aboutsummaryrefslogtreecommitdiff
path: root/include/acpi
AgeCommit message (Collapse)Author
2012-12-13Merge tag 'for-3.8' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pciLinus Torvalds
Pull PCI update from Bjorn Helgaas: "Host bridge hotplug: - Untangle _PRT from struct pci_bus (Bjorn Helgaas) - Request _OSC control before scanning root bus (Taku Izumi) - Assign resources when adding host bridge (Yinghai Lu) - Remove root bus when removing host bridge (Yinghai Lu) - Remove _PRT during hot remove (Yinghai Lu) SRIOV - Add sysfs knobs to control numVFs (Don Dutile) Power management - Notify devices when power resource turned on (Huang Ying) Bug fixes - Work around broken _SEG on HP xw9300 (Bjorn Helgaas) - Keep runtime PM enabled for unbound PCI devices (Huang Ying) - Fix Optimus dual-GPU runtime D3 suspend issue (Dave Airlie) - Fix xen frontend shutdown issue (David Vrabel) - Work around PLX PCI 9050 BAR alignment erratum (Ian Abbott) Miscellaneous - Add GPL license for drivers/pci/ioapic (Andrew Cooks) - Add standard PCI-X, PCIe ASPM register #defines (Bjorn Helgaas) - NumaChip remote PCI support (Daniel Blueman) - Fix PCIe Link Capabilities Supported Link Speed definition (Jingoo Han) - Convert dev_printk() to dev_info(), etc (Joe Perches) - Add support for non PCI BAR ROM data (Matthew Garrett) - Add x86 support for host bridge translation offset (Mike Yoknis) - Report success only when every driver supports AER (Vijay Pandarathil)" Fix up trivial conflicts. * tag 'for-3.8' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (48 commits) PCI: Use phys_addr_t for physical ROM address x86/PCI: Add NumaChip remote PCI support ath9k: Use standard #defines for PCIe Capability ASPM fields iwlwifi: Use standard #defines for PCIe Capability ASPM fields iwlwifi: collapse wrapper for pcie_capability_read_word() iwlegacy: Use standard #defines for PCIe Capability ASPM fields iwlegacy: collapse wrapper for pcie_capability_read_word() cxgb3: Use standard #defines for PCIe Capability ASPM fields PCI: Add standard PCIe Capability Link ASPM field names PCI/portdrv: Use PCI Express Capability accessors PCI: Use standard PCIe Capability Link register field names x86: Use PCI setup data PCI: Add support for non-BAR ROMs PCI: Add pcibios_add_device EFI: Stash ROMs if they're not in the PCI BAR PCI: Add and use standard PCI-X Capability register names PCI/PM: Keep runtime PM enabled for unbound PCI devices xen-pcifront: Handle backend CLOSED without CLOSING PCI: SRIOV control and status via sysfs (documentation) PCI/AER: Report success only when every device has AER-aware driver ...
2012-11-29Merge branch 'acpi-general'Rafael J. Wysocki
* acpi-general: (38 commits) ACPI / thermal: _TMP and _CRT/_HOT/_PSV/_ACx dependency fix ACPI: drop unnecessary local variable from acpi_system_write_wakeup_device() ACPI: Fix logging when no pci_irq is allocated ACPI: Update Dock hotplug error messages ACPI: Update Container hotplug error messages ACPI: Update Memory hotplug error messages ACPI: Update CPU hotplug error messages ACPI: Add acpi_handle_<level>() interfaces ACPI: remove use of __devexit ACPI / PM: Add Sony Vaio VPCEB1S1E to nonvs blacklist. ACPI / battery: Correct battery capacity values on Thinkpads Revert "ACPI / x86: Add quirk for "CheckPoint P-20-00" to not use bridge _CRS_ info" ACPI: create _SUN sysfs file ACPI / memhotplug: bind the memory device when the driver is being loaded ACPI / memhotplug: don't allow to eject the memory device if it is being used ACPI / memhotplug: free memory device if acpi_memory_enable_device() failed ACPI / memhotplug: fix memory leak when memory device is unbound from acpi_memhotplug ACPI / memhotplug: deal with eject request in hotplug queue ACPI / memory-hotplug: add memory offline code to acpi_memory_device_remove() ACPI / memory-hotplug: call acpi_bus_trim() to remove memory device ... Conflicts: include/linux/acpi.h (two additions at the end of the same file)
2012-11-29Merge branch 'acpica'Rafael J. Wysocki
