aboutsummaryrefslogtreecommitdiff
path: root/net/core/dev.c
AgeCommit message (Collapse)Author
2011-12-02Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
2011-12-01net: net_device flags is an unsigned intEric Dumazet
commit b00055aacdb ([NET] core: add RFC2863 operstate) changed net_device flags from unsigned short to unsigned int. Some core functions still assume its an unsigned short. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-30net/core: fix rollback handler in register_netdevice_notifierRongQing.Li
Within nested statements, the break statement terminates only the do, for, switch, or while statement that immediately encloses it, So replace the break with goto. Signed-off-by: RongQing.Li <roy.qing.li@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-29net: Fix skb_update_prio RCU usage.Igor Maravic
Change function rcu_dereference to rcu_dereference_bh to avoid warning [ INFO: suspicious RCU usage. ] ------------------------------- net/core/dev.c:2459 suspicious rcu_dereference_check() usage! because we are locking with rcu_read_lock_bh(); in function dev_queue_xmit(struct sk_buff *skb) Signed-off-by: Igor Maravic <igorm@etf.rs> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-29bql: Byte queue limitsTom Herbert
Networking stack support for byte queue limits, uses dynamic queue limits library. Byte queue limits are maintained per transmit queue, and a dql structure has been added to netdev_queue structure for this purpose. Configuration of bql is in the tx-<n> sysfs directory for the queue under the byte_queue_limits directory. Configuration includes: limit_min, bql minimum limit limit_max, bql maximum limit hold_time, bql slack hold time Also under the directory are: limit, current byte limit inflight, current number of bytes on the queue Signed-off-by: Tom Herbert <therbert@google.com> Acked-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-29net: Add queue state xoff flag for stackTom Herbert
Create separate queue state flags so that either the stack or drivers can turn on XOFF. Added a set of functions used in the stack to determine if a queue is really stopped (either by stack or driver) Signed-off-by: Tom Herbert <therbert@google.com> Acked-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-29net: dont call jump_label_dec from irq contextEric Dumazet
Igor Maravic reported an error caused by jump_label_dec() being called from IRQ context : BUG: sleeping function called from invalid context at kernel/mutex.c:271 in_atomic(): 1, irqs_disabled(): 0, pid: 0, name: swapper 1 lock held by swapper/0: #0: (&n->timer){+.-...}, at: [<ffffffff8107ce90>] call_timer_fn+0x0/0x340 Pid: 0, comm: swapper Not tainted 3.2.0-rc2-net-next-mpls+ #1 Call Trace: <IRQ> [<ffffffff8104f417>] __might_sleep+0x137/0x1f0 [<ffffffff816b9a2f>] mutex_lock_nested+0x2f/0x370 [<ffffffff810a89fd>] ? trace_hardirqs_off+0xd/0x10 [<ffffffff8109a37f>] ? local_clock+0x6f/0x80 [<ffffffff810a90a5>] ? lock_release_holdtime.part.22+0x15/0x1a0 [<ffffffff81557929>] ? sock_def_write_space+0x59/0x160 [<ffffffff815e936e>] ? arp_error_report+0x3e/0x90 [<ffffffff810969cd>] atomic_dec_and_mutex_lock+0x5d/0x80 [<ffffffff8112fc1d>] jump_label_dec+0x1d/0x50 [<ffffffff81566525>] net_disable_timestamp+0x15/0x20 [<ffffffff81557a75>] sock_disable_timestamp+0x45/0x50 [<ffffffff81557b00>] __sk_free+0x80/0x200 [<ffffffff815578d0>] ? sk_send_sigurg+0x70/0x70 [<ffffffff815e936e>] ? arp_error_report+0x3e/0x90 [<ffffffff81557cba>] sock_wfree+0x3a/0x70 [<ffffffff8155c2b0>] skb_release_head_state+0x70/0x120 [<ffffffff8155c0b6>] __kfree_skb+0x16/0x30 [<ffffffff8155c119>] kfree_skb+0x49/0x170 [<ffffffff815e936e>] arp_error_report+0x3e/0x90 [<ffffffff81575bd9>] neigh_invalidate+0x89/0xc0 [<ffffffff81578dbe>] neigh_timer_handler+0x9e/0x2a0 [<ffffffff81578d20>] ? neigh_update+0x640/0x640 [<ffffffff81073558>] __do_softirq+0xc8/0x3a0 Since jump_label_{inc|dec} must be called from process context only, we must defer jump_label_dec() if net_disable_timestamp() is called from interrupt context. Reported-by: Igor Maravic <igorm@etf.rs> Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-28net: use skb_flow_dissect() in __skb_get_rxhash()Eric Dumazet
