aboutsummaryrefslogtreecommitdiff
path: root/drivers/usb
AgeCommit message (Collapse)Author
2011-01-20kconfig: rename CONFIG_EMBEDDED to CONFIG_EXPERTDavid Rientjes
The meaning of CONFIG_EMBEDDED has long since been obsoleted; the option is used to configure any non-standard kernel with a much larger scope than only small devices. This patch renames the option to CONFIG_EXPERT in init/Kconfig and fixes references to the option throughout the kernel. A new CONFIG_EMBEDDED option is added that automatically selects CONFIG_EXPERT when enabled and can be used in the future to isolate options that should only be considered for embedded systems (RISC architectures, SLOB, etc). Calling the option "EXPERT" more accurately represents its intention: only expert users who understand the impact of the configuration changes they are making should enable it. Reviewed-by: Ingo Molnar <mingo@elte.hu> Acked-by: David Woodhouse <david.woodhouse@intel.com> Signed-off-by: David Rientjes <rientjes@google.com> Cc: Greg KH <gregkh@suse.de> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jens Axboe <axboe@kernel.dk> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Robin Holt <holt@sgi.com> Cc: <linux-arch@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-01-13Merge branch 'for-2.6.38/core' of git://git.kernel.dk/linux-2.6-blockLinus Torvalds
* 'for-2.6.38/core' of git://git.kernel.dk/linux-2.6-block: (43 commits) block: ensure that completion error gets properly traced blktrace: add missing probe argument to block_bio_complete block cfq: don't use atomic_t for cfq_group block cfq: don't use atomic_t for cfq_queue block: trace event block fix unassigned field block: add internal hd part table references block: fix accounting bug on cross partition merges kref: add kref_test_and_get bio-integrity: mark kintegrityd_wq highpri and CPU intensive block: make kblockd_workqueue smarter Revert "sd: implement sd_check_events()" block: Clean up exit_io_context() source code. Fix compile warnings due to missing removal of a 'ret' variable fs/block: type signature of major_to_index(int) to major_to_index(unsigned) block: convert !IS_ERR(p) && p to !IS_ERR_NOR_NULL(p) cfq-iosched: don't check cfqg in choose_service_tree() fs/splice: Pull buf->ops->confirm() from splice_from_pipe actors cdrom: export cdrom_check_events() sd: implement sd_check_events() sr: implement sr_check_events() ...
2011-01-13Merge branch 'for-next' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial * 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (43 commits) Documentation/trace/events.txt: Remove obsolete sched_signal_send. writeback: fix global_dirty_limits comment runtime -> real-time ppc: fix comment typo singal -> signal drivers: fix comment typo diable -> disable. m68k: fix comment typo diable -> disable. wireless: comment typo fix diable -> disable. media: comment typo fix diable -> disable. remove doc for obsolete dynamic-printk kernel-parameter remove extraneous 'is' from Documentation/iostats.txt Fix spelling milisec -> ms in snd_ps3 module parameter description Fix spelling mistakes in comments Revert conflicting V4L changes i7core_edac: fix typos in comments mm/rmap.c: fix comment sound, ca0106: Fix assignment to 'channel'. hrtimer: fix a typo in comment init/Kconfig: fix typo anon_inodes: fix wrong function name in comment fix comment typos concerning "consistent" poll: fix a typo in comment ... Fix up trivial conflicts in: - drivers/net/wireless/iwlwifi/iwl-core.c (moved to iwl-legacy.c) - fs/ext4/ext4.h Also fix missed 'diabled' typo in drivers/net/bnx2x/bnx2x.h while at it.
