aboutsummaryrefslogtreecommitdiff
path: root/net/ipv4
AgeCommit message (Collapse)Author
2014-01-15net: inet_diag: zero out uninitialized idiag_{src,dst} fieldsDaniel Borkmann
[ Upstream commit b1aac815c0891fe4a55a6b0b715910142227700f ] Jakub reported while working with nlmon netlink sniffer that parts of the inet_diag_sockid are not initialized when r->idiag_family != AF_INET6. That is, fields of r->id.idiag_src[1 ... 3], r->id.idiag_dst[1 ... 3]. In fact, it seems that we can leak 6 * sizeof(u32) byte of kernel [slab] memory through this. At least, in udp_dump_one(), we allocate a skb in ... rep = nlmsg_new(sizeof(struct inet_diag_msg) + ..., GFP_KERNEL); ... and then pass that to inet_sk_diag_fill() that puts the whole struct inet_diag_msg into the skb, where we only fill out r->id.idiag_src[0], r->id.idiag_dst[0] and leave the rest untouched: r->id.idiag_src[0] = inet->inet_rcv_saddr; r->id.idiag_dst[0] = inet->inet_daddr; struct inet_diag_msg embeds struct inet_diag_sockid that is correctly / fully filled out in IPv6 case, but for IPv4 not. So just zero them out by using plain memset (for this little amount of bytes it's probably not worth the extra check for idiag_family == AF_INET). Similarly, fix also other places where we fill that out. Reported-by: Jakub Zawadzki <darkjames-ws@darkjames.pl> Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-01-15ip_gre: fix msg_name parsing for recvfrom/recvmsgTimo Teräs
[ Upstream commit 0e3da5bb8da45890b1dc413404e0f978ab71173e ] ipgre_header_parse() needs to parse the tunnel's ip header and it uses mac_header to locate the iphdr. This got broken when gre tunneling was refactored as mac_header is no longer updated to point to iphdr. Introduce skb_pop_mac_header() helper to do the mac_header assignment and use it in ipgre_rcv() to fix msg_name parsing. Bug introduced in commit c54419321455 (GRE: Refactor GRE tunneling code.) Cc: Pravin B Shelar <pshelar@nicira.com> Signed-off-by: Timo Teräs <timo.teras@iki.fi> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-12-20Revert "net: update consumers of MSG_MORE to recognize MSG_SENDPAGE_NOTLAST"Greg Kroah-Hartman
It turns out that commit: d3f7d56a7a4671d395e8af87071068a195257bf6 was applied to the tree twice, which didn't hurt anything, but it's good to fix this up. Reported-by: Veaceslav Falico <veaceslav@falico.eu> Cc: David S. Miller <davem@davemloft.net> Cc: Eric Dumazet <eric.dumazet@gmail.com> Cc: Richard Weinberger <richard@nod.at> Cc: Shawn Landden <shawnlandden@gmail.com> Cc: Tom Herbert <therbert@google.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-12-11net: update consumers of MSG_MORE to recognize MSG_SENDPAGE_NOTLASTShawn Landden
commit d3f7d56a7a4671d395e8af87071068a195257bf6 upstream. Commit 35f9c09fe (tcp: tcp_sendpages() should call tcp_push() once) added an internal flag MSG_SENDPAGE_NOTLAST, similar to MSG_MORE. algif_hash, algif_skcipher, and udp used MSG_MORE from tcp_sendpages() and need to see the new flag as identical to MSG_MORE. This fixes sendfile() on AF_ALG. v3: also fix udp Cc: Tom Herbert <therbert@google.com> Cc: Eric Dumazet <eric.dumazet@gmail.com> Cc: David S. Miller <davem@davemloft.net> Reported-and-tested-by: Shawn Landden <shawnlandden@gmail.com> Original-patch: Richard Weinberger <richard@nod.at> Signed-off-by: Shawn Landden <shawn@churchofgit.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-12-08tcp: gso: fix truesize trackingEric Dumazet
[ Upstream commit 0d08c42cf9a71530fef5ebcfe368f38f2dd0476f ] commit 6ff50cd55545 ("tcp: gso: do not generate out of order packets") had an heuristic that can trigger a warning in skb_try_coalesce(), because skb->truesize of the gso segments were exactly set to mss. This breaks the requirement that skb->truesize >= skb->len + truesizeof(struct sk_buff); It can trivially be reproduced by : ifconfig lo mtu 1500 ethtool -K lo tso off netperf As the skbs are looped into the TCP networking stack, skb_try_coalesce() warns us of these skb under-estimating their truesize. Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-12-08inet: fix possible seqlock deadlocksEric Dumazet
[ Upstream commit f1d8cba61c3c4b1eb88e507249c4cb8d635d9a76 ] In commit c9e9042994d3 ("ipv4: fix possible seqlock deadlock") I left another places where IP_INC_STATS_BH() were improperly used. udp_sendmsg(), ping_v4_sendmsg() and tcp_v4_connect() are called from process context, not from softirq context. This was detected by lockdep seqlock support. Reported-by: jongman heo <jongman.heo@samsung.com> Fixes: 584bdf8cbdf6 ("[IPV4]: Fix "ipOutNoRoutes" counter error for TCP and UDP") Fixes: c319b4d76b9e ("net: ipv4: add IPPROTO_ICMP socket kind") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Hannes Frederic Sowa <hannes@stressinduktion.org> Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-12-08net: update consumers of MSG_MORE to recognize MSG_SENDPAGE_NOTLASTShawn Landden
[ Upstream commit d3f7d56a7a4671d395e8af87071068a195257bf6 ] Commit 35f9c09fe (tcp: tcp_sendpages() should call tcp_push() once) added an internal flag MSG_SENDPAGE_NOTLAST, similar to MSG_MORE. algif_hash, algif_skcipher, and udp used MSG_MORE from tcp_sendpages() and need to see the new flag as identical to MSG_MORE. This fixes sendfile() on AF_ALG. v3: also fix udp Reported-and-tested-by: Shawn Landden <shawnlandden@gmail.com> Cc: Tom Herbert <therbert@google.com> Cc: Eric Dumazet <eric.dumazet@gmail.com> Cc: David S. Miller <davem@davemloft.net> Original-patch: Richard Weinberger <richard@nod.at> Signed-off-by: Shawn Landden <shawn@churchofgit.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-12-08ipv4: fix race in concurrent ip_route_input_slow()Alexei Starovoitov
