aboutsummaryrefslogtreecommitdiff
path: root/drivers/target
AgeCommit message (Collapse)Author
2014-02-06target/iscsi: Fix network portal creation raceAndy Grover
commit ee291e63293146db64668e8d65eb35c97e8324f4 upstream. When creating network portals rapidly, such as when restoring a configuration, LIO's code to reuse existing portals can return a false negative if the thread hasn't run yet and set np_thread_state to ISCSI_NP_THREAD_ACTIVE. This causes an error in the network stack when attempting to bind to the same address/port. This patch sets NP_THREAD_ACTIVE before the np is placed on g_np_list, so even if the thread hasn't run yet, iscsit_get_np will return the existing np. Also, convert np_lock -> np_mutex + hold across adding new net portal to g_np_list to prevent a race where two threads may attempt to create the same network portal, resulting in one of them failing. (nab: Add missing mutex_unlocks in iscsit_add_np failure paths) (DanC: Fix incorrect spin_unlock -> spin_unlock_bh) Signed-off-by: Andy Grover <agrover@redhat.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-01-09target/file: Update hw_max_sectors based on current block_sizeNicholas Bellinger
commit 95cadace8f3959282e76ebf8b382bd0930807d2c upstream. This patch allows FILEIO to update hw_max_sectors based on the current max_bytes_per_io. This is required because vfs_[writev,readv]() can accept a maximum of 2048 iovecs per call, so the enforced hw_max_sectors really needs to be calculated based on block_size. This addresses a >= v3.5 bug where block_size=512 was rejecting > 1M sized I/O requests, because FD_MAX_SECTORS was hardcoded to 2048 for the block_size=4096 case. (v2: Use max_bytes_per_io instead of ->update_hw_max_sectors) Reported-by: Henrik Goldman <hg@x-formation.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-01-09iscsi-target: Fix-up all zero data-length CDBs with R/W_BIT setNicholas Bellinger
commit 4454b66cb67f14c33cd70ddcf0ff4985b26324b7 upstream. This patch changes special case handling for ISCSI_OP_SCSI_CMD where an initiator sends a zero length Expected Data Transfer Length (EDTL), but still sets the WRITE and/or READ flag bits when no payload transfer is requested. Many, many moons ago two special cases where added for an ancient version of ESX that has long since been fixed, so instead of adding a new special case for the reported bug with a Broadcom 57800 NIC, go ahead and always strip off the incorrect WRITE + READ flag bits. Also, avoid sending a reject here, as RFC-3720 does mandate this case be handled without protocol error. Reported-by: Witold Bazakbal <865perl@wp.pl> Tested-by: Witold Bazakbal <865perl@wp.pl> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-12-04iscsi-target: chap auth shouldn't match username with trailing garbageEric Seppanen
commit 86784c6bdeeef78eed94d298be7a8879f6a97ee2 upstream. In iSCSI negotiations with initiator CHAP enabled, usernames with trailing garbage are permitted, because the string comparison only checks the strlen of the configured username. e.g. "usernameXXXXX" will be permitted to match "username". Just check one more byte so the trailing null char is also matched. Signed-off-by: Eric Seppanen <eric@purestorage.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-12-04iscsi-target: fix extract_param to handle buffer length corner caseEric Seppanen
commit 369653e4fb511928511b0ce81f41c812ff1f28b6 upstream. extract_param() is called with max_length set to the total size of the output buffer. It's not safe to allow a parameter length equal to the buffer size as the terminating null would be written one byte past the end of the output buffer. Signed-off-by: Eric Seppanen <eric@purestorage.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-12-04iscsi-target: Fix mutex_trylock usage in iscsit_increment_maxcmdsnNicholas Bellinger
commit 5e8e6b4b3adebf01a9d97056cbbfd8c44330df99 upstream. This patch fixes a >= v3.10 regression bug with mutex_trylock() usage within iscsit_increment_maxcmdsn(), that was originally added to allow for a special case where ->cmdsn_mutex was already held from the iscsit_execute_cmd() exception path for ib_isert. When !mutex_trylock() was occuring under contention during normal RX/TX process context codepaths, the bug was manifesting itself as the following protocol error: Received CmdSN: 0x000fcbb7 is greater than MaxCmdSN: 0x000fcbb6, protocol error. Received CmdSN: 0x000fcbb8 is greater than MaxCmdSN: 0x000fcbb6, protocol error. This patch simply avoids the direct ib_isert callback in lio_queue_status() for the special iscsi_execute_cmd() exception cases, that allows the problematic mutex_trylock() usage in iscsit_increment_maxcmdsn() to go away. Reported-by: Moussa Ba <moussaba@micron.com> Tested-by: Moussa Ba <moussaba@micron.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-11-13target/pscsi: fix return value checkWei Yongjun
commit 58932e96e438cd78f75e765d7b87ef39d3533d15 upstream. In case of error, the function scsi_host_lookup() returns NULL pointer not ERR_PTR(). The IS_ERR() test in the return value check should be replaced with NULL test. Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-10-13iscsi-target: Only perform wait_for_tasks when performing shutdownNicholas Bellinger
