aboutsummaryrefslogtreecommitdiff
path: root/drivers/usb/chipidea
AgeCommit message (Collapse)Author
2013-06-11usb: chipidea: fix id change handlingAlexander Shishkin
Re-enable chipidea irq even if there's no role changing to do. This is a problem since b183c19f ("USB: chipidea: re-order irq handling to avoid unhandled irqs"); when it manifests, chipidea irq gets disabled for good. Cc: stable@vger.kernel.org # v3.7 Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-06-11usb: chipidea: fix no transceiver caseAlexander Shishkin
Since usb phy code does return ERR_PTR() values, make sure that we don't end up dereferencing them. This is a problem, for example, on platforms that don't register a phy for chipidea since b7fa5c2a ("usb: phy: return -ENXIO when PHY layer isn't enabled"). Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-05-23Merge tag 'usb-3.10-rc2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB fixes from Greg Kroah-Hartman: "Here are a number of tiny USB bugfixes / new device ids for 3.10-rc2 The majority of these are USB gadget fixes, but they are all small. Other than that, some USB host controller fixes, and USB serial driver fixes for problems reported with them. Also hopefully a fixed up USB_OTG Kconfig dependancy, that one seems to be almost impossible to get right for all of the different platforms these days." * tag 'usb-3.10-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (56 commits) USB: cxacru: potential underflow in cxacru_cm_get_array() USB: ftdi_sio: Add support for Newport CONEX motor drivers USB: option: add device IDs for Dell 5804 (Novatel E371) WWAN card usb: ohci: fix goto wrong tag in err case usb: isp1760-if: fix memleak when platform_get_resource fail usb: ehci-s5p: fix memleak when fallback to pdata USB: serial: clean up chars_in_buffer USB: ti_usb_3410_5052: fix chars_in_buffer overhead USB: io_ti: fix chars_in_buffer overhead USB: ftdi_sio: fix chars_in_buffer overhead USB: ftdi_sio: clean up get_modem_status USB: serial: add generic wait_until_sent implementation USB: serial: add wait_until_sent operation USB: set device dma_mask without reference to global data USB: Blacklisted Cinterion's PLxx WWAN Interface usb: option: Add Telewell TW-LTE 4G USB: EHCI: remove bogus #error USB: reset resume quirk needed by a hub USB: usb-stor: realtek_cr: Fix compile error usb, chipidea: fix link error when USB_EHCI_HCD is a module ...
2013-05-18drivers/usb/chipidea: don't check resource with devm_ioremap_resourceWolfram Sang
devm_ioremap_resource does sanity checks on the given resource. No need to duplicate this in the driver. Signed-off-by: Wolfram Sang <wsa@the-dreams.de> Acked-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
2013-05-16USB: set device dma_mask without reference to global dataStephen Warren
Many USB host drivers contain code such as: if (!pdev->dev.dma_mask) pdev->dev.dma_mask = &tegra_ehci_dma_mask; ... where tegra_ehci_dma_mask is a global. I suspect this code originated in commit 4a53f4e "USB: ehci-tegra: add probing through device tree" and was simply copied everywhere else. This works fine when the code is built-in, but can cause a crash when the code is in a module. The first module load sets up the dma_mask pointer, but if the module is removed and re-inserted, the value is now non-NULL, and hence is not updated to point at the new location, and hence points at a stale location within the previous module load address, which in turn causes a crash if the pointer is de-referenced. The simplest way of solving this seems to be to copy the code from ehci-platform.c, which uses the coherent_dma_mask as the target for the dma_mask pointer. Suggested-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-by: Tony Prisk <linux@prisktech.co.nz> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-05-16usb, chipidea: fix link error when USB_EHCI_HCD is a moduleDavid Rientjes
Fixes link error when USB_EHCI_HCD=m and USB_CHIPIDEA_HOST=y: drivers/built-in.o: In function `ci_hdrc_host_init': drivers/usb/chipidea/host.c:104: undefined reference to `ehci_init_driver' as a result of commit 09f6ffde2ece ("USB: EHCI: fix build error by making ChipIdea host a normal EHCI driver"). Cc: stable@vger.kernel.org [v3.7+] Signed-off-by: David Rientjes <rientjes@google.