| Age | Commit message (Collapse) | Author |
|---|
|
There is no fundamental need to keep an in-memory inode size copy in the XFS
inode. We already have the on-disk value in the dinode, and the separate
in-memory copy that we need for regular files only in the XFS inode.
Remove the xfs_inode i_size field and change the XFS_ISIZE macro to use the
VFS inode i_size field for regular files. Switch code that was directly
accessing the i_size field in the xfs_inode to XFS_ISIZE, or in cases where
we are limited to regular files direct access of the VFS inode i_size field.
This also allows dropping some fairly complicated code in the write path
which dealt with keeping the xfs_inode i_size uptodate with the VFS i_size
that is getting updated inside ->write_end.
Note that we do not bother resetting the VFS i_size when truncating a file
that gets freed to zero as there is no point in doing so because the VFS inode
is no longer in use at this point. Just relax the assert in xfs_ifree to
only check the on-disk size instead.
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Ben Myers <bpm@sgi.com>
|
|
Replace i_pin_wait, which is only used during synchronous inode flushing
with a bit waitqueue. This trades off a much smaller inode against
slightly slower wakeup performance, and saves 12 (32-bit) or 20 (64-bit)
bytes in the XFS inode.
Reviewed-by: Alex Elder <aelder@sgi.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Ben Myers <bpm@sgi.com>
|
|
We almost never block on i_flock, the exception is synchronous inode
flushing. Instead of bloating the inode with a 16/24-byte completion
that we abuse as a semaphore just implement it as a bitlock that uses
a bit waitqueue for the rare sleeping path. This primarily is a
tradeoff between a much smaller inode and a faster non-blocking
path vs faster wakeups, and we are much better off with the former.
A small downside is that we will lose lockdep checking for i_flock, but
given that it's always taken inside the ilock that should be acceptable.
Note that for example the inode writeback locking is implemented in a
very similar way.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Alex Elder <aelder@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
|
|
To be used for bit wakeup i_flags needs to be an unsigned long or we'll
run into trouble on big endian systems. Because of the 1-byte i_update
field right after it this actually causes a fairly large size increase
on its own (4 or 8 bytes), but that increase will be more than offset
by the next two patches.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Alex Elder <aelder@sgi.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
|
|
We spent a lot of effort to maintain this field, but it always equals to the
fork size divided by the constant size of an extent. The prime use of it is
to assert that the two stay in sync. Just divide the fork size by the extent
size in the few places that we actually use it and remove the overhead
of maintaining it. Also introduce a few helpers to consolidate the places
where we actually care about the value.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
|
|
.. and the just as dead bhv_desc forward declaration while we're at it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Alex Elder <aelder@sgi.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
|
|
Replace the nasty if, else if, elseif condition with more natural C flow
that expressed the logic we want here better.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
|
|
This wrapper isn't overly useful, not to say rather confusing.
Around the call to xfs_itruncate_extents it does:
- add tracing
- add a few asserts in debug builds
- conditionally update the inode size in two places
- log the inode
Both the tracing and the inode logging can be moved to xfs_itruncate_extents
as they are useful for the attribute fork as well - in fact the attr code
already does an equivalent xfs_trans_log_inode call just after calling
xfs_itruncate_extents. The conditional size updates are a mess, and there
was no reason to do them in two places anyway, as the first one was
conditional on the inode having extents - but without extents we
xfs_itruncate_extents would be a no-op and the placement wouldn't matter
anyway. Instead move the size assignments and the asserts that make sense
to the callers that want it.
As a side effect of this clean up xfs_setattr_size by introducing variables
for the old and new inode size, and moving the size updates into a common
place.
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Ben Myers <bpm@sgi.com>
|
|
Andrew explains:
- various misc stuff
- Most of the rest of MM: memcg, threaded hugepages, others.
- cpumask
- kexec
- kdump
- some direct-io performance tweaking
- radix-tree optimisations
- new selftests code
A note on this: often people will develop a new userspace-visible
feature and will develop userspace code to exercise/test that
feature. Then they merge the patch and the selftest code dies.
Sometimes we paste it into the changelog. Sometimes the code gets
thrown into Documentation/(!).
This saddens me. So this patch creates a bare-bones framework which
will henceforth allow me to ask people to include their test apps in
the kernel tree so we can keep them alive. Then when people enhance
or fix the feature, I can ask them to update the test app too.
The infrastruture is terribly trivial at present - let's see how it
evolves.
- checkpoint/restart feature work.
A note on this: this is a project by various mad Russians to perform
c/r mainly from userspace, with various oddball helper code added
into the kernel where the need is demonstrated.
So rather than some large central lump of code, what we have is
little bits and pieces popping up in various places which either
expose something new or which permit something which is normally
kernel-private to be modified.
The overall project is an ongoing thing. I've judged that the size
and scope of the thing means that we're more likely to be successful
with it if we integrate the support into mainline piecemeal rather
than allowing it all to develop out-of-tree.
However I'm less confident than the developers that it will all
eventually work! So what I'm asking them to do is to wrap each piece
of new code inside CONFIG_CHECKPOINT_RESTORE. So if it all
eventually comes to tears and the project as a whole fails, it should
be a simple matter to go through and delete all trace of it.
This lot pretty much wraps up the -rc1 merge for me.
* akpm: (96 commits)
unlzo: fix input buffer free
ramoops: update parameters only after successful init
ramoops: fix use of rounddown_pow_of_two()
c/r: prctl: add PR_SET_MM codes to set up mm_struct entries
c/r: procfs: add start_data, end_data, start_brk members to /proc/$pid/stat v4
c/r: introduce CHECKPOINT_RESTORE symbol
selftests: new x86 breakpoints selftest
selftests: new very basic kernel selftests directory
radix_tree: take radix_tree_path off stack
radix_tree: remove radix_tree_indirect_to_ptr()
dio: optimize cache misses in the submission path
vfs: cache request_queue in struct block_device
fs/direct-io.c: calculate fs_count correctly in get_more_blocks()
drivers/parport/parport_pc.c: fix warnings
panic: don't print redundant backtraces on oops
sysctl: add the kernel.ns_last_pid control
kdump: add udev events for memory online/offline
include/linux/crash_dump.h needs elf.h
kdump: fix crash_kexec()/smp_send_stop() race in panic()
kdump: crashk_res init check for /sys/kernel/kexec_crash_size
...
|
|
The mm->start_code/end_code, mm->start_data/end_data, mm->start_brk are
involved into calculation of program text/data segment sizes (which might
be seen in /proc/<pid>/statm) and into brk() call final address.
