| Age | Commit message (Collapse) | Author |
|---|
|
This helps performance on moderately dense random reads on SSD.
Transaction-Per-Second numbers provided by Taobao:
QPS case
-------------------------------------------------------
7536 disable context readahead totally
w/ patch: 7129 slower size rampup and start RA on the 3rd read
6717 slower size rampup
w/o patch: 5581 unmodified context readahead
Before, readahead will be started whenever reading page N+1 when it happen
to read N recently. After patch, we'll only start readahead when *three*
random reads happen to access pages N, N+1, N+2. The probability of this
happening is extremely low for pure random reads, unless they are very
dense, which actually deserves some readahead.
Also start with a smaller readahead window. The impact to interleaved
sequential reads should be small, because for a long run stream, the the
small readahead window rampup phase is negletable.
The context readahead actually benefits clustered random reads on HDD
whose seek cost is pretty high. However as SSD is increasingly used for
random read workloads it's better for the context readahead to concentrate
on interleaved sequential reads.
Another SSD rand read test from Miao
# file size: 2GB
# read IO amount: 625MB
sysbench --test=fileio \
--max-requests=10000 \
--num-threads=1 \
--file-num=1 \
--file-block-size=64K \
--file-test-mode=rndrd \
--file-fsync-freq=0 \
--file-fsync-end=off run
shows the performance of btrfs grows up from 69MB/s to 121MB/s, ext4 from
104MB/s to 121MB/s.
Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>
Tested-by: Tao Ma <tm@tao.ma>
Tested-by: Miao Xie <miaox@cn.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Currently there is no way to truncate partial page where the end
truncate point is not at the end of the page. This is because it was not
needed and the functionality was enough for file system truncate
operation to work properly. However more file systems now support punch
hole feature and it can benefit from mm supporting truncating page just
up to the certain point.
Specifically, with this functionality truncate_inode_pages_range() can
be changed so it supports truncating partial page at the end of the
range (currently it will BUG_ON() if 'end' is not at the end of the
page).
This commit changes the invalidatepage() address space operation
prototype to accept range to be invalidated and update all the instances
for it.
We also change the block_invalidatepage() in the same way and actually
make a use of the new length argument implementing range invalidation.
Actual file system implementations will follow except the file systems
where the changes are really simple and should not change the behaviour
in any way .Implementation for truncate_page_range() which will be able
to accept page unaligned ranges will follow as well.
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Hugh Dickins <hughd@google.com>
|
|
... and convert a bunch of SYSCALL_DEFINE ones to SYSCALL_DEFINE<n>,
killing the boilerplate crap around them.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
It is better to define readahead(2) in mm/readahead.c than in
mm/filemap.c.
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Cc: Fengguang Wu <fengguang.wu@intel.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
The files changed within are only using the EXPORT_SYMBOL
macro variants. They are not using core modular infrastructure
and hence don't need module.h but only the export.h header.
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
|
|
Pass __GFP_NORETRY|__GFP_NOWARN for readahead page allocations.
readahead page allocations are completely optional. They are OK to fail
and in particular shall not trigger OOM on themselves.
Reported-by: Dave Young <hidave.darkstar@gmail.com>
Reviewed-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>
Reviewed-by: Minchan Kim <minchan.kim@gmail.com>
Reviewed-by: Pekka Enberg <penberg@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
|
|
Code has been converted over to the new explicit on-stack plugging,
and delay users have been converted to use the new API for that.
So lets kill off the old plugging along with aops->sync_page().
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
|
|
Fix a wrong comment over page_cache_async_readahead().
Signed-off-by: Huang Shijie <shijie8@gmail.com>
Acked-by: Wu Fengguang <fengguang.wu@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
btrfs relocate_file_extent_cluster() calls us with NULL filp:
[ 4005.426805] BUG: unable to handle kernel NULL pointer dereference at 00000021
[ 4005.426818] IP: [<c109a130>] page_cache_sync_readahead+0x18/0x3e
Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>
Cc: Yan Zheng <yanzheng@21cn.com>
Reported-by: Kirill A. Shutemov <kirill@shutemov.name>
Tested-by: Kirill A. Shutemov <kirill@shutemov.name>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
implicit slab.h inclusion from percpu.h
percpu.h is included by sched.h and module.h and thus ends up being
included when building most .c files. percpu.h includes slab.h which
in turn includes gfp.h making everything defined by the two files
universally available and complicating inclusion dependencies.
percpu.h -> slab.h dependency is about to be removed. Prepare for
this change by updating users of gfp and slab facilities include those
headers directly instead of assuming availability. As this conversion
needs to touch large number of source files, the following script is
used as the basis of conversion.
http://userweb.kernel.org/~tj/misc/slabh-sweep.py
The script does the followings.