* acpica: (26 commits) ACPICA: Update version to 20121018 ACPICA: AcpiGetObjectInfo: Add support for ACPI 5 _SUB method ACPICA: Update for 64-bit generation of recent error message changes ACPICA: Fix externalize name to complete migration to ACPI_MOVE_NAME ACPICA: Add starting offset parameter to common dump buffer routine ACPICA: Deploy ACPI_MOVE_NAME across ACPICA source base ACPICA: Update support for ACPI 5 MPST table ACPICA: Enhance error reporting for invalid opcodes and bad ACPI_NAMEs ACPICA: Add ACPI_MOVE_NAME macro to optimize 4-byte ACPI_NAME copies ACPICA: AcpiExec: Improve algorithm for tracking memory leaks ACPICA: Add debug print message for mutex objects that are force-released ACPICA: Resource Mgr: Small fix for buffer size calculation ACPICA: Remove extra spaces after periods in the Intel license ACPICA: Remove extra spaces after periods within comments ACPICA: Update local C library module comments for ASCII table ACPICA: Fix for predefined name loop during ACPICA initialization ACPICA: Fix some typos in comments ACPICA: ACPICA core: Cleanup empty lines at file start and end ACPICA: Audit/update for ACPICA return macros and debug depth counter ACPICA: Fix unmerged acmacros.h divergences. ...
2012-11-27Merge branch 'acpi-dev-pm' into acpi-enumerationRafael J. Wysocki
Subsequent commits in this branch will depend on 'acpi-dev-pm' material.
2012-11-21ACPI / PM: Introduce os_accessible flag for power_stateAaron Lu
Currently we have valid flag to represent if this ACPI device power state is valid. A device power state is valid does not necessarily mean we, as OSPM, has a mean to put the device into that power state, e.g. D3 cold is always a valid power state for any ACPI device, but if there is no _PS3 or _PRx for this device, we can't really put that device into D3 cold power state. The same is true for D0 power state. So here comes the os_accessible flag, which is only set if the device has provided us the required means to put it into that power state, e.g. if we have _PS3 or _PRx, we can put the device into D3 cold state and thus, D3 cold power state's os_accessible flag will be set in this case. And a new wrapper inline function is added to be used to check if firmware has provided us a way to power off the device during runtime. Signed-off-by: Aaron Lu <aaron.lu@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2012-11-21ACPI / driver core: Introduce struct acpi_dev_node and related macrosRafael J. Wysocki
To avoid adding an ACPI handle pointer to struct device on architectures that don't use ACPI, or generally when CONFIG_ACPI is not set, in which cases that pointer is useless, define struct acpi_dev_node that will contain the handle pointer if CONFIG_ACPI is set and will be empty otherwise and use it to represent the ACPI device node field in struct device. In addition to that define macros for reading and setting the ACPI handle of a device that don't generate code when CONFIG_ACPI is unset. Modify the ACPI subsystem to use those macros instead of referring to the given device's ACPI handle directly. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-16ACPI: create _SUN sysfs fileYasuaki Ishimatsu
_SUN method provides the slot unique-ID in the ACPI namespace. And The value is written in Advanced Configuration and Power Interface Specification as follows: "The _SUN value is required to be unique among the slots ofthe same type. It is also recommended that this number match the slot number printed on the physical slot whenever possible." So if we can know the value, we can identify the physical position of the slot in the system. The patch creates "sun" file in sysfs for identifying physical position of the slot. Signed-off-by: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com> Reviewed-by: Toshi Kani <toshi.kani@hp.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2012-11-15ACPICA: Update version to 20121018Bob Moore
Version 20121018. Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Lv Zheng <lv.zheng@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2012-11-15ACPICA: AcpiGetObjectInfo: Add support for ACPI 5 _SUB methodBob Moore
Now calls _SUB in addition to the other ID methods: _HID, _CID, and _UID. Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Lv Zheng <lv.zheng@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2012-11-15ACPICA: Update support for ACPI 5 MPST tableBob Moore
Fixes some problems introduced by late changes to the table as it was added to the ACPI 5.0 specification. Both the table compiler and the disassembler and the main header support for the table. Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Lv Zheng <lv.zheng@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2012-11-15ACPICA: Add ACPI_MOVE_NAME macro to optimize 4-byte ACPI_NAME copiesBob Moore