commit e255a28598e8e63070322fc89bd34189dd660a89 upstream. This patch changes transport_generic_free_cmd() to only wait_for_tasks when shutdown=true is passed to iscsit_free_cmd(). With the advent of >= v3.10 iscsi-target code using se_cmd->cmd_kref, the extra wait_for_tasks with shutdown=false is unnecessary, and may end up causing an extra context switch when releasing WRITEs. Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-09-26target: Fix >= v3.9+ regression in PR APTPL + ALUA metadata write-outGera Kazakov
commit f730f9158f6ee7b5c4d892af6b51a72194445ea4 upstream. This patch fixes a >= v3.9+ regression in __core_scsi3_write_aptpl_to_file() + core_alua_write_tpg_metadata() write-out, where a return value of -EIO was incorrectly being returned upon success. This bug was originally introduced in: commit 0e9b10a90f1c30f25dd6f130130240745ab14010 Author: Al Viro <viro@zeniv.linux.org.uk> Date: Sat Feb 23 15:22:43 2013 -0500 target: writev() on single-element vector is pointless However, given that the return of core_scsi3_update_and_write_aptpl() was not used to determine if a command should be returned with non GOOD status, this bug was not being triggered in PR logic until v3.11-rc1 by commit: commit 459f213ba162bd13e113d6f92a8fa6c780fd67ed Author: Andy Grover <agrover@redhat.com> Date: Thu May 16 10:41:02 2013 -0700 target: Allocate aptpl_buf inside update_and_write_aptpl() So, go ahead and only return -EIO if kernel_write() returned a negative value. Reported-by: Gera Kazakov <gkazakov@msn.com> Signed-off-by: Gera Kazakov <gkazakov@msn.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Andy Grover <agrover@redhat.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-09-07iscsi-target: Fix potential NULL pointer in solicited NOPOUT rejectNicholas Bellinger
commit 28aaa950320fc7b8df3f6d2d34fa7833391a9b72 upstream. This patch addresses a potential NULL pointer dereference regression in iscsit_setup_nop_out() code, specifically for two cases when a solicited NOPOUT triggers a ISCSI_REASON_PROTOCOL_ERROR reject to be generated. This is because iscsi_cmd is expected to be NULL for solicited NOPOUT case before iscsit_process_nop_out() locates the descriptor via TTT using iscsit_find_cmd_from_ttt(). This regression was originally introduced in: commit ba159914086f06532079fc15141f46ffe7e04a41 Author: Nicholas Bellinger <nab@linux-iscsi.org> Date: Wed Jul 3 03:48:24 2013 -0700 iscsi-target: Fix iscsit_add_reject* usage for iser Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-09-07iscsi-target: Fix iscsit_transport reference leak during NP thread resetNicholas Bellinger
commit c9a03c12464c851e691e8d5b6c9deba779c512e0 upstream. This patch fixes a bug in __iscsi_target_login_thread() where an explicit network portal thread reset ends up leaking the iscsit_transport module reference, along with the associated iscsi_conn allocation. This manifests itself with iser-target where a NP reset causes the extra iscsit_transport reference to be taken in iscsit_conn_set_transport() during the reset, which prevents the ib_isert module from being unloaded after the NP thread shutdown has finished. Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-09-07iscsi-target: Fix ImmediateData=Yes failure regression in >= v3.10Nicholas Bellinger
commit 9d86a2befceb06ee83c1a588915e6d6e0abef797 upstream. This patch addresses a regression bug within ImmediateData=Yes failure handling that ends up triggering an OOPs within >= v3.10 iscsi-target code. The problem occurs when iscsit_process_scsi_cmd() does the call to target_put_sess_cmd(), and once again in iscsit_get_immediate_data() that is triggered during two different cases: - When iscsit_sequence_cmd() returns CMDSN_LOWER_THAN_EXP, for which the descriptor state will already have been set to ISTATE_REMOVE by iscsit_sequence_cmd(), and - When iscsi_cmd->sense_reason is set, for which iscsit_execute_cmd() will have already called transport_send_check_condition_and_sense() to queue the exception response. It changes iscsit_process_scsi_cmd() to drop the early call, and makes iscsit_get_immediate_data() call target_put_sess_cmd() from a single location after dumping the immediate data for the failed command. The regression was initially introduced in commit: commit 561bf15892375597ee59d473a704a3e634c4f311 Author: Nicholas Bellinger <nab@linux-iscsi.org> Date: Wed Jul 3 03:58:58 2013 -0700 iscsi-target: Fix iscsit_sequence_cmd reject handling for iser Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-09-07target: Fix trailing ASCII space usage in INQUIRY vendor+modelNicholas Bellinger
commit ee60bddba5a5f23e39598195d944aa0eb2d455e5 upstream. This patch fixes spc_emulate_inquiry_std() to add trailing ASCII spaces for INQUIRY vendor + model fields following SPC-4 text: "ASCII data fields described as being left-aligned shall have any unused bytes at the end of the field (i.e., highest offset) and the unused bytes shall be filled with ASCII space characters (20h)." This addresses a problem with Falconstor NSS multipathing. Reported-by: Tomas Molota <tomas.molota@lightstorm.sk> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-04iscsi-target: Fix iscsit_sequence_cmd reject handling for iserNicholas Bellinger