* Scan files for gfp and slab usages and update includes such that
only the necessary includes are there. ie. if only gfp is used,
gfp.h, if slab is used, slab.h.
* When the script inserts a new include, it looks at the include
blocks and try to put the new include such that its order conforms
to its surrounding. It's put in the include block which contains
core kernel includes, in the same order that the rest are ordered -
alphabetical, Christmas tree, rev-Xmas-tree or at the end if there
doesn't seem to be any matching order.
* If the script can't find a place to put a new include (mostly
because the file doesn't have fitting include block), it prints out
an error message indicating which .h file needs to be added to the
file.
The conversion was done in the following steps.
1. The initial automatic conversion of all .c files updated slightly
over 4000 files, deleting around 700 includes and adding ~480 gfp.h
and ~3000 slab.h inclusions. The script emitted errors for ~400
files.
2. Each error was manually checked. Some didn't need the inclusion,
some needed manual addition while adding it to implementation .h or
embedding .c file was more appropriate for others. This step added
inclusions to around 150 files.
3. The script was run again and the output was compared to the edits
from #2 to make sure no file was left behind.
4. Several build tests were done and a couple of problems were fixed.
e.g. lib/decompress_*.c used malloc/free() wrappers around slab
APIs requiring slab.h to be added manually.
5. The script was run on all .h files but without automatically
editing them as sprinkling gfp.h and slab.h inclusions around .h
files could easily lead to inclusion dependency hell. Most gfp.h
inclusion directives were ignored as stuff from gfp.h was usually
wildly available and often used in preprocessor macros. Each
slab.h inclusion directive was examined and added manually as
necessary.
6. percpu.h was updated not to include slab.h.
7. Build test were done on the following configurations and failures
were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my
distributed build env didn't work with gcov compiles) and a few
more options had to be turned off depending on archs to make things
build (like ipr on powerpc/64 which failed due to missing writeq).
* x86 and x86_64 UP and SMP allmodconfig and a custom test config.
* powerpc and powerpc64 SMP allmodconfig
* sparc and sparc64 SMP allmodconfig
* ia64 SMP allmodconfig
* s390 SMP allmodconfig
* alpha SMP allmodconfig
* um on x86_64 SMP allmodconfig
8. percpu.h modifications were reverted so that it could be applied as
a separate patch and serve as bisection point.
Given the fact that I had only a couple of failures from tests on step
6, I'm fairly confident about the coverage of this conversion patch.
If there is a breakage, it's likely to be something in one of the arch
headers which should be easily discoverable easily on most builds of
the specific arch.
Signed-off-by: Tejun Heo <tj@kernel.org>
Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
|
|
This fixes inefficient page-by-page reads on POSIX_FADV_RANDOM.
POSIX_FADV_RANDOM used to set ra_pages=0, which leads to poor performance:
a 16K read will be carried out in 4 _sync_ 1-page reads.
In other places, ra_pages==0 means
- it's ramfs/tmpfs/hugetlbfs/sysfs/configfs
- some IO error happened
where multi-page read IO won't help or should be avoided.
POSIX_FADV_RANDOM actually want a different semantics: to disable the
*heuristic* readahead algorithm, and to use a dumb one which faithfully
submit read IO for whatever application requests.
So introduce a flag FMODE_RANDOM for POSIX_FADV_RANDOM.
Note that the random hint is not likely to help random reads performance
noticeably. And it may be too permissive on huge request size (its IO
size is not limited by read_ahead_kb).
In Quentin's report (http://lkml.org/lkml/2009/12/24/145), the overall
(NFS read) performance of the application increased by 313%!
Tested-by: Quentin Barnes <qbarnes+nfs@yahoo-inc.com>
Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>
Cc: Nick Piggin <npiggin@suse.de>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Steven Whitehouse <swhiteho@redhat.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Trond Myklebust <Trond.Myklebust@netapp.com>
Cc: Chuck Lever <chuck.lever@oracle.com>
Cc: <stable@kernel.org> [2.6.33.x]
Cc: <qbarnes+nfs@yahoo-inc.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
I added blk_run_backing_dev on page_cache_async_readahead so readahead I/O
is unpluged to improve throughput on especially RAID environment.
The normal case is, if page N become uptodate at time T(N), then T(N) <=
T(N+1) holds. With RAID (and NFS to some degree), there is no strict
ordering, the data arrival time depends on runtime status of individual
disks, which breaks that formula. So in do_generic_file_read(), just
after submitting the async readahead IO request, the current page may well
be uptodate, so the page won't be locked, and the block device won't be
implicitly unplugged:
if (PageReadahead(page))
page_cache_async_readahead()
if (!PageUptodate(page))
goto page_not_up_to_date;
//...
page_not_up_to_date:
lock_page_killable(page);
Therefore explicit unplugging can help.
