aboutsummaryrefslogtreecommitdiff
path: root/drivers/usb/serial
AgeCommit message (Collapse)Author
2014-06-18USB: io_ti: fix firmware download on big-endian machines (part 2)Johan Hovold
commit c03890ff5e24a4bf59059f2d179f427559b7330a upstream. A recent patch that purported to fix firmware download on big-endian machines failed to add the corresponding sparse annotation to the i2c-header. This was reported by the kbuild test robot. Adding the appropriate annotation revealed another endianess bug related to the i2c-header Size-field in a code path that is exercised when the firmware is actually being downloaded (and not just verified and left untouched unless older than the firmware at hand). This patch adds the required sparse annotation to the i2c-header and makes sure that the Size-field is sent in little-endian byte order during firmware download also on big-endian machines. Note that this patch is only compile-tested, but that there is no functional change for little-endian systems. Reported-by: kbuild test robot <fengguang.wu@intel.com> Cc: Ludovic Drolez <ldrolez@debian.org> Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-06-18USB: serial: option: add support for Novatel E371 PCIe cardAlexej Starschenko
commit 8a61ba3a47ac39f660702aa66a172185dd605a86 upstream. Adds product ID for the Novatel E371 PCI Express Mini Card. $ lsusb Bus 001 Device 024: ID 1410:9011 Novatel Wireless $ usb-devices T: Bus=01 Lev=01 Prnt=01 Port=03 Cnt=01 Dev#= 24 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=1410 ProdID=9011 Rev=00.03 S: Manufacturer=Novatel Wireless, Inc. S: Product=Novatel Wireless HSPA S: SerialNumber=012773002115811 C: #Ifs= 6 Cfg#= 1 Atr=e0 MxPwr=500mA I: If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=option I: If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option I: If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option I: If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option I: If#= 6 Alt= 0 #EPs= 1 Cls=02(commc) Sub=06 Prot=00 Driver=cdc_ether I: If#= 7 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=cdc_ether Tested with kernel 3.2.0. Signed-off-by: Alexej Starschenko <starschenko@gmail.com> Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-06-18USB: ftdi_sio: add NovaTech OrionLXm product IDGeorge McCollister
commit d0839d757e6294921c31b1c4ca4f1dcc5df63bcd upstream. The NovaTech OrionLXm uses an onboard FTDI serial converter for JTAG and console access. Here is the lsusb output: Bus 004 Device 123: ID 0403:7c90 Future Technology Devices International, Ltd Signed-off-by: George McCollister <george.mccollister@gmail.com> Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-06-18usb: qcserial: add a number of Dell devicesBjørn Mork
commit 4d7c0136a54f62501f8a34c4d08a5e0258d3d3ca upstream. Dan writes: "The Dell drivers use the same configuration for PIDs: 81A2: Dell Wireless 5806 Gobi(TM) 4G LTE Mobile Broadband Card 81A3: Dell Wireless 5570 HSPA+ (42Mbps) Mobile Broadband Card 81A4: Dell Wireless 5570e HSPA+ (42Mbps) Mobile Broadband Card 81A8: Dell Wireless 5808 Gobi(TM) 4G LTE Mobile Broadband Card 81A9: Dell Wireless 5808e Gobi(TM) 4G LTE Mobile Broadband Card These devices are all clearly Sierra devices, but are also definitely Gobi-based. The A8 might be the MC7700/7710 and A9 is likely a MC7750. >From DellGobi5kSetup.exe from the Dell drivers: usbif0: serial/firmware loader? usbif2: nmea usbif3: modem/ppp usbif8: net/QMI" Reported-by: AceLan Kao <acelan.kao@canonical.com> Reported-by: Dan Williams <dcbw@redhat.com> Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-06-18usb: option: add and update a number of CMOTech devicesBjørn Mork
commit 34f972d6156fe9eea2ab7bb418c71f9d1d5c8e7b upstream. A number of older CMOTech modems are based on Qualcomm chips. The blacklisted interfaces are QMI/wwan. Reported-by: Lars Melin <larsm17@gmail.com> Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-06-18usb: option: add Alcatel L800MABjørn Mork
commit dd6b48ecec2ea7d15f28d5e5474388681899a5e1 upstream. Device interface layout: 0: ff/ff/ff - serial 1: ff/00/00 - serial AT+PPP 2: ff/ff/ff - QMI/wwan 3: 08/06/50 - storage Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-06-18usb: option: add Olivetti Olicard 500Bjørn Mork
