aboutsummaryrefslogtreecommitdiff
path: root/fs/nfs/pnfs.h
AgeCommit message (Collapse)Author
2012-01-06pnfs-obj: Must return layout on IO errorBoaz Harrosh
As mandated by the standard. In case of an IO error, a pNFS objects layout driver must return it's layout. This is because all device errors are reported to the server as part of the layout return buffer. This is implemented the same way PNFS_LAYOUTRET_ON_SETATTR is done, through a bit flag on the pnfs_layoutdriver_type->flags member. The flag is set by the layout driver that wants a layout_return preformed at pnfs_ld_{write,read}_done in case of an error. (Though I have not defined a wrapper like pnfs_ld_layoutret_on_setattr because this code is never called outside of pnfs.c and pnfs IO paths) Without this patch 3.[0-2] Kernels leak memory and have an annoying WARN_ON after every IO error utilizing the pnfs-obj driver. [This patch is for 3.2 Kernel. 3.1/0 Kernels need a different patch] CC: Stable Tree <stable@kernel.org> Signed-off-by: Boaz Harrosh <bharrosh@panasas.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2011-10-18pnfs: recoalesce when ld read pagelist failsPeng Tao
For pnfs pagelist read failure, we need to pg_recoalesce and resend IO to mds. Signed-off-by: Peng Tao <peng_tao@emc.com> Signed-off-by: Jim Rees <rees@umich.edu> Cc: stable@kernel.org [3.0] Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2011-10-18pnfs: recoalesce when ld write pagelist failsPeng Tao
For pnfs pagelist write failure, we need to pg_recoalesce and resend IO to mds. Signed-off-by: Peng Tao <peng_tao@emc.com> Signed-off-by: Jim Rees <rees@umich.edu> Cc: stable@kernel.org [3.0] Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2011-10-18pnfs: make _set_lo_fail genericPeng Tao
file layout and block layout both use it to set mark layout io failure bit. So make it generic. Signed-off-by: Peng Tao <peng_tao@emc.com> Signed-off-by: Jim Rees <rees@umich.edu> Cc: stable@kernel.org [3.0] Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2011-07-31NFS: Re-enable compilation of nfs with !CONFIG_NFS_V4 || !CONFIG_NFS_V4_1Trond Myklebust
Fix two recently introduced compile problems: Fix a typo in fs/nfs/pnfs.h Move the pnfs_blksize declaration outside the CONFIG_NFS_V4 section in struct nfs_server. Reported-by: Jens Axboe <jaxboe@fusionio.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-07-31pnfsblock: call and parse getdevicelistFred Isaman
Call GETDEVICELIST during mount, then call and parse GETDEVICEINFO for each device returned. [pnfsblock: get rid of deprecated xdr macros] Signed-off-by: Jim Rees <rees@umich.edu> [pnfsblock: fix pnfs_deviceid references] Signed-off-by: Fred Isaman <iisaman@citi.umich.edu> [pnfsblock: fix print format warnings for sector_t and size_t] [pnfs-block: #include <linux/vmalloc.h>] [pnfsblock: no PNFS_NFS_SERVER] Signed-off-by: Benny Halevy <bhalevy@panasas.com> [pnfsblock: fix bug determining size of striped volume] [pnfsblock: fix oops when using multiple devices] Signed-off-by: Fred Isaman <iisaman@citi.umich.edu> Signed-off-by: Benny Halevy <bhalevy@panasas.com> Signed-off-by: Benny Halevy <bhalevy@tonian.com> [pnfsblock: get rid of vmap and deviceid->area structure] Signed-off-by: Peng Tao <peng_tao@emc.com> Signed-off-by: Jim Rees <rees@umich.edu> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2011-07-31pnfs: cleanup_layoutcommitAndy Adamson
This gives layout driver a chance to cleanup structures they put in at encode_layoutcommit. Signed-off-by: Andy Adamson <andros@netapp.com> [fixup layout header pointer for layoutcommit] Signed-off-by: Benny Halevy <bhalevy@panasas.com> Signed-off-by: Benny Halevy <bhalevy@tonian.com> [rm inode and pnfs_layout_hdr args from cleanup_layoutcommit()] Signed-off-by: Jim Rees <rees@umich.edu> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2011-07-31pnfs: add set-clear layoutdriver interfaceBenny Halevy