Following is the test result with dd.
#dd if=testdir/testfile of=/dev/null bs=16384
-2.6.30-rc6
1048576+0 records in
1048576+0 records out
17179869184 bytes (17 GB) copied, 224.182 seconds, 76.6 MB/s
-2.6.30-rc6-patched
1048576+0 records in
1048576+0 records out
17179869184 bytes (17 GB) copied, 206.465 seconds, 83.2 MB/s
(7Disks RAID-0 Array)
-2.6.30-rc6
1054976+0 records in
1054976+0 records out
17284726784 bytes (17 GB) copied, 212.233 seconds, 81.4 MB/s
-2.6.30-rc6-patched
1054976+0 records out
17284726784 bytes (17 GB) copied, 198.878 seconds, 86.9 MB/s
(7Disks RAID-5 Array)
The patch was found to improve performance with the SCST scsi target
driver. See
http://sourceforge.net/mailarchive/forum.php?thread_name=a0272b440906030714g67eabc5k8f847fb1e538cc62%40mail.gmail.com&forum_name=scst-devel
[akpm@linux-foundation.org: unbust comment layout]
[akpm@linux-foundation.org: "fix" CONFIG_BLOCK=n]
Signed-off-by: Hisashi Hifumi <hifumi.hisashi@oss.ntt.co.jp>
Acked-by: Wu Fengguang <fengguang.wu@intel.com>
Cc: Jens Axboe <jens.axboe@oracle.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Tested-by: Ronald <intercommit@gmail.com>
Cc: Bart Van Assche <bart.vanassche@gmail.com>
Cc: Vladislav Bolkhovitin <vst@vlnb.net>
Cc: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Introduce page cache context based readahead algorithm.
This is to better support concurrent read streams in general.
RATIONALE
---------
The current readahead algorithm detects interleaved reads in a _passive_ way.
Given a sequence of interleaved streams 1,1001,2,1002,3,4,1003,5,1004,1005,6,...
By checking for (offset == prev_offset + 1), it will discover the sequentialness
between 3,4 and between 1004,1005, and start doing sequential readahead for the
individual streams since page 4 and page 1005.
The context readahead algorithm guarantees to discover the sequentialness no
matter how the streams are interleaved. For the above example, it will start
sequential readahead since page 2 and 1002.
The trick is to poke for page @offset-1 in the page cache when it has no other
clues on the sequentialness of request @offset: if the current requenst belongs
to a sequential stream, that stream must have accessed page @offset-1 recently,
and the page will still be cached now. So if page @offset-1 is there, we can
take request @offset as a sequential access.
BENEFICIARIES
-------------
- strictly interleaved reads i.e. 1,1001,2,1002,3,1003,...
the current readahead will take them as silly random reads;
the context readahead will take them as two sequential streams.
- cooperative IO processes i.e. NFS and SCST
They create a thread pool, farming off (sequential) IO requests to different
threads which will be performing interleaved IO.
It was not easy(or possible) to reliably tell from file->f_ra all those
cooperative processes working on the same sequential stream, since they will
have different file->f_ra instances. And NFSD's file->f_ra is particularly
unusable, since their file objects are dynamically created for each request.
The nfsd does have code trying to restore the f_ra bits, but not satisfactory.
The new scheme is to detect the sequential pattern via looking up the page
cache, which provides one single and consistent view of the pages recently
accessed. That makes sequential detection for cooperative processes possible.
USER REPORT
-----------
Vladislav recommends the addition of context readahead as a result of his SCST
benchmarks. It leads to 6%~40% performance gains in various cases and achieves
equal performance in others. http://lkml.org/lkml/2009/3/19/239
OVERHEADS
---------
In theory, it introduces one extra page cache lookup per random read. However
the below benchmark shows context readahead to be slightly faster, wondering..
Randomly reading 200MB amount of data on a sparse file, repeat 20 times for
each block size. The average throughputs are:
original ra context ra gain
4K random reads: 65.561MB/s 65.648MB/s +0.1%
16K random reads: 124.767MB/s 124.951MB/s +0.1%
64K random reads: 162.123MB/s 162.278MB/s +0.1%
Cc: Jens Axboe <jens.axboe@oracle.com>
Cc: Jeff Moyer <jmoyer@redhat.com>
Tested-by: Vladislav Bolkhovitin <vst@vlnb.net>
Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Split all readahead cases, and move the random one to bottom.
No behavior changes.
This is to prepare for the introduction of context readahead, and make it
easy for inserting accounting/tracing points for each case.
Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>
Cc: Vladislav Bolkhovitin <vst@vlnb.net>
Cc: Jens Axboe <jens.axboe@oracle.com>
Cc: Jeff Moyer <jmoyer@redhat.com>
Cc: Nick Piggin <nickpiggin@yahoo.com.au>
Cc: Ying Han <yinghan@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Mmap read-around now shares the same code style and data structure with
readahead code.
This also removes do_page_cache_readahead(). Its last user, mmap
read-around, has been changed to call ra_submit().
The no-readahead-if-congested logic is dumped by the way. Users will be
pretty sensitive about the slow loading of executables. So it's
unfavorable to disabled mmap read-around on a congested queue.
[akpm@linux-foundation.org: coding-style fixes]
Cc: Nick Piggin <npiggin@suse.de>
Signed-off-by: Fengguang Wu <wfg@mail.ustc.edu.cn>
Cc: Ying Han <yinghan@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
The readahead call scheme is error-prone in that it expects the call sites
to check for async readahead after doing a sync one. I.e.
if (!page)
page_cache_sync_readahead();
page = find_get_page();
if (page && PageReadahead(page))
page_cache_async_readahead();
This is because PG_readahead could be set by a sync readahead for the
_current_ newly faulted in page, and the readahead code simply expects one
more callback on the same page to start the async readahead. If the
caller fails to do so, it will miss the PG_readahead bits and never able
to start an async readahead.
Eliminate this insane constraint by piggy-backing the async part into the
current readahead window.
Now if an async readahead should be started immediately after a sync one,
the readahead logic itself will do it. So the following code becomes
valid: (the 'else' in particular)
if (!page)
page_cache_sync_readahead();
else if (PageReadahead(page))
page_cache_async_readahead();
Cc: Nick Piggin <npiggin@suse.de>
Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>
Cc: Ying Han <yinghan@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Make sure interleaved readahead size is larger than request size. This
also makes the readahead window grow up more quickly.
Reported-by: Xu Chenfeng <xcf@ustc.edu.cn>
Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>
Cc: Ying Han <yinghan@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
(hit_readahead_marker != 0) means the page at @offset is present, so we
can search for non-present page starting from @offset+1.
Reported-by: Xu Chenfeng <xcf@ustc.edu.cn>
Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>
Cc: Ying Han <yinghan@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Just in case someone aggressively sets a huge readahead size.
Cc: Nick Piggin <npiggin@suse.de>
Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>
Cc: Ying Han <yinghan@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Impact: code simplification.
Cc: Nick Piggin <npiggin@suse.de>
Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>
Cc: Ying Han <yinghan@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Recruit a page flag to aid in cache management. The following extra flag is
defined:
(1) PG_fscache (PG_private_2)
The marked page is backed by a local cache and is pinning resources in the
cache driver.
If PG_fscache is set, then things that checked for PG_private will now also
check for that. This includes things like truncation and page invalidation.
The function page_has_private() had been added to make the checks for both
PG_private and PG_private_2 at the same time.
Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Steve Dickson <steved@redhat.com>
Acked-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Acked-by: Rik van Riel <riel@redhat.com>
Acked-by: Al Viro <viro@zeniv.linux.org.uk>
Tested-by: Daire Byrne <Daire.Byrne@framestore.com>
|
|
The attached patch causes read_cache_pages() to release page-private data on a
page for which add_to_page_cache() fails. If the filler function fails, then
the problematic page is left attached to the pagecache (with appropriate flags
set, one presumes) and the remaining to-be-attached pages are invalidated and
discarded. This permits pages with caching references associated with them to
be cleaned up.
The invalidatepage() address space op is called (indirectly) to do the honours.
Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Steve Dickson <steved@redhat.com>
Acked-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Acked-by: Rik van Riel <riel@redhat.com>
Acked-by: Al Viro <viro@zeniv.linux.org.uk>
Tested-by: Daire Byrne <Daire.Byrne@framestore.com>
|
|
It really makes no sense to have it in readahead.c, so move it where
it belongs.
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
|
|
Split the LRU lists in two, one set for pages that are backed by real file
systems ("file") and one for pages that are backed by memory and swap
("anon"). The latter includes tmpfs.
The advantage of doing this is that the VM will not have to scan over lots
of anonymous pages (which we generally do not want to swap out), just to
find the page cache pages that it should evict.
This patch has the infrastructure and a basic policy to balance how much
we scan the anon lists and how much we scan the file lists. The big
policy changes are in separate patches.
