aboutsummaryrefslogtreecommitdiff
path: root/drivers/usb
AgeCommit message (Collapse)Author
2011-12-21Merge branch 'for-greg' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-linus * 'for-greg' of git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb: usb: gadget: epautoconf: do not change number of streams usb: dwc3: core: fix cached revision on our structure usb: musb: fix reset issue with full speed device
2011-12-21USB: Fix usb/isp1760 build on sparcDavid Miller
This commit: commit 8f5d621543cb064d2989fc223d3c2bc61a43981e Author: Joachim Foerster <joachim.foerster@missinglinkelectronics.com> Date: Mon Oct 10 18:06:54 2011 +0200 usb/isp1760: Let OF bindings depend on general CONFIG_OF instead of PPC_OF . To be able to use the driver on other OF-aware architectures, too. And add necessary OF related #includes to fix compilation error. Signed-off-by: Joachim Foerster <joachim.foerster@missinglinkelectronics.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> enabled the build on all CONFIG_OF architectures, but it cannot do this. This driver depends upon CONFIG_OF_IRQ but not all CONFIG_OF platforms support that infrastructure, in particular Sparc does not so the build fails. Please push a patch like the following to Linus so that this code only gets built where it actually should. -------------------- usb/isp1760: Add missing CONFIG_OF_IRQ dependency on OF code. Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-12-19usb: gadget: epautoconf: do not change number of streamsFelipe Balbi
We should not change gadget driver's descriptors just because we think it's right to do so. There are several of reasons which would support this statement but it suffices to say that this was probably never tested because it updates bmAttributes without asking the driver if it's ok to do so. This means that e.g. on UASP gadget it would enable stream support even for the command endpoint which must not have stream support enabled. In fact, this change is fixing the bug introduced by commit a59d6b9 (usb: gadget: add streams support to the gadget framework) which was caught when testing UASP gadget with dwc3 driver. Cc: Tatyana Brokhman <tlinder@codeaurora.org> Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-12-14usb: dwc3: core: fix cached revision on our structureFelipe Balbi
All our revision macros are defined with the entire 32-bits which we read from GSNPSID register, so we must cache all 32-bits properly rather than masking the top 16-bits. This will fix all revision checks we have on current driver. Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-12-14usb: musb: fix reset issue with full speed deviceAjay Kumar Gupta
TXMAXP register is not getting programmed correctly for a full speed device as can_bulk_split() have been removed by "0662481: usb: musb: disable double buffering when it's broken" patch. Adding back the case for can_bulk_split() to fix the reset message seen with a full speed stick. Signed-off-by: Ajay Kumar Gupta <ajay.gupta@ti.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-12-13USB: option: Removing one bogus and adding some new Huawei combinationsBjørn Mork
Huawei use the product code HUAWEI_PRODUCT_E353 (0x1506) for a number of different devices, which each can appear with a number of different descriptor sets. Different types of interfaces can be identified by looking at the subclass and protocol fields Subclass 1 protocol 8 is actually the data interface of a CDC ECM set, with subclass 1 protocol 9 as the control interface. Neither support serial data communcation, and cannot therefore be supported by this driver. At the same time, add a few other sets which appear if the device is configured in "Windows mode" using this modeswitch message: 55534243000000000000000000000011060000000100000000000000000000 Signed-off-by: Bjørn Mork <bjorn@mork.no> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-12-12USB: cdc-acm: add IDs for Motorola H24 HSPA USB module.Krzysztof Hałasa
Add USB IDs for Motorola H24 HSPA USB module. Signed-off-by: Krzysztof Hałasa <khalasa@piap.pl> Acked-by: Oliver Neukum <oneukum@suse.de> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-12-12usb: option: Add Huawei E398 controlling interfacesAlex Hermann
