aboutsummaryrefslogtreecommitdiff
path: root/sound/pci
AgeCommit message (Collapse)Author
2013-09-27ALSA: hda - Enable internal mic on a Thinkpad machine with ALC283Kailang Yang
More thorough testing showed that these verbs were necessary to improve quality of the internal mic. Patch originally from Realtek. BugLink: https://bugs.launchpad.net/bugs/1231931 Signed-off-by: David Henningsson <david.henningsson@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-09-27ALSA: hda - Fix Internal Mic boost can't control with ALC283Kailang Yang
ALC283 pin control for Line1 default control by hidden register. Use line1 as internal Mic will not get sound when boost value up. Set control by verb for hidden register will solve this issue. Signed-off-by: Kailang Yang <kailang@realtek.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-09-27ALSA: hda - Add fixup for MacBook Air 6,1 and 6,2 with CS4208 codecBen Whitten
This patch adds the default pin configuration and some init verbs for setting COEFs, in addition to the correction of input pin AMP caps for MacBook Air 6,1 and 6,2. With these changes, the headphone jack detection starts working properly. [trivial space fixes by tiwai] Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=60811 Signed-off-by: Ben Whitten <benwhitten@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-09-26ALSA : hda - not use assigned converters for all unused pinsMengdong Lin
BIOS can mark a pin as "no physical connection" if the port is used by an integrated display which is not audio capable. And audio driver will overlook such pins. On Haswell, such a disconneted pin will keep muted and connected to the 1st converter by default. But if the 1st convertor is assigned to a connected pin for audio streaming. The muted disconnected pin can make the connected pin no sound output. So this patch avoids using assigned converters for all unused pins for Haswell, including the disconected pins. Signed-off-by: Mengdong Lin <mengdong.lin@intel.com> Reviewed-by: David Henningsson <david.henningsson@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-09-12Merge tag 'sound-3.12' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull sound fixes from Takashi Iwai: "A few last-minute fixes for 3.12-rc1. All patches are driver specific. - HD-audio fixes: MacBook 6,1/6,2 speaker fix, ASUS TX300 dock speaker fix, Toshiba Satellite irq fix, Haswell HDMI audio cleanups) - ASoC fixes: atmel irq fix, fsl DT fix, mc13783 spi fix, kirkwood compatible string change, etc" * tag 'sound-3.12' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: ASoC: mc13783: add spi errata fix ASoC: rsnd: fixup flag name of rsnd_scu_platform_info ALSA: hda - Add CS4208 codec support for MacBook 6,1 and 6,2 ALSA: hda - Add Toshiba Satellite C870 to MSI blacklist ASoC: fsl_spdif: Select regmap-mmio ALSA: hda - unmute pin amplifier in infoframe setup for Haswell ALSA: hda - define is_haswell() to check if a display audio codec is Haswell ALSA: hda - Add dock speaker support for ASUS TX300 ASoC: kirkwood: change the compatible string of the kirkwood-i2s driver ASoC: atmel: disable error interrupt ASoC: fsl: imx-audmux: Do not call imx_audmux_parse_dt_defaults() on non-dt kernel
2013-09-11Merge tag 'asoc-v3.12-4' of ↵Takashi Iwai
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus ASoC: Fixes for v3.12 A few small fixes, nothing with any broad impact but all useful for the affected systems. The Kirkwood compatible string change is fixing up a string just added in the merge window so that we don't get any changes in released kernels.