[ Upstream commit dcdfdf56b4a6c9437fc37dbc9cee94a788f9b0c4 ] CPUs can ask for local route via ip_route_input_noref() concurrently. if nh_rth_input is not cached yet, CPUs will proceed to allocate equivalent DSTs on 'lo' and then will try to cache them in nh_rth_input via rt_cache_route() Most of the time they succeed, but on occasion the following two lines: orig = *p; prev = cmpxchg(p, orig, rt); in rt_cache_route() do race and one of the cpus fails to complete cmpxchg. But ip_route_input_slow() doesn't check the return code of rt_cache_route(), so dst is leaking. dst_destroy() is never called and 'lo' device refcnt doesn't go to zero, which can be seen in the logs as: unregister_netdevice: waiting for lo to become free. Usage count = 1 Adding mdelay() between above two lines makes it easily reproducible. Fix it similar to nh_pcpu_rth_output case. Fixes: d2d68ba9fe8b ("ipv4: Cache input routes in fib_info nexthops.") Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-12-08tcp: don't update snd_nxt, when a socket is switched from repair modeAndrey Vagin
[ Upstream commit dbde497966804e63a38fdedc1e3815e77097efc2 ] snd_nxt must be updated synchronously with sk_send_head. Otherwise tp->packets_out may be updated incorrectly, what may bring a kernel panic. Here is a kernel panic from my host. [ 103.043194] BUG: unable to handle kernel NULL pointer dereference at 0000000000000048 [ 103.044025] IP: [<ffffffff815aaaaf>] tcp_rearm_rto+0xcf/0x150 ... [ 146.301158] Call Trace: [ 146.301158] [<ffffffff815ab7f0>] tcp_ack+0xcc0/0x12c0 Before this panic a tcp socket was restored. This socket had sent and unsent data in the write queue. Sent data was restored in repair mode, then the socket was switched from reapair mode and unsent data was restored. After that the socket was switched back into repair mode. In that moment we had a socket where write queue looks like this: snd_una snd_nxt write_seq |_________|________| | sk_send_head After a second switching from repair mode the state of socket was changed: snd_una snd_nxt, write_seq |_________ ________| | sk_send_head This state is inconsistent, because snd_nxt and sk_send_head are not synchronized. Bellow you can find a call trace, how packets_out can be incremented twice for one skb, if snd_nxt and sk_send_head are not synchronized. In this case packets_out will be always positive, even when sk_write_queue is empty. tcp_write_wakeup skb = tcp_send_head(sk); tcp_fragment if (!before(tp->snd_nxt, TCP_SKB_CB(buff)->end_seq)) tcp_adjust_pcount(sk, skb, diff); tcp_event_new_data_sent tp->packets_out += tcp_skb_pcount(skb); I think update of snd_nxt isn't required, when a socket is switched from repair mode. Because it's initialized in tcp_connect_init. Then when a write queue is restored, snd_nxt is incremented in tcp_event_new_data_sent, so it's always is in consistent state. I have checked, that the bug is not reproduced with this patch and all tests about restoring tcp connections work fine. Signed-off-by: Andrey Vagin <avagin@openvz.org> Cc: Pavel Emelyanov <xemul@parallels.com> Cc: Eric Dumazet <edumazet@google.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Alexey Kuznetsov <kuznet@ms2.inr.ac.ru> Cc: James Morris <jmorris@namei.org> Cc: Hideaki YOSHIFUJI <yoshfuji@linux-ipv6.org> Cc: Patrick McHardy <kaber@trash.net> Acked-by: Pavel Emelyanov <xemul@parallels.com> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-12-08xfrm: Release dst if this dst is improper for vti tunnelfan.du
[ Upstream commit 236c9f84868534c718b6889aa624de64763281f9 ] After searching rt by the vti tunnel dst/src parameter, if this rt has neither attached to any transformation nor the transformation is not tunnel oriented, this rt should be released back to ip layer. otherwise causing dst memory leakage. Signed-off-by: Fan Du <fan.du@windriver.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-12-08inet: fix addr_len/msg->msg_namelen assignment in recv_error and rxpmtu ↵Hannes Frederic Sowa
functions [ Upstream commit 85fbaa75037d0b6b786ff18658ddf0b4014ce2a4 ] Commit bceaa90240b6019ed73b49965eac7d167610be69 ("inet: prevent leakage of uninitialized memory to user in recv syscalls") conditionally updated addr_len if the msg_name is written to. The recv_error and rxpmtu functions relied on the recvmsg functions to set up addr_len before. As this does not happen any more we have to pass addr_len to those functions as well and set it to the size of the corresponding sockaddr length. This broke traceroute and such. Fixes: bceaa90240b6 ("inet: prevent leakage of uninitialized memory to user in recv syscalls") Reported-by: Brad Spengler <spender@grsecurity.net> Reported-by: Tom Labanowski Cc: mpb <mpb.mail@gmail.com> Cc: David S. Miller <davem@davemloft.net> Cc: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-12-08inet: prevent leakage of uninitialized memory to user in recv syscallsHannes Frederic Sowa
[ Upstream commit bceaa90240b6019ed73b49965eac7d167610be69 ] Only update *addr_len when we actually fill in sockaddr, otherwise we can return uninitialized memory from the stack to the caller in the recvfrom, recvmmsg and recvmsg syscalls. Drop the the (addr_len == NULL) checks because we only get called with a valid addr_len pointer either from sock_common_recvmsg or inet_recvmsg. If a blocking read waits on a socket which is concurrently shut down we now return zero and set msg_msgnamelen to 0. Reported-by: mpb <mpb.mail@gmail.com> Suggested-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-12-08ipv4: fix possible seqlock deadlockEric Dumazet
[ Upstream commit c9e9042994d37cbc1ee538c500e9da1bb9d1bcdf ] ip4_datagram_connect() being called from process context, it should use IP_INC_STATS() instead of IP_INC_STATS_BH() otherwise we can deadlock on 32bit arches, or get corruptions of SNMP counters. Fixes: 584bdf8cbdf6 ("[IPV4]: Fix "ipOutNoRoutes" counter error for TCP and UDP") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: Dave Jones <davej@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-12-08net-tcp: fix panic in tcp_fastopen_cache_set()Eric Dumazet