This patch adds the controlling interfaces for the Huawei E398. Thanks to Bjørn Mork <bjorn@mork.no> for extracting the interface numbers from the windows driver. Signed-off-by: Alex Hermann <alex@wenlex.nl> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-12-12usb: renesas_usbhs: add hcd->has_tt for low/full speedKuninori Morimoto
Low/Full speed device is not recognized without this patch Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-12-12usb: renesas_usbhs: typofix: irq_dtch control DTCHEKuninori Morimoto
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-12-12usb: gadget: storage: release superspeed descriptors.Yu Xu
Release superspeed mass storage descriptors memory when the function is unbind. Signed-off-by: Yu Xu <yuxu@marvell.com> Acked-by: Michal Nazarewicz <mina86@mina86.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-12-01Merge branch 'for-usb-linus' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/sarah/xhci into usb-linus * 'for-usb-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sarah/xhci: Revert "xHCI: reset-on-resume quirk for NEC uPD720200" xHCI: fix bug in xhci_clear_command_ring()
2011-12-01usb: ftdi_sio: add PID for Propox ISPcable IIIMarcin Kościelnicki
Signed-off-by: Marcin Kościelnicki <koriakin@0x04.net> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-12-01Revert "xHCI: reset-on-resume quirk for NEC uPD720200"Sarah Sharp
This reverts commit df711fc9962b9491af2b92bd0d21ecbfefe4e5fa. The commit added a reset-on-resume quirk because the NEC chipset stopped responding to commands about 30 minutes after a system resume from suspend. We thought it was a chipset issue, but it turns out that the xHCI driver was zeroing out the link TRB after a successful context restore during resume. The host controller would fall off the command ring sometime later, causing it to not respond to new commands. The link TRB issue has been fixed with commit 158886cd2cf4599e04f9b7e10cb767f5f39b14f1 "xHCI: fix bug in xhci_clear_command_ring()", so revert the reset-on-resume quirk, as it's not necessary. Commit df711fc9962b9491af2b92bd0d21ecbfefe4e5fa was marked for stable trees back to 2.6.37, but according to my mail, it has not made it into Linus' tree or the stable trees yet. Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Tested-by: Julian Sikorski <belegdol@gmail.com> Cc: Andiry Xu <andiry.xu@amd.com>
2011-12-01xHCI: fix bug in xhci_clear_command_ring()Andiry Xu
When system enters suspend, xHCI driver clears command ring by writing zero to all the TRBs. However, this also writes zero to the Link TRB, and the ring is mangled. This may cause driver accesses wrong memory address and the result is unpredicted. When clear the command ring, keep the last Link TRB intact, only clear its cycle bit. This should fix the "command ring full" issue reported by Oliver Neukum. This should be backported to stable kernels as old as 2.6.37, since the commit 89821320 "xhci: Fix command ring replay after resume" is merged. Signed-off-by: Andiry Xu <andiry.xu@amd.com> Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Reported-by: Oliver Neukum <oneukum@suse.de>
2011-11-29usb: gadget: fsl_udc: fix dequeuing a request in progressLi Yang
The original implementation of dequeuing a request in progress is not correct. Change to use a correct process and also clean up the related functions a little bit. Signed-off-by: Li Yang <leoli@freescale.com> Acked-by: Peter Chen <peter.chen@freescale.com> Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-11-29usb: fsl_mxc_udc.c: Remove compile-time dependency of MX35 SoC typeFabio Estevam
In order to support multiple SoC kernel image, compile-time dependency on a specific SoC type should be avoided. fsl_udc_clk_finalize is already protected by cpu_is_mx35(), so remove the compile-time check for CONFIG_SOC_IMX35. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-11-29usb: fsl_mxc_udc.c: Fix build issue by including missing header fileFabio Estevam
