aboutsummaryrefslogtreecommitdiff
path: root/tools
AgeCommit message (Collapse)Author
2013-03-06efivars: efivarfs_valid_name() should handle pstore syntaxMatt Fleming
Stricter validation was introduced with commit da27a24383b2b ("efivarfs: guid part of filenames are case-insensitive") and commit 47f531e8ba3b ("efivarfs: Validate filenames much more aggressively"), which is necessary for the guid portion of efivarfs filenames, but we don't need to be so strict with the first part, the variable name. The UEFI specification doesn't impose any constraints on variable names other than they be a NULL-terminated string. The above commits caused a regression that resulted in users seeing the following message, $ sudo mount -v /sys/firmware/efi/efivars mount: Cannot allocate memory whenever pstore EFI variables were present in the variable store, since their variable names failed to pass the following check, /* GUID should be right after the first '-' */ if (s - 1 != strchr(str, '-')) as a typical pstore filename is of the form, dump-type0-10-1-<guid>. The fix is trivial since the guid portion of the filename is GUID_LEN bytes, we can use (len - GUID_LEN) to ensure the '-' character is where we expect it to be. (The bogus ENOMEM error value will be fixed in a separate patch.) Reported-by: Joseph Yasi <joe.yasi@gmail.com> Tested-by: Joseph Yasi <joe.yasi@gmail.com> Reported-by: Lingzhu Xiang <lxiang@redhat.com> Cc: Josh Boyer <jwboyer@redhat.com> Cc: Jeremy Kerr <jk@ozlabs.org> Cc: Matthew Garrett <mjg59@srcf.ucam.org> Cc: <stable@vger.kernel.org> # v3.8 Signed-off-by: Matt Fleming <matt.fleming@intel.com>
2013-03-03Merge tag 'metag-v3.9-rc1-v4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jhogan/metag Pull new ImgTec Meta architecture from James Hogan: "This adds core architecture support for Imagination's Meta processor cores, followed by some later miscellaneous arch/metag cleanups and fixes which I kept separate to ease review: - Support for basic Meta 1 (ATP) and Meta 2 (HTP) core architecture - A few fixes all over, particularly for symbol prefixes - A few privilege protection fixes - Several cleanups (setup.c includes, split out a lot of metag_ksyms.c) - Fix some missing exports - Convert hugetlb to use vm_unmapped_area() - Copy device tree to non-init memory - Provide dma_get_sgtable()" * tag 'metag-v3.9-rc1-v4' of git://git.kernel.org/pub/scm/linux/kernel/git/jhogan/metag: (61 commits) metag: Provide dma_get_sgtable() metag: prom.h: remove declaration of metag_dt_memblock_reserve() metag: copy devicetree to non-init memory metag: cleanup metag_ksyms.c includes metag: move mm/init.c exports out of metag_ksyms.c metag: move usercopy.c exports out of metag_ksyms.c metag: move setup.c exports out of metag_ksyms.c metag: move kick.c exports out of metag_ksyms.c metag: move traps.c exports out of metag_ksyms.c metag: move irq enable out of irqflags.h on SMP genksyms: fix metag symbol prefix on crc symbols metag: hugetlb: convert to vm_unmapped_area() metag: export clear_page and copy_page metag: export metag_code_cache_flush_all metag: protect more non-MMU memory regions metag: make TXPRIVEXT bits explicit metag: kernel/setup.c: sort includes perf: Enable building perf tools for Meta metag: add boot time LNKGET/LNKSET check metag: add __init to metag_cache_probe() ...
2013-03-02perf: Enable building perf tools for MetaJames Hogan
Define rmb(), cpu_relax(), and CPUINFO_PROC for Meta so that the perf tools can be built for Meta. Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
2013-03-02Merge tag 'arc-v3.9-rc1-late' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc Pull new ARC architecture from Vineet Gupta: "Initial ARC Linux port with some fixes on top for 3.9-rc1: I would like to introduce the Linux port to ARC Processors (from Synopsys) for 3.9-rc1. The patch-set has been discussed on the public lists since Nov and has received a fair bit of review, specially from Arnd, tglx, Al and other subsystem maintainers for DeviceTree, kgdb... The arch bits are in arch/arc, some asm-generic changes (acked by Arnd), a minor change to PARISC (acked by Helge). The series is a touch bigger for a new port for 2 main reasons: 1. It enables a basic kernel in first sub-series and adds ptrace/kgdb/.. later 2. Some of the fallout of review (DeviceTree support, multi-platform- image support) were added on top of orig series, primarily to record the revision history. This updated pull request additionally contains - fixes due to our GNU tools catching up with the new syscall/ptrace ABI - some (minor) cross-arch Kconfig updates." * tag 'arc-v3.9-rc1-late' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc: (82 commits) ARC: split elf.h into uapi and export it for userspace ARC: Fixup the current ABI version ARC: gdbserver using regset interface possibly broken ARC: Kconfig cleanup tracking cross-arch Kconfig pruning in merge window ARC: make a copy of flat DT ARC: [plat-arcfpga] DT arc-uart bindings change: "baud" => "current-speed" ARC: Ensure CONFIG_VIRT_TO_BUS is not enabled ARC: Fix pt_orig_r8 access ARC: [3.9] Fallout of hlist iterator update ARC: 64bit RTSC timestamp hardware issue ARC: Don't fiddle with non-existent caches ARC: Add self to MAINTAINERS ARC: Provide a default serial.h for uart drivers needing BASE_BAUD ARC: [plat-arcfpga] defconfig for fully loaded ARC Linux ARC: [Review] Multi-platform image #8: platform registers SMP callbacks ARC: [Review] Multi-platform image #7: SMP common code to use callbacks ARC: [Review] Multi-platform image #6: cpu-to-dma-addr optional ARC: [Review] Multi-platform image #5: NR_IRQS defined by ARC core ARC: [Review] Multi-platform image #4: Isolate platform headers ARC: [Review] Multi-platform image #3: switch to board callback ...
