aboutsummaryrefslogtreecommitdiff
path: root/include/scsi
AgeCommit message (Collapse)Author
2013-05-10Merge branch 'postmerge' into for-linusJames Bottomley
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-05-10Merge branch 'misc' into for-linusJames Bottomley
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-05-10[SCSI] iscsi class, qla4xxx: fix sess/conn refcounting when find fns are usedMike Christie
This fixes a bug where the iscsi class/driver did not do a put_device when a sess/conn device was found. This also simplifies the interface by not having to pass in some arguments that were duplicated and did not need to be exported. Reported-by: Zhao Hongjiang <zhaohongjiang@huawei.com> Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Acked-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-05-10[SCSI] sas: unify the pointlessly separated enums sas_dev_type and ↵James Bottomley
sas_device_type These enums have been separate since the dawn of SAS, mainly because the latter is a procotol only enum and the former includes additional state for libsas. The dichotomy causes endless confusion about which one you should use where and leads to pointless warnings like this: drivers/scsi/mvsas/mv_sas.c: In function 'mvs_update_phyinfo': drivers/scsi/mvsas/mv_sas.c:1162:34: warning: comparison between 'enum sas_device_type' and 'enum sas_dev_type' [-Wenum-compare] Fix by eliminating one of them. The one kept is effectively the sas.h one, but call it sas_device_type and make sure the enums are all properly namespaced with the SAS_ prefix. Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-05-06[SCSI] sd: use REQ_PM in sd's runtime suspend operationLin Ming
With the introduction of REQ_PM, modify sd's runtime suspend operation functions to use that flag so that the operations to put the device into runtime suspended state(i.e. sync cache and stop device) will not affect its runtime PM status. Signed-off-by: Lin Ming <ming.m.lin@intel.com> Signed-off-by: Aaron Lu <aaron.lu@intel.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-05-02[SCSI] libosd: remover duplicate __bitwise annotationDan Carpenter
__be32 is already a __bitwise type so we don't need the second __bitwise here. It causes a Sparse error: include/scsi/osd_protocol.h:110:26: error: invalid modifier Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Benny Halevy <bhalevy@tonian.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-05-01Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull VFS updates from Al Viro, Misc cleanups all over the place, mainly wrt /proc interfaces (switch create_proc_entry to proc_create(), get rid of the deprecated create_proc_read_entry() in favor of using proc_create_data() and seq_file etc). 7kloc removed. * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (204 commits) don't bother with deferred freeing of fdtables proc: Move non-public stuff from linux/proc_fs.h to fs/proc/internal.h proc: Make the PROC_I() and PDE() macros internal to procfs proc: Supply a function to remove a proc entry by PDE take cgroup_open() and cpuset_open() to fs/proc/base.c ppc: Clean up scanlog ppc: Clean up rtas_flash driver somewhat hostap: proc: Use remove_proc_subtree() drm: proc: Use remove_proc_subtree() drm: proc: Use minor->index to label things, not PDE->name drm: Constify drm_proc_list[] zoran: Don't print proc_dir_entry data in debug reiserfs: Don't access the proc_dir_entry in r_open(), r_start() r_show() proc: Supply an accessor for getting the data from a PDE's parent airo: Use remove_proc_subtree() rtl8192u: Don't need to save device proc dir PDE rtl8187se: Use a dir under /proc/net/r8180/ proc: Add proc_mkdir_data() proc: Move some bits from linux/proc_fs.h to linux/{of.h,signal.h,tty.h} proc: Move PDE_NET() to fs/proc/proc_net.c ...
2013-04-30Merge branch 'akpm' (incoming from Andrew)Linus Torvalds
Merge third batch of fixes from Andrew Morton: "Most of the rest. I still have two large patchsets against AIO and IPC, but they're a bit stuck behind other trees and I'm about to vanish for six days. - random fixlets - inotify - more of the MM queue - show_stack() cleanups - DMI update - kthread/workqueue things - compat cleanups - epoll udpates - binfmt updates - nilfs2 - hfs - hfsplus - ptrace - kmod - coredump - kexec - rbtree - pids - pidns - pps - semaphore tweaks - some w1 patches - relay updates - core Kconfig changes - sysrq tweaks" * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (109 commits) Documentation/sysrq: fix inconstistent help message of sysrq key ethernet/emac/sysrq: fix inconstistent help message of sysrq key sparc/sysrq: fix inconstistent help message of sysrq key powerpc/xmon/sysrq: fix inconstistent help message of sysrq key ARM/etm/sysrq: fix inconstistent help message of sysrq key power/sysrq: fix inconstistent help message of sysrq key kgdb/sysrq: fix inconstistent help message of sysrq key lib/decompress.c: fix initconst notifier-error-inject: fix module names in Kconfig kernel/sys.c: make prctl(PR_SET_MM) generally available UAPI: remove empty Kbuild files menuconfig: print more info for symbol without prompts init/Kconfig: re-order CONFIG_EXPERT options to fix menuconfig display kconfig menu: move Virtualization drivers near other virtualization options Kconfig: consolidate CONFIG_DEBUG_STRICT_USER_COPY_CHECKS relay: use macro PAGE_ALIGN instead of FIX_SIZE kernel/relay.c: move FIX_SIZE macro into relay.c kernel/relay.c: remove unused function argument actor drivers/w1/slaves/w1_ds2760.c: fix the error handling in w1_ds2760_add_slave() drivers/w1/slaves/w1_ds2781.c: fix the error handling in w1_ds2781_add_slave() ...