Resolves to a 32-bit move for the normal case, strncpy on machines that do not support misaligned transfers. Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Lv Zheng <lv.zheng@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2012-11-15ACPICA: Remove extra spaces after periods in the Intel licenseBob Moore
For consistency with the rest of the source code. Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Lv Zheng <lv.zheng@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2012-11-15ACPICA: Remove extra spaces after periods within commentsBob Moore
This makes all comments consistent. Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Lv Zheng <lv.zheng@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2012-11-15ACPICA: ACPICA core: Cleanup empty lines at file start and endBob Moore
Maintenance for source code consistency. Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Lv Zheng <lv.zheng@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2012-11-15ACPICA: Fix indent caused divergences.Lv Zheng
New version of "indent" program will generate different outputs that will lead to the divergences between the Linux and the ACPICA. This patch fixes such divergences caused by the "indent" program. The version of the "indent" used for this patch is "GNU indent 2.2.11". This patch will not affect the generated vmlinux binary. This will decrease 581 lines of 20120913 divergence.diff. Signed-off-by: Robert Moore <robert.moore@intel.com> Signed-off-by: Lv Zheng <lv.zheng@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2012-11-15ACPICA: Fix AcpiSrc caused divergences.Lv Zheng
There are definitions that can been converted into new styles by the recent AcpiSrc while they remain the old styles in the Linux. This patch fixes those definitions that will be converted by the AcpiSrc. This patch will not affect the generated vmlinux binary. This will decrease 97 lines of 20120913 divergence.diff. Signed-off-by: Lv Zheng <lv.zheng@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2012-11-15ACPICA: Fix divergences of definition conflicts.Lv Zheng
There are conflicts in the "acpi_device_id*" definitions between the Linux and the ACPICA. The definitions of acpi_device_id* in ACPICA have been changed to the "acpi_pnp_device_id*". This patch changes the corresponding "acpica_device_id*" definitiions in the Linux. This patch will not affect the generated vmlinx binary. This will decrease 298 lines of 20120913 divergence.diff. Signed-off-by: Lv Zheng <lv.zheng@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2012-11-15ACPICA: Fix unmerged debugger divergences.Lv Zheng
Debugger improvements in ACPICA are always ignored by ACPICA Linux release. This will lead to divergences between Linux and ACPICA. This patch fixes such unmerged debugger updates. Following patches are included: 1. Fixed a couple compiler warnings for extra extern Wed, 14 Mar 2007 21:12:19 +0000 2. Cleanup for internal Reference Object. Wed, 27 Aug 2008 10:11:30 -0700 3. Debugger: Lock method args for multithread command. Fri, 24 Apr 2009 12:28:49 -0700 4. Debugger: Add max count argument for Batch command. Tue, 29 Sep 2009 12:31:58 -0700 5. Add new host interfaces for _OSI support. Thu, 5 Aug 2010 14:18:28 -0700 6. Increase debugger buffer size for method return objects. Wed, 17 Nov 2010 13:48:30 -0800 7. Debugger: Add command to display status of global handlers. Tue, 25 Jan 2011 13:47:58 -0800 8. Debugger: Split large dbcmds.c file. Wed, 26 Jan 2011 13:03:41 -0800 9. Debugger/AcpiExec: Add support to pass complex args to methods. Tue, 17 May 2011 13:33:39 -0700 10.Debugger: Add Template command to dump resource templates. Fri, 28 Oct 2011 14:18:51 -0700 11.Support for custom ACPICA build for ACPI 5.0 reduced hardware. Wed, 1 Feb 2012 13:18:17 -0800 12.Debugger: Improve command help support. Wed, 15 Feb 2012 07:59:26 -0800 13.Update ACPI_HW_DEPENDENT* macro invocations. Wed, 15 Feb 2012 08:14:08 -0800 14.Debugger: Rename function to simplify source code conversion. Wed, 13 Jun 2012 14:23:06 -0700 15.Debugger: Enhance "Tables" and "Unload" commands. Fri, 29 Jun 2012 13:10:58 -0700 16.Debugger: update prototype for AcpiDbSleep function. Fri, 17 Aug 2012 13:43:02 -0700 This patch will not affect the generated vmlinx binary. This will decrease 264 lines of 20120913 divergence.diff. Signed-off-by: Robert Moore <robert.moore@intel.com> Signed-off-by: Lv Zheng <lv.zheng@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2012-11-15driver core / ACPI: Move ACPI support to core device and driver typesMika Westerberg