commit 561bf15892375597ee59d473a704a3e634c4f311 upstream This patch moves ISCSI_OP_REJECT failures into iscsit_sequence_cmd() in order to avoid external iscsit_reject_cmd() reject usage for all PDU types. It also updates PDU specific handlers for traditional iscsi-target code to not reset the session after posting a ISCSI_OP_REJECT during setup. (v2: Fix CMDSN_LOWER_THAN_EXP for ISCSI_OP_SCSI to call target_put_sess_cmd() after iscsit_sequence_cmd() failure) Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org> Cc: Or Gerlitz <ogerlitz@mellanox.com> Cc: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-04iscsi-target: Fix iscsit_add_reject* usage for iserNicholas Bellinger
commit ba159914086f06532079fc15141f46ffe7e04a41 upstream This patch changes iscsit_add_reject() + iscsit_add_reject_from_cmd() usage to not sleep on iscsi_cmd->reject_comp to address a free-after-use usage bug in v3.10 with iser-target code. It saves ->reject_reason for use within iscsit_build_reject() so the correct value for both transport cases. It also drops the legacy fail_conn parameter usage throughput iscsi-target code and adds two iscsit_add_reject_cmd() and iscsit_reject_cmd helper functions, along with various small cleanups. (v2: Re-enable target_put_sess_cmd() to be called from iscsit_add_reject_from_cmd() for rejects invoked after target_get_sess_cmd() has been called) Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org> Cc: Or Gerlitz <ogerlitz@mellanox.com> Cc: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-04iscsi-target: Fix ISCSI_OP_SCSI_TMFUNC handling for iserNicholas Bellinger
commit 186a9647019587b3784694894c4d136fd00cfd7b upstream. This patch adds target_get_sess_cmd reference counting for iscsit_handle_task_mgt_cmd(), and adds a target_put_sess_cmd() for the failure case. It also fixes a bug where ISCSI_OP_SCSI_TMFUNC type commands where leaking iscsi_cmd->i_conn_node and eventually triggering an OOPs during struct isert_conn shutdown. Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-04iser-target: Fix session reset bug with RDMA_CM_EVENT_DISCONNECTEDNicholas Bellinger
commit b2cb96494d83b894a43ba8b9023eead8ff50684b upstream. This patch addresses a bug where RDMA_CM_EVENT_DISCONNECTED may occur before the connection shutdown has been completed by rx/tx threads, that causes isert_free_conn() to wait indefinately on ->conn_wait. This patch allows isert_disconnect_work code to invoke rdma_disconnect when isert_disconnect_work() process context is started by client session reset before isert_free_conn() code has been reached. It also adds isert_conn->conn_mutex protection for ->state within isert_disconnect_work(), isert_cq_comp_err() and isert_free_conn() code, along with isert_check_state() for wait_event usage. (v2: Add explicit iscsit_cause_connection_reinstatement call during isert_disconnect_work() to force conn reset) Cc: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-04iscsi-target: Fix tfc_tpg_nacl_auth_cit configfs length overflowJoern Engel
commit 0fbfc46fb0b2f543a8b539e94c6c293ebc0b05a6 upstream. This patch fixes a potential buffer overflow while processing iscsi_node_auth input for configfs attributes within NodeACL tfc_tpg_nacl_auth_cit context. Signed-off-by: Joern Engel <joern@logfs.org> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-06-20iscsi-target: Remove left over v3.10-rc debug printksNicholas Bellinger
Reported-by: Andy Grover <agrover@redhat.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-06-20target/iscsi: Fix op=disable + error handling cases in np_store_iserAndy Grover
Writing 0 when iser was not previously enabled, so succeed but do nothing so that user-space code doesn't need a try: catch block when ib_isert logic is not available. Also, return actual error from add_network_portal using PTR_ERR during op=enable failure. Signed-off-by: Andy Grover <agrover@redhat.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-06-14target/iscsi: don't corrupt bh_count in iscsit_stop_time2retain_timer()Jörn Engel
Here is a fun one. Bug seems to have been introduced by commit 140854cb, almost two years ago. I have no idea why we only started seeing it now, but we did. Rough callgraph: core_tpg_set_initiator_node_queue_depth() `-> spin_lock_irqsave(&tpg->session_lock, flags); `-> lio_tpg_shutdown_session() `-> iscsit_stop_time2retain_timer() `-> spin_unlock_bh(&se_tpg->session_lock); `-> spin_lock_bh(&se_tpg->session_lock); `-> spin_unlock_irqrestore(&tpg->session_lock, flags); core_tpg_set_initiator_node_queue_depth() used to call spin_lock_bh(), but 140854cb changed that to spin_lock_irqsave(). However, lio_tpg_shutdown_session() still claims to be called with spin_lock_bh() held, as does iscsit_stop_time2retain_timer(): * Called with spin_lock_bh(&struct se_portal_group->session_lock) held Stale documentation is mostly annoying, but in this case the dropping the lock with the _bh variant is plain wrong. It is also wrong to drop locks two functions below the lock-holder, but I will ignore that bit for now. After some more locking and unlocking we eventually hit this backtrace: ------------[ cut here ]------------ WARNING: at kernel/softirq.c:159 local_bh_enable_ip+0xe8/0x100() Pid: 24645, comm: lio_helper.py Tainted: G O 3.6.11+ Call Trace: [<ffffffff8103e5ff>] warn_slowpath_common+0x7f/0xc0 [<ffffffffa040ae37>] ? iscsit_inc_conn_usage_count+0x37/0x50 [iscsi_target_mod] [<ffffffff8103e65a>] warn_slowpath_null+0x1a/0x20 [<ffffffff810472f8>] local_bh_enable_ip+0xe8/0x100 [<ffffffff815b8365>] _raw_spin_unlock_bh+0x15/0x20 [<ffffffffa040ae37>] iscsit_inc_conn_usage_count+0x37/0x50 [iscsi_target_mod] [<ffffffffa041149a>] iscsit_stop_session+0xfa/0x1c0 [iscsi_target_mod] [<ffffffffa0417fab>] lio_tpg_shutdown_session+0x7b/0x90 [iscsi_target_mod] [<ffffffffa033ede4>] core_tpg_set_initiator_node_queue_depth+0xe4/0x290 [target_core_mod] [<ffffffffa0409032>] iscsit_tpg_set_initiator_node_queue_depth+0x12/0x20 [iscsi_target_mod] [<ffffffffa0415c29>] lio_target_nacl_store_cmdsn_depth+0xa9/0x180 [iscsi_target_mod] [<ffffffffa0331b49>] target_fabric_nacl_base_attr_store+0x39/0x40 [target_core_mod] [<ffffffff811b857d>] configfs_write_file+0xbd/0x120 [<ffffffff81148f36>] vfs_write+0xc6/0x180 [<ffffffff81149251>] sys_write+0x51/0x90 [<ffffffff815c0969>] system_call_fastpath+0x16/0x1b ---[ end trace 3747632b9b164652 ]--- As a pure band-aid, this patch drops the _bh. Signed-off-by: Joern Engel <joern@logfs.org> Cc: stable <stable@vger.kernel.org> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-05-31iscsi-target: Fix iscsit_free_cmd() se_cmd->cmd_kref shutdown handlingNicholas Bellinger
With the introduction of target_get_sess_cmd() referencing counting for ISCSI_OP_SCSI_CMD processing with iser-target, iscsit_free_cmd() usage in traditional iscsi-target driver code now needs to be aware of the active I/O shutdown case when a remaining se_cmd->cmd_kref reference may exist after transport_generic_free_cmd() completes, requiring a final target_put_sess_cmd() to release iscsi_cmd descriptor memory. This patch changes iscsit_free_cmd() to invoke __iscsit_free_cmd() before transport_generic_free_cmd() -> target_put_sess_cmd(), and also avoids aquiring the per-connection queue locks for typical fast-path calls during normal ISTATE_REMOVE operation. Also update iscsit_free_cmd() usage throughout iscsi-target to use the new 'bool shutdown' parameter. This patch fixes a regression bug introduced during v3.10-rc1 in commit 3e1c81a95, that was causing the following WARNING to appear: [ 257.235153] ------------[ cut here]------------ [ 257.240314] WARNING: at kernel/softirq.c:160 local_bh_enable_ip+0x3c/0x86() [ 257.248089] Modules linked in: vhost_scsi ib_srpt ib_cm ib_sa ib_mad ib_core tcm_qla2xxx tcm_loop tcm_fc libfc iscsi_target_mod target_core_pscsi target_core_file target_core_iblock target_core_mod configfs ipv6 iscsi_tcp libiscsi_tcp libiscsi scsi_transport_iscsi loop acpi_cpufreq freq_table mperf kvm_intel kvm crc32c_intel button ehci_pci pcspkr joydev i2c_i801 microcode ext3 jbd raid10 raid456 async_pq async_xor xor async_memcpy async_raid6_recov raid6_pq async_tx raid1 raid0 linear igb hwmon i2c_algo_bit i2c_core ptp ata_piix libata qla2xxx uhci_hcd ehci_hcd mlx4_core scsi_transport_fc scsi_tgt pps_core [ 257.308748] CPU: 1 PID: 3295 Comm: iscsi_ttx Not tainted 3.10.0-rc2+ #103 [ 257.316329] Hardware name: Intel Corporation S5520HC/S5520HC, BIOS S5500.86B.01.00.0057.031020111721 03/10/2011 [ 257.327597] ffffffff814c24b7 ffff880458331b58 ffffffff8138eef2 ffff880458331b98 [ 257.335892] ffffffff8102c052 ffff880400000008 0000000000000000 ffff88085bdf0000 [ 257.344191] ffff88085bdf00d8 ffff88085bdf00e0 ffff88085bdf00f8 ffff880458331ba8 [ 257.352488] Call Trace: [ 257.355223] [<ffffffff8138eef2>] dump_stack+0x19/0x1f [ 257.360963] [<ffffffff8102c052>] warn_slowpath_common+0x62/0x7b [ 257.367669] [<ffffffff8102c080>] warn_slowpath_null+0x15/0x17 [ 257.374181] [<ffffffff81032345>] local_bh_enable_ip+0x3c/0x86 [ 257.380697] [<ffffffff813917fd>] _raw_spin_unlock_bh+0x10/0x12 [ 257.387311] [<ffffffffa029069c>] iscsit_free_r2ts_from_list+0x5e/0x67 [iscsi_target_mod] [ 257.396438] [<ffffffffa02906c5>] iscsit_release_cmd+0x20/0x223 [iscsi_target_mod] [ 257.404893] [<ffffffffa02977a4>] lio_release_cmd+0x3a/0x3e [iscsi_target_mod] [ 257.412964] [<ffffffffa01d59a1>] target_release_cmd_kref+0x7a/0x7c [target_core_mod] [ 257.421712] [<ffffffffa01d69bc>] target_put_sess_cmd+0x5f/0x7f [target_core_mod] [ 257.430071] [<ffffffffa01d6d6d>] transport_release_cmd+0x59/0x6f [target_core_mod] [ 257.438625] [<ffffffffa01d6eb4>] transport_put_cmd+0x131/0x140 [target_core_mod] [ 257.446985] [<ffffffffa01d6192>] ? transport_wait_for_tasks+0xfa/0x1d5 [target_core_mod] [ 257.456121] [<ffffffffa01d6f11>] transport_generic_free_cmd+0x4e/0x52 [target_core_mod] [ 257.465159] [<ffffffff81050537>] ? __migrate_task+0x110/0x110 [ 257.471674] [<ffffffffa02904ba>] iscsit_free_cmd+0x46/0x55 [iscsi_target_mod] [ 257.479741] [<ffffffffa0291edb>] iscsit_immediate_queue+0x301/0x353 [iscsi_target_mod] [ 257.488683] [<ffffffffa0292f7e>] iscsi_target_tx_thread+0x1c6/0x2a8 [iscsi_target_mod] [ 257.497623] [<ffffffff81047486>] ? wake_up_bit+0x25/0x25 [ 257.503652] [<ffffffffa0292db8>] ? iscsit_ack_from_expstatsn+0xd5/0xd5 [iscsi_target_mod] [ 257.512882] [<ffffffff81046f89>] kthread+0xb0/0xb8 [ 257.518329] [<ffffffff81046ed9>] ? kthread_freezable_should_stop+0x60/0x60 [ 257.526105] [<ffffffff81396fec>] ret_from_fork+0x7c/0xb0 [ 257.532133] [<ffffffff81046ed9>] ? kthread_freezable_should_stop+0x60/0x60 [ 257.539906] ---[ end trace 5520397d0f2e0800 ]--- Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-05-31target: Propigate up ->cmd_kref put return via transport_generic_free_cmdNicholas Bellinger