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-04-05Merge tag 'usb-for-v3.10' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-next Felipe writes: usb: patches for v3.10 merge window Here is the big Gadget & PHY pull request. Many of us have been really busy lately getting multiple drivers to a better position. Since this pull request is so large, I will divide it in sections so it's easier to grasp what's included. - cleanups: . UDC drivers no longer touch gadget->dev, that's now udc-core responsibility . Many more UDC drivers converted to usb_gadget_map/unmap_request() . UDC drivers no longer initialize DMA-related fields from gadget's device structure . UDC drivers don't touch gadget.dev.driver directly . UDC drivers don't assign gadget.dev.release directly . Removal of some unused DMA_ADDR_INVALID . Introduction of CONFIG_USB_PHY . All phy drivers have been moved to drivers/usb/phy and renamed to a common naming scheme . Fix PHY layer so it never returns a NULL pointer, also fix all callers to avoid using IS_ERR_OR_NULL() . Sparse fixes all over the place . drivers/usb/otg/ has been deleted . Marvel drivers (mv_udc, ehci-mv, mv_otg and mv_u3d) improved clock usage - new features: . UDC core now provides a generic way for tracking and reporting UDC's state (not attached, resuming, suspended, addressed, default, etc) . twl4030-usb learned that it shouldn't be enabled during init . Full DT support for DWC3 has been implemented . ab8500-usb learned about pinctrl framework . nop PHY learned about DeviceTree and regulators . DWC3 learned about suspend/resume . DWC3 can now be compiled in host-only and gadget-only (as well as DRD) configurations . UVC now enables streaming endpoint based on negotiated speed . isp1301 now implements the PHY API properly . configfs-based interface for gadget drivers which will lead to the removal of all code which just combines functions together to build functional gadget drivers. . f_serial and f_obex were converted to new configfs interface while maintaining old interface around. - non-critical fixes: . UVC gadget driver got fixes for Endpoint usage and stream calculation . ab8500-usb fixed unbalanced clock and regulator API usage . twl4030-usb got a fix for when OMAP3 is booted with cable connected . fusb300_udc got a fix for DMA usage . UVC got fixes for two assertions of the USB Video Class Compliance specification revision 1.1 . build warning issues caused by recent addition of __must_check to regulator API These are all changes which deserve a mention, all other changes are related to these one or minor spelling fixes and other similar tasks. Signed-of-by: Felipe Balbi <balbi@ti.com>
2013-04-05usb: chipidea: udc: fix memory leak in _ep_nukeMichael Grzeschik
In hardware_enqueue code adds one extra td with dma_pool_alloc if mReq->req.zero is true. When _ep_nuke will be called for that endpoint, dma_pool_free will not be called to free that memory again. That patch fixes this. Cc: stable <stable@vger.kernel.org> # v3.5 Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de> Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-04-05usb: chipidea: udc: fix memory access of shared memory on armv5 machinesMichael Grzeschik
The udc uses an shared dma memory space between hard and software. This memory layout is described in ci13xxx_qh and ci13xxx_td which are marked with the attribute ((packed)). The compiler currently does not know about the alignment of the memory layout, and will create strb and ldrb operations. The Datasheet of the synopsys core describes, that some operations on the mapped memory need to be atomic double word operations. I.e. the next pointer addressing in the qhead, as otherwise the hardware will read wrong data and totally stuck. This is also possible while working with the current active td queue, and preparing the td->ptr.next in software while the hardware is still working with the current active td which is supposed to be changed: writeb(0xde, &td->ptr.next + 0x0); /* strb */ writeb(0xad, &td->ptr.next + 0x1); /* strb */ <----- hardware reads value of td->ptr.next and get stuck! writeb(0xbe, &td->ptr.next + 0x2); /* strb */ writeb(0xef, &td->ptr.next + 0x3); /* strb */ This appeares on armv5 machines where the hardware does not support unaligned 32bit operations. This patch adds the attribute ((aligned(4))) to the structures to tell the compiler to use 32bit operations. It also adds an wmb() for the prepared TD data before it gets enqueued into the qhead. Cc: stable <stable@vger.kernel.org> # v3.5 Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de> Reviewed-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-03-30usb: chipidea: udc: add the define TD_PAGE_COUNT and fix all usersMichael Grzeschik
