aboutsummaryrefslogtreecommitdiff
path: root/net/bluetooth
AgeCommit message (Collapse)Author
2013-09-27Merge branch 'master' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless into for-davem Also fixed-up a badly indented closing brace... Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-09-20Bluetooth: don't release the port in rfcomm_dev_state_change()Gianluca Anzolin
When the dlc is closed, rfcomm_dev_state_change() tries to release the port in the case it cannot get a reference to the tty. However this is racy and not even needed. Infact as Peter Hurley points out: 1. Only consider dlcs that are 'stolen' from a connected socket, ie. reused. Allocated dlcs cannot have been closed prior to port activate and so for these dlcs a tty reference will always be avail in rfcomm_dev_state_change() -- except for the conditions covered by #2b below. 2. If a tty was at some point previously created for this rfcomm, then either (a) the tty reference is still avail, so rfcomm_dev_state_change() will perform a hangup. So nothing to do, or, (b) the tty reference is no longer avail, and the tty_port will be destroyed by the last tty_port_put() in rfcomm_tty_cleanup. Again, no action required. 3. Prior to obtaining the dlc lock in rfcomm_dev_add(), rfcomm_dev_state_change() will not 'see' a rfcomm_dev so nothing to do here. 4. After releasing the dlc lock in rfcomm_dev_add(), rfcomm_dev_state_change() will 'see' an incomplete rfcomm_dev if a tty reference could not be obtained. Again, the best thing to do here is nothing. Any future attempted open() will block on rfcomm_dev_carrier_raised(). The unconnected device will exist until released by ioctl(RFCOMMRELEASEDEV). The patch removes the aforementioned code and uses the tty_port_tty_hangup() helper to hangup the tty. Signed-off-by: Gianluca Anzolin <gianluca@sottospazio.it> Reviewed-by: Peter Hurley <peter@hurleysoftware.com> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2013-09-18Bluetooth: Fix rfkill functionality during the HCI setup stageJohan Hedberg
We need to let the setup stage complete cleanly even when the HCI device is rfkilled. Otherwise the HCI device will stay in an undefined state and never get notified to user space through mgmt (even when it gets unblocked through rfkill). This patch makes sure that hci_dev_open() can be called in the HCI_SETUP stage, that blocking the device doesn't abort the setup stage, and that the device gets proper powered down as soon as the setup stage completes in case it was blocked meanwhile. The bug that this patch fixed can be very easily reproduced using e.g. the rfkill command line too. By running "rfkill block all" before inserting a Bluetooth dongle the resulting HCI device goes into a state where it is never announced over mgmt, not even when "rfkill unblock all" is run. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Cc: stable@vger.kernel.org Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2013-09-18Bluetooth: Introduce a new HCI_RFKILLED flagJohan Hedberg
This makes it more convenient to check for rfkill (no need to check for dev->rfkill before calling rfkill_blocked()) and also avoids potential races if the RFKILL state needs to be checked from within the rfkill callback. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Cc: stable@vger.kernel.org Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2013-09-16Bluetooth: Fix ACL alive for long in case of non pariable devicesSyam Sidhardhan
For certain devices (ex: HID mouse), support for authentication, pairing and bonding is optional. For such devices, the ACL alive for too long after the L2CAP disconnection. To avoid the ACL alive for too long after L2CAP disconnection, reset the ACL disconnect timeout back to HCI_DISCONN_TIMEOUT during L2CAP connect. While merging the commit id:a9ea3ed9b71cc3271dd59e76f65748adcaa76422 this issue might have introduced. Hcidump info: sh-4.1# /opt/hcidump -Xt 2013-08-05 16:49:00.894129 < ACL data: handle 12 flags 0x00 dlen 12 L2CAP(s): Disconn req: dcid 0x004a scid 0x0041 2013-08-05 16:49:00.894195 < HCI Command: Exit Sniff Mode (0x02|0x0004) plen 2 handle 12 2013-08-05 16:49:00.894269 < ACL data: handle 12 flags 0x00 dlen 12 L2CAP(s): Disconn req: dcid 0x0049 scid 0x0040 2013-08-05 16:49:00.895645 > HCI Event: Command Status (0x0f) plen 4 Exit Sniff Mode (0x02|0x0004) status 0x00 ncmd 1 2013-08-05 16:49:00.934391 > HCI Event: Mode Change (0x14) plen 6 status 0x00 handle 12 mode 0x00 interval 0 Mode: Active 2013-08-05 16:49:00.936592 > HCI Event: Number of Completed Packets (0x13) plen 5 handle 12 packets 2 2013-08-05 16:49:00.951577 > ACL data: handle 12 flags 0x02 dlen 12 L2CAP(s): Disconn rsp: dcid 0x004a scid 0x0041 2013-08-05 16:49:00.952820 > ACL data: handle 12 flags 0x02 dlen 12 L2CAP(s): Disconn rsp: dcid 0x0049 scid 0x0040 2013-08-05 16:49:00.969165 > HCI Event: Mode Change (0x14) plen 6 status 0x00 handle 12 mode 0x02 interval 50 Mode: Sniff 2013-08-05 16:49:48.175533 > HCI Event: Mode Change (0x14) plen 6 status 0x00 handle 12 mode 0x00 interval 0 Mode: Active 2013-08-05 16:49:48.219045 > HCI Event: Mode Change (0x14) plen 6 status 0x00 handle 12 mode 0x02 interval 108 Mode: Sniff 2013-08-05 16:51:00.968209 < HCI Command: Disconnect (0x01|0x0006) plen 3 handle 12 reason 0x13 Reason: Remote User Terminated Connection 2013-08-05 16:51:00.969056 > HCI Event: Command Status (0x0f) plen 4 Disconnect (0x01|0x0006) status 0x00 ncmd 1 