2013-04-30UAPI: remove empty Kbuild filesDavid Howells
Remove empty Kbuild files as they cause problems with the patch program which removes files that become empty. Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-04-11[SCSI] scsi_transport_iscsi: Declare portal type string macros for generic useAdheer Chandravanshi
Signed-off-by: Adheer Chandravanshi <adheer.chandravanshi@qlogic.com> Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com> Reviewed-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-04-11[SCSI] libiscsi: export function iscsi_switch_str_paramAdheer Chandravanshi
Signed-off-by: Adheer Chandravanshi <adheer.chandravanshi@qlogic.com> Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-04-11[SCSI] scsi_transport_iscsi: Add flash node mgmt supportAdheer Chandravanshi
This patch allows iscsiadm to manage iSCSI target information stored on adapter flash on per host basis. The sysfs entries will look as cited below: /sys/bus/iscsi_flashnode/devices/flashnode_sess-<host_no>:<flashnode_id>/<session attrs> /sys/bus/iscsi_flashnode/devices/flashnode_conn-<host_no>:<flashnode_id>:<conn_id>/<conn attrs> Signed-off-by: Adheer Chandravanshi <adheer.chandravanshi@qlogic.com> Signed-off-by: Manish Rangankar <manish.rangankar@qlogic.com> Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-04-09scsi: bury ->proc_info()Al Viro
all users converted to ->show_info()/->write_info() Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-04-09scsi: saner replacements for ->proc_info()Al Viro
It's still an obsolete interface; don't introduce those in new drivers. However, it's saner than the ->proc_info() and commits after this one will convert the existing ->proc_info() users to it. The read side is ->show_info(seq_file *, struct Scsi_Host *); use seq_... for generating contents. The write side is ->write_info(struct Scsi_Host *, char *, int). Again, this is driven by procfs needs; we are going to kill ->write_proc() and ->read_proc() and this is the main obstacle to burying that piece of shit. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-03-25libfc, fcoe, bnx2fc: Split fc_disc_init into fc_disc_{init, config}Robert Love
Split discovery initialization in code that is setup once (fcoe_disc_init) and code that can be re-configured (fcoe_disc_config). Signed-off-by: Robert Love <robert.w.love@intel.com> Tested-by: Jack Morgan <jack.morgan@intel.com> Reviewed-by: Bhanu Prakash Gollapudi <bprakash@broadcom.com>
2013-03-25libfc, fcoe, bnx2fc: Always use fcoe_disc_init for discovery layer ↵Robert Love
initialization Currently libfcoe is doing some libfc discovery layer initialization outside of libfc. This patch moves this code into libfc and sets up a split in discovery (one time) initialization code and (re-configurable) settings that will come in the next patch. Signed-off-by: Robert Love <robert.w.love@intel.com> Tested-by: Jack Morgan <jack.morgan@intel.com> Reviewed-by: Bhanu Prakash Gollapudi <bprakash@broadcom.com>
2013-03-02Merge tag 'scsi-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi Pull SCSI updates from James Bottomley: "This is an assorted set of stragglers into the merge window with driver updates for qla2xxx, megaraid_sas, storvsc and ufs. It also includes pulls of the uapi tree (all the remaining SCSI pieces) and the fcoe tree (updates to fcoe and libfc)" * tag 'scsi-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (81 commits) [SCSI] ufs: Separate PCI code into glue driver [SCSI] ufs: Segregate PCI Specific Code [SCSI] scsi: fix lpfc build when wmb() is defined as mb() [SCSI] storvsc: Handle dynamic resizing of the device [SCSI] storvsc: Restructure error handling code on command completion [SCSI] storvsc: avoid usage of WRITE_SAME [SCSI] aacraid: suppress two GCC warnings [SCSI] hpsa: check for dma_mapping_error in hpsa_passthru ioctls [SCSI] hpsa: reorganize error handling in hpsa_passthru_ioctl [SCSI] hpsa: check for dma_mapping_error in hpsa_map_sg_chain_block [SCSI] hpsa: Check for dma_mapping_error for all code paths using fill_cmd [SCSI] hpsa: Check for dma_mapping_error in hpsa_map_one [SCSI] dc395x: uninitialized variable in device_alloc() [SCSI] Fix range check in scsi_host_dif_capable() [SCSI] storvsc: Initialize the sglist [SCSI] mpt2sas: Add support for OEM specific controller [SCSI] ipr: Fix oops while resetting an ipr adapter [SCSI] fnic: Fnic Trace Utility [SCSI] fnic: New debug flags and debug log messages [SCSI] fnic: fnic driver may hit BUG_ON on device reset ...