No functional changes. This uses the code we factorized in skb_flow_dissect() Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-28net: Fix corruption in /proc/*/net/dev_mcastAnton Blanchard
I just hit this during my testing. Isn't there another bug lurking? BUG kmalloc-8: Redzone overwritten INFO: 0xc0000000de9dec48-0xc0000000de9dec4b. First byte 0x0 instead of 0xcc INFO: Allocated in .__seq_open_private+0x30/0xa0 age=0 cpu=5 pid=3896 .__kmalloc+0x1e0/0x2d0 .__seq_open_private+0x30/0xa0 .seq_open_net+0x60/0xe0 .dev_mc_seq_open+0x4c/0x70 .proc_reg_open+0xd8/0x260 .__dentry_open.clone.11+0x2b8/0x400 .do_last+0xf4/0x950 .path_openat+0xf8/0x480 .do_filp_open+0x48/0xc0 .do_sys_open+0x140/0x250 syscall_exit+0x0/0x40 dev_mc_seq_ops uses dev_seq_start/next/stop but only allocates sizeof(struct seq_net_private) of private data, whereas it expects sizeof(struct dev_iter_state): struct dev_iter_state { struct seq_net_private p; unsigned int pos; /* bucket << BUCKET_SPACE + offset */ }; Create dev_seq_open_ops and use it so we don't have to expose struct dev_iter_state. [ Problem added by commit f04565ddf52e4 (dev: use name hash for dev_seq_ops) -Eric ] Signed-off-by: Anton Blanchard <anton@samba.org> Acked-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-22net: add network priority cgroup infrastructure (v4)Neil Horman
This patch adds in the infrastructure code to create the network priority cgroup. The cgroup, in addition to the standard processes file creates two control files: 1) prioidx - This is a read-only file that exports the index of this cgroup. This is a value that is both arbitrary and unique to a cgroup in this subsystem, and is used to index the per-device priority map 2) priomap - This is a writeable file. On read it reports a table of 2-tuples <name:priority> where name is the name of a network interface and priority is indicates the priority assigned to frames egresessing on the named interface and originating from a pid in this cgroup This cgroup allows for skb priority to be set prior to a root qdisc getting selected. This is benenficial for DCB enabled systems, in that it allows for any application to use dcb configured priorities so without application modification Signed-off-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: John Fastabend <john.r.fastabend@intel.com> CC: Robert Love <robert.w.love@intel.com> CC: "David S. Miller" <davem@davemloft.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-17net: use jump_label to shortcut RPS if not setupEric Dumazet
Most machines dont use RPS/RFS, and pay a fair amount of instructions in netif_receive_skb() / netif_rx() / get_rps_cpu() just to discover RPS/RFS is not setup. Add a jump_label named rps_needed. If no device rps_map or global rps_sock_flow_table is setup, netif_receive_skb() / netif_rx() do a single instruction instead of many ones, including conditional jumps. jmp +0 (if CONFIG_JUMP_LABEL=y) Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> CC: Tom Herbert <therbert@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-16net: remove NETIF_F_NO_CSUM feature bitMichał Mirosław