commit 533b3994610f316e5cd61b56d0c4daa15c830f89 upstream. Device interface layout: 0: ff/ff/ff - serial 1: ff/ff/ff - serial AT+PPP 2: 08/06/50 - storage 3: ff/ff/ff - serial 4: ff/ff/ff - QMI/wwan Reported-by: Julio Araujo <julio.araujo@wllctel.com.br> Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-06-18usb: qcserial: add Sierra Wireless MC7305/MC7355Bjørn Mork
commit bce4f588f19d59fc07fadfeb0b2a3a06c942827a upstream. Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-06-18usb: qcserial: add Sierra Wireless MC73xxBjørn Mork
commit 70a3615fc07c2330ed7c1e922f3c44f4a67c0762 upstream. Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-06-18usb: qcserial: add Sierra Wireless EM7355Bjørn Mork
commit a00986f81182a69dee4d2c48e8c19805bdf0f790 upstream. Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-06-18USB: io_ti: fix firmware download on big-endian machinesJohan Hovold
commit 5509076d1b4485ce9fb07705fcbcd2695907ab5b upstream. During firmware download the device expects memory addresses in big-endian byte order. As the wIndex parameter which hold the address is sent in little-endian byte order regardless of host byte order, we need to use swab16 rather than cpu_to_be16. Also make sure to handle the struct ti_i2c_desc size parameter which is returned in little-endian byte order. Reported-by: Ludovic Drolez <ldrolez@debian.org> Tested-by: Ludovic Drolez <ldrolez@debian.org> Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-06-18USB: serial: fix sysfs-attribute removal deadlockJohan Hovold
commit 10164c2ad6d2c16809f6c09e278f946e47801b3a upstream. Fix driver new_id sysfs-attribute removal deadlock by making sure to not hold any locks that the attribute operations grab when removing the attribute. Specifically, usb_serial_deregister holds the table mutex when deregistering the driver, which includes removing the new_id attribute. This can lead to a deadlock as writing to new_id increments the attribute's active count before trying to grab the same mutex in usb_serial_probe. The deadlock can easily be triggered by inserting a sleep in usb_serial_deregister and writing the id of an unbound device to new_id during module unload. As the table mutex (in this case) is used to prevent subdriver unload during probe, it should be sufficient to only hold the lock while manipulating the usb-serial driver list during deregister. A racing probe will then either fail to find a matching subdriver or fail to get the corresponding module reference. Since v3.15-rc1 this also triggers the following lockdep warning: ====================================================== [ INFO: possible circular locking dependency detected ] 3.15.0-rc2 #123 Tainted: G W ------------------------------------------------------- modprobe/190 is trying to acquire lock: (s_active#4){++++.+}, at: [<c0167aa0>] kernfs_remove_by_name_ns+0x4c/0x94 but task is already holding lock: (table_lock){+.+.+.}, at: [<bf004d84>] usb_serial_deregister+0x3c/0x78 [usbserial] which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #1 (table_lock){+.+.+.}: [<c0075f84>] __lock_acquire+0x1694/0x1ce4 [<c0076de8>] lock_acquire+0xb4/0x154 [<c03af3cc>] _raw_spin_lock+0x4c/0x5c [<c02bbc24>] usb_store_new_id+0x14c/0x1ac [<bf007eb4>] new_id_store+0x68/0x70 [usbserial] [<c025f568>] drv_attr_store+0x30/0x3c [<c01690e0>] sysfs_kf_write+0x5c/0x60 [<c01682c0>] kernfs_fop_write+0xd4/0x194 [<c010881c>] vfs_write+0xbc/0x198 [<c0108e4c>] SyS_write+0x4c/0xa0 [<c000f880>] ret_fast_syscall+0x0/0x48 -> #0 (s_active#4){++++.+}: [<c03a7a28>] print_circular_bug+0x68/0x2f8 [<c0076218>] __lock_acquire+0x1928/0x1ce4 [<c0076de8>] lock_acquire+0xb4/0x154 [<c0166b70>] __kernfs_remove+0x254/0x310 [<c0167aa0>] kernfs_remove_by_name_ns+0x4c/0x94 [<c0169fb8>] remove_files.isra.1+0x48/0x84 [<c016a2fc>] sysfs_remove_group+0x58/0xac [<c016a414>] sysfs_remove_groups+0x34/0x44 [<c02623b8>] driver_remove_groups+0x1c/0x20 [<c0260e9c>] bus_remove_driver+0x3c/0xe4 [<c026235c>] driver_unregister+0x38/0x58 [<bf007fb4>] usb_serial_bus_deregister+0x84/0x88 [usbserial] [<bf004db4>] usb_serial_deregister+0x6c/0x78 [usbserial] [<bf005330>] usb_serial_deregister_drivers+0x2c/0x4c [usbserial] [<bf016618>] usb_serial_module_exit+0x14/0x1c [sierra] [<c009d6cc>] SyS_delete_module+0x184/0x210 [<c000f880>] ret_fast_syscall+0x0/0x48 other info that might help us debug this: Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(table_lock); lock(s_active#4); lock(table_lock); lock(s_active#4); *** DEADLOCK *** 1 lock held by modprobe/190: #0: (table_lock){+.