To allow layout driver to issue getdevicelist at mount time, and clean up at umount time. [fixup non NFS_V4_1 set_pnfs_layoutdriver definition] [pnfs: pass mntfh down the init_pnfs path] Signed-off-by: Benny Halevy <bhalevy@panasas.com> Signed-off-by: Benny Halevy <bhalevy@tonian.com> Signed-off-by: Jim Rees <rees@umich.edu> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2011-07-31pnfs: GETDEVICELISTAndy Adamson
The block driver uses GETDEVICELIST Signed-off-by: Andy Adamson <andros@netapp.com> [pass struct nfs_server * to getdevicelist] [get machince creds for getdevicelist] [fix getdevicelist decode sizing] Signed-off-by: Benny Halevy <bhalevy@panasas.com> Signed-off-by: Benny Halevy <bhalevy@tonian.com> Signed-off-by: Jim Rees <rees@umich.edu> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2011-07-31pnfs: let layoutcommit handle a list of lsegPeng Tao
There can be multiple lseg per file, so layoutcommit should be able to handle it. [Needed in v3.0] CC: Stable Tree <stable@kernel.org> Signed-off-by: Peng Tao <peng_tao@emc.com> Signed-off-by: Boaz Harrosh <bharrosh@panasas.com> Signed-off-by: Jim Rees <rees@umich.edu> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2011-07-31pnfs: save layoutcommit cred at layout header initPeng Tao
No need to save it for every lseg. No need to save it at every pnfs_set_layoutcommit. [Needed in v3.0] CC: Stable Tree <stable@kernel.org> Signed-off-by: Peng Tao <peng_tao@emc.com> Signed-off-by: Boaz Harrosh <bharrosh@panasas.com> Signed-off-by: Jim Rees <rees@umich.edu> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2011-07-31pnfs: save layoutcommit lwb at layout headerPeng Tao
No need to save it for every lseg. [Needed in v3.0] CC: Stable Tree <stable@kernel.org> Signed-off-by: Peng Tao <peng_tao@emc.com> Signed-off-by: Jim Rees <rees@umich.edu> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2011-07-15NFS: Move the pnfs write code into pnfs.cTrond Myklebust
...and ensure that we recoalese to take into account differences in differences in block sizes when falling back to write through the MDS. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2011-07-15NFS: Move the pnfs read code into pnfs.cTrond Myklebust
...and ensure that we recoalese to take into account differences in block sizes when falling back to read through the MDS. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2011-07-12NFSv4.1: do not use deviceids after MDS clientid invalidationAndy Adamson
Mark all deviceids established under an expired MDS clientid as invalid. Stop all new i/o through DS and send through the MDS. Don't use any new LAYOUTGETs that use the invalid deviceid. Purge all layouts established under the expired MDS clientid. Remove the MDS clientid deviceid and data servers reference Signed-off-by: Andy Adamson <andros@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2011-07-12NFSv4.1: File layout only supports whole file layoutsAndy Adamson
Ask for whole file layouts. Until support for layout segments is fully supported in the file layout code, discard non-whole file layouts. Signed-off-by: Andy Adamson <andros@netapp.com> Signed-off-by: Fred Isaman <iisaman@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2011-07-12NFSv4.1: Clean ups for the device id cacheTrond Myklebust
The fact that the global device id cache holds a reference to the nfs4_deviceid_node until it is invisible to rcu lookups implies that we can always assume that the reference count is non-zero in _find_get_deviceid. Also clean up nfs4_put_deviceid_node and the removal of the device id from the cache. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2011-07-12NFSv4.1: Add an initialisation callback for pNFSTrond Myklebust