[ Upstream commit dccf76ca6b626c0c4a4e09bb221adee3270ab0ef ] We had some reports of crashes using TCP fastopen, and Dave Jones gave a nice stack trace pointing to the error. Issue is that tcp_get_metrics() should not be called with a NULL dst Fixes: 1fe4c481ba637 ("net-tcp: Fast Open client - cookie cache") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: Dave Jones <davej@redhat.com> Cc: Yuchung Cheng <ycheng@google.com> Acked-by: Yuchung Cheng <ycheng@google.com> Tested-by: Dave Jones <davej@fedoraproject.org> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-12-08tcp: tsq: restore minimal amount of queueingEric Dumazet
[ Upstream commit 98e09386c0ef4dfd48af7ba60ff908f0d525cdee ] After commit c9eeec26e32e ("tcp: TSQ can use a dynamic limit"), several users reported throughput regressions, notably on mvneta and wifi adapters. 802.11 AMPDU requires a fair amount of queueing to be effective. This patch partially reverts the change done in tcp_write_xmit() so that the minimal amount is sysctl_tcp_limit_output_bytes. It also remove the use of this sysctl while building skb stored in write queue, as TSO autosizing does the right thing anyway. Users with well behaving NICS and correct qdisc (like sch_fq), can then lower the default sysctl_tcp_limit_output_bytes value from 128KB to 8KB. This new usage of sysctl_tcp_limit_output_bytes permits each driver authors to check how their driver performs when/if the value is set to a minimum of 4KB. Normally, line rate for a single TCP flow should be possible, but some drivers rely on timers to perform TX completion and too long TX completion delays prevent reaching full throughput. Fixes: c9eeec26e32e ("tcp: TSQ can use a dynamic limit") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: Sujith Manoharan <sujith@msujith.org> Reported-by: Arnaud Ebalard <arno@natisbad.org> Tested-by: Sujith Manoharan <sujith@msujith.org> Cc: Felix Fietkau <nbd@openwrt.org> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-11-20ip_gre: Fix WCCPv2 header parsing.Pravin B Shelar
[ No applicable upstream commit, the upstream implementation is now completely different and doesn't have this bug. ] In case of WCCPv2 GRE header has extra four bytes. Following patch pull those extra four bytes so that skb offsets are set correctly. CC: Eric Dumazet <eric.dumazet@gmail.com> Reported-by: Peter Schmitt <peter.schmitt82@yahoo.de> Tested-by: Peter Schmitt <peter.schmitt82@yahoo.de> Signed-off-by: Pravin B Shelar <pshelar@nicira.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-11-04inet: fix possible memory corruption with UDP_CORK and UFOHannes Frederic Sowa
[ This is a simplified -stable version of a set of upstream commits. ] This is a replacement patch only for stable which does fix the problems handled by the following two commits in -net: "ip_output: do skb ufo init for peeked non ufo skb as well" (e93b7d748be887cd7639b113ba7d7ef792a7efb9) "ip6_output: do skb ufo init for peeked non ufo skb as well" (c547dbf55d5f8cf615ccc0e7265e98db27d3fb8b) Three frames are written on a corked udp socket for which the output netdevice has UFO enabled. If the first and third frame are smaller than the mtu and the second one is bigger, we enqueue the second frame with skb_append_datato_frags without initializing the gso fields. This leads to the third frame appended regulary and thus constructing an invalid skb. This fixes the problem by always using skb_append_datato_frags as soon as the first frag got enqueued to the skb without marking the packet as SKB_GSO_UDP. The problem with only two frames for ipv6 was fixed by "ipv6: udp packets following an UFO enqueued packet need also be handled by UFO" (2811ebac2521ceac84f2bdae402455baa6a7fb47). Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Cc: Jiri Pirko <jiri@resnulli.us> Cc: Eric Dumazet <eric.dumazet@gmail.com> Cc: David Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-11-04vti: get rid of nf mark rule in preroutingChristophe Gouault
[ Upstream commit 7263a5187f9e9de45fcb51349cf0e031142c19a1 ] This patch fixes and improves the use of vti interfaces (while lightly changing the way of configuring them). Currently: - it is necessary to identify and mark inbound IPsec packets destined to each vti interface, via netfilter rules in the mangle table at prerouting hook. - the vti module cannot retrieve the right tunnel in input since commit b9959fd3: vti tunnels all have an i_key, but the tunnel lookup is done with flag TUNNEL_NO_KEY, so there no chance to retrieve them. - the i_key is used by the outbound processing as a mark to lookup for the right SP and SA bundle. This patch uses the o_key to store the vti mark (instead of i_key) and enables: - to avoid the need for previously marking the inbound skbuffs via a netfilter rule. - to properly retrieve the right tunnel in input, only based on the IPsec packet outer addresses. - to properly perform an inbound policy check (using the tunnel o_key as a mark). - to properly perform an outbound SPD and SAD lookup (using the tunnel o_key as a mark). - to keep the current mark of the skbuff. The skbuff mark is neither used nor changed by the vti interface. Only the vti interface o_key is used. SAs have a wildcard mark. SPs have a mark equal to the vti interface o_key. The vti interface must be created as follows (i_key = 0, o_key = mark): ip link add vti1 mode vti local 1.1.1.1 remote 2.2.2.2 okey 1 The SPs attached to vti1 must be created as follows (mark = vti1 o_key): ip xfrm policy add dir out mark 1 tmpl src 1.1.1.1 dst 2.2.2.2 \ proto esp mode tunnel ip xfrm policy add dir in mark 1 tmpl src 2.2.2.2 dst 1.1.1.1 \ proto esp mode tunnel The SAs are created with the default wildcard mark. There is no distinction between global vs. vti SAs. Just their addresses will possibly link them to a vti interface: ip xfrm state add src 1.1.1.1 dst 