2013-02-27hlist: drop the node parameter from iteratorsSasha Levin
I'm not sure why, but the hlist for each entry iterators were conceived list_for_each_entry(pos, head, member) The hlist ones were greedy and wanted an extra parameter: hlist_for_each_entry(tpos, pos, head, member) Why did they need an extra pos parameter? I'm not quite sure. Not only they don't really need it, it also prevents the iterator from looking exactly like the list iterator, which is unfortunate. Besides the semantic patch, there was some manual work required: - Fix up the actual hlist iterators in linux/list.h - Fix up the declaration of other iterators based on the hlist ones. - A very small amount of places were using the 'node' parameter, this was modified to use 'obj->member' instead. - Coccinelle didn't handle the hlist_for_each_entry_safe iterator properly, so those had to be fixed up manually. The semantic patch which is mostly the work of Peter Senna Tschudin is here: @@ iterator name hlist_for_each_entry, hlist_for_each_entry_continue, hlist_for_each_entry_from, hlist_for_each_entry_rcu, hlist_for_each_entry_rcu_bh, hlist_for_each_entry_continue_rcu_bh, for_each_busy_worker, ax25_uid_for_each, ax25_for_each, inet_bind_bucket_for_each, sctp_for_each_hentry, sk_for_each, sk_for_each_rcu, sk_for_each_from, sk_for_each_safe, sk_for_each_bound, hlist_for_each_entry_safe, hlist_for_each_entry_continue_rcu, nr_neigh_for_each, nr_neigh_for_each_safe, nr_node_for_each, nr_node_for_each_safe, for_each_gfn_indirect_valid_sp, for_each_gfn_sp, for_each_host; type T; expression a,c,d,e; identifier b; statement S; @@ -T b; <+... when != b ( hlist_for_each_entry(a, - b, c, d) S | hlist_for_each_entry_continue(a, - b, c) S | hlist_for_each_entry_from(a, - b, c) S | hlist_for_each_entry_rcu(a, - b, c, d) S | hlist_for_each_entry_rcu_bh(a, - b, c, d) S | hlist_for_each_entry_continue_rcu_bh(a, - b, c) S | for_each_busy_worker(a, c, - b, d) S | ax25_uid_for_each(a, - b, c) S | ax25_for_each(a, - b, c) S | inet_bind_bucket_for_each(a, - b, c) S | sctp_for_each_hentry(a, - b, c) S | sk_for_each(a, - b, c) S | sk_for_each_rcu(a, - b, c) S | sk_for_each_from -(a, b) +(a) S + sk_for_each_from(a) S | sk_for_each_safe(a, - b, c, d) S | sk_for_each_bound(a, - b, c) S | hlist_for_each_entry_safe(a, - b, c, d, e) S | hlist_for_each_entry_continue_rcu(a, - b, c) S | nr_neigh_for_each(a, - b, c) S | nr_neigh_for_each_safe(a, - b, c, d) S | nr_node_for_each(a, - b, c) S | nr_node_for_each_safe(a, - b, c, d) S | - for_each_gfn_sp(a, c, d, b) S + for_each_gfn_sp(a, c, d) S | - for_each_gfn_indirect_valid_sp(a, c, d, b) S + for_each_gfn_indirect_valid_sp(a, c, d) S | for_each_host(a, - b, c) S | for_each_host_safe(a, - b, c, d) S | for_each_mesh_entry(a, - b, c, d) S ) ...+> [akpm@linux-foundation.org: drop bogus change from net/ipv4/raw.c] [akpm@linux-foundation.org: drop bogus hunk from net/ipv6/raw.c] [akpm@linux-foundation.org: checkpatch fixes] [akpm@linux-foundation.org: fix warnings] [akpm@linux-foudnation.org: redo intrusive kvm changes] Tested-by: Peter Senna Tschudin <peter.senna@gmail.com> Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Signed-off-by: Sasha Levin <sasha.levin@oracle.com> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Marcelo Tosatti <mtosatti@redhat.com> Cc: Gleb Natapov <gleb@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-27selftests: add a simple docJeremy Kerr
This change adds a little documentation to the tests under tools/testing/selftests/, based on akpm's explanation. [akpm@linux-foundation.org: move from Documentation to tools/testing/selftests/README.txt] Signed-off-by: Jeremy Kerr <jk@ozlabs.org> Cc: Dave Young <dyoung@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-27tools/testing/selftests/Makefile: rearrange targetsAndrew Morton
Do it one-per-line to reduce patch conflict pain. Cc: Dave Young <dyoung@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-27selftests/efivarfs: add create-read testJeremy Kerr
Test that reads from a newly-created efivarfs file (with no data written) will return EOF. Signed-off-by: Jeremy Kerr <jk@ozlabs.org> Cc: Matt Fleming <matt.fleming@intel.com> Cc: Lingzhu Xiang <lxiang@redhat.com> Cc: Dave Young <dyoung@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-27selftests/efivarfs: add empty file creation testJeremy Kerr
Signed-off-by: Jeremy Kerr <jk@ozlabs.org> Cc: Matt Fleming <matt.fleming@intel.com> Cc: Lingzhu Xiang <lxiang@redhat.com> Cc: Dave Young <dyoung@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-27selftests: add tests for efivarfsJeremy Kerr
This change adds a few initial efivarfs tests to the tools/testing/selftests directory. The open-unlink test is based on code from Lingzhu Xiang. Signed-off-by: Jeremy Kerr <jk@ozlabs.org> Cc: Matt Fleming <matt.fleming@intel.com> Cc: Lingzhu Xiang <lxiang@redhat.com> Cc: Dave Young <dyoung@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-25Merge tag 'ktest-v3.9' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-ktest Pull ktest update from Steven Rostedt: "Added ability to have all builds test warnings. Fixed failing reboot when the reboot produces a non fatal error. Config reading fixes and other cleanups" * tag 'ktest-v3.9' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-ktest: ktest: Remove indexes from warnings check ktest: Ignore warnings during reboot ktest: Search for linux banner for successful reboot ktest: Add make_warnings_file and process full warnings ktest: Allow a test option to use its default option ktest: Strip off '\n' when reading which files were modified ktest: Do not require CONSOLE for build or install bisects
