aboutsummaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2014-02-14Merge tag 'usb-3.14-rc3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB fixes from Greg KH: "Here is a bunch of USB fixes for 3.14-rc3. Most of these are xhci reverts, fixing a bunch of reported issues with USB 3 host controller issues that loads of people have been hitting (with the exception of kernel developers, all of our machines seem to be working fine, which is why these took so long to get resolved...) There are some other minor fixes and new device ids, as ususal. All have been in linux-next successfully" * tag 'usb-3.14-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (22 commits) usb: option: blacklist ZTE MF667 net interface Revert "usb: xhci: Link TRB must not occur within a USB payload burst" Revert "xhci: Avoid infinite loop when sg urb requires too many trbs" Revert "xhci: Set scatter-gather limit to avoid failed block writes." xhci 1.0: Limit arbitrarily-aligned scatter gather. Modpost: fixed USB alias generation for ranges including 0x9 and 0xA usb: core: Fix potential memory leak adding dyn USBdevice IDs USB: ftdi_sio: add Tagsys RFID Reader IDs usb: qcserial: add Netgear Aircard 340U usb-storage: enable multi-LUN scanning when needed USB: simple: add Dynastream ANT USB-m Stick device support usb-storage: add unusual-devs entry for BlackBerry 9000 usb-storage: restrict bcdDevice range for Super Top in Cypress ATACB usb: phy: move some error messages to debug usb: ftdi_sio: add Mindstorms EV3 console adapter usb: dwc2: fix memory corruption in dwc2 driver usb: dwc2: fix role switch breakage usb: dwc2: bail out early when booting with "nousb" Revert "xhci: replace xhci_read_64() with readq()" Revert "xhci: replace xhci_write_64() with writeq()" ...
2014-02-14Merge tag 'tty-3.14-rc3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull tty/serial driver fixes from Greg KH: "Here are a small number of tty/serial driver fixes to resolve reported issues with 3.14-rc and earlier (in the case of the vt bugfix). Some of these have been tested and reported by a number of people as the tty bugfix was pretty commonly hit on some platforms. All have been in linux-next for a while" * tag 'tty-3.14-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: vt: Fix secure clear screen serial: 8250: Support XR17V35x fraction divisor n_tty: Fix stale echo output serial: sirf: fix kernel panic caused by unpaired spinlock serial: 8250_pci: unbreak last serial ports on NetMos 9865 cards n_tty: Fix poll() when TIME_CHAR and MIN_CHAR == 0 serial: omap: fix rs485 probe on defered pinctrl serial: 8250_dw: fix compilation warning when !CONFIG_PM_SLEEP serial: omap-serial: Move info message to probe function tty: Set correct tty name in 'active' sysfs attribute tty: n_gsm: Fix for modems with brk in modem status control drivers/tty/hvc: don't use module_init in non-modular hyp. console code
2014-02-14Merge tag 'staging-3.14-rc3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging Pull staging driver fixes from Greg KH: "Here are a number (lots, I know) of fixes for staging drivers to resolve a bunch of reported issues. The largest patches here is one revert of a patch that is in 3.14-rc1 to fix reported problems, and a sync of a usb host driver that required some ARM patches to go in before it could be accepted (which is why it missed -rc1) All of these have been in linux-next for a while with no reported issues" * tag 'staging-3.14-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (56 commits) staging/rtl8821ae: fix build, depends on MAC80211 iio: max1363: Use devm_regulator_get_optional for optional regulator iio:accel:bma180: Use modifier instead of index in channel specification iio: adis16400: Set timestamp as the last element in chan_spec iio: ak8975: Fix calculation formula for convert micro tesla to gauss unit staging:iio:ad799x fix typo in ad799x_events[] iio: mxs-lradc: remove useless scale_available files iio: mxs-lradc: fix buffer overflow iio:magnetometer:mag3110: Fix output of decimal digits in show_int_plus_micros() iio:magnetometer:mag3110: Report busy in _read_raw() / write_raw() when buffer is enabled wlags49_h2: Fix overflow in wireless_set_essid() xlr_net: Fix missing trivial allocation check staging: r8188eu: overflow in rtw_p2p_get_go_device_address() staging: r8188eu: array overflow in rtw_mp_ioctl_hdl() staging: r8188eu: Fix typo in USB_DEVICE list usbip/userspace/libsrc/names.c: memory leak gpu: ion: dereferencing an ERR_PTR staging: comedi: usbduxsigma: fix unaligned dereferences staging: comedi: fix too early cleanup in comedi_auto_config() staging: android: ion: dummy: fix an error code ...