A static count of transfer descriptors was used everywhere in the driver with the fixed number 5. This patch adds a define, named TD_PAGE_COUNT, and replaces all users of this value. This way its possible to have only one parameter to change and limit the amount of buffer pointers per TD. Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de> Reviewed-by: Peter Chen <peter.chen@freescale.com> Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-03-30usb: chipidea: udc: move _ep_queue into an unlocked functionMichael Grzeschik
There is no need to call ep_queue unlocked inside the own driver. We move its functionionality into an unlocked version. This patch removes potential unlocked timeslots inside isr_setup_status_phase and isr_get_status_response, in which the lock got released just before acquired again inside usb_ep_queue. Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Reviewed-by: Peter Chen <peter.chen@freescale.com> Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-03-30usb: chipidea: udc: don't truncate requests to single tdsMichael Grzeschik
It is not safe to truncate requests to the maximum possible size the controller can handle with one td and to keep working. That patch fixes that with proper error handling instead. Reported-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de> Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-03-30usb: chipidea: udc: read status of td only once in hardware_dequeueMichael Grzeschik
This patch changes the read of the td status to one atomic operation to analyse coherent bits. Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de> [Alex: fixed backwards endianness conversion] Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-03-30usb: chipidea: udc: move ZLT flag change to ep_enableMichael Grzeschik
Its not necessary and also not specified in the datasheet to change the ZLT flag before every ep_prime. This patch moves this to the ep_enable and applies it only for non configuration endpoints. Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de> Reviewed-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-03-30usb: chipidea: udc: rework ep_enable cap settingMichael Grzeschik
This patch reworks the cap value from several read and write operations to one single operation. Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de> Reviewed-by: Felipe Balbi <balbi@ti.com> [Alex: removed useless isoc-related bit of code] Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-03-30usb: chipidea: udc: only clear active and halted bits in qheadMichael Grzeschik
The datasheet of the synopsys core describes only to overwrite the active and halted bits in the qhead before priming any endpoint. Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de> Reviewed-by: Felipe Balbi <balbi@ti.com> [Alex: fixed a case of line-too-long] Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-03-30usb: chipidea: big-endian supportSvetoslav Neykov
Convert between big-endian and little-endian format when accessing the usb controller structures which are little-endian by specification. Fix cases where the little-endian memory layout is taken for granted. The patch doesn't have any effect on the already supported little-endian architectures. Signed-off-by: Svetoslav Neykov <svetoslav@neykov.name> [Alex: minor cosmetic fixes] Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-03-30usb: chipidea: make pci platform datas staticAlexander Shishkin
PCI chipideas' platform datas are not static as all such things should be. Fix it. Reported-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-03-30usb: chipidea: usbmisc: add post handling and errata fix for mx25Michael Grzeschik
This adds a post handling routine which is called after ci13xxx_add_device was called. The first user is the mx25, which has to disable the external-vbus-divider after the udc has started. Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> [Alex: also fixed a signed one-bit bitfield a whitespace error and yet another set of line-too-long and void pointer casting errors] Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-03-30usb: chipidea: usbmisc: add mx53 supportMichael Grzeschik
This adds mx53 as the next user of the usbmisc driver and makes it possible to disable the overcurrent-detection of the internal phy. Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> [Alex: fixed another set of line-too-long and void pointer cast] Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-03-30usb: chipidea: usbmisc: prepare driver to handle more than one socMarc Kleine-Budde
This attaches the usbmisc_ops to the of_device_id data and makes it possible to define special functions per soc. Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de> [Alex: fixed one case of line-too-long and one bogus cast to void ptr] Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-03-30usb: chipidea: usbmisc: fix a potential race conditionMarc Kleine-Budde