2013-02-21Merge tag 'char-misc-3.9-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc driver patches from Greg Kroah-Hartman: "Here's the big char/misc driver patches for 3.9-rc1. Nothing major here, just lots of different driver updates (mei, hyperv, ipack, extcon, vmci, etc.). All of these have been in the linux-next tree for a while." * tag 'char-misc-3.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (209 commits) w1: w1_therm: Add force-pullup option for "broken" sensors w1: ds2482: Added 1-Wire pull-up support to the driver vme: add missing put_device() after device_register() fails extcon: max8997: Use workqueue to check cable state after completing boot of platform extcon: max8997: Set default UART/USB path on probe extcon: max8997: Consolidate duplicate code for checking ADC/CHG cable type extcon: max8997: Set default of ADC debounce time during initialization extcon: max8997: Remove duplicate code related to set H/W line path extcon: max8997: Move defined constant to header file extcon: max77693: Make max77693_extcon_cable static extcon: max8997: Remove unreachable code extcon: max8997: Make max8997_extcon_cable static extcon: max77693: Remove unnecessary goto statement to improve readability extcon: max77693: Convert to devm_input_allocate_device() extcon: gpio: Rename filename of extcon-gpio.c according to kernel naming style CREDITS: update email and address of Harald Hoyer extcon: arizona: Use MICDET for final microphone identification extcon: arizona: Always take the first HPDET reading as the final one extcon: arizona: Clear _trig_sts bits after jack detection extcon: arizona: Don't HPDET magic when headphones are enabled ...
2013-02-21Merge tag 'usb-3.9-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB patches from Greg Kroah-Hartman: "Here's the big USB merge for 3.9-rc1 Nothing major, lots of gadget fixes, and of course, xhci stuff. All of this has been in linux-next for a while, with the exception of the last 3 patches, which were reverts of patches in the tree that caused problems, they went in yesterday." * tag 'usb-3.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (190 commits) Revert "USB: EHCI: make ehci-vt8500 a separate driver" Revert "USB: EHCI: make ehci-orion a separate driver" Revert "USB: update host controller Kconfig entries" USB: update host controller Kconfig entries USB: EHCI: make ehci-orion a separate driver USB: EHCI: make ehci-vt8500 a separate driver USB: usb-storage: unusual_devs update for Super TOP SATA bridge USB: ehci-omap: Fix autoloading of module USB: ehci-omap: Don't free gpios that we didn't request USB: option: add Huawei "ACM" devices using protocol = vendor USB: serial: fix null-pointer dereferences on disconnect USB: option: add Yota / Megafon M100-1 4g modem drivers/usb: add missing GENERIC_HARDIRQS dependencies USB: storage: properly handle the endian issues of idProduct testusb: remove all mentions of 'usbfs' usb: gadget: imx_udc: make it depend on BROKEN usb: omap_control_usb: fix compile warning ARM: OMAP: USB: Add phy binding information ARM: OMAP2: MUSB: Specify omap4 has mailbox ARM: OMAP: devices: create device for usb part of control module ...
2013-02-21Merge tag 'driver-core-3.9-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core patches from Greg Kroah-Hartman: "Here is the big driver core merge for 3.9-rc1 There are two major series here, both of which touch lots of drivers all over the kernel, and will cause you some merge conflicts: - add a new function called devm_ioremap_resource() to properly be able to check return values. - remove CONFIG_EXPERIMENTAL Other than those patches, there's not much here, some minor fixes and updates" Fix up trivial conflicts * tag 'driver-core-3.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (221 commits) base: memory: fix soft/hard_offline_page permissions drivercore: Fix ordering between deferred_probe and exiting initcalls backlight: fix class_find_device() arguments TTY: mark tty_get_device call with the proper const values driver-core: constify data for class_find_device() firmware: Ignore abort check when no user-helper is used firmware: Reduce ifdef CONFIG_FW_LOADER_USER_HELPER firmware: Make user-mode helper optional firmware: Refactoring for splitting user-mode helper code Driver core: treat unregistered bus_types as having no devices watchdog: Convert to devm_ioremap_resource() thermal: Convert to devm_ioremap_resource() spi: Convert to devm_ioremap_resource() power: Convert to devm_ioremap_resource() mtd: Convert to devm_ioremap_resource() mmc: Convert to devm_ioremap_resource() mfd: Convert to devm_ioremap_resource() media: Convert to devm_ioremap_resource() iommu: Convert to devm_ioremap_resource() drm: Convert to devm_ioremap_resource() ...