2013-09-11Merge remote-tracking branch 'asoc/fix/fsl' into asoc-linusMark Brown
2013-09-09ALSA: hda - Add CS4208 codec support for MacBook 6,1 and 6,2Takashi Iwai
MacBook 6,1 and 6,2 have a CS4208 codec instead of CS4206/CS4207 on the former models. Most of functions work fine as is, except for the silent speaker output. After debugging sessions, it turned out that the machine needs to set GPIO 0 for the speaker amp. This patch adds the basic support for CS4208 and the fixup for these MacBooks. Basically the codec works just with the generic parser. For re-using the existing GPIO amp code and init/free callbacks, a few places have been changed so that CS4206/4207-specific codes (errata, etc) won't hit with CS4208. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=60811 Reported-and-tested-by: Imre Kaloz <kaloz@openwrt.org> Reported-and-tested-by: Ian Munsie <darkstarsword@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-09-09ALSA: hda - Add Toshiba Satellite C870 to MSI blacklistTakashi Iwai
Toshiba Satellite C870 shows interrupt problems occasionally when certain mixer controls like "Mic Switch" is toggled. This seems worked around by not using MSI. Bugzilla: https://bugzilla.novell.com/show_bug.cgi?id=833585 Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-09-06Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial Pull trivial tree from Jiri Kosina: "The usual trivial updates all over the tree -- mostly typo fixes and documentation updates" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (52 commits) doc: Documentation/cputopology.txt fix typo treewide: Convert retrun typos to return Fix comment typo for init_cma_reserved_pageblock Documentation/trace: Correcting and extending tracepoint documentation mm/hotplug: fix a typo in Documentation/memory-hotplug.txt power: Documentation: Update s2ram link doc: fix a typo in Documentation/00-INDEX Documentation/printk-formats.txt: No casts needed for u64/s64 doc: Fix typo "is is" in Documentations treewide: Fix printks with 0x%# zram: doc fixes Documentation/kmemcheck: update kmemcheck documentation doc: documentation/hwspinlock.txt fix typo PM / Hibernate: add section for resume options doc: filesystems : Fix typo in Documentations/filesystems scsi/megaraid fixed several typos in comments ppc: init_32: Fix error typo "CONFIG_START_KERNEL" treewide: Add __GFP_NOWARN to k.alloc calls with v.alloc fallbacks page_isolation: Fix a comment typo in test_pages_isolated() doc: fix a typo about irq affinity ...
2013-09-06ALSA: hda - unmute pin amplifier in infoframe setup for HaswellMengdong Lin
When Gfx driver reconnects a port and transcoder, the pin amplifier will be muted. To enable sound, the pin amp need to be unmuted. This patch - moves pin amp unmuting from stream preparing to hdmi_setup_audio_infoframe(). So if port:transcoder reconnection happens during stream playback, the ELDV unsol event can stil trigger pin's amp unmuting when re-setting up audio info frame. - remove reading pin amp status before unmuting for speed-up, since pin amp should always be unmuted. - rename haswell_verify_pin_D0() to haswell_verify_D0(), since the convertor power state is also fixed here. This patch is mostly based on suggestion of David Henningsson. Cc: David Henningsson <david.henningsson@canonical.com> Signed-off-by: Mengdong Lin <mengdong.lin@intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-09-06ALSA: hda - define is_haswell() to check if a display audio codec is HaswellMengdong Lin
To apply Haswell specific fixings, this patch defines is_haswell() to check whether a display audio codec is Haswell, to avoid explicitly checking Haswell vendor ID everywhere. Signed-off-by: Mengdong Lin <mengdong.lin@intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-09-06ALSA: hda - Add dock speaker support for ASUS TX300Takashi Iwai
ASUS TX300 has a built-in speaker in the tablet part and in the dock part, and the tablet speaker is supposed to be unused while the machine is docked. The current HD-audio driver, however, doesn't support the dock speaker, partly because BIOS doesn't set up the pin for the corresponding output. But, not only the missing pin config, also the missing unsol event handling is another issue. Otherwise the automatic switching via dock/undock won't work. Through debugging sessions, we found out that the dock speaker pin is NID 0x1b, and it generates an unsol event at docking/undocking, the docking state can be inquired via the normal pin detection verb. Also, it's turned out that GPIO 2 is needed as an amp. So, all materials are ready to cook. This patch provides the basic dock speaker support with TX300: - The dock speaker is turned on/off via "Dock Speaker" mixer mute. - The dock speaker is automatically muted when docked. This is independently from the mixer mute switch, just like the headphone auto-mute function. The implementation is a bit tricky. Since we want to handle it as a secondary speaker, we set it up a pin as a speaker with a jack detection. Then, the fixup function registers the own unsol callback for this pin because the standard automute can't handle the thing like a "speaker jack". In the own automute hook, we apply the mute of the tablet speaker in addition by checking the dock state. Also, the speaker control names are slightly shuffled because the generic parser doesn't give good names but blindly assumes a bass speaker as a secondary speaker. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=59791 Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-09-05Merge branch 'v4l_for_linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media Pull media updates from Mauro Carvalho Chehab: "This series contains: - Exynos s5p-mfc driver got support for VP8 encoder - Some SoC drivers gained support for asynchronous registration (needed for DT) - The RC subsystem gained support for RC activity LED; - New drivers added: a video decoder(adv7842), a video encoder (adv7511), a new GSPCA driver (stk1135) and support for Renesas R-Car (vsp1) - the first SDR kernel driver: mirics msi3101. Due to some troubles with the driver, and because the API is still under discussion, it will be merged at staging for 3.12. Need to rework on it - usual new boards additions, fixes, cleanups and driver improvements" * 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (242 commits) [media] cx88: Fix regression: CX88_AUDIO_WM8775 can't be 0 [media] exynos4-is: Fix entity unregistration on error path [media] exynos-gsc: Register v4l2 device [media] exynos4-is: Fix fimc-lite bayer formats [media] em28xx: fix assignment of the eeprom data [media] hdpvr: fix iteration over uninitialized lists in hdpvr_probe() [media] usbtv: Throw corrupted frames away [media] usbtv: Fix deinterlacing [media] v4l2: added missing mutex.h include to v4l2-ctrls.h [media] DocBook: upgrade media_api DocBook version to 4.2 [media] ml86v7667: fix compile warning: 'ret' set but not used [media] s5p-g2d: Fix registration failure [media] media: coda: Fix DT driver data pointer for i.MX27 [media] s5p-mfc: Fix input/output format reporting [media] v4l: vsp1: Fix mutex double lock at streamon time [media] v4l: vsp1: Add support for RT clock [media] v4l: vsp1: Initialize media device bus_info field [media] davinci: vpif_capture: fix error return code in vpif_probe() [media] davinci: vpif_display: fix error return code in vpif_probe() [media] MAINTAINERS: add entries for adv7511 and adv7842 ...
2013-09-05Merge branch 'drm-next' of git://people.freedesktop.org/~airlied/linuxLinus Torvalds
Pull drm tree changes from Dave Airlie: "This is the main drm pull request, I have some overlap with sound and arm-soc, the sound patch is acked and may conflict based on -next reports but should be a trivial fixup, which I'll leave to you! Highlights: - new drivers: MSM driver from Rob Clark - non-drm: switcheroo and hdmi audio driver support for secondary GPU poweroff, so drivers can use runtime PM to poweroff the GPUs. This can save 5 or 6W on some optimus laptops. - drm core: combined GEM and TTM VMA manager per-filp mmap permission tracking initial rendernode support (via a runtime enable for now, until we get api stable), remove old proc support, lots of cleanups of legacy code hdmi vendor infoframes and 4k modes lots of gem/prime locking and races fixes async pageflip scaffolding drm bridge objects - i915: Haswell PC8+ support and eLLC support, HDMI 4K support, initial per-process VMA pieces, watermark reworks, convert to generic hdmi infoframes, encoder reworking, fastboot support, - radeon: CIK PM support, remove 3d blit code in favour of DMA engines, Berlin GPU support, HDMI audio fixes - nouveau: secondary GPU power down support for optimus laptops, lots of fixes, use MSI, VP3 engine support - exynos: runtime pm support for g2d, DT support, remove non-DT, - tda998x i2c driver: lots of fixes for sync issues - gma500: lots of cleanups - rcar: add LVDS support, fbdev emulation, - tegra: just minor fixes" * 'drm-next' of git://people.freedesktop.org/~airlied/linux: (684 commits) drm/exynos: Fix build error with exynos_drm_connector.c drm/exynos: Remove non-DT support in exynos_drm_fimd drm/exynos: Remove non-DT support in exynos_hdmi drm/exynos: Remove non-DT support in exynos_drm_g2d drm/exynos: Remove non-DT support in exynos_hdmiphy drm/exynos: Remove non-DT support in exynos_ddc drm/exynos: Make Exynos DRM drivers depend on OF drm/exynos: Consider fallback option to allocation fail drm/exynos: fimd: move platform data parsing to separate function drm/exynos: fimd: get signal polarities from device tree drm/exynos: fimd: replace struct fb_videomode with videomode drm/exynos: check a pixel format to a particular window layer drm/exynos: fix fimd pixel format setting drm/exynos: Add NULL pointer check drm/exynos: Remove redundant error messages drm/exynos: Add missing of.h header include drm/exynos: Remove redundant NULL check in exynos_drm_buf drm/exynos: add device tree support for rotator drm/exynos: Add missing includes drm/exynos: add runtime pm interfaces to g2d driver ...