Only distinct use is checking if NETIF_F_NOCACHE_COPY should be enabled by default. The check heuristics is altered a bit here, so it hits other people than before. The default shouldn't be trusted for performance-critical cases anyway. For all other uses NETIF_F_NO_CSUM is equivalent to NETIF_F_HW_CSUM. Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-16net: introduce and use netdev_features_t for device features setsMichał Mirosław
v2: add couple missing conversions in drivers split unexporting netdev_fix_features() implemented %pNF convert sock::sk_route_(no?)caps Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-16net: remove legacy ethtool opsMichał Mirosław
As all drivers are converted, we may now remove discrete offload setting callback handling. Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Acked-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-16net: use jump_label for netstamp_neededEric Dumazet
netstamp_needed seems a good candidate to jump_label conversion. This avoids 3 conditional branches per incoming packet in fast path. No measurable difference, given that these conditional branches are predicted on modern cpus. Only a small icache reduction, thanks to the unlikely() stuff. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-10-30vlan: allow nested vlan_do_receive()Eric Dumazet
commit 2425717b27eb (net: allow vlan traffic to be received under bond) broke ARP processing on vlan on top of bonding. +-------+ eth0 --| bond0 |---bond0.103 eth1 --| | +-------+ 52870.115435: skb_gro_reset_offset <-napi_gro_receive 52870.115435: dev_gro_receive <-napi_gro_receive 52870.115435: napi_skb_finish <-napi_gro_receive 52870.115435: netif_receive_skb <-napi_skb_finish 52870.115435: get_rps_cpu <-netif_receive_skb 52870.115435: __netif_receive_skb <-netif_receive_skb 52870.115436: vlan_do_receive <-__netif_receive_skb 52870.115436: bond_handle_frame <-__netif_receive_skb 52870.115436: vlan_do_receive <-__netif_receive_skb 52870.115436: arp_rcv <-__netif_receive_skb 52870.115436: kfree_skb <-arp_rcv Packet is dropped in arp_rcv() because its pkt_type was set to PACKET_OTHERHOST in the first vlan_do_receive() call, since no eth0.103 exists. We really need to change pkt_type only if no more rx_handler is about to be called for the packet. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Reviewed-by: Jiri Pirko <jpirko@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-10-25Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-nextLinus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1745 commits) dp83640: free packet queues on remove dp83640: use proper function to free transmit time stamping packets ipv6: Do not use routes from locally generated RAs |PATCH net-next] tg3: add tx_dropped counter be2net: don't create multiple RX/TX rings in multi channel mode be2net: don't create multiple TXQs in BE2 be2net: refactor VF setup/teardown code into be_vf_setup/clear() be2net: add vlan/rx-mode/flow-control config to be_setup() net_sched: cls_flow: use skb_header_pointer() ipv4: avoid useless call of the function check_peer_pmtu TCP: remove TCP_DEBUG net: Fix driver name for mdio-gpio.c ipv4: tcp: fix TOS value in ACK messages sent from TIME_WAIT rtnetlink: Add missing manual netlink notification in dev_change_net_namespaces ipv4: fix ipsec forward performance regression jme: fix irq storm after suspend/resume route: fix ICMP redirect validation net: hold sock reference while processing tx timestamps tcp: md5: add more const attributes Add ethtool -g support to virtio_net ... Fix up conflicts in: - drivers/net/Kconfig: The split-up generated a trivial conflict with removal of a stale reference to Documentation/networking/net-modules.txt. Remove it from the new location instead. - fs/sysfs/dir.c: Fairly nasty conflicts with the sysfs rb-tree usage, conflicting with Eric Biederman's changes for tagged directories.