2013-02-20Merge tag 'pm+acpi-3.9-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull ACPI and power management updates from Rafael Wysocki: - Rework of the ACPI namespace scanning code from Rafael J. Wysocki with contributions from Bjorn Helgaas, Jiang Liu, Mika Westerberg, Toshi Kani, and Yinghai Lu. - ACPI power resources handling and ACPI device PM update from Rafael J Wysocki. - ACPICA update to version 20130117 from Bob Moore and Lv Zheng with contributions from Aaron Lu, Chao Guan, Jesper Juhl, and Tim Gardner. - Support for Intel Lynxpoint LPSS from Mika Westerberg. - cpuidle update from Len Brown including Intel Haswell support, C1 state for intel_idle, removal of global pm_idle. - cpuidle fixes and cleanups from Daniel Lezcano. - cpufreq fixes and cleanups from Viresh Kumar and Fabio Baltieri with contributions from Stratos Karafotis and Rickard Andersson. - Intel P-states driver for Sandy Bridge processors from Dirk Brandewie. - cpufreq driver for Marvell Kirkwood SoCs from Andrew Lunn. - cpufreq fixes related to ordering issues between acpi-cpufreq and powernow-k8 from Borislav Petkov and Matthew Garrett. - cpufreq support for Calxeda Highbank processors from Mark Langsdorf and Rob Herring. - cpufreq driver for the Freescale i.MX6Q SoC and cpufreq-cpu0 update from Shawn Guo. - cpufreq Exynos fixes and cleanups from Jonghwan Choi, Sachin Kamat, and Inderpal Singh. - Support for "lightweight suspend" from Zhang Rui. - Removal of the deprecated power trace API from Paul Gortmaker. - Assorted updates from Andreas Fleig, Colin Ian King, Davidlohr Bueso, Joseph Salisbury, Kees Cook, Li Fei, Nishanth Menon, ShuoX Liu, Srinivas Pandruvada, Tejun Heo, Thomas Renninger, and Yasuaki Ishimatsu. * tag 'pm+acpi-3.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (267 commits) PM idle: remove global declaration of pm_idle unicore32 idle: delete stray pm_idle comment openrisc idle: delete pm_idle mn10300 idle: delete pm_idle microblaze idle: delete pm_idle m32r idle: delete pm_idle, and other dead idle code ia64 idle: delete pm_idle cris idle: delete idle and pm_idle ARM64 idle: delete pm_idle ARM idle: delete pm_idle blackfin idle: delete pm_idle sparc idle: rename pm_idle to sparc_idle sh idle: rename global pm_idle to static sh_idle x86 idle: rename global pm_idle to static x86_idle APM idle: register apm_cpu_idle via cpuidle cpufreq / intel_pstate: Add kernel command line option disable intel_pstate. cpufreq / intel_pstate: Change to disallow module build tools/power turbostat: display SMI count by default intel_idle: export both C1 and C1E ACPI / hotplug: Fix concurrency issues and memory leaks ...
2013-02-20Merge branch 'for-3.9' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup Pull cgroup changes from Tejun Heo: "Nothing too drastic. - Removal of synchronize_rcu() from userland visible paths. - Various fixes and cleanups from Li. - cgroup_rightmost_descendant() added which will be used by cpuset changes (it will be a separate pull request)." * 'for-3.9' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup: cgroup: fail if monitored file and event_control are in different cgroup cgroup: fix cgroup_rmdir() vs close(eventfd) race cpuset: fix cpuset_print_task_mems_allowed() vs rename() race cgroup: fix exit() vs rmdir() race cgroup: remove bogus comments in cgroup_diput() cgroup: remove synchronize_rcu() from cgroup_diput() cgroup: remove duplicate RCU free on struct cgroup sched: remove redundant NULL cgroup check in task_group_path() sched: split out css_online/css_offline from tg creation/destruction cgroup: initialize cgrp->dentry before css_alloc() cgroup: remove a NULL check in cgroup_exit() cgroup: fix bogus kernel warnings when cgroup_create() failed cgroup: remove synchronize_rcu() from rebind_subsystems() cgroup: remove synchronize_rcu() from cgroup_attach_{task|proc}() cgroup: use new hashtable implementation cgroups: fix cgroup_event_listener error handling cgroups: move cgroup_event_listener.c to tools/cgroup cgroup: implement cgroup_rightmost_descendant() cgroup: remove unused dummy cgroup_fork_callbacks()
2013-02-19Merge branch 'perf-core-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull perf changes from Ingo Molnar: "There are lots of improvements, the biggest changes are: Main kernel side changes: - Improve uprobes performance by adding 'pre-filtering' support, by Oleg Nesterov. - Make some POWER7 events available in sysfs, equivalent to what was done on x86, from Sukadev Bhattiprolu. - tracing updates by Steve Rostedt - mostly misc fixes and smaller improvements. - Use perf/event tracing to report PCI Express advanced errors, by Tony Luck. - Enable northbridge performance counters on AMD family 15h, by Jacob Shin. - This tracing commit: tracing: Remove the extra 4 bytes of padding in events changes the ABI. All involved parties (PowerTop in particular) seem to agree that it's safe to do now with the introduction of libtraceevent, but the devil is in the details ... Main tooling side changes: - Add 'event group view', from Namyung Kim: To use it, 'perf record' should group events when recording. And then perf report parses the saved group relation from file header and prints them together if --group option is provided. You can use the 'perf evlist' command to see event group information: $ perf record -e '{ref-cycles,cycles}' noploop 1 [ perf record: Woken up 2 times to write data ] [ perf record: Captured and wrote 0.385 MB perf.data (~16807 samples) ] $ perf evlist --group {ref-cycles,cycles} With this example, default perf report will show you each event separately. You can use --group option to enable event group view: $ perf report --group ... # group: {ref-cycles,cycles} # ======== # Samples: 7K of event 'anon group { ref-cycles, cycles }' # Event count (approx.): 6876107743 # # Overhead Command Shared Object Symbol # ................ ....... ................. .......................... 