2013-09-04Merge tag 'sound-3.12' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull sound updates from Takashi Iwai: "Changes are seen in a wide range of codes, mainly due to ASoC DAPM requirements; HD-audio shows a high peak in diffstat, it's just a removal of bunch of old static quirks. Some highlights: - HDPM: Updates for AIO/RayDAT support, TCO/sync support - RME96: Add PCM sync support - HD-audio: * A few HDMI/DP audio updates (CA assignment fix, stream switching fix, Intel DP device list support) * Device specific fixes (ASUS/CXT HP mic support, Thinkpad mic improvements, Chromebook fixes, STAC9228 Dell fixes) * Replace the all static quirks for AD codecs with the generic parser * WAKEEN support for handling irqs in the power saving mode - USB-audio: Clean up implicit fb handling and related codes - DAPM is now mandatory for ASoC CODEC drivers; all existing drivers have had some level of DAPM support added. In addition, a lot of cleanups and improvements in DAPM. - Support for ASoC cross-platform compile test - New drivers and support for Analog Devices ADAU1702 and ADAU1401(a), Asahi Kasei Microdevices AK4554, Atmel AT91ASM9x5 and WM8904 based machines, Freescale S/PDIF and SSI AC'97, Renesas R-Car SoCs, Samsung Exynos5420 SoCs, Texas Instruments PCM1681 and PCM1792A and Wolfson Microelectronics WM8997 - DT bindings for kirkwood and i.MX S/PDIF - Clean up and bug fixes: ssm2602, rt5640 and sgtl5000. - Core helpers for bitbanged AC'97 reset" * tag 'sound-3.12' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (375 commits) ALSA: hda - Re-setup HDMI pin and audio infoframe on stream switches ALSA: hda - hdmi: Fallback to ALSA allocation when selecting CA ASoC: mxs-sgtl5000: Configure the dai_links as unidirectional ASoC: soc-pcm: Allow to specify unidirectional dai_link ASoC: fsl_spdif: Staticse non-exported symbols ASoC: ssm2602: Fix cache sync ASoC: Remove unused sysfs_registered field from snd_soc_codec struct ASoC: Remove unused debugfs_dapm field from snd_soc_{platform,codec} struct ASoC: Remove unused control_type field from snd_soc_codec struct ASoC: fsl: Add one blank space after ':=' in Makefile ASoC: fsl: Add wrapping for dev_dbg() in fsl_spdif.c ASoC: rt5640: change widget sequence for depop ASoC: dapm: Fix auto-disable for inverted controls ASoC: fsl: Drop SND_SOC_FSL_UTILS from SND_SOC_IMX_SPDIF ASoC: Samsung: Do not queue cyclic buffers multiple times ASoC: ep93xx-i2s: Remove unnecessary dev_set_drvdata() ASoC: designware_i2s: Remove unnecessary dev_set_drvdata() ASoC: fsl_spdif: remove redundant dev_err call in fsl_spdif_probe() ASoC: fsl: Add S/PDIF machine driver ASoc: kirkwood: Use the Kirkwood audio driver in Dove boards ...