2014-02-14Merge tag 'driver-core-3.14-rc3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core fix from Greg KH: "Here is a single driver core patch for 3.14-rc3 for the component code that Russell has found and fixed" * tag 'driver-core-3.14-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: drivers/base: fix devres handling for master device
2014-02-14Merge tag 'char-misc-3.14-rc3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc fixes from Greg KH: "Here are some small char/misc driver fixes, along with some documentation updates, for 3.14-rc3. Nothing major, just a number of fixes for reported issues" * tag 'char-misc-3.14-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: Revert "misc: eeprom: sunxi: Add new compatibles" Revert "ARM: sunxi: dt: Convert to the new SID compatibles" misc: mic: fix possible signed underflow (undefined behavior) in userspace API ARM: sunxi: dt: Convert to the new SID compatibles misc: eeprom: sunxi: Add new compatibles misc: genwqe: Fix potential memory leak when pinning memory Documentation:Update Documentation/zh_CN/arm64/memory.txt Documentation:Update Documentation/zh_CN/arm64/booting.txt Documentation:Chinese translation of Documentation/arm64/tagged-pointers.txt raw: set range for MAX_RAW_DEVS raw: test against runtime value of max_raw_minors Drivers: hv: vmbus: Don't timeout during the initial connection with host Drivers: hv: vmbus: Specify the target CPU that should receive notification VME: Correct read/write alignment algorithm mei: don't unset read cb ptr on reset mei: clear write cb from waiting list on reset
2014-02-14Merge tag 'md/3.14-fixes' of git://neil.brown.name/mdLinus Torvalds
Pull md fixes from Neil Brown: "Two bugfixes for md both tagged for -stable" * tag 'md/3.14-fixes' of git://neil.brown.name/md: md/raid5: Fix CPU hotplug callback registration md/raid1: restore ability for check and repair to fix read errors.
2014-02-14Revert "misc: eeprom: sunxi: Add new compatibles"Greg Kroah-Hartman
This reverts commit f0de8e04a7201a2000f3c6d09732c11e7f35d42d, it is incorrect, a future patch will fix this up properly. Cc: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-02-14Merge tag 'pm+acpi-3.14-rc3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull ACPI and power management fixes from Rafael Wysocki: "These include a fix for a recent intel_pstate regression, a fix for a regression in the ACPI-based PCI hotplug (ACPIPHP) code introduced during the 3.12 cycle, fixes for two bugs in the ACPI core introduced recently and a MAINTAINERS update related to cpufreq. Specifics: - Fix for a recent regression in the intel_pstate driver that introduced a race condition causing systems to crash during initialization in some situations. This removes the affected code altogether. From Dirk Brandewie. - ACPIPHP fix for a regression introduced during the 3.12 cycle causing devices to be dropped as a result of bus check notifications after system resume on some systems due to the way ACPIPHP interprets _STA return values (arguably incorrectly). From Mika Westerberg. - ACPI dock driver fix for a problem causing docking to fail due to a check that always fails after recent ACPI core changes (found by code inspection). - ACPI container driver fix to prevent memory from being leaked in an error code path after device_register() failures. - Update of the arm_big_little cpufreq driver maintainer's e-mail address" * tag 'pm+acpi-3.14-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: MAINTAINERS / cpufreq: update Sudeep's email address intel_pstate: Remove energy reporting from pstate_sample tracepoint ACPI / container: Fix error code path in container_device_attach() ACPI / hotplug / PCI: Relax the checking of _STA return values ACPI / dock: Use acpi_device_enumerated() to check if dock is present
2014-02-14Merge tag 'edac_for_3.14' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bpLinus Torvalds