99.84% 99.76% noploop noploop [.] main 0.07% 0.00% noploop ld-2.15.so [.] strcmp 0.03% 0.00% noploop [kernel.kallsyms] [k] timerqueue_del 0.03% 0.03% noploop [kernel.kallsyms] [k] sched_clock_cpu 0.02% 0.00% noploop [kernel.kallsyms] [k] account_user_time 0.01% 0.00% noploop [kernel.kallsyms] [k] __alloc_pages_nodemask 0.00% 0.00% noploop [kernel.kallsyms] [k] native_write_msr_safe 0.00% 0.11% noploop [kernel.kallsyms] [k] _raw_spin_lock 0.00% 0.06% noploop [kernel.kallsyms] [k] find_get_page 0.00% 0.02% noploop [kernel.kallsyms] [k] rcu_check_callbacks 0.00% 0.02% noploop [kernel.kallsyms] [k] __current_kernel_time As you can see the Overhead column now contains both of ref-cycles and cycles and header line shows group information also - 'anon group { ref-cycles, cycles }'. The output is sorted by period of group leader first. - Initial GTK+ annotate browser, from Namhyung Kim. - Add option for runtime switching perf data file in perf report, just press 's' and a menu with the valid files found in the current directory will be presented, from Feng Tang. - Add support to display whole group data for raw columns, from Jiri Olsa. - Add per processor socket count aggregation in perf stat, from Stephane Eranian. - Add interval printing in 'perf stat', from Stephane Eranian. - 'perf test' improvements - Add support for wildcards in tracepoint system name, from Jiri Olsa. - Add anonymous huge page recognition, from Joshua Zhu. - perf build-id cache now can show DSOs present in a perf.data file that are not in the cache, to integrate with build-id servers being put in place by organizations such as Fedora. - perf top now shares more of the evsel config/creation routines with 'record', paving the way for further integration like 'top' snapshots, etc. - perf top now supports DWARF callchains. - Fix mmap limitations on 32-bit, fix from David Miller. - 'perf bench numa mem' NUMA performance measurement suite - ... and lots of fixes, performance improvements, cleanups and other improvements I failed to list - see the shortlog and git log for details." * 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (270 commits) perf/x86/amd: Enable northbridge performance counters on AMD family 15h perf/hwbp: Fix cleanup in case of kzalloc failure perf tools: Fix build with bison 2.3 and older. perf tools: Limit unwind support to x86 archs perf annotate: Make it to be able to skip unannotatable symbols perf gtk/annotate: Fail early if it can't annotate perf gtk/annotate: Show source lines with gray color perf gtk/annotate: Support multiple event annotation perf ui/gtk: Implement basic GTK2 annotation browser perf annotate: Fix warning message on a missing vmlinux perf buildid-cache: Add --update option uprobes/perf: Avoid uprobe_apply() whenever possible uprobes/perf: Teach trace_uprobe/perf code to use UPROBE_HANDLER_REMOVE uprobes/perf: Teach trace_uprobe/perf code to pre-filter uprobes/perf: Teach trace_uprobe/perf code to track the active perf_event's uprobes: Introduce uprobe_apply() perf: Introduce hw_perf_event->tp_target and ->tp_list uprobes/perf: Always increment trace_uprobe->nhit uprobes/tracing: Kill uprobe_trace_consumer, embed uprobe_consumer into trace_uprobe uprobes/tracing: Introduce is_trace_uprobe_enabled() ...
2013-02-18Merge branch 'release' of ↵Rafael J. Wysocki
git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux * 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux: (35 commits) PM idle: remove global declaration of pm_idle unicore32 idle: delete stray pm_idle comment openrisc idle: delete pm_idle mn10300 idle: delete pm_idle microblaze idle: delete pm_idle m32r idle: delete pm_idle, and other dead idle code ia64 idle: delete pm_idle cris idle: delete idle and pm_idle ARM64 idle: delete pm_idle ARM idle: delete pm_idle blackfin idle: delete pm_idle sparc idle: rename pm_idle to sparc_idle sh idle: rename global pm_idle to static sh_idle x86 idle: rename global pm_idle to static x86_idle APM idle: register apm_cpu_idle via cpuidle tools/power turbostat: display SMI count by default intel_idle: export both C1 and C1E cpuidle: remove vestage definition of cpuidle_state_usage.driver_data x86 idle: remove 32-bit-only "no-hlt" parameter, hlt_works_ok flag x86 idle: remove mwait_idle() and "idle=mwait" cmdline param ... Conflicts: arch/x86/kernel/process.c (with PM / tracing commit 43720bd) drivers/acpi/processor_idle.c (with ACPICA commit 4f84291)
2013-02-18ktest: Remove indexes from warnings checkSteven Rostedt (Red Hat)
The index of a line where a warning is tested can be returned differently on different versions of gcc (or same version compiled differently). That is, a tab + space can give different results. This causes the warning check to produce a false positive. Removing the index from the check fixes this issue. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2013-02-15perf, ARC: Enable building perf tools for ARCVineet Gupta
Although with uClibc there's more we need to do Signed-off-by: Vineet Gupta <vgupta@synopsys.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
2013-02-15Merge branch 'pm-tools'Rafael J. Wysocki
* pm-tools: ACPI tools / acpidump: must be run as root - install it into /usr/sbin
2013-02-14perf tools: Fix build with bison 2.3 and older.Vinson Lee
The %name-prefix "prefix" syntax is not available on bison 2.3 and older. Substitute with the -p "prefix" command-line option for compatibility with older versions of bison. This patch fixes this build error with older versions of bison. CC util/sysfs.o BISON util/pmu-bison.c util/pmu.y:2.14-24: syntax error, unexpected string, expecting = make: *** [util/pmu-bison.c] Error 1 Signed-off-by: Vinson Lee <vlee@twitter.com> Tested-by: Li Zefan <lizefan@huawei.com> Cc: stable@vger.kernel.org # 3.4+ Cc: Ingo Molnar <mingo@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Li Zefan <lizefan@huawei.com> Cc: Namhyung Kim <namhyung@gmail.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Pekka Enberg <penberg@kernel.org> Link: http://lkml.kernel.org/r/1360792138-29186-1-git-send-email-vlee@twitter.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-02-14perf tools: Limit unwind support to x86 archsJiri Olsa
