From ecfd20682ceb4b35c3c4daf9da0f602041f95a3f Mon Sep 17 00:00:00 2001 From: Roger Quadros Date: Fri, 16 May 2014 14:45:40 -0700 Subject: ARM: OMAP2+: nand: Fix NAND on OMAP2 and OMAP3 boards commit 5005e0b76781c37d0a16dd6dd17d015098e8ce92 upstream. Commit c66d039197e4 broke NAND for non-DT boot on all OMAP2 and OMAP3 boards using board_nand_init(). Following error is seen at boot [ 0.154998] (null): Unsupported NAND ECC scheme selected For OMAP2 and OMAP3 platforms, the ecc_opt parameter in platform data must be set to OMAP_ECC_HAM1_CODE_HW to work properly. Tested on omap3-beagle c4. Fixes: c66d039197e4 (mtd: nand: omap: combine different flavours of 1-bit hamming ecc schemes) Signed-off-by: Roger Quadros Signed-off-by: Tony Lindgren Signed-off-by: Greg Kroah-Hartman --- arch/arm/mach-omap2/board-flash.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/mach-omap2/board-flash.c b/arch/arm/mach-omap2/board-flash.c index 84cc1482e58..e87f2a83d6b 100644 --- a/arch/arm/mach-omap2/board-flash.c +++ b/arch/arm/mach-omap2/board-flash.c @@ -142,7 +142,7 @@ __init board_nand_init(struct mtd_partition *nand_parts, u8 nr_parts, u8 cs, board_nand_data.nr_parts = nr_parts; board_nand_data.devsize = nand_type; - board_nand_data.ecc_opt = OMAP_ECC_BCH8_CODE_HW; + board_nand_data.ecc_opt = OMAP_ECC_HAM1_CODE_HW; gpmc_nand_init(&board_nand_data, gpmc_t); } #endif /* CONFIG_MTD_NAND_OMAP2 || CONFIG_MTD_NAND_OMAP2_MODULE */ -- cgit v1.2.3