For restore we need to know all these values. While
mm->start_code/end_code already present in /proc/$pid/stat, the rest
members are not, so this patch brings them in.
The restore procedure of these members is addressed in another patch using
prctl().
Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org>
Acked-by: Serge Hallyn <serge.hallyn@canonical.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Andrew Vagin <avagin@openvz.org>
Cc: Vasiliy Kulikov <segoon@openwall.com>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Some investigation of a transaction processing workload showed that a
major consumer of cycles in __blockdev_direct_IO is the cache miss while
accessing the block size. This is because it has to walk the chain from
block_dev to gendisk to queue.
The block size is needed early on to check alignment and sizes. It's only
done if the check for the inode block size fails. But the costly block
device state is unconditionally fetched.
- Reorganize the code to only fetch block dev state when actually
needed.
Then do a prefetch on the block dev early on in the direct IO path. This
is worth it, because there is substantial code run before we actually
touch the block dev now.
- I also added some unlikelies to make it clear the compiler that block
device fetch code is not normally executed.
This gave a small, but measurable improvement on a large database
benchmark (about 0.3%)
[akpm@linux-foundation.org: coding-style fixes]
[sfr@canb.auug.org.au: using prefetch requires including prefetch.h]
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Cc: Jeff Moyer <jmoyer@redhat.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
This makes it possible to get from the inode to the request_queue with one
less cache miss. Used in followon optimization.
The livetime of the pointer is the same as the gendisk.
This assumes that the queue will always stay the same in the gendisk while
it's visible to block_devices. I think that's safe correct?
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Jeff Moyer <jmoyer@redhat.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
In get_more_blocks(), we use dio_count to calcuate fs_count and do some
tricky things to increase fs_count if dio_count isn't aligned. But
actually it still has some corner cases that can't be coverd. See the
following example:
dio_write foo -s 1024 -w 4096
(direct write 4096 bytes at offset 1024). The same goes if the offset
isn't aligned to fs_blocksize.
In this case, the old calculation counts fs_count to be 1, but actually we
will write into 2 different blocks (if fs_blocksize=4096). The old code
just works, since it will call get_block twice (and may have to allocate
and create extents twice for filesystems like ext4). So we'd better call
get_block just once with the proper fs_count.
Signed-off-by: Tao Ma <boyu.mt@taobao.com>
Cc: "Theodore Ts'o" <tytso@mit.edu>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
This patch adds a lightweight sync migrate operation MIGRATE_SYNC_LIGHT
mode that avoids writing back pages to backing storage. Async compaction
maps to MIGRATE_ASYNC while sync compaction maps to MIGRATE_SYNC_LIGHT.
For other migrate_pages users such as memory hotplug, MIGRATE_SYNC is
used.
This avoids sync compaction stalling for an excessive length of time,
particularly when copying files to a USB stick where there might be a
large number of dirty pages backed by a filesystem that does not support
->writepages.
[aarcange@redhat.com: This patch is heavily based on Andrea's work]
[akpm@linux-foundation.org: fix fs/nfs/write.c build]
[akpm@linux-foundation.org: fix fs/btrfs/disk-io.c build]
Signed-off-by: Mel Gorman <mgorman@suse.de>
Reviewed-by: Rik van Riel <riel@redhat.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Minchan Kim <minchan.kim@gmail.com>
Cc: Dave Jones <davej@redhat.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Andy Isaacson <adi@hexapodia.org>
Cc: Nai Xia <nai.xia@gmail.com>
Cc: Johannes Weiner <jweiner@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
within ->migratepage
Asynchronous compaction is used when allocating transparent hugepages to
avoid blocking for long periods of time. Due to reports of stalling,
there was a debate on disabling synchronous compaction but this severely
impacted allocation success rates. Part of the reason was that many dirty
pages are skipped in asynchronous compaction by the following check;
if (PageDirty(page) && !sync &&
mapping->a_ops->migratepage != migrate_page)
rc = -EBUSY;
This skips over all mapping aops using buffer_migrate_page() even though
it is possible to migrate some of these pages without blocking. This
patch updates the ->migratepage callback with a "sync" parameter. It is
the responsibility of the callback to fail gracefully if migration would
block.
Signed-off-by: Mel Gorman <mgorman@suse.de>
Reviewed-by: Rik van Riel <riel@redhat.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Minchan Kim <minchan.kim@gmail.com>
Cc: Dave Jones <davej@redhat.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Andy Isaacson <adi@hexapodia.org>
Cc: Nai Xia <nai.xia@gmail.com>
Cc: Johannes Weiner <jweiner@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
The current epoll code can be tickled to run basically indefinitely in
both loop detection path check (on ep_insert()), and in the wakeup paths.
The programs that tickle this behavior set up deeply linked networks of
epoll file descriptors that cause the epoll algorithms to traverse them
indefinitely. A couple of these sample programs have been previously
posted in this thread: https://lkml.org/lkml/2011/2/25/297.
To fix the loop detection path check algorithms, I simply keep track of
the epoll nodes that have been already visited. Thus, the loop detection
becomes proportional to the number of epoll file descriptor and links.
This dramatically decreases the run-time of the loop check algorithm. In
one diabolical case I tried it reduced the run-time from 15 mintues (all
in kernel time) to .3 seconds.
Fixing the wakeup paths could be done at wakeup time in a similar manner
by keeping track of nodes that have already been visited, but the
complexity is harder, since there can be multiple wakeups on different
cpus...Thus, I've opted to limit the number of possible wakeup paths when
the paths are created.