Fix the following build error: CC [M] drivers/usb/gadget/fsl_mxc_udc.o drivers/usb/gadget/fsl_mxc_udc.c: In function 'fsl_udc_clk_finalize': drivers/usb/gadget/fsl_mxc_udc.c:98: error: implicit declaration of function 'readl' drivers/usb/gadget/fsl_mxc_udc.c:100: error: implicit declaration of function 'writel' This error is caused by the follwing commit: (16fcb63: arm/imx: remove mx31_setup_weimcs( ) from mx31.h) ,which removed '#include <linux/io.h>' from mx31.h. fsl_mxc_udc.c includes <mach/hardware.h>, which in turns includes mx31.h, so that's the reason fsl_mxc_udc.c built fine previously. Instead of relying on the indirect inclusion of the linux/io.h header file, include it directly in fsl_mxc_udc.c. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-11-29USB: fsl_udc_core: use usb_endpoint_xfer_isoc to judge ISO XFERPeter Chen
Some ISO gadgets, like audio, has SYNC attribute as well as USB_ENDPOINT_XFER_ISOC for their bmAttributes at ISO endpoint descriptor. So, it needs to use usb_endpoint_xfer_isoc to judge ISO XFER. Signed-off-by: Peter Chen <peter.chen@freescale.com> Acked-by: Michal Nazarewicz <mina86@mina86.com> Acked-by: Li Yang <leoli@freescale.com> Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-11-29usb: udc: Fix gadget driver's speed check in various UDC driversMichal Nazarewicz
Several UDC drivers had a gadget driver's speed sanity check of the form of: driver->speed != USB_SPEED_HIGH or: driver->speed != USB_SPEED_HIGH && driver->speed != USB_SPEED_FULL As more and more gadget drivers support USB SuperSpeed, driver->speed may be set to USB_SPEED_SUPER and UDC driver should handle such gadget correctly. The above checks however fail to recognise USB_SPEED_SUPER as a valid speed. This commit changes the two checks to: driver->speed < USB_SPEED_HIGH or: driver->speed < USB_SPEED_FULL respectively. Signed-off-by: Michal Nazarewicz <mina86@mina86.com> Reported-by: Alan Stern <stern@rowland.harvard.edu> Tested-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-11-29usb: gadget: fix g_serial regressionRobert Jarzmik
Commit "usb: gadget: use config_ep_by_speed() instead of ep_choose()" broke g_serial in "non ACM nor OBEX" mode. Apply a trivial fix on usb endpoints discovery. Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-11-29usb: renesas_usbhs: fixup driver speedKuninori Morimoto
This patch cares latest USB_SPEED_SUPER support. renesas_usbhs can not use super-speed, but can use full/high speed. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-11-29usb: renesas_usbhs: fixup gadget.dev.driver when udc_stop.Kuninori Morimoto
current renesas_usbhs is using new style udc_start/stop from af1d7056a5c1e5eaaf807ddd1423101db84668d0 (usb: gadget: renesas: convert to new style). But current renesas_usbhs driver didn't care about gadget.dev.driver when udc_stop. it cause rmmod oops. This patch care it. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-11-29usb: renesas_usbhs: fixup signal the driver that cable was disconnectedKuninori Morimoto
current renesas_usbhs is using new style udc_start/stop from af1d7056a5c1e5eaaf807ddd1423101db84668d0 (usb: gadget: renesas: convert to new style). cable disconnected signal was needed. This patch fixup it. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-11-29usb: renesas_usbhs: fixup device_register timingKuninori Morimoto
current renesas_usbhs is using new style udc_start/stop from af1d7056a5c1e5eaaf807ddd1423101db84668d0 (usb: gadget: renesas: convert to new style). But bind() function will fail if it was called before device_register() (or device_add()). This patch modifies this issue. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-11-29usb: musb: PM: fix context save/restore in suspend/resume pathKevin Hilman
Currently the driver tries to save context in the suspend path, but will cause an abort if the device is already runtime suspended. This happens, for example, if MUSB loaded/compiled-in, in host mode, but no USB devices are attached. MUSB will be runtime suspended, but then attempting a system suspend will crash due to the context save being attempted while the device is disabled. On OMAP, as of v3.1, the driver's ->runtime_suspend() callback will be called late in the suspend path (by the PM domain layer) if the driver is not already runtime suspended, ensuring a full shutdown. Therefore, the context save is not needed in the ->suspend() method since it will be called in the ->runtime_suspend() method anyways (similarily for resume.) NOTE: this leaves the suspend/resume methods basically empty (with some FIXMEs and comments, but I'll leave it to the maintainers to decide whether to remove them. Cc: stable@vger.kernel.org Signed-off-by: Kevin Hilman <khilman@ti.com> Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-11-29EHCI : Fix a regression in the ISO schedulerMatthieu CASTET