2013-03-01[SCSI] Merge tag 'fcoe-02-19-13' into for-linusJames Bottomley
FCoE Updates for 3.9 Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-03-01Merge tag 'uapi-20121219' into for-linusJames Bottomley
UAPI Disintegration 2012-12-19 This is the remaining SCSI part of the UAPI Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-02-24[SCSI] Fix range check in scsi_host_dif_capable()Martin K. Petersen
The range checking from fe542396 was bad. We would still end up walking beyond the array as Type 3 is defined to be 4 in the protection bitmask. Instead use ARRAY_SIZE() for the range check. Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-01-25[SCSI] remove can_power_off flag from scsi_deviceAaron Lu
Commit 166a2967b45ede2e2e56f3ede3cd32053dc17812 "libata: tell scsi layer device supports runtime power off" introduced the can_power_off flag for scsi_device and is used to support ZPODD implementation in SCSI layer. Since ZPODD is now implemented in ATA layer, that flag is no longer needed, so remove it. Signed-off-by: Aaron Lu <aaron.lu@intel.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2013-01-25[libata] scsi: no poll when ODD is powered offAaron Lu
When the ODD is powered off, any action the user did to the ODD that would generate a media event will trigger an ACPI interrupt, so the poll for media event is no longer necessary. And the poll will also cause a runtime status change, which will stop the ODD from staying in powered off state, so the poll should better be stopped. But since we don't have access to the gendisk structure in LLDs, here comes the disk_events_disable_depth for scsi device. This field is a hint set by LLDs to convey information to upper layer drivers. A value of 0 means media poll is necessary for the device, while values above 0 means media poll is not needed and should better be skipped. So we can increase its value when we are to power off the ODD in ATA layer and decrease its value when the ODD is powered on, effectively silence the media events poll. Signed-off-by: Aaron Lu <aaron.lu@intel.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2013-01-07UAPI: (Scripted) Disintegrate include/scsi/fcDavid Howells
Signed-off-by: David Howells <dhowells@redhat.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Michael Kerrisk <mtk.manpages@gmail.com> Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Acked-by: Dave Jones <davej@redhat.com>
2012-12-19UAPI: (Scripted) Disintegrate include/scsiDavid Howells
Signed-off-by: David Howells <dhowells@redhat.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Michael Kerrisk <mtk.manpages@gmail.com> Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Acked-by: Dave Jones <davej@redhat.com>
2012-12-14libfcoe, fcoe: consolidate the fcoe_ctlr_get_lesb/fcoe_get_lesbYi Zou
Similarly they can be moved into libfcoe instead of being private to fcoe now. Also add comments particularly on the term LESB to the corresponding function. Signed-off-by: Yi Zou <yi.zou@intel.com> Cc: Bhanu Prakash Gollapudi <bprakash@broadcom.com> Tested-by: Marcus Dennis <marcusx.e.dennis@intel.com> Signed-off-by: Robert Love <robert.w.love@intel.com>
2012-12-14libfcoe, fcoe: move fcoe_link_speed_update() to libfcoe and export itYi Zou
With the previous patch, fcoe_link_speed_update() can be moved into libfcoe and exported to used by fcoe, bnx2fc, and etc. Signed-off-by: Yi Zou <yi.zou@intel.com> Cc: Bhanu Prakash Gollapudi <bprakash@broadcom.com> Tested-by: Marcus Dennis <marcusx.e.dennis@intel.com> Signed-off-by: Robert Love <robert.w.love@intel.com>
2012-12-14fcoe: add support to the get_netdev() for fcoe_interfaceYi Zou
Adds support to fcoe_port's newly added get_netdev fucntion pointer. Signed-off-by: Yi Zou <yi.zou@intel.com> Cc: Bhanu Prakash Gollapudi <bprakash@broadcom.com> Tested-by: Marcus Dennis <marcusx.e.dennis@intel.com> Signed-off-by: Robert Love <robert.w.love@intel.com>
2012-12-14fcoe: prep work to start consolidate the usage of fcoe_netdevYi Zou