This is accomplished, by noting that the end file descriptor points that
are found during the loop detection pass (from the newly added link), are
actually the sources for wakeup events. I keep a list of these file
descriptors and limit the number and length of these paths that emanate
from these 'source file descriptors'. In the current implemetation I
allow 1000 paths of length 1, 500 of length 2, 100 of length 3, 50 of
length 4 and 10 of length 5. Note that it is sufficient to check the
'source file descriptors' reachable from the newly added link, since no
other 'source file descriptors' will have newly added links. This allows
us to check only the wakeup paths that may have gotten too long, and not
re-check all possible wakeup paths on the system.
In terms of the path limit selection, I think its first worth noting that
the most common case for epoll, is probably the model where you have 1
epoll file descriptor that is monitoring n number of 'source file
descriptors'. In this case, each 'source file descriptor' has a 1 path of
length 1. Thus, I believe that the limits I'm proposing are quite
reasonable and in fact may be too generous. Thus, I'm hoping that the
proposed limits will not prevent any workloads that currently work to
fail.
In terms of locking, I have extended the use of the 'epmutex' to all
epoll_ctl add and remove operations. Currently its only used in a subset
of the add paths. I need to hold the epmutex, so that we can correctly
traverse a coherent graph, to check the number of paths. I believe that
this additional locking is probably ok, since its in the setup/teardown
paths, and doesn't affect the running paths, but it certainly is going to
add some extra overhead. Also, worth noting is that the epmuex was
recently added to the ep_ctl add operations in the initial path loop
detection code using the argument that it was not on a critical path.
Another thing to note here, is the length of epoll chains that is allowed.
Currently, eventpoll.c defines:
/* Maximum number of nesting allowed inside epoll sets */
#define EP_MAX_NESTS 4
This basically means that I am limited to a graph depth of 5 (EP_MAX_NESTS
+ 1). However, this limit is currently only enforced during the loop
check detection code, and only when the epoll file descriptors are added
in a certain order. Thus, this limit is currently easily bypassed. The
newly added check for wakeup paths, stricly limits the wakeup paths to a
length of 5, regardless of the order in which ep's are linked together.
Thus, a side-effect of the new code is a more consistent enforcement of
the graph depth.
Thus far, I've tested this, using the sample programs previously
mentioned, which now either return quickly or return -EINVAL. I've also
testing using the piptest.c epoll tester, which showed no difference in
performance. I've also created a number of different epoll networks and
tested that they behave as expectded.
I believe this solves the original diabolical test cases, while still
preserving the sane epoll nesting.
Signed-off-by: Jason Baron <jbaron@redhat.com>
Cc: Nelson Elhage <nelhage@ksplice.com>
Cc: Davide Libenzi <davidel@xmailserver.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
When a user with the CAP_SYS_RESOURCE cap tries to F_SETPIPE_SZ a pipe
with size bigger than kmalloc() can alloc it spits out an ugly warning:
------------[ cut here ]------------
WARNING: at mm/page_alloc.c:2095 __alloc_pages_nodemask+0x5d3/0x7a0()
Pid: 733, comm: a.out Not tainted 3.2.0-rc1+ #4
Call Trace:
warn_slowpath_common+0x75/0xb0
warn_slowpath_null+0x15/0x20
__alloc_pages_nodemask+0x5d3/0x7a0
__get_free_pages+0x12/0x50
__kmalloc+0x12b/0x150
pipe_set_size+0x75/0x120
pipe_fcntl+0xf8/0x140
do_fcntl+0x2d4/0x410
sys_fcntl+0x66/0xa0
system_call_fastpath+0x16/0x1b
---[ end trace 432f702e6db7b5ee ]---
Instead, make kcalloc() handle the overflow case and fail quietly.
[akpm@linux-foundation.org: switch to sizeof(*bufs) for 80-column niceness]
Signed-off-by: Sasha Levin <levinsasha928@gmail.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Acked-by: Pekka Enberg <penberg@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
get_proc_task() can fail to search the task and return NULL,
put_task_struct() will then bomb the kernel with following oops:
BUG: unable to handle kernel NULL pointer dereference at 0000000000000010
IP: [<ffffffff81217d34>] proc_pid_permission+0x64/0xe0
PGD 112075067 PUD 112814067 PMD 0
Oops: 0002 [#1] PREEMPT SMP
This is a regression introduced by commit 0499680a ("procfs: add hidepid=
and gid= mount options"). The kernel should return -ESRCH if
get_proc_task() failed.
Signed-off-by: Xiaotian Feng <dannyfeng@tencent.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Vasiliy Kulikov <segoon@openwall.com>
Cc: Stephen Wilson <wilsons@start.ca>
Acked-by: David Rientjes <rientjes@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse:
FUSE: Notifying the kernel of deletion.
fuse: support ioctl on directories
fuse: Use kcalloc instead of kzalloc to allocate array
fuse: llseek optimize SEEK_CUR and SEEK_SET
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
autofs4: deal with autofs4_write/autofs4_write races
autofs4: catatonic_mode vs. notify_daemon race
autofs4: autofs4_wait() vs. autofs4_catatonic_mode() race
hfsplus: creation of hidden dir on mount can fail
block_dev: Suppress bdev_cache_init() kmemleak warninig
fix shrink_dcache_parent() livelock
coda: switch coda_cnode_make() to sane API as well, clean coda_lookup()
coda: deal correctly with allocation failure from coda_cnode_makectl()
securityfs: fix object creation races
|
|
Just serialize the actual writing of packets into pipe on
a new mutex, independent from everything else in the locking
hierarchy. As soon as something has started feeding a piece
of packet into the pipe to daemon, we *want* everything else
about to try the same to wait until we are done.
Acked-by: Ian Kent <raven@themaw.net>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
we need to hold ->wq_mutex while we are forming the packet to send,
lest we have autofs4_catatonic_mode() setting wq->name.name to NULL
just as autofs4_notify_daemon() decides to memcpy() from it...