2013-08-05 16:51:01.013495 > HCI Event: Mode Change (0x14) plen 6 status 0x00 handle 12 mode 0x00 interval 0 Mode: Active 2013-08-05 16:51:01.073777 > HCI Event: Disconn Complete (0x05) plen 4 status 0x00 handle 12 reason 0x16 Reason: Connection Terminated by Local Host ============================ After fix ================================ 2013-08-05 16:57:35.986648 < ACL data: handle 11 flags 0x00 dlen 12 L2CAP(s): Disconn req: dcid 0x004c scid 0x0041 2013-08-05 16:57:35.986713 < HCI Command: Exit Sniff Mode (0x02|0x0004) plen 2 handle 11 2013-08-05 16:57:35.986785 < ACL data: handle 11 flags 0x00 dlen 12 L2CAP(s): Disconn req: dcid 0x004b scid 0x0040 2013-08-05 16:57:35.988110 > HCI Event: Command Status (0x0f) plen 4 Exit Sniff Mode (0x02|0x0004) status 0x00 ncmd 1 2013-08-05 16:57:36.030714 > HCI Event: Mode Change (0x14) plen 6 status 0x00 handle 11 mode 0x00 interval 0 Mode: Active 2013-08-05 16:57:36.032950 > HCI Event: Number of Completed Packets (0x13) plen 5 handle 11 packets 2 2013-08-05 16:57:36.047926 > ACL data: handle 11 flags 0x02 dlen 12 L2CAP(s): Disconn rsp: dcid 0x004c scid 0x0041 2013-08-05 16:57:36.049200 > ACL data: handle 11 flags 0x02 dlen 12 L2CAP(s): Disconn rsp: dcid 0x004b scid 0x0040 2013-08-05 16:57:36.065509 > HCI Event: Mode Change (0x14) plen 6 status 0x00 handle 11 mode 0x02 interval 50 Mode: Sniff 2013-08-05 16:57:40.052006 < HCI Command: Disconnect (0x01|0x0006) plen 3 handle 11 reason 0x13 Reason: Remote User Terminated Connection 2013-08-05 16:57:40.052869 > HCI Event: Command Status (0x0f) plen 4 Disconnect (0x01|0x0006) status 0x00 ncmd 1 2013-08-05 16:57:40.104731 > HCI Event: Mode Change (0x14) plen 6 status 0x00 handle 11 mode 0x00 interval 0 Mode: Active 2013-08-05 16:57:40.146935 > HCI Event: Disconn Complete (0x05) plen 4 status 0x00 handle 11 reason 0x16 Reason: Connection Terminated by Local Host Signed-off-by: Sang-Ki Park <sangki79.park@samsung.com> Signed-off-by: Chan-yeol Park <chanyeol.park@samsung.com> Signed-off-by: Jaganath Kanakkassery <jaganath.k@samsung.com> Signed-off-by: Szymon Janc <szymon.janc@tieto.com> Signed-off-by: Syam Sidhardhan <s.syam@samsung.com> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2013-09-16Bluetooth: Fix encryption key size for peripheral roleAndre Guedes
This patch fixes the connection encryption key size information when the host is playing the peripheral role. We should set conn->enc_key_ size in hci_le_ltk_request_evt, otherwise it is left uninitialized. Cc: Stable <stable@vger.kernel.org> Signed-off-by: Andre Guedes <andre.guedes@openbossa.org> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2013-09-16Bluetooth: Fix security level for peripheral roleAndre Guedes
While playing the peripheral role, the host gets a LE Long Term Key Request Event from the controller when a connection is established with a bonded device. The host then informs the LTK which should be used for the connection. Once the link is encrypted, the host gets an Encryption Change Event. Therefore we should set conn->pending_sec_level instead of conn-> sec_level in hci_le_ltk_request_evt. This way, conn->sec_level is properly updated in hci_encrypt_change_evt. Moreover, since we have a LTK associated to the device, we have at least BT_SECURITY_MEDIUM security level. Cc: Stable <stable@vger.kernel.org> Signed-off-by: Andre Guedes <andre.guedes@openbossa.org> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2013-09-06Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid Pull HID updates from Jiri Kosina: "Highlights: - conversion of HID subsystem to use devm-based resource management, from Benjamin Tissoires - i2c-hid support for DT bindings, from Benjamin Tissoires - much improved support for Win8-multitouch devices, from Benjamin Tissoires - cleanup of core code using common hidinput_input_event(), from David Herrmann - fix for bug in implement() access to the bit stream (causing oops) that has been present in the code for ages, but devices that are able to trigger it have started to appear only now, from Jiri Kosina - fixes for CVE-2013-2899, CVE-2013-2898, CVE-2013-2896, CVE-2013-2892, CVE-2013-2888 (all triggerable only by specially crafted malicious HW devices plugged into the system), from Kees Cook - hidraw oops fix, from Manoj Chourasia - various smaller fixes here and there, support for a bunch of new devices by various contributors" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid: (53 commits) HID: MAINTAINERS: add roccat drivers HID: hid-sensor-hub: change kmalloc + memcpy by kmemdup HID: hid-sensor-hub: move to devm_kzalloc HID: hid-sensor-hub: fix indentation accross the code HID: move HID_REPORT_TYPES closer to the report-definitions HID: check for NULL field when setting values HID: picolcd_core: validate output report details HID: sensor-hub: validate feature report details HID: ntrig: validate feature report details HID: pantherlord: validate output report details HID: hid-wiimote: print small buffers via %*phC HID: uhid: improve uhid example client HID: Correct the USB IDs for the new Macbook Air 6 HID: wiimote: add support for Guitar-Hero guitars HID: wiimote: add support for Guitar-Hero drums Input: introduce BTN/ABS bits for drums and guitars HID: battery: don't do DMA from stack HID: roccat: add support for KonePureOptical v2 HID: picolcd: Prevent NULL pointer dereference on _remove() HID: usbhid: quirk for N-Trig DuoSense Touch Screen ...