Fix a regression that was introduced by commit 811c926c538f7e8d3c08b630dd5844efd7e000f6 (USB: EHCI: fix HUB TT scheduling issue with iso transfer). We detect an error if next == start, but this means uframe 0 can't be allocated anymore for iso transfer... Reported-by: Sander Eikelenboom <linux@eikelenboom.it> Signed-off-by: Matthieu CASTET <castet.matthieu@free.fr> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-11-28xHCI: reset-on-resume quirk for NEC uPD720200Andiry Xu
Julian Sikorski reports NEC uPD720200 does not work stable after suspend and resume. Re-initialize the host in xhci_resume(). This should be backported to stable kernels as old as 2.6.37. The kernel will need to include commit c877b3b2ad5cb9d4fe523c5496185cc328ff3ae9 "xhci: Add reset on resume quirk for asrock p67 host" for this patch to work. Signed-off-by: Andiry Xu <andiry.xu@amd.com> Reported-by: Julian Sikorski <belegdol@gmail.com> Tested-by: Julian Sikorski <belegdol@gmail.com> Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
2011-11-26USB: whci-hcd: fix endian conversion in qset_clear()Dan Carpenter
qset->qh.link is an __le64 field and we should be using cpu_to_le64() to fill it. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-11-26USB: usb-storage: unusual_devs entry for Kingston DT 101 G2Qinglin Ye
Kingston DT 101 G2 replies a wrong tag while transporting, add an unusal_devs entry to ignore the tag validation. Signed-off-by: Qinglin Ye <yestyle@gmail.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-11-26usb: option: add SIMCom SIM5218Veli-Pekka Peltola
Tested with SIM5218EVB-KIT evaluation kit. Signed-off-by: Veli-Pekka Peltola <veli-pekka.peltola@bluegiga.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-11-26usb: option: add Huawei E353 controlling interfacesDirk Nehring
This patch creates the missing controlling devices for the Huawei E353 HSPA+ stick. Signed-off-by: Dirk Nehring <dnehring@gmx.net> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-11-21Merge branch 'usb-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb * 'usb-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (48 commits) USB: Fix Corruption issue in USB ftdi driver ftdi_sio.c USB: option: add PID of Huawei E173s 3G modem OHCI: final fix for NVIDIA problems (I hope) USB: option: release new PID for ZTE 3G modem usb: Netlogic: Fix HC_LENGTH call in ehci-xls.c USB: storage: ene_ub6250: fix compile warnings USB: option: add id for 3G dongle Model VT1000 of Viettel USB: serial: pl2303: rm duplicate id USB: pch_udc: Change company name OKI SEMICONDUCTOR to LAPIS Semiconductor USB: pch_udc: Support new device LAPIS Semiconductor ML7831 IOH usb-storage: Accept 8020i-protocol commands longer than 12 bytes USB: quirks: adding more quirky webcams to avoid squeaky audio powerpc/usb: fix type cast for address of ioremap to compatible with 64-bit USB: at91: at91-ohci: fix set/get power USB: cdc-acm: Fix disconnect() vs close() race USB: add quirk for Logitech C600 web cam USB: EHCI: fix HUB TT scheduling issue with iso transfer USB: XHCI: resume root hubs when the controller resumes USB: workaround for bug in old version of GCC USB: ark3116 initialisation fix ...
2011-11-20Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (86 commits) ipv4: fix redirect handling ping: dont increment ICMP_MIB_INERRORS sky2: fix hang in napi_disable sky2: enforce minimum ring size bonding: Don't allow mode change via sysfs with slaves present f_phonet: fix page offset of first received fragment stmmac: fix pm functions avoiding sleep on spinlock stmmac: remove spin_lock in stmmac_ioctl. stmmac: parameters auto-tuning through HW cap reg stmmac: fix advertising 1000Base capabilties for non GMII iface stmmac: use mdelay on timeout of sw reset sky2: version 1.30 sky2: used fixed RSS key sky2: reduce default Tx ring size sky2: rename up/down functions sky2: pci posting issues sky2: fix hang on shutdown (and other irq issues) r6040: fix check against MCRO_HASHEN bit in r6040_multicast_list MAINTAINERS: change email address for shemminger pch_gbe: Move #include of module.h ...