We do have check for catatonic mode immediately after that (under
->wq_mutex, as it ought to be) and packet won't be actually sent,
but it'll be too late for us if we oops on that memcpy() from NULL...
Fix is obvious - just extend the area covered by ->wq_mutex over
that switch and check whether it's catatonic *before* doing anything
else.
Acked-by: Ian Kent <raven@themaw.net>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
We need to recheck ->catatonic after autofs4_wait() got ->wq_mutex
for good, or we might end up with wq inserted into queue after
autofs4_catatonic_mode() had done its thing. It will stick there
forever, since there won't be anything to clear its ->name.name.
A bit of a complication: validate_request() drops and regains ->wq_mutex.
It actually ends up the most convenient place to stick the check into...
Acked-by: Ian Kent <raven@themaw.net>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/wfg/linux
* 'writeback-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/wfg/linux:
writeback: move MIN_WRITEBACK_PAGES to fs-writeback.c
writeback: balanced_rate cannot exceed write bandwidth
writeback: do strict bdi dirty_exceeded
writeback: avoid tiny dirty poll intervals
writeback: max, min and target dirty pause time
writeback: dirty ratelimit - think time compensation
btrfs: fix dirtied pages accounting on sub-page writes
writeback: fix dirtied pages accounting on redirty
writeback: fix dirtied pages accounting on sub-page writes
writeback: charge leaked page dirties to active tasks
writeback: Include all dirty inodes in background writeback
|
|
Andrew elucidates:
- First installmeant of MM. We have a HUGE number of MM patches this
time. It's crazy.
- MAINTAINERS updates
- backlight updates
- leds
- checkpatch updates
- misc ELF stuff
- rtc updates
- reiserfs
- procfs
- some misc other bits
* akpm: (124 commits)
user namespace: make signal.c respect user namespaces
workqueue: make alloc_workqueue() take printf fmt and args for name
procfs: add hidepid= and gid= mount options
procfs: parse mount options
procfs: introduce the /proc/<pid>/map_files/ directory
procfs: make proc_get_link to use dentry instead of inode
signal: add block_sigmask() for adding sigmask to current->blocked
sparc: make SA_NOMASK a synonym of SA_NODEFER
reiserfs: don't lock root inode searching
reiserfs: don't lock journal_init()
reiserfs: delay reiserfs lock until journal initialization
reiserfs: delete comments referring to the BKL
drivers/rtc/interface.c: fix alarm rollover when day or month is out-of-range
drivers/rtc/rtc-twl.c: add DT support for RTC inside twl4030/twl6030
drivers/rtc/: remove redundant spi driver bus initialization
drivers/rtc/rtc-jz4740.c: make jz4740_rtc_driver static
drivers/rtc/rtc-mc13xxx.c: make mc13xxx_rtc_idtable static
rtc: convert drivers/rtc/* to use module_platform_driver()
drivers/rtc/rtc-wm831x.c: convert to devm_kzalloc()
drivers/rtc/rtc-wm831x.c: remove unused period IRQ handler
...
|
|
Add support for mount options to restrict access to /proc/PID/
directories. The default backward-compatible "relaxed" behaviour is left
untouched.
The first mount option is called "hidepid" and its value defines how much
info about processes we want to be available for non-owners:
hidepid=0 (default) means the old behavior - anybody may read all
world-readable /proc/PID/* files.
hidepid=1 means users may not access any /proc/<pid>/ directories, but
their own. Sensitive files like cmdline, sched*, status are now protected
against other users. As permission checking done in proc_pid_permission()
and files' permissions are left untouched, programs expecting specific
files' modes are not confused.
hidepid=2 means hidepid=1 plus all /proc/PID/ will be invisible to other
users. It doesn't mean that it hides whether a process exists (it can be
learned by other means, e.g. by kill -0 $PID), but it hides process' euid
and egid. It compicates intruder's task of gathering info about running
processes, whether some daemon runs with elevated privileges, whether
another user runs some sensitive program, whether other users run any
program at all, etc.
gid=XXX defines a group that will be able to gather all processes' info
(as in hidepid=0 mode). This group should be used instead of putting
nonroot user in sudoers file or something. However, untrusted users (like
daemons, etc.) which are not supposed to monitor the tasks in the whole
system should not be added to the group.
hidepid=1 or higher is designed to restrict access to procfs files, which
might reveal some sensitive private information like precise keystrokes
timings:
http://www.openwall.com/lists/oss-security/2011/11/05/3
hidepid=1/2 doesn't break monitoring userspace tools. ps, top, pgrep, and
conky gracefully handle EPERM/ENOENT and behave as if the current user is
the only user running processes. pstree shows the process subtree which
contains "pstree" process.
Note: the patch doesn't deal with setuid/setgid issues of keeping
preopened descriptors of procfs files (like
https://lkml.org/lkml/2011/2/7/368). We rely on that the leaked
information like the scheduling counters of setuid apps doesn't threaten
anybody's privacy - only the user started the setuid program may read the
counters.
Signed-off-by: Vasiliy Kulikov <segoon@openwall.com>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Randy Dunlap <rdunlap@xenotime.net>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Greg KH <greg@kroah.com>
Cc: Theodore Tso <tytso@MIT.EDU>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Cc: James Morris <jmorris@namei.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Add support for procfs mount options. Actual mount options are coming in
the next patches.
Signed-off-by: Vasiliy Kulikov <segoon@openwall.com>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Randy Dunlap <rdunlap@xenotime.net>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Greg KH <greg@kroah.com>
Cc: Theodore Tso <tytso@MIT.EDU>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Cc: James Morris <jmorris@namei.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
This one behaves similarly to the /proc/<pid>/fd/ one - it contains
symlinks one for each mapping with file, the name of a symlink is
"vma->vm_start-vma->vm_end", the target is the file. Opening a symlink
results in a file that point exactly to the same inode as them vma's one.
