| Age | Commit message (Collapse) | Author |
|---|
|
commit 886c7c426d465732ec9d1b2bbdda5642fc2e7e05 upstream.
When using dt resources retrieval (interrupts and reg properties) there is
no predefined order for these resources in the platform dev resource
table. Also don't expect the number of resource to be always 2.
Signed-off-by: Jean-Jacques Hiblot <jjhiblot@traphandler.com>
Acked-by: Boris BREZILLON <b.brezillon@overkiz.com>
Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 9c1b70361e0b38e4acb8e62b54da66538cb77ff2 upstream.
It was impossible to enumerate on a SuperSpeed (XHCI) host
with alternate setting = 1 due to the wrongly set 'bMaxBurst'
field in the SuperSpeed Endpoint Companion descriptor.
Testcase:
<host> modprobe -r usbtest; modprobe usbtest alt=1
<device> modprobe g_zero
plug device to SuperSpeed port on the host.
Without this patch the host always complains like so
"usb 12-2: Not enough bandwidth for new device state.
usb 12-2: Not enough bandwidth for altsetting 1"
Bug was introduced by commit cf9a08ae in v3.9
Fixes: cf9a08ae5aec (usb: gadget: convert source sink and loopback to
new function interface)
Reviewed-by: Felipe Balbi <balbi@ti.com>
Acked-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Roger Quadros <rogerq@ti.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit d8eb6c653ef6b323d630de3c5685478469e248bc upstream.
commit 511f3c5 (usb: gadget: udc-core: fix a regression during gadget driver
unbinding) introduced a crash when DEBUG is enabled.
The debug trace in the atmel_usba_stop function made the assumption that the
driver pointer passed in parameter was not NULL, but since the commit above,
such assumption was no longer always true.
This commit now uses the driver pointer stored in udc which fixes this
issue.
[ balbi@ti.com : improved commit log a bit ]
Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit aba37fd975f0dd58e025c99c2a79b61b20190831 upstream.
This makes sure that the name coming out of configfs cannot be used
accidentally as a format string.
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit a9c3f68f3cd8d55f809fbdb0c138ed061ea1bd25 upstream.
The user-settable knob, low_latency, has been the source of
several BUG reports which stem from flush_to_ldisc() running
in interrupt context. Since 3.12, which added several sleeping
locks (termios_rwsem and buf->lock) to the input processing path,
the frequency of these BUG reports has increased.
Note that changes in 3.12 did not introduce this regression;
sleeping locks were first added to the input processing path
with the removal of the BKL from N_TTY in commit
a88a69c91256418c5907c2f1f8a0ec0a36f9e6cc,
'n_tty: Fix loss of echoed characters and remove bkl from n_tty'
and later in commit 38db89799bdf11625a831c5af33938dcb11908b6,
'tty: throttling race fix'. Since those changes, executing
flush_to_ldisc() in interrupt_context (ie, low_latency set), is unsafe.
However, since most devices do not validate if the low_latency
setting is appropriate for the context (process or interrupt) in
which they receive data, some reports are due to misconfiguration.
Further, serial dma devices for which dma fails, resort to
interrupt receiving as a backup without resetting low_latency.
Historically, low_latency was used to force wake-up the reading
process rather than wait for the next scheduler tick. The
effect was to trim multiple milliseconds of latency from
when the process would receive new data.
Recent tests [1] have shown that the reading process now receives
data with only 10's of microseconds latency without low_latency set.
Remove the low_latency rx steering from tty_flip_buffer_push();
however, leave the knob as an optional hint to drivers that can
tune their rx fifos and such like. Cleanup stale code comments
regarding low_latency.
[1] https://lkml.org/lkml/2014/2/20/434
"Yay.. thats an annoying historical pain in the butt gone."
-- Alan Cox
Reported-by: Beat Bolli <bbolli@ewanet.ch>
Reported-by: Pavel Roskin <proski@gnu.org>
Acked-by: David Sterba <dsterba@suse.cz>
Cc: Grant Edwards <grant.b.edwards@gmail.com>
Cc: Stanislaw Gruszka <sgruszka@redhat.com>
Cc: Hal Murray <murray+fedora@ip-64-139-1-69.sjc.megapath.net>
Signed-off-by: Peter Hurley <peter@hurleysoftware.com>
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Here are some of the build fixes we're using at Linaro.
