aboutsummaryrefslogtreecommitdiff
path: root/net
AgeCommit message (Collapse)Author
2011-10-20net: allow CAP_NET_RAW to set socket options IP{,V6}_TRANSPARENTMaciej Żenczykowski
Up till now the IP{,V6}_TRANSPARENT socket options (which actually set the same bit in the socket struct) have required CAP_NET_ADMIN privileges to set or clear the option. - we make clearing the bit not require any privileges. - we allow CAP_NET_ADMIN to set the bit (as before this change) - we allow CAP_NET_RAW to set this bit, because raw sockets already pretty much effectively allow you to emulate socket transparency. Signed-off-by: Maciej Żenczykowski <maze@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-10-20tcp: remove unused tcp_fin() parametersEric Dumazet
tcp_fin() only needs socket pointer, we can remove skb and th params. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-10-20Merge branch 'batman-adv/maint' of git://git.open-mesh.org/linux-mergeDavid S. Miller
2011-10-20pktgen: remove ndelay() callEric Dumazet
Daniel Turull reported inaccuracies in pktgen when using low packet rates, because we call ndelay(val) with values bigger than 20000. Instead of calling ndelay() for delays < 100us, we can instead loop calling ktime_now() only. Reported-by: Daniel Turull <daniel.turull@gmail.com> Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-10-20tcp: use TCP_DEFAULT_INIT_RCVWND in tcp_fixup_rcvbuf()Eric Dumazet
Since commit 356f039822b (TCP: increase default initial receive window.), we allow sender to send 10 (TCP_DEFAULT_INIT_RCVWND) segments. Change tcp_fixup_rcvbuf() to reflect this change, even if no real change is expected, since sysctl_tcp_rmem[1] = 87380 and this value is bigger than tcp_fixup_rcvbuf() computed rcvmem (~23720) Note: Since commit 356f039822b limited default window to maximum of 10*1460 and 2*MSS, we use same heuristic in this patch. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-10-20ip_gre: dont increase dev->needed_headroom on a live deviceEric Dumazet
It seems ip_gre is able to change dev->needed_headroom on the fly. Its is not legal unfortunately and triggers a BUG in raw_sendmsg() skb = sock_alloc_send_skb(sk, ... + LL_ALLOCATED_SPACE(rt->dst.dev) < another cpu change dev->needed_headromm (making it bigger) ... skb_reserve(skb, LL_RESERVED_SPACE(rt->dst.dev)); We end with LL_RESERVED_SPACE() being bigger than LL_ALLOCATED_SPACE() -> we crash later because skb head is exhausted. Bug introduced in commit 243aad83 in 2.6.34 (ip_gre: include route header_len in max_headroom calculation) Reported-by: Elmar Vonlanthen <evonlanthen@gmail.com> Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> CC: Timo Teräs <timo.teras@iki.fi> CC: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-10-19net: do not take an additional reference in skb_frag_set_pageIan Campbell
I audited all of the callers in the tree and only one of them (pktgen) expects it to do so. Taking this reference is pretty obviously confusing and error prone. In particular I looked at the following commits which switched callers of (__)skb_frag_set_page to the skb paged fragment api: 6a930b9f163d7e6d9ef692e05616c4ede65038ec cxgb3: convert to SKB paged frag API. 5dc3e196ea21e833128d51eb5b788a070fea1f28 myri10ge: convert to SKB paged frag API. 0e0634d20dd670a89af19af2a686a6cce943ac14 vmxnet3: convert to SKB paged frag API. 86ee8130a46769f73f8f423f99dbf782a09f9233 virtionet: convert to SKB paged frag API. 4a22c4c919c201c2a7f4ee09e672435a3072d875 sfc: convert to SKB paged frag API. 18324d690d6a5028e3c174fc1921447aedead2b8 cassini: convert to SKB paged frag API. b061b39e3ae18ad75466258cf2116e18fa5bbd80 benet: convert to SKB paged frag API. b7b6a688d217936459ff5cf1087b2361db952509 bnx2: convert to SKB paged frag API. 804cf14ea5ceca46554d5801e2817bba8116b7e5 net: xfrm: convert to SKB frag APIs ea2ab69379a941c6f8884e290fdd28c93936a778 net: convert core to skb paged frag APIs Signed-off-by: Ian Campbell <ian.campbell@citrix.com> Acked-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-10-19neigh: fix rcu splat in neigh_update()roy.qing.li@gmail.com