2013-09-05Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-nextLinus Torvalds
Pull networking changes from David Miller: "Noteworthy changes this time around: 1) Multicast rejoin support for team driver, from Jiri Pirko. 2) Centralize and simplify TCP RTT measurement handling in order to reduce the impact of bad RTO seeding from SYN/ACKs. Also, when both timestamps and local RTT measurements are available prefer the later because there are broken middleware devices which scramble the timestamp. From Yuchung Cheng. 3) Add TCP_NOTSENT_LOWAT socket option to limit the amount of kernel memory consumed to queue up unsend user data. From Eric Dumazet. 4) Add a "physical port ID" abstraction for network devices, from Jiri Pirko. 5) Add a "suppress" operation to influence fib_rules lookups, from Stefan Tomanek. 6) Add a networking development FAQ, from Paul Gortmaker. 7) Extend the information provided by tcp_probe and add ipv6 support, from Daniel Borkmann. 8) Use RCU locking more extensively in openvswitch data paths, from Pravin B Shelar. 9) Add SCTP support to openvswitch, from Joe Stringer. 10) Add EF10 chip support to SFC driver, from Ben Hutchings. 11) Add new SYNPROXY netfilter target, from Patrick McHardy. 12) Compute a rate approximation for sending in TCP sockets, and use this to more intelligently coalesce TSO frames. Furthermore, add a new packet scheduler which takes advantage of this estimate when available. From Eric Dumazet. 13) Allow AF_PACKET fanouts with random selection, from Daniel Borkmann. 14) Add ipv6 support to vxlan driver, from Cong Wang" Resolved conflicts as per discussion. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1218 commits) openvswitch: Fix alignment of struct sw_flow_key. netfilter: Fix build errors with xt_socket.c tcp: Add missing braces to do_tcp_setsockopt caif: Add missing braces to multiline if in cfctrl_linkup_request bnx2x: Add missing braces in bnx2x:bnx2x_link_initialize vxlan: Fix kernel panic on device delete. net: mvneta: implement ->ndo_do_ioctl() to support PHY ioctls net: mvneta: properly disable HW PHY polling and ensure adjust_link() works icplus: Use netif_running to determine device state ethernet/arc/arc_emac: Fix huge delays in large file copies tuntap: orphan frags before trying to set tx timestamp tuntap: purge socket error queue on detach qlcnic: use standard NAPI weights ipv6:introduce function to find route for redirect bnx2x: VF RSS support - VF side bnx2x: VF RSS support - PF side vxlan: Notify drivers for listening UDP port changes net: usbnet: update addr_assign_type if appropriate driver/net: enic: update enic maintainers and driver driver/net: enic: Exposing symbols for Cisco's low latency driver ...
2013-09-04Merge tag 'PTR_RET-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux Pull PTR_RET() removal patches from Rusty Russell: "PTR_RET() is a weird name, and led to some confusing usage. We ended up with PTR_ERR_OR_ZERO(), and replacing or fixing all the usages. This has been sitting in linux-next for a whole cycle" [ There are still some PTR_RET users scattered about, with some of them possibly being new, but most of them existing in Rusty's tree too. We have that #define PTR_RET(p) PTR_ERR_OR_ZERO(p) thing in <linux/err.h>, so they continue to work for now - Linus ] * tag 'PTR_RET-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux: GFS2: Replace PTR_RET with PTR_ERR_OR_ZERO Btrfs: volume: Replace PTR_RET with PTR_ERR_OR_ZERO drm/cma: Replace PTR_RET with PTR_ERR_OR_ZERO sh_veu: Replace PTR_RET with PTR_ERR_OR_ZERO dma-buf: Replace PTR_RET with PTR_ERR_OR_ZERO drivers/rtc: Replace PTR_RET with PTR_ERR_OR_ZERO mm/oom_kill: remove weird use of ERR_PTR()/PTR_ERR(). staging/zcache: don't use PTR_RET(). remoteproc: don't use PTR_RET(). pinctrl: don't use PTR_RET(). acpi: Replace weird use of PTR_RET. s390: Replace weird use of PTR_RET. PTR_RET is now PTR_ERR_OR_ZERO(): Replace most. PTR_RET is now PTR_ERR_OR_ZERO
2013-09-04Merge branch 'master' into for-3.12/upstreamJiri Kosina
Sync with Linus' tree to be able to apply fixup patch on top of 9d9a04ee75 ("HID: apple: Add support for the 2013 Macbook Air") Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2013-08-22Merge branch 'master' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next
2013-08-21Bluetooth: Add SCO connection fallbackFrédéric Dalleau
When initiating a transparent eSCO connection, make use of T2 settings at first try. T2 is the recommended settings from HFP 1.6 WideBand Speech. Upon connection failure, try T1 settings. When CVSD is requested and eSCO is supported, try to establish eSCO connection using S3 settings. If it fails, fallback in sequence to S2, S1, D1, D0 settings. To know which setting should be used, conn->attempt is used. It indicates the currently ongoing SCO connection attempt and can be used as the index for the fallback settings table. These setting and the fallback order are described in Bluetooth HFP 1.6 specification p. 101. Signed-off-by: Frédéric Dalleau <frederic.dalleau@linux.intel.com> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2013-08-21Bluetooth: Handle specific error for SCO connection fallbackFrédéric Dalleau