With ACPI 5 we are starting to see devices that don't natively support discovery but can be enumerated with the help of the ACPI namespace. Typically, these devices can be represented in the Linux device driver model as platform devices or some serial bus devices, like SPI or I2C devices. Since we want to re-use existing drivers for those devices, we need a way for drivers to specify the ACPI IDs of supported devices, so that they can be matched against device nodes in the ACPI namespace. To this end, it is sufficient to add a pointer to an array of supported ACPI device IDs, that can be provided by the driver, to struct device. Moreover, things like ACPI power management need to have access to the ACPI handle of each supported device, because that handle is used to invoke AML methods associated with the corresponding ACPI device node. The ACPI handles of devices are now stored in the archdata member structure of struct device whose definition depends on the architecture and includes the ACPI handle only on x86 and ia64. Since the pointer to an array of supported ACPI IDs is added to struct device_driver in an architecture-independent way, it is logical to move the ACPI handle from archdata to struct device itself at the same time. This also makes code more straightforward in some places and follows the example of Device Trees that have a poiter to struct device_node in there too. This changeset is based on Mika Westerberg's work. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: H. Peter Anvin <hpa@zytor.com> Acked-by: Tony Luck <tony.luck@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2012-11-15ACPI: Remove unused lockable in acpi_device_flagsToshi Kani
Removed lockable in struct acpi_device_flags since it is no longer used by any code. acpi_bus_hot_remove_device() cannot use this flag because acpi_bus_trim() frees up its acpi_device object. Furthermore, the dock driver calls _LCK method without using this lockable flag. Signed-off-by: Toshi Kani <toshi.kani@hp.com> Reviewed-by: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2012-11-15ACPI / PM: Fix build problem related to acpi_target_system_state()David Rientjes
Commit b87b49cd0efd ("ACPI / PM: Move device PM functions related to sleep states") declared acpi_target_system_state() for CONFIG_PM_SLEEP whereas it is only defined for CONFIG_ACPI_SLEEP, resulting in the following link error: drivers/built-in.o: In function `acpi_pm_device_sleep_wake': drivers/acpi/device_pm.c:342: undefined reference to `acpi_target_system_state' drivers/built-in.o: In function `acpi_dev_suspend_late': drivers/acpi/device_pm.c:501: undefined reference to `acpi_target_system_state' drivers/built-in.o: In function `acpi_pm_device_sleep_state': drivers/acpi/device_pm.c:221: undefined reference to `acpi_target_system_state' Define it only for CONFIG_ACPI_SLEEP and fallback to a dummy definition for other configs. [rjw: The problem only occurs for exotic .configs in which HIBERNATE_CALLBACKS is selected by XEN_SAVE_RESTORE and neither SUSPEND nor HIBERNATION is set.] Signed-off-by: David Rientjes <rientjes@google.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2012-11-15ACPI / PM: Move device PM functions related to sleep statesRafael J. Wysocki
Introduce helper function returning the target sleep state of the system and use it to move the remaining device power management functions from sleep.c to device_pm.c. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2012-11-15ACPI / PM: Provide device PM functions operating on struct acpi_deviceRafael J. Wysocki
If the caller of acpi_bus_set_power() already has a pointer to the struct acpi_device object corresponding to the device in question, it doesn't make sense for it to go through acpi_bus_get_device(), which may be costly, because it involves acquiring the global ACPI namespace mutex. For this reason, export the function operating on struct acpi_device objects used internally by acpi_bus_set_power(), so that it may be called instead of acpi_bus_set_power() in the above case, and change its name to acpi_device_set_power(). Additionally, introduce two inline wrappers for checking ACPI PM capabilities of devices represented by struct acpi_device objects. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2012-11-15ACPI / PM: Split device wakeup management routinesRafael J. Wysocki