when use dst_get_neighbour to get neighbour, we need rcu_read_lock to protect, since dst_get_neighbour uses rcu_dereference. The bug was reported by Ari Savolainen <ari.m.savolainen@gmail.com> [ 105.612095] [ 105.612096] =================================================== [ 105.612100] [ INFO: suspicious rcu_dereference_check() usage. ] [ 105.612101] --------------------------------------------------- [ 105.612103] include/net/dst.h:91 invoked rcu_dereference_check() without protection! [ 105.612105] [ 105.612106] other info that might help us debug this: [ 105.612106] [ 105.612108] [ 105.612108] rcu_scheduler_active = 1, debug_locks = 0 [ 105.612110] 1 lock held by dnsmasq/2618: [ 105.612111] #0: (rtnl_mutex){+.+.+.}, at: [<ffffffff815df8c7>] rtnl_lock+0x17/0x20 [ 105.612120] [ 105.612121] stack backtrace: [ 105.612123] Pid: 2618, comm: dnsmasq Not tainted 3.1.0-rc1 #41 [ 105.612125] Call Trace: [ 105.612129] [<ffffffff810ccdcb>] lockdep_rcu_dereference+0xbb/0xc0 [ 105.612132] [<ffffffff815dc5a9>] neigh_update+0x4f9/0x5f0 [ 105.612135] [<ffffffff815da001>] ? neigh_lookup+0xe1/0x220 [ 105.612139] [<ffffffff81639298>] arp_req_set+0xb8/0x230 [ 105.612142] [<ffffffff8163a59f>] arp_ioctl+0x1bf/0x310 [ 105.612146] [<ffffffff810baa40>] ? lock_hrtimer_base.isra.26+0x30/0x60 [ 105.612150] [<ffffffff8163fb75>] inet_ioctl+0x85/0x90 [ 105.612154] [<ffffffff815b5520>] sock_do_ioctl+0x30/0x70 [ 105.612157] [<ffffffff815b55d3>] sock_ioctl+0x73/0x280 [ 105.612162] [<ffffffff811b7698>] do_vfs_ioctl+0x98/0x570 [ 105.612165] [<ffffffff811a5c40>] ? fget_light+0x340/0x3a0 [ 105.612168] [<ffffffff811b7bbf>] sys_ioctl+0x4f/0x80 [ 105.612172] [<ffffffff816fdcab>] system_call_fastpath+0x16/0x1b Reported-by: Ari Savolainen <ari.m.savolainen@gmail.com> Signed-off-by: RongQing <roy.qing.li@gmail.com> Acked-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-10-19filter: use unsigned int to silence static checker warningDan Carpenter
This is just a cleanup. My testing version of Smatch warns about this: net/core/filter.c +380 check_load_and_stores(6) warn: check 'flen' for negative values flen comes from the user. We try to clamp the values here between 1 and BPF_MAXINSNS but the clamp doesn't work because it could be negative. This is a bug, but it's not exploitable. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-10-19cleanup: remove unnecessary include.Kevin Wilson
This cleanup patch removes unnecessary include from net/ipv6/ip6_fib.c. Signed-off-by: Kevin Wilson <wkevils@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-10-19ipv4: compat_ioctl is local to af_inet.c, make it staticGerrit Renker
ipv4: compat_ioctl is local to af_inet.c, make it static Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-10-19fib_rules: fix unresolved_rules countingYan, Zheng
we should decrease ops->unresolved_rules when deleting a unresolved rule. Signed-off-by: Zheng Yan <zheng.z.yan@intel.com> Acked-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-10-19net: validate HWTSTAMP ioctl parametersRichard Cochran
This patch adds a sanity check on the values provided by user space for the hardware time stamping configuration. If the values lie outside of the absolute limits, then the ioctl request will be denied. Signed-off-by: Richard Cochran <richard.cochran@omicron.at> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-10-19net: Move rcu_barrier from rollback_registered_many to netdev_run_todo.Eric W. Biederman
This patch moves the rcu_barrier from rollback_registered_many (inside the rtnl_lock) into netdev_run_todo (just outside the rtnl_lock). This allows us to gain the full benefit of sychronize_net calling synchronize_rcu_expedited when the rtnl_lock is held. The rcu_barrier in rollback_registered_many was originally a synchronize_net but was promoted to be a rcu_barrier() when it was found that people were unnecessarily hitting the 250ms wait in netdev_wait_allrefs(). Changing the rcu_barrier back to a synchronize_net is therefore safe. Since we only care about waiting for the rcu callbacks before we get to netdev_wait_allrefs() it is also safe to move the wait into netdev_run_todo. This was tested by creating and destroying 1000 tap devices and observing /proc/lock_stat. /proc/lock_stat reports this change reduces the hold times of the rtnl_lock by a factor of 10. There was no observable difference in the amount of time it takes to destroy a network device. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-10-19NFS: Get rid of nfs_restart_rpc()Trond Myklebust