2.2.2.2 proto esp spi 1000 mode tunnel \ enc "cbc(aes)" "azertyuiopqsdfgh" ip xfrm state add src 2.2.2.2 dst 1.1.1.1 proto esp spi 2000 mode tunnel \ enc "cbc(aes)" "sqbdhgqsdjqjsdfh" To avoid matching "global" (not vti) SPs in vti interfaces, global SPs should no use the default wildcard mark, but explicitly match mark 0. To avoid a double SPD lookup in input and output (in global and vti SPDs), the NOPOLICY and NOXFRM options should be set on the vti interfaces: echo 1 > /proc/sys/net/ipv4/conf/vti1/disable_policy echo 1 > /proc/sys/net/ipv4/conf/vti1/disable_xfrm The outgoing traffic is steered to vti1 by a route via the vti interface: ip route add 192.168.0.0/16 dev vti1 The incoming IPsec traffic is steered to vti1 because its outer addresses match the vti1 tunnel configuration. Signed-off-by: Christophe Gouault <christophe.gouault@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-11-04ipv4: fix ineffective source address selectionJiri Benc
[ Upstream commit 0a7e22609067ff524fc7bbd45c6951dd08561667 ] When sending out multicast messages, the source address in inet->mc_addr is ignored and rewritten by an autoselected one. This is caused by a typo in commit 813b3b5db831 ("ipv4: Use caller's on-stack flowi as-is in output route lookups"). Signed-off-by: Jiri Benc <jbenc@redhat.com> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-11-04net: do not call sock_put() on TIMEWAIT socketsEric Dumazet
[ Upstream commit 80ad1d61e72d626e30ebe8529a0455e660ca4693 ] commit 3ab5aee7fe84 ("net: Convert TCP & DCCP hash tables to use RCU / hlist_nulls") incorrectly used sock_put() on TIMEWAIT sockets. We should instead use inet_twsk_put() Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-11-04tcp: fix incorrect ca_state in tail loss probeYuchung Cheng
[ Upstream commit 031afe4990a7c9dbff41a3a742c44d3e740ea0a1 ] On receiving an ACK that covers the loss probe sequence, TLP immediately sets the congestion state to Open, even though some packets are not recovered and retransmisssion are on the way. The later ACks may trigger a WARN_ON check in step D of tcp_fastretrans_alert(), e.g., https://bugzilla.redhat.com/show_bug.cgi?id=989251 The fix is to follow the similar procedure in recovery by calling tcp_try_keep_open(). The sender switches to Open state if no packets are retransmissted. Otherwise it goes to Disorder and let subsequent ACKs move the state to Recovery or Open. Reported-By: Michael Sterrett <michael@sterretts.net> Tested-By: Dormando <dormando@rydia.net> Signed-off-by: Yuchung Cheng <ycheng@google.com> Acked-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-11-04tcp: do not forget FIN in tcp_shifted_skb()Eric Dumazet
[ Upstream commit 5e8a402f831dbe7ee831340a91439e46f0d38acd ] Yuchung found following problem : There are bugs in the SACK processing code, merging part in tcp_shift_skb_data(), that incorrectly resets or ignores the sacked skbs FIN flag. When a receiver first SACK the FIN sequence, and later throw away ofo queue (e.g., sack-reneging), the sender will stop retransmitting the FIN flag, and hangs forever. Following packetdrill test can be used to reproduce the bug. $ cat sack-merge-bug.pkt `sysctl -q net.ipv4.tcp_fack=0` // Establish a connection and send 10 MSS. 0.000 socket(..., SOCK_STREAM, IPPROTO_TCP) = 3 +.000 setsockopt(3, SOL_SOCKET, SO_REUSEADDR, [1], 4) = 0 +.000 bind(3, ..., ...) = 0 +.000 listen(3, 1) = 0 +.050 < S 0:0(0) win 32792 <mss 1000,sackOK,nop,nop,nop,wscale 7> +.000 > S. 0:0(0) ack 1 <mss 1460,nop,nop,sackOK,nop,wscale 6> +.001 < . 1:1(0) ack 1 win 1024 +.000 accept(3, ..., ...) = 4 +.100 write(4, ..., 12000) = 12000 +.000 shutdown(4, SHUT_WR) = 0 +.000 > . 1:10001(10000) ack 1 +.050 < . 1:1(0) ack 2001 win 257 +.000 > FP. 10001:12001(2000) ack 1 +.050 < . 1:1(0) ack 2001 win 257 <sack 10001:11001,nop,nop> +.050 < . 1:1(0) ack 2001 win 257 <sack 10001:12002,nop,nop> // SACK reneg +.050 < . 1:1(0) ack 12001 win 257 +0 %{ print "unacked: ",tcpi_unacked }% +5 %{ print "" }% First, a typo inverted left/right of one OR operation, then code forgot to advance end_seq if the merged skb carried FIN. Bug was added in 2.6.29 by commit 832d11c5cd076ab ("tcp: Try to restore large SKBs while SACK processing") Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Yuchung Cheng <ycheng@google.com> Acked-by: Neal Cardwell <ncardwell@google.com> Cc: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi> Acked-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-11-04tcp: must unclone packets before mangling themEric Dumazet
[ Upstream commit c52e2421f7368fd36cbe330d2cf41b10452e39a9 ] TCP stack should make sure it owns skbs before mangling them. We had various crashes using bnx2x, and it turned out gso_size was cleared right before bnx2x driver was populating TC descriptor of the _previous_ packet send. TCP stack can sometime retransmit packets that are still in Qdisc. Of course we could make bnx2x driver more robust (using ACCESS_ONCE(shinfo->gso_size) for example), but the bug is TCP stack. We have identified two points where skb_unclone() was needed. This patch adds a WARN_ON_ONCE() to warn us if we missed another fix of this kind. Kudos to Neal for finding the root cause of this bug. Its visible using small MSS. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Neal Cardwell <ncardwell@google.com> Cc: Yuchung Cheng <ycheng@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-11-04tcp: TSQ can use a dynamic limitEric Dumazet