2011-10-25Merge branch 'driver-core-next' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core * 'driver-core-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (38 commits) mm: memory hotplug: Check if pages are correctly reserved on a per-section basis Revert "memory hotplug: Correct page reservation checking" Update email address for stable patch submission dynamic_debug: fix undefined reference to `__netdev_printk' dynamic_debug: use a single printk() to emit messages dynamic_debug: remove num_enabled accounting dynamic_debug: consolidate repetitive struct _ddebug descriptor definitions uio: Support physical addresses >32 bits on 32-bit systems sysfs: add unsigned long cast to prevent compile warning drivers: base: print rejected matches with DEBUG_DRIVER memory hotplug: Correct page reservation checking memory hotplug: Refuse to add unaligned memory regions remove the messy code file Documentation/zh_CN/SubmitChecklist ARM: mxc: convert device creation to use platform_device_register_full new helper to create platform devices with dma mask docs/driver-model: Update device class docs docs/driver-model: Document device.groups kobj_uevent: Ignore if some listeners cannot handle message dynamic_debug: make netif_dbg() call __netdev_printk() dynamic_debug: make netdev_dbg() call __netdev_printk() ...
2011-10-24Merge branch 'master' of ra.kernel.org:/pub/scm/linux/kernel/git/davem/netDavid S. Miller
2011-10-24rtnetlink: Add missing manual netlink notification in dev_change_net_namespacesEric W. Biederman
Renato Westphal noticed that since commit a2835763e130c343ace5320c20d33c281e7097b7 "rtnetlink: handle rtnl_link netlink notifications manually" was merged we no longer send a netlink message when a networking device is moved from one network namespace to another. Fix this by adding the missing manual notification in dev_change_net_namespaces. Since all network devices that are processed by dev_change_net_namspaces are in the initialized state the complicated tests that guard the manual rtmsg_ifinfo calls in rollback_registered and register_netdevice are unnecessary and we can just perform a plain notification. Cc: stable@kernel.org Tested-by: Renato Westphal <renatowestphal@gmail.com> Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-10-21dev: use name hash for dev_seq_opsMihai Maruseac
Instead of using the dev->next chain and trying to resync at each call to dev_seq_start, use the name hash, keeping the bucket and the offset in seq->private field. Tests revealed the following results for ifconfig > /dev/null * 1000 interfaces: * 0.114s without patch * 0.089s with patch * 3000 interfaces: * 0.489s without patch * 0.110s with patch * 5000 interfaces: * 1.363s without patch * 0.250s with patch * 128000 interfaces (other setup): * ~100s without patch * ~30s with patch Signed-off-by: Mihai Maruseac <mmaruseac@ixiacom.com> Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-10-19net: validate HWTSTAMP ioctl parametersRichard Cochran
This patch adds a sanity check on the values provided by user space for the hardware time stamping configuration. If the values lie outside of the absolute limits, then the ioctl request will be denied. Signed-off-by: Richard Cochran <richard.cochran@omicron.at> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-10-19net: Move rcu_barrier from rollback_registered_many to netdev_run_todo.Eric W. Biederman
This patch moves the rcu_barrier from rollback_registered_many (inside the rtnl_lock) into netdev_run_todo (just outside the rtnl_lock). This allows us to gain the full benefit of sychronize_net calling synchronize_rcu_expedited when the rtnl_lock is held. The rcu_barrier in rollback_registered_many was originally a synchronize_net but was promoted to be a rcu_barrier() when it was found that people were unnecessarily hitting the 250ms wait in netdev_wait_allrefs(). Changing the rcu_barrier back to a synchronize_net is therefore safe. Since we only care about waiting for the rcu callbacks before we get to netdev_wait_allrefs() it is also safe to move the wait into netdev_run_todo. This was tested by creating and destroying 1000 tap devices and observing /proc/lock_stat. /proc/lock_stat reports this change reduces the hold times of the rtnl_lock by a factor of 10. There was no observable difference in the amount of time it takes to destroy a network device. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-10-19net: add skb frag size accessorsEric Dumazet