It can trivially be replaced with rpc_restart_call_prepare. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2011-10-19tcp: use TCP_INIT_CWND in tcp_fixup_sndbuf()Eric Dumazet
Initial cwnd being 10 (TCP_INIT_CWND) instead of 3, change tcp_fixup_sndbuf() to get more than 16384 bytes (sysctl_tcp_wmem[1]) in initial sk_sndbuf Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-10-19net: Allow skb_recycle_check to be done in stagesAndy Fleming
skb_recycle_check resets the skb if it's eligible for recycling. However, there are times when a driver might want to optionally manipulate the skb data with the skb before resetting the skb, but after it has determined eligibility. We do this by splitting the eligibility check from the skb reset, creating two inline functions to accomplish that task. Signed-off-by: Andy Fleming <afleming@freescale.com> Acked-by: David Daney <david.daney@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-10-19tproxy: copy transparent flag when creating a time waitKOVACS Krisztian
The transparent socket option setting was not copied to the time wait socket when an inet socket was being replaced by a time wait socket. This broke the --transparent option of the socket match and may have caused that FIN packets belonging to sockets in FIN_WAIT2 or TIME_WAIT state were being dropped by the packet filter. Signed-off-by: KOVACS Krisztian <hidden@balabit.hu> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-10-19net: add skb frag size accessorsEric Dumazet
To ease skb->truesize sanitization, its better to be able to localize all references to skb frags size. Define accessors : skb_frag_size() to fetch frag size, and skb_frag_size_{set|add|sub}() to manipulate it. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-10-18xfrm6: Don't call icmpv6_send on local errorSteffen Klassert
Calling icmpv6_send() on a local message size error leads to an incorrect update of the path mtu. So use xfrm6_local_rxpmtu() to notify about the pmtu if the IPV6_DONTFRAG socket option is set on an udp or raw socket, according RFC 3542 and use ipv6_local_error() otherwise. Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-10-18ipv6: Fix IPsec slowpath fragmentation problemSteffen Klassert
ip6_append_data() builds packets based on the mtu from dst_mtu(rt->dst.path). On IPsec the effective mtu is lower because we need to add the protocol headers and trailers later when we do the IPsec transformations. So after the IPsec transformations the packet might be too big, which leads to a slowpath fragmentation then. This patch fixes this by building the packets based on the lower IPsec mtu from dst_mtu(&rt->dst) and adapts the exthdr handling to this. Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-10-18ipv6: Remove superfluous NULL pointer check in ipv6_local_rxpmtuSteffen Klassert
The pointer to mtu_info is taken from the common buffer of the skb, thus it can't be a NULL pointer. This patch removes this check on mtu_info. Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-10-18xfrm: Simplify the replay check and advance functionsSteffen Klassert
The replay check and replay advance functions had some code duplications. This patch removes the duplications. Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-10-18net: allow vlan traffic to be received under bondJohn Fastabend