2011-01-10Merge branch 'staging-next' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging-2.6 * 'staging-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging-2.6: (510 commits) staging: speakup: fix failure handling staging: usbip: remove double giveback of URB Staging: batman-adv: Remove batman-adv from staging Staging: hv: Use only one txf buffer per channel and kmalloc/GFP_KERNEL on initialize staging: hv: remove unneeded osd_schedule_callback staging: hv: convert channel_mgmt.c to not call osd_schedule_callback staging: hv: convert vmbus_on_msg_dpc to not call osd_schedule_callback staging: brcm80211: Fix WL_<type> logging macros Staging: IIO: DDS: AD9833 / AD9834 driver Staging: IIO: dds.h convenience macros Staging: IIO: Direct digital synthesis abi documentation staging: brcm80211: Convert ETHER_TYPE_802_1X to ETH_P_PAE staging: brcm80211: Remove unused ETHER_TYPE_<foo> #defines staging: brcm80211: Remove ETHER_HDR_LEN, use ETH_HLEN staging: brcm80211: Convert ETHER_ADDR_LEN to ETH_ALEN staging: brcm80211: Convert ETHER_IS<FOO> to is_<foo>_ether_addr staging: brcm80211: Remove unused ether_<foo> #defines and struct staging: brcm80211: Convert ETHER_IS_MULTI to is_multicast_ether_addr staging: brcm80211: Remove unused #defines ETHER_<foo>_LOCALADDR Staging: comedi: Fix checkpatch.pl issues in file s526.c ... Fix up trivial conflict in drivers/video/udlfb.c
2011-01-10headers: kobject.h reduxAlexey Dobriyan
Remove kobject.h from files which don't need it, notably, sched.h and fs.h. Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-01-10Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/suspend-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/suspend-2.6: spi / PM: Support dev_pm_ops PM: Prototype the pm_generic_ operations PM / Runtime: Generic resume shouldn't set RPM_ACTIVE unconditionally PM: Use dev_name() in core device suspend and resume routines PM: Permit registration of parentless devices during system suspend PM: Replace the device power.status field with a bit field PM: Remove redundant checks from core device resume routines PM: Use a different list of devices for each stage of device suspend PM: Avoid compiler warning in pm_noirq_op() PM: Use pm_wakeup_pending() in __device_suspend() PM / Wakeup: Replace pm_check_wakeup_events() with pm_wakeup_pending() PM: Prevent dpm_prepare() from returning errors unnecessarily PM: Fix references to basic-pm-debugging.txt in drivers-testing.txt PM / Runtime: Add synchronous runtime interface for interrupt handlers (v3) PM / Hibernate: When failed, in_suspend should be reset PM / Hibernate: hibernation_ops->leave should be checked too Freezer: Fix a race during freezing of TASK_STOPPED tasks PM: Use proper ccflag flag in kernel/power/Makefile PM / Runtime: Fix comments to match runtime callback code
2011-01-07Merge branch 'for-2.6.38' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wqLinus Torvalds
* 'for-2.6.38' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq: (33 commits) usb: don't use flush_scheduled_work() speedtch: don't abuse struct delayed_work media/video: don't use flush_scheduled_work() media/video: explicitly flush request_module work ioc4: use static work_struct for ioc4_load_modules() init: don't call flush_scheduled_work() from do_initcalls() s390: don't use flush_scheduled_work() rtc: don't use flush_scheduled_work() mmc: update workqueue usages mfd: update workqueue usages dvb: don't use flush_scheduled_work() leds-wm8350: don't use flush_scheduled_work() mISDN: don't use flush_scheduled_work() macintosh/ams: don't use flush_scheduled_work() vmwgfx: don't use flush_scheduled_work() tpm: don't use flush_scheduled_work() sonypi: don't use flush_scheduled_work() hvsi: don't use flush_scheduled_work() xen: don't use flush_scheduled_work() gdrom: don't use flush_scheduled_work() ... Fixed up trivial conflict in drivers/media/video/bt8xx/bttv-input.c as per Tejun.