2011-11-18USB: Fix Corruption issue in USB ftdi driver ftdi_sio.cAndrew Worsley
Fix for ftdi_set_termios() glitching output ftdi_set_termios() is constantly setting the baud rate, data bits and parity unnecessarily on every call, . When called while characters are being transmitted can cause the FTDI chip to corrupt the serial port bit stream output by stalling the output half a bit during the output of a character. Simple fix by skipping this setting if the baud rate/data bits/parity are unchanged. Signed-off-by: Andrew Worsley <amworsley@gmail.com> Cc: stable <stable@vger.kernel.org> ---- I had a brief run with strace on the getty and it was doing ioctl()s on each call but it didn't look relavant to the problem. I think the issue is that XON/XOFF flow control was being implmented via hardware - for the ixoff to allow the user to use XON/XOFF to control output. Unfortunately it would send 3 Control URBs updating all of the settings after each piece of input I am trying to work around the issue of gmail messing with the tab/spacing by submitting via SMTP via gmail which I believe should fix the issue. The patch is against v3.2-rc2 and compiles - but no additional testing in this kernel has been done. Thanks Andrew Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-11-18USB: option: add PID of Huawei E173s 3G modemFerenc Wagner
Signed-off-by: Ferenc Wagner <wferi@niif.hu> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-11-18OHCI: final fix for NVIDIA problems (I hope)Alan Stern
Problems with NVIDIA's OHCI host controllers persist. After looking carefully through the spec, I finally realized that when a controller is reset it then automatically goes into a SUSPEND state in which it is completely quiescent (no DMA and no IRQs) and from which it will not awaken until the system puts it into the OPERATIONAL state. Therefore there's no need to worry about controllers being in the RESET state for extended periods, or remaining in the OPERATIONAL state during system shutdown. The proper action for device initialization is to put the controller into the RESET state (if it's not there already) and then to issue a software reset. Similarly, the proper action for device shutdown is simply to do a software reset. This patch (as1499) implements such an approach. It simplifies initialization and shutdown, and allows the NVIDIA shutdown-quirk code to be removed. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Tested-by: Andre "Osku" Schmidt <andre.osku.schmidt@googlemail.com> Tested-by: Arno Augustin <Arno.Augustin@web.de> Cc: stable <stable@vger.kernel.org> [after tested in 3.2 for a while] Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-11-18USB: option: release new PID for ZTE 3G modemzheng.zhijian@zte.com.cn
This patch adds new PIDs for ZTE 3G modem, after we confirm it and tested. Thanks for Dan's work at kernel option devier. Signed-off-by: Alvin.Zheng <zheng.zhijian@zte.com.cn> Signed-off-by: wsalvin <wsalvin@yahoo.com.cn> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-11-18usb: Netlogic: Fix HC_LENGTH call in ehci-xls.cJayachandran C
Fix compile error, HC_LENGTH now takes two parameters and ehci needs to be passed as the first parameter. Signed-off-by: Jayachandran C <jayachandranc@netlogicmicro.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-11-17f_phonet: fix page offset of first received fragmentRémi Denis-Courmont
We pull one byte (the MAC header) from the first fragment before the fragment is actually appended. So the socket buffer length is 1, not 0. Signed-off-by: Rémi Denis-Courmont <remi.denis-courmont@nokia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-16powerpc/fsl_udc_core: Fix dumb typoAl Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-11-15USB: storage: ene_ub6250: fix compile warningsFelipe Balbi