2013-09-03ALSA: hda - Re-setup HDMI pin and audio infoframe on stream switchesTakashi Iwai
When the transcoder:port mapping on Haswell HDMI/DP audio is changed during the stream playback, the sound gets lost. Typically this problem is seen when the user switches the graphics mode from eDP+DP to DP-only configuration, where CRTC 1 is used for DP in the former while CRTC 0 is used for the latter. The graphics controller notifies the change via the normal ELD update procedure, so we get the intrinsic event. For enabling the sound again, the HDMI audio driver needs to reset the pin and set up the audio infoframe again. This patch achieves it by: - keep the current status of channels and info frame setup in per_pin struct, - check the reconnection in the intrinsic event handler, - reset the pin and the re-invoke hdmi_setup_audio_infoframe() accordingly. The hdmi_setup_audio_infoframe() function has been changed, too, so that it can be invoked without passing the substream instance. The patch is mostly based on the work by Mengdong Lin. Cc: Mengdong Lin <mengdong.lin@intel.com> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-09-02ALSA: hda - hdmi: Fallback to ALSA allocation when selecting CAAnssi Hannula
hdmi_channel_allocation() tries to find a HDMI channel allocation that matches the number channels in the playback stream and contains only speakers that the HDMI sink has reported as available via EDID. If no such allocation is found, 0 (stereo audio) is used. Using CA 0 causes the audio causes the sink to discard everything except the first two channels (front left and front right). However, the sink may be capable of receiving more channels than it has speakers (and then perform downmix or discard the extra channels), in which case it is preferable to use a CA that contains extra channels than to use CA 0 which discards all the non-stereo channels. Additionally, it seems that HBR (HD) passthrough output does not work on Intel HDMI codecs when CA is set to 0 (possibly the codec zeroes channels not present in CA). This happens with all receivers that report a 5.1 speaker mask since a HBR stream is carried on 8 channels to the codec. Add a fallback in the CA selection so that the CA channel count at least matches the stream channel count, even if the stream contains channels not present in the sink speaker descriptor. Thanks to GrimGriefer at OpenELEC forums for discovering that changing the sink speaker mask allowed HBR output. Reported-by: GrimGriefer Reported-by: Ashecrow Reported-by: Frank Zafka <kafkaesque1978@gmail.com> Reported-by: Peter Frühberger <fritsch@xbmc.org> Signed-off-by: Anssi Hannula <anssi.hannula@iki.fi> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-09-02Merge branch 'drm-next-3.12' of git://people.freedesktop.org/~agd5f/linux ↵Dave Airlie
into drm-next Alex writes: This is the radeon drm-next request. Big changes include: - support for dpm on CIK parts - support for ASPM on CIK parts - support for berlin GPUs - major ring handling cleanup - remove the old 3D blit code for bo moves in favor of CP DMA or sDMA - lots of bug fixes [airlied: fix up a bunch of conflicts from drm_order removal] * 'drm-next-3.12' of git://people.freedesktop.org/~agd5f/linux: (898 commits) drm/radeon/dpm: make sure dc performance level limits are valid (CI) drm/radeon/dpm: make sure dc performance level limits are valid (BTC-SI) (v2) drm/radeon: gcc fixes for extended dpm tables drm/radeon: gcc fixes for kb/kv dpm drm/radeon: gcc fixes for ci dpm drm/radeon: gcc fixes for si dpm drm/radeon: gcc fixes for ni dpm drm/radeon: gcc fixes for trinity dpm drm/radeon: gcc fixes for sumo dpm drm/radeonn: gcc fixes for rv7xx/eg/btc dpm drm/radeon: gcc fixes for rv6xx dpm drm/radeon: gcc fixes for radeon_atombios.c drm/radeon: enable UVD interrupts on CIK drm/radeon: fix init ordering for r600+ drm/radeon/dpm: only need to reprogram uvd if uvd pg is enabled drm/radeon: check the return value of uvd_v1_0_start in uvd_v1_0_init drm/radeon: split out radeon_uvd_resume from uvd_v4_2_resume radeon kms: fix uninitialised hotplug work usage in r100_irq_process() drm/radeon/audio: set up the sads on DCE3.2 asics drm/radeon: fix handling of variable sized arrays for router objects ... Conflicts: drivers/gpu/drm/i915/i915_dma.c drivers/gpu/drm/i915/i915_gem_dmabuf.c drivers/gpu/drm/i915/intel_pm.c drivers/gpu/drm/radeon/cik.c drivers/gpu/drm/radeon/ni.c drivers/gpu/drm/radeon/r600.c
2013-08-29snd/hda: add runtime suspend/resume on optimus support (v4)Dave Airlie
