aboutsummaryrefslogtreecommitdiff
path: root/scripts
AgeCommit message (Collapse)Author
2009-09-15sparc: Kill PROM console driver.David S. Miller
Many years ago when this driver was written, it had a use, but these days it's nothing but trouble and distributions should not enable it in any situation. Pretty much every console device a sparc machine could see has a bonafide real driver, making the PROM console hack unnecessary. If any new device shows up, we should write a driver instead of depending upon this crutch to save us. We've been able to take care of this even when no chip documentation exists (sunxvr500, sunxvr2500) so there are no excuses. Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-15Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tj/percpu * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/percpu: (46 commits) powerpc64: convert to dynamic percpu allocator sparc64: use embedding percpu first chunk allocator percpu: kill lpage first chunk allocator x86,percpu: use embedding for 64bit NUMA and page for 32bit NUMA percpu: update embedding first chunk allocator to handle sparse units percpu: use group information to allocate vmap areas sparsely vmalloc: implement pcpu_get_vm_areas() vmalloc: separate out insert_vmalloc_vm() percpu: add chunk->base_addr percpu: add pcpu_unit_offsets[] percpu: introduce pcpu_alloc_info and pcpu_group_info percpu: move pcpu_lpage_build_unit_map() and pcpul_lpage_dump_cfg() upward percpu: add @align to pcpu_fc_alloc_fn_t percpu: make @dyn_size mandatory for pcpu_setup_first_chunk() percpu: drop @static_size from first chunk allocators percpu: generalize first chunk allocator selection percpu: build first chunk allocators selectively percpu: rename 4k first chunk allocator to page percpu: improve boot messages percpu: fix pcpu_reclaim() locking ... Fix trivial conflict as by Tejun Heo in kernel/sched.c
2009-09-14Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-2.6-kconfig * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-2.6-kconfig: kconfig: add missing dependency of conf to localyesconfig kconfig: test if a .config already exists kconfig: make local .config default for streamline_config kconfig: test for /boot/config-uname after /proc/config.gz in localconfig kconfig: unset IKCONFIG_PROC and clean up nesting kconfig: search for a config to base the local(mod|yes)config on kconfig: keep config.gz around even if CONFIG_IKCONFIG_PROC is not set kconfig: have extract-ikconfig read ELF files kconfig: add check if end exists in extract-ikconfig kconfig: enable CONFIG_IKCONFIG from streamline_config.pl kconfig: do not warn about modules built in kconfig: streamline_config.pl do not stop with no depends kconfig: add make localyesconfig option kconfig: make localmodconfig to run streamline_config.pl kconfig: add streamline_config.pl to scripts
2009-08-21kconfig: add missing dependency of conf to localyesconfigSteven Rostedt
There's a dependency missing. $ make localyesconfig HOSTCC scripts/basic/fixdep HOSTCC scripts/basic/docproc HOSTCC scripts/basic/hash using config: '/boot/config-2.6.27.25-78.2.56.fc9.x86_64' /bin/sh: line 8: scripts/kconfig/conf: No such file or directory make[1]: *** [localyesconfig] Error 127 make: *** [localyesconfig] Error 2 Thus the script failed to run. But the sed command that converts the '=m' to '=y' still ran. This gives us a distro config with all modules converted to built in! The missing dependency was for conf for localyesconfig. This dependency was already set for localmodconfig. Reported-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2009-08-18kconfig: test if a .config already existsSteven Rostedt
If one were to run localmodconfig or localyesconfig without having a .config already in the file, then the end of the process would give a warning when it tries to move the old .config to .config.old. This patch adds a test to check if .config exists and avoid the moves if it does not. [ Impact: remove warning after make localmodconfig ] Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2009-08-18kconfig: make local .config default for streamline_configSteven Rostedt
As Andi Kleen pointed out, most people would expect that the local .config file to be based for a streamline config. This patch changes the order of searching for a config file to consider the .config in the local directory first. Reported-by: Andi Kleen <andi@firstfloor.org> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2009-08-18kconfig: test for /boot/config-uname after /proc/config.gz in localconfigSteven Rostedt
Many distros put their config in /boot/config-`uname -r`, add a check for that right after /proc/config.gz Reported-by: Alan Jenkins <sourcejedi.lkml@googlemail.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2009-08-18kconfig: unset IKCONFIG_PROC and clean up nestingSteven Rostedt