To ease skb->truesize sanitization, its better to be able to localize all references to skb frags size. Define accessors : skb_frag_size() to fetch frag size, and skb_frag_size_{set|add|sub}() to manipulate it. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-10-18net: allow vlan traffic to be received under bondJohn Fastabend
The following configuration used to work as I expected. At least we could use the fcoe interfaces to do MPIO and the bond0 iface to do load balancing or failover. ---eth2.228-fcoe | eth2 -----| | |---- bond0 | eth3 -----| | ---eth3.228-fcoe This worked because of a change we added to allow inactive slaves to rx 'exact' matches. This functionality was kept intact with the rx_handler mechanism. However now the vlan interface attached to the active slave never receives traffic because the bonding rx_handler updates the skb->dev and goto's another_round. Previously, the vlan_do_receive() logic was called before the bonding rx_handler. Now by the time vlan_do_receive calls vlan_find_dev() the skb->dev is set to bond0 and it is clear no vlan is attached to this iface. The vlan lookup fails. This patch moves the VLAN check above the rx_handler. A VLAN tagged frame is now routed to the eth2.228-fcoe iface in the above schematic. Untagged frames continue to the bond0 as normal. This case also remains intact, eth2 --> bond0 --> vlan.228 Here the skb is VLAN tagged but the vlan lookup fails on eth2 causing the bonding rx_handler to be called. On the second pass the vlan lookup is on the bond0 iface and completes as expected. Putting a VLAN.228 on both the bond0 and eth2 device will result in eth2.228 receiving the skb. I don't think this is completely unexpected and was the result prior to the rx_handler result. Note, the same setup is also used for other storage traffic that MPIO is used with eg. iSCSI and similar setups can be contrived without storage protocols. Signed-off-by: John Fastabend <john.r.fastabend@intel.com> Acked-by: Jesse Gross <jesse@nicira.com> Reviewed-by: Jiri Pirko <jpirko@redhat.com> Tested-by: Hans Schillstrom <hams.schillstrom@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-10-03RPS: Ensure that an expired hardware filter can be re-added laterBen Hutchings
Amir Vadai wrote: > When a stream is paused, and its rule is expired while it is paused, > no new rule will be configured to the HW when traffic resume. [...] > - When stream was resumed, traffic was steered again by RSS, and > because current-cpu was equal to desired-cpu, ndo_rx_flow_steer > wasn't called and no rule was configured to the HW. Fix this by setting the flow's current CPU only in the table for the newly selected RX queue. Reported-and-tested-by: Amir Vadai <amirv@dev.mellanox.co.il> Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-09-28net: rps: fix the support for PPPOEChangli Gao
The upper protocol numbers of PPPOE are different, and should be treated specially. Signed-off-by: Changli Gao <xiaosuo@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-09-22Merge branch 'master' of github.com:davem330/netDavid S. Miller
Conflicts: MAINTAINERS drivers/net/Kconfig drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c drivers/net/ethernet/broadcom/tg3.c drivers/net/wireless/iwlwifi/iwl-pci.c drivers/net/wireless/iwlwifi/iwl-trans-tx-pcie.c drivers/net/wireless/rt2x00/rt2800usb.c drivers/net/wireless/wl12xx/main.c
2011-09-15net: consolidate and fix ethtool_ops->get_settings callingJiri Pirko