Two device wakeup management routines in device_pm.c and sleep.c, acpi_pm_device_run_wake() and acpi_pm_device_sleep_wake(), take a device pointer argument and use it to obtain the ACPI handle of the corresponding ACPI namespace node. That handle is then used to get the address of the struct acpi_device object corresponding to the struct device passed as the argument. Unfortunately, that last operation may be costly, because it involves taking the global ACPI namespace mutex, so it shouldn't be carried out too often. However, the callers of those routines usually call them in a row with acpi_pm_device_sleep_state() which also takes that mutex for the same reason, so it would be more efficient if they ran acpi_bus_get_device() themselves to obtain a pointer to the struct acpi_device object in question and then passed that pointer to the appropriate PM routines. To make that possible, split each of the PM routines mentioned above in two parts, one taking a struct acpi_device pointer argument and the other implementing the current interface for compatibility. Additionally, change acpi_pm_device_run_wake() to actually return an error code if there is an error while setting up runtime remote wakeup for the device. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2012-11-15ACPI / PM: Move device power state selection routine to device_pm.cRafael J. Wysocki
The ACPI function for choosing device power state is now located in drivers/acpi/sleep.c, but drivers/acpi/device_pm.c is a more logical place for it, so move it there. However, instead of moving the function entirely, move its core only under a different name and with a different list of arguments, so that it is more flexible, and leave a wrapper around it in the original location. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2012-11-15ACPI / PM: Move routines for adding/removing device wakeup notifiersRafael J. Wysocki
ACPI routines for adding and removing device wakeup notifiers are currently defined in a PCI-specific file, but they will be necessary for non-PCI devices too, so move them to a separate file under drivers/acpi and rename them to indicate their ACPI origins. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2012-11-15ACPI / PM: Fix device PM kernedoc comments and #ifdefsRafael J. Wysocki
The kerneldoc comments for acpi_pm_device_sleep_state(), acpi_pm_device_run_wake(), and acpi_pm_device_sleep_wake() are outdated or otherwise inaccurate and/or don't follow the common kerneldoc patterns, so fix them. Additionally, notice that acpi_pm_device_run_wake() should be under CONFIG_PM_RUNTIME rather than under CONFIG_PM_SLEEP, so fix that too. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2012-11-05ACPI: Pass segment/bus to _PRT add/del so they don't depend on pci_busBjorn Helgaas
This effectively reverts 859a3f86ca8 ("ACPI: simplify acpi_pci_irq_add_prt() API") and d9efae3688a ("ACPI: simplify acpi_pci_irq_del_prt() API"). The reason is to disentangle these routines from the struct pci_bus. We want to be able to add the _PRT before the struct pci_bus exists, and delete the _PRT after we've removed the pci_bus. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Taku Izumi <izumi.taku@jp.fujitsu.com>
2012-10-08Merge branch 'release' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux Pul ACPI & Power Management updates from Len Brown: - acpidump utility added - intel_idle driver now supports IVB Xeon - turbostat utility can now count SMIs - ACPI can now bind to USB3 hubs - misc fixes * 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux: (49 commits) ACPI: Add new sysfs interface to export device description ACPI: Harden acpi_table_parse_entries() against BIOS bug tools/power/turbostat: add option to count SMIs, re-name some options tools/power turbostat: add [-d MSR#][-D MSR#] options to print counter deltas intel_idle: enable IVB Xeon support tools/power turbostat: add [-m MSR#] option tools/power turbostat: make -M output pretty tools/power turbostat: print more turbo-limit information tools/power turbostat: delete unused line tools/power turbostat: run on IVB Xeon tools/power/acpi/acpidump: create acpidump(8), local make install targets tools/power/acpi/acpidump: version 20101221 - find dynamic tables in sysfs ACPI: run _OSC after ACPI_FULL_INITIALIZATION tools/power/acpi/acpidump: create acpidump(8), local make install targets tools/power/acpi/acpidump: version 20101221 - find dynamic tables in sysfs tools/power/acpi/acpidump: version 20071116 tools/power/acpi/acpidump: version 20070714 tools/power/acpi/acpidump: version 20060606 tools/power/acpi/acpidump: version 20051111 xo15-ebook: convert to module_acpi_driver() ...