2011-01-07Merge branch 'usb-next' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6 * 'usb-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6: (144 commits) USB: add support for Dream Cheeky DL100B Webmail Notifier (1d34:0004) USB: serial: ftdi_sio: add support for TIOCSERGETLSR USB: ehci-mxc: Setup portsc register prior to accessing OTG viewport USB: atmel_usba_udc: fix freeing irq in usba_udc_remove() usb: ehci-omap: fix tll channel enable mask usb: ohci-omap3: fix trivial typo USB: gadget: ci13xxx: don't assume that PAGE_SIZE is 4096 USB: gadget: ci13xxx: fix complete() callback for no_interrupt rq's USB: gadget: update ci13xxx to work with g_ether USB: gadgets: ci13xxx: fix probing of compiled-in gadget drivers Revert "USB: musb: pm: don't rely fully on clock support" Revert "USB: musb: blackfin: pm: make it work" USB: uas: Use GFP_NOIO instead of GFP_KERNEL in I/O submission path USB: uas: Ensure we only bind to a UAS interface USB: uas: Rename sense pipe and sense urb to status pipe and status urb USB: uas: Use kzalloc instead of kmalloc USB: uas: Fix up the Sense IU usb: musb: core: kill unneeded #include's DA8xx: assign name to MUSB IRQ resource usb: gadget: g_ncm added ... Manually fix up trivial conflicts in USB Kconfig changes in: arch/arm/mach-omap2/Kconfig arch/sh/Kconfig drivers/usb/Kconfig drivers/usb/host/ehci-hcd.c and annoying chip clock data conflicts in: arch/arm/mach-omap2/clock3xxx_data.c arch/arm/mach-omap2/clock44xx_data.c
2011-01-07Merge branch 'vfs-scale-working' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/npiggin/linux-npiggin * 'vfs-scale-working' of git://git.kernel.org/pub/scm/linux/kernel/git/npiggin/linux-npiggin: (57 commits) fs: scale mntget/mntput fs: rename vfsmount counter helpers fs: implement faster dentry memcmp fs: prefetch inode data in dcache lookup fs: improve scalability of pseudo filesystems fs: dcache per-inode inode alias locking fs: dcache per-bucket dcache hash locking bit_spinlock: add required includes kernel: add bl_list xfs: provide simple rcu-walk ACL implementation btrfs: provide simple rcu-walk ACL implementation ext2,3,4: provide simple rcu-walk ACL implementation fs: provide simple rcu-walk generic_check_acl implementation fs: provide rcu-walk aware permission i_ops fs: rcu-walk aware d_revalidate method fs: cache optimise dentry and inode for rcu-walk fs: dcache reduce branches in lookup path fs: dcache remove d_mounted fs: fs_struct use seqlock fs: rcu-walk for path lookup ...
2011-01-07fs: dcache remove dcache_lockNick Piggin
dcache_lock no longer protects anything. remove it. Signed-off-by: Nick Piggin <npiggin@kernel.dk>
2011-01-07fs: dcache scale subdirsNick Piggin
Protect d_subdirs and d_child with d_lock, except in filesystems that aren't using dcache_lock for these anyway (eg. using i_mutex). Note: if we change the locking rule in future so that ->d_child protection is provided only with ->d_parent->d_lock, it may allow us to reduce some locking. But it would be an exception to an otherwise regular locking scheme, so we'd have to see some good results. Probably not worthwhile. Signed-off-by: Nick Piggin <npiggin@kernel.dk>
2011-01-07fs: dcache scale d_unhashedNick Piggin
Protect d_unhashed(dentry) condition with d_lock. This means keeping DCACHE_UNHASHED bit in synch with hash manipulations. Signed-off-by: Nick Piggin <npiggin@kernel.dk>
2011-01-06Merge branch 'devel-stable' into develRussell King
Conflicts: arch/arm/mach-pxa/clock.c arch/arm/mach-pxa/clock.h
2011-01-05Merge branch 'for-rmk' of git://git.pengutronix.de/git/imx/linux-2.6 into ↵Russell King
devel-stable
2011-01-03drivers: fix comment typo diable -> disable.Justin P. Mattock
The below patch fixes a typo "diable" to "disable" and also fixes another typo in a comment. Please let me know if this is correct or not. Signed-off-by: Justin P. Mattock <justinmattock@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-01-03Merge branch 'master' of git://git.infradead.org/users/cbou/linux-cns3xxx ↵Russell King
into devel-stable
2011-01-03mx51: fix usb clock supportArnaud Patard (Rtp)