For example the ls -l of some arbitrary /proc/<pid>/map_files/
| lr-x------ 1 root root 64 Aug 26 06:40 7f8f80403000-7f8f80404000 -> /lib64/libc-2.5.so
| lr-x------ 1 root root 64 Aug 26 06:40 7f8f8061e000-7f8f80620000 -> /lib64/libselinux.so.1
| lr-x------ 1 root root 64 Aug 26 06:40 7f8f80826000-7f8f80827000 -> /lib64/libacl.so.1.1.0
| lr-x------ 1 root root 64 Aug 26 06:40 7f8f80a2f000-7f8f80a30000 -> /lib64/librt-2.5.so
| lr-x------ 1 root root 64 Aug 26 06:40 7f8f80a30000-7f8f80a4c000 -> /lib64/ld-2.5.so
This *helps* checkpointing process in three ways:
1. When dumping a task mappings we do know exact file that is mapped
by particular region. We do this by opening
/proc/$pid/map_files/$address symlink the way we do with file
descriptors.
2. This also helps in determining which anonymous shared mappings are
shared with each other by comparing the inodes of them.
3. When restoring a set of processes in case two of them has a mapping
shared, we map the memory by the 1st one and then open its
/proc/$pid/map_files/$address file and map it by the 2nd task.
Using /proc/$pid/maps for this is quite inconvenient since it brings
repeatable re-reading and reparsing for this text file which slows down
restore procedure significantly. Also as being pointed in (3) it is a way
easier to use top level shared mapping in children as
/proc/$pid/map_files/$address when needed.
[akpm@linux-foundation.org: coding-style fixes]
[gorcunov@openvz.org: make map_files depend on CHECKPOINT_RESTORE]
Signed-off-by: Pavel Emelyanov <xemul@parallels.com>
Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org>
Reviewed-by: Vasiliy Kulikov <segoon@openwall.com>
Reviewed-by: "Kirill A. Shutemov" <kirill@shutemov.name>
Cc: Tejun Heo <tj@kernel.org>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Al Viro <viro@ZenIV.linux.org.uk>
Cc: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Prepare the ground for the next "map_files" patch which needs a name of a
link file to analyse.
Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org>
Cc: Pavel Emelyanov <xemul@parallels.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Vasiliy Kulikov <segoon@openwall.com>
Cc: "Kirill A. Shutemov" <kirill@shutemov.name>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Al Viro <viro@ZenIV.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Nothing requires that we lock the filesystem until the root inode is
provided.
Also iget5_locked() triggers a warning because we are holding the
filesystem lock while allocating the inode, which result in a lockdep
suspicion that we have a lock inversion against the reclaim path:
[ 1986.896979] =================================
[ 1986.896990] [ INFO: inconsistent lock state ]
[ 1986.896997] 3.1.1-main #8
[ 1986.897001] ---------------------------------
[ 1986.897007] inconsistent {RECLAIM_FS-ON-W} -> {IN-RECLAIM_FS-W} usage.
[ 1986.897016] kswapd0/16 [HC0[0]:SC0[0]:HE1:SE1] takes:
[ 1986.897023] (&REISERFS_SB(s)->lock){+.+.?.}, at: [<c01f8bd4>] reiserfs_write_lock+0x20/0x2a
[ 1986.897044] {RECLAIM_FS-ON-W} state was registered at:
[ 1986.897050] [<c014a5b9>] mark_held_locks+0xae/0xd0
[ 1986.897060] [<c014aab3>] lockdep_trace_alloc+0x7d/0x91
[ 1986.897068] [<c0190ee0>] kmem_cache_alloc+0x1a/0x93
[ 1986.897078] [<c01e7728>] reiserfs_alloc_inode+0x13/0x3d
[ 1986.897088] [<c01a5b06>] alloc_inode+0x14/0x5f
[ 1986.897097] [<c01a5cb9>] iget5_locked+0x62/0x13a
[ 1986.897106] [<c01e99e0>] reiserfs_fill_super+0x410/0x8b9
[ 1986.897114] [<c01953da>] mount_bdev+0x10b/0x159
[ 1986.897123] [<c01e764d>] get_super_block+0x10/0x12
[ 1986.897131] [<c0195b38>] mount_fs+0x59/0x12d
[ 1986.897138] [<c01a80d1>] vfs_kern_mount+0x45/0x7a
[ 1986.897147] [<c01a83e3>] do_kern_mount+0x2f/0xb0
[ 1986.897155] [<c01a987a>] do_mount+0x5c2/0x612
[ 1986.897163] [<c01a9a72>] sys_mount+0x61/0x8f
[ 1986.897170] [<c044060c>] sysenter_do_call+0x12/0x32
[ 1986.897181] irq event stamp: 7509691
[ 1986.897186] hardirqs last enabled at (7509691): [<c0190f34>] kmem_cache_alloc+0x6e/0x93
[ 1986.897197] hardirqs last disabled at (7509690): [<c0190eea>] kmem_cache_alloc+0x24/0x93
[ 1986.897209] softirqs last enabled at (7508896): [<c01294bd>] __do_softirq+0xee/0xfd
[ 1986.897222] softirqs last disabled at (7508859): [<c01030ed>] do_softirq+0x50/0x9d
[ 1986.897234]
[ 1986.897235] other info that might help us debug this:
[ 1986.897242] Possible unsafe locking scenario:
[ 1986.897244]
[ 1986.897250] CPU0
[ 1986.897254] ----
[ 1986.897257] lock(&REISERFS_SB(s)->lock);
[ 1986.897265] <Interrupt>
[ 1986.897269] lock(&REISERFS_SB(s)->lock);
[ 1986.897276]
[ 1986.897277] *** DEADLOCK ***
[ 1986.897278]
[ 1986.897286] no locks held by kswapd0/16.