[ Upstream commit c9eeec26e32e087359160406f96e0949b3cc6f10 ] When TCP Small Queues was added, we used a sysctl to limit amount of packets queues on Qdisc/device queues for a given TCP flow. Problem is this limit is either too big for low rates, or too small for high rates. Now TCP stack has rate estimation in sk->sk_pacing_rate, and TSO auto sizing, it can better control number of packets in Qdisc/device queues. New limit is two packets or at least 1 to 2 ms worth of packets. Low rates flows benefit from this patch by having even smaller number of packets in queues, allowing for faster recovery, better RTT estimations. High rates flows benefit from this patch by allowing more than 2 packets in flight as we had reports this was a limiting factor to reach line rate. [ In particular if TX completion is delayed because of coalescing parameters ] Example for a single flow on 10Gbp link controlled by FQ/pacing 14 packets in flight instead of 2 $ tc -s -d qd qdisc fq 8001: dev eth0 root refcnt 32 limit 10000p flow_limit 100p buckets 1024 quantum 3028 initial_quantum 15140 Sent 1168459366606 bytes 771822841 pkt (dropped 0, overlimits 0 requeues 6822476) rate 9346Mbit 771713pps backlog 953820b 14p requeues 6822476 2047 flow, 2046 inactive, 1 throttled, delay 15673 ns 2372 gc, 0 highprio, 0 retrans, 9739249 throttled, 0 flows_plimit Note that sk_pacing_rate is currently set to twice the actual rate, but this might be refined in the future when a flow is in congestion avoidance. Additional change : skb->destructor should be set to tcp_wfree(). A future patch (for linux 3.13+) might remove tcp_limit_output_bytes Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Wei Liu <wei.liu2@citrix.com> Cc: Cong Wang <xiyou.wangcong@gmail.com> Cc: Yuchung Cheng <ycheng@google.com> Cc: Neal Cardwell <ncardwell@google.com> Acked-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-11-04tcp: TSO packets automatic sizingEric Dumazet
[ Upstream commits 6d36824e730f247b602c90e8715a792003e3c5a7, 02cf4ebd82ff0ac7254b88e466820a290ed8289a, and parts of 7eec4174ff29cd42f2acfae8112f51c228545d40 ] After hearing many people over past years complaining against TSO being bursty or even buggy, we are proud to present automatic sizing of TSO packets. One part of the problem is that tcp_tso_should_defer() uses an heuristic relying on upcoming ACKS instead of a timer, but more generally, having big TSO packets makes little sense for low rates, as it tends to create micro bursts on the network, and general consensus is to reduce the buffering amount. This patch introduces a per socket sk_pacing_rate, that approximates the current sending rate, and allows us to size the TSO packets so that we try to send one packet every ms. This field could be set by other transports. Patch has no impact for high speed flows, where having large TSO packets makes sense to reach line rate. For other flows, this helps better packet scheduling and ACK clocking. This patch increases performance of TCP flows in lossy environments. A new sysctl (tcp_min_tso_segs) is added, to specify the minimal size of a TSO packet (default being 2). A follow-up patch will provide a new packet scheduler (FQ), using sk_pacing_rate as an input to perform optional per flow pacing. This explains why we chose to set sk_pacing_rate to twice the current rate, allowing 'slow start' ramp up. sk_pacing_rate = 2 * cwnd * mss / srtt v2: Neal Cardwell reported a suspect deferring of last two segments on initial write of 10 MSS, I had to change tcp_tso_should_defer() to take into account tp->xmit_size_goal_segs Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Neal Cardwell <ncardwell@google.com> Cc: Yuchung Cheng <ycheng@google.com> Cc: Van Jacobson <vanj@google.com> Cc: Tom Herbert <therbert@google.com> Acked-by: Yuchung Cheng <ycheng@google.com> Acked-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-10-13ip_tunnel: Fix a memory corruption in ip_tunnel_xmitSteffen Klassert
[ Upstream commit 3e08f4a72f689c6296d336c2aab4bddd60c93ae2 ] We might extend the used aera of a skb beyond the total headroom when we install the ipip header. Fix this by calling skb_cow_head() unconditionally. Bug was introduced with commit c544193214 ("GRE: Refactor GRE tunneling code.") Cc: Pravin Shelar <pshelar@nicira.com> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-10-13ipv4 igmp: use in_dev_put in timer handlers instead of __in_dev_putSalam Noureddine
[ Upstream commit e2401654dd0f5f3fb7a8d80dad9554d73d7ca394 ] It is possible for the timer handlers to run after the call to ip_mc_down so use in_dev_put instead of __in_dev_put in the handler function in order to do proper cleanup when the refcnt reaches 0. Otherwise, the refcnt can reach zero without the in_device being destroyed and we end up leaking a reference to the net_device and see messages like the following, unregister_netdevice: waiting for eth0 to become free. Usage count = 1 Tested on linux-3.4.43. Signed-off-by: Salam Noureddine <noureddine@aristanetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-10-13net: net_secret should not depend on TCPEric Dumazet
[ Upstream commit 9a3bab6b05383f1e4c3716b3615500c51285959e ] A host might need net_secret[] and never open a single socket. Problem added in commit aebda156a570782 ("net: defer net_secret[] initialization") Based on prior patch from Hannes Frederic Sowa. Reported-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: Eric Dumazet <edumazet@google.com> Acked-by: Hannes Frederic Sowa <hannes@strressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-10-13ip: generate unique IP identificator if local fragmentation is allowedAnsis Atteka
[ Upstream commit 703133de331a7a7df47f31fb9de51dc6f68a9de8 ] If local fragmentation is allowed, then ip_select_ident() and ip_select_ident_more() need to generate unique IDs to ensure correct defragmentation on the peer. For example, if IPsec (tunnel mode) has to encrypt large skbs that have local_df bit set, then all IP fragments that belonged to different ESP datagrams would have used the same identificator. If one of these IP fragments would get lost or reordered, then peer could possibly stitch together wrong IP fragments that did not belong to the same datagram. This would lead to a packet loss or data corruption. Signed-off-by: Ansis Atteka <aatteka@nicira.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-10-13ip: use ip_hdr() in __ip_make_skb() to retrieve IP headerAnsis Atteka