Pull EDAC fixes from Borislav Petkov: "Fix polling timeout setting through sysfs. You're surely wondering why the patches are not based on an rc. Well, Andrew sent you 79040cad3f82 ("drivers/edac/edac_mc_sysfs.c: poll timeout cannot be zero sent you") already (it got in in -rc2) but it is not enough as a fix because for one, setting too low polling intervals (< 1sec) don't make any sense and cause unnecessary polling load on the system. Then, even if we set some interval, we explode with [ 4143.094342] WARNING: CPU: 1 PID: 0 at kernel/workqueue.c:1393 __queue_work+0x1d7/0x340() because the workqueue setup path is used also for the timeout period resetting and we're doing INIT_DELAYED_WORK() on an already active workqueue. Which is total bollocks. So this is taken care of by the second patch. I've CCed stable for those two" * tag 'edac_for_3.14' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp: EDAC: Correct workqueue setup path EDAC: Poll timeout cannot be zero, p2
2014-02-14Merge tag 'fbdev-fixes-3.14' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tomba/linux Pull fbdev fixes from Tomi Valkeinen: "Minor fbdev fixes for 3.14" * tag 'fbdev-fixes-3.14' of git://git.kernel.org/pub/scm/linux/kernel/git/tomba/linux: video: Kconfig: Allow more broad selection of the imxfb framebuffer driver. video: exynos: Fix S6E8AX0 LCD driver build error OMAPDSS: fix fck field types OMAPDSS: DISPC: decimation rounding fix
2014-02-14Merge branch 'for-linus' of git://git.kernel.dk/linux-blockLinus Torvalds
Pull block IO fixes from Jens Axboe: "Second round of updates and fixes for 3.14-rc2. Most of this stuff has been queued up for a while. The notable exception is the blk-mq changes, which are naturally a bit more in flux still. The pull request contains: - Two bug fixes for the new immutable vecs, causing crashes with raid or swap. From Kent. - Various blk-mq tweaks and fixes from Christoph. A fix for integrity bio's from Nic. - A few bcache fixes from Kent and Darrick Wong. - xen-blk{front,back} fixes from David Vrabel, Matt Rushton, Nicolas Swenson, and Roger Pau Monne. - Fix for a vec miscount with integrity vectors from Martin. - Minor annotations or fixes from Masanari Iida and Rashika Kheria. - Tweak to null_blk to do more normal FIFO processing of requests from Shlomo Pongratz. - Elevator switching bypass fix from Tejun. - Softlockup in blkdev_issue_discard() fix when !CONFIG_PREEMPT from me" * 'for-linus' of git://git.kernel.dk/linux-block: (31 commits) block: add cond_resched() to potentially long running ioctl discard loop xen-blkback: init persistent_purge_work work_struct blk-mq: pair blk_mq_start_request / blk_mq_requeue_request blk-mq: dont assume rq->errors is set when returning an error from ->queue_rq block: Fix cloning of discard/write same bios block: Fix type mismatch in ssize_t_blk_mq_tag_sysfs_show blk-mq: rework flush sequencing logic null_blk: use blk_complete_request and blk_mq_complete_request virtio_blk: use blk_mq_complete_request blk-mq: rework I/O completions fs: Add prototype declaration to appropriate header file include/linux/bio.h fs: Mark function as static in fs/bio-integrity.c block/null_blk: Fix completion processing from LIFO to FIFO block: Explicitly handle discard/write same segments block: Fix nr_vecs for inline integrity vectors blk-mq: Add bio_integrity setup to blk_mq_make_request blk-mq: initialize sg_reserved_size blk-mq: handle dma_drain_size blk-mq: divert __blk_put_request for MQ ops blk-mq: support at_head inserations for blk_execute_rq ...
2014-02-14Merge tag 'rdma-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband Pull RDMA/InfiniBand fixes from Roland Dreier: - Fix some rough edges from the "IP addressing for IBoE" merge - Other misc fixes, mostly to hardware drivers * tag 'rdma-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband: (21 commits) RDMA/ocrdma: Fix load time panic during GID table init RDMA/ocrdma: Fix traffic class shift IB/iser: Fix use after free in iser_snd_completion() IB/iser: Avoid dereferencing iscsi_iser conn object when not bound to iser connection IB/usnic: Fix smatch endianness error IB/mlx5: Remove dependency on X86 mlx5: Add include of <linux/slab.h> because of kzalloc()/kfree() use IB/qib: Add missing serdes init sequence RDMA/cxgb4: Add missing neigh_release in LE-Workaround path IB: Report using RoCE IP based gids in port caps IB/mlx4: Build the port IBoE GID table properly under bonding IB/mlx4: Do IBoE GID table resets per-port IB/mlx4: Do IBoE locking earlier when initializing the GID table IB/mlx4: Move rtnl locking to the right place IB/mlx4: Make sure GID index 0 is always occupied IB/mlx4: Don't allocate range of steerable UD QPs for Ethernet-only device RDMA/amso1100: Fix error return code RDMA/nes: Fix error return code IB/mlx5: Don't set "block multicast loopback" capability IB/mlx5: Fix binary compatibility with libmlx5 ...