This patch does several things: - introduces __ethtool_get_settings which is called from ethtool code and from drivers as well. Put ASSERT_RTNL there. - dev_ethtool_get_settings() is replaced by __ethtool_get_settings() - changes calling in drivers so rtnl locking is respected. In iboe_get_rate was previously ->get_settings() called unlocked. This fixes it. Also prb_calc_retire_blk_tmo() in af_packet.c had the same problem. Also fixed by calling __dev_get_by_index() instead of dev_get_by_index() and holding rtnl_lock for both calls. - introduces rtnl_lock in bnx2fc_vport_create() and fcoe_vport_create() so bnx2fc_if_create() and fcoe_if_create() are called locked as they are from other places. - use __ethtool_get_settings() in bonding code Signed-off-by: Jiri Pirko <jpirko@redhat.com> v2->v3: -removed dev_ethtool_get_settings() -added ASSERT_RTNL into __ethtool_get_settings() -prb_calc_retire_blk_tmo - use __dev_get_by_index() and lock around it and __ethtool_get_settings() call v1->v2: add missing export_symbol Reviewed-by: Ben Hutchings <bhutchings@solarflare.com> [except FCoE bits] Acked-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-09-15net: copy userspace buffers on device forwardingMichael S. Tsirkin
dev_forward_skb loops an skb back into host networking stack which might hang on the memory indefinitely. In particular, this can happen in macvtap in bridged mode. Copy the userspace fragments to avoid blocking the sender in that case. As this patch makes skb_copy_ubufs extern now, I also added some documentation and made it clear the SKBTX_DEV_ZEROCOPY flag automatically instead of doing it in all callers. This can be made into a separate patch if people feel it's worth it. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-08-24net: convert core to skb paged frag APIsIan Campbell
Signed-off-by: Ian Campbell <ian.campbell@citrix.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Eric Dumazet <eric.dumazet@gmail.com> Cc: "Michał Mirosław" <mirq-linux@rere.qmqm.pl> Cc: netdev@vger.kernel.org Signed-off-by: David S. Miller <davem@davemloft.net>
2011-08-24rps: support IPIP encapsulationEric Dumazet
Skip IPIP header to get proper layer-4 information. Like GRE tunnels, this only works if rxhash is not already provided by the device itself (ethtool -K ethX rxhash off), to allow kernel compute a software rxhash. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-08-22dynamic_debug: make netdev_dbg() call __netdev_printk()Jason Baron
Previously, if dynamic debug was enabled netdev_dbg() was using dynamic_dev_dbg() to print out the underlying msg. Fix this by making sure netdev_dbg() uses __netdev_printk(). Cc: David S. Miller <davem@davemloft.net> Signed-off-by: Jason Baron <jbaron@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-08-22net: vlan: goto another_round instead of calling __netif_receive_skbJiri Pirko
Now, when vlan tag on untagged in non-accelerated path is stripped from skb, headers are reset right away. Benefit from that and avoid calling __netif_receive_skb recursivelly and just use another_round. Signed-off-by: Jiri Pirko <jpirko@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-08-18net: rps: support PPPOE session messagesChangli Gao
Inspect the payload of PPPOE session messages for the 4 tuples to generate skb->rxhash. Signed-off-by: Changli Gao <xiaosuo@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-08-18net: rps: support 802.1QChangli Gao
For the 802.1Q packets, if the NIC doesn't support hw-accel-vlan-rx, RPS won't inspect the internal 4 tuples to generate skb->rxhash, so this kind of traffic can't get any benefit from RPS. This patch adds the support for 802.1Q to RPS. Signed-off-by: Changli Gao <xiaosuo@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-08-17net: remove ndo_set_multicast_list callbackJiri Pirko
Remove no longer used operation. Signed-off-by: Jiri Pirko <jpirko@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-08-17net: introduce IFF_UNICAST_FLT private flagJiri Pirko
Use IFF_UNICAST_FTL to find out if driver handles unicast address filtering. In case it does not, promisc mode is entered. Patch also fixes following drivers: stmmac, niu: support uc filtering and yet it propagated ndo_set_multicast_list bna, benet, pxa168_eth, ks8851, ks8851_mll, ksz884x : has set ndo_set_rx_mode but do not support uc filtering Signed-off-by: Jiri Pirko <jpirko@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-08-17rps: Inspect GRE encapsulated packets to get flow hashTom Herbert