Current code doesn't really enable the usb clocks so if they're disabled when booting linux, the kernel/machine will hang as soon as someone is trying to read a usb register Signed-off-by: Arnaud Patard <arnaud.patard@rtp-net.org> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-01-03Merge branch 'sgu/mxs-core-v8' of git://git.pengutronix.de/git/ukl/linux-2.6 ↵Sascha Hauer
into imx-for-2.6.38-new
2010-12-28ueagle-atm: fix PHY signal initialization raceDan Williams
A race exists when initializing ueagle-atm devices where the generic atm device may not yet be created before the driver attempts to initialize it's PHY signal state, which checks whether the atm device has been created or not. This often causes the sysfs 'carrier' attribute to be '1' even though no signal has actually been found. uea_probe usbatm_usb_probe driver->bind (uea_bind) uea_boot kthread_run(uea_kthread) uea_kthread usbatm_atm_init uea_start_reset atm_dev_register UPDATE_ATM_SIGNAL UPDATE_ATM_SIGNAL checks whether the ATM device has been created and if not, will not update the PHY signal state. Because of the race that does not always happen in time, and the PHY signal state remains ATM_PHY_SIG_FOUND even though no signal exists. To fix the race, just create the kthread during initialization, and only after initialization is complete, start the thread that reboots the device and initializes PHY state. [ 3030.490931] uea_probe: calling usbatm_usb_probe [ 3030.490946] ueagle-atm 8-2:1.0: usbatm_usb_probe: trying driver ueagle-atm with vendor=1110, product=9031, ifnum 0 [ 3030.493691] uea_bind: setting usbatm [ 3030.496932] usb 8-2: [ueagle-atm] using iso mode [ 3030.497283] ueagle-atm 8-2:1.0: usbatm_usb_probe: using 3021 byte buffer for rx channel 0xffff880125953508 <kthread already started before usbatm_usb_probe() has returned> [ 3030.497292] usb 8-2: [ueagle-atm] (re)booting started <UPDATE_ATM_SIGNAL checks whether ATM device has been created yet before setting PHY state> [ 3030.497298] uea_start_reset: atm dev (null) <and since it hasn't been created yet PHY state is not set> [ 3030.497306] ueagle-atm 8-2:1.0: usbatm_usb_probe: using 3392 byte buffer for tx channel 0xffff8801259535b8 [ 3030.497374] usbatm_usb_probe: about to init [ 3030.497379] usbatm_usb_probe: calling usbatm_atm_init <atm device finally gets created> [ 3030.497384] usbatm_atm_init: creating atm device! Signed-off-by: Dan Williams <dcbw@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-12-24usb: don't use flush_scheduled_work()Tejun Heo
flush_scheduled_work() is being deprecated. Directly flush or cancel work items instead. * u_ether, isp1301_omap, speedtch conversions are straight-forward. * ochi-hcd should only flush when quirk_nec() is true as otherwise the work wouldn't have been initialized. * In oti6858, cancel_delayed_work() + flush_scheduled_work() -> cancel_delayed_work_sync(). Signed-off-by: Tejun Heo <tj@kernel.org> Acked-by: Greg Kroah-Hartman <gregkh@suse.de> Cc: David Brownell <dbrownell@users.sourceforge.net> Cc: Duncan Sands <duncan.sands@free.fr> Cc: linux-usb@vger.kernel.org
2010-12-24speedtch: don't abuse struct delayed_workTejun Heo
speedtch directly uses the internal timer and work members of a struct delayed_work. Use a separate work item and timer instead. * Nicolas Kaiser discovered that timer init was missing. Fixed. Signed-off-by: Tejun Heo <tj@kernel.org> Acked-by: Greg Kroah-Hartman <gregkh@suse.de> Tested-by: Nicolas Kaiser <nikai@nikai.net> Cc: Duncan Sands <duncan.sands@free.fr> Cc: linux-usb@vger.kernel.org
2010-12-24PM: Replace the device power.status field with a bit fieldRafael J. Wysocki
The device power.status field is too complicated for its purpose (storing the information about whether or not the device is in the "active" state from the PM core's point of view), so replace it with a bit field and modify all of its users accordingly. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2010-12-22USB: Merge 2.6.37-rc5 into usb-nextGreg Kroah-Hartman
This is to resolve the conflict in the file, drivers/usb/gadget/composite.c that was due to a revert in Linus's tree needed for the 2.6.37 release. Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-12-22Merge branch 'master' into for-nextJiri Kosina
Conflicts: MAINTAINERS arch/arm/mach-omap2/pm24xx.c drivers/scsi/bfa/bfa_fcpim.c Needed to update to apply fixes for which the old branch was too outdated.