Add support for HDMI audio device on VGA cards that powerdown to D3cold using non-standard ACPI/PCI infrastructure (optimus). This does a couple of things to make it work: a) add a set of power ops for the hdmi domain, and enables them via vga_switcheroo when we are a switcheroo controlled card. This just replaces the runtime resume operation so that when the card is in D3cold the userspace pci config space access via sysfs, the vga switcheroon runtime resume gets called first and it calls the GPU resume callback before calling the sound card runtime resume. b) standard ACPI/PCI stacks won't put a device into D3cold without an ACPI handle, but since the hdmi audio devices on gpus don't have an ACPI handle, we need to manually force the device into D3cold after suspend from the switcheroo path only. c) don't try and do runtime s/r when the GPU is off. d) call runtime suspend/resume during switcheroo suspend/resume this is to make sure the runtime stack knows to try and resume the hdmi audio device for pci config space access. v2: fix incorrect runtime call suspend->resume. v3: rework irq handler to avoid false irq when we are resuming but haven't runtime resumed yet, don't bother trying D3cold, it won't work, just set it manually ourselves, move runtime s/r calls outside the main s/r hook. enable dnyamic pm properly by dropping reference. v4: put back irq handler check just wrap it with cap check Acked-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-08-27ALSA: hda - Simplify CONFIG_SND_HDA_I915 conditionTakashi Iwai
CONFIG_SND_HDA_I915 doesn't have to be user-selectable as this is almost mandatory when i915 driver is available. Let's enable it always when CONFIG_DRM_I915 is set, so that user won't be bothered by useless questions. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-08-27ALSA: hda - add device entry and inactive flag to unsolicited responseMengdong Lin
This patch adds two fields to unsolicited response, according to spec HDA040-A: - Device Entry (bit 20:15) - Inactive (bit 2) and show the info in debug message. Signed-off-by: Mengdong Lin <mengdong.lin@intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-08-27ALSA: hda - Haswell codec exposes device list/select info on pinsMengdong Lin
This patch is only to allow codec proc file to expose devices list/select info for Haswell codec pins. Since Haswell Gfx driver cannot support DP1.2 MST now, so all pins' device list is empty, meaning no pin is multi-streaming capaple. Signed-off-by: Mengdong Lin <mengdong.lin@intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-08-27ALSA: hda - add device list & select info of display pins to codec proc fileMengdong Lin
If a display codec supports multi-stream transport on the pins, the pin's device list length and device entries will be exposed to codec proc file. Signed-off-by: Mengdong Lin <mengdong.lin@intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-08-27ALSA: hda - add flags and routines to get devices selection info for DP1.2 MSTMengdong Lin
This patch adds flags and routines to get device list & selection info on a pin. To support Display Port 1.2 multi-stream transport (MST) over single DP port, a pin can support multiple devices. Please refer to HD-A spec Document Change Notificaton HDA040-A. A display audio codec can set flag "dp_mst" in its patch, indicating its pins can support MST. But at runtime, a pin may not be multi-streaming capable and report the device list is empty, depending on Gfx driver configuration. Signed-off-by: Mengdong Lin <mengdong.lin@intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-08-27treewide: Fix printks with 0x%#Joe Perches
Using 0x%# emits 0x0x. Only one is necessary. Signed-off-by: Joe Perches <joe@perches.com> Acked-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2013-08-24[media] sound/pci/Kconfig: select RADIO_ADAPTERS if neededMauro Carvalho Chehab
As reported by kbuild test robot <fengguang.wu@intel.com>: warning: (SND_ES1968_RADIO && SND_FM801_TEA575X_BOOL) selects RADIO_TEA575X which has unmet direct dependencies (MEDIA_SUPPORT && RADIO_ADAPTERS && VIDEO_V4L2) That happens because a radio driver is selected, without selecting the RADIO_ADAPTERS menu. Reported-by: kbuild test robot <fengguang.wu@intel.com> Cc: Takashi Iwai <tiwai@suse.de> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2013-08-23Merge tag 'asoc-v3.12' of ↵Takashi Iwai
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-next ASoC: Updates for v3.12 - DAPM is now mandatory for CODEC drivers in order to avoid the repeated regressions in the special cases for non-DAPM CODECs and make it easier to integrate with other components on boards. All existing drivers have had some level of DAPM support added. - A lot of cleanups in DAPM plus support for maintaining controls in a specific state while a DAPM widget all contributed by Lars-Peter Clausen. - Core helpers for bitbanged AC'97 reset from Markus Pargmann. - New drivers and support for Analog Devices ADAU1702 and ADAU1401(a), Asahi Kasei Microdevices AK4554, Atmel AT91ASM9x5 and WM8904 based machines, Freescale S/PDIF and SSI AC'97, Renesas R-Car SoCs, Samsung Exynos5420 SoCs, Texas Instruments PCM1681 and PCM1792A and Wolfson Microelectronics WM8997. - Support for building drivers that can support it cross-platform for compile test.