[ Upstream commit 749154aa56b57652a282cbde57a57abc278d1205 ] skb->data already points to IP header, but for the sake of consistency we can also use ip_hdr() to retrieve it. Signed-off-by: Ansis Atteka <aatteka@nicira.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-10-13tcp: Add missing braces to do_tcp_setsockoptDave Jones
[ Upstream commit e2e5c4c07caf810d7849658dca42f598b3938e21 ] Signed-off-by: Dave Jones <davej@fedoraproject.org> Acked-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-09-14tcp: tcp_make_synack() should use sock_wmallocPhil Oester
[ Upstream commit eb8895debe1baba41fcb62c78a16f0c63c21662a ] In commit 90ba9b19 (tcp: tcp_make_synack() can use alloc_skb()), Eric changed the call to sock_wmalloc in tcp_make_synack to alloc_skb. In doing so, the netfilter owner match lost its ability to block the SYNACK packet on outbound listening sockets. Revert the change, restoring the owner match functionality. This closes netfilter bugzilla #847. Signed-off-by: Phil Oester <kernel@linuxace.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-09-14ipv4: sendto/hdrincl: don't use destination address found in headerChris Clark
[ Upstream commit c27c9322d015dc1d9dfdf31724fca71c0476c4d1 ] ipv4: raw_sendmsg: don't use header's destination address A sendto() regression was bisected and found to start with commit f8126f1d5136be1 (ipv4: Adjust semantics of rt->rt_gateway.) The problem is that it tries to ARP-lookup the constructed packet's destination address rather than the explicitly provided address. Fix this using FLOWI_FLAG_KNOWN_NH so that given nexthop is used. cf. commit 2ad5b9e4bd314fc685086b99e90e5de3bc59e26b Reported-by: Chris Clark <chris.clark@alcatel-lucent.com> Bisected-by: Chris Clark <chris.clark@alcatel-lucent.com> Tested-by: Chris Clark <chris.clark@alcatel-lucent.com> Suggested-by: Julian Anastasov <ja@ssi.bg> Signed-off-by: Chris Clark <chris.clark@alcatel-lucent.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-09-14tcp: don't apply tsoffset if rcv_tsecr is zeroAndrew Vagin
[ Upstream commit e3e12028315749b7fa2edbc37328e5847be9ede9 ] The zero value means that tsecr is not valid, so it's a special case. tsoffset is used to customize tcp_time_stamp for one socket. tsoffset is usually zero, it's used when a socket was moved from one host to another host. Currently this issue affects logic of tcp_rcv_rtt_measure_ts. Due to incorrect value of rcv_tsecr, tcp_rcv_rtt_measure_ts sets rto to TCP_RTO_MAX. Reported-by: Cyrill Gorcunov <gorcunov@openvz.org> Cc: Pavel Emelyanov <xemul@parallels.com> Cc: Eric Dumazet <eric.dumazet@gmail.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Alexey Kuznetsov <kuznet@ms2.inr.ac.ru> Cc: James Morris <jmorris@namei.org> Cc: Hideaki YOSHIFUJI <yoshfuji@linux-ipv6.org> Cc: Patrick McHardy <kaber@trash.net> Signed-off-by: Andrey Vagin <avagin@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-09-14tcp: initialize rcv_tstamp for restored socketsAndrew Vagin
[ Upstream commit c7781a6e3c4a9a17e144ec2db00ebfea327bd627 ] u32 rcv_tstamp; /* timestamp of last received ACK */ Its value used in tcp_retransmit_timer, which closes socket if the last ack was received more then TCP_RTO_MAX ago. Currently rcv_tstamp is initialized to zero and if tcp_retransmit_timer is called before receiving a first ack, the connection is closed. This patch initializes rcv_tstamp to a timestamp, when a socket was restored. Reported-by: Cyrill Gorcunov <gorcunov@openvz.org> Cc: Pavel Emelyanov <xemul@parallels.com> Cc: Eric Dumazet <eric.dumazet@gmail.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Alexey Kuznetsov <kuznet@ms2.inr.ac.ru> Cc: James Morris <jmorris@namei.org> Cc: Hideaki YOSHIFUJI <yoshfuji@linux-ipv6.org> Cc: Patrick McHardy <kaber@trash.net> Signed-off-by: Andrey Vagin <avagin@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-09-14tcp: set timestamps for restored skb-sAndrey Vagin
[ Upstream commit 7ed5c5ae96d23da22de95e1c7a239537acd378b1 ] When the repair mode is turned off, the write queue seqs are updated so that the whole queue is considered to be 'already sent. The "when" field must be set for such skb. It's used in tcp_rearm_rto for example. If the "when" field isn't set, the retransmit timeout can be calculated incorrectly and a tcp connected can stop for two minutes (TCP_RTO_MAX). Acked-by: Pavel Emelyanov <xemul@parallels.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Alexey Kuznetsov <kuznet@ms2.inr.ac.ru> Cc: James Morris <jmorris@namei.org> Cc: Hideaki YOSHIFUJI <yoshfuji@linux-ipv6.org> Cc: Patrick McHardy <kaber@trash.net> Signed-off-by: Andrey Vagin <avagin@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-09-14ip_tunnel: Do not use inner ip-header-id for tunnel ip-header-id.Pravin B Shelar
[ Upstream commit 4221f40513233fa8edeef7fc82e44163fde03b9b ] Using inner-id for tunnel id is not safe in some rare cases. E.g. packets coming from multiple sources entering same tunnel can have same id. Therefore on tunnel packet receive we could have packets from two different stream but with same source and dst IP with same ip-id which could confuse ip packet reassembly. Following patch reverts optimization from commit 490ab08127 (IP_GRE: Fix IP-Identification.) Signed-off-by: Pravin B Shelar <pshelar@nicira.com> CC: Jarno Rajahalme <jrajahalme@nicira.com> CC: Ansis Atteka <aatteka@nicira.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-09-14ip_gre: fix ipgre_header to return correct offset MIME-Version: 1.0Timo Teräs
