| Age | Commit message (Collapse) | Author |
|---|
|
Fix this garbage happening quite often:
==> sda:
scsi 3:0:0:0: CD-ROM TOSHIBA
==> sda1 sda2 sda3 sda4 <sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
^^^
Uniform CD-ROM driver Revision: 3.20
sr 3:0:0:0: Attached scsi CD-ROM sr0
==> sda5 sda6 sda7 >
Make "sda: sda1 ..." lines actually lines.
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6: (69 commits)
fix handling of offsets in cris eeprom.c, get rid of fake on-stack files
get rid of home-grown mutex in cris eeprom.c
switch ecryptfs_write() to struct inode *, kill on-stack fake files
switch ecryptfs_get_locked_page() to struct inode *
simplify access to ecryptfs inodes in ->readpage() and friends
AFS: Don't put struct file on the stack
Ban ecryptfs over ecryptfs
logfs: replace inode uid,gid,mode initialization with helper function
ufs: replace inode uid,gid,mode initialization with helper function
udf: replace inode uid,gid,mode init with helper
ubifs: replace inode uid,gid,mode initialization with helper function
sysv: replace inode uid,gid,mode initialization with helper function
reiserfs: replace inode uid,gid,mode initialization with helper function
ramfs: replace inode uid,gid,mode initialization with helper function
omfs: replace inode uid,gid,mode initialization with helper function
bfs: replace inode uid,gid,mode initialization with helper function
ocfs2: replace inode uid,gid,mode initialization with helper function
nilfs2: replace inode uid,gid,mode initialization with helper function
minix: replace inode uid,gid,mode init with helper
ext4: replace inode uid,gid,mode init with helper
...
Trivial conflict in fs/fs-writeback.c (mark bitfields unsigned)
|
|
ADDPART_FLAG_RAID was introduced in commit d18d768, and most places were
converted to use it instead of a hardcoded value. However, some places seem
to have been missed.
Change all of them to the symbolic names via the following semantic patch:
@@
struct parsed_partitions *state;
expression E;
@@
(
- state->parts[E].flags = 1
+ state->parts[E].flags = ADDPART_FLAG_RAID
|
- state->parts[E].flags |= 1
+ state->parts[E].flags |= ADDPART_FLAG_RAID
|
- state->parts[E].flags = 2
+ state->parts[E].flags = ADDPART_FLAG_WHOLEDISK
|
- state->parts[E].flags |= 2
+ state->parts[E].flags |= ADDPART_FLAG_WHOLEDISK
)
Signed-off-by: Cesar Eduardo Barros <cesarb@cesarb.net>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Make the following changes to partition check code.
* Add ->bdev to struct parsed_partitions.
* Introduce read_part_sector() which is a simple wrapper around
read_dev_sector() which takes struct parsed_partitions *state
instead of @bdev.
* For functions which used to take @state and @bdev, drop @bdev. For
functions which used to take @bdev, replace it with @state.
* While updating, drop superflous checks on NULL state/bdev in ldm.c.
This cleans up the API a bit and enables better handling of IO errors
during partition check as the generic partition check code now has
much better visibility into what went wrong in the low level code
paths.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Ben Hutchings <ben@decadent.org.uk>
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
|
|
Smaller size than a minimum blocksize can't be used, after all it's
handled like 0 size.
For extended partition itself, this makes sure to use bigger size than one
logical sector size at least.
Signed-off-by: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
Cc: Daniel Taylor <Daniel.Taylor@wdc.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
In order to use disks larger than 2TiB on Windows XP, it is necessary to
use 4096-byte logical sectors in an MBR.
Although the kernel storage and functions called from msdos.c used
"sector_t" internally, msdos.c still used u32 variables, which results in
the ability to handle XP-compatible large disks.
This patch changes the internal variables to "sector_t".
Daniel said: "In the near future, WD will be releasing products that need
this patch".
[hirofumi@mail.parknet.co.jp: tweaks and fix]
Signed-off-by: Daniel Taylor <daniel.taylor@wdc.com>
Signed-off-by: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Until now we have had a 1:1 mapping between storage device physical
block size and the logical block sized used when addressing the device.
With SATA 4KB drives coming out that will no longer be the case. The
sector size will be 4KB but the logical block size will remain
512-bytes. Hence we need to distinguish between the physical block size
and the logical ditto.
This patch renames hardsect_size to logical_block_size.
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
|
|
I received a complaint that some FAT formated medias (e.g. sd memory cards)
trigger a "unknown partition table" message even though there is no partition
table and they work correctly, while in general (when e.g. formated with
mkdosfs or even Windows Vista) this message is not shown.
Currently this seems only to happen when the medias get formatted with Windows
XP (and possibly Win 2000). Then the boot indicator byte contains garbage
(part of text message) and so do the other parts checked by msdos_paritition
which then later triggers this message.