Go ahead and propigate up the ->cmd_kref put return value from target_put_sess_cmd() -> transport_release_cmd() -> transport_put_cmd() -> transport_generic_free_cmd(). This is useful for certain fabrics when determining the active I/O shutdown case with SCF_ACK_KREF where a final target_put_sess_cmd() is still required by the caller. Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-05-30iscsi-target: fix heap buffer overflow on errorKees Cook
If a key was larger than 64 bytes, as checked by iscsi_check_key(), the error response packet, generated by iscsi_add_notunderstood_response(), would still attempt to copy the entire key into the packet, overflowing the structure on the heap. Remote preauthentication kernel memory corruption was possible if a target was configured and listening on the network. CVE-2013-2850 Signed-off-by: Kees Cook <keescook@chromium.org> Cc: stable@vger.kernel.org Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-05-30target/file: Fix off-by-one READ_CAPACITY bug for !S_ISBLK exportNicholas Bellinger
This patch fixes a bug where FILEIO was incorrectly reporting the number of logical blocks (+ 1) when using non struct block_device export mode. It changes fd_get_blocks() to follow all other backend ->get_blocks() cases, and reduces the calculated dev_size by one dev->dev_attrib.block_size number of bytes, and also fixes initial fd_block_size assignment at fd_configure_device() time introduced in commit 0fd97ccf4. Reported-by: Wenchao Xia <xiawenc@linux.vnet.ibm.com> Reported-by: Badari Pulavarty <pbadari@us.ibm.com> Tested-by: Badari Pulavarty <pbadari@us.ibm.com> Cc: stable@vger.kernel.org Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-05-29target: Re-instate sess_wait_list for target_wait_for_sess_cmdsNicholas Bellinger
Switch back to pre commit 1c7b13fe652 list splicing logic for active I/O shutdown with tcm_qla2xxx + ib_srpt fabrics. The original commit was done under the incorrect assumption that it's safe to walk se_sess->sess_cmd_list unprotected in target_wait_for_sess_cmds() after sess->sess_tearing_down = 1 has been set by target_sess_cmd_list_set_waiting() during session shutdown. So instead of adding sess->sess_cmd_lock protection around sess->sess_cmd_list during target_wait_for_sess_cmds(), switch back to sess->sess_wait_list to allow wait_for_completion() + TFO->release_cmd() to occur without having to walk ->sess_cmd_list after the list_splice. Also add a check to exit if target_sess_cmd_list_set_waiting() has already been called, and add a WARN_ON to check for any fabric bug where new se_cmds are added to sess->sess_cmd_list after sess->sess_tearing_down = 1 has already been set. Cc: Joern Engel <joern@logfs.org> Cc: Roland Dreier <roland@kernel.org> Cc: stable@vger.kernel.org Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-05-20target: Remove unused wait_for_tasks bit in target_wait_for_sess_cmdsJoern Engel
Drop unused transport_wait_for_tasks() check in target_wait_for_sess_cmds shutdown code, and convert tcm_qla2xxx + ib_srpt fabric drivers. Cc: Joern Engel <joern@logfs.org> Cc: Roland Dreier <roland@kernel.org> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-05-16Merge branch 'queue' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending Pull target fixes from Nicholas Bellinger: "A handful of fixes + minor changes this time around, along with one important >= v3.9 regression fix for IBLOCK backends. The highlights include: - Use FD_MAX_SECTORS in FILEIO for block_device as well as files (agrover) - Fix processing of out-of-order CmdSNs with iSBD driver (shlomo) - Close long-standing target_put_sess_cmd() vs. core_tmr_abort_task() race with the addition of kref_put_spinlock_irqsave() (joern + greg-kh) - Fix IBLOCK WCE=1 + DPOFUA=1 backend WRITE regression in >= v3.9 (nab + bootc) Note these four patches are CC'ed to stable. Also, there is still some work left to be done on the active I/O shutdown path in target_wait_for_sess_cmds() used by tcm_qla2xxx + ib_isert fabrics that is still being discussed on the list, and will hopefully be resolved soon." * 'queue' of git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending: target: close target_put_sess_cmd() vs. core_tmr_abort_task() race target: removed unused transport_state flag target/iblock: Fix WCE=1 + DPOFUA=1 backend WRITE regression MAINTAINERS: Update target git tree URL iscsi-target: Fix typos in RDMAEXTENSIONS macro usage target/rd: Add ramdisk bit for NULLIO operation iscsi-target: Fix processing of OOO commands iscsi-target: Make buf param of iscsit_do_crypto_hash_buf() const void * iscsi-target: Fix NULL pointer dereference in iscsit_send_reject target: Have dev/enable show if TCM device is configured target: Use FD_MAX_SECTORS/FD_BLOCKSIZE for blockdevs using fileio target: Remove unused struct members in se_dev_entry
2013-05-15target: close target_put_sess_cmd() vs. core_tmr_abort_task() raceJoern Engel
It is possible for one thread to to take se_sess->sess_cmd_lock in core_tmr_abort_task() before taking a reference count on se_cmd->cmd_kref, while another thread in target_put_sess_cmd() drops se_cmd->cmd_kref before taking se_sess->sess_cmd_lock. This introduces kref_put_spinlock_irqsave() and uses it in target_put_sess_cmd() to close the race window. Signed-off-by: Joern Engel <joern@logfs.org> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: <stable@vger.kernel.org> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-05-15target/iblock: Fix WCE=1 + DPOFUA=1 backend WRITE regressionNicholas Bellinger