2013-08-22alsa/rme96: Add missing inclusion of linux/vmalloc.hKnut Petersen
Signed-off-by: Knut Petersen <Knut_Petersen@t-online.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-08-22ALSA: hda - Fix NULL dereference with CONFIG_SND_DYNAMIC_MINORS=nTakashi Iwai
Without the dynamic minor assignment, HDMI codec may have less PCM instances than the number of pins, which eventually leads to Oops. Reported-by: Stratos Karafotis <stratosk@semaphore.gr> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-08-22ALSA: rme96: Check the return value of pci_enable_device() in resume callbackTakashi Iwai
Fixing warning message: sound/pci/rme96.c: In function ‘snd_rme96_resume’: sound/pci/rme96.c:2418:19: warning: ignoring return value of ‘pci_enable_device’, declared with attribute warn_unused_result [-Wunused-result] Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-08-22ALSA: hda - Add workarounds for pop-noise on Chromebook with ALC283Kailang Yang
The headphone automute on this machine triggers annoying pop noises. It seems that only the first DAC can be used, the secondary DAC always results in this problem. This patch disables the secondary DAC with a few additional workarounds. Signed-off-by: Kailang Yang <kailang@realtek.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-08-22ALSA: hda - Fix ALC283 headphone pop-noise betterKailang Yang
Fixed ALC283 D3 to D0 and D0 to D3 Headphone pop noise. The previous fix [c5177c86: ALSA: hda - Fix the noise after suspend on ALC283 codec] doesn't work sufficiently for some laptops. Signed-off-by: Kailang Yang <kailang@realtek.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-08-22ALSA: rme96: Add PM support v3Knut Petersen
Without proper power management handling, the first use of a Digi96/8 anytime after a suspend / resume cycle will start playback with distortions. v3: Abort if vmalloc() of suspend buffers fail, but do not leak memory in that case. [fixed wrong memory leak fix again -- tiwai] Signed-off-by: Knut Petersen <Knut_Petersen@t-online.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-08-19ALSA: hdspm - Use enums in hdspm_tco_ltc_frames()Adrian Knoth
This patch doesn't change functionality, it only improves readability and fixes a copy&paste error in a comment. Signed-off-by: Adrian Knoth <adi@drcomp.erfurt.thur.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-08-19ALSA: hdspm - Fix default value in SNDRV_HDSPM_IOCTL_GET_LTCAdrian Knoth
Use enum hdspm_ltc_format's fps_30 (corresponds to 4) instead of 30, Other case branches return 1, 2 or 3 respectively, so 30 obviously is wrong. Since SNDRV_HDSPM_IOCTL_GET_LTC had never been working due to a copy&paste error in hdspm.h, this change doesn't break userspace. Signed-off-by: Adrian Knoth <adi@drcomp.erfurt.thur.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-08-19ALSA: hda - Add inverted digital mic fixup for Acer Aspire OneTakashi Iwai
Yet another entry, just use the existing fixup for this machine, too. Reported-by: "Nathanael D. Noblet" <nathanael@gnat.ca> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-08-19ALSA: hda - Try to allow haswell HDMI audio even without powerwellDavid Henningsson
If compiled without CONFIG_SND_HDA_I915, the audio driver cannot request power well. However, if the power well is on for other reasons, maybe audio can still work. Therefore, do not skip the card completely if compiled without CONFIG_SND_HDA_I915. Signed-off-by: David Henningsson <david.henningsson@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-08-19ALSA: hda - Limit internal mic boost for a few more Thinkpad machinesDavid Henningsson
The higher mic boosts (on internal mic) are so noisy they're unusable in practice. BugLink: https://bugs.launchpad.net/bugs/1213820 Signed-off-by: David Henningsson <david.henningsson@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-08-18[media] tea575x: Move from sound to mediaOndrej Zary