Ensure that we always get a layout before setting up the i/o request. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2011-07-12NFS: Cleanup of the nfs_pageio code in preparation for a pnfs bugfixTrond Myklebust
We need to ensure that the layouts are set up before we can decide to coalesce requests. To do so, we want to further split up the struct nfs_pageio_descriptor operations into an initialisation callback, a coalescing test callback, and a 'do i/o' callback. This patch cleans up the existing callback methods before adding the 'initialisation' callback. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2011-06-15NFS: fix umount of pnfs filesystemsWeston Andros Adamson
Unmounting a pnfs filesystem hangs using filelayout and possibly others. This fixes the use of the rcu protected node by making use of a new 'tmpnode' for the temporary purge list. Also, the spinlock shouldn't be held when calling synchronize_rcu(). Signed-off-by: Weston Andros Adamson <dros@netapp.com> Signed-off-by: Andy Adamson <andros@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2011-05-29NFSv4.1: use pnfs_generic_pg_test directly by layout driverBenny Halevy
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
2011-05-29NFSv4.1: change pg_test return type to boolBenny Halevy
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
2011-05-29NFSv4.1: unify pnfs_pageio_init functionsBenny Halevy
Use common code for pnfs_pageio_init_{read,write} and use a common generic pg_test function. Note that this function always assumes the the layout driver's pg_test method is implemented. [Fix BUG] Signed-off-by: Boaz Harrosh <bharrosh@panasas.com> Signed-off-by: Benny Halevy <bhalevy@panasas.com>
2011-05-29pnfs: encode_layoutcommitBenny Halevy
Add a layout driver method to encode the layout type specific opaque part of layout commit in-line in the xdr stream. Currently, the pnfs-objects layout driver uses it to encode metadata hints to the MDS and the blocks layout driver to commit provisionally allocated extents to the file. Signed-off-by: Benny Halevy <bhalevy@panasas.com>
2011-05-29pnfs: encode_layoutreturnAndy Adamson
Add a layout driver method to encode the layout type specific opaque part of layout return in-line in the xdr stream. Currently the pnfs-objects layout driver uses it to encode i/o error information on LAYOUTRETURN. Signed-off-by: Andy Adamson <andros@netapp.com> [fixup layout header pointer for encode_layoutreturn] Signed-off-by: Benny Halevy <bhalevy@panasas.com>
2011-05-29pnfs: layoutret_on_setattrBenny Halevy
With the objects layout security model, we have object capabilities that are associated with the layout and we anticipate that the server will issue a cb_layoutrecall for any setattr that changes security related attributes (user/group/mode/acl) or truncates the file. Therefore, the layout is returned before issuing the setattr to avoid the anticipated cb_layoutrecall. Signed-off-by: Benny Halevy <bhalevy@panasas.com>
2011-05-29pnfs: layoutreturnBenny Halevy
NFSv4.1 LAYOUTRETURN implementation Currently, does not support layout-type payload encoding. Signed-off-by: Alexandros Batsakis <batsakis@netapp.com> Signed-off-by: Andy Adamson <andros@citi.umich.edu> Signed-off-by: Andy Adamson <andros@netapp.com> Signed-off-by: Dean Hildebrand <dhildeb@us.ibm.com> Signed-off-by: Fred Isaman <iisaman@citi.umich.edu> Signed-off-by: Fred Isaman <iisaman@netapp.com> Signed-off-by: Marc Eshel <eshel@almaden.ibm.com> Signed-off-by: Zhang Jingwang <zhangjingwang@nrchpc.ac.cn> [call pnfs_return_layout right before pnfs_destroy_layout] [remove assert_spin_locked from pnfs_clear_lseg_list] [remove wait parameter from the layoutreturn path.] [remove return_type field from nfs4_layoutreturn_args] [remove range from nfs4_layoutreturn_args] [no need to send layoutcommit from _pnfs_return_layout] [don't wait on sync layoutreturn] [fix layout stateid in layoutreturn args] [fixed NULL deref in _pnfs_return_layout] [removed recaim member of nfs4_layoutreturn_args] Signed-off-by: Benny Halevy <bhalevy@panasas.com>