There's DWARF unwind support only for x86 archs, so limit the unwind.o object to them only. Without this building for other archs (e.g. cross compiling for ARM) is broken. Signed-off-by: Jiri Olsa <jolsa@redhat.com> Signed-off-by: Dirk Behme <dirk.behme@de.bosch.com> Link: http://lkml.kernel.org/n/tip-viqtvd6hppqgt68zz4wlqm20@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-02-14perf annotate: Make it to be able to skip unannotatable symbolsNamhyung Kim
Add --skip-missing option for skipping symbols that cannot be used for annotation. It's the case of kernel symbols that user doesn't have a vmlinux image file. Signed-off-by: Namhyung Kim <namhyung@kernel.org> Cc: Andi Kleen <andi@firstfloor.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Pekka Enberg <penberg@kernel.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1360227734-375-8-git-send-email-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-02-14perf gtk/annotate: Fail early if it can't annotateNamhyung Kim
Don't need to setup a browser window if annotate cannot work. Signed-off-by: Namhyung Kim <namhyung@kernel.org> Cc: Andi Kleen <andi@firstfloor.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Pekka Enberg <penberg@kernel.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1360227734-375-7-git-send-email-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-02-14perf gtk/annotate: Show source lines with gray colorNamhyung Kim
In order to differentiate source lines from asm line, print them with gray color. To do this, it needs to be escaped since sometimes it contains "<" and/or ">" characters so that it should not be considered as a markup tags. Use glib's g_markup_escape_text() for this. Signed-off-by: Namhyung Kim <namhyung@kernel.org> Cc: Andi Kleen <andi@firstfloor.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Pekka Enberg <penberg@kernel.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1360227734-375-4-git-send-email-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-02-14perf gtk/annotate: Support multiple event annotationNamhyung Kim
Show multiple annotation result for each evsel. Each result represents the most frquently sampled symbol/function for the evsel and it will be shown in a tab window. For this add a reference to main container (notebook) to the pgctx. At the first call to annotate browser, hist_entry__find_annotations() will setup a new browser, and next calls will add new tabs to the browser. But it requires final perf_gtk__show_annotations() to start processing GUI events. Signed-off-by: Namhyung Kim <namhyung@kernel.org> Cc: Andi Kleen <andi@firstfloor.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Pekka Enberg <penberg@kernel.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1360227734-375-3-git-send-email-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-02-14perf ui/gtk: Implement basic GTK2 annotation browserNamhyung Kim
Basic implementation of perf annotate on GTK2. Currently only shows first symbol. Add a new --gtk option to use it. Signed-off-by: Namhyung Kim <namhyung@kernel.org> Cc: Andi Kleen <andi@firstfloor.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung.kim@lge.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Pekka Enberg <penberg@kernel.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1360227734-375-2-git-send-email-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-02-14perf annotate: Fix warning message on a missing vmlinuxNamhyung Kim
When perf annotate runs with no vmlinux file it cannot annotate kernel symbols because the kallsyms only provides symbol addresses. So it recommends to run perf buildid-cache to install proper vmlinux image. But running perf buildid-cache -av vmlinux as the message gives me a following error: $ perf buildid-cache -av /home/namhyung/build/kernel/vmlinux Couldn't add v: No such file or directory Since the -a option receives a parameter, 'v' should not be after the option. In addition -a option is not work for this case since the build-id cache already has a kallsyms with same build-id so it'll fail with EEXIST. Use recently added -u (--update) option for it. Signed-off-by: Namhyung Kim <namhyung@kernel.org> Cc: Andi Kleen <andi@firstfloor.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Pekka Enberg <penberg@kernel.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1360227734-375-6-git-send-email-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-02-14perf buildid-cache: Add --update optionNamhyung Kim
When adding vmlinux file to build-id cache, it'd be fail since kallsyms dso with a same build-id was already added by perf record. So one needs to remove the kallsyms first to add vmlinux into the cache. Add --update option for doing it at once. Signed-off-by: Namhyung Kim <namhyung@kernel.org> Cc: Andi Kleen <andi@firstfloor.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Pekka Enberg <penberg@kernel.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1360227734-375-5-git-send-email-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-02-13tools/power turbostat: display SMI count by defaultLen Brown
The SMI counter is popular -- so display it by default rather than requiring an option. What the heck, we've blown the 80 column budget on many systems already... Note that the value displayed is the delta during the measurement interval. The absolute value of the counter can still be seen with the generic 32-bit MSR option, ie. -m 0x34 Signed-off-by: Len Brown <len.brown@intel.com>
2013-02-08tools/power turbostat: decode MSR_IA32_POWER_CTLLen Brown
When verbose is enabled, print the C1E-Enable bit in MSR_IA32_POWER_CTL. also delete some redundant tests on the verbose variable. Signed-off-by: Len Brown <len.brown@intel.com>
2013-02-08tools/power turbostat: support HaswellLen Brown
This patch enables turbostat to run properly on the next-generation Intel(R) Microarchitecture, code named "Haswell" (HSW). HSW supports the BCLK and counters found in SNB. Signed-off-by: Len Brown <len.brown@intel.com>
2013-02-08testusb: remove all mentions of 'usbfs'Sergei Shtylyov