Synchronous Connection Complete event can return error "Connection Rejected due to Limited resources (0x10)". Handling this error is required for SCO connection fallback. This error happens when the server tried to accept the connection but failed to negotiate settings. This error code has been verified experimentally by sending a T2 request to a T1 only SCO listener. Client dump follows : < HCI Command (0x01|0x0028) plen 17 [hci0] 3.696064 Handle: 12 Transmit bandwidth: 8000 Receive bandwidth: 8000 Max latency: 13 Setting: 0x0003 Retransmission effort: Optimize for link quality (0x02) Packet type: 0x0380 > HCI Event (0x0f) plen 4 [hci0] 3.697034 Setup Synchronous Connection (0x01|0x0028) ncmd 1 Status: Success (0x00) > HCI Event (0x2c) plen 17 [hci0] 3.736059 Status: Connection Rejected due to Limited Resources (0x0d) Handle: 0 Address: xx:xx:xx:xx:xx:AB (OUI 70-F3-95) Link type: eSCO (0x02) Transmission interval: 0x0c Retransmission window: 0x06 RX packet length: 60 TX packet length: 60 Air mode: Transparent (0x03) Server dump follows : > HCI Event (0x04) plen 10 [hci0] 4.741513 Address: xx:xx:xx:xx:xx:D9 (OUI 20-68-9D) Class: 0x620100 Major class: Computer (desktop, notebook, PDA, organizers) Minor class: Uncategorized, code for device not assigned Networking (LAN, Ad hoc) Audio (Speaker, Microphone, Headset) Telephony (Cordless telephony, Modem, Headset) Link type: eSCO (0x02) < HCI Command (0x01|0x0029) plen 21 [hci0] 4.743269 Address: xx:xx:xx:xx:xx:D9 (OUI 20-68-9D) Transmit bandwidth: 8000 Receive bandwidth: 8000 Max latency: 13 Setting: 0x0003 Retransmission effort: Optimize for link quality (0x02) Packet type: 0x03c1 > HCI Event (0x0f) plen 4 [hci0] 4.745517 Accept Synchronous Connection (0x01|0x0029) ncmd 1 Status: Success (0x00) > HCI Event (0x2c) plen 17 [hci0] 4.749508 Status: Connection Rejected due to Limited Resources (0x0d) Handle: 0 Address: xx:xx:xx:xx:xx:D9 (OUI 20-68-9D) Link type: eSCO (0x02) Transmission interval: 0x0c Retransmission window: 0x06 RX packet length: 60 TX packet length: 60 Air mode: Transparent (0x03) Signed-off-by: Frédéric Dalleau <frederic.dalleau@linux.intel.com> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2013-08-21Bluetooth: Prevent transparent SCO on older devicesFrédéric Dalleau
Older Bluetooth devices may not support Setup Synchronous Connection or SCO transparent data. This is indicated by the corresponding LMP feature bits. It is not possible to know if the adapter support these features before setting BT_VOICE option since the socket is not bound to an adapter. An adapter can also be added after the socket is created. The socket can be bound to an address before adapter is plugged in. Thus, on a such adapters, if user request BT_VOICE_TRANSPARENT, outgoing connections fail on connect() and returns -EOPNOTSUPP. Incoming connections do not fail. However, they should only be allowed depending on what was specified in Write_Voice_Settings command. EOPNOTSUPP is choosen because connect() system call is failing after selecting route but before any connection attempt. Signed-off-by: Frédéric Dalleau <frederic.dalleau@linux.intel.com> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2013-08-21Bluetooth: Parameters for outgoing SCO connectionsFrédéric Dalleau
In order to establish a transparent SCO connection, the correct settings must be specified in the Setup Synchronous Connection request. For that, a setting field is added to ACL connection data to set up the desired parameters. The patch also removes usage of hdev->voice_setting in CVSD connection and makes use of T2 parameters for transparent data. Signed-off-by: Frédéric Dalleau <frederic.dalleau@linux.intel.com> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2013-08-21Bluetooth: Use voice setting in deferred SCO connection requestFrédéric Dalleau
When an incoming eSCO connection is requested, check the selected voice setting and reply appropriately. Voice setting should have been negotiated previously. For example, in case of HFP, the codec is negotiated using AT commands on the RFCOMM channel. This patch only changes replies for socket with deferred setup enabled. Signed-off-by: Frédéric Dalleau <frederic.dalleau@linux.intel.com> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2013-08-21Bluetooth: Add Bluetooth socket voice optionFrédéric Dalleau
This patch extends the current Bluetooth socket options with BT_VOICE. This is intended to choose voice data type at runtime. It only applies to SCO sockets. Incoming connections shall be setup during deferred setup. Outgoing connections shall be setup before connect(). The desired setting is stored in the SCO socket info. This patch declares needed members, modifies getsockopt() and setsockopt(). Signed-off-by: Frédéric Dalleau <frederic.dalleau@linux.intel.com> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2013-08-21Bluetooth: Remove unused mask parameter in sco_conn_defer_acceptFrédéric Dalleau
From Bluetooth Core v4.0 specification, 7.1.8 Accept Connection Request Command "When accepting synchronous connection request, the Role parameter is not used and will be ignored by the BR/EDR Controller." Signed-off-by: Frédéric Dalleau <frederic.dalleau@linux.intel.com> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2013-08-21Bluetooth: Use hci_connect_sco directlyFrédéric Dalleau
hci_connect is a super function for connecting hci protocols. But the voice_setting parameter (introduced in subsequent patches) is only needed by SCO and security requirements are not needed for SCO channels. Thus, it makes sense to have a separate function for SCO. Signed-off-by: Frédéric Dalleau <frederic.dalleau@linux.intel.com> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2013-08-21Bluetooth: Purge the dlc->tx_queue to avoid circular dependencyGianluca Anzolin
In rfcomm_tty_cleanup we purge the dlc->tx_queue which may contain socket buffers referencing the tty_port and thus preventing the tty_port destruction. Signed-off-by: Gianluca Anzolin <gianluca@sottospazio.it> Reviewed-by: Peter Hurley <peter@hurleysoftware.com> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2013-08-21Bluetooth: Fix the reference counting of tty_portGianluca Anzolin