Due to cut and paste error IKCONFIG was both set and cleared. It was suppose to be IKCONFIG_PROC to be cleared. Also cleaned up if nesting. Reported-by: Alan Jenkins <sourcejedi.lkml@googlemail.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2009-08-18kconfig: search for a config to base the local(mod|yes)config onSteven Rostedt
Instead of using the .config in the local directory. This patch changes streamline_config.pl to search various locations for a config. Here's the list and order of search: /proc/config.gz /boot/vmlinuz-`uname -r` vmlinux # local to the directory /lib/modules/`uname -r`/kernel/kernel/configs.ko kernel/configs.ko kernel/configs.o .config Once it finds a file that contains a config (it checks if the binary objects have configs first) it then uses it to create the .config with minimum modules needed. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2009-08-18kconfig: have extract-ikconfig read ELF filesSteven Rostedt
It would be nice to use extract-ikconfig to find the congfig.gz in either vmlinux (not vmlinuz) or configs.ko. This patch changes the script to also be able to read ELF files directly. [ Impact: find config.gz in vmlinux and configs.ko ] Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2009-08-18kconfig: add check if end exists in extract-ikconfigSteven Rostedt
Both start and end should be tested for existence before continuing to parse the config.gz file. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2009-08-18kconfig: enable CONFIG_IKCONFIG from streamline_config.plSteven Rostedt
Ingo Molnar suggested that the streamline_config.pl should enable CONFIG_IKCONFIG to keep the current config in the kernel. Then we can use scripts/extract-ikconfig to find the current modules. This patch changes streamline_config.pl to check if CONFIG_IKCONFIG is not set, and if it is not, it enables it to be a module. [ Impact: make current config options easier to find ] Reported-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2009-08-18kconfig: do not warn about modules built inSteven Rostedt
The streamline_config.pl finds all the configs that are needed to compile the currently loaded modules. After it creates the .config file, it tests to make sure all the configs that are needed were set. It only looks at the configs that are modules, it does not look at the builtin configs. This causes unnecessary warnings about modules not being covered. Reported-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2009-08-18kconfig: streamline_config.pl do not stop with no dependsSteven Rostedt
If a config does not have a prompt, it must be selected. streamline_config.pl keeps track of all configs that select other configs. If a config that does not have a prompt needs to be set to enable a current module, it will include all configs that select it. Note, streamline_config.pl does not enable modules that are not already enabled. It only keeps enabled those that were enabled and might be needed to compile the current modules. The code to find the selects of a config is after the code that adds the depends. But if a config needed selects but had no dependencies, it would not be set. Because the code would stop before getting to the select. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2009-08-18kconfig: add make localyesconfig optionSteven Rostedt
This adds the option localyesconfig to make. This is similar to localmodconfig, but after it removes unnecessary modules it runs sed -i s/=m/=y/ on the .config file. It then runs "make silentoldconfig" to fix any wholes that were created by the conversion of modules to core. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2009-08-18kconfig: make localmodconfig to run streamline_config.plSteven Rostedt
Running the streamline_config.pl script manually can still be confusing for some users. This patch adds the localmodconfig option. This will automatically run streamline_config.pl on the current .config and then run "make silentoldconfig" to fix any wholes that might have been created. $ make localmodconfig This will remove any module configurations in .config that are not needed to compile the modules that are loaded. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2009-08-18kconfig: add streamline_config.pl to scriptsSteven Rostedt