I suspect much of this is incorrect, but wanted to submit it
as a starting place to get things fixed.
Change-Id: Id471d3004eef2aa2a6317950f434ad2b549b9dfc
Signed-off-by: John Stultz <john.stultz@linaro.org>
|
|
Change-Id: I2f9b12e1e0cdfe64ffe20db78d319a6221821184
Signed-off-by: Greg Hackmann <ghackmann@google.com>
|
|
- In the current implementation, when a signal is sent to the reading process,
read is cancelled by calling usb_ep_dequeue, which lead into calling
acc_complete_out with ECONNRESET, but the current logic treats it as
disconnection, which makes the device inaccessible until cable is actually
disconnected.
- The fix calls disconnect only when ESHUTDOWN error is passed.
- If data has already arrived while trying cancelling, the data is marked
as available, and it will be read out on the next read. This is necessary
as USB bulk is assumed to guarantee no data loss.
Signed-off-by: keunyoung <keunyoung@google.com>
|
|
Move the most of linux/usb/f_mtp.h header to uapi. Move the only
remaining structure definition into f_mtp.c, the only place that
uses it.
Change-Id: I952c1a9dc15c36bf295a0eb4d74b6b1ad912ed03
Signed-off-by: Colin Cross <ccross@android.com>
|
|
Make sure the android0 device is removed before we can destroy
the class.
Change-Id: Id584888c407beb80a1df4990f73fe31ccb9d4767
Signed-off-by: Benoit Goby <benoit@android.com>
|
|
Android MTP gadget uses 3 endpoints which are 1 in endpoint,
1 out endpoint, and 1 interrupt endpoint. However when MTP
gadget creates its endpoints, it creates the out endpoint twice
and overwrites the first created out endpoint with the second one,
so that it causes a leak of endpoint resources.
Change-Id: Iba82950095610b26b362f4b10a67cedfb1fee366
Signed-off-by: Peter Oh <poh@broadcom.com>
Reviewed-on: http://mps-gerrit.broadcom.com/37744
Reviewed-by: Graham Williams <gwilli@broadcom.com>
Reviewed-by: John Garry <jgarry@broadcom.com>
Branch-Open: Branch Status <branch_status_noreply@broadcom.com>
Reviewed-by: Checkpatch Status <checkpatch_status_noreply@broadcom.com>
Reviewed-by: Joyjit Nath <joyjit@broadcom.com>
Tested-by: AutoSubmit Status <autosubmit_status_noreply@broadcom.com>
|
|
Signed-off-by: Arve Hjønnevåg <arve@android.com>
|
|
gserial_alloc_line crashes when called from module_init
Signed-off-by: Arve Hjønnevåg <arve@android.com>
|
|
Signed-off-by: Arve Hjønnevåg <arve@android.com>
|
|
Removed obsolete f_adb function
Change-Id: Idfb4110429bc0ea63f493c68ad667f49ca471987
Signed-off-by: Benoit Goby <benoit@android.com>
|
|
The Android gadget driver disconnects the gadget on bind
and expects the gadget to stay disconnected until it calls
usb_gadget_connect when userspace is ready. Removed the call
to usb_gadget_connect in usb_gadget_probe_driver to avoid
enabling the pullup before userspace is ready.
Change-Id: I63707ac6e16a44eca52351a4bf80407d25fbd35e
Signed-off-by: Benoit Goby <benoit@android.com>
|
|
Signed-off-by: Arve Hjønnevåg <arve@android.com>
|
|
create_bulk_endpoints should not be __init since it is called when
accessory is enabled.
Change-Id: Iac6e9f29d53c93760e926efd8e7603432632acb4
Signed-off-by: Todd Poynor <toddpoynor@google.com>
|
|
ffs_func_eps_enable always take the highspeed usb_endpoint_descriptor
if it is available. Choose the correct usb_endpoint_descriptor
depending on the gadget speed instead.