[ Upstream commit 77a482bdb2e68d13fae87541b341905ba70d572b ] Fix ipgre_header() (header_ops->create) to return the correct amount of bytes pushed. Most callers of dev_hard_header() seem to care only if it was success, but af_packet.c uses it as offset to the skb to copy from userspace only once. In practice this fixes packet socket sendto()/sendmsg() to gre tunnels. Regression introduced in c54419321455631079c7d6e60bc732dd0c5914c5 ("GRE: Refactor GRE tunneling code.") Cc: Pravin B Shelar <pshelar@nicira.com> Signed-off-by: Timo Teräs <timo.teras@iki.fi> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-09-14tcp: cubic: fix bug in bictcp_acked()Eric Dumazet
[ Upstream commit cd6b423afd3c08b27e1fed52db828ade0addbc6b ] While investigating about strange increase of retransmit rates on hosts ~24 days after boot, Van found hystart was disabled if ca->epoch_start was 0, as following condition is true when tcp_time_stamp high order bit is set. (s32)(tcp_time_stamp - ca->epoch_start) < HZ Quoting Van : At initialization & after every loss ca->epoch_start is set to zero so I believe that the above line will turn off hystart as soon as the 2^31 bit is set in tcp_time_stamp & hystart will stay off for 24 days. I think we've observed that cubic's restart is too aggressive without hystart so this might account for the higher drop rate we observe. Diagnosed-by: Van Jacobson <vanj@google.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Neal Cardwell <ncardwell@google.com> Cc: Yuchung Cheng <ycheng@google.com> Acked-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-09-14tcp: cubic: fix overflow error in bictcp_update()Eric Dumazet
[ Upstream commit 2ed0edf9090bf4afa2c6fc4f38575a85a80d4b20 ] commit 17a6e9f1aa9 ("tcp_cubic: fix clock dependency") added an overflow error in bictcp_update() in following code : /* change the unit from HZ to bictcp_HZ */ t = ((tcp_time_stamp + msecs_to_jiffies(ca->delay_min>>3) - ca->epoch_start) << BICTCP_HZ) / HZ; Because msecs_to_jiffies() being unsigned long, compiler does implicit type promotion. We really want to constrain (tcp_time_stamp - ca->epoch_start) to a signed 32bit value, or else 't' has unexpected high values. This bugs triggers an increase of retransmit rates ~24 days after boot [1], as the high order bit of tcp_time_stamp flips. [1] for hosts with HZ=1000 Big thanks to Van Jacobson for spotting this problem. Diagnosed-by: Van Jacobson <vanj@google.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Neal Cardwell <ncardwell@google.com> Cc: Yuchung Cheng <ycheng@google.com> Cc: Stephen Hemminger <stephen@networkplumber.org> Acked-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-09-14fib_trie: remove potential out of bound accessEric Dumazet
[ Upstream commit aab515d7c32a34300312416c50314e755ea6f765 ] AddressSanitizer [1] dynamic checker pointed a potential out of bound access in leaf_walk_rcu() We could allocate one more slot in tnode_new() to leave the prefetch() in-place but it looks not worth the pain. Bug added in commit 82cfbb008572b ("[IPV4] fib_trie: iterator recode") [1] : https://code.google.com/p/address-sanitizer/wiki/AddressSanitizerForKernel Reported-by: Andrey Konovalov <andreyknvl@google.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Dmitry Vyukov <dvyukov@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-09-14net: rtm_to_ifaddr: free ifa if ifa_cacheinfo processing failsDaniel Borkmann
[ Upstream commit 446266b0c742a2c9ee8f0dce759a0117bce58a86 ] Commit 5c766d642 ("ipv4: introduce address lifetime") leaves the ifa resource that was allocated via inet_alloc_ifa() unfreed when returning the function with -EINVAL. Thus, free it first via inet_free_ifa(). Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Reviewed-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-11sysctl net: Keep tcp_syn_retries inside the boundaryMichal Tesar
[ Upstream commit 651e92716aaae60fc41b9652f54cb6803896e0da ] Limit the min/max value passed to the /proc/sys/net/ipv4/tcp_syn_retries. Signed-off-by: Michal Tesar <mtesar@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-07-28ipv4: set transport header earlierEric Dumazet
[ Upstream commit 21d1196a35f5686c4323e42a62fdb4b23b0ab4a3 ] commit 45f00f99d6e ("ipv4: tcp: clean up tcp_v4_early_demux()") added a performance regression for non GRO traffic, basically disabling IP early demux. IPv6 stack resets transport header in ip6_rcv() before calling IP early demux in ip6_rcv_finish(), while IPv4 does this only in ip_local_deliver_finish(), _after_ IP early demux. GRO traffic happened to enable IP early demux because transport header is also set in inet_gro_receive() Instead of reverting the faulty commit, we can make IPv4/IPv6 behave the same : transport_header should be set in ip_rcv() instead of ip_local_deliver_finish() ip_local_deliver_finish() can also use skb_network_header_len() which is faster than ip_hdrlen() Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Neal Cardwell <ncardwell@google.com> Cc: Tom Herbert <therbert@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-07-28gre: Fix MTU sizing check for gretap tunnelsAlexander Duyck
[ Upstream commit 8c91e162e058bb91b7766f26f4d5823a21941026 ] This change fixes an MTU sizing issue seen with gretap tunnels when non-gso packets are sent from the interface. In my case I was able to reproduce the issue by simply sending a ping of 1421 bytes with the gretap interface created on a device with a standard 1500 mtu. This fix is based on the fact that the tunnel mtu is already adjusted by dev->hard_header_len so it would make sense that any packets being compared against that mtu should also be adjusted by hard_header_len and the tunnel header instead of just the tunnel header. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Reported-by: Cong Wang <amwang@redhat.com> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-07-28ipv6: call udp_push_pending_frames when uncorking a socket with AF_INET ↵Hannes Frederic Sowa