+.+.}, at: [<bf004d84>] usb_serial_deregister+0x3c/0x78 [usbserial] stack backtrace: CPU: 0 PID: 190 Comm: modprobe Tainted: G W 3.15.0-rc2 #123 [<c0015e10>] (unwind_backtrace) from [<c0013728>] (show_stack+0x20/0x24) [<c0013728>] (show_stack) from [<c03a9a54>] (dump_stack+0x24/0x28) [<c03a9a54>] (dump_stack) from [<c03a7cac>] (print_circular_bug+0x2ec/0x2f8) [<c03a7cac>] (print_circular_bug) from [<c0076218>] (__lock_acquire+0x1928/0x1ce4) [<c0076218>] (__lock_acquire) from [<c0076de8>] (lock_acquire+0xb4/0x154) [<c0076de8>] (lock_acquire) from [<c0166b70>] (__kernfs_remove+0x254/0x310) [<c0166b70>] (__kernfs_remove) from [<c0167aa0>] (kernfs_remove_by_name_ns+0x4c/0x94) [<c0167aa0>] (kernfs_remove_by_name_ns) from [<c0169fb8>] (remove_files.isra.1+0x48/0x84) [<c0169fb8>] (remove_files.isra.1) from [<c016a2fc>] (sysfs_remove_group+0x58/0xac) [<c016a2fc>] (sysfs_remove_group) from [<c016a414>] (sysfs_remove_groups+0x34/0x44) [<c016a414>] (sysfs_remove_groups) from [<c02623b8>] (driver_remove_groups+0x1c/0x20) [<c02623b8>] (driver_remove_groups) from [<c0260e9c>] (bus_remove_driver+0x3c/0xe4) [<c0260e9c>] (bus_remove_driver) from [<c026235c>] (driver_unregister+0x38/0x58) [<c026235c>] (driver_unregister) from [<bf007fb4>] (usb_serial_bus_deregister+0x84/0x88 [usbserial]) [<bf007fb4>] (usb_serial_bus_deregister [usbserial]) from [<bf004db4>] (usb_serial_deregister+0x6c/0x78 [usbserial]) [<bf004db4>] (usb_serial_deregister [usbserial]) from [<bf005330>] (usb_serial_deregister_drivers+0x2c/0x4c [usbserial]) [<bf005330>] (usb_serial_deregister_drivers [usbserial]) from [<bf016618>] (usb_serial_module_exit+0x14/0x1c [sierra]) [<bf016618>] (usb_serial_module_exit [sierra]) from [<c009d6cc>] (SyS_delete_module+0x184/0x210) [<c009d6cc>] (SyS_delete_module) from [<c000f880>] (ret_fast_syscall+0x0/0x48) Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-06-18Revert "USB: serial: add usbid for dell wwan card to sierra.c"Johan Hovold
commit 2e01280d2801c72878cf3a7119eac30077b463d5 upstream. This reverts commit 1ebca9dad5abe8b2ed4dbd186cd657fb47c1f321. This device was erroneously added to the sierra driver even though it's not a Sierra device and was already handled by the option driver. Cc: Richard Farina <sidhayn@gmail.com> Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-06-18usb: option driver, add support for Telit UE910v2Daniele Palmas
commit d6de486bc22255779bd54b0fceb4c240962bf146 upstream. option driver, added VID/PID for Telit UE910v2 modem Signed-off-by: Daniele Palmas <dnlplm@gmail.com> Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-06-18USB: serial: ftdi_sio: add id for Brainboxes serial cardsMichele Baldessari
commit efe26e16b1d93ac0085e69178cc18811629e8fc5 upstream. Custom VID/PIDs for Brainboxes cards as reported in https://bugzilla.redhat.com/show_bug.cgi?id=1071914 Signed-off-by: Michele Baldessari <michele@acksyn.org> Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-06-18USB: usb_wwan: fix handling of missing bulk endpointsJohan Hovold
commit bd73bd8831696f189a479a0712ae95208e513d7e upstream. Fix regression introduced by commit 8e493ca1767d ("USB: usb_wwan: fix bulk-urb allocation") by making sure to require both bulk-in and out endpoints during port probe. The original option driver (which usb_wwan is based on) was written under the assumption that either endpoint could be missing, but evidently this cannot have been tested properly. Specifically, it would handle opening a device without bulk-in (but would blow up during resume which was implemented later), but not a missing bulk-out in write() (although it is handled in some places such as write_room()). Fortunately (?), the driver also got the test for missing endpoints wrong so the urbs were in fact always allocated, although they would be initialised using the wrong endpoint address (0) and any submission of such an urb would fail. The commit mentioned above fixed the test for missing endpoints but thereby exposed the other bugs which would now generate null-pointer exceptions rather than failed urb submissions. The regression was introduced in v3.7, but the offending commit was also marked for stable. Reported-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: Johan Hovold <jhovold@gmail.com> Tested-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-06-18USB: cp210x: Add 8281 (Nanotec Plug & Drive)Tristan Bruns