Change-Id: I5b8444cfdf1b6fe1eef25525fb7a0a0f617a353e
Signed-off-by: Benoit Goby <benoit@android.com>
|
|
This driver presents a standard USB audio class interface to the host
and an ALSA PCM device to userspace
Change-Id: If16b14a5ff27045f9cb2daaf1ae9195c5eeab7d0
Signed-off-by: Mike Lockwood <lockwood@google.com>
|
|
Change-Id: I4f1452db32508382df52acdc47c0eb395ae328c7
Signed-off-by: Mike Lockwood <lockwood@google.com>
|
|
The control request will be used by the host to enable/disable USB audio
and the ioctl will be used by userspace to read the audio mode
Change-Id: I81c38611b588451e80eacdccc417ca6e11c60cab
Signed-off-by: Mike Lockwood <lockwood@google.com>
|
|
create_bulk_endpoints should not be __init since it is called when
accessory is enabled
Change-Id: If827a4531f0f6c15af938345163923186368e2a5
Signed-off-by: Benoit Goby <benoit@android.com>
|
|
Add support for FunctionFS (ffs) to implement usb functions in userspace.
The aliases property stores the list of functions that are implemented
using functionfs.
For example:
echo "adb,mtp" > /sys/class/android_usb/android0/f_ffs/aliases
Then when the function are enabled:
echo "adb,acm" > /sys/class/android_usb/android0/functions
Internally, ffs and acm will be used.
Change-Id: I44117b183d48a5a99ddbee3ef2cf8998be74598e
Signed-off-by: Benoit Goby <benoit@android.com>
|
|
Product names may contain spaces and scanf %s only matches the 1st word.
Use strlcpy instead.
Change-Id: Ie8703fea9775f7fc17fe615a42597ca3816d36b0
Signed-off-by: Benoit Goby <benoit@android.com>
|
|
Remove the config from the configs list before releasing the spinlock.
Otherwise the other cpu might be processing a SET_CONFIGURATION that
will switch to the configuration that is being released.
Change-Id: Id4da0d0e18ead63e20cb236cd1d3e8e6d116acce
Signed-off-by: Benoit Goby <benoit@android.com>
|
|
When adb is enabled, only connect the gadget when adbd is ready. If adbd
dies or is restarted (e.g. "adb root"), the gadget is disconnected when
the adb device is close, and it is re-connected once adb re-open the
device.
- Add callbacks to adb, similar to FunctionFs callbacks, to notify the
gadget when the daemon is ready or closed.
- Refcount calls to android_enable/android_disable to enable the gadget
only once all the function daemons are ready.
- Add enable/disble to android_usb_function to notify the function when
it is added/removed from the list of enabled functions.
Change-Id: Id54ff85aec9cf8715c94b4f9bd6137a79ad58bfc
Signed-off-by: Benoit Goby <benoit@android.com>
|
|
When an ep_out req is dequeued because of userspace freezing,
don't set the error flag.
Change-Id: I680f1a1059b8ac2244aaa069e7d42dc44abf98e9
Signed-off-by: Colin Cross <ccross@android.com>
|
|
wait_event_interruptible in adb_read might return -ERESTARTSYS if
userspace is frozen during adb_read or another signal is delivered
to adb. If so, don't set dev->error to avoid resetting the adb
connection.
Change-Id: I5a7baa013a9a3a3b5305de7e6a0d18546a560018
Signed-off-by: Colin Cross <ccross@android.com>
|
|
USB accessory mode allows users to connect USB host hardware
specifically designed for Android-powered devices. The accessories
must adhere to the Android accessory protocol outlined in the
http://accessories.android.com documentation. This allows
Android devices that cannot act as a USB host to still interact with
USB hardware. When an Android device is in USB accessory mode, the
attached Android USB accessory acts as the host, provides power
to the USB bus, and enumerates connected devices.
Signed-off-by: Mike Lockwood <lockwood@android.com>
|
|
Android Debug Bridge (adb) is a command line tool that lets
users communicate with a Android-powered device. It is used
mainly to debug applications and tranfer files. f_adb implements
the transport layer between the ADB Server (on the host) and the
ADBD daemon (on the device).
Signed-off-by: Mike Lockwood <lockwood@android.com>
|
|
USB gadget function driver used by the Android framework to
implement the MTP and PTP protocols. It creates a character device
that provides an interface for fast transfer of files and
supports transferring files greater than 4GB.
Signed-off-by: Mike Lockwood <lockwood@android.com>
|
|
The Android Gadget driver is a composite driver that allows
userspace to change at runtime the list of functions enabled in
its configuration and to configure these functions. It supports
multiple functions: acm, adb, rndis, mtp/ptp, mass storage and
accessory.