2011-05-29pnfs: support for non-rpc layout driversBenny Halevy
Non-rpc layout driver such as for objects and blocks implement their own I/O path and error handling logic. Therefore bypass NFS-based error handling for these layout drivers. [fix lseg ref-count bugs, and null de-refs] [Fall out from: non-rpc layout drivers] Signed-off-by: Boaz Harrosh <bharrosh@panasas.com> [get rid of PNFS_USE_RPC_CODE] [get rid of __nfs4_write_done_cb] [revert useless change in nfs4_write_done_cb] Signed-off-by: Benny Halevy <bhalevy@panasas.com>
2011-05-29pnfs: alloc and free layout_hdr layoutdriver methodsBenny Halevy
[gfp_flags] Signed-off-by: Benny Halevy <bhalevy@panasas.com>
2011-05-29pnfs: Use byte-range for cb_layoutrecallBenny Halevy
Use recalled range to invalidate particular layout segments in the layout cache. Signed-off-by: Benny Halevy <bhalevy@panasas.com>
2011-05-29pnfs: Use byte-range for layoutgetBenny Halevy
Add offset and count parameters to pnfs_update_layout and use them to get the layout in the pageio path. Order cache layout segments in the following order: * offset (ascending) * length (descending) * iomode (RW before READ) Test byte range against the layout segment in use in pnfs_{read,write}_pg_test so not to coalesce pages not using the same layout segment. [fix lseg ordering] [clean up pnfs_find_lseg lseg arg] [remove unnecessary FIXME] [fix ordering in pnfs_insert_layout] [clean up pnfs_insert_layout] Signed-off-by: Benny Halevy <bhalevy@panasas.com>
2011-05-29NFSv4.1: use layout driver in global device cacheBenny Halevy
pnfs deviceids are unique per server, per layout type. struct nfs_client is currently used to distinguish deviceids from different nfs servers, yet these may clash between different layout types on the same server. Therefore, use the layout driver associated with each deviceid at insertion time to look it up, unhash, or delete it. Signed-off-by: Benny Halevy <bhalevy@panasas.com>
2011-05-29pnfs: CB_NOTIFY_DEVICEIDMarc Eshel
Note: This functionlaity is incomplete as all layout segments referring to the 'to be removed device id' need to be reaped, and all in flight I/O drained. [use be32 res in nfs4_callback_devicenotify] [use nfs_client to qualify deviceid for cb_notify_deviceid] [use global deviceid cache for CB_NOTIFY_DEVICEID] [refactor device cache _lookup_deviceid] [refactor device cache _find_get_deviceid] Signed-off-by: Benny Halevy <bhalevy@panasas.com> [Bug in new global-device-cache code] [layout_driver MUST set free_deviceid_node if using dev-cache] Signed-off-by: Boaz Harrosh <bharrosh@panasas.com> Signed-off-by: Benny Halevy <bhalevy@panasas.com>
2011-05-29NFSv4.1: purge deviceid cache on nfs_free_clientBenny Halevy
Use the pnfs_layoutdriver_type both as a qualifier for the deviceid, distinguishing deviceid from different layout types on the server, and for freeing the layout-driver allocated structure containing the nfs4_deviceid_node. [BUG in _deviceid_purge_client] [layout_driver MUST set free_deviceid_node if using dev-cache] [let ver < 4.1 compile] Signed-off-by: Boaz Harrosh <bharrosh@panasas.com> [removed EXPORT_SYMBOL_GPL(nfs4_deviceid_purge_client)] Signed-off-by: Benny Halevy <bhalevy@panasas.com>
2011-05-29NFSv4.1: make deviceid cache globalBenny Halevy
Move deviceid cache from the pnfs files layout driver to the generic layer in preparation for the objects layout driver. Signed-off-by: Benny Halevy <bhalevy@panasas.com>
2011-05-29pnfs: resolve header dependency in pnfs.hBenny Halevy