Fix the following compile warning: | drivers/usb/storage/ene_ub6250.c: In function ‘ms_scsi_write’: | drivers/usb/storage/ene_ub6250.c:1728:6: warning: ‘result’ may \ | be used uninitialized in this function [-Wuninitialized] | drivers/usb/storage/ene_ub6250.c:1795:77: warning: ‘offset’ may \ | be used uninitialized in this function [-Wuninitialized] Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-11-15USB: option: add id for 3G dongle Model VT1000 of ViettelVU Tuan Duc
Add VendorID/ProductID for USB 3G dongle Model VT1000 of Viettel. Signed-off-by: VU Tuan Duc <ducvt@viettel.com.vn> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-11-15USB: serial: pl2303: rm duplicate idwangyanqing
I get report from customer that his usb-serial converter doesn't work well,it sometimes work, but sometimes it doesn't. The usb-serial converter's id: vendor_id product_id 0x4348 0x5523 Then I search the usb-serial codes, and there are two drivers announce support this device, pl2303 and ch341, commit 026dfaf1 cause it. Through many times to test, ch341 works well with this device, and pl2303 doesn't work quite often(it just work quite little). ch341 works well with this device, so we doesn't need pl2303 to support.I try to revert 026dfaf1 first, but it failed. So I prepare this patch by hand to revert it. Signed-off-by: Wang YanQing <Udknight@gmail.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-11-15USB: pch_udc: Change company name OKI SEMICONDUCTOR to LAPIS SemiconductorTomoya MORINAGA
On October 1 in 2011, OKI SEMICONDUCTOR Co., Ltd. changed the company name in to LAPIS Semiconductor Co., Ltd. Signed-off-by: Tomoya MORINAGA <tomoya-linux@dsn.lapis-semi.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-11-15USB: pch_udc: Support new device LAPIS Semiconductor ML7831 IOHTomoya MORINAGA
ML7831 is companion chip for Intel Atom E6xx series. Signed-off-by: Tomoya MORINAGA <tomoya-linux@dsn.lapis-semi.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-11-14usb-storage: Accept 8020i-protocol commands longer than 12 bytesAlan Stern
The 8020i protocol (also 8070i and QIC-157) uses 12-byte commands; shorter commands must be padded. Simon Detheridge reports that his 3-TB USB disk drive claims to use the 8020i protocol (which is normally meant for ATAPI devices like CD drives), and because of its large size, the disk drive requires the use of 16-byte commands. However the usb_stor_pad12_command() routine in usb-storage always sets the command length to 12, making the drive impossible to use. Since the SFF-8020i specification allows for 16-byte commands in future extensions, we may as well accept them. This patch (as1490) changes usb_stor_pad12_command() to leave commands larger than 12 bytes alone rather than truncating them. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Tested-by: Simon Detheridge <simon@widgit.com> CC: Matthew Dharm <mdharm-usb@one-eyed-alien.net> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-11-14USB: quirks: adding more quirky webcams to avoid squeaky audiosordna
The following patch contains additional affected webcam models, on top of the patches commited to linux-next 2394d67e446bf616a0885167d5f0d397bdacfdfc and 5b253d88cc6c65a23cefc457a5a4ef139913c5fc Signed-off-by: sordna <sordna@gmail.com> Cc: Oliver Neukum <oliver@neukum.org> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-11-14powerpc/usb: fix type cast for address of ioremap to compatible with 64-bitShaohui Xie
Below are codes for accessing usb sysif_regs in driver: usb_sys_regs = (struct usb_sys_interface *) ((u32)dr_regs + USB_DR_SYS_OFFSET); these codes work in 32-bit, but in 64-bit, use u32 to type cast the address of ioremap is not right, and accessing members of 'usb_sys_regs' will cause call trace, so use (void *) for both 32-bit and 64-bit. Signed-off-by: Shaohui Xie <Shaohui.Xie@freescale.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-11-14USB: at91: at91-ohci: fix set/get powerJean-Christophe PLAGNIOL-VILLARD
in commit aa6e52a35 we introduce the support of overcurrent notification but the set and get of the power without checking if the gpio is valid or not Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
generated by cgit v1.2.3 (git 2.25.1) at 2024-05-17 07:14:29 +0000