It is usually controlled by a daemon that changes the configuration
based on user settings. For example, rndis is enabled when the user
enables sharing the phone data connection and adb (Android Debug
Bridge) is only enabled when the user wants to debug applications
for security reasons.
As an example on how to use it, the following shell commands will
make the gadget disconnect from the host and make it be re-enumerated
as a composite with 1 rndis and 2 acm interfaces, and a different
product id:
echo 0 > /sys/class/android_usb/android0/enable
echo rndis,acm > /sys/class/android_usb/android0/functions
echo 2 > /sys/class/android_usb/android0/f_acm/instances
echo 2d01 > /sys/class/android_usb/android0/idProduct
echo 1 > /sys/class/android_usb/android0/enable
The driver requires a gadget controller that supports software
control of the D+ pullup and the controller driver must support
disabling the pullup during composite_bind.
Signed-off-by: Mike Lockwood <lockwood@android.com>
Signed-off-by: Benoit Goby <benoit@android.com>
|
|
Fix possible NULL pointer dereference introduced in
commit 219580e (usb: f_fs: check quirk to pad epout
buf size when not aligned to maxpacketsize)
In cases we do wait with:
wait_event_interruptible(epfile->wait, (ep = epfile->ep));
for endpoint to be enabled, functionfs_bind() has not been called yet
and epfile->ffs->gadget is still NULL and the automatic variable 'gadget'
has been initialized with NULL at the point of its definition.
Later on it is used as a parameter to:
usb_ep_align_maybe(gadget, ep->ep, len)
which in turn dereferences it.
This patch fixes it by moving the actual assignment to the local 'gadget'
variable after the potential waiting has completed.
Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@samsung.com>
Acked-by: Michal Nazarewicz <mina86@mina86.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
|
|
We need to use gadget_is_otg to check if the gadget is really
otg support at runtime, other composite gadget drivers have already
followed this method.
Signed-off-by: Peter Chen <peter.chen@freescale.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
|
|
Commit 3dc6475 ("bcm63xx_enet: add support Broadcom BCM6345 Ethernet")
changed the ENETDMA[CS] macros such that they are no longer macros, but
actual register offset definitions. The bcm63xx_udc driver was not
updated, and as a result, causes the following build error to pop up:
CC drivers/usb/gadget/u_ether.o
drivers/usb/gadget/bcm63xx_udc.c: In function 'iudma_write':
drivers/usb/gadget/bcm63xx_udc.c:642:24: error: called object '0' is not
a function
drivers/usb/gadget/bcm63xx_udc.c: In function 'iudma_reset_channel':
drivers/usb/gadget/bcm63xx_udc.c:698:46: error: called object '0' is not
a function
drivers/usb/gadget/bcm63xx_udc.c:700:49: error: called object '0' is not
a function
Fix this by updating usb_dmac_{read,write}l and usb_dmas_{read,write}l to
take an extra channel argument, and use the channel width
(ENETDMA_CHAN_WIDTH) to offset the register we want to access, hence
doing again what the macro implicitely did for us.
Cc: Kevin Cernekee <cernekee@gmail.com>
Cc: Jonas Gorski <jogo@openwrt.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Florian Fainelli <florian@openwrt.org>
Signed-off-by: Felipe Balbi <balbi@ti.com>
|
|
Pass value instead of address as expected by 'usb_ep_set_maxpacket_limit'.
Fixes the following compilation error introduced by commit e117e742d310
("usb: gadget: add "maxpacket_limit" field to struct usb_ep"):
drivers/usb/gadget/s3c2410_udc.c: In function ‘s3c2410_udc_reinit’:
drivers/usb/gadget/s3c2410_udc.c:1632:3: error:
cannot take address of bit-field ‘maxpacket’
usb_ep_set_maxpacket_limit(&ep->ep, &ep->ep.maxpacket);
Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Reviewed-by: Robert Baldyga <r.baldyga@samsung.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC cleanups from Olof Johansson:
"This is the branch where we usually queue up cleanup efforts, moving
drivers out of the architecture directory, header file restructuring,
etc. Sometimes they tangle with new development so it's hard to keep
it strictly to cleanups.
Some of the things included in this branch are:
* Atmel SAMA5 conversion to common clock
* Reset framework conversion for tegra platforms
- Some of this depends on tegra clock driver reworks that are shared
with Mike Turquette's clk tree.