2010-12-21USB: add support for Dream Cheeky DL100B Webmail Notifier (1d34:0004)Melchior FRANZ
So far the USBLED driver only supports Delcom's "USB Visual Signal Indicator" (http://www.delcomproducts.com/products_USBLMP.asp). The driver generates virtual files "red", "green", and "blue" under the device's /sys/ directory, where color values can be read from and written to. This patch adds support for Dream Cheeky's "DL100B Webmail Notifier" (http://www.dreamcheeky.com/webmail-notifier -- available from several shops, such as http://www.conrad.at/ce/de/product/777048/USB-WEBMAIL). This device isn't as pretty as Delcom's, but it's *far* cheaper, and its 3 LEDs can be set in 32 brightness steps each. The grey envelope contour can easily be removed, leaving a rather neutral white box (with a few small holes), which is useful for generic signalling purposes. Of course, the small circuit board can easily be put into a prettier case. The DL100B device pretends to be a HID, but the HID descriptor shows that it's not overly useful as such (see below). The patch therefore removes the "HID-ness" (hid-core.c, hid-ids.h), and adds the necessary commands to usbled.c. The protocol info comes from the developer's manual that Dream Cheeky kindly provided (815DeveloperManual.pdf). HID descriptor: 0: 05 01 Usage Page 'Generic Desktop Controls' 2: 09 10 Usage 'Reserved' 4: a1 01 Collection 'Application (mouse, keyboard)' 6: 05 00 Usage Page 'Undefined' 8: 19 10 Usage Minimum = 16 10: 29 11 Usage Maximum = 17 12: 15 00 Logical Minimum = 0 14: 25 0f Logical Maximum = 15 16: 75 08 Report Size = 8 18: 95 08 Report Count = 8 20: 91 02 Output data *var abs lin pref-state null-pos non-vol bit-field 22: 19 10 Usage Minimum = 16 24: 29 11 Usage Maximum = 17 26: 15 00 Logical Minimum = 0 28: 25 0f Logical Maximum = 15 30: 75 08 Report Size = 8 32: 95 08 Report Count = 8 34: 81 00 Input data array abs lin pref-state null-pos non-vol bit-field 36: c0 End Collection Signed-off-by: Melchior FRANZ <mfranz@aon.at> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-12-20Merge branch 'usb-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6 * 'usb-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6: Revert "USB: gadget: Allow function access to device ID data during bind()" USB: misc: uss720.c: add another vendor/product ID USB: usb-storage: unusual_devs entry for the Samsung YP-CP3 USB: gadget: Remove suspended sysfs file before freeing cdev USB: core: Add input prompt and help text for USB_OTG config USB: ftdi_sio: Add D.O.Tec PID xhci: Fix issue with port array setup and buggy hosts.