This patch fixes a regression bug introduced in v3.9-rc1 where if the underlying struct block_device for a IBLOCK backend is configured with WCE=1 + DPOFUA=1 settings, the rw = WRITE assignment no longer occurs in iblock_execute_rw(), and rw = 0 is passed to iblock_submit_bios() in effect causing a READ bio operation to occur. The offending commit is: commit d0c8b259f8970d39354c1966853363345d401330 Author: Nicholas Bellinger <nab@linux-iscsi.org> Date: Tue Jan 29 22:10:06 2013 -0800 target/iblock: Use backend REQ_FLUSH hint for WriteCacheEnabled status Note the WCE=1 + DPOFUA=0, WCE=0 + DPOFUA=1, and WCE=0 + DPOFUA=0 cases are not affected by this regression bug. Reported-by: Chris Boot <bootc@bootc.net> Tested-by: Chris Boot <bootc@bootc.net> Reported-by: Hannes Reinecke <hare@suse.de> Cc: <stable@vger.kernel.org> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-05-11iscsi-target: Fix typos in RDMAEXTENSIONS macro usageNicholas Bellinger
This patch fixes a handful of typos in 'RDMAEXTENTIONS' -> 'RDMAEXTENSIONS' macro usage. Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-05-11target/rd: Add ramdisk bit for NULLIO operationNicholas Bellinger
This patch adds a rd_nullio parameter that allows RAMDISK_MCP backends to function in NULLIO mode, where all se_cmd I/O is immediately completed in rd_execute_rw() without actually performing the SGL memory copy. This is useful for performance testing when the ramdisk SGL memory copy begins to eat lots of cycles during heavy small block workloads, so allow this bit to be enabled when necessary on a per rd_dev basis. Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-05-07iscsi-target: Fix processing of OOO commandsShlomo Pongratz
Fix two issues in OOO commands processing done at iscsit_attach_ooo_cmdsn. Handle command serial numbers wrap around by using iscsi_sna_lt and not regular comparisson. The routine iterates until it finds an entry whose serial number is greater than the serial number of the new one, thus the new entry should be inserted before that entry and not after. Signed-off-by: Shlomo Pongratz <shlomop@mellanox.com> Cc: <stable@vger.kernel.org> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-05-03iscsi-target: Make buf param of iscsit_do_crypto_hash_buf() const void *Geert Uytterhoeven
Make the "buf" input param of iscsit_do_crypto_hash_buf() "const void *". This allows to remove lots of casts in its callers. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-05-03iscsi-target: Fix NULL pointer dereference in iscsit_send_rejectNicholas Bellinger
Fix up a NULL pointer dereference regression in iscsit_send_reject() introduced by from commit 2ec5a8c11. Reported-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-05-03target: Have dev/enable show if TCM device is configuredAndy Grover
User tools need to know if the device is properly configured, since if not, some other attributes are invalid. Signed-off-by: Andy Grover <agrover@redhat.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-05-03target: Use FD_MAX_SECTORS/FD_BLOCKSIZE for blockdevs using fileioAndy Grover
We can still see the error reported in https://patchwork.kernel.org/patch/2338981/ when using fileio backed by a block device. I'm assuming this will get us past that error (from sbc_parse_cdb), and also assuming it's OK to have our max_sectors be larger than the block's queue max hw sectors? Reported-by: Eric Harney <eharney@redhat.com> Signed-off-by: Andy Grover <agrover@redhat.com> Cc: <stable@vger.kernel.org> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-05-03target: Remove unused struct members in se_dev_entryAndy Grover
Some were incremented, but never used anywhere from what I could tell. Signed-off-by: Andy Grover <agrover@redhat.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-05-01Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull VFS updates from Al Viro, Misc cleanups all over the place, mainly wrt /proc interfaces (switch create_proc_entry to proc_create(), get rid of the deprecated create_proc_read_entry() in favor of using proc_create_data() and seq_file etc). 7kloc removed. * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (204 commits) don't bother with deferred freeing of fdtables proc: Move non-public stuff from linux/proc_fs.h to fs/proc/internal.h proc: Make the PROC_I() and PDE() macros internal to procfs proc: Supply a function to remove a proc entry by PDE take cgroup_open() and cpuset_open() to fs/proc/base.c ppc: Clean up scanlog ppc: Clean up rtas_flash driver somewhat hostap: proc: Use remove_proc_subtree() drm: proc: Use remove_proc_subtree() drm: proc: Use minor->index to label things, not PDE->name drm: Constify drm_proc_list[] zoran: Don't print proc_dir_entry data in debug reiserfs: Don't access the proc_dir_entry in r_open(), r_start() r_show() proc: Supply an accessor for getting the data from a PDE's parent airo: Use remove_proc_subtree() rtl8192u: Don't need to save device proc dir PDE rtl8187se: Use a dir under /proc/net/r8180/ proc: Add proc_mkdir_data() proc: Move some bits from linux/proc_fs.h to linux/{of.h,signal.h,tty.h} proc: Move PDE_NET() to fs/proc/proc_net.c ...