This fixes a potential race condition where the ci13xxx_imx glue code could be fast enough to call one of the usbmisc_ops before he got a valid value on the static usbmisc pointer. To fix that we first set usbmisc, then call usbmisc_set_ops(). Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de> Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-03-30usb: chipidea: usbmisc: unset global varibale usbmisc on driver removeMarc Kleine-Budde
The probe function checks usbmisc to be NULL in the beginning. Without this patch the can only be loaded once. Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de> Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-03-30usb: chipidea: usbmisc: rename file, struct and functions to usbmisc_imxMichael Grzeschik
This driver will be used for every Freescale SoC which has this misc memory layout to control the basic usb handling. So better name this driver, function and struct names in a more generic way. Reported-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-03-30usb: chipidea: don't redefine __ffs()Felipe Balbi
chipidea's ffs_nr() is pretty much what __ffs() does. Use that one instead. Signed-off-by: Felipe Balbi <balbi@ti.com> [rebased on top of debug infrastructure rework] Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-03-30usb: chipidea: fix precedence bug in ci_requests_show()Dan Carpenter
The intent here was to have parenthesis around the (ci->hw_ep_max / 2) so that it counts like "0 1 2 0 1 2". In the current code, the mod operation happens first so it counts like "0 0 1 1 2 2". Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> [rebased on top of debug.c changes] Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-03-30usb: chipidea: move debug files creation/removal to the coreAlexander Shishkin
Create and remove debugfs entries in hdrc probe/remove instead of start/stop of the device controller. Gadget specific will not export anything while the controller is in host mode. Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-03-30usb: chipidea: move role to debugfsAlexander Shishkin
Manual role switching function is there for debugging purposes, so has to move to debugfs. Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-03-30usb: chipidea: convert debug entries in sysfs to debugfsAlexander Shishkin
Currently, we have a bunch of files in sysfs that display all sorts of debugging information for the device controller, so they have to move to debugfs where they belong. The "registers" interface have been removed, since it doesn't fit into the current driver design as is and it's hardly a good idea to touch the registers from userspace anyway. Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-03-30usb: chipidea: remove home-grown tracing facilityAlexander Shishkin
As part of the legacy from the original driver design, we retain home-grown tracing infrastructure, complete with own ring buffer and timestamps, which among other things has a performance penalty. This patch removes it. Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-03-29Revert "USB: chipidea: add vbus detect for udc"Peter Chen
There are several problems with this patch: + in introduces a sparse warning for a condition that's always negative, + and because of that, it actually doesn't do anything useful, + and vbus detection belongs to otg, not device function anyway. This reverts commit 8c4fc031954b4eb72daf13d3c907a985a3eee208. Signed-off-by: Peter Chen <peter.chen@freescale.com> [Alex: amended the above text] Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-03-29usb: chipidea: core: switch over to devm_ioremap_resourceFelipe Balbi
switch over to the newly added devm_ioremap_resource which provides more consistent error messages. Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-03-29usb: chipidea: trim include list in the coreAlexander Shishkin
Some headers included in the chipidea controller core are not needed, remove them. Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-03-29usb: chipidea: trim include list in udc codeAlexander Shishkin
Some headers included in udc core code are not actually needed, remove them and add irqreturn.h, which was implicitly included via irq.h. Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-03-29usb: chipidea: drop redundant includesAlexander Shishkin
debug.c is carrying a lot of includes that aren't needed there, although they implicitly include the ones that are actually needed. Replace the former with the latter. Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-03-20Merge branch 'usb-linus' into usb-nextGreg Kroah-Hartman