Move tea575x from sound/i2c/other to drivers/media/radio Includes Kconfig changes by Hans Verkuil. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Ondrej Zary <linux@rainbow-software.org> Acked-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2013-08-18[media] tea575x: Move header from sound to mediaOndrej Zary
Move include/sound/tea575x-tuner.h to include/media/tea575x.h and update files that include it. Signed-off-by: Ondrej Zary <linux@rainbow-software.org> Acked-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2013-08-16ALSA: hda - Fix the order of a quirk table (janitorial)David Henningsson
This just cleans up the table, no functional changes. Signed-off-by: David Henningsson <david.henningsson@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-08-16ALSA: hda - Fix internal mic boost on three Thinkpad machinesDavid Henningsson
The internal mic boost is so noisy on boosts 2 and 3 so they are unusable in practice. BugLink: https://bugs.launchpad.net/bugs/1213055 Signed-off-by: David Henningsson <david.henningsson@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-08-16ALSA: hda - Add a fixup for Gateway LT27Takashi Iwai
Gateway LT27 needs a fixup for the inverted digital mic. Reported-by: "Nathanael D. Noblet" <nathanael@gnat.ca> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-08-14ALSA: rme96: Add pcm stream synchronizationKnut Petersen
The hardware does support synchronized start/pause/stop of pcm streams, so there is no reason not to add that feature after more than ten years. Some minor coding style / white space fixes in the surroundings of the changes. Signed-off-by: Knut Petersen <Knut_Petersen@t-online.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-08-13ALSA: hda - Mute the right widget in auto_mute_via_amp modeTakashi Iwai
The current generic parser code assumes that always a pin widget controls the mute for an output blindly although it might be a different widget in the middle. Instead of the fixed assumption, check each parsed path and just pick up the right widget that has been already defined as a mute control. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-08-13ALSA: hda - Allow auto_mute_via_amp on bind mute controlsTakashi Iwai
The auto-mute using the amp currently works only for a single amp on a pin. Make it working also with HDA_CTL_BIND_MUTE type, too. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-08-12ALSA: hda - Fix missing mute controls for CX5051Takashi Iwai
We've added a fake mute control (setting the amp volume to zero) for CX5051 at commit [3868137e: ALSA: hda - Add a fake mute feature], but this feature was overlooked in the generic parser implementation. Now the driver lacks of mute controls on these codecs. The fix is just to check both AC_AMPCAP_MUTE and AC_AMPCAP_MIN_MUTE bits in each place checking the amp capabilities. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=59001 Cc: <stable@vger.kernel.org> [v3.9+] Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-08-12ALSA: hda - Add pinfix for LG LW25 laptopTakashi Iwai
Correct the pins for a line-in and a headphone on LG LW25 laptop with ALC880 codec. Other pins seem fine. Reported-and-tested-by: Joonas Saarinen <jonskunator@gmail.com> Cc: <stable@vger.kernel.org> [v3.9+] Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-08-05ALSA: hda - Fix jack gating when auto_{mute,mic} is suppressed.Chih-Chung Chang
The snd_hda_jack_set_gating_jack() call didn't work when auto_{mute,mic} is suppressed because (1) am_entry is not filled with nid of the mic pin. (2) The jacks are not created (by snd_hda_jack_detect_enable_callback) before the snd_hda_jack_set_gating_jack call. Now we use the first input pin nid directly, and create the jack if it doesn't exist yet. Signed-off-by: Chih-Chung Chang <chihchung@chromium.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>