commit 72b3007951010ce1bbf950e23b19d9839fa905a5 upstream. Signed-off-by: Tristan Bruns <tristan@tristanbruns.de> Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-06-18USB: pl2303: add ids for Hewlett-Packard HP POS pole displaysAaron Sanders
commit b16c02fbfb963fa2941b7517ebf1f8a21946775e upstream. Add device ids to pl2303 for the Hewlett-Packard HP POS pole displays: LD960: 03f0:0B39 LCM220: 03f0:3139 LCM960: 03f0:3239 [ Johan: fix indentation and sort PIDs numerically ] Signed-off-by: Aaron Sanders <aaron.sanders@hp.com> Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-02-26USB: ftdi_sio: add Cressi Leonardo PIDJoerg Dorchain
Hello, the following patch adds an entry for the PID of a Cressi Leonardo diving computer interface to kernel 3.13.0. It is detected as FT232RL. Works with subsurface. Signed-off-by: Joerg Dorchain <joerg@dorchain.net> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-02-18USB: serial: option: blacklist interface 4 for Cinterion PHS8 and PXS8Aleksander Morgado
This interface is to be handled by the qmi_wwan driver. CC: Hans-Christoph Schemmel <hans-christoph.schemmel@gemalto.com> CC: Christian Schmiedl <christian.schmiedl@gemalto.com> CC: Nicolaus Colberg <nicolaus.colberg@gemalto.com> CC: David McCullough <david.mccullough@accelecon.com> Signed-off-by: Aleksander Morgado <aleksander@aleksander.es> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-02-11usb: option: blacklist ZTE MF667 net interfaceRaymond Wanyoike
Interface #5 of 19d2:1270 is a net interface which has been submitted to the qmi_wwan driver so consequently remove it from the option driver. Signed-off-by: Raymond Wanyoike <raymond.wanyoike@gmail.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-02-05USB: ftdi_sio: add Tagsys RFID Reader IDsUlrich Hahn
Adding two more IDs to the ftdi_sio usb serial driver. It now connects Tagsys RFID readers. There might be more IDs out there for other Tagsys models. Signed-off-by: Ulrich Hahn <uhahn@eanco.de> Cc: Johan Hovold <johan@hovold.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-02-05usb: qcserial: add Netgear Aircard 340UBjørn Mork
This device was mentioned in an OpenWRT forum. Seems to have a "standard" Sierra Wireless ifnumber to function layout: 0: qcdm 2: nmea 3: modem 8: qmi 9: storage Cc: <stable@vger.kernel.org> Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-02-04USB: simple: add Dynastream ANT USB-m Stick device supportKristóf Ralovich
Add support for ANT USB-m Stick from Dynastream Innovations, by listing USB pid [34366.944805] usb 6-1: New USB device found, idVendor=0fcf, idProduct=1009 [34366.944817] usb 6-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [34366.944824] usb 6-1: Product: ANT USB-m Stick [34366.944831] usb 6-1: Manufacturer: Dynastream Innovations Device reported (https://code.google.com/p/antpm/issues/detail?id=5) to work through: $ modprobe usbserial vendor=0x0fcf product=0x1009 Signed-off-by: Kristóf Ralovich <kristof.ralovich@gmail.com> Signed-off-by: Johan Hovold <jhovold@gmail.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-02-04usb: ftdi_sio: add Mindstorms EV3 console adapterBjørn Mork
Cc: stable <stable@vger.kernel.org> Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-01-22Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial Pull trivial tree updates from Jiri Kosina: "Usual rocket science stuff from trivial.git" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (39 commits) neighbour.h: fix comment sched: Fix warning on make htmldocs caused by wait.h slab: struct kmem_cache is protected by slab_mutex doc: Fix typo in USB Gadget Documentation of/Kconfig: Spelling s/one/once/ mkregtable: Fix sscanf handling lp5523, lp8501: comment improvements thermal: rcar: comment spelling treewide: fix comments and printk msgs IXP4xx: remove '1 &&' from a condition check in ixp4xx_restart() Documentation: update /proc/uptime field description Documentation: Fix size parameter for snprintf arm: fix comment header and macro name asm-generic: uaccess: Spelling s/a ny/any/ mtd: onenand: fix comment header doc: driver-model/platform.txt: fix a typo drivers: fix typo in DEVTMPFS_MOUNT Kconfig help text doc: Fix typo (acces_process_vm -> access_process_vm) treewide: Fix typos in printk drivers/gpu/drm/qxl/Kconfig: reformat the help text ...