This is to pick up the fixes in that branch, and let Alan fix the merge error in drivers/usb/host/ehci-timer.c better than I just did (as I know I messed it up...) Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-03-18usb: chipidea: udc: don't assign gadget.dev.release directlyFelipe Balbi
udc-core provides a better way to handle release methods, let's use it. Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-03-18usb: gadget: chipidea: remove unnecessary initializationsFelipe Balbi
udc-core now sets dma-related and parent fields for us, we don't need to do it ourselves. Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-03-18usb: gadget: drop now unnecessary flagFelipe Balbi
We don't need the ->register_my_device flag anymore because all UDC drivers have been properly converted. Let's remove every history of it. Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-03-18usb: chipidea: let udc-core manage gadget->devFelipe Balbi
By simply setting a flag, we can drop some boilerplate code. Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-03-15usb: chipidea: usbmisc_imx6q: Staticize usbmisc_imx6q_drv_init/exit()Fabio Estevam
Staticize usbmisc_imx6q_drv_init/exit() to fix the following sparse warnings: drivers/usb/chipidea/usbmisc_imx6q.c:147:12: warning: symbol 'usbmisc_imx6q_drv_init' was not declared. Should it be static? drivers/usb/chipidea/usbmisc_imx6q.c:153:13: warning: symbol 'usbmisc_imx6q_drv_exit' was not declared. Should it be static? Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-03-04usb: chipidea: register debugging sysfs on our deviceFelipe Balbi
Don't register anything non-generic under the gadget's device as we don't really *own* it. Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-02-22Merge branch 'core-locking-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull core locking changes from Ingo Molnar: "The biggest change is the rwsem lock-steal improvements, both to the assembly optimized and the spinlock based variants. The other notable change is the clean up of the seqlock implementation to be based on the seqcount infrastructure. The rest is assorted smaller debuggability, cleanup and continued -rt locking changes." * 'core-locking-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: rwsem-spinlock: Implement writer lock-stealing for better scalability futex: Revert "futex: Mark get_robust_list as deprecated" generic: Use raw local irq variant for generic cmpxchg lockdep: Selftest: convert spinlock to raw spinlock seqlock: Use seqcount infrastructure seqlock: Remove unused functions ntp: Make ntp_lock raw intel_idle: Convert i7300_idle_lock to raw_spinlock locking: Various static lock initializer fixes lockdep: Print more info when MAX_LOCK_DEPTH is exceeded rwsem: Implement writer lock-stealing for better scalability lockdep: Silence warning if CONFIG_LOCKDEP isn't set watchdog: Use local_clock for get_timestamp() lockdep: Rename print_unlock_inbalance_bug() to print_unlock_imbalance_bug() locking/stat: Fix a typo
2013-02-21Merge tag 'usb-3.9-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB patches from Greg Kroah-Hartman: "Here's the big USB merge for 3.9-rc1 Nothing major, lots of gadget fixes, and of course, xhci stuff. All of this has been in linux-next for a while, with the exception of the last 3 patches, which were reverts of patches in the tree that caused problems, they went in yesterday." * tag 'usb-3.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (190 commits) Revert "USB: EHCI: make ehci-vt8500 a separate driver" Revert "USB: EHCI: make ehci-orion a separate driver" Revert "USB: update host controller Kconfig entries" USB: update host controller Kconfig entries USB: EHCI: make ehci-orion a separate driver USB: EHCI: make ehci-vt8500 a separate driver USB: usb-storage: unusual_devs update for Super TOP SATA bridge USB: ehci-omap: Fix autoloading of module USB: ehci-omap: Don't free gpios that we didn't request USB: option: add Huawei "ACM" devices using protocol = vendor USB: serial: fix null-pointer dereferences on disconnect USB: option: add Yota / Megafon M100-1 4g modem drivers/usb: add missing GENERIC_HARDIRQS dependencies USB: storage: properly handle the endian issues of idProduct testusb: remove all mentions of 'usbfs' usb: gadget: imx_udc: make it depend on BROKEN usb: omap_control_usb: fix compile warning ARM: OMAP: USB: Add phy binding information ARM: OMAP2: MUSB: Specify omap4 has mailbox ARM: OMAP: devices: create device for usb part of control module ...