streamline_config.pl is a very powerful tool. For those that install a kernel to a new box using the config file from the distribution know that it can take forever to compile the kernel. Making a custom config file that will still boot your box, but bring down the compile time of the kernel can be quit painful, and to ask someone that reported a bug to do this can be a large burdon since that person may not even know how to build a kernel. This script will perform "lsmod" to find all the modules loaded on the current running system. It will read all the Makefiles to map which CONFIG enables a module. It will read the Kconfig files to find the dependencies and selects that may be needed to support a CONFIG. Finally, it reads the .config file and removes any module "=m" that is not needed to enable the currently loaded modules. The output goes to standard out. Here's a way to run the script. From the Linux directory that holds a distribution .config. $ scripts/kconfig/streamline_config.pl arch/x86/Kconfig > config-sl $ mv .config config-save $ mv config-sl .config $ make oldconfig Now you have a .config that will still build all your modules, but also take much less time to build the kernel. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2009-08-14Merge branch 'percpu-for-linus' into percpu-for-nextTejun Heo
Conflicts: arch/sparc/kernel/smp_64.c arch/x86/kernel/cpu/perf_counter.c arch/x86/kernel/setup_percpu.c drivers/cpufreq/cpufreq_ondemand.c mm/percpu.c Conflicts in core and arch percpu codes are mostly from commit ed78e1e078dd44249f88b1dd8c76dafb39567161 which substituted many num_possible_cpus() with nr_cpu_ids. As for-next branch has moved all the first chunk allocators into mm/percpu.c, the changes are moved from arch code to mm/percpu.c. Signed-off-by: Tejun Heo <tj@kernel.org>
2009-08-11Merge branch 'linus' into tracing/coreIngo Molnar
Conflicts: kernel/trace/trace_events_filter.c We use the tracing/core version. Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-08-09Merge branch 'linus' into tracing/urgentIngo Molnar
Merge reason: Merge up to almost-rc6 to pick up latest perfcounters (on which we'll queue up a dependent fix) Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-08-07tracing: Fix recordmcount.pl to handle sections with only weak functionsSteven Rostedt
Roland Dreier found that a section that contained only a weak function in one of the staging drivers and this caused recordmcount.pl to spit out a warning and fail. Although it is strange that a driver would have a weak function, and this function only be used in one place, it should not be something to make recordmcount.pl fail. This patch fixes the issue in a simple manner: if only weak functions exist in a section, then that section will not be recorded. Reported-by: Roland Dreier <rdreier@cisco.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-08-05tracing: do not use functions starting with .L in recordmcount.plSteven Rostedt
On Wed, 5 Aug 2009, Ingo Molnar wrote: > * Dave Airlie <airlied@gmail.com> wrote: > > > Hey, > > > > So I spent 3-4 hrs today (I'm stupid yes) tracking down a .o > > breakage by blaming rawhide gcc/binutils as I was using make > > V=1and seeing only the compiler chain running, > > Hm, is this that powerpc related build bug you just reported? Well we tracked it down and it is powerpc64 specific. Seems that in drivers/hwmon/lm93.c there's a function called: LM93_IN_FROM_REG() But PPC64 has function descriptors and the real function names (the ones you see in objdump) start with a '.'. Thus this in objdump you have: Disassembly of section .text: 0000000000000000 <.LM93_IN_FROM_REG>: 0: 7c 08 02 a6 mflr r0 4: fb 81 ff e0 std r28,-32(r1) The function name used is .LM93_IN_FROM_REG. But gcc considers symbols that start with ".L" as a special symbol that is used inside the assembly stage. The nm passed into recordmcount uses the --synthetic option which shows the ".L" symbols (my runs outside of the build did not include the --synthetic option, so my older patch worked). We see the function as a local. Now to capture all the locations that use "mcount" we need to have a reference to link into the object file a list of mcount callers. We need a reference that will not disappear. We try to use a global function and if that does not work, we use a local function as a reference. But to relink the section back into the object, we need to make it global. In this case, we run objcopy using --globalize-symbol and --localize-symbol to convert the symbol into a global symbol, link the mcount list, then convert it back to a local symbol. This works great except for this case. .L* symbols can not be converted into a global symbol, and the mcount section referencing it will remain unresolved. Reported-by: Dave Airlie <airlied@gmail.com> LKML-Reference: <alpine.DEB.2.00.0908052011590.5010@gandalf.stny.rr.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2009-08-04Merge branch 'tracing-fixes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'tracing-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: tracing: Fix missing function_graph events when we splice_read from trace_pipe tracing: Fix invalid function_graph entry trace: stop tracer in oops_enter() ftrace: Only update $offset when we update $ref_func ftrace: Fix the conditional that updates $ref_func tracing: only truncate ftrace files when O_TRUNC is set tracing: show proper address for trace-printk format
2009-08-04Merge branch 'tracing/fixes' of ↵Ingo Molnar