The following configuration used to work as I expected. At least we could use the fcoe interfaces to do MPIO and the bond0 iface to do load balancing or failover. ---eth2.228-fcoe | eth2 -----| | |---- bond0 | eth3 -----| | ---eth3.228-fcoe This worked because of a change we added to allow inactive slaves to rx 'exact' matches. This functionality was kept intact with the rx_handler mechanism. However now the vlan interface attached to the active slave never receives traffic because the bonding rx_handler updates the skb->dev and goto's another_round. Previously, the vlan_do_receive() logic was called before the bonding rx_handler. Now by the time vlan_do_receive calls vlan_find_dev() the skb->dev is set to bond0 and it is clear no vlan is attached to this iface. The vlan lookup fails. This patch moves the VLAN check above the rx_handler. A VLAN tagged frame is now routed to the eth2.228-fcoe iface in the above schematic. Untagged frames continue to the bond0 as normal. This case also remains intact, eth2 --> bond0 --> vlan.228 Here the skb is VLAN tagged but the vlan lookup fails on eth2 causing the bonding rx_handler to be called. On the second pass the vlan lookup is on the bond0 iface and completes as expected. Putting a VLAN.228 on both the bond0 and eth2 device will result in eth2.228 receiving the skb. I don't think this is completely unexpected and was the result prior to the rx_handler result. Note, the same setup is also used for other storage traffic that MPIO is used with eg. iSCSI and similar setups can be contrived without storage protocols. Signed-off-by: John Fastabend <john.r.fastabend@intel.com> Acked-by: Jesse Gross <jesse@nicira.com> Reviewed-by: Jiri Pirko <jpirko@redhat.com> Tested-by: Hans Schillstrom <hams.schillstrom@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-10-18bluetooth: Properly clone LSM attributes to newly created child connectionsPaul Moore
The Bluetooth stack has internal connection handlers for all of the various Bluetooth protocols, and unfortunately, they are currently lacking the LSM hooks found in the core network stack's connection handlers. I say unfortunately, because this can cause problems for users who have have an LSM enabled and are using certain Bluetooth devices. See one problem report below: * http://bugzilla.redhat.com/show_bug.cgi?id=741703 In order to keep things simple at this point in time, this patch fixes the problem by cloning the parent socket's LSM attributes to the newly created child socket. If we decide we need a more elaborate LSM marking mechanism for Bluetooth (I somewhat doubt this) we can always revisit this decision in the future. Reported-by: James M. Cape <jcape@ignore-your.tv> Signed-off-by: Paul Moore <pmoore@redhat.com> Acked-by: James Morris <jmorris@namei.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-10-18l2tp: give proper headroom in pppol2tp_xmit()Eric Dumazet
pppol2tp_xmit() calls skb_cow_head(skb, 2) before calling l2tp_xmit_skb() Then l2tp_xmit_skb() calls again skb_cow_head(skb, large_headroom) This patchs changes the first skb_cow_head() call to supply the needed headroom to make sure at most one (expensive) pskb_expand_head() is done. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-10-18l2tp: fix a potential skb leak in l2tp_xmit_skb()Eric Dumazet
l2tp_xmit_skb() can leak one skb if skb_cow_head() returns an error. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-10-18bridge: fix hang on removal of bridge via netlinkstephen hemminger
Need to cleanup bridge device timers and ports when being bridge device is being removed via netlink. This fixes the problem of observed when doing: ip link add br0 type bridge ip link set dev eth1 master br0 ip link set br0 up ip link del br0 which would cause br0 to hang in unregister_netdev because of leftover reference count. Reported-by: Sridhar Samudrala <sri@us.ibm.com> Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Acked-by: Sridhar Samudrala <sri@us.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-10-18macvlan: handle fragmented multicast framesEric Dumazet
Fragmented multicast frames are delivered to a single macvlan port, because ip defrag logic considers other samples are redundant. Implement a defrag step before trying to send the multicast frame. Reported-by: Ben Greear <greearb@candelatech.com> Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-10-18batman-adv: correctly set the data field in the TT_REPONSE packetAntonio Quartulli
In the TT_RESPONSE packet, the number of carried entries is not correctly set. This leads to a wrong interpretation of the packet payload on the receiver side causing random entries to be added to the global translation table. Therefore the latter gets always corrupted, triggering a table recovery all the time. Signed-off-by: Antonio Quartulli <ordex@autistici.org> Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