The tty_port can be released in two cases: when we get a HUP in the functions rfcomm_tty_hangup() and rfcomm_dev_state_change(). Or when the user releases the device in rfcomm_release_dev(). In these cases we set the flag RFCOMM_TTY_RELEASED so that no other function can get a reference to the tty_port. The use of !test_and_set_bit(RFCOMM_TTY_RELEASED) ensures that the 'initial' tty_port reference is only dropped once. The rfcomm_dev_del function is removed becase it isn't used anymore. Signed-off-by: Gianluca Anzolin <gianluca@sottospazio.it> Reviewed-by: Peter Hurley <peter@hurleysoftware.com> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2013-08-21Bluetooth: Implement .activate, .shutdown and .carrier_raised methodsGianluca Anzolin
Implement .activate, .shutdown and .carrier_raised methods of tty_port to manage the dlc, moving the code from rfcomm_tty_install() and rfcomm_tty_cleanup() functions. At the same time the tty .open()/.close() and .hangup() methods are changed to use the tty_port helpers that properly call the aforementioned tty_port methods. Signed-off-by: Gianluca Anzolin <gianluca@sottospazio.it> Reviewed-by: Peter Hurley <peter@hurleysoftware.com> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2013-08-21Bluetooth: Move the tty initialization and cleanup out of open/closeGianluca Anzolin
Move the tty_struct initialization from rfcomm_tty_open() to rfcomm_tty_install() and do the same for the cleanup moving the code from rfcomm_tty_close() to rfcomm_tty_cleanup(). Add also extra error handling in rfcomm_tty_install() because, unlike .open()/.close(), .cleanup() is not called if .install() fails. Signed-off-by: Gianluca Anzolin <gianluca@sottospazio.it> Reviewed-by: Peter Hurley <peter@hurleysoftware.com> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2013-08-21Bluetooth: Remove the device from the list in the destructorGianluca Anzolin
The current code removes the device from the device list in several places. Do it only in the destructor instead and in the error path of rfcomm_add_dev() if the device couldn't be initialized. Signed-off-by: Gianluca Anzolin <gianluca@sottospazio.it> Reviewed-by: Peter Hurley <peter@hurleysoftware.com> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2013-08-21Bluetooth: Take proper tty_struct referencesGianluca Anzolin
In net/bluetooth/rfcomm/tty.c the struct tty_struct is used without taking references. This may lead to a use-after-free of the rfcomm tty. Fix this by taking references properly, using the tty_port_* helpers when possible. The raw assignments of dev->port.tty in rfcomm_tty_open/close are addressed in the later commit 'rfcomm: Implement .activate, .shutdown and .carrier_raised methods'. Signed-off-by: Gianluca Anzolin <gianluca@sottospazio.it> Reviewed-by: Peter Hurley <peter@hurleysoftware.com> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2013-08-21Bluetooth: Set different event mask for LE-only controllersMarcel Holtmann
In case of a Low Energy only controller it makes no sense to configure the full BR/EDR event mask. It will just enable events that can not be send anyway and there is no guarantee that such a controller will accept this value. Use event mask 0x90 0xe8 0x04 0x02 0x00 0x80 0x00 0x20 for LE-only controllers which enables the following events: Disconnection Complete Encryption Change Read Remote Version Information Complete Command Complete Command Status Hardware Error Number of Completed Packets Data Buffer Overflow Encryption Key Refresh Complete LE Meta This is according to Core Specification, Part E, Section 3. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2013-08-21Bluetooth: Fix getting SCO socket options in deferred stateJohan Hedberg
When a socket is in deferred state there does actually exist an underlying connection even though the connection state is not yet BT_CONNECTED. In the deferred state it should therefore be allowed to get socket options that usually depend on a connection, such as SCO_OPTIONS and SCO_CONNINFO. This patch fixes the behavior of some user space code that behaves as follows without it: $ sudo tools/btiotest -i 00:1B:DC:xx:xx:xx -d -s accept=2 reject=-1 discon=-1 defer=1 sec=0 update_sec=0 prio=0 voice=0x0000 Listening for SCO connections bt_io_get(OPT_DEST): getsockopt(SCO_OPTIONS): Transport endpoint is not connected (107) Accepting connection Successfully connected to 60:D8:19:xx:xx:xx. handle=43, class=000000 The conditions that the patch updates the if-statements to is taken from similar code in l2cap_sock.c which correctly handles the deferred state. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2013-07-31Merge branch 'master' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth Conflicts: net/bluetooth/hci_core.c
2013-07-29Bluetooth: Fix calling request callback more than onceJohan Hedberg
In certain circumstances, such as an HCI driver using __hci_cmd_sync_ev with HCI_EV_CMD_COMPLETE as the expected completion event there is the chance that hci_event_packet will call hci_req_cmd_complete twice (once for the explicitly looked after event and another time in the actual handler of cmd_complete). In the case of __hci_cmd_sync_ev this introduces a race where the first call wakes up the blocking __hci_cmd_sync_ev and lets it complete. However, by the time that a second __hci_cmd_sync_ev call is already in progress the second hci_req_cmd_complete call (from the previous operation) will wake up the blocking function prematurely and cause it to fail, as witnessed by the following log: [ 639.232195] hci_rx_work: hci0 Event packet [ 639.232201] hci_req_cmd_complete: opcode 0xfc8e status 0x00 [ 639.232205] hci_sent_cmd_data: hci0 opcode 0xfc8e [ 639.232210] hci_req_sync_complete: hci0 result 0x00 [ 639.232220] hci_cmd_complete_evt: hci0 opcode 0xfc8e [ 639.232225] hci_req_cmd_complete: opcode 0xfc8e status 0x00 [ 639.232228] __hci_cmd_sync_ev: hci0 end: err 0 [ 639.232234] __hci_cmd_sync_ev: hci0 [ 639.232238] hci_req_add_ev: hci0 opcode 0xfc8e plen 250 [ 639.232242] hci_prepare_cmd: skb len 253 [ 639.232246] hci_req_run: length 1 [ 639.232250] hci_sent_cmd_data: hci0 opcode 0xfc8e [ 639.232255] hci_req_sync_complete: hci0 result 0x00 [ 639.232266] hci_cmd_work: hci0 cmd_cnt 1 cmd queued 1 [ 639.232271] __hci_cmd_sync_ev: hci0 end: err 0 [ 639.232276] Bluetooth: hci0 sending Intel patch command (0xfc8e) failed (-61) Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2013-07-29Bluetooth: Fix HCI init for BlueFRITZ! devicesJohan Hedberg