2010-12-16Revert "USB: gadget: Allow function access to device ID data during bind()"Greg Kroah-Hartman
This reverts commit 1ab83238740ff1e1773d5c13ecac43c60cf4aec4. Turns out this doesn't allow for the device ids to be overridden properly, so we need to revert the thing. Reported-by: Jef Driesen <jefdriesen@telenet.be> Cc: Robert Lukassen <Robert.Lukassen@tomtom.com> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-12-16USB: misc: uss720.c: add another vendor/product IDThomas Sailer
Fabio Battaglia report that he has another cable that works with this driver, so this patch adds its vendor/product ID. Signed-off-by: Thomas Sailer <t.sailer@alumni.ethz.ch> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-12-16USB: usb-storage: unusual_devs entry for the Samsung YP-CP3Vitaly Kuznetsov
Add an unusual_devs entry for the Samsung YP-CP3 MP4 player. User was getting the following errors in dmesg: usb 2-6: reset high speed USB device using ehci_hcd and address 2 usb 2-6: reset high speed USB device using ehci_hcd and address 2 usb 2-6: reset high speed USB device using ehci_hcd and address 2 usb 2-6: USB disconnect, address 2 sd 3:0:0:0: [sdb] Assuming drive cache: write through sdb:<2>ldm_validate_partition_table(): Disk read failed. Dev sdb: unable to read RDB block 0 unable to read partition table Signed-off-by: Vitaly Kuznetsov <vitty@altlinux.ru> Acked-by: Alan Stern <stern@rowland.harvard.edu> CC: Matthew Dharm <mdharm-usb@one-eyed-alien.net> CC: stable@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-12-16USB: gadget: Remove suspended sysfs file before freeing cdevPavankumar Kondeti
cdev struct is accessed in suspended sysfs show function. So remove sysfs file before freeing the cdev in composite_unbind. Signed-off-by: Pavankumar Kondeti <pkondeti@codeaurora.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-12-16USB: core: Add input prompt and help text for USB_OTG configPavankumar Kondeti
bd6882 commit (usb: gadget: fix Kconfig warning) removes the duplicate USB_OTG config from gadget/Kconfig. But does not copy the input prompt and help text to the original config defined in core/Kconfig. Add them now. Signed-off-by: Pavankumar Kondeti <pkondeti@codeaurora.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-12-16USB: serial: ftdi_sio: add support for TIOCSERGETLSRGreg Kroah-Hartman
Willem-Jan noticed that the ftdi_sio driver did not support the TIOCSERGETLSR ioctl, and some userspace programs rely on it. This patch adds the support. Reported-by: Willem-Jan de Hoog <wdehoog@exalondelft.nl> Tested-by: Willem-Jan de Hoog <wdehoog@exalondelft.nl> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-12-16USB: ehci-mxc: Setup portsc register prior to accessing OTG viewportFabio Estevam
In order to read/write to the i.MX OTG viewport register it is necessary to setup the PORTSCx register first. By default i.MX OTG port is configured for USB serial PHY. In order to use a ULPI PHY the PORTSCx register needs to be configured properly. commit 724c852 (USB: ehci/mxc: compile fix) placed the PORTSC setup after the OTG viewport is accessed and this causes ULPI read/write to fail. Revert the PORTSC setup order. Tested on a MX31PDK board with a ISP1504 transceiver: ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver mxc-ehci mxc-ehci.0: initializing i.MX USB Controller ULPI transceiver vendor/product ID 0x04cc/0x1504 Found NXP ISP1504 ULPI transceiver. ULPI integrity check: passed. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-12-16USB: atmel_usba_udc: fix freeing irq in usba_udc_remove()Rob Emanuele
Add a free_irq() call on vbus gpio when we remove udc so that the vbus irq is properly released. Signed-off-by: Rob Emanuele <rje@crystalfontz.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-12-16usb: ehci-omap: fix tll channel enable maskAnand Gadiyar
The TLL channel enable code searches for the wrong mask, and could end up enabling the wrong port. Fix this. Signed-off-by: Anand Gadiyar <gadiyar@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-12-16usb: ohci-omap3: fix trivial typoKeshava Munegowda