* Tegra DMA refactoring, which are shared branches with the DMA tree.
* Removal of some header files on exynos to prepare for
multiplatform"
* tag 'cleanup-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (169 commits)
ARM: mvebu: move Armada 370/XP specific definitions to armada-370-xp.h
ARM: mvebu: remove prototypes of non-existing functions from common.h
ARM: mvebu: move ARMADA_XP_MAX_CPUS to armada-370-xp.h
serial: sh-sci: Rework baud rate calculation
serial: sh-sci: Compute overrun_bit without using baud rate algo
serial: sh-sci: Remove unused GPIO request code
serial: sh-sci: Move overrun_bit and error_mask fields out of pdata
serial: sh-sci: Support resources passed through platform resources
serial: sh-sci: Don't check IRQ in verify port operation
serial: sh-sci: Set the UPF_FIXED_PORT flag
serial: sh-sci: Remove duplicate interrupt check in verify port op
serial: sh-sci: Simplify baud rate calculation algorithms
serial: sh-sci: Remove baud rate calculation algorithm 5
serial: sh-sci: Sort headers alphabetically
ARM: EXYNOS: Kill exynos_pm_late_initcall()
ARM: EXYNOS: Consolidate selection of PM_GENERIC_DOMAINS for Exynos4
ARM: at91: switch Calao QIL-A9260 board to DT
clk: at91: fix pmc_clk_ids data type attriubte
PM / devfreq: use inclusion <mach/map.h> instead of <plat/map-s5p.h>
ARM: EXYNOS: remove <mach/regs-clock.h> for exynos
...
|
|
None of these files are actually using any __init type directives
and hence don't need to include <linux/init.h>. Most are just a
left over from __devinit and __cpuinit removal, or simply due to
code getting copied from one driver to the next.
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The variable 'dev' is initialized but never used
otherwise, so remove the unused variable.
Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Remove duplicated include.
Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Linux 3.13-rc4
|
|
commit e117e742 (usb: gadget: add "maxpacket_limit"
field to struct usb_ep) added a build warning to
at91_udc when it passed the wrong argument to
usb_ep_set_maxpacket_limit().
Fix this by passing correct argument.
Signed-off-by: Felipe Balbi <balbi@ti.com>
|
|
This adds an UDC driver for GRUSBDC USB Device Controller cores available in the
GRLIB VHDL IP core library. The driver only supports DMA mode.
Signed-off-by: Andreas Larsson <andreas@gaisler.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
|
|
Adds support for querying the phy bus width from the generic phy
subsystem. Configure UTMI bus width in GUSBCFG based on this value.
Signed-off-by: Matt Porter <mporter@linaro.org>
Acked-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
|
|
Adds support for the generic PHY subsystem. Generic PHY
support is probed and then the driver falls back to checking
for an old style USB PHY and pdata if not found.
Signed-off-by: Matt Porter <mporter@linaro.org>
Signed-off-by: Felipe Balbi <balbi@ti.com>
|
|
Enable support for the dwc2 binding.
Signed-off-by: Matt Porter <mporter@linaro.org>
Signed-off-by: Felipe Balbi <balbi@ti.com>
|
|
Remove unused Samsung-specific machine include and Kconfig
dependency on S3C.
Signed-off-by: Matt Porter <mporter@linaro.org>
Reviewed-by: Markus Mayer <markus.mayer@linaro.org>
Reviewed-by: Tim Kryger <tim.kryger@linaro.org>
Signed-off-by: Felipe Balbi <balbi@ti.com>
|
|
These two gadget drivers said that their #endif was for
CONFIG_USB_DEBUG, but they really were not, so fix them up to be
correct.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Felipe Balbi <balbi@ti.com>
|
|
From 7e827a0d300e084f74c65122baa5e3193f9a7f18 Mon Sep 17 00:00:00 2001
From: "Du, Changbin" <changbinx.du@intel.com>
Date: Mon, 16 Dec 2013 20:32:13 +0800
Subject: [PATCH] usb/gadget: should use u16 type variable to store MaxPower
The MaxPower field is of u16 type. So using u8 type variable can break
data (high byte lost).
Signed-off-by: Du, Changbin <changbinx.du@intel.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
|