2014-02-14Merge tag 'hwmon-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging Pull hwmon fix from Guenter Roeck: "Fix arithmetic overflow in ntc_thermistor driver" * tag 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: hwmon: (ntc_thermistor) Avoid math overflow
2014-02-14Merge tag 'for-v3.14-fixes' of git://git.infradead.org/battery-2.6Linus Torvalds
Pull battery fixes from Dmitry Eremin-Solenikov: - Fix NULL pointer dereference in max17040 driver - Add bq2415x dts bindings documentation - Fix misleading comment in ds2782 driver - Remove useless check in isp1704 charger driver. * tag 'for-v3.14-fixes' of git://git.infradead.org/battery-2.6: power: max17040: Fix NULL pointer dereference when there is no platform_data dt: binding documentation for bq2415x charger isp1704_charger: remove useless check in isp1704_charger_probe() power: ds2782_battery: Typo in comment
2014-02-14Merge branches 'cma', 'cxgb4', 'iser', 'misc', 'mlx4', 'mlx5', 'nes', ↵Roland Dreier
'ocrdma', 'qib' and 'usnic' into for-next
2014-02-14RDMA/ocrdma: Fix load time panic during GID table initDevesh Sharma
We should use rdma_vlan_dev_real_dev() instead of using vlan_dev_real_dev() when building the GID table for a vlan interface. Signed-off-by: Devesh Sharma <devesh.sharma@emulex.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-02-14RDMA/ocrdma: Fix traffic class shiftDevesh Sharma
Use correct value for obtaining traffic class from device response for Query QP request. Signed-off-by: Devesh Sharma <devesh.sharma@emulex.com> Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-02-14IB/iser: Fix use after free in iser_snd_completion()Dan Carpenter
We use "tx_desc" again after we free it. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-02-14IB/iser: Avoid dereferencing iscsi_iser conn object when not bound to iser ↵Roi Dayan
connection Fix a possible NULL pointer dereference in disconnection flow. This can happen if the target disconnected/rejected the connection request, e.g before the binding stage between iscsi connection to the transport connection. Signed-off-by: Alex Tabachnik <alext@mellanox.com> Signed-off-by: Roi Dayan <roid@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-02-14IB/usnic: Fix smatch endianness errorUpinder Malhi
Error reported at http://marc.info/?l=linux-rdma&m=138995755801039&w=2 Fix short to int cast for big endian systems. Signed-off-by: Upinder Malhi <umalhi@cisco.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-02-14EDAC: Correct workqueue setup pathBorislav Petkov
We're using edac_mc_workq_setup() both on the init path, when we load an edac driver and when we change the polling period (edac_mc_reset_delay_period) through /sys/.../edac_mc_poll_msec. On that second path we don't need to init the workqueue which has been initialized already. Thanks to Tejun for workqueue insights. Signed-off-by: Borislav Petkov <bp@suse.de> Link: http://lkml.kernel.org/r/1391457913-881-1-git-send-email-prarit@redhat.com Cc: <stable@vger.kernel.org>
2014-02-14EDAC: Poll timeout cannot be zero, p2Borislav Petkov
Sanitize code even more to accept unsigned longs only and to not allow polling intervals below 1 second as this is unnecessary and doesn't make much sense anyway for polling errors. Signed-off-by: Borislav Petkov <bp@suse.de> Link: http://lkml.kernel.org/r/1391457913-881-1-git-send-email-prarit@redhat.com Cc: Doug Thompson <dougthompson@xmission.com> Cc: <stable@vger.kernel.org>
2014-02-14video: Kconfig: Allow more broad selection of the imxfb framebuffer driver.Denis Carikli
Without that patch, a user can't select the imxfb driver when the i.MX25 and/or the i.MX27 device tree board are selected and that no boards that selects IMX_HAVE_PLATFORM_IMX_FB are compiled in. Cc: Eric Bénard <eric@eukrea.com> Cc: Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com> Cc: Sascha Hauer <kernel@pengutronix.de> Cc: Tomi Valkeinen <tomi.valkeinen@ti.com> Cc: linux-arm-kernel@lists.infradead.org Cc: linux-fbdev@vger.kernel.org Signed-off-by: Denis Carikli <denis@eukrea.com> Acked-by: Shawn Guo <shawn.guo@linaro.org> Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2014-02-14video: exynos: Fix S6E8AX0 LCD driver build errorSachin Kamat