Currently, in the default kernel fcoe driver, it is needed to get to the underlying private per fcoe transport's private structure, e.g., fcoe_interface in fcoe.ko, and returns the associated netdev. The similar logic exists in other fcoe drivers, e.g., bnx2fc, so we add a function pointer into the common fcoe_port struct to allow individual fcoe transport implementaion (fcoe and bnx2fc) to get the corresponding netdev associated with a give lport. Then a inline fcoe_get_netdev() is added as part of libfcoe for all underlying fcoe transport drivers to use regardless of its individual fcoe transport driver, and also allows move more common code such as fcoe_link_speed_update or fcoe_ctlr_get_lesb to be in libfcoe, rather than specific to fcoe. This patch is a prep work that adds aforementioned fucntion pointer, and followed by the actual code changes to make use of it. Signed-off-by: Yi Zou <yi.zou@intel.com> Cc: Bhanu Prakash Gollapudi <bprakash@broadcom.com> Tested-by: Marcus Dennis <marcusx.e.dennis@intel.com> Signed-off-by: Robert Love <robert.w.love@intel.com>
2012-12-14libfcoe, fcoe, bnx2fc: Add new fcoe control interfaceRobert Love
This patch does a few things. 1) Makes /sys/bus/fcoe/ctlr_{create,destroy} interfaces. These interfaces take an <ifname> and will either create an FCoE Controller or destroy an FCoE Controller depending on which file is written to. The new FCoE Controller will start in a DISABLED state and will not do discovery or login until it is ENABLED. This pause will allow us to configure the FCoE Controller before enabling it. 2) Makes the 'mode' attribute of a fcoe_ctlr_device writale. This allows the user to configure the mode in which the FCoE Controller will start in when it is ENABLED. Possible modes are 'Fabric', or 'VN2VN'. The default mode for a fcoe_ctlr{,_device} is 'Fabric'. Drivers must implement the set_fcoe_ctlr_mode routine to support this feature. libfcoe offers an exported routine to set a FCoE Controller's mode. The mode can only be changed when the FCoE Controller is DISABLED. This patch also removes the get_fcoe_ctlr_mode pointer in the fcoe_sysfs function template, the code in fcoe_ctlr.c to get the mode and the assignment of the fcoe_sysfs function pointer to the fcoe_ctlr.c implementation (in fcoe and bnx2fc). fcoe_sysfs can return that value for the mode without consulting the LLD. 3) Make a 'enabled' attribute of a fcoe_ctlr_device. On a read, fcoe_sysfs will return the attribute's value. On a write, fcoe_sysfs will call the LLD (if there is a callback) to notifiy that the enalbed state has changed. This patch maintains the old FCoE control interfaces as module parameters, but it adds comments pointing out that the old interfaces are deprecated. Signed-off-by: Robert Love <robert.w.love@intel.com> Acked-by: Neil Horman <nhorman@tuxdriver.com>
2012-12-13Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds
Pull first round of SCSI updates from James Bottomley: "This patch set includes two large new drivers: mpt3sas (for the next gen fusion SAS hardware) and csiostor a FCoE offload driver for the Chelsio converged network cards (this includes some net changes which I've OK'd with DaveM). The rest of the patch is driver updates (qla2xxx, lpfc, hptiop, be2iscsi) plus a few assorted updates and bug fixes. We also have a Power Management rework in the Upper Layer Drivers preparatory to doing ACPI zero power optical devices, but the actual enabler is still being worked on. Signed-off-by: James Bottomley <JBottomley@Parallels.com>" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (72 commits) [SCSI] mpt3sas: add new driver supporting 12GB SAS [SCSI] scsi_transport_sas: add 12GB definitions for mpt3sas [SCSI] miscdevice: Adding support for MPT3SAS_MINOR(222) [SCSI] csiostor: remove unneeded memset() [SCSI] csiostor: Fix sparse warnings. [SCSI] qla2xxx: Display that driver is operating in legacy interrupt mode. [SCSI] qla2xxx: Dont clear drv active on iospace config failure. [SCSI] qla2xxx: Fix typo in qla2xxx driver. [SCSI] qla2xxx: Update ql2xextended_error_logging parameter description with new option. [SCSI] qla2xxx: Parameterize the link speed of hba rather than fcport. [SCSI] qla2xxx: Add 16Gb/s case to get port speed capability. [SCSI] qla2xxx: Move marking fcport online ahead of setting iiDMA speed. [SCSI] qla2xxx: Add acquiring of risc semaphore before doing ISP reset. [SCSI] qla2xxx: Ignore driver ack bit if corresponding presence bit is not set. [SCSI] qla2xxx: Fix typo in qla83xx_fw_dump function. [SCSI] qla2xxx: Add Gen3 PCIe speed 8GT/s to the log message. [SCSI] qla2xxx: Use correct Request-Q-Out register during bidirectional request processing [SCSI] qla2xxx: Move noisy Start scsi failed messages to verbose logging level. [SCSI] qla2xxx: Fix coccinelle warnings in qla2x00_relogin. [SCSI] qla2xxx: No fcport FC-4 type assignment in GA_NXT response. ...