2013-04-25tcm_fc: Check for aborted sequenceMark Rustad
Add a check for an aborted sequence, which has a NULL sequence pointer, to avoid target crashes. The most relevant messages from the crash (entered from video capture) include: BUG: unable to handle kernel paging request at ffffffffffffffdf IP: [<ffffffffa02d514c>] fc_seq_send+0x3c/0x150 [libfc] ... Call Trace: [<ffffffffa0443de6>] ft_queue_data_in+0x266/0x560 [tcm_fc] Signed-off-by: Mark Rustad <mark.d.rustad@intel.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-04-25iscsi-target: Add iser network portal attributeNicholas Bellinger
This patch adds a new network portal attribute for iser, that lives under existing iscsi-target configfs layout at: /sys/kernel/config/target/iscsi/$TARGETNAME/$TPGT/np/$PORTAL/iser When lio_target_np_store_iser() is enabled, iscsit_tpg_add_network_portal() will attempt to start an rdma_cma network portal for iser-target, only if the external ib_isert module transport has been loaded. When disabled, iscsit_tpg_del_network_portal() will cease iser login service on the network portal, and release any external ib_isert module reference. v4 changes: - Add request_module for ib_isert to lio_target_np_store_iser() Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-04-25iscsi-target: Refactor TX queue logic + export response PDU creationNicholas Bellinger
This patch refactors TX immediate + response queue handling to use the new iscsit_transport API callers, and exports the necessary traditional iscsi PDU response creation functions for iser-target to utilize. This includes: - Add iscsit_build_datain_pdu() for DATAIN PDU init + convert iscsit_build_datain_pdu() - Add iscsit_build_logout_rsp() for LOGOUT_RSP PDU init + convert iscsit_send_logout() - Add iscsit_build_nopin_rsp() for NOPIN_RSP PDU init + convert iscsit_send_nopin() - Add iscsit_build_rsp_pdu() for SCSI_RSP PDU init + convert iscsit_send_response() - Add iscsit_build_task_mgt_rsp for TM_RSP PDU init + convert iscsit_send_task_mgt_rsp() - Refactor immediate queue state switch into iscsit_immediate_queue() - Convert handle_immediate_queue() to use iscsit_transport caller - Refactor response queue state switch into iscsit_response_queue() - Convert handle_response_queue to use iscsit_transport caller - Export iscsit_logout_post_handler(), iscsit_increment_maxcmdsn() and iscsit_tmr_post_handler() for external transport module usage v5 changes: - Fix solicited NopIN handling with RDMAExtensions=No (nab) v3 changes: - Add iscsit_build_reject for REJECT PDU init + convert iscsit_send_reject() v2 changes: - Add iscsit_queue_rsp() for iscsit_transport->iscsit_queue_data_in() and iscsit_transport->iscsit_queue_status() - Update lio_queue_data_in() to use ->iscsit_queue_data_in() - Update lio_queue_status() to use ->iscsit_queue_status() - Use mutex_trylock() in iscsit_increment_maxcmdsn() Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-04-25iscsi-target: Refactor RX PDU logic + export request PDU handlingNicholas Bellinger
This patch refactors existing traditional iscsi RX side PDU handling to use iscsit_transport, and exports the necessary logic for external transport modules. This includes: - Refactor iscsit_handle_scsi_cmd() into PDU setup / processing - Add updated iscsit_handle_scsi_cmd() for tradtional iscsi code - Add iscsit_set_unsoliticed_dataout() wrapper - Refactor iscsit_handle_data_out() into PDU check / processing - Add updated iscsit_handle_data_out() for tradtional iscsi code - Add iscsit_handle_nop_out() + iscsit_handle_task_mgt_cmd() to accept pre-allocated struct iscsi_cmd - Add iscsit_build_r2ts_for_cmd() caller for iscsi_target_transport to handle ISTATE_SEND_R2T for TX immediate queue - Refactor main traditional iscsi iscsi_target_rx_thread() PDU switch into iscsi_target_rx_opcode() using iscsit_allocate_cmd() - Turn iscsi_target_rx_thread() process context into NOP for ib_isert side work-queue. v5 changes: - Make iscsit_handle_scsi_cmd() static (Fengguang) - Fix iscsit_handle_scsi_cmd() exception se_cmd leak (nab) v3 changes: - Add extra target_put_sess_cmd call in iscsit_add_reject_from_cmd after completion v2 changes: - Disable iscsit_ack_from_expstatsn() usage for RDMAExtentions=Yes - Disable iscsit_allocate_datain_req() usage for RDMAExtentions=Yes - Add target_get_sess_cmd() reference counting to iscsit_setup_scsi_cmd() - Add TFO->lio_check_stop_free() fabric API caller - Add export of iscsit_stop_dataout_timer() symbol - Add iscsit_build_r2ts_for_cmd() for iscsit_transport->iscsit_get_dataout() - Convert existing usage of iscsit_build_r2ts_for_cmd() to ->iscsit_get_dataout() - Drop RDMAExtentions=Yes specific check in iscsit_build_r2ts_for_cmd() - Fix RDMAExtentions -> RDMAExtensions typo (andy) - Pass correct dump_payload value into iscsit_get_immediate_data() for iscsit_handle_scsi_cmd() Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-04-25iscsi-target: Add per transport iscsi_cmd alloc/freeNicholas Bellinger