[lee.schermerhorn@hp.com: collect lru meminfo statistics from correct offset]
[kosaki.motohiro@jp.fujitsu.com: prevent incorrect oom under split_lru]
[kosaki.motohiro@jp.fujitsu.com: fix pagevec_move_tail() doesn't treat unevictable page]
[hugh@veritas.com: memcg swapbacked pages active]
[hugh@veritas.com: splitlru: BDI_CAP_SWAP_BACKED]
[akpm@linux-foundation.org: fix /proc/vmstat units]
[nishimura@mxp.nes.nec.co.jp: memcg: fix handling of shmem migration]
[kosaki.motohiro@jp.fujitsu.com: adjust Quicklists field of /proc/meminfo]
[kosaki.motohiro@jp.fujitsu.com: fix style issue of get_scan_ratio()]
Signed-off-by: Rik van Riel <riel@redhat.com>
Signed-off-by: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: Hugh Dickins <hugh@veritas.com>
Signed-off-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
People can use the real name an an index into MAINTAINERS to find the
current email address.
Signed-off-by: Francois Cami <francois.cami@free.fr>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
radix_tree_next_hole() is implemented as a series of radix_tree_lookup()s.
So it can be called locklessly, under rcu_read_lock().
Signed-off-by: Nick Piggin <npiggin@suse.de>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Hugh Dickins <hugh@veritas.com>
Cc: "Paul E. McKenney" <paulmck@us.ibm.com>
Reviewed-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Provide a place in sysfs (/sys/class/bdi) for the backing_dev_info object.
This allows us to see and set the various BDI specific variables.
In particular this properly exposes the read-ahead window for all relevant
users and /sys/block/<block>/queue/read_ahead_kb should be deprecated.
With patient help from Kay Sievers and Greg KH
[mszeredi@suse.cz]
- split off NFS and FUSE changes into separate patches
- document new sysfs attributes under Documentation/ABI
- do bdi_class_init as a core_initcall, otherwise the "default" BDI
won't be initialized
- remove bdi_init_fmt macro, it's not used very much
[akpm@linux-foundation.org: fix ia64 warning]
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Kay Sievers <kay.sievers@vrfy.org>
Acked-by: Greg KH <greg@kroah.com>
Cc: Trond Myklebust <trond.myklebust@fys.uio.no>
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Fix kernel-doc notation in mm/readahead.c.
Change ":" to ";" so that it doesn't get treated as a doc section heading.
Move the comment block ending "*/" to a line by itself so that the text on
that last line is not lost (dropped).
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
provide BDI constructor/destructor hooks
[akpm@linux-foundation.org: compile fix]
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Quite a bit of code is used in maintaining these "cached pages" that are
probably pretty unlikely to get used. It would require a narrow race where
the page is inserted concurrently while this process is allocating a page
in order to create the spare page. Then a multi-page write into an uncached
part of the file, to make use of it.
Next, the buffered write path (and others) uses its own LRU pagevec when it
should be just using the per-CPU LRU pagevec (which will cut down on both data
and code size cacheline footprint). Also, these private LRU pagevecs are
emptied after just a very short time, in contrast with the per-CPU pagevecs
that are persistent. Net result: 7.3 times fewer lru_lock acquisitions required
to add the pages to pagecache for a bulk write (in 4K chunks).
[this gets rid of some cond_resched() calls in readahead.c and mpage.c due
to clashes in -mm. What put them there, and why? ]
Signed-off-by: Nick Piggin <npiggin@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Probing pages and radix_tree_tagged are lockless operations with the lockless
radix-tree. Convert these users to RCU locking rather than using tree_lock.
Signed-off-by: Nick Piggin <npiggin@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Remove VM_MAX_CACHE_HIT, MAX_RA_PAGES and MIN_RA_PAGES.
Signed-off-by: Fengguang Wu <wfg@mail.ustc.edu.cn>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
This is a simplified version of the pagecache context based readahead. It
handles the case of multiple threads reading on the same fd and invalidating
each others' readahead state. It does the trick by scanning the pagecache and
recovering the current read stream's readahead status.
The algorithm works in a opportunistic way, in that it does not try to detect
interleaved reads _actively_, which requires a probe into the page cache
(which means a little more overhead for random reads). It only tries to
handle a previously started sequential readahead whose state was overwritten
by another concurrent stream, and it can do this job pretty well.
Negative and positive examples(or what you can expect from it):
1) it cannot detect and serve perfect request-by-request interleaved reads
right:
time stream 1 stream 2
0 1
1 1001
2 2
3 1002
4 3
5 1003
6 4
7 1004
8 5
9 1005
Here no single readahead will be carried out.
2) However, if it's two concurrent reads by two threads, the chance of the
initial sequential readahead be started is huge. Once the first sequential
readahead is started for a stream, this patch will ensure that the readahead
window continues to rampup and won't be disturbed by other streams.
time stream 1 stream 2
0 1
1 2
2 1001
3 3
4 1002
5 1003
6 4
7 5
8 1004
9 6
10 1005
11 7
12 1006
13 1007
Here stream 1 will start a readahead at page 2, and stream 2 will start its
first readahead at page 1003. From then on the two streams will be served
right.