2013-02-19locking: Various static lock initializer fixesThomas Gleixner
The static lock initializers want to be fed the proper name of the lock and not some random string. In mainline random strings are obfuscating the readability of debug output, but for RT they prevent the spinlock substitution. Fix it up. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2013-01-30USB: chipidea: ci13xxx_imx: Remove sparse warningFabio Estevam
Remove the following sparse warning: drivers/usb/chipidea/ci13xxx_imx.h:22:25: error: dubious one-bit signed bitfield drivers/usb/chipidea/ci13xxx_imx.h:22:25: error: dubious one-bit signed bitfield Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-22usb: Convert to devm_ioremap_resource()Thierry Reding
Convert all uses of devm_request_and_ioremap() to the newly introduced devm_ioremap_resource() which provides more consistent error handling. devm_ioremap_resource() provides its own error messages so all explicit error messages can be removed from the failure code paths. Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de> Acked-by: Alan Stern <stern@rowland.harvard.edu> Acked-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-21drivers/usb/chipidea/core.c: adjust duplicate testJulia Lawall
Delete successive tests to the same location. In this case res has already been tested for being NULL, and calling devm_request_and_ioremap will not make it NULL. On the other hand, devm_request_and_ioremap can return NULL on failure. A simplified version of the semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @s exists@ local idexpression y; expression x,e; @@ *if ( \(x == NULL\|IS_ERR(x)\|y != 0\) ) { ... when forall return ...; } ... when != \(y = e\|y += e\|y -= e\|y |= e\|y &= e\|y++\|y--\|&y\) when != \(XT_GETPAGE(...,y)\|WMI_CMD_BUF(...)\) *if ( \(x == NULL\|IS_ERR(x)\|y != 0\) ) { ... when forall return ...; } // </smpl> Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-11usb: chipidea: Allow disabling streaming not only in udc modeFabio Estevam
When running a scp transfer using a USB/Ethernet adapter the following crash happens: $ scp test.tar.gz fabio@192.168.1.100:/home/fabio fabio@192.168.1.100's password: test.tar.gz 0% 0 0.0KB/s --:-- ETA ------------[ cut here ]------------ WARNING: at net/sched/sch_generic.c:255 dev_watchdog+0x2cc/0x2f0() NETDEV WATCHDOG: eth0 (asix): transmit queue 0 timed out Modules linked in: Backtrace: [<80011c94>] (dump_backtrace+0x0/0x10c) from [<804d3a5c>] (dump_stack+0x18/0x1c) r6:000000ff r5:80412388 r4:80685dc0 r3:80696cc0 [<804d3a44>] (dump_stack+0x0/0x1c) from [<80021868>] (warn_slowpath_common+0x54/0x6c) [<80021814>] (warn_slowpath_common+0x0/0x6c) from [<80021924>] (warn_slowpath_fmt+0x38/0x40) ... Setting SDIS (Stream Disable Mode- bit 4 of USBMODE register) fixes the problem. However, in current code CI13XXX_DISABLE_STREAMING flag is only set in udc mode, so allow disabling streaming also in host mode. Tested on a mx6qsabrelite board. Suggested-by: Peter Chen <peter.chen@freescale.com> Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Reviewed-by: Peter Chen <peter.chen@freescale.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-26USB: chipidea: fix use after free bugLothar Waßmann
The pointer to a platform_device struct must not be dereferenced after the device has been unregistered. This bug produces a crash when unloading the ci13xxx kernel module compiled with CONFIG_PAGE_POISONING enabled. Signed-off-by: Lothar Waßmann <LW@KARO-electronics.de> Cc: stable <stable@vger.kernel.org> # 3.6 Acked-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-05-22 18:29:50 +0000