pending data [ Upstream commit 8822b64a0fa64a5dd1dfcf837c5b0be83f8c05d1 ] We accidentally call down to ip6_push_pending_frames when uncorking pending AF_INET data on a ipv6 socket. This results in the following splat (from Dave Jones): skbuff: skb_under_panic: text:ffffffff816765f6 len:48 put:40 head:ffff88013deb6df0 data:ffff88013deb6dec tail:0x2c end:0xc0 dev:<NULL> ------------[ cut here ]------------ kernel BUG at net/core/skbuff.c:126! invalid opcode: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC Modules linked in: dccp_ipv4 dccp 8021q garp bridge stp dlci mpoa snd_seq_dummy sctp fuse hidp tun bnep nfnetlink scsi_transport_iscsi rfcomm can_raw can_bcm af_802154 appletalk caif_socket can caif ipt_ULOG x25 rose af_key pppoe pppox ipx phonet irda llc2 ppp_generic slhc p8023 psnap p8022 llc crc_ccitt atm bluetooth +netrom ax25 nfc rfkill rds af_rxrpc coretemp hwmon kvm_intel kvm crc32c_intel snd_hda_codec_realtek ghash_clmulni_intel microcode pcspkr snd_hda_codec_hdmi snd_hda_intel snd_hda_codec snd_hwdep usb_debug snd_seq snd_seq_device snd_pcm e1000e snd_page_alloc snd_timer ptp snd pps_core soundcore xfs libcrc32c CPU: 2 PID: 8095 Comm: trinity-child2 Not tainted 3.10.0-rc7+ #37 task: ffff8801f52c2520 ti: ffff8801e6430000 task.ti: ffff8801e6430000 RIP: 0010:[<ffffffff816e759c>] [<ffffffff816e759c>] skb_panic+0x63/0x65 RSP: 0018:ffff8801e6431de8 EFLAGS: 00010282 RAX: 0000000000000086 RBX: ffff8802353d3cc0 RCX: 0000000000000006 RDX: 0000000000003b90 RSI: ffff8801f52c2ca0 RDI: ffff8801f52c2520 RBP: ffff8801e6431e08 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000001 R11: 0000000000000001 R12: ffff88022ea0c800 R13: ffff88022ea0cdf8 R14: ffff8802353ecb40 R15: ffffffff81cc7800 FS: 00007f5720a10740(0000) GS:ffff880244c00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000005862000 CR3: 000000022843c000 CR4: 00000000001407e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000600 Stack: ffff88013deb6dec 000000000000002c 00000000000000c0 ffffffff81a3f6e4 ffff8801e6431e18 ffffffff8159a9aa ffff8801e6431e90 ffffffff816765f6 ffffffff810b756b 0000000700000002 ffff8801e6431e40 0000fea9292aa8c0 Call Trace: [<ffffffff8159a9aa>] skb_push+0x3a/0x40 [<ffffffff816765f6>] ip6_push_pending_frames+0x1f6/0x4d0 [<ffffffff810b756b>] ? mark_held_locks+0xbb/0x140 [<ffffffff81694919>] udp_v6_push_pending_frames+0x2b9/0x3d0 [<ffffffff81694660>] ? udplite_getfrag+0x20/0x20 [<ffffffff8162092a>] udp_lib_setsockopt+0x1aa/0x1f0 [<ffffffff811cc5e7>] ? fget_light+0x387/0x4f0 [<ffffffff816958a4>] udpv6_setsockopt+0x34/0x40 [<ffffffff815949f4>] sock_common_setsockopt+0x14/0x20 [<ffffffff81593c31>] SyS_setsockopt+0x71/0xd0 [<ffffffff816f5d54>] tracesys+0xdd/0xe2 Code: 00 00 48 89 44 24 10 8b 87 d8 00 00 00 48 89 44 24 08 48 8b 87 e8 00 00 00 48 c7 c7 c0 04 aa 81 48 89 04 24 31 c0 e8 e1 7e ff ff <0f> 0b 55 48 89 e5 0f 0b 55 48 89 e5 0f 0b 55 48 89 e5 0f 0b 55 RIP [<ffffffff816e759c>] skb_panic+0x63/0x65 RSP <ffff8801e6431de8> This patch adds a check if the pending data is of address family AF_INET and directly calls udp_push_ending_frames from udp_v6_push_pending_frames if that is the case. This bug was found by Dave Jones with trinity. (Also move the initialization of fl6 below the AF_INET check, even if not strictly necessary.) Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Cc: Dave Jones <davej@redhat.com> Cc: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-07-28ipip: fix a regression in ioctlCong Wang
[ Upstream commit 3b7b514f44bff05d26a6499c4d4fac2a83938e6e ] This is a regression introduced by commit fd58156e456d9f68fe0448 (IPIP: Use ip-tunneling code.) Similar to GRE tunnel, previously we only check the parameters for SIOCADDTUNNEL and SIOCCHGTUNNEL, after that commit, the check is moved for all commands. So, just check for SIOCADDTUNNEL and SIOCCHGTUNNEL. Also, the check for i_key, o_key etc. is suspicious too, which did not exist before, reset them before passing to ip_tunnel_ioctl(). Signed-off-by: Cong Wang <amwang@redhat.com> Cc: Pravin B Shelar <pshelar@nicira.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-07-28ip_tunnels: Use skb-len to PMTU check.Pravin B Shelar
[ Upstream commit 23a3647bc4f93bac3776c66dc2c7f7f68b3cd662 ] In path mtu check, ip header total length works for gre device but not for gre-tap device. Use skb len which is consistent for all tunneling types. This is old bug in gre. This also fixes mtu calculation bug introduced by commit c54419321455631079c7d (GRE: Refactor GRE tunneling code). Reported-by: Timo Teras <timo.teras@iki.fi> Signed-off-by: Pravin B Shelar <pshelar@nicira.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-07-28vti: remove duplicated code to fix a memory leakCong Wang
[ Upstream commit ab6c7a0a43c2eaafa57583822b619b22637b49c7 ] vti module allocates dev->tstats twice: in vti_fb_tunnel_init() and in vti_tunnel_init(), this lead to a memory leak of dev->tstats. Just remove the duplicated operations in vti_fb_tunnel_init(). (candidate for -stable) Signed-off-by: Cong Wang <amwang@redhat.com> Cc: Stephen Hemminger <stephen@networkplumber.org> Cc: Saurabh Mohan <saurabh.mohan@vyatta.com> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-07-28gre: fix a regression in ioctlCong Wang
[ Upstream commit 6c734fb8592f6768170e48e7102cb2f0a1bb9759 ] When testing GRE tunnel, I got: # ip tunnel show get tunnel gre0 failed: Invalid argument get tunnel gre1 failed: Invalid argument This is a regression introduced by commit c54419321455631079c7d ("GRE: Refactor GRE tunneling code.") because previously we only check the parameters for SIOCADDTUNNEL and SIOCCHGTUNNEL, after that commit, the check is moved for all commands. So, just check for SIOCADDTUNNEL and SIOCCHGTUNNEL. After this patch I got: # ip tunnel show gre0: gre/ip remote any local any ttl inherit nopmtudisc gre1: gre/ip remote 192.168.122.101 local 192.168.122.45 ttl inherit Signed-off-by: Cong Wang <amwang@redhat.com> Cc: Pravin B Shelar <pshelar@nicira.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-06-14 05:08:08 +0000