git://git.kernel.org/pub/scm/linux/kernel/git/frederic/random-tracing into tracing/urgent
2009-07-29get_maintainerpl-add-git-min-percent-option-fixJoe Perches
Allow an option to control the minimum percentage of sign-offs required before being considered a maintainer. git-min-percent has a default value of 5 Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-07-29get_maintainer.pl: Add git-min-percent optionJoe Perches
Allow an option to control the minimum percentage of sign-offs required before being considered a maintainer. git-min-percent has a default value of 5 Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-07-29scripts/get_maintainer.pl: Add -f directory useJoe Perches
Don't require a specific file in a directory to be tested. Also Arnd Bergmann pointed out that the MAINTAINERS pattern requirement that directory patterns have a trailing slash was unnecessary and was likely to be error prone. Removed that requirement. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-07-29markup_oops: fix it with 32-bit userspace on a 64-bit kernelMatthew Wilcox
A 32-bit perl can't handle 64-bit addresses without using the BigInt package. Signed-off-by: Matthew Wilcox <willy@linux.intel.com> Acked-by: Arjan van de Ven <arjan@linux.intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-07-23ftrace: Only update $offset when we update $ref_funcMatt Fleming
The value of $offset should be the offset of $ref_func from the beginning of the object file. Therefore, we should set both variables together. This fixes a bug I was hitting on sh where $offset (which is used to calcualte the addends for the __mcount_loc entries) was being set multiple times and didn't correspond to $ref_func's offset in the object file. The addends in __mcount_loc were calculated incorrectly, resulting in ftrace dynamically modifying addresses that weren't mcount call sites. Signed-off-by: Matt Fleming <matt@console-pimps.org> LKML-Reference: <1248365775-25196-2-git-send-email-matt@console-pimps.org> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2009-07-23ftrace: Fix the conditional that updates $ref_funcMatt Fleming
Fix the conditional that checks if we already have a $ref_func and that the new function is weak. The code as previously checking whether either condition was false, and we really need to only update $ref_func is both cconditions are false. Signed-off-by: Matt Fleming <matt@console-pimps.org> LKML-Reference: <1248365775-25196-1-git-send-email-matt@console-pimps.org> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2009-07-18tracing: Remove .globl in the scripts/recordmcount.pl docjolsa@redhat.com
I was reading throught the recordmcount.pl starting comment, and spotted a tiny discrepancy. The second example is about my_func not being global, but the example code has the ".globl my_func" statement just moved. Signed-off-by: Jiri Olsa <jolsa@redhat.com> Cc: rostedt@goodmis.org LKML-Reference: <1247773468-11594-4-git-send-email-jolsa@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-07-17kconfig: initialize the screen before using curses(3) functionsArnaud Lacombe
This is needed on non ncurses based implementation to get a properly initialized `stdscr' in main(). Cc: Roman Zippel <zippel@linux-m68k.org> Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2009-07-17kconfig: variable argument lists needs `stdarg.h'Arnaud Lacombe
Fix build on non GNU based platforms. Cc: Roman Zippel <zippel@linux-m68k.org> Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2009-07-17kbuild, deb-pkg: fix install scripts for posix shmaximilian attems
bash versus dash and posh disagree on expanding $@ within double quotes: export x="$@" see http://bugs.debian.org/381091 for details just use the arglist with $*. dpkg: error processing linux-image-2.6.31-rc1_2.6.31-rc1-18_i386.deb (--install): subprocess pre-installation script returned error exit status 2 export: 6: 2.6.31-rc1-18: bad variable name fixes http://bugzilla.kernel.org/show_bug.cgi?id=13567 seen on Ubuntu as there dash is the default sh, versus bash on Debian. Reported-by: Pauli <suokkos@gmail.com> Cc: Frans Pop <elendil@planet.nl> Signed-off-by: maximilian attems <max@stro.at> Acked-By: Andres Salomon <dilinger@collabora.co.uk>
2009-07-04Merge git://git.kernel.org/pub/scm/linux/kernel/git/sam/kbuild-fixesLinus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/sam/kbuild-fixes: kbuild: finally remove the obsolete variable $TOPDIR gitignore: ignore scripts/ihex2fw Kbuild: Disable the -Wformat-security gcc flag gitignore: ignore gcov output files kbuild: deb-pkg ship changelog Add new __init_task_data macro to be used in arch init_task.c files. asm-generic/vmlinux.lds.h: shuffle INIT_TASK* macro names in vmlinux.lds.h Add new macros for page-aligned data and bss sections. asm-generic/vmlinux.lds.h: Fix up RW_DATA_SECTION definition.