None of the BlueFRITZ! devices with manufacurer ID 31 (AVM Berlin) support HCI_Read_Local_Supported_Commands. It is safe to use the manufacturer ID (instead of e.g. a USB ID specific quirk) because the company never created any newer controllers. < HCI Command: Read Local Supported Comm.. (0x04|0x0002) plen 0 [hci0] 0.210014 > HCI Event: Command Status (0x0f) plen 4 [hci0] 0.217361 Read Local Supported Commands (0x04|0x0002) ncmd 1 Status: Unknown HCI Command (0x01) Reported-by: Jörg Esser <jackfritt@boh.de> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Tested-by: Jörg Esser <jackfritt@boh.de> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2013-07-25Bluetooth: Fix race between hci_register_dev() and hci_dev_open()Gustavo Padovan
If hci_dev_open() is called after hci_register_dev() added the device to the hci_dev_list but before the workqueue are created we could run into a NULL pointer dereference (see below). This bug is very unlikely to happen, systems using bluetoothd to manage their bluetooth devices will never see this happen. BUG: unable to handle kernel NULL pointer dereference 0100 IP: [<ffffffff81077502>] __queue_work+0x32/0x3d0 (...) Call Trace: [<ffffffff81077be5>] queue_work_on+0x45/0x50 [<ffffffffa016e8ff>] hci_req_run+0xbf/0xf0 [bluetooth] [<ffffffffa01709b0>] ? hci_init2_req+0x720/0x720 [bluetooth] [<ffffffffa016ea06>] __hci_req_sync+0xd6/0x1c0 [bluetooth] [<ffffffff8108ee10>] ? try_to_wake_up+0x2b0/0x2b0 [<ffffffff8150e3f0>] ? usb_autopm_put_interface+0x30/0x40 [<ffffffffa016fad5>] hci_dev_open+0x275/0x2e0 [bluetooth] [<ffffffffa0182752>] hci_sock_ioctl+0x1f2/0x3f0 [bluetooth] [<ffffffff815c6050>] sock_do_ioctl+0x30/0x70 [<ffffffff815c75f9>] sock_ioctl+0x79/0x2f0 [<ffffffff811a8046>] do_vfs_ioctl+0x96/0x560 [<ffffffff811a85a1>] SyS_ioctl+0x91/0xb0 [<ffffffff816d989d>] system_call_fastpath+0x1a/0x1f Reported-by: Sedat Dilek <sedat.dilek@gmail.com> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2013-07-25Bluetooth: Fix invalid length check in l2cap_information_rsp()Jaganath Kanakkassery
The length check is invalid since the length varies with type of info response. This was introduced by the commit cb3b3152b2f5939d67005cff841a1ca748b19888 Because of this, l2cap info rsp is not handled and command reject is sent. > ACL data: handle 11 flags 0x02 dlen 16 L2CAP(s): Info rsp: type 2 result 0 Extended feature mask 0x00b8 Enhanced Retransmission mode Streaming mode FCS Option Fixed Channels < ACL data: handle 11 flags 0x00 dlen 10 L2CAP(s): Command rej: reason 0 Command not understood Cc: stable@vger.kernel.org Signed-off-by: Jaganath Kanakkassery <jaganath.k@samsung.com> Signed-off-by: Chan-Yeol Park <chanyeol.park@samsung.com> Acked-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2013-07-25Bluetooth: hidp: remove wrong send_report at initBenjamin Tissoires
The USB hid implementation does retrieve the reports during the start. However, this implementation does not call the HID command GET_REPORT (which would fetch the current status of each report), but use the DATA command, which is an Output Report (so transmitting data from the host to the device). The Wiimote controller is already guarded against this problem in the protocol, but it is not conformant to the specification to set all the reports to 0 on start. Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Reviewed-by: David Herrmann <dh.herrmann@gmail.com> Acked-by: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2013-07-25Bluetooth: hidp: implement hidinput_input_event callbackBenjamin Tissoires
We can re-enable hidinput_input_event to allow the leds of bluetooth keyboards to be set. Now the callbacks uses hid core to retrieve the right HID report to send, so this version is safer. Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Reviewed-by: David Herrmann <dh.herrmann@gmail.com> Acked-by: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2013-07-25Bluetooth: Add missing braces to an "else if"Gustavo Padovan
Trivial change in the coding style. Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2013-07-25Bluetooth: Use defines instead of integer literalsMikel Astiz
Replace the occurrences of integer literals in hci_event.c with the newly introduced macros in hci.h. Signed-off-by: Mikel Astiz <mikel.astiz@bmw-carit.de> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2013-07-25Bluetooth: Use defines in in hci_get_auth_req()Mikel Astiz
Make the code in hci_get_auth_req() more readable by using the defined macros instead of inlining magic numbers. Signed-off-by: Mikel Astiz <mikel.astiz@bmw-carit.de> Signed-off-by: Timo Mueller <timo.mueller@bmw-carit.de> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2013-07-25Bluetooth: Fix simple whitespace vs tab style issueMarcel Holtmann
Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2013-07-22HID: fix unused rsize usageJiri Kosina