Enable S6E8AX0 LCD driver only if LCD_CLASS_DEVICE is a built-in driver. Else we get the following errors due to missing symbols: drivers/built-in.o: In function `s6e8ax0_probe': :(.text+0x51aec): undefined reference to `lcd_device_register' :(.text+0x51c44): undefined reference to `lcd_device_unregister' Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2014-02-13IB/mlx5: Remove dependency on X86Eli Cohen
Remove Kconfig dependency of mlx5_ib/mlx5_core on X86, since there is no such dependency in reality. Signed-off-by: Eli Cohen <eli@mellanox.com> Signed-off-by: Michael Neuling <mikey@neuling.org> Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-02-13hwmon: (ntc_thermistor) Avoid math overflowDoug Anderson
The ntc thermistor code was doing math whose temporary result might have overflowed 32-bits. We need some casts in there to make it safe. In one example I found: - pullup_uV: 1800000 - result of iio_read_channel_raw: 3226 - 1800000 * 3226 => 0x15a1cbc80 Signed-off-by: Doug Anderson <dianders@chromium.org> Cc: stable@vger.kernel.org # 3.10+ Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2014-02-13IB/qib: Add missing serdes init sequenceMike Marciniszyn
Research has shown that commit a77fcf895046 ("IB/qib: Use a single txselect module parameter for serdes tuning") missed a key serdes init sequence. This patch add that sequence. Cc: <stable@vger.kernel.org> Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-02-13RDMA/cxgb4: Add missing neigh_release in LE-Workaround pathKumar Sanghvi
Signed-off-by: Kumar Sanghvi <kumaras@chelsio.com> Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-02-13IB: Report using RoCE IP based gids in port capsMoni Shoua
For userspace RoCE UD QPs we need to know the GID format that the kernel uses, e.g when working over older kernels. For that end, add a new port capability IB_PORT_IP_BASED_GIDS and report it when query port is issued. Signed-off-by: Moni Shoua <monis@mellanox.co.il> Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-02-13IB/mlx4: Build the port IBoE GID table properly under bondingMoni Shoua
When scanning netdevices we need to check a few more conditions and cases to build the IBoE GID table properly. For example, under bonding we must make sure that when a port is down, the bond IP address isn't programmed as a GID, since doing so will cause failure with IB core flows that selects ports by GID. Signed-off-by: Moni Shoua <monis@mellanox.co.il> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-02-13IB/mlx4: Do IBoE GID table resets per-portMoni Shoua
The IBoE code used to reset the GID table did it for all Ethernet ports of the device. Since the whole architecture of generating GIDs and responding to events is port-based, this is inefficient and can lead to wrong content in the GID table. Change the reset flow to be per-port. Signed-off-by: Moni Shoua <monis@mellanox.co.il> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-02-13IB/mlx4: Do IBoE locking earlier when initializing the GID tableMoni Shoua
Updating the GID table under IBoE requires read/write from/to shared data structures. These data structures are protected with the device iboe lock. The flows that modify the GID table start from 1. Initializing the GID table 2. NETDEV events 3. INET or INET6 events This patch makes sure that the flow of initializing the GID table is consistent with the other two flows w.r.t on what step the lock is taken. Signed-off-by: Moni Shoua <monis@mellanox.co.il> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-02-13IB/mlx4: Move rtnl locking to the right placeMoni Shoua
On the one hand, the invocation of netdev_master_upper_dev_get() within mlx4_ib_scan_netdevs() must be done with rtnl lock held. On the other hand, it's wrong to call rtnl_lock() from within this function since it's also called by our netdev notifier callback. Therefore move the locking to mlx4_ib_add() so that both cases are covered. Signed-off-by: Moni Shoua <monis@mellanox.co.il> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-02-13IB/mlx4: Make sure GID index 0 is always occupiedMoni Shoua
Make sure that for Ethernet ports, the port GID table index 0 is always occupied with a default GID of the relevant IPv6 link-local adderss. This provides better user experience for legacy applications that don't use the RDMA CM and were working on index 0 prior to the IP addressing change. Also, as GIDs are generated from IP addresses of the network devices that are associated with the port, it's basically possible that the GID table will be empty if no IP address was assigned. This doesn't comply with the IB spec section 4.1.1 "GID usage and properties". Signed-off-by: Moni Shoua <monis@mellanox.co.il> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-02-13vt: Fix secure clear screenPetr Písař