2012-10-06Merge branches 'acpica', 'acpidump', 'intel-idle', 'misc', ↵Len Brown
'module_acpi_driver-simplify', 'turbostat' and 'usb3' into release add acpidump utility intel_idle driver now supports IVB Xeon turbostat can now count SMIs ACPI can now bind to USB3 hubs misc fixes
2012-10-06ACPI: Add new sysfs interface to export device descriptionLance Ortiz
Add support to export the device description obtained from the ACPI _STR method, if one exists for a device, to user-space via a sysfs interface. This new interface provides a standard and platform neutral way for users to obtain the description text stored in the ACPI _STR method. If no _STR method exists for the device, no sysfs 'description' file will be created. The 'description' file will be located in the /sys/devices/ directory using the device's path. /sys/device/<bus>/<bridge path>/<device path>.../firmware_node/description Example: /sys/devices/pci0000:00/0000:00.07.0/0000:0e:00.0/firmware_node/description It can also be located using the ACPI device path, for example: /sys/devices/LNXSYSTM:00/device:00/ACPI0004:00/PNP0A08:00/device:13/device:15/description /sys/devices/LNXSYSTM:00/device:00/ACPI0004:00/ACPI0004:01/ACPI0007:02/description Execute the 'cat' command on the 'description' file to obtain the description string for that device. This patch also includes documentation describing how the new sysfs interface works Changes from v1-v2 based on comments by Len Brown and Fengguang Wu * Removed output "No Description" and leaving a NULL attribute if the _STR method failed to evaluate. * In acpi_device_remove_files() removed the redundent check of dev->pnp.str_obj before calling free. This check triggered a message from smatch. Signed-off-by: Lance Ortiz <lance.ortiz@hp.com> Signed-off-by: Len Brown <len.brown@intel.com>
2012-10-03Merge tag 'uapi-prep-20121002' of ↵Linus Torvalds
git://git.infradead.org/users/dhowells/linux-headers Pull preparatory patches for user API disintegration from David Howells: "The patches herein prepare for the extraction of the Userspace API bits from the various header files named in the Kbuild files. New subdirectories are created under either include/uapi/ or arch/x/include/uapi/ that correspond to the subdirectory containing that file under include/ or arch/x/include/. The new subdirs under the uapi/ directory are populated with Kbuild files that mostly do nothing at this time. Further patches will disintegrate the headers in each original directory and fill in the Kbuild files as they do it. These patches also: (1) fix up #inclusions of "foo.h" rather than <foo.h>. (2) Remove some redundant #includes from the DRM code. (3) Make the kernel build infrastructure handle Kbuild files both in the old places and the new UAPI place that both specify headers to be exported. (4) Fix some kernel tools that #include kernel headers during their build. I have compile tested this with allyesconfig against x86_64, allmodconfig against i386 and a scattering of additional defconfigs of other arches. Prepared for main script Signed-off-by: David Howells <dhowells@redhat.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Michael Kerrisk <mtk.manpages@gmail.com> Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Acked-by: Dave Jones <davej@redhat.com> Acked-by: H. Peter Anvin <hpa@zytor.com>" * tag 'uapi-prep-20121002' of git://git.infradead.org/users/dhowells/linux-headers: UAPI: Plumb the UAPI Kbuilds into the user header installation and checking UAPI: x86: Differentiate the generated UAPI and internal headers UAPI: Remove the objhdr-y export list UAPI: Move linux/version.h UAPI: Set up uapi/asm/Kbuild.asm UAPI: x86: Fix insn_sanity build failure after UAPI split UAPI: x86: Fix the test_get_len tool UAPI: (Scripted) Set up UAPI Kbuild files UAPI: Partition the header include path sets and add uapi/ header directories UAPI: (Scripted) Convert #include "..." to #include <path/...> in kernel system headers UAPI: (Scripted) Convert #include "..." to #include <path/...> in drivers/gpu/ UAPI: (Scripted) Remove redundant DRM UAPI header #inclusions from drivers/gpu/. UAPI: Refer to the DRM UAPI headers with <...> and from certain headers only
2012-10-02UAPI: (Scripted) Convert #include "..." to #include <path/...> in kernel ↵David Howells
system headers Convert #include "..." to #include <path/...> in kernel system headers. Signed-off-by: David Howells <dhowells@redhat.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Acked-by: Dave Jones <davej@redhat.com>