This is the ohci-omap3 driver, not ehci-omap. Correct this obvious typo. Signed-off-by: Keshava Munegowda <keshava_mgowda@ti.com> Signed-off-by: Anand Gadiyar <gadiyar@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-12-16USB: gadget: ci13xxx: don't assume that PAGE_SIZE is 4096Artem Leonenko
Page size for transaction descriptors for CI13XXX has nothing common with page size from MM. Using platform and configuration specific PAGE_SIZE is wrong. Signed-off-by: Artem Leonenko <tikkeri@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-12-16USB: gadget: ci13xxx: fix complete() callback for no_interrupt rq'sArtem Leonenko
CI13xxx UDC driver doesn't call complete() callback for requests with flag no_interrupt set. Thus gadget drivers (like g_ether) are never notifed about successfully (or not) transmitted requests. As a result in case of g_ether and queued request with no_interrupt=1 fields g_ether is never notifed about sent packets and TX stalls. Solution: treat no_interrupt flag like all other UDC drivers do and call complete() callback for all requests. Signed-off-by: Artem Leonenko <tikkeri@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-12-16USB: gadget: update ci13xxx to work with g_etherArtem Leonenko
There is one nasty scenario when CI13xxx driver fails: a) two or more rx requests are queued (g_ether does that) b) rx request completed, interrupt fires and ci13xxx dequeues rq c) request complete() callback gets called and in turn it calls ep_queue() c1) in ep_queue() request gets added to the TAIL of the rx queue list d) ep gets primed with rq from (b) e) interrupt fires f) request gets popped from queue head for hw dequeue G) requets from queue head wasn't enqueued g1) isr_tr_complete_low() doesn't enqueue more requests and it doesn't prime EP, rx traffic stalls Solution: a) enque queued requests ASAP, i.e. before calling complete() callback. b) don't HW enqueue and prime endpoint with recently added request and use the oldest request in the queue. Fixed issues: a) ep_queue() may return an error code despite request was successfully added to the queue (if _hardware_enqueue() fails) b) Added requests are always processed in LIFO order, even if they are added in complete() callback c) Finally more than two and more queued requests are processed consistently, even if they were added in complete() callback The fix was successfully tested on MIPS based SoC with 4KEc CPU core and CI13612 USB core. Board successfully boots with NFS root using g_ether on ci13xxx udc. Signed-off-by: Artem Leonenko <tikkeri@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-12-16USB: gadgets: ci13xxx: fix probing of compiled-in gadget driversArtem Leonenko
Built-in gadget drivers have NULL-ifed unbind() function. Checking whether unbind() is NULL will never let any compiled into kernel driver attach. Signed-off-by: Artem Leonenko <tikkeri@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-12-16Merge branch 'usb-next' into musb-mergeGreg Kroah-Hartman
* usb-next: (132 commits) USB: uas: Use GFP_NOIO instead of GFP_KERNEL in I/O submission path USB: uas: Ensure we only bind to a UAS interface USB: uas: Rename sense pipe and sense urb to status pipe and status urb USB: uas: Use kzalloc instead of kmalloc USB: uas: Fix up the Sense IU usb: musb: core: kill unneeded #include's DA8xx: assign name to MUSB IRQ resource usb: gadget: g_ncm added usb: gadget: f_ncm.c added usb: gadget: u_ether: prepare for NCM usb: pch_udc: Fix setup transfers with data out usb: pch_udc: Fix compile error, warnings and checkpatch warnings usb: add ab8500 usb transceiver driver USB: gadget: Implement runtime PM for MSM bus glue driver USB: gadget: Implement runtime PM for ci13xxx gadget USB: gadget: Add USB controller driver for MSM SoC USB: gadget: Introduce ci13xxx_udc_driver struct USB: gadget: Initialize ci13xxx gadget device's coherent DMA mask USB: gadget: Fix "scheduling while atomic" bugs in ci13xxx_udc USB: gadget: Separate out PCI bus code from ci13xxx_udc ...