2009-07-04Merge branch 'master' into for-nextTejun Heo
Pull linus#master to merge PER_CPU_DEF_ATTRIBUTES and alpha build fix changes. As alpha in percpu tree uses 'weak' attribute instead of inline assembly, there's no need for __used attribute. Conflicts: arch/alpha/include/asm/percpu.h arch/mn10300/kernel/vmlinux.lds.S include/linux/percpu-defs.h
2009-07-01kernel-doc: move ignoring kmemcheckRandy Dunlap
Somehow I managed to generate a diff that put these 2 lines into the wrong function: should have been in dump_struct() instead of in dump_enum(). Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-30fbdev: work around old compiler bugStephen Rothwell
When building with a 4.1.x compiler on powerpc64 (at least) we get this error: drivers/video/logo/logo_linux_mono.c:81: error: logo_linux_mono causes a section type conflict This was introduced by commit ae52bb2384f721562f15f719de1acb8e934733cb ("fbdev: move logo externs to header file"). This is a partial revert of that commit sufficient to not hit the compiler bug. Also convert _clut arrays from __initconst to __initdata. Sam said: Al analysed this some time ago. When we say something is const then _sometimes_ gcc annotate the section as const(?) - sometimes not. So if we have two variables/functions annotated __*const and gcc decides to annotate the section const only in one case we get a section type conflict. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Krzysztof Helt <krzysztof.h1@poczta.fm> Cc: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com> Cc: Kyle McMartin <kyle@mcmartin.ca> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-27gitignore: ignore scripts/ihex2fwJaswinder Singh Rajput
scripts/ihex2fw is a generated binary and should be ignored Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com> Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2009-06-27kbuild: deb-pkg ship changelogmaximilian attems
In the series for 2.6.31 it was noticed to ship the copyright, but the generated changelog got lost somehow. As bonus the generated linux-image deb packages are Lenny lintian clean. Cc: Frans Pop <elendil@planet.nl> Cc: Andres Salomon <dilinger@debian.org> Signed-off-by: maximilian attems <max@stro.at> Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2009-06-26powerpc: Have git ignore generated files from dtc compileJon Smirl
Have git ignore generated files from dtc compile Signed-off-by: Jon Smirl <jonsmirl@gmail.com> Acked-by: David Gibson <david@gibson.dropbear.id.au> Acked-by: Sean MacLennan <smaclennan@pikatech.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-06-24linker script: throw away .discard sectionTejun Heo
x86 throws away .discard section but no other archs do. Also, .discard is not thrown away while linking modules. Make every arch and module linking throw it away. This will be used to define dummy variables for percpu declarations and definitions. This patch is based on Ivan Kokshaysky's alpha percpu patch. [ Impact: always throw away everything in .discard ] Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Cc: Richard Henderson <rth@twiddle.net> Cc: Russell King <linux@arm.linux.org.uk> Cc: Haavard Skinnemoen <hskinnemoen@atmel.com> Cc: Bryan Wu <cooloney@kernel.org> Cc: Mikael Starvik <starvik@axis.com> Cc: Jesper Nilsson <jesper.nilsson@axis.com> Cc: David Howells <dhowells@redhat.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Cc: Tony Luck <tony.luck@intel.com> Cc: Hirokazu Takata <takata@linux-m32r.org> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Michal Simek <monstr@monstr.eu> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Kyle McMartin <kyle@mcmartin.ca> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Paul Mundt <lethal@linux-sh.org> Cc: David S. Miller <davem@davemloft.net> Cc: Jeff Dike <jdike@addtoit.com> Cc: Chris Zankel <chris@zankel.net> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Ingo Molnar <mingo@elte.hu>
2009-06-20kernel-doc: fix param matching for array paramsRandy Dunlap
Fix function actual parameter vs. kernel-doc description matching so that a warning is not printed when it should not be: Warning(include/linux/etherdevice.h:199): Excess function parameter 'addr' description in 'is_etherdev_addr' Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2009-06-20kernel-doc: ignore kmemcheck_bitfield_begin/endRandy Dunlap
Teach kernel-doc to ignore kmemcheck_bitfield_{begin,end} sugar so that it won't generate warnings like this: Warning(include/net/sock.h:297): No description found for parameter 'kmemcheck_bitfield_begin(flags)' Warning(include/net/sock.h:297): No description found for parameter 'kmemcheck_bitfield_end(flags)' Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2009-06-20kallsyms: fix inverted valid symbol checkingMike Frysinger