[ 1986.897291]
[ 1986.897292] stack backtrace:
[ 1986.897299] Pid: 16, comm: kswapd0 Not tainted 3.1.1-main #8
[ 1986.897306] Call Trace:
[ 1986.897314] [<c0439e76>] ? printk+0xf/0x11
[ 1986.897324] [<c01482d1>] print_usage_bug+0x20e/0x21a
[ 1986.897332] [<c01479b8>] ? print_irq_inversion_bug+0x172/0x172
[ 1986.897341] [<c014855c>] mark_lock+0x27f/0x483
[ 1986.897349] [<c0148d88>] __lock_acquire+0x628/0x1472
[ 1986.897358] [<c0149fae>] lock_acquire+0x47/0x5e
[ 1986.897366] [<c01f8bd4>] ? reiserfs_write_lock+0x20/0x2a
[ 1986.897384] [<c01f8bd4>] ? reiserfs_write_lock+0x20/0x2a
[ 1986.897397] [<c043b5ef>] mutex_lock_nested+0x35/0x26f
[ 1986.897409] [<c01f8bd4>] ? reiserfs_write_lock+0x20/0x2a
[ 1986.897421] [<c01f8bd4>] reiserfs_write_lock+0x20/0x2a
[ 1986.897433] [<c01e2edd>] map_block_for_writepage+0xc9/0x590
[ 1986.897448] [<c01b1706>] ? create_empty_buffers+0x33/0x8f
[ 1986.897461] [<c0121124>] ? get_parent_ip+0xb/0x31
[ 1986.897472] [<c043ef7f>] ? sub_preempt_count+0x81/0x8e
[ 1986.897485] [<c043cae0>] ? _raw_spin_unlock+0x27/0x3d
[ 1986.897496] [<c0121124>] ? get_parent_ip+0xb/0x31
[ 1986.897508] [<c01e355d>] reiserfs_writepage+0x1b9/0x3e7
[ 1986.897521] [<c0173b40>] ? clear_page_dirty_for_io+0xcb/0xde
[ 1986.897533] [<c014a6e3>] ? trace_hardirqs_on_caller+0x108/0x138
[ 1986.897546] [<c014a71e>] ? trace_hardirqs_on+0xb/0xd
[ 1986.897559] [<c0177b38>] shrink_page_list+0x34f/0x5e2
[ 1986.897572] [<c01780a7>] shrink_inactive_list+0x172/0x22c
[ 1986.897585] [<c0178464>] shrink_zone+0x303/0x3b1
[ 1986.897597] [<c043cae0>] ? _raw_spin_unlock+0x27/0x3d
[ 1986.897611] [<c01788c9>] kswapd+0x3b7/0x5f2
The deadlock shouldn't happen since we are doing that allocation in the
mount path, the filesystem is not available for any reclaim. Still the
warning is annoying.
To solve this, acquire the lock later only where we need it, right before
calling reiserfs_read_locked_inode() that wants to lock to walk the tree.
Reported-by: Knut Petersen <Knut_Petersen@t-online.de>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Jeff Mahoney <jeffm@suse.com>
Cc: Jan Kara <jack@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
journal_init() doesn't need the lock since no operation on the filesystem
is involved there. journal_read() and get_list_bitmap() have yet to be
reviewed carefully though before removing the lock there. Just keep the
it around these two calls for safety.
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Jeff Mahoney <jeffm@suse.com>
Cc: Jan Kara <jack@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
In the mount path, transactions that are made before journal
initialization don't involve the filesystem. We can delay the reiserfs
lock until we play with the journal.
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Jeff Mahoney <jeffm@suse.com>
Cc: Jan Kara <jack@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Signed-off-by: Davidlohr Bueso <dave@gnu.org>
Cc: Jan Kara <jack@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Randomization of PIE load address is hard coded in binfmt_elf.c for X86
and ARM. Create a new Kconfig variable
(CONFIG_ARCH_BINFMT_ELF_RANDOMIZE_PIE) for this and use it instead. Thus
architecture specific policy is pushed out of the generic binfmt_elf.c and
into the architecture Kconfig files.
X86 and ARM Kconfigs are modified to select the new variable so there is
no change in behavior. A follow on patch will select it for MIPS too.
Signed-off-by: David Daney <david.daney@cavium.com>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Acked-by: H. Peter Anvin <hpa@zytor.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
oom_score_adj is used for guarding processes from OOM-Killer. One of
problem is that it's inherited at fork(). When a daemon set oom_score_adj
and make children, it's hard to know where the value is set.
This patch adds some tracepoints useful for debugging. This patch adds
3 trace points.
- creating new task
- renaming a task (exec)
- set oom_score_adj
To debug, users need to enable some trace pointer. Maybe filtering is useful as
# EVENT=/sys/kernel/debug/tracing/events/task/
# echo "oom_score_adj != 0" > $EVENT/task_newtask/filter
# echo "oom_score_adj != 0" > $EVENT/task_rename/filter
# echo 1 > $EVENT/enable
# EVENT=/sys/kernel/debug/tracing/events/oom/
# echo 1 > $EVENT/enable
output will be like this.
# grep oom /sys/kernel/debug/tracing/trace
bash-7699 [007] d..3 5140.744510: oom_score_adj_update: pid=7699 comm=bash oom_score_adj=-1000
bash-7699 [007] ...1 5151.818022: task_newtask: pid=7729 comm=bash clone_flags=1200011 oom_score_adj=-1000
ls-7729 [003] ...2 5151.818504: task_rename: pid=7729 oldcomm=bash newcomm=ls oom_score_adj=-1000
bash-7699 [002] ...1 5175.701468: task_newtask: pid=7730 comm=bash clone_flags=1200011 oom_score_adj=-1000
grep-7730 [007] ...2 5175.701993: task_rename: pid=7730 oldcomm=bash newcomm=grep oom_score_adj=-1000
Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Acked-by: David Rientjes <rientjes@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Tell the page allocator that pages allocated for a buffered write are
expected to become dirty soon.