Some definitions in the header file depend on nfs_fs.h so pnfs.h can't be included independently. Signed-off-by: Benny Halevy <bhalevy@panasas.com>
2011-05-11NFSv4.1: Ensure that layoutget uses the correct gfp modesTrond Myklebust
Currently, writebacks may end up recursing back into the filesystem due to GFP_KERNEL direct reclaims in the pnfs subsystem. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2011-03-24Cleanup XDR parsing for LAYOUTGET, GETDEVICEINFOWeston Andros Adamson
changes LAYOUTGET and GETDEVICEINFO XDR parsing to: - not use vmap, which doesn't work on incoherent archs - use xdr_stream parsing for all xdr Signed-off-by: Weston Andros Adamson <dros@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2011-03-24NFSv4.1 convert layoutcommit sync to booleanAndy Adamson
Signed-off-by: Andy Adamson <andros@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2011-03-23NFSv4.1: layoutcommitAndy Adamson
The filelayout driver sends LAYOUTCOMMIT only when COMMIT goes to the data server (as opposed to the MDS) and the data server WRITE is not NFS_FILE_SYNC. Only whole file layout support means that there is only one IOMODE_RW layout segment. Signed-off-by: Andy Adamson <andros@netapp.com> Signed-off-by: Alexandros Batsakis <batsakis@netapp.com> Signed-off-by: Boaz Harrosh <bharrosh@panasas.com> Signed-off-by: Dean Hildebrand <dhildeb@us.ibm.com> Signed-off-by: Fred Isaman <iisaman@citi.umich.edu> Signed-off-by: Mingyang Guo <guomingyang@nrchpc.ac.cn> Signed-off-by: Tao Guo <guotao@nrchpc.ac.cn> Signed-off-by: Zhang Jingwang <zhangjingwang@nrchpc.ac.cn> Tested-by: Boaz Harrosh <bharrosh@panasas.com> Signed-off-by: Benny Halevy <bhalevy@panasas.com> Signed-off-by: Fred Isaman <iisaman@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2011-03-23NFSv4.1: add generic layer hooks for pnfs COMMITFred Isaman
We create three major hooks for the pnfs code. pnfs_mark_request_commit() is called during writeback_done from nfs_mark_request_commit, which gives the driver an opportunity to claim it wants control over commiting a particular req. pnfs_choose_commit_list() is called from nfs_scan_list to choose which list a given req should be added to, based on where we intend to send it for COMMIT. It is up to the driver to have preallocated list headers for each destination it may need. pnfs_commit_list() is how the driver actually takes control, it is used instead of nfs_commit_list(). In order to pass information between the above functions, we create a union in nfs_page to hold a lseg (which is possible because the req is not on any list while in transition), and add some flags to indicate if we need to use the pnfs code. Signed-off-by: Fred Isaman <iisaman@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2011-03-11NFSv4.1: implement generic pnfs layer write switchAndy Adamson
Signed-off-by: Andy Adamson <andros@citi.umich.edu> Signed-off-by: Boaz Harrosh <bharrosh@panasas.com> Signed-off-by: Dean Hildebrand <dhildeb@us.ibm.com> Signed-off-by: Fred Isaman <iisaman@citi.umich.edu> Signed-off-by: J. Bruce Fields <bfields@fieldses.org> Signed-off-by: Mike Sager <sager@netapp.com> Signed-off-by: Ricardo Labiaga <Ricardo.Labiaga@netapp.com> Signed-off-by: Tao Guo <guotao@nrchpc.ac.cn> Signed-off-by: Andy Adamson <andros@netapp.com> Signed-off-by: Benny Halevy <bhalevy@panasas.com> Signed-off-by: Fred Isaman <iisaman@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2011-03-11NFSv4.1: trigger LAYOUTGET for writesFred Isaman
Signed-off-by: Fred Isaman <iisaman@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2011-03-11NFSv4.1 move deviceid cache to filelayout driverChristoph Hellwig
No need for generic cache with only one user. Keep a simple hash of deviceids in the filelayout driver. Signed-off-by: Christoph Hellwig <hch@infradead.org> Acked-by: Andy Adamson <andros@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2011-03-11NFSv4.1: generic readAndy Adamson