2012-09-21ACPI: introduce module_acpi_driver() helper macroMika Westerberg
Add a helper macro module_acpi_driver() which reduces the boilerplate code for ACPI drivers. This is similar what is done for other busses (PCI, SPI, I2C etc). Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2012-09-21ACPI: Allow ACPI binding with USB-3.0 hubLan Tianyu
A USB port's position and connectability can't be identified on some boards via USB hub registers. ACPI _UPC and _PLD can help to resolve this issue and so it is necessary to bind USB with ACPI. This patch is to allow ACPI binding with USB-3.0 hub. Current ACPI only can bind one struct-device to one ACPI device node. This can not work with USB-3.0 hub, because the USB-3.0 hub has two logical devices. Each works for USB-2.0 and USB-3.0 devices. In the Linux USB subsystem, those two logical hubs are treated as two seperate devices that have two struct devices. But in the ACPI DSDT, these two logical hubs share one ACPI device node. So there is a requirement to bind multi struct-devices to one ACPI device node. This patch is to resolve such problem. Following is the ACPI device nodes' description under xhci hcd. Device (XHC) Device (RHUB) Device (HSP1) Device (HSP2) Device (HSP3) Device (HSP4) Device (SSP1) Device (SSP2) Device (SSP3) Device (SSP4) Topology in the Linux device XHC USB-2.0 logical hub USB-3.0 logical hub HSP1 SSP1 HSP2 SSP2 HSP3 SSP3 HSP4 SSP4 This patch also modifies the output of /proc/acpi/wakeup. One ACPI node can be associated with multiple devices: XHC S4 *enabled pci:0000:00:14.0 RHUB S0 disabled usb:usb1 disabled usb:usb2 Signed-off-by: Lan Tianyu <tianyu.lan@intel.com> Acked-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2012-09-21ACPICA: Update version to 20120913Bob Moore
Version 20120913. Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Lv Zheng <lv.zheng@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2012-09-21ACPICA: Headers: Add new ACPI 5 HEST notify type values.Bob Moore
Add values 5 (CMCI) and 6 (MCE). Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Lv Zheng <lv.zheng@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2012-09-21ACPI: Use ACPICA native way to decode the PLD bufferFeng Tang
This patch is on top of the ACPICA 20120816 release, which implemented a native way to decode PLD buffer, so use it instead of leting upper level users do the decoding. v2: Modify the check for PLD buffer length to reject buffers whose length < 16 Signed-off-by: Feng Tang <feng.tang@intel.com> Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2012-09-21ACPICA: Update version to 20120816.Bob Moore
Version 20120816. Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Feng Tang <feng.tang@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2012-09-21ACPICA: Add struct header support for _FDE, _GRT, _GTM, and _SRT names.Bob Moore
Added structs for the buffers related to these predefined names, in acbuffer.h Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Feng Tang <feng.tang@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2012-09-21ACPICA: Add support for complex _PLD buffers.Bob Moore
_PLD (Physical Location of Device) returns a bit-packed buffer that is difficult to parse. This change adds a new interface, AcpiDecodePldBuffer that parses the buffer into a more usable local struct. Also adds macros to both get and set individual fields within the packed _PLD buffer. Adds a new include file, acbuffer.h - which will be expanded to add structs for other ACPI names that return buffers. ACPICA BZ 954. Emit (in comments) the decoded contents of a static _PLD buffer in order to improve comprehension of this bit-packed buffer. Add multi-endian support to the _PLD decode routine. Deploy the multi-endian macros to extract data from the _PLD buffer. Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Feng Tang <feng.tang@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2012-09-21ACPICA: Headers: Add support for CSRT and DBG2 ACPI tables.Bob Moore
These tables are defined outside of the ACPI specification. Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Feng Tang <feng.tang@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2012-09-21ACPICA: Comment update: Fix some typos in actble.hBob Moore
No functional change. Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Feng Tang <feng.tang@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2012-09-21ACPI: delelte more BFS/GTS related definition and codeFeng Tang