This patch converts struct iscsi_cmd memory allocation + free to use ->iscsit_alloc_cmd() iscsit_transport API caller, and export iscsit_allocate_cmd() symbols Also add iscsi_cmd->release_cmd() to be used seperately from iscsit_transport for connection/session shutdown. v2 changes: - Remove unnecessary checks in iscsit_alloc_cmd (asias) - Drop iscsit_transport->iscsit_free_cmd() usage - Drop iscsit_transport->iscsit_unmap_cmd() usage - Add iscsi_cmd->release_cmd() - Convert lio_release_cmd() to use iscsi_cmd->release_cmd() Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-04-25iscsi-target: Add iser-target parameter keys + setup during loginNicholas Bellinger
This patch adds RDMAExtensions, InitiatorRecvDataSegmentLength and TargetRecvDataSegmentLength parameters keys necessary for iser-target login to occur. This includes setting the necessary parameters during login path code within iscsi_login_zero_tsih_s2(), and currently PAGE_SIZE aligning the target's advertised MRDSL for immediate data and unsolicited data-out incoming payloads. v3 changes: - Add iscsi_post_login_start_timers FIXME for ISER v2 changes: - Fix RDMAExtentions -> RDMAExtensions typo (andy) - Drop unnecessary '== true' conditional checks for type bool Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-04-25iscsi-target: Initial traditional TCP conversion to iscsit_transportNicholas Bellinger
This patch performs the initial conversion of existing traditional iscsi to use iscsit_transport API callers. This includes: - iscsi-np cleanups for iscsit_transport_type - Add iscsi-np transport calls w/ ->iscsit_setup_up() and ->iscsit_free_np() - Convert login thread process context to use ->iscsit_accept_np() for connections with pre-allocated struct iscsi_conn - Convert existing socket accept code to iscsit_accept_np() - Convert login RX/TX callers to use ->iscsit_get_login_rx() and ->iscsit_put_login_tx() to exchange request/response PDUs - Convert existing socket login RX/TX calls into iscsit_get_login_rx() and iscsit_put_login_tx() - Change iscsit_close_connection() to invoke ->iscsit_free_conn() + iscsit_put_transport() calls. - Add iscsit_register_transport() + iscsit_unregister_transport() calls to module init/exit v4 changes: - Add missing iscsit_put_transport() call in iscsi_target_setup_login_socket() failure case v2 changes: - Update module init/exit to use register_transport() + unregister_transport() Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-04-25iscsi-target: Add iscsit_transport API templateNicholas Bellinger
Add basic struct iscsit_transport API template to allow iscsi-target for running with external transport modules using existing iscsi_target_core.h code. For all external modules, this calls try_module_get() and module_put() to obtain + release an external iscsit_transport module reference count. Also include the iscsi-target symbols necessary in iscsi_transport.h to allow external transport modules to function. v3 changes: - Add iscsit_build_reject export for ISTATE_SEND_REJECT usage v2 changes: - Drop unnecessary export of iscsit_get_transport + iscsit_put_transport (roland) - Add ->iscsit_queue_data_in() to remove extra context switch on RDMA_WRITE - Add ->iscsit_queue_status() to remove extra context switch on IB_SEND status - Add ->iscsit_get_dataout() to remove extra context switch on RDMA_READ - Drop ->iscsit_free_cmd() - Drop ->iscsit_unmap_cmd() - Rename iscsit_create_transport() -> iscsit_register_transport() (andy) - Rename iscsit_destroy_transport() -> iscsit_unregister_transport() (andy) Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-04-25target: Add export of target_get_sess_cmd symbolNicholas Bellinger
Export target_get_sess_cmd() symbol so that it can be used by iscsi-target. Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-04-25target: Change default sense key of NOT_READYJörn Engel
As the comment sais, this allows Solaris initiators to survive intermittent errors. The comment from someone reading the Solaris sources seem to imply that multipathing would be broken without this patch as well. Signed-off-by: Joern Engel <joern@logfs.org> Cc: Brian Bunker <brian@purestorage.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-04-25target/file: Set is_nonrot attributeAsias He
Set is_nonrot attribute according to the block queue if the backend device is a block device. Signed-off-by: Asias He <asias@redhat.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-05-30 22:25:12 +0000