\E[3J console code (secure clear screen) needs to update_screen(vc) in order to write-through blanks into off-screen video memory. This has been removed accidentally in 3.6 by: commit 81732c3b2fede049a692e58a7ceabb6d18ffb18c Author: Jean-François Moine <moinejf@free.fr> Date: Thu Sep 6 19:24:13 2012 +0200 tty vt: Fix line garbage in virtual console on command line edition Signed-off-by: Petr Písař <petr.pisar@atlas.cz> Cc: stable <stable@vger.kernel.org> # 3.6 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-02-13serial: 8250: Support XR17V35x fraction divisorJoe Schultz
The Exar XR17V35x family of UARTs have an additional fractional divisor register (DLD) which was not being used. Calculate and set this register for these devices to reduce their baud rate error. Signed-off-by: Joe Schultz <jschultz@xes-inc.com> Signed-off-by: Aaron Sierra <asierra@xes-inc.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-02-13n_tty: Fix stale echo outputPeter Hurley
When echoes cannot be flushed to output (usually because the tty has no more write room) and L_ECHO is subsequently turned off, then when L_ECHO is turned back on, stale echoes are output. Output completed echoes regardless of the L_ECHO setting: 1. before normal writes to that tty 2. if the tty was stopped by soft flow control and is being restarted Reported-by: Mikulas Patocka <mpatocka@redhat.com> Cc: <stable@vger.kernel.org> # 3.13.x Signed-off-by: Peter Hurley <peter@hurleysoftware.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-02-13serial: sirf: fix kernel panic caused by unpaired spinlockQipan Li
commit 8b9ade9f74f8a279 coming from Viresh Kumar "tty: serial: sirfsoc: drop uart_port->lock before calling tty_flip_buffer_push()" broke sirfsoc uart driver by knic: [ 5.129122] BUG: spinlock already unlocked on CPU#0, ip6tables/1331 [ 5.132554] lock: sirfsoc_uart_ports+0x4/0x8a0, .magic: dead4ead, .owner: <none>/-1, .owner_cpu: -1 [ 5.141651] CPU: 0 PID: 1331 Comm: ip6tables Tainted: G W O 3.10.16 #3 [ 5.148866] [<c0013528>] (unwind_backtrace+0x0/0xe0) from [<c0010e70>] (show_stack+0x10/0x14) [ 5.157362] [<c0010e70>] (show_stack+0x10/0x14) from [<c01a5e68>] (do_raw_spin_unlock+0x40/0xc8) [ 5.166125] [<c01a5e68>] (do_raw_spin_unlock+0x40/0xc8) from [<c03ff8b4>] (_raw_spin_unlock+0x8/0x40) [ 5.175322] [<c03ff8b4>] (_raw_spin_unlock+0x8/0x40) from [<c0203fcc>] (sirfsoc_uart_pio_rx_chars+0xa4/0xc0) [ 5.185120] [<c0203fcc>] (sirfsoc_uart_pio_rx_chars+0xa4/0xc0) from [<c0204fb8>] (sirfsoc_rx_tmo_process_tl+0xdc/0x1e0) [ 5.195875] [<c0204fb8>] (sirfsoc_rx_tmo_process_tl+0xdc/0x1e0) from [<c0024b50>] (tasklet_action+0x8c/0xec) [ 5.205673] [<c0024b50>] (tasklet_action+0x8c/0xec) from [<c00242a8>] (__do_softirq+0xec/0x1d4) [ 5.214347] [<c00242a8>] (__do_softirq+0xec/0x1d4) from [<c0024428>] (do_softirq+0x48/0x54) [ 5.222674] [<c0024428>] (do_softirq+0x48/0x54) from [<c0024690>] (irq_exit+0x74/0xc0) [ 5.230573] [<c0024690>] (irq_exit+0x74/0xc0) from [<c000e1e8>] (handle_IRQ+0x6c/0x90) [ 5.238465] [<c000e1e8>] (handle_IRQ+0x6c/0x90) from [<c000d500>] (__irq_svc+0x40/0x70) [ 5.246446] [<c000d500>] (__irq_svc+0x40/0x70) from [<c0092e7c>] (mark_page_accessed+0xc/0x68) [ 5.255034] [<c0092e7c>] (mark_page_accessed+0xc/0x68) from [<c00a2a4c>] (unmap_single_vma+0x3bc/0x550) [ 5.264402] [<c00a2a4c>] (unmap_single_vma+0x3bc/0x550) from [<c00a3b4c>] (unmap_vmas+0x44/0x54) [ 5.273164] [<c00a3b4c>] (unmap_vmas+0x44/0x54) from [<c00a81a8>] (exit_mmap+0xc4/0x1e0) [ 5.281233] [<c00a81a8>] (exit_mmap+0xc4/0x1e0) from [<c001bb78>] (mmput+0x3c/0xdc) [ 5.288868] [<c001bb78>] (mmput+0x3c/0xdc) from [<c0021b0c>] (do_exit+0x30c/0x828) [ 5.296413] [<c0021b0c>] (do_exit+0x30c/0x828) from [<c0022dac>] (do_group_exit+0x4c/0xb0) [ 5.304653] [<c0022dac>] (do_group_exit+0x4c/0xb0) from [<c0022e20>] (__wake_up_parent+0x0/0x18) Root cause: the commit dropped uart_port->lock before calling tty_flip_buffer_push(), but in sirfsoc-uart, sirfsoc_uart_pio_rx_chars() can be called by sirfsoc_rx_tmo_process_tl(). here uart_port->lock has not been taken yet. so that caused unpaired lock/unlock. Solution: This patch is doing a quick fix for that, it adds spin_lock/unlock(&port->lock) protect to sirfsoc_uart_pio_rx_chars() in sirfsoc_rx_tmo_process_tl() to keep spin_lock/unlock in pair. Signed-off-by: Qipan Li <Qipan.Li@csr.com> Signed-off-by: Barry Song <Baohua.Song@csr.com> Cc: stable <stable@vger.kernel.org> # 3.12 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-02-13serial: 8250_pci: unbreak last serial ports on NetMos 9865 cardsDmitry Eremin-Solenikov