Signed-off-by: Johannes Weiner <jweiner@redhat.com>
Reviewed-by: Rik van Riel <riel@redhat.com>
Acked-by: Mel Gorman <mgorman@suse.de>
Cc: Minchan Kim <minchan.kim@gmail.com>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Wu Fengguang <fengguang.wu@intel.com>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Shaohua Li <shaohua.li@intel.com>
Cc: Chris Mason <chris.mason@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Inode cache pruning indirectly reclaims page-cache by invalidating mapping
pages. Let's account them into reclaim-state to notice this progress in
memory reclaimer.
Signed-off-by: Konstantin Khlebnikov <khlebnikov@openvz.org>
Cc: Dave Chinner <david@fromorbit.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4
Ext4 commits for 3.3 merge window
* tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: (32 commits)
ext4: fix undefined behavior in ext4_fill_flex_info()
ext4: make more symbols static
ext4: make local symbol ext4_initxattrs static
jbd2: fix hung processes in jbd2_journal_lock_updates()
ext4: reserve new feature flag codepoints
ext4: Report max_batch_time option correctly
ext4: add missing ext4_resize_end on error paths
ext4: let ext4_group_add() use common code
ext4: let ext4_group_extend() use common code
ext4: add new online resize interface
ext4: add a new function which adds a flex group to a fs
ext4: add a new function which allocates bitmaps and inode tables
ext4: pass verify_reserved_gdb() the number of group decriptors
ext4: add a function which updates the super block during online resizing
ext4: add a function which sets up a block group descriptors of a flex bg
ext4: add a function which sets up group blocks of a flex bg
ext4: add a structure which will be used by 64bit-resize interface
ext4: add a function which adds a new group descriptors to a fs
ext4: add a function which extends a group without checking parameters
ext4: use proper little-endian bitops
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ericvh/v9fs
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ericvh/v9fs:
fs/9p: iattr_valid flags are kernel internal flags map them to 9p values.
fs/9p: We should not allocate a new inode when creating hardlines.
fs/9p: v9fs_stat2inode should update suid/sgid bits.
9p: Reduce object size with CONFIG_NET_9P_DEBUG
fs/9p: check schedule_timeout_interruptible return value
Fix up trivial conflicts in fs/9p/{vfs_inode.c,vfs_inode_dotl.c} due to
debug messages having changed to use p9_debug() on one hand, and the
changes for umode_t on the other.
|
|
* 'nfs-for-3.3' of git://git.linux-nfs.org/projects/trondmy/linux-nfs:
NFSv4: Change the default setting of the nfs4_disable_idmapping parameter
NFSv4: Save the owner/group name string when doing open
NFS: Remove pNFS bloat from the generic write path
pnfs-obj: Must return layout on IO error
pnfs-obj: pNFS errors are communicated on iodata->pnfs_error
NFS: Cache state owners after files are closed
NFS: Clean up nfs4_find_state_owners_locked()
NFSv4: include bitmap in nfsv4 get acl data
nfs: fix a minor do_div portability issue
NFSv4.1: cleanup comment and debug printk
NFSv4.1: change nfs4_free_slot parameters for dynamic slots
NFSv4.1: cleanup init and reset of session slot tables
NFSv4.1: fix backchannel slotid off-by-one bug
nfs: fix regression in handling of context= option in NFSv4
NFS - fix recent breakage to NFS error handling.
NFS: Retry mounting NFSROOT
SUNRPC: Clean up the RPCSEC_GSS service ticket requests
|
|
* 'linux-next' of git://git.infradead.org/ubifs-2.6:
UBI: fix use-after-free on error path
UBI: fix missing scrub when there is a bit-flip
UBIFS: Use kmemdup rather than duplicating its implementation
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/teigland/linux-dlm
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/teigland/linux-dlm:
dlm: add recovery callbacks
dlm: add node slots and generation
dlm: move recovery barrier calls
dlm: convert rsb list to rb_tree
|
|
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
MTD pull for 3.3
* tag 'for-linus-3.3' of git://git.infradead.org/mtd-2.6: (113 commits)
mtd: Fix dependency for MTD_DOC200x
mtd: do not use mtd->block_markbad directly
logfs: do not use 'mtd->block_isbad' directly
mtd: introduce mtd_can_have_bb helper
mtd: do not use mtd->suspend and mtd->resume directly
mtd: do not use mtd->lock, unlock and is_locked directly
mtd: do not use mtd->sync directly
mtd: harmonize mtd_writev usage
mtd: do not use mtd->lock_user_prot_reg directly
mtd: mtd->write_user_prot_reg directly
mtd: do not use mtd->read_*_prot_reg directly
mtd: do not use mtd->get_*_prot_info directly
mtd: do not use mtd->read_oob directly
mtd: mtdoops: do not use mtd->panic_write directly
romfs: do not use mtd->get_unmapped_area directly
mtd: do not use mtd->get_unmapped_area directly
mtd: do use mtd->point directly
mtd: introduce mtd_has_oob helper
mtd: mtdcore: export symbols cleanup
mtd: clean-up the default_mtd_writev function
...