Commit 8a424bf40d772fedacc91862ecc86f10541fabb3 (tools/usb: remove last USBFS user) removed 'usbfs' files from the source but retained mentions of 'usbfs' all over the place, most importantly in the misleading error messages printed in case USB device files are not there. Remove all the mentions of 'usbfs' for good now! Signed-off-by: Sergei Shtylyov <sshtylyov@dev.rtsoft.ru> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-02-06perf python: Link with sysfs.oArnaldo Carvalho de Melo
So that we fix this regression: [root@sandy linux]# perf test -v 15 15: Try 'use perf' in python, checking link problems : --- start --- Traceback (most recent call last): File "<stdin>", line 1, in <module> ImportError: /home/acme/git/build/perf/python/perf.so: undefined symbol: sysfs_find_mountpoint ---- end ---- Try 'use perf' in python, checking link problems: FAILED! [root@sandy linux]# Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Namhyung Kim <namhyung@gmail.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/n/tip-8pf64bsdywg1gl9m55ul77hg@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-02-06perf evlist: Pass the event_group info via perf_attr_detailsArnaldo Carvalho de Melo
So that we avoid dragging symbol.o into the python binding. Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Namhyung Kim <namhyung@gmail.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/n/tip-izjubje7ltd1srji5wb0ygwi@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-02-06perf tools: Fix calloc argument orderingPaul Gortmaker
A sweep of the kernel for regex "kcalloc(sizeof" turned up 2 reversed args, fixed in commit d3d09e18203dba16a9dbdb2b4cc673d90748cdd1 ("EDAC: Fix kcalloc argument order") and also fixed in the networking commit a1b1add07fa794974573d93483d68e373edfe7bd ("gro: Fix kcalloc argument order"). I know that was the regex used, because on seeing the 1st of these changes, I wondered "how many other instances of this are there" and I happened to just use "calloc(sizeof" as a regex and it in turn found these additional reversed args instances in the perf code. In the kcalloc cases, the changes are cosmetic, since the numbers are simply multiplied. I had no desire to go data mining in userspace to see if the same thing held true there, however. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Joe Perches <joe@perches.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1359594349-25912-1-git-send-email-paul.gortmaker@windriver.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-02-06perf tests: Adding automated parsing tests for group :GH modifiersJiri Olsa
The ':GH' group modifier handling was just recently fixed, adding some autommated tests to keep it that way. Adding tests for following events: "{cycles,cache-misses:G}:H" "{cycles,cache-misses:H}:G" "{cycles:G,cache-misses:H}:u" "{cycles:G,cache-misses:H}:uG" Plus fixing test__group2 test. Signed-off-by: Jiri Olsa <jolsa@redhat.com> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1359971803-2343-3-git-send-email-jolsa@redhat.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-02-06perf tools: Fix perf_evsel::exclude_GH handlingJiri Olsa
Let the perf_evsel::exclude_GH only prevent the reset of exclude_host and exclude_guest attributes in case they were already set. We cannot reset their values to 0, because they might have other defaults set by event_attr_init. Signed-off-by: Jiri Olsa <jolsa@redhat.com> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1359971803-2343-2-git-send-email-jolsa@redhat.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-02-06perf perl scripts: Fix SIGALRM and pipe read race for rwtopJiri Olsa
Fixing rwtop script race. The issue is caused by rwtop script triggering SIGALRM and underneath pipe reading layer reporting error when interrupted. Fixing this by setting SA_RESTART for rwtop SIGALRM handler, which avoids interruption of the pipe reading layer. The discussion for this issue & fix is here: https://lkml.org/lkml/2012/9/18/123 Signed-off-by: Jiri Olsa <jolsa@redhat.com> Original-patch-by: Andrew Jones <drjones@redhat.com> Cc: Andrew Jones <drjones@redhat.com> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1360080351-3246-2-git-send-email-jolsa@redhat.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-02-06perf hists browser: Add support to display whole group data for raw columnsJiri Olsa
Currently we don't display group members' values for raw columns like 'Samples' and 'Period' when in group report mode. Uniting '__hpp__percent_fmt' and '__hpp__raw_fmt' function under new function __hpp__fmt. It's basically '__hpp__percent_fmt' code with new 'fmt_percent' bool parameter added saying whether raw number or percentage should be printed. This way raw columns print out all the group members when in group report mode, like: $ perf record -e '{cycles,cache-misses}' ls ... $ perf report --group --show-total-period --stdio ... # Overhead Period Command Shared Object Symbol # ................ ........................ ....... ................. ................................. # 23.63% 11.24% 3331335 317 ls [kernel.kallsyms] [k] __lock_acquire 12.72% 0.00% 1793100 0 ls [kernel.kallsyms] [k] native_sched_clock 9.72% 0.00% 1369920 0 ls libc-2.14.90.so [.] _nl_find_locale 0.03% 0.07% 4476 2 ls [kernel.kallsyms] [k] intel_pmu_enable_all 0.00% 11.73% 0 331 ls ld-2.14.90.so [.] _dl_cache_libcmp 0.00% 11.06% 0 312 ls [kernel.kallsyms] [k] vma_interval_tree_insert Signed-off-by: Jiri Olsa <jolsa@redhat.com> Acked-by: Namhyung Kim <namhyung@kernel.org> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1359981185-16819-2-git-send-email-jolsa@redhat.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-02-06perf stat: Add per processor socket count aggregationStephane Eranian
This patch adds per-processor socket count aggregation for system-wide mode measurements. This is a useful mode to detect imbalance between sockets. To enable this mode, use --aggr-socket in addition to -a. (system-wide). The output includes the socket number and the number of online processors on that socket. This is useful to gauge the amount of aggregation. # ./perf stat -I 1000 -a --aggr-socket -e cycles sleep 2 # time socket cpus counts events 1.000097680 S0 4 5,788,785 cycles 2.000379943 S0 4 27,361,546 cycles 2.001167808 S0 4 818,275 cycles Signed-off-by: Stephane Eranian <eranian@google.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung.kim@lge.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/1360161962-9675-3-git-send-email-eranian@google.com [ committer note: Added missing man page entry based on above comments ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-02-06perf tools: Add cpu_map processor socket level functionsStephane Eranian