2012-12-13Merge tag 'rdma-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband Pull infiniband upate from Roland Dreier: "First batch of InfiniBand/RDMA changes for the 3.8 merge window: - A good chunk of Bart Van Assche's SRP fixes - UAPI disintegration from David Howells - mlx4 support for "64-byte CQE" hardware feature from Or Gerlitz - Other miscellaneous fixes" Fix up trivial conflict in mellanox/mlx4 driver. * tag 'rdma-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband: (33 commits) RDMA/nes: Fix for crash when registering zero length MR for CQ RDMA/nes: Fix for terminate timer crash RDMA/nes: Fix for BUG_ON due to adding already-pending timer IB/srp: Allow SRP disconnect through sysfs srp_transport: Document sysfs attributes srp_transport: Simplify attribute initialization code srp_transport: Fix attribute registration IB/srp: Document sysfs attributes IB/srp: send disconnect request without waiting for CM timewait exit IB/srp: destroy and recreate QP and CQs when reconnecting IB/srp: Eliminate state SRP_TARGET_DEAD IB/srp: Introduce the helper function srp_remove_target() IB/srp: Suppress superfluous error messages IB/srp: Process all error completions IB/srp: Introduce srp_handle_qp_err() IB/srp: Simplify SCSI error handling IB/srp: Keep processing commands during host removal IB/srp: Eliminate state SRP_TARGET_CONNECTING IB/srp: Increase block layer timeout RDMA/cm: Change return value from find_gid_port() ...
2012-12-01[SCSI] scsi_transport_sas: add 12GB definitions for mpt3sasSreekanth Reddy
[jejb: split this core change into a separate patch] Signed-off-by: Sreekanth Reddy <Sreekanth.Reddy@lsi.com> Reviewed-by: Nagalakshmi Nandigama <Nagalakshmi.Nandigama@lsi.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-11-30IB/srp: Allow SRP disconnect through sysfsBart Van Assche
Make it possible to disconnect the IB RC connection used by the SRP protocol to communicate with a target. Have the SRP transport layer create a sysfs "delete" attribute for initiator drivers that support this functionality. Signed-off-by: Bart Van Assche <bvanassche@acm.org> Acked-by: David Dillow <dillowda@ornl.gov> Cc: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Cc: Robert Jennings <rcj@linux.vnet.ibm.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2012-11-27[SCSI] sd: Use SCSI read/write(16) with > 32-bit LBA drivesJason J. Herne
Force large capacity (> 0xFFFFFFFF blocks) drives to use READ/WRITE(16) instead of READ/WRITE(10). Some(most/all?) USB enclosures do not like READ(10) commands when a large capacity drive is installed. This issue was reported and discussed here: http://marc.info/?l=linux-usb&m=135247705222324 Signed-off-by: Jason J. Herne <hernejj@gmail.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-11-13[SCSI] sd: Implement support for WRITE SAMEMartin K. Petersen
Implement support for WRITE SAME(10) and WRITE SAME(16) in the SCSI disk driver. - We set the default maximum to 0xFFFF because there are several devices out there that only support two-byte block counts even with WRITE SAME(16). We only enable transfers bigger than 0xFFFF if the device explicitly reports MAXIMUM WRITE SAME LENGTH in the BLOCK LIMITS VPD. - max_write_same_blocks can be overriden per-device basis in sysfs. - The UNMAP discovery heuristics remain unchanged but the discard limits are tweaked to match the "real" WRITE SAME commands. - In the error handling logic we now distinguish between WRITE SAME with and without UNMAP set. The discovery process heuristics are: - If the device reports a SCSI level of SPC-3 or greater we'll issue READ SUPPORTED OPERATION CODES to find out whether WRITE SAME(16) is supported. If that's the case we will use it. - If the device supports the block limits VPD and reports a MAXIMUM WRITE SAME LENGTH bigger than 0xFFFF we will use WRITE SAME(16). - Otherwise we will use WRITE SAME(10) unless the target LBA is beyond 0xFFFFFFFF or the block count exceeds 0xFFFF. - no_write_same is set for ATA, FireWire and USB. Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Reviewed-by: Mike Snitzer <snitzer@redhat.com> Reviewed-by: Jeff Garzik <jgarzik@redhat.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-11-13[SCSI] Add a report opcode helperMartin K. Petersen
The REPORT SUPPORTED OPERATION CODES command can be used to query whether a given opcode is supported by a device. Add a helper function that allows us to look up commands. We only issue RSOC if the device reports compliance with SPC-3 or later. But to err on the side of caution we disable the command for ATA, FireWire and USB. Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Acked-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-10-13Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds
Pull misc SCSI updates from James Bottomley: "This is an assorted set of stragglers into the merge window with driver updates for megaraid_sas, lpfc, bfi and mvumi. It also includes some fairly major fixes for virtio-scsi (scatterlist init), scsi_debug (off by one error), storvsc (use after free) and qla2xxx (potential deadlock). Signed-off-by: James Bottomley <JBottomley@Parallels.com>" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (49 commits) [SCSI] storvsc: Account for in-transit packets in the RESET path [SCSI] qla2xxx: fix potential deadlock on ha->hardware_lock [SCSI] scsi_debug: Fix off-by-one bug when unmapping region [SCSI] Shorten the path length of scsi_cmd_to_driver() [SCSI] virtio-scsi: support online resizing of disks [SCSI] virtio-scsi: fix LUNs greater than 255 [SCSI] virtio-scsi: initialize scatterlist structure [SCSI] megaraid_sas: Version, Changelog, Copyright update [SCSI] megaraid_sas: Remove duplicate code [SCSI] megaraid_sas: Add SystemPD FastPath support [SCSI] megaraid_sas: Add array boundary check for SystemPD [SCSI] megaraid_sas: Load io_request DataLength in bytes [SCSI] megaraid_sas: Add module param for configurable MSI-X vector count [SCSI] megaraid_sas: Remove un-needed completion_lock spinlock calls [SCSI] lpfc 8.3.35: Update lpfc version for 8.3.35 driver release [SCSI] lpfc 8.3.35: Fixed not reporting logical link speed to SCSI midlayer when QoS not on [SCSI] lpfc 8.3.35: Fix error with fabric service parameters causing performance issues [SCSI] lpfc 8.3.35: Fixed SCSI host create showing wrong link speed on SLI3 HBA ports [SCSI] lpfc 8.3.35: Fixed not checking solicition in progress bit when verifying FCF record for use [SCSI] lpfc 8.3.35: Fixed messages for misconfigured port errors ...
2012-10-09[SCSI] Shorten the path length of scsi_cmd_to_driver()Li Zhong
This patch tries to shorten the path length of scsi_cmd_to_driver(). As only REQ_TYPE_BLOCK_PC commands can be submitted without a driver, so we could avoid the related NULL checking, as long as we make sure we don't use it for REQ_TYPE_BLOCK_PC type commands. Plus, this fixes a bug where you get different behaviors from REQ_TYPE_BLOCK_PC commands when a driver is and isn't attached. Signed-off-by: Li Zhong <zhong@linux.vnet.ibm.com> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-10-07[SCSI] libfc: fix lun reset failure bugs in fc_fcp_resp handling of FCP_RSP_INFOYi Zou
In LUN RESET testing involving NetApp targets, it is observed that LUN RESET is failing. The fc_fcp_resp() is not completing the completion for the LUN RESET task since fc_fcp_resp assumes that the FCP_RSP_INFO is 8 bytes with the 4 byte reserved field, where in case of NetApp targets the FCP_RSP to LUN RESET only has 4 bytes of FCP_RSP_INFO. This leads fc_fcp_resp to error out w/o completing the task completion, eventually causing LUN RESET to be escalated to host reset, which is not very nice. Per FCP-3 r04, clause 9.5.15 and Table 23, the FCP_RSP_INFO field can be either 4 bytes or 8 bytes, with the last 4 bytes as "Reserved (if any)". Therefore it is valid to have 4 bytes FCP_RSP_INFO like some of the NetApp targets behave. Fixing this by validating the FCP_RSP_INFO against both the two spec allowed length. Reported-by: Frank Zhang <frank_1.zhang@intel.com> Signed-off-by: Yi Zou <yi.zou@intel.com> Tested-by: Ross Brattain <ross.b.brattain@intel.com> Signed-off-by: Robert Love <robert.w.love@intel.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-10-07[SCSI] fcoe: Fix write errors on NPIV portsNeerav Parikh
SCSI errors were generated while writing to LUNs connected via NPIV ports. Debugging this it was found that the FCoE packets transmitted via the NPIV ports were not tagged with correct user priority as negotiated with peer by DCB agent. This resulted in FCoE traffic going with priority zero(0) that did not have priority flow control (PFC) enabled for it. The initiator after transferring data to the target never saw any reply indicating the transfer was complete. This resulted in error recovery (ABTS) and SCSI command retries by the scsi-mid layer; eventually resulting in I/O errors. This patch fixes this issue by keeping the FCoE user priority information in the fcoe_interface instance that is common for both the physical port as well as NPIV ports connected to that physical port; instead of storing it in fcoe_port structure that has a per port instance. Signed-off-by: Neerav Parikh <Neerav.Parikh@intel.com> Acked-by: Yi Zou <yi.zou@intel.com> Acked-by: John Fastabend <john.r.fastabend@intel.com> Tested-by: Marcus Dennis <marcusx.e.dennis@intel.com> Signed-off-by: Robert Love <robert.w.love@intel.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-10-03Merge tag 'uapi-prep-20121002' of ↵Linus Torvalds