This is a follow on for commmit 3f6f49c7 "ACPI: delete _GTS/_BFS support" to do more cleanup. Signed-off-by: Feng Tang <feng.tang@intel.com> Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2012-09-17cpuidle / ACPI : move cpuidle_device field out of the acpi_processor_power ↵Daniel Lezcano
structure Currently we have the cpuidle_device field in the acpi_processor_power structure. This adds a dependency between processor.h and cpuidle.h Although it is not a real problem, removing this dependency has the benefit of separating a bit more the cpuidle code from the rest of the acpi code. Also, the compilation should be a bit improved because we do no longer include cpuidle.h in processor.h. The preprocessor was generating 30418 loc and with this patch it generates 30256 loc for processor_thermal.c, a file which is not concerned at all by cpuidle, like processor_perflib.c and processor_throttling.c. That may sound ridiculous, but "small streams make big rivers" :P This patch moves this field into a static global per cpu variable like what is done in the intel_idle driver. Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2012-09-15ACPI / processor: remove unused function parameterDaniel Lezcano
The 'device' parameter is not used neither in acpi_processor_power_init and acpi_processor_power_exit. This patch removes it. Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2012-09-05cpuidle / ACPI : remove power from acpi_processor_cx structureDaniel Lezcano
Remove the unused power field from struct struct acpi_processor_cx. [rjw: Modified changelog.] Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Acked-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2012-08-03Merge branches 'delete-gts-bfs', 'misc', 'novell-bugzilla-757888-numa' and ↵Len Brown
'osc-pcie' into base
2012-07-30ACPI: delete _GTS/_BFS supportLen Brown
_GTS and _BFS were added to the suspend/resume flow in the ACPI 2.0 specification. Linux dutifully implemented _GTS and _BFS. We discovered that it was rarely seen in systems in the field. Further, some of those systems had AML so bogus that it could never work -- proof that no other operating system supports _GTS and _BFS. So we made _GTS and _BFS optional via modparam, and disabled them by default. But we've had to complicate some code to keep this support in the kernel, as these methods are defined to be evaluated very close to sleep entry and exit. Indeed, no other AML is ever evaluated with interrupts off. We have submitted a proposal for _GTS and _BFS to be officially removed from the ACPI specification on the next revision. Here we remove it from Linux. Signed-off-by: Len Brown <len.brown@intel.com> Acked-by: Ingo Molnar <mingo@kernel.org> Acked-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2012-07-26Merge branch 'release' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux Pull ACPI & power management update from Len Brown: "Re-write of the turbostat tool. lower overhead was necessary for measuring very large system when they are very idle. IVB support in intel_idle It's what I run on my IVB, others should be able to also:-) ACPICA core update We have found some bugs due to divergence between Linux and the upstream ACPICA base. Most of these patches are to reduce that divergence to reduce the risk of future bugs. Some cpuidle updates, mostly for non-Intel More will be coming, as they depend on this part. Some thermal management changes needed by non-ACPI systems. Some _OST (OS Status Indication) updates for hot ACPI hot-plug." * 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux: (51 commits) Thermal: Documentation update Thermal: Add Hysteresis attributes Thermal: Make Thermal trip points writeable ACPI/AC: prevent OOPS on some boxes due to missing check power_supply_register() return value check tools/power: turbostat: fix large c1% issue tools/power: turbostat v2 - re-write for efficiency ACPICA: Update to version 20120711 ACPICA: AcpiSrc: Fix some translation issues for Linux conversion ACPICA: Update header files copyrights to 2012 ACPICA: Add new ACPI table load/unload external interfaces ACPICA: Split file: tbxface.c -> tbxfload.c ACPICA: Add PCC address space to space ID decode function ACPICA: Fix some comment fields ACPICA: Table manager: deploy new firmware error/warning interfaces ACPICA: Add new interfaces for BIOS(firmware) errors and warnings ACPICA: Split exception code utilities to a new file, utexcep.c ACPI: acpi_pad: tune round_robin_time ACPICA: Update to version 20120620 ACPICA: Add support for implicit notify on multiple devices ACPICA: Update comments; no functional change ...