Aparently 9865 uses standard BAR encoding scheme (unlike 99xx cards). Current pci_netmos_9900_setup() uses wrong BAR indices for the 9865 PCI device, function 2. Using standard BAR indices makes all 6 ports work for me. Thus disable the NetMos 9900 quirk for NetMos 9865 pci device. For the reference, here is the relevant part of lspci for my device: 02:07.0 Serial controller: MosChip Semiconductor Technology Ltd. PCI 9865 Multi-I/O Controller (prog-if 02 [16550]) Subsystem: Device a000:1000 Flags: bus master, medium devsel, latency 32, IRQ 17 I/O ports at ac00 [size=8] Memory at fcfff000 (32-bit, non-prefetchable) [size=4K] Memory at fcffe000 (32-bit, non-prefetchable) [size=4K] Capabilities: [48] Power Management version 2 Kernel driver in use: serial 02:07.1 Serial controller: MosChip Semiconductor Technology Ltd. PCI 9865 Multi-I/O Controller (prog-if 02 [16550]) Subsystem: Device a000:1000 Flags: bus master, medium devsel, latency 32, IRQ 18 I/O ports at a800 [size=8] Memory at fcffd000 (32-bit, non-prefetchable) [size=4K] Memory at fcffc000 (32-bit, non-prefetchable) [size=4K] Capabilities: [48] Power Management version 2 Kernel driver in use: serial 02:07.2 Communication controller: MosChip Semiconductor Technology Ltd. PCI 9865 Multi-I/O Controller Subsystem: Device a000:3004 Flags: bus master, medium devsel, latency 32, IRQ 19 I/O ports at a400 [size=8] I/O ports at a000 [size=8] I/O ports at 9c00 [size=8] I/O ports at 9800 [size=8] Memory at fcffb000 (32-bit, non-prefetchable) [size=4K] Capabilities: [48] Power Management version 2 Kernel driver in use: serial Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-02-13n_tty: Fix poll() when TIME_CHAR and MIN_CHAR == 0Peter Hurley
Commit eafbe67f84761d787802e5113d895a316b6292fe, n_tty: Refactor input_available_p() by call site broke poll() when TIME_CHAR(tty) and MIN_CHAR(tty) are both 0. When TIME_CHAR and MIN_CHAR are both 0, input is available if the read_cnt is 1 (not 0). Reported-by: Eric Dumazet <edumazet@google.com> Tested-by: Eric Dumazet <edumazet@google.com> Reported-by: Stephane Eranian <eranian@google.com> Tested-by: David Ahern <dsahern@gmail.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Peter Hurley <peter@hurleysoftware.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-02-13serial: omap: fix rs485 probe on defered pinctrlMichael Grzeschik
If the gpio is not yet available we better also defer the probing in the rs485 case. Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-02-13serial: 8250_dw: fix compilation warning when !CONFIG_PM_SLEEPMika Westerberg
CONFIG_PM will be set if either or both CONFIG_PM_SLEEP and CONFIG_PM_RUNTIME is set. Compiling the driver with !CONFIG_PM_SLEEP causes following compilation warnings: drivers/tty/serial/8250/8250_dw.c:404:12: warning: ‘dw8250_suspend’ defined but not used [-Wunused-function] drivers/tty/serial/8250/8250_dw.c:413:12: warning: ‘dw8250_resume’ defined but not used [-Wunused-function] Fix this by using CONFIG_PM_SLEEP instead. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-02-13serial: omap-serial: Move info message to probe functionMarkus Pargmann
Currently the info message about a missing wakeirq for uart is printed every time the serial driver's startup function is called. This happens multiple times and not just once. This can cause lots of extra messages at boot time, slowing things down. It is caused by commit 2a0b965cfb6e (serial: omap: Add support for optional wake-up) which was applied for v3.13-rc1. This patch moves the infomessage to the probe function to display it only once. Reported-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Markus Pargmann <mpa@pengutronix.de> Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Cc: stable <stable@vger.kernel.org> # 3.13 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-02-13IB/mlx4: Don't allocate range of steerable UD QPs for Ethernet-only deviceMatan Barak