27ce4050 ("HID: fix data access in implement()") by mistake removed a setting of buffer size in hidp. Fix that by putting it back. Reported-by: kbuild test robot <fengguang.wu@intel.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2013-07-22HID: fix data access in implement()Jiri Kosina
implement() is setting bytes in LE data stream. In case the data is not aligned to 64bits, it reads past the allocated buffer. It doesn't really change any value there (it's properly bitmasked), but in case that this read past the boundary hits a page boundary, pagefault happens when accessing 64bits of 'x' in implement(), and kernel oopses. This happens much more often when numbered reports are in use, as the initial 8bit skip in the buffer makes the whole process work on values which are not aligned to 64bits. This problem dates back to attempts in 2005 and 2006 to make implement() and extract() as generic as possible, and even back then the problem was realized by Adam Kroperlin, but falsely assumed to be impossible to cause any harm: http://www.mail-archive.com/linux-usb-devel@lists.sourceforge.net/msg47690.html I have made several attempts at fixing it "on the spot" directly in implement(), but the results were horrible; the special casing for processing last 64bit chunk and switching to different math makes it unreadable mess. I therefore took a path to allocate a few bytes more which will never make it into final report, but are there as a cushion for all the 64bit math operations happening in implement() and extract(). All callers of hid_output_report() are converted at the same time to allocate the buffer by newly introduced hid_alloc_report_buf() helper. Bruno noticed that the whole raw_size test can be dropped as well, as hid_alloc_report_buf() makes sure that the buffer is always of a proper size. Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Acked-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2013-07-15PTR_RET is now PTR_ERR_OR_ZERO(): Replace most.Rusty Russell
Sweep of the simple cases. Cc: netdev@vger.kernel.org Cc: linuxppc-dev@lists.ozlabs.org Cc: linux-arm-kernel@lists.infradead.org Cc: Julia Lawall <julia.lawall@lip6.fr> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Acked-by: David S. Miller <davem@davemloft.net> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-07-09Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-nextLinus Torvalds
Pull networking updates from David Miller: "This is a re-do of the net-next pull request for the current merge window. The only difference from the one I made the other day is that this has Eliezer's interface renames and the timeout handling changes made based upon your feedback, as well as a few bug fixes that have trickeled in. Highlights: 1) Low latency device polling, eliminating the cost of interrupt handling and context switches. Allows direct polling of a network device from socket operations, such as recvmsg() and poll(). Currently ixgbe, mlx4, and bnx2x support this feature. Full high level description, performance numbers, and design in commit 0a4db187a999 ("Merge branch 'll_poll'") From Eliezer Tamir. 2) With the routing cache removed, ip_check_mc_rcu() gets exercised more than ever before in the case where we have lots of multicast addresses. Use a hash table instead of a simple linked list, from Eric Dumazet. 3) Add driver for Atheros CQA98xx 802.11ac wireless devices, from Bartosz Markowski, Janusz Dziedzic, Kalle Valo, Marek Kwaczynski, Marek Puzyniak, Michal Kazior, and Sujith Manoharan. 4) Support reporting the TUN device persist flag to userspace, from Pavel Emelyanov. 5) Allow controlling network device VF link state using netlink, from Rony Efraim. 6) Support GRE tunneling in openvswitch, from Pravin B Shelar. 7) Adjust SOCK_MIN_RCVBUF and SOCK_MIN_SNDBUF for modern times, from Daniel Borkmann and Eric Dumazet. 8) Allow controlling of TCP quickack behavior on a per-route basis, from Cong Wang. 9) Several bug fixes and improvements to vxlan from Stephen Hemminger, Pravin B Shelar, and Mike Rapoport. In particular, support receiving on multiple UDP ports. 10) Major cleanups, particular in the area of debugging and cookie lifetime handline, to the SCTP protocol code. From Daniel Borkmann. 11) Allow packets to cross network namespaces when traversing tunnel devices. From Nicolas Dichtel. 12) Allow monitoring netlink traffic via AF_PACKET sockets, in a manner akin to how we monitor real network traffic via ptype_all. From Daniel Borkmann. 13) Several bug fixes and improvements for the new alx device driver, from Johannes Berg. 14) Fix scalability issues in the netem packet scheduler's time queue, by using an rbtree. From Eric Dumazet. 15) Several bug fixes in TCP loss recovery handling, from Yuchung Cheng. 16) Add support for GSO segmentation of MPLS packets, from Simon Horman. 17) Make network notifiers have a real data type for the opaque pointer that's passed into them. Use this to properly handle network device flag changes in arp_netdev_event(). From Jiri Pirko and Timo Teräs. 18) Convert several drivers over to module_pci_driver(), from Peter Huewe. 19) tcp_fixup_rcvbuf() can loop 500 times over loopback, just use a O(1) calculation instead. From Eric Dumazet. 20) Support setting of explicit tunnel peer addresses in ipv6, just like ipv4. From Nicolas Dichtel. 21) Protect x86 BPF JIT against spraying attacks, from Eric Dumazet. 22) Prevent a single high rate flow from overruning an individual cpu during RX packet processing via selective flow shedding. From Willem de Bruijn. 23) Don't use spinlocks in TCP md5 signing fast paths, from Eric Dumazet. 24) Don't just drop GSO packets which are above the TBF scheduler's burst limit, chop them up so they are in-bounds instead. Also from Eric Dumazet. 