2014-01-10usb: core: allow a reference device for new_idWolfram Sang
Often, usb drivers need some driver_info to get a device to work. To have access to driver_info when using new_id, allow to pass a reference vendor:product tuple from which new_id will inherit driver_info. Signed-off-by: Wolfram Sang <wsa@the-dreams.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-01-08usb: delete non-required instances of include <linux/init.h>Paul Gortmaker
None of these files are actually using any __init type directives and hence don't need to include <linux/init.h>. Most are just a left over from __devinit and __cpuinit removal, or simply due to code getting copied from one driver to the next. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-01-07USB: ftdi_sio: added CS5 quirk for broken smartcard readersColin Leitner
Genuine FTDI chips support only CS7/8. A previous fix in commit 8704211f65a2 ("USB: ftdi_sio: fixed handling of unsupported CSIZE setting") enforced this limitation and reported it back to userspace. However, certain types of smartcard readers depend on specific driver behaviour that requests 0 data bits (not 5) to change into a different operating mode if CS5 has been set. This patch reenables this behaviour for all FTDI devices. Tagged to be added to stable, because it affects a lot of users of embedded systems which rely on these readers to work properly. Cc: stable <stable@vger.kernel.org> Reported-by: Heinrich Siebmanns <H.Siebmanns@t-online.de> Tested-by: Heinrich Siebmanns <H.Siebmanns@t-online.de> Signed-off-by: Colin Leitner <colin.leitner@gmail.com> Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-01-07treewide: fix comments and printk msgsMasanari Iida
This patch fixed several typo in printk from various part of kernel source. Signed-off-by: Masanari Iida <standby24x7@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-01-03USB: oti6858: switch to generic TIOCMIWAIT implementationJohan Hovold
Switch to the generic TIOCMIWAIT implementation. Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-01-03USB: oti6858: only wake up MSR queue on changesJohan Hovold
Only wake up MSR wait queue on actual modem-status changes. Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-01-03USB: ch341: clean up interrupt handlerJohan Hovold
Clean up interrupt completion handler somewhat. Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-01-03USB: ch341: switch to generic TIOCMIWAIT implementationJohan Hovold
Switch to the generic TIOCMIWAIT implementation which does not suffer from the races involved when using the deprecated sleep_on functions. Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-01-03USB: ch341: only wake up MSR queue on changesJohan Hovold
Only wake up MSR wait queue on actual modem-status changes. Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-01-03USB: ch341: fix ignored TIOCMIWAIT maskJohan Hovold
Make sure the TIOCMIWAIT mask is always honoured. The CH341 interrupt status has a multiple-status changed flag which indicates that multiple status changes has occurred since last interrupt event. Unfortunately, if the final status is the same, there appears to be no way to determine which signal(s) has changed (an even number of times). This means that the multiple-status flag should not be used in TIOCMIWAIT as it leads to the signal mask argument being ignored (e.g. TIOCMIWAIT could return if DSR changes twice, even though the user only cares about carrier changes). Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-01-03USB: ch341: clean up line-status handlingJohan Hovold
Clean up line-status handling. Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-01-03USB: ch341: refactor line-status handlingJohan Hovold
Refactor line-status handling. Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-01-03USB: cypress_m8: switch to generic TIOCMIWAIT implementationJohan Hovold
Switch to the generic TIOCMIWAIT implementation which does not suffer from the races involved when using the deprecated sleep_on functions. Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-01-03USB: cypress_m8: only wake up MSR queue on changesJohan Hovold
Only wake up MSR wait queue on actual modem-status changes. Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-01-03USB: cypress_m8: clean up protocol definitionsJohan Hovold
