fix kernel panic on device delete. net: mvneta: implement ->ndo_do_ioctl() to support PHY ioctls net: mvneta: properly disable HW PHY polling and ensure adjust_link() works icplus: Use netif_running to determine device state ethernet/arc/arc_emac: Fix huge delays in large file copies tuntap: orphan frags before trying to set tx timestamp tuntap: purge socket error queue on detach qlcnic: use standard NAPI weights ipv6:introduce function to find route for redirect bnx2x: VF RSS support - VF side bnx2x: VF RSS support - PF side vxlan: Notify drivers for listening UDP port changes net: usbnet: update addr_assign_type if appropriate driver/net: enic: update enic maintainers and driver driver/net: enic: Exposing symbols for Cisco's low latency driver ...
2013-09-05Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Conflicts: drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c net/bridge/br_multicast.c net/ipv6/sit.c The conflicts were minor: 1) sit.c changes overlap with change to ip_tunnel_xmit() signature. 2) br_multicast.c had an overlap between computing max_delay using msecs_to_jiffies and turning MLDV2_MRC() into an inline function with a name using lowercase instead of uppercase letters. 3) stmmac had two overlapping changes, one which conditionally allocated and hooked up a dma_cfg based upon the presence of the pbl OF property, and another one handling store-and-forward DMA made. The latter of which should not go into the new of_find_property() basic block. Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-05Merge branch 'v4l_for_linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media Pull media updates from Mauro Carvalho Chehab: "This series contains: - Exynos s5p-mfc driver got support for VP8 encoder - Some SoC drivers gained support for asynchronous registration (needed for DT) - The RC subsystem gained support for RC activity LED; - New drivers added: a video decoder(adv7842), a video encoder (adv7511), a new GSPCA driver (stk1135) and support for Renesas R-Car (vsp1) - the first SDR kernel driver: mirics msi3101. Due to some troubles with the driver, and because the API is still under discussion, it will be merged at staging for 3.12. Need to rework on it - usual new boards additions, fixes, cleanups and driver improvements" * 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (242 commits) [media] cx88: Fix regression: CX88_AUDIO_WM8775 can't be 0 [media] exynos4-is: Fix entity unregistration on error path [media] exynos-gsc: Register v4l2 device [media] exynos4-is: Fix fimc-lite bayer formats [media] em28xx: fix assignment of the eeprom data [media] hdpvr: fix iteration over uninitialized lists in hdpvr_probe() [media] usbtv: Throw corrupted frames away [media] usbtv: Fix deinterlacing [media] v4l2: added missing mutex.h include to v4l2-ctrls.h [media] DocBook: upgrade media_api DocBook version to 4.2 [media] ml86v7667: fix compile warning: 'ret' set but not used [media] s5p-g2d: Fix registration failure [media] media: coda: Fix DT driver data pointer for i.MX27 [media] s5p-mfc: Fix input/output format reporting [media] v4l: vsp1: Fix mutex double lock at streamon time [media] v4l: vsp1: Add support for RT clock [media] v4l: vsp1: Initialize media device bus_info field [media] davinci: vpif_capture: fix error return code in vpif_probe() [media] davinci: vpif_display: fix error return code in vpif_probe() [media] MAINTAINERS: add entries for adv7511 and adv7842 ...
generated by cgit v1.2.3 (git 2.25.1) at 2024-04-27 22:17:51 +0000