2010-12-16Revert "USB: musb: pm: don't rely fully on clock support"Greg Kroah-Hartman
This reverts commit 32d5dc9520f0c6f60f691dd478741c774e292406. Needed to properly merge the musb changes that are in the usb-next branch into Linus's tree. Acked-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-12-16Revert "USB: musb: blackfin: pm: make it work"Greg Kroah-Hartman
This reverts commit 1e393c6eece048052d4131ec4dad3b98e35a98e2. Needed to properly merge the musb changes that are in the usb-next branch into Linus's tree. Acked-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-12-15USB: uas: Use GFP_NOIO instead of GFP_KERNEL in I/O submission pathMatthew Wilcox
If swap is on a UAS device, we could recurse into the driver by using GFP_KERNEL. Using GFP_NOIO ensures we won't. Reported-by: James Bottomley <James.Bottomley@suse.de> Signed-off-by: Matthew Wilcox <willy@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-12-15USB: uas: Ensure we only bind to a UAS interfaceMatthew Wilcox
While all existing UAS devices use alternate interface 1, this is not guaranteed, and it has caused confusion with people trying to bind the uas driver to non-uas devices. Signed-off-by: Matthew Wilcox <willy@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-12-15USB: uas: Rename sense pipe and sense urb to status pipe and status urbMatthew Wilcox
The spec calls this the status pipe. While it is used to receive sense IUs, it is also used to receive other IUs, so this can be confusing. Reported-by: Luben Tuikov <ltuikov@yahoo.com> Signed-off-by: Matthew Wilcox <willy@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-12-15USB: uas: Use kzalloc instead of kmallocMatthew Wilcox
The IUs are not being fully initialised by the driver (due to the reserved space). Since we should be zeroing reserved fields, use kzalloc to do it for us. Reported-by: Luben Tuikov <ltuikov@yahoo.com> Signed-off-by: Matthew Wilcox <willy@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-12-15USB: uas: Fix up the Sense IUMatthew Wilcox
Add a comment to the Sense IU data structure that it's also used for Read Ready and Write Ready. Remove the 'service response' element since it's gone from the current draft (04). Signed-off-by: Matthew Wilcox <willy@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-12-15Merge branch 'musb-hw' of git://gitorious.org/usb/usb into musbGreg Kroah-Hartman
* 'musb-hw' of git://gitorious.org/usb/usb: (43 commits) usb: musb: core: kill unneeded #include's DA8xx: assign name to MUSB IRQ resource arm: OMAP4430: musb: Configure musb to OTG mode usb: musb: Adding musb support for OMAP4430 usb: otg: TWL6030: Add twl6030_usb file for compilation mfd: TWL6030: OMAP4: Registering the TWL6030-usb device usb: musb: TWL6030: Selecting TWL6030_USB transceiver usb: otg: Kconfig: Add Kconfig option for TWL6030 transceiver. usb: otg: Adding twl6030-usb transceiver driver for OMAP4430 mfd: TWL6030: USBOTG VBUS event generation on usb: musb: add support for ux500 platform musb: am35x: fix compile error due to control apis arm: omap4: enable usb on 4430sdp usb: musb: drop board_set_vbus usb: musb: drop musb_platform_suspend/resume usb: musb: blackfin: usb dev_pm_ops structure usb: musb: am35x: usb dev_pm_ops structure usb: musb: omap2430: use dev_pm_ops structure usb: musb: omap2430: drop the nops usb: musb: mark musb_save/restore_context static ...
2010-12-15workqueue: convert cancel_rearming_delayed_work[queue]() users to ↵Tejun Heo
cancel_delayed_work_sync() cancel_rearming_delayed_work[queue]() has been superceded by cancel_delayed_work_sync() quite some time ago. Convert all the in-kernel users. The conversions are completely equivalent and trivial. Signed-off-by: Tejun Heo <tj@kernel.org> Acked-by: "David S. Miller" <davem@davemloft.net> Acked-by: Greg Kroah-Hartman <gregkh@suse.de> Acked-by: Evgeniy Polyakov <zbr@ioremap.net> Cc: Jeff Garzik <jgarzik@pobox.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Mauro Carvalho Chehab <mchehab@infradead.org> Cc: netdev@vger.kernel.org Cc: Anton Vorontsov <cbou@mail.ru> Cc: David Woodhouse <dwmw2@infradead.org> Cc: "J. Bruce Fields" <bfields@fieldses.org> Cc: Neil Brown <neilb@suse.de> Cc: Alex Elder <aelder@sgi.com> Cc: xfs-masters@oss.sgi.com Cc: Christoph Lameter <cl@linux-foundation.org> Cc: Pekka Enberg <penberg@cs.helsinki.fi> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: netfilter-devel@vger.kernel.org Cc: Trond Myklebust <Trond.Myklebust@netapp.com> Cc: linux-nfs@vger.kernel.org