2011-10-18batman-adv: fix tt_local_reset_flags() functionAntonio Quartulli
Currently the counter of tt_local_entry structures (tt_local_num) is incremented each time the tt_local_reset_flags() is invoked causing the node to send wrong TT_REPONSE packets containing a copy of non-initialised memory thus corrupting other nodes global translation table and making higher level communication impossible. Reported-by: Junkeun Song <jun361@gmail.com> Signed-off-by: Antonio Quartulli <ordex@autistici.org> Acked-by: Junkeun Song <jun361@gmail.com> Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
2011-10-18SUNRPC: Remove unnecessary export of rpc_sockaddr2uaddrTrond Myklebust
It is only used internally by the RPC code. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2011-10-18SUNRPC: Fix rpc_sockaddr2uaddrTrond Myklebust
rpc_sockaddr2uaddr is only used by net/sunrpc/rpcb_clnt.c, where it is used in a non-blockable context in at least one case. Add non-blocking capability by adding a gfp_t argument Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2011-10-18SUNRPC/NFS: make rpc pipe upcall genericPeng Tao
The same function is used by idmap, gss and blocklayout code. Make it generic. Signed-off-by: Peng Tao <peng_tao@emc.com> Signed-off-by: Jim Rees <rees@umich.edu> Cc: stable@kernel.org [3.0] Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2011-10-17Merge branch 'nf' of git://1984.lsi.us.es/netDavid S. Miller
2011-10-17x25: Prevent skb overreads when checking call user dataMatthew Daley
x25_find_listener does not check that the amount of call user data given in the skb is big enough in per-socket comparisons, hence buffer overreads may occur. Fix this by adding a check. Signed-off-by: Matthew Daley <mattjd@gmail.com> Cc: Eric Dumazet <eric.dumazet@gmail.com> Cc: Andrew Hendry <andrew.hendry@gmail.com> Cc: stable <stable@kernel.org> Acked-by: Andrew Hendry <andrew.hendry@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-10-17x25: Handle undersized/fragmented skbsMatthew Daley
There are multiple locations in the X.25 packet layer where a skb is assumed to be of at least a certain size and that all its data is currently available at skb->data. These assumptions are not checked, hence buffer overreads may occur. Use pskb_may_pull to check these minimal size assumptions and ensure that data is available at skb->data when necessary, as well as use skb_copy_bits where needed. Signed-off-by: Matthew Daley <mattjd@gmail.com> Cc: Eric Dumazet <eric.dumazet@gmail.com> Cc: Andrew Hendry <andrew.hendry@gmail.com> Cc: stable <stable@kernel.org> Acked-by: Andrew Hendry <andrew.hendry@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-10-17x25: Validate incoming call user data lengthsMatthew Daley
X.25 call user data is being copied in its entirety from incoming messages without consideration to the size of the destination buffers, leading to possible buffer overflows. Validate incoming call user data lengths before these copies are performed. It appears this issue was noticed some time ago, however nothing seemed to come of it: see http://www.spinics.net/lists/linux-x25/msg00043.html and commit 8db09f26f912f7c90c764806e804b558da520d4f. Signed-off-by: Matthew Daley <mattjd@gmail.com> Acked-by: Eric Dumazet <eric.dumazet@gmail.com> Tested-by: Andrew Hendry <andrew.hendry@gmail.com> Cc: stable <stable@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-10-17ipv6: remove a rcu_read_lock in ndisc_constructorRoy.Li
in6_dev_get(dev) takes a reference on struct inet6_dev, we dont need rcu locking in ndisc_constructor() Signed-off-by: Roy.Li <rongqing.li@windriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-10-17can: remove references to berlios mailinglistMarc Kleine-Budde
The BerliOS project, which currently hosts our mailinglist, will close with the end of the year. Now take the chance and remove all occurrences of the mailinglist address from the source files. Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-10-17net/flow: Fix potential memory leakhuajun li