The previous commit (17b1f0de) introduced a slightly broken consolidation of the memory text range checking. Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2009-06-20kbuild: fix build error during make htmldocsAmerigo Wang
Fix the following build error when do 'make htmldocs': DOCPROC Documentation/DocBook/debugobjects.xml exec /scripts/kernel-doc: No such file or directory exec /scripts/kernel-doc: No such file or directory Reported-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: WANG Cong <amwang@redhat.com> Acked-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2009-06-18gcov: add gcov profiling infrastructurePeter Oberparleiter
Enable the use of GCC's coverage testing tool gcov [1] with the Linux kernel. gcov may be useful for: * debugging (has this code been reached at all?) * test improvement (how do I change my test to cover these lines?) * minimizing kernel configurations (do I need this option if the associated code is never run?) The profiling patch incorporates the following changes: * change kbuild to include profiling flags * provide functions needed by profiling code * present profiling data as files in debugfs Note that on some architectures, enabling gcc's profiling option "-fprofile-arcs" for the entire kernel may trigger compile/link/ run-time problems, some of which are caused by toolchain bugs and others which require adjustment of architecture code. For this reason profiling the entire kernel is initially restricted to those architectures for which it is known to work without changes. This restriction can be lifted once an architecture has been tested and found compatible with gcc's profiling. Profiling of single files or directories is still available on all platforms (see config help text). [1] http://gcc.gnu.org/onlinedocs/gcc/Gcov.html Signed-off-by: Peter Oberparleiter <oberpar@linux.vnet.ibm.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Huang Ying <ying.huang@intel.com> Cc: Li Wei <W.Li@Sun.COM> Cc: Michael Ellerman <michaele@au1.ibm.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Heiko Carstens <heicars2@linux.vnet.ibm.com> Cc: Martin Schwidefsky <mschwid2@linux.vnet.ibm.com> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: WANG Cong <xiyou.wangcong@gmail.com> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Jeff Dike <jdike@addtoit.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-16Merge branch 'akpm'Linus Torvalds
* akpm: (182 commits) fbdev: bf54x-lq043fb: use kzalloc over kmalloc/memset fbdev: *bfin*: fix __dev{init,exit} markings fbdev: *bfin*: drop unnecessary calls to memset fbdev: bfin-t350mcqb-fb: drop unused local variables fbdev: blackfin has __raw I/O accessors, so use them in fb.h fbdev: s1d13xxxfb: add accelerated bitblt functions tcx: use standard fields for framebuffer physical address and length fbdev: add support for handoff from firmware to hw framebuffers intelfb: fix a bug when changing video timing fbdev: use framebuffer_release() for freeing fb_info structures radeon: P2G2CLK_ALWAYS_ONb tested twice, should 2nd be P2G2CLK_DAC_ALWAYS_ONb? s3c-fb: CPUFREQ frequency scaling support s3c-fb: fix resource releasing on error during probing carminefb: fix possible access beyond end of carmine_modedb[] acornfb: remove fb_mmap function mb862xxfb: use CONFIG_OF instead of CONFIG_PPC_OF mb862xxfb: restrict compliation of platform driver to PPC Samsung SoC Framebuffer driver: add Alpha Channel support atmel-lcdc: fix pixclock upper bound detection offb: use framebuffer_alloc() to allocate fb_info struct ... Manually fix up conflicts due to kmemcheck in mm/slab.c
2009-06-16fbdev: move logo externs to header fileGeert Uytterhoeven
Now we have __initconst, we can finally move the external declarations for the various Linux logo structures to <linux/linux_logo.h>. James' ack dates back to the previous submission (way to long ago), when the logos were still __initdata, which caused failures on some platforms with some toolchain versions. Signed-off-by: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com> Acked-by: James Simmons <jsimmons@infradead.org> Cc: Krzysztof Helt <krzysztof.h1@poczta.fm> Cc: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-16scripts/get_maintainer.pl: change "die" to "warn" when command line file is ↵Joe Perches
not a patch fixes git send-email with a cover letter Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>