This patch adds: - cpu_map__get_socket: get socked id from cpu - cpu_map__build_socket_map: build socket map - cpu_map__socket: gets acutal socket from logical socket Those functions are used by uncore and processor socket-level aggregation modes. Signed-off-by: Stephane Eranian <eranian@google.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung.kim@lge.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/1360161962-9675-2-git-send-email-eranian@google.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-02-06perf evlist: Make event_copy local to mmapsDavid Ahern
I am getting segfaults *after* the time sorting of perf samples where the event type is off the charts: (gdb) bt \#0 0x0807b1b2 in hists__inc_nr_events (hists=0x80a99c4, type=1163281902) at util/hist.c:1225 \#1 0x08070795 in perf_session_deliver_event (session=0x80a9b90, event=0xf7a6aff8, sample=0xffffc318, tool=0xffffc520, file_offset=0) at util/session.c:884 \#2 0x0806f9b9 in flush_sample_queue (s=0x80a9b90, tool=0xffffc520) at util/session.c:555 \#3 0x0806fc53 in process_finished_round (tool=0xffffc520, event=0x0, session=0x80a9b90) at util/session.c:645 This is bizarre because the event has already been processed once -- before it was added to the samples queue -- and the event was found to be sane at that time. There seem to be 2 causes: 1. perf_evlist__mmap_read updates the read location even though there are outstanding references to events sitting in the mmap buffers via the ordered samples queue. 2. There is a single evlist->event_copy for all evlist entries. event_copy is used to handle an event wrapping at the mmap buffer boundary. This patch addresses the second problem - making event_copy local to each perf_mmap. With this change my highly repeatable use case no longer fails. The first problem is much more complicated and will be the subject of a future patch. Signed-off-by: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/1360098762-61827-1-git-send-email-dsahern@gmail.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-02-06perf sort: Check return value of strdup()Namhyung Kim
When setup_sorting() is called, 'str' is passed to strtok_r() but it's not checked to have a valid pointer. As strtok_r() accepts NULL pointer on a first argument and use the third argument in that case, it can cause a trouble since our third argument, tmp, is not initialized. Signed-off-by: Namhyung Kim <namhyung@kernel.org> Acked-by: Jiri Olsa <jolsa@redhat.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/r/1360130237-9963-3-git-send-email-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-02-06perf sort: Make setup_sorting returns an error codeNamhyung Kim
Currently the setup_sorting() is called for parsing sort keys and exits if it failed to add the sort key. As it's included in libperf it'd be better returning an error code rather than exiting application inside of the library. Signed-off-by: Namhyung Kim <namhyung@kernel.org> Suggested-by: Arnaldo Carvalho de Melo <acme@ghostprotocols.net> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/r/1360130237-9963-2-git-send-email-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-02-06perf sort: Drop ip_[lr] arguments from _sort__sym_cmp()Namhyung Kim
Current _sort__sym_cmp() function is used for comparing symbols between two hist entries on symbol, symbol_from and symbol_to sort keys. Those functions pass addresses of symbols but it's meaningless since it gets over-written inside of the _sort__sym_cmp function to a start address of the symbol. So just get rid of them. This might cause a difference than prior output for branch stacks since it seems not using start address of the symbol but branch address. However AFAICS it'd be same as it gets overwritten anyway. Also remove redundant part of code in sort__sym_cmp(). Signed-off-by: Namhyung Kim <namhyung@kernel.org> Acked-by: Jiri Olsa <jolsa@redhat.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/r/1360130237-9963-1-git-send-email-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-02-06perf tools: Check for flex and bison before continuing buildingBorislav Petkov
Check whether both executables are present on the system before continuing with the build instead of failing halfway, if either are missing. Signed-off-by: Borislav Petkov <bp@suse.de> Link: http://lkml.kernel.org/r/1359979554-9160-1-git-send-email-bp@alien8.de Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-02-06perf evlist: Fix set event list leaderStephane Eranian
The __perf_evlist__set_leader() was setting the leader for all events in the list except the first. Which means it assumed the first event already had event->leader = event. Seems like this should be the role of the function to also do this. This is a requirement for an upcoming patch set. Signed-off-by: Stephane Eranian <eranian@google.com> Acked-by: Jiri Olsa <jolsa@redhat.com> Tested-by: Jiri Olsa <jolsa@redhat.com> Acked-by: Namhyung Kim <namhyung@kernel.org> Cc: Ingo Molnar <mingo@elte.hu> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung.kim@lge.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20130131125437.GA3656@quad Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-02-06perf report: Enable the runtime switching of perf data fileFeng Tang
This is for tui browser only. This patch will check the returned key of tui hists browser, if it's K_SWITH_INPUT_DATA, then recreate a session for the new selected data file. V2: Move the setup_brower() before the "repeat" jump point. Signed-off-by: Feng Tang <feng.tang@intel.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Ingo Molnar <mingo@elte.hu> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/1359873501-24541-2-git-send-email-feng.tang@intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-04-27 17:30:19 +0000