Cc: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Fengguang Wu <wfg@mail.ustc.edu.cn>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Combine the file_ra_state members
unsigned long prev_index
unsigned int prev_offset
into
loff_t prev_pos
It is more consistent and better supports huge files.
Thanks to Peter for the nice proposal!
[akpm@linux-foundation.org: fix shift overflow]
Cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Fengguang Wu <wfg@mail.ustc.edu.cn>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Use 'unsigned int' instead of 'unsigned long' for readahead sizes.
This helps reduce memory consumption on 64bit CPU when a lot of files are
opened.
CC: Andi Kleen <andi@firstfloor.org>
Signed-off-by: Fengguang Wu <wfg@mail.ustc.edu.cn>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Hide everything in blkdev.h with CONFIG_BLOCK isn't set, and fixup
the (few) files that fail to build because they were relying on blkdev.h
pulling in extra includes for them.
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
|
|
Rename some file_ra_state variables and remove some accessors.
It results in much simpler code.
Kudos to Rusty!
Signed-off-by: Fengguang Wu <wfg@mail.ustc.edu.cn>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Split ondemand readahead interface into two functions. I think this makes it
a little clearer for non-readahead experts (like Rusty).
Internally they both call ondemand_readahead(), but the page argument is
changed to an obvious boolean flag.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Fengguang Wu <wfg@mail.ustc.edu.cn>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Share the same page flag bit for PG_readahead and PG_reclaim.
One is used only on file reads, another is only for emergency writes. One
is used mostly for fresh/young pages, another is for old pages.
Combinations of possible interactions are:
a) clear PG_reclaim => implicit clear of PG_readahead
it will delay an asynchronous readahead into a synchronous one
it actually does _good_ for readahead:
the pages will be reclaimed soon, it's readahead thrashing!
in this case, synchronous readahead makes more sense.
b) clear PG_readahead => implicit clear of PG_reclaim
one(and only one) page will not be reclaimed in time
it can be avoided by checking PageWriteback(page) in readahead first
c) set PG_reclaim => implicit set of PG_readahead
will confuse readahead and make it restart the size rampup process
it's a trivial problem, and can mostly be avoided by checking
PageWriteback(page) first in readahead
d) set PG_readahead => implicit set of PG_reclaim
PG_readahead will never be set on already cached pages.
PG_reclaim will always be cleared on dirtying a page.
so not a problem.
In summary,
a) we get better behavior
b,d) possible interactions can be avoided
c) racy condition exists that might affect readahead, but the chance
is _really_ low, and the hurt on readahead is trivial.
Compound pages also use PG_reclaim, but for now they do not interact with
reclaim/readahead code.
Signed-off-by: Fengguang Wu <wfg@mail.ustc.edu.cn>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Remove the old readahead algorithm.
Signed-off-by: Fengguang Wu <wfg@mail.ustc.edu.cn>
Cc: Steven Pratt <slpratt@austin.ibm.com>
Cc: Ram Pai <linuxram@us.ibm.com>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
This is a minimal readahead algorithm that aims to replace the current one.
It is more flexible and reliable, while maintaining almost the same behavior
and performance. Also it is full integrated with adaptive readahead.
It is designed to be called on demand:
- on a missing page, to do synchronous readahead
- on a lookahead page, to do asynchronous readahead
In this way it eliminated the awkward workarounds for cache hit/miss,
readahead thrashing, retried read, and unaligned read. It also adopts the
data structure introduced by adaptive readahead, parameterizes readahead
pipelining with `lookahead_index', and reduces the current/ahead windows to
one single window.
HEURISTICS
The logic deals with four cases:
- sequential-next
found a consistent readahead window, so push it forward
- random
standalone small read, so read as is
- sequential-first
create a new readahead window for a sequential/oversize request
- lookahead-clueless
hit a lookahead page not associated with the readahead window,
so create a new readahead window and ramp it up
In each case, three parameters are determined:
- readahead index: where the next readahead begins
- readahead size: how much to readahead
- lookahead size: when to do the next readahead (for pipelining)
BEHAVIORS
The old behaviors are maximally preserved for trivial sequential/random reads.
Notable changes are:
- It no longer imposes strict sequential checks.
It might help some interleaved cases, and clustered random reads.
It does introduce risks of a random lookahead hit triggering an
unexpected readahead. But in general it is more likely to do good
than to do evil.
- Interleaved reads are supported in a minimal way.
Their chances of being detected and proper handled are still low.
- Readahead thrashings are better handled.
The current readahead leads to tiny average I/O sizes, because it
never turn back for the thrashed pages. They have to be fault in
by do_generic_mapping_read() one by one. Whereas the on-demand
readahead will redo readahead for them.