References: novell bug #364365
Most fat formatted media without partition table contains zeros in the boot
indication and the other tested bytes and so falls through the checks in
msdos_partition, leading it to return with 1 (all is fine).
But some (e.g. WinXP formatted) fat fomated medias don't use boot_ind and so
the check fails and causes a "unkown partition table" warning eventhough there
is none and everything would be fine.
This additional check directly verifies if there is a fat formatted medium
without a partition table.
Signed-off-by: Frank Seidel <fseidel@suse.de>
Cc: Andreas Dilger <adilger@sun.com>
Acked-by: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Correct the Solaris x86 number of partitions (slices) is a way that is
backward compatible with the earlier size.
This works without a new VTOC structure definition as the timestamp
and v_asciilabel fields in the VTOC are not used by the kernel yet.
Signed-off-by: Mark Fortescue <mark@mtfhpc.demon.co.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
* master.kernel.org:/pub/scm/linux/kernel/git/davem/sparc-2.6:
[SPARC64]: Update defconfig.
[SPARC64]: Add PCI MSI support on Niagara.
[SPARC64] IRQ: Use irq_desc->chip_data instead of irq_desc->handler_data
[SPARC64]: Add obppath sysfs attribute for SBUS and PCI devices.
[PARTITION]: Add whole_disk attribute.
|
|
Correct the AIX magic check to let 'echo > /dev/sdb' actually work.
Signed-off-by: Olaf Hering <olh@suse.de>
Cc: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
Cc: Anton Blanchard <anton@samba.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
The patch to identify AIX disks and ignore them has caused at least one
machine to fail to find the root partition on 2.6.19. The patch is:
http://lkml.org/lkml/2006/7/31/117
The problem is some disk formatters do not blow away the first 4 bytes
of the disk. If the disk we are installing to used to have AIX on it,
then the first 4 bytes will still have IBMA in EBCDIC.
The install in question was debian etch. Im not sure what the best fix
is, perhaps the AIX detection code could check more than the first 4
bytes.
The whole partition info for primary partitions is in this block:
dd if=/dev/sdb count=$(( 4 * 16 )) bs=1 skip=$(( 0x1be ))
All other data do not matter, beside the 0x55aa marker at the end of the
first block.
Signed-off-by: Olaf Hering <olh@suse.de>
Cc: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
Cc: Anton Blanchard <anton@samba.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Some partitioning systems create special partitions that
span the entire disk. One example are Sun partitions, and
this whole-disk partition exists to tell the firmware the
extent of the entire device so it can load the boot block
and do other things.
Such partitions should not be treated as normal partitions,
because all the other partitions overlap this whole-disk one.
So we'd see multiple instances of the same UUID etc. which
we do not want. udev and friends can thus search for this
'whole_disk' attribute and use it to decide to ignore the
partition.
Signed-off-by: Fabio Massimo Di Nitto <fabbione@ubuntu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
|
The on-disk data structures from AIX are not known, also the filesystem
layout is not known. There is a msdos partition signature at the end of
the first block, and the kernel recognizes 3 small (and overlapping)
partitions. But they are not usable. Maybe the firmware uses it to find
the bootloader for AIX, but AIX boots also if the first block is cleared.
This is the content of the partition table:
# dd if=/dev/sdb count=$(( 4 * 16 )) bs=1 skip=$(( 0x1be )) | xxd
0000000: 0000 0000 0000 0000 0000 0000 0000 0000 ................
0000010: 80ff ffff 41ff ffff 1b11 0000 381b 0000 ....A.......8...
0000020: 00ff ffff 41ff ffff 0211 0000 1900 0000 ....A...........
0000030: 80ff ffff 41ff ffff 1b11 0000 381b 0000 ....A.......8...
Handle the whole disk as empty disk.
This fixes also YaST which compares the output from parted (and formerly
fdisk) with /proc/partitions. fdisk recognizes the AIX label since a long
time, SuSE has a patch for parted to handle the disk label as unknown.
dmesg will look like this:
sda: [AIX] unknown partition table
Tested on an IBM B50 with AIX V4.3.3.
Signed-off-by: Olaf Hering <olh@suse.de>
Cc: Albert Cahalan <acahalan@gmail.com>
Cc: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
|
Signed-off-by: Jörn Engel <joern@wohnheim.fh-wedel.de>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
|
|
This patch makes the following changes to the msdos partition code:
- remove CONFIG_NEC98_PARTITION leftovers
- make parse_bsd static
This patch was already ACK'ed by Andries Brouwer.
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
|
This change from March 3rd causes the partition parsing code to ignore
partitions which have a signature byte of zero. Turns out that more people
have such partitions than we expected, and their device numbering is coming up
wrong in post-2.6.11 kernels.
So revert the change while we think about the problem a bit more.
Cc: Andries Brouwer <Andries.Brouwer@cwi.nl>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
|
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.
Let it rip!
|