git://git.infradead.org/users/dhowells/linux-headers Pull preparatory patches for user API disintegration from David Howells: "The patches herein prepare for the extraction of the Userspace API bits from the various header files named in the Kbuild files. New subdirectories are created under either include/uapi/ or arch/x/include/uapi/ that correspond to the subdirectory containing that file under include/ or arch/x/include/. The new subdirs under the uapi/ directory are populated with Kbuild files that mostly do nothing at this time. Further patches will disintegrate the headers in each original directory and fill in the Kbuild files as they do it. These patches also: (1) fix up #inclusions of "foo.h" rather than <foo.h>. (2) Remove some redundant #includes from the DRM code. (3) Make the kernel build infrastructure handle Kbuild files both in the old places and the new UAPI place that both specify headers to be exported. (4) Fix some kernel tools that #include kernel headers during their build. I have compile tested this with allyesconfig against x86_64, allmodconfig against i386 and a scattering of additional defconfigs of other arches. Prepared for main script Signed-off-by: David Howells <dhowells@redhat.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Michael Kerrisk <mtk.manpages@gmail.com> Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Acked-by: Dave Jones <davej@redhat.com> Acked-by: H. Peter Anvin <hpa@zytor.com>" * tag 'uapi-prep-20121002' of git://git.infradead.org/users/dhowells/linux-headers: UAPI: Plumb the UAPI Kbuilds into the user header installation and checking UAPI: x86: Differentiate the generated UAPI and internal headers UAPI: Remove the objhdr-y export list UAPI: Move linux/version.h UAPI: Set up uapi/asm/Kbuild.asm UAPI: x86: Fix insn_sanity build failure after UAPI split UAPI: x86: Fix the test_get_len tool UAPI: (Scripted) Set up UAPI Kbuild files UAPI: Partition the header include path sets and add uapi/ header directories UAPI: (Scripted) Convert #include "..." to #include <path/...> in kernel system headers UAPI: (Scripted) Convert #include "..." to #include <path/...> in drivers/gpu/ UAPI: (Scripted) Remove redundant DRM UAPI header #inclusions from drivers/gpu/. UAPI: Refer to the DRM UAPI headers with <...> and from certain headers only
2012-10-02Merge tag 'scsi-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi Pull first round of SCSI updates from James Bottomley: "This is a large set of updates, mostly for drivers (qla2xxx [including support for new 83xx based card], qla4xxx, mpt2sas, bfa, zfcp, hpsa, be2iscsi, isci, lpfc, ipr, ibmvfc, ibmvscsi, megaraid_sas). There's also a rework for tape adding virtually unlimited numbers of tape drives plus a set of dif fixes for sd and a fix for a live lock on hot remove of SCSI devices. This round includes a signed tag pull of isci-for-3.6 Signed-off-by: James Bottomley <JBottomley@Parallels.com>" Fix up trivial conflict in drivers/scsi/qla2xxx/qla_nx.c due to new PCI helper function use in a function that was removed by this pull. * tag 'scsi-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (198 commits) [SCSI] st: remove st_mutex [SCSI] sd: Ensure we correctly disable devices with unknown protection type [SCSI] hpsa: gen8plus Smart Array IDs [SCSI] qla4xxx: Update driver version to 5.03.00-k1 [SCSI] qla4xxx: Disable generating pause frames for ISP83XX [SCSI] qla4xxx: Fix double clearing of risc_intr for ISP83XX [SCSI] qla4xxx: IDC implementation for Loopback [SCSI] qla4xxx: update copyrights in LICENSE.qla4xxx [SCSI] qla4xxx: Fix panic while rmmod [SCSI] qla4xxx: Fail probe_adapter if IRQ allocation fails [SCSI] qla4xxx: Prevent MSI/MSI-X falling back to INTx for ISP82XX [SCSI] qla4xxx: Update idc reg in case of PCI AER [SCSI] qla4xxx: Fix double IDC locking in qla4_8xxx_error_recovery [SCSI] qla4xxx: Clear interrupt while unloading driver for ISP83XX [SCSI] qla4xxx: Print correct IDC version [SCSI] qla4xxx: Added new mbox cmd to pass driver version to FW [SCSI] scsi_dh_alua: Enable STPG for unavailable ports [SCSI] scsi_remove_target: fix softlockup regression on hot remove [SCSI] ibmvscsi: Fix host config length field overflow [SCSI] ibmvscsi: Remove backend abstraction ...