OVERHEADS
The new code reduced the overheads of
- excessively calling the readahead routine on small sized reads
(the current readahead code insists on seeing all requests)
- doing a lot of pointless page-cache lookups for small cached files
(the current readahead only turns itself off after 256 cache hits,
unfortunately most files are < 1MB, so never see that chance)
That accounts for speedup of
- 0.3% on 1-page sequential reads on sparse file
- 1.2% on 1-page cache hot sequential reads
- 3.2% on 256-page cache hot sequential reads
- 1.3% on cache hot `tar /lib`
However, it does introduce one extra page-cache lookup per cache miss, which
impacts random reads slightly. That's 1% overheads for 1-page random reads on
sparse file.
PERFORMANCE
The basic benchmark setup is
- 2.6.20 kernel with on-demand readahead
- 1MB max readahead size
- 2.9GHz Intel Core 2 CPU
- 2GB memory
- 160G/8M Hitachi SATA II 7200 RPM disk
The benchmarks show that
- it maintains the same performance for trivial sequential/random reads
- sysbench/OLTP performance on MySQL gains up to 8%
- performance on readahead thrashing gains up to 3 times
iozone throughput (KB/s): roughly the same
==========================================
iozone -c -t1 -s 4096m -r 64k
2.6.20 on-demand gain
first run
" Initial write " 61437.27 64521.53 +5.0%
" Rewrite " 47893.02 48335.20 +0.9%
" Read " 62111.84 62141.49 +0.0%
" Re-read " 62242.66 62193.17 -0.1%
" Reverse Read " 50031.46 49989.79 -0.1%
" Stride read " 8657.61 8652.81 -0.1%
" Random read " 13914.28 13898.23 -0.1%
" Mixed workload " 19069.27 19033.32 -0.2%
" Random write " 14849.80 14104.38 -5.0%
" Pwrite " 62955.30 65701.57 +4.4%
" Pread " 62209.99 62256.26 +0.1%
second run
" Initial write " 60810.31 66258.69 +9.0%
" Rewrite " 49373.89 57833.66 +17.1%
" Read " 62059.39 62251.28 +0.3%
" Re-read " 62264.32 62256.82 -0.0%
" Reverse Read " 49970.96 50565.72 +1.2%
" Stride read " 8654.81 8638.45 -0.2%
" Random read " 13901.44 13949.91 +0.3%
" Mixed workload " 19041.32 19092.04 +0.3%
" Random write " 14019.99 14161.72 +1.0%
" Pwrite " 64121.67 68224.17 +6.4%
" Pread " 62225.08 62274.28 +0.1%
In summary, writes are unstable, reads are pretty close on average:
access pattern 2.6.20 on-demand gain
Read 62085.61 62196.38 +0.2%
Re-read 62253.49 62224.99 -0.0%
Reverse Read 50001.21 50277.75 +0.6%
Stride read 8656.21 8645.63 -0.1%
Random read 13907.86 13924.07 +0.1%
Mixed workload 19055.29 19062.68 +0.0%
Pread 62217.53 62265.27 +0.1%
aio-stress: roughly the same
============================
aio-stress -l -s4096 -r128 -t1 -o1 knoppix511-dvd-cn.iso
aio-stress -l -s4096 -r128 -t1 -o3 knoppix511-dvd-cn.iso
2.6.20 on-demand delta
sequential 92.57s 92.54s -0.0%
random 311.87s 312.15s +0.1%
sysbench fileio: roughly the same
=================================
sysbench --test=fileio --file-io-mode=async --file-test-mode=rndrw \
--file-total-size=4G --file-block-size=64K \
--num-threads=001 --max-requests=10000 --max-time=900 run
threads 2.6.20 on-demand delta
first run
1 59.1974s 59.2262s +0.0%
2 58.0575s 58.2269s +0.3%
4 48.0545s 47.1164s -2.0%
8 41.0684s 41.2229s +0.4%
16 35.8817s 36.4448s +1.6%
32 32.6614s 32.8240s +0.5%
64 23.7601s 24.1481s +1.6%
128 24.3719s 23.8225s -2.3%
256 23.2366s 22.0488s -5.1%
second run
1 59.6720s 59.5671s -0.2%
8 41.5158s 41.9541s +1.1%
64 25.0200s 23.9634s -4.2%
256 22.5491s 20.9486s -7.1%
Note that the numbers are not very stable because of the writes.