When the device has only Ethernet ports, don't try to allocate range of steerable UD QPs since they aren't needed. This fixes an issue where mlx4 VFs tried to allocate a range of UD steerable QPs, but failed to do so. Fixes: c1c98501121e ("IB/mlx4: Add support for steerable IB UD QPs") Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-02-13md/raid5: Fix CPU hotplug callback registrationOleg Nesterov
Subsystems that want to register CPU hotplug callbacks, as well as perform initialization for the CPUs that are already online, often do it as shown below: get_online_cpus(); for_each_online_cpu(cpu) init_cpu(cpu); register_cpu_notifier(&foobar_cpu_notifier); put_online_cpus(); This is wrong, since it is prone to ABBA deadlocks involving the cpu_add_remove_lock and the cpu_hotplug.lock (when running concurrently with CPU hotplug operations). Interestingly, the raid5 code can actually prevent double initialization and hence can use the following simplified form of callback registration: register_cpu_notifier(&foobar_cpu_notifier); get_online_cpus(); for_each_online_cpu(cpu) init_cpu(cpu); put_online_cpus(); A hotplug operation that occurs between registering the notifier and calling get_online_cpus(), won't disrupt anything, because the code takes care to perform the memory allocations only once. So reorganize the code in raid5 this way to fix the deadlock with callback registration. Cc: linux-raid@vger.kernel.org Cc: stable@vger.kernel.org (v2.6.32+) Fixes: 36d1c6476be51101778882897b315bd928c8c7b5 Signed-off-by: Oleg Nesterov <oleg@redhat.com> [Srivatsa: Fixed the unregister_cpu_notifier() deadlock, added the free_scratch_buffer() helper to condense code further and wrote the changelog.] Signed-off-by: Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com> Signed-off-by: NeilBrown <neilb@suse.de>
2014-02-13Merge branch 'pm-cpufreq'Rafael J. Wysocki
* pm-cpufreq: MAINTAINERS / cpufreq: update Sudeep's email address intel_pstate: Remove energy reporting from pstate_sample tracepoint
2014-02-13intel_pstate: Remove energy reporting from pstate_sample tracepointDirk Brandewie
Remove the reporting of energy since it does not provide any useful information about the state of the driver and will be a maintainance headache going forward since the RAPL energy units register is not architectural and subject to change between micro-architectures References: https://bugzilla.kernel.org/show_bug.cgi?id=69831 Fixes: b69880f9ccf7 (intel_pstate: Add trace point to report internal state.) Signed-off-by: Dirk Brandewie <dirk.j.brandewie@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-02-12Merge tag 'stable/for-linus-3.14-rc2-tag' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip Pull Xen bugfixes from Konrad Rzeszutek Wilk: "This has an healthy amount of code being removed - which we do not use anymore (the only user of it was ia64 Xen which had been removed already). The other bug-fixes are to make Xen ARM be able to use the new event channel mechanism and proper export of header files to user-space. Summary: - Fix ARM and Xen FIFO not working. - Remove more Xen ia64 vestigates. - Fix UAPI missing Xen files" * tag 'stable/for-linus-3.14-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: ia64/xen: Remove Xen support for ia64 even more xen: install xen/gntdev.h and xen/gntalloc.h xen/events: bind all new interdomain events to VCPU0
2014-02-12RDMA/amso1100: Fix error return codeJulia Lawall
Set the return variable to an error code as done elsewhere in the function. A simplified version of the semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> ( if@p1 (\(ret < 0\|ret != 0\)) { ... return ret; } | ret@p1 = 0 ) ... when != ret = e1 when != &ret *if(...) { ... when != ret = e2 when forall return ret; } // </smpl> Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-02-12RDMA/nes: Fix error return codeJulia Lawall
Set the return variable to an error code as done elsewhere in the function. A simplified version of the semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> ( if@p1 (\(ret < 0\|ret != 0\)) { ... return ret; } | ret@p1 = 0 ) ... when != ret = e1 when != &ret *if(...) { ... when != ret = e2 when forall return ret; } // </smpl> Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: Roland Dreier <roland@purestorage.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-06-23 03:54:58 +0000