Clean up protocol definitions. Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-01-03USB: cypress_m8: fix ring-indicator detection and reportingJohan Hovold
Fix ring-indicator (RI) status-bit definition, which was defined as CTS, effectively preventing RI-changes from being detected while reporting false RI status. This bug predates git. Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-01-03USB: pl2303: switch to generic TIOCMIWAIT implementationJohan Hovold
Switch to the generic TIOCMIWAIT implementation which does not suffer from the races involved when using the deprecated sleep_on functions. Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-01-03USB: pl2303: only wake up MSR queue on changesJohan Hovold
Only wake up MSR wait queue on actual modem-status changes. Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-01-03USB: pl2303: clean up line-status handlingJohan Hovold
Clean up line-status handling somewhat. Get tty-reference only when actually needed. Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-01-03USB: pl2303: make type data constJohan Hovold
Declare constant device-type data as const. Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-01-03USB: serial: add support for iBall 3.5G connect usb modemRahul Bedarkar
Add support for iBall 3.5G connect usb modem. $lsusb Bus 002 Device 006: ID 1c9e:9605 OMEGA TECHNOLOGY $usb-devices T: Bus=02 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 6 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=1c9e ProdID=9605 Rev=00.00 S: Manufacturer=USB Modem S: Product=USB Modem S: SerialNumber=1234567890ABCDEF C: #Ifs= 5 Cfg#= 1 Atr=e0 MxPwr=500mA I: If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option I: If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option I: If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option I: If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=option I: If#= 4 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage Signed-off-by: Rahul Bedarkar <rahulbedarkar89@gmail.com> Suggested-by: Bjørn Mork <bjorn@mork.no> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-01-03USB: serial: correct spelling mistakes in commentsRahul Bedarkar
Signed-off-by: Rahul Bedarkar <rahulbedarkar89@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-01-03USB: pl2303: use C_CMSPAR macroJohan Hovold
Use the new C_CMSPAR macro for consistency. Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-01-03USB: serial: add Moxa UPORT 12XX/14XX/16XX driverAndrew Lunn
Add a driver which supports the following Moxa USB to serial converters: * 2 ports : UPort 1250, UPort 1250I * 4 ports : UPort 1410, UPort 1450, UPort 1450I * 8 ports : UPort 1610-8, UPort 1650-8 * 16 ports : UPort 1610-16, UPort 1650-16 The UPORT devices don't directly fit the USB serial model. USB serial assumes a bulk in/out endpoint pair per serial port. Thus a dual port USB serial device is expected to have two bulk in/out pairs. The Moxa UPORT only has one pair for data transfer and places a header on each transfer over the endpoint indicating for which port the transfer relates to. There is a second endpoint pair for events, such as modem control lines changing state, setting baud rates etc. Again, a multiplexing header is used on these endpoints. Some ports need to have a kfifo explicitly allocated since the framework does not allocate one if there is no associated endpoints. The framework will however free it on unload of the module. All data transfers are made on port0, yet the locks are taken on PortN. urb->context points to PortN, even though the URB is for port0. Where possible, code from the generic driver is called. However mxuport_process_read_urb_data() is mostly a cut/paste of usb_serial_generic_process_read_urb(). The driver will attempt to load firmware from userspace and compare the available version and the running version. If the available version is newer, it will be download into RAM of the device and started. This is optional and the driver appears to work O.K. with older firmware in the devices ROM. This driver is based on the MOXA driver and retains MOXAs copyright. [jhovold@gmail.com: fix get_fw_version error path and some style issues] Signed-off-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-05-12 10:46:28 +0000