The overall performance is close when we sum all seconds up:
sum all up 495.046s 491.514s -0.7%
sysbench oltp (trans/sec): up to 8% gain
========================================
sysbench --test=oltp --oltp-table-size=10000000 --oltp-read-only \
--mysql-socket=/var/run/mysqld/mysqld.sock \
--mysql-user=root --mysql-password=readahead \
--num-threads=064 --max-requests=10000 --max-time=900 run
10000-transactions run
threads 2.6.20 on-demand gain
1 62.81 64.56 +2.8%
2 67.97 70.93 +4.4%
4 81.81 85.87 +5.0%
8 94.60 97.89 +3.5%
16 99.07 104.68 +5.7%
32 95.93 104.28 +8.7%
64 96.48 103.68 +7.5%
5000-transactions run
1 48.21 48.65 +0.9%
8 68.60 70.19 +2.3%
64 70.57 74.72 +5.9%
2000-transactions run
1 37.57 38.04 +1.3%
2 38.43 38.99 +1.5%
4 45.39 46.45 +2.3%
8 51.64 52.36 +1.4%
16 54.39 55.18 +1.5%
32 52.13 54.49 +4.5%
64 54.13 54.61 +0.9%
That's interesting results. Some investigations show that
- MySQL is accessing the db file non-uniformly: some parts are
more hot than others
- It is mostly doing 4-page random reads, and sometimes doing two
reads in a row, the latter one triggers a 16-page readahead.
- The on-demand readahead leaves many lookahead pages (flagged
PG_readahead) there. Many of them will be hit, and trigger
more readahead pages. Which might save more seeks.
- Naturally, the readahead windows tend to lie in hot areas,
and the lookahead pages in hot areas is more likely to be hit.
- The more overall read density, the more possible gain.
That also explains the adaptive readahead tricks for clustered random reads.
readahead thrashing: 3 times better
===================================
We boot kernel with "mem=128m single", and start a 100KB/s stream on every
second, until reaching 200 streams.
max throughput min avg I/O size
2.6.20: 5MB/s 16KB
on-demand: 15MB/s 140KB
Signed-off-by: Fengguang Wu <wfg@mail.ustc.edu.cn>
Cc: Steven Pratt <slpratt@austin.ibm.com>
Cc: Ram Pai <linuxram@us.ibm.com>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Extend struct file_ra_state to support the on-demand readahead logic. Also
define some helpers for it.
Signed-off-by: Fengguang Wu <wfg@mail.ustc.edu.cn>
Cc: Steven Pratt <slpratt@austin.ibm.com>
Cc: Ram Pai <linuxram@us.ibm.com>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Define two convenient macros for read-ahead:
- MAX_RA_PAGES: rounded down counterpart of VM_MAX_READAHEAD
- MIN_RA_PAGES: rounded _up_ counterpart of VM_MIN_READAHEAD
Note that the rounded up MIN_RA_PAGES will work flawlessly with _large_
page sizes like 64k.
Signed-off-by: Fengguang Wu <wfg@mail.ustc.edu.cn>
Cc: Steven Pratt <slpratt@austin.ibm.com>
Cc: Ram Pai <linuxram@us.ibm.com>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Add look-ahead support to __do_page_cache_readahead().
It works by
- mark the Nth backwards page with PG_readahead,
(which instructs the page's first reader to invoke readahead)
- and only do the marking for newly allocated pages.
(to prevent blindly doing readahead on already cached pages)
Look-ahead is a technique to achieve I/O pipelining:
While the application is working through a chunk of cached pages, the kernel
reads-ahead the next chunk of pages _before_ time of need. It effectively
hides low level I/O latencies to high level applications.
Signed-off-by: Fengguang Wu <wfg@mail.ustc.edu.cn>
Cc: Steven Pratt <slpratt@austin.ibm.com>
Cc: Ram Pai <linuxram@us.ibm.com>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Rename file_ra_state.prev_page to prev_index and file_ra_state.offset to
prev_offset. Also update of prev_index in do_generic_mapping_read() is now
moved close to the update of prev_offset.
[wfg@mail.ustc.edu.cn: fix it]
Signed-off-by: Jan Kara <jack@suse.cz>
Cc: Nick Piggin <nickpiggin@yahoo.com.au>
Cc: WU Fengguang <wfg@mail.ustc.edu.cn>
Signed-off-by: Fengguang Wu <wfg@mail.ustc.edu.cn>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Introduce ra.offset and store in it an offset where the previous read
ended. This way we can detect whether reads are really sequential (and
thus we should not mark the page as accessed repeatedly) or whether they
are random and just happen to be in the same page (and the page should
really be marked accessed again).
Signed-off-by: Jan Kara <jack@suse.cz>
Acked-by: Nick Piggin <nickpiggin@yahoo.com.au>
Cc: WU Fengguang <wfg@mail.ustc.edu.cn>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Values are readily available via ZVC per node and global sums.
Signed-off-by: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