25) VLAN offloads are missed when configured on top of a bridge, fix from Vlad Yasevich. 26) Support IPV6 in ping sockets. From Lorenzo Colitti. 27) Receive flow steering targets should be updated at poll() time too, from David Majnemer. 28) Fix several corner case regressions in PMTU/redirect handling due to the routing cache removal, from Timo Teräs. 29) We have to be mindful of ipv4 mapped ipv6 sockets in upd_v6_push_pending_frames(). From Hannes Frederic Sowa. 30) Fix L2TP sequence number handling bugs, from James Chapman." * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1214 commits) drivers/net: caif: fix wrong rtnl_is_locked() usage drivers/net: enic: release rtnl_lock on error-path vhost-net: fix use-after-free in vhost_net_flush net: mv643xx_eth: do not use port number as platform device id net: sctp: confirm route during forward progress virtio_net: fix race in RX VQ processing virtio: support unlocked queue poll net/cadence/macb: fix bug/typo in extracting gem_irq_read_clear bit Documentation: Fix references to defunct linux-net@vger.kernel.org net/fs: change busy poll time accounting net: rename low latency sockets functions to busy poll bridge: fix some kernel warning in multicast timer sfc: Fix memory leak when discarding scattered packets sit: fix tunnel update via netlink dt:net:stmmac: Add dt specific phy reset callback support. dt:net:stmmac: Add support to dwmac version 3.610 and 3.710 dt:net:stmmac: Allocate platform data only if its NULL. net:stmmac: fix memleak in the open method ipv6: rt6_check_neigh should successfully verify neigh if no NUD information are available net: ipv6: fix wrong ping_v6_sendmsg return value ...
2013-07-04Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid Pull HID updates from Jiri Kosina: - HID battery handling cleanup by David Herrmann - ELO 4000/4500 driver, which has been finally ported to be proper HID driver by Jiri Slaby - ps3remote driver functionality is now provided by generic sony driver, by Jiri Kosina - PS2/3 Buzz controllers support, by Colin Leitner - rework of wiimote driver including full extensions hotpluggin support, sub-device modularization and speaker support by David Herrmann * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid: (55 commits) HID: wacom: Intuos4 battery charging changes HID: i2c-hid: support sending HID output reports using the output register HID: kye: Add report fixup for Genius Gila Gaming mouse HID: wiimote: support Nintendo Wii U Pro Controller Input: make gamepad API keycodes more clear input: document gamepad API and add extra keycodes HID: explain out-of-range check better HID: fix false positive out of range values HID: wiimote: fix coccinelle warnings HID: roccat: check cdev_add return value HID: fold ps3remote driver into generic Sony driver HID: hyperv: convert alloc+memcpy to memdup HID: core: fix reporting of raw events HID: wiimote: discard invalid EXT data reports HID: wiimote: fix classic controller parsing HID: wiimote: init EXT/MP during device detection HID: wiimote: fix DRM debug-attr to correctly parse input HID: wiimote: add MP quirks HID: wiimote: remove old static extension support HID: wiimote: add "bboard_calib" attribute ...
2013-07-04Merge branches 'for-3.11/battery', 'for-3.11/elo', 'for-3.11/holtek' and ↵Jiri Kosina
'for-3.11/i2c-hid-fixed' into for-linus
2013-07-03drivers: avoid format strings in names passed to alloc_workqueue()Kees Cook
For the workqueue creation interfaces that do not expect format strings, make sure they cannot accidently be parsed that way. Additionally, clean up calls made with a single parameter that would be handled as a format string. Many callers are passing potentially dynamic string content, so use "%s" in those cases to avoid any potential accidents. Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-06-26Merge branch 'master' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless
2013-06-23Bluetooth: Improve comments on the HCI_Delete_Store_Link_Key issueGustavo Padovan
Some Bluetooth controllers doesn't support this command so we first need to check for its support before sending it. This patch adds a lengthful commentary about this. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2013-06-23Bluetooth: Fix invalid length check in l2cap_information_rsp()Jaganath Kanakkassery
The length check is invalid since the length varies with type of info response. This was introduced by the commit cb3b3152b2f5939d67005cff841a1ca748b19888 Because of this, l2cap info rsp is not handled and command reject is sent. > ACL data: handle 11 flags 0x02 dlen 16 L2CAP(s): Info rsp: type 2 result 0 Extended feature mask 0x00b8 Enhanced Retransmission mode Streaming mode FCS Option Fixed Channels < ACL data: handle 11 flags 0x00 dlen 10 L2CAP(s): Command rej: reason 0 Command not understood Cc: stable@vger.kernel.org Signed-off-by: Jaganath Kanakkassery <jaganath.k@samsung.com> Signed-off-by: Chan-Yeol Park <chanyeol.park@samsung.com> Acked-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2013-06-23Bluetooth: hidp: using strlcpy instead of strncpy, also beautify code.Chen Gang
For NULL terminated string, need always let it ended by zero. Since have already called memcpy() to initialize 'ci', so need not redundant initialization. Better use ''if(session->hid) {} else if(session->input) {}"" instead of ''if(session->hid) {}; if(session->input) {};'' Signed-off-by: Chen Gang <gang.chen@asianux.com> Reviewed-by: David Herrmann <dh.herrmann@gmail.com> Acked-by: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
generated by cgit v1.2.3 (git 2.25.1) at 2024-05-17 04:12:19 +0000