While preparing net flow caches, once a fail may cause potential memory leak , fix it. Signed-off-by: Huajun Li <huajun.li.lee@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-10-17Merge branch 'master' of ↵John W. Linville
git://git.infradead.org/users/linville/wireless-next into for-davem
2011-10-16if_link: Add additional parameter to IFLA_VF_INFO for spoof checkingGreg Rose
Add configuration setting for drivers to turn spoof checking on or off for discrete VFs. v2 - Fix indentation problem, wrap the ifla_vf_info structure in #ifdef __KERNEL__ to prevent user space from accessing and change function paramater for the spoof check setting netdev op from u8 to bool. v3 - Preset spoof check setting to -1 so that user space tools such as ip can detect that the driver didn't report a spoofcheck setting. Prevents incorrect display of spoof check settings for drivers that don't report it. Signed-off-by: Greg Rose <gregory.v.rose@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-10-14mac80211: Provide station flags to cfg80211Helmut Schaa
Only station flags that are already defined in nl80211 are added for now. Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-10-14nl80211: Add sta_flags to the station infoHelmut Schaa
Reuse the already existing struct nl80211_sta_flag_update to specify both, a flag mask and the flag set itself. This means nl80211_sta_flag_update is now used for setting station flags and also for getting station flags. Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-10-14mac80211: fix TID for null poll responseJohannes Berg
The queue mapping/TID for non-QoS null data responses to is never set, making it default to BK. Fix that. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-10-14mac80211: reformat TX unauthorised checkJohannes Berg
Reformat the check, the indentation is completely strange. Also change the last part of the condition to make the code shorter. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-10-14mac80211: Populate radiotap header with MCS info for TX framesHelmut Schaa
mac80211 already filled in the MCS rate info for rx'ed frames but tx'ed frames that are sent to a monitor interface during the status callback lack this information. Add the radiotap fields for MCS info to ieee80211_tx_status_rtap_hdr and populate them when sending tx'ed frames to the monitors. The needed headroom is only extended by one byte since we don't include legacy rate information in the rtap header for HT frames. Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-10-14mac80211: Build TX radiotap header dynamicallyHelmut Schaa
Get rid of the ieee80211_tx_status_rtap_hdr struct and instead build the rtap header dynamically. This makes it easier to extend the rtap header generation in the future. Add ieee80211_tx_radiotap_len to calculate the expected size of the rtap header before generating it. Since we can't check if the rtap header fits into the requested headroom during compile time anymore add a WARN_ON_ONCE. Also move the actual rtap header generation into its own function. Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-10-13net: more accurate skb truesizeEric Dumazet
skb truesize currently accounts for sk_buff struct and part of skb head. kmalloc() roundings are also ignored. Considering that skb_shared_info is larger than sk_buff, its time to take it into account for better memory accounting. This patch introduces SKB_TRUESIZE(X) macro to centralize various assumptions into a single place. At skb alloc phase, we put skb_shared_info struct at the exact end of skb head, to allow a better use of memory (lowering number of reallocations), since kmalloc() gives us power-of-two memory blocks. Unless SLUB/SLUB debug is active, both skb->head and skb_shared_info are aligned to cache lines, as before. Note: This patch might trigger performance regressions because of misconfigured protocol stacks, hitting per socket or global memory limits that were previously not reached. But its a necessary step for a more accurate memory accounting. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> CC: Andi Kleen <ak@linux.intel.com> CC: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.25.1) at 2024-07-15 09:07:08 +0000