Separate the rpc run portion of nfs_read_rpcsetup into a new function nfs_initiate_read that is called for normal NFS I/O. Add a pNFS read_pagelist function that is called instead of nfs_intitate_read for pNFS reads. Signed-off-by: Andy Adamson <andros@citi.umich.edu> Signed-off-by: Boaz Harrosh <bharrosh@panasas.com> Signed-off-by: Dean Hildebrand <dhildeb@us.ibm.com> Signed-off-by: Fred Isaman <iisaman@citi.umich.edu> Signed-off-by: Fred Isaman <iisaman@netapp.com> Signed-off-by: Mike Sager <sager@netapp.com> Signed-off-by: Mingyang Guo <guomingyang@nrchpc.ac.cn> Signed-off-by: Ricardo Labiaga <Ricardo.Labiaga@netapp.com> Signed-off-by: Tao Guo <guotao@nrchpc.ac.cn> Signed-off-by: Andy Adamson <andros@netapp.com> Signed-off-by: Benny Halevy <bhalevy@panasas.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2011-03-11NFSv4.1: shift pnfs_update_layout locationsFred Isaman
Move the pnfs_update_layout call location to nfs_pageio_do_add_request(). Grab the lseg sent in the doio function to nfs_read_rpcsetup and attach it to each nfs_read_data so it can be sent to the layout driver. Signed-off-by: Andy Adamson <andros@netapp.com> Signed-off-by: Andy Adamson <andros@citi.umich.edu> Signed-off-by: Dean Hildebrand <dhildeb@us.ibm.com> Signed-off-by: Fred Isaman <iisaman@citi.umich.edu> Signed-off-by: Fred Isaman <iisaman@netapp.com> Signed-off-by: Benny Halevy <bhalevy@panasas.com> Signed-off-by: Boaz Harrosh <bharrosh@panasas.com> Signed-off-by: Oleg Drokin <green@linuxhacker.ru> Signed-off-by: Tao Guo <guotao@nrchpc.ac.cn> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2011-03-11NFSv4.1: coelesce across layout stripesFred Isaman
Add a pg_test layout driver hook which is used to avoid coelescing I/O across layout stripes. Signed-off-by: Andy Adamson <andros@netapp.com> Signed-off-by: Andy Adamson <andros@citi.umich.edu> Signed-off-by: Dean Hildebrand <dhildeb@us.ibm.com> Signed-off-by: Fred Isaman <iisaman@citi.umich.edu> Signed-off-by: Fred Isaman <iisaman@netapp.com> Signed-off-by: Benny Halevy <bhalevy@panasas.com> Signed-off-by: Boaz Harrosh <bharrosh@panasas.com> Signed-off-by: Oleg Drokin <green@linuxhacker.ru> Signed-off-by: Tao Guo <guotao@nrchpc.ac.cn> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2011-03-11NFSv4.1: lseg refcountingFred Isaman
Prepare put_lseg and get_lseg to be called from the pNFS I/O code. Pull common code from pnfs_lseg_locked to call from pnfs_lseg. Inline pnfs_lseg_locked into it's only caller. Signed-off-by: Fred Isaman <iisaman@netapp.com> Signed-off-by: Benny Halevy <bhalevy@panasas.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2011-01-06pnfs: layout roc codeFred Isaman
A layout can request return-on-close. How this interacts with the forgetful model of never sending LAYOUTRETURNS is a bit ambiguous. We forget any layouts marked roc, and wait for them to be completely forgotten before continuing with the close. In addition, to compensate for races with any inflight LAYOUTGETs, and the fact that we do not get any layout stateid back from the server, we set the barrier to the worst case scenario of current_seqid + number of outstanding LAYOUTGETS. Signed-off-by: Fred Isaman <iisaman@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2011-01-06pnfs: add CB_LAYOUTRECALL handlingFred Isaman
This is the heart of the wave 2 submission. Add the code to trigger drain and forget of any afected layouts. In addition, we set a "barrier", below which any LAYOUTGET reply is ignored. This is to compensate for the fact that we do not wait for outstanding LAYOUTGETs to complete as per section 12.5.5.2.1 of RFC 5661. Signed-off-by: Fred Isaman <iisaman@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-05-13 18:35:18 +0000