Fix up trivial edit/remove conflict in drivers/staging/spectra/lld_mtd.c
|
|
Kmemleak reports the following warning in bdev_cache_init()
[ 0.003738] kmemleak: Object 0xffff880153035200 (size 256):
[ 0.003823] kmemleak: comm "swapper/0", pid 0, jiffies 4294667299
[ 0.003909] kmemleak: min_count = 1
[ 0.003988] kmemleak: count = 0
[ 0.004066] kmemleak: flags = 0x1
[ 0.004144] kmemleak: checksum = 0
[ 0.004224] kmemleak: backtrace:
[ 0.004303] [<ffffffff814755ac>] kmemleak_alloc+0x21/0x3e
[ 0.004446] [<ffffffff811100ba>] kmem_cache_alloc+0xca/0x1dc
[ 0.004592] [<ffffffff811371b1>] alloc_vfsmnt+0x1f/0x198
[ 0.004736] [<ffffffff811375c5>] vfs_kern_mount+0x36/0xd2
[ 0.004879] [<ffffffff8113929a>] kern_mount_data+0x18/0x32
[ 0.005025] [<ffffffff81ab9075>] bdev_cache_init+0x51/0x81
[ 0.005169] [<ffffffff81ab8abf>] vfs_caches_init+0x101/0x10d
[ 0.005313] [<ffffffff81a9bae3>] start_kernel+0x344/0x383
[ 0.005456] [<ffffffff81a9b2a7>] x86_64_start_reservations+0xae/0xb2
[ 0.005602] [<ffffffff81a9b3ad>] x86_64_start_kernel+0x102/0x111
[ 0.005747] [<ffffffffffffffff>] 0xffffffffffffffff
[ 0.008653] kmemleak: Trying to color unknown object at 0xffff880153035220 as Grey
[ 0.008754] Pid: 0, comm: swapper/0 Not tainted 3.3.0-rc0-dbg-04200-g8180888-dirty #888
[ 0.008856] Call Trace:
[ 0.008934] [<ffffffff81118704>] ? find_and_get_object+0x44/0x118
[ 0.009023] [<ffffffff81118fe6>] paint_ptr+0x57/0x8f
[ 0.009109] [<ffffffff81475935>] kmemleak_not_leak+0x23/0x42
[ 0.009195] [<ffffffff81ab9096>] bdev_cache_init+0x72/0x81
[ 0.009282] [<ffffffff81ab8abf>] vfs_caches_init+0x101/0x10d
[ 0.009368] [<ffffffff81a9bae3>] start_kernel+0x344/0x383
[ 0.009466] [<ffffffff81a9b2a7>] x86_64_start_reservations+0xae/0xb2
[ 0.009555] [<ffffffff81a9b140>] ? early_idt_handlers+0x140/0x140
[ 0.009643] [<ffffffff81a9b3ad>] x86_64_start_kernel+0x102/0x111
due to attempt to mark pointer to `struct vfsmount' as a gray object, which
is embedded into `struct mount' returned from alloc_vfsmnt().
Make `bd_mnt' static, avoiding need to tell kmemleak to mark it gray, as
suggested by Al Viro.
Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Two (or more) concurrent calls of shrink_dcache_parent() on the same dentry may
cause shrink_dcache_parent() to loop forever.
Here's what appears to happen:
1 - CPU0: select_parent(P) finds C and puts it on dispose list, returns 1
2 - CPU1: select_parent(P) locks P->d_lock
3 - CPU0: shrink_dentry_list() locks C->d_lock
dentry_kill(C) tries to lock P->d_lock but fails, unlocks C->d_lock
4 - CPU1: select_parent(P) locks C->d_lock,
moves C from dispose list being processed on CPU0 to the new
dispose list, returns 1
5 - CPU0: shrink_dentry_list() finds dispose list empty, returns
6 - Goto 2 with CPU0 and CPU1 switched
Basically select_parent() steals the dentry from shrink_dentry_list() and thinks
it found a new one, causing shrink_dentry_list() to think it's making progress
and loop over and over.
One way to trigger this is to make udev calls stat() on the sysfs file while it
is going away.
Having a file in /lib/udev/rules.d/ with only this one rule seems to the trick:
ATTR{vendor}=="0x8086", ATTR{device}=="0x10ca", ENV{PCI_SLOT_NAME}="%k", ENV{MATCHADDR}="$attr{address}", RUN+="/bin/true"
Then execute the following loop:
while true; do
echo -bond0 > /sys/class/net/bonding_masters
echo +bond0 > /sys/class/net/bonding_masters
echo -bond1 > /sys/class/net/bonding_masters
echo +bond1 > /sys/class/net/bonding_masters
done
One fix would be to check all callers and prevent concurrent calls to
shrink_dcache_parent(). But I think a better solution is to stop the
stealing behavior.
This patch adds a new dentry flag that is set when the dentry is added to the
dispose list. The flag is cleared in dentry_lru_del() in case the dentry gets a
new reference just before being pruned.
If the dentry has this flag, select_parent() will skip it and let
shrink_dentry_list() retry pruning it. With select_parent() skipping those
dentries there will not be the appearance of progress (new dentries found) when
there is none, hence shrink_dcache_parent() will not loop forever.
Set the flag is also set in prune_dcache_sb() for consistency as suggested by
Linus.
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
CC: stable@vger.kernel.org
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Conflicts:
fs/ext4/ioctl.c
|
|
Commit 503358ae01b70ce6909d19dd01287093f6b6271c ("ext4: avoid divide by
zero when trying to mount a corrupted file system") fixes CVE-2009-4307
by performing a sanity check on s_log_groups_per_flex, since it can be
set to a bogus value by an attacker.
sbi->s_log_groups_per_flex = sbi->s_es->s_log_groups_per_flex;
groups_per_flex = 1 << sbi->s_log_groups_per_flex;
if (groups_per_flex < 2) { ... }
This patch fixes two potential issues in the previous commit.
1) The sanity check might only work on architectures like PowerPC.
On x86, 5 bits are used for the shifting amount. That means, given a
large s_log_groups_per_flex value like 36, groups_per_flex = 1 << 36
is essentially 1 << 4 = 16, rather than 0. This will bypass the check,
leaving s_log_groups_per_flex and groups_per_flex inconsistent.
2) The sanity check relies on undefined behavior, i.e., oversized shift.
A standard-confirming C compiler could rewrite the check in unexpected
ways. Consider the following equivalent form, assuming groups_per_flex
is unsigned for simplicity.
groups_per_flex = 1 << sbi->s_log_groups_per_flex;
if (groups_per_flex == 0 || groups_per_flex == 1) {
We compile the code snippet using Clang 3.0 and GCC 4.6. Clang will
completely optimize away the check groups_per_flex == 0, leaving the
patched code as vulnerable as the original. GCC keeps the check, but
there is no guarantee that future versions will do the same.
Signed-off-by: Xi Wang <xi.wang@gmail.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Cc: stable@vger.kernel.org
|
|
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
lookup should fail with ENOMEM, not silently make dentry negative.
Switched to saner calling conventions, while we are at it.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