2012-10-02UAPI: (Scripted) Convert #include "..." to #include <path/...> in kernel ↵David Howells
system headers Convert #include "..." to #include <path/...> in kernel system headers. Signed-off-by: David Howells <dhowells@redhat.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Acked-by: Dave Jones <davej@redhat.com>
2012-09-24[SCSI] sd: Ensure we correctly disable devices with unknown protection typeMartin K. Petersen
We set the capacity to zero when we discovered a device formatted with an unknown DIF protection type. However, the read_capacity code would override the capacity and cause the device to be enabled regardless. Make sd_read_protection_type() return an error if the protection type is unknown. Also prevent duplicate printk lines when the device is being revalidated. Reported-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-09-24[SCSI] fc-transport: Remove unnecessary includeRobert Love
This header file is included in user space applications that are doing "FC Passthrough." This include causes them to also include scsi/scsi.h. Since this header file doesn't actually need scsi/scsi.h, remove the include line. This patch was tested with 'make allyesconfig'. Signed-off-by: Robert Love <robert.w.love@intel.com> Tested-by: Ross Brattain <ross.b.brattain@intel.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-09-24[SCSI] Disable DIF on Hitachi Ultrastar 15K300Martin K. Petersen
Hitachi Ultrastar 15K300 is quirky. Disable T10 PI (DIF). Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-09-13scsi_netlink: Remove dead and buggy codeEric W. Biederman
The scsi netlink code confuses the netlink port id with a process id, going so far as to read NETLINK_CREDS(skb)->pid instead of the correct NETLINK_CB(skb).pid. Fortunately it does not matter because nothing registers to respond to scsi netlink requests. The only interesting use of the scsi_netlink interface is fc_host_post_vendor_event which sends a netlink multicast message. Since nothing registers to handle scsi netlink messages kill all of the registration logic, while retaining the same error handling behavior preserving the userspace visible behavior and removing all of the confused code that thought a netlink port id was a process id. This was tested with a kernel allyesconfig build which had no problems. Cc: James Bottomley <James.Bottomley@parallels.com> Cc: James Smart <James.Smart@Emulex.Com> Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-08-24[SCSI] libsas: suspend / resume supportDan Williams
libsas power management routines to suspend and recover the sas domain based on a model where the lldd is allowed and expected to be "forgetful". sas_suspend_ha - disable event processing allowing the lldd to take down links without concern for causing hotplug events. Regardless of whether the lldd actually posts link down messages libsas notifies the lldd that all domain_devices are gone. sas_prep_resume_ha - on the way back up before the lldd starts link training clean out any spurious events that were generated on the way down, and re-enable event processing sas_resume_ha - after the lldd has started and decided that all phys have posted link-up events this routine is called to let libsas start it's own timeout of any phys that did not resume. After the timeout an lldd can cancel the phy teardown by posting a link-up event. Storage for ex_change_count (u16) and phy_change_count (u8) are changed to int so they can be set to -1 to indicate 'invalidated'. Signed-off-by: Dan Williams <dan.j.williams@intel.com> Reviewed-by: Jacek Danecki <jacek.danecki@intel.com> Tested-by: Maciej Patelczyk <maciej.patelczyk@intel.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-07-25Merge branch 'master' [vanilla Linus master] into libata-dev.git/upstreamJeff Garzik
Two bits were appended to the end of the bitfield list in struct scsi_device. Resolve that conflict by including both bits. Conflicts: include/scsi/scsi_device.h
2012-07-20[SCSI] cleanup usages of scsi_complete_async_scansDan Williams
Now that scsi registers its async scan work with the async subsystem, wait_for_device_probe() is sufficient for ensuring all scanning is complete. [jejb: fix merge problems with eea03c20ae38 Make wait_for_device_probe() also do scsi_complete_async_scans()] Signed-off-by: Dan Williams <dan.j.williams@intel.com> Tested-by: Eldad Zack <eldad@fogrefinery.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>