Crack open GRE packets in __skb_get_rxhash to compute 4-tuple hash on in encapsulated packet. Note that this is used only when the __skb_get_rxhash is taken, in particular only when the device does not compute provide the rxhash (ie. feature is disabled). This was tested by creating a single GRE tunnel between two 16 core AMD machines. 200 netperf TCP_RR streams were ran with 1 byte request and response size. Without patch: 157497 tps, 50/90/99% latencies 1250/1292/1364 usecs With patch: 325896 tps, 50/90/99% latencies 603/848/1169 Signed-off-by: Tom Herbert <therbert@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-08-17rps: Infrastructure in __skb_get_rxhash for deep inspectionTom Herbert
Basics for looking for ports in encapsulated packets in tunnels. Signed-off-by: Tom Herbert <therbert@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-08-17rps: Add flag to skb to indicate rxhash is based on L4 tupleTom Herbert
The l4_rxhash flag was added to the skb structure to indicate that the rxhash value was computed over the 4 tuple for the packet which includes the port information in the encapsulated transport packet. This is used by the stack to preserve the rxhash value in __skb_rx_tunnel. Signed-off-by: Tom Herbert <therbert@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-08-17rps: Some minor cleanup in get_rps_cpusTom Herbert
Use some variables for clarity and extensibility. Signed-off-by: Tom Herbert <therbert@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-08-12net: cleanup some rcu_dereference_rawEric Dumazet
RCU api had been completed and rcu_access_pointer() or rcu_dereference_protected() are better than generic rcu_dereference_raw() Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-08-02rcu: convert uses of rcu_assign_pointer(x, NULL) to RCU_INIT_POINTERStephen Hemminger
When assigning a NULL value to an RCU protected pointer, no barrier is needed. The rcu_assign_pointer, used to handle that but will soon change to not handle the special case. Convert all rcu_assign_pointer of NULL value. //smpl @@ expression P; @@ - rcu_assign_pointer(P, NULL) + RCU_INIT_POINTER(P, NULL) // </smpl> Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-25net: Convert struct net_device uc_promisc to boolJoe Perches
No need to use int, its uses are boolean. May save a few bytes one day. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-14net: unexport netdev_fix_features()Michał Mirosław
It is not used anywhere except net/core/dev.c now. Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-14net: cleanup vlan_features setting in register_netdevMichał Mirosław
vlan_features contains features inherited from underlying device. NETIF_SOFT_FEATURES are not inherited but belong to the vlan device itself (ensured in vlan_dev_fix_features()). Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-05net: Add GSO to vlan_features initializationShan Wei
Just add GSO to vlan_features initialization, and update comments. When we set offload features, vlan_dev_fix_features() will do more check. In vlan_dev_fix_features(), final features is decided by features of real device and vlan_features of real device. Signed-off-by: Shan Wei <shanwei@cn.fujitsu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-01rtnl: provide link dump consistency infoThomas Graf
This patch adds a change sequence counter to each net namespace which is bumped whenever a netdevice is added or removed from the list. If such a change occurred while a link dump took place, the dump will have the NLM_F_DUMP_INTR flag set in the first message which has been interrupted and in all subsequent messages of the same dump. Note that links may still be modified or renamed while a dump is taking place but we can guarantee for userspace to receive a complete list of links and not miss any. Testing: I have added 500 VLAN netdevices to make sure the dump is split over multiple messages. Then while continuously dumping links in one process I also continuously deleted and re-added a dummy netdevice in another process. Multiple dumps per seconds have had the NLM_F_DUMP_INTR flag set. I guess we can wait for Johannes patch to hit net-next via the wireless tree. I just wanted to give this some testing right away. Signed-off-by: Thomas Graf <tgraf@infradead.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-06-21ip: introduce ip_is_fragment helper inline functionPaul Gortmaker
There are enough instances of this: iph->frag_off & htons(IP_MF | IP_OFFSET) that a helper function is probably warranted. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.25.1) at 2024-06-07 19:00:38 +0000