From f667190be182637bf8f85f70fa8a9e6582564a76 Mon Sep 17 00:00:00 2001 From: Mariusz Bia?o?czyk Date: Wed, 12 Sep 2012 07:59:18 -0300 Subject: [media] Add support for Prof Revolution DVB-S2 8000 PCI-E card The device is based on STV0903 demodulator, STB6100 tuner and CX23885 chipset; subsystem id: 8000:3034 This is a modified version of the official Prof Tuners Group patch: http://www.proftuners.com/sites/default/files/prof8000_0.patch [mchehab@redhat.com: trivial merge conflict fixup] Signed-off-by: Mariusz Bialonczyk Signed-off-by: Mauro Carvalho Chehab --- Documentation/video4linux/CARDLIST.cx23885 | 1 + drivers/media/pci/cx23885/Kconfig | 2 ++ drivers/media/pci/cx23885/cx23885-cards.c | 10 ++++++ drivers/media/pci/cx23885/cx23885-dvb.c | 56 ++++++++++++++++++++++++++++++ drivers/media/pci/cx23885/cx23885.h | 1 + 5 files changed, 70 insertions(+) diff --git a/Documentation/video4linux/CARDLIST.cx23885 b/Documentation/video4linux/CARDLIST.cx23885 index 652aecd1319..1299b5e82d7 100644 --- a/Documentation/video4linux/CARDLIST.cx23885 +++ b/Documentation/video4linux/CARDLIST.cx23885 @@ -35,3 +35,4 @@ 34 -> TerraTec Cinergy T PCIe Dual [153b:117e] 35 -> TeVii S471 [d471:9022] 36 -> Hauppauge WinTV-HVR1255 [0070:2259] + 37 -> Prof Revolution DVB-S2 8000 [8000:3034] diff --git a/drivers/media/pci/cx23885/Kconfig b/drivers/media/pci/cx23885/Kconfig index 9c6afe92258..4b99a262fed 100644 --- a/drivers/media/pci/cx23885/Kconfig +++ b/drivers/media/pci/cx23885/Kconfig @@ -18,6 +18,8 @@ config VIDEO_CX23885 select DVB_ZL10353 if MEDIA_SUBDRV_AUTOSELECT select DVB_TDA10048 if MEDIA_SUBDRV_AUTOSELECT select DVB_LNBP21 if MEDIA_SUBDRV_AUTOSELECT + select DVB_STV090x if MEDIA_SUBDRV_AUTOSELECT + select DVB_STB6100 if MEDIA_SUBDRV_AUTOSELECT select DVB_STV6110 if MEDIA_SUBDRV_AUTOSELECT select DVB_CX24116 if MEDIA_SUBDRV_AUTOSELECT select DVB_STV0900 if MEDIA_SUBDRV_AUTOSELECT diff --git a/drivers/media/pci/cx23885/cx23885-cards.c b/drivers/media/pci/cx23885/cx23885-cards.c index d889bd2fe9c..39a4a4b9ed7 100644 --- a/drivers/media/pci/cx23885/cx23885-cards.c +++ b/drivers/media/pci/cx23885/cx23885-cards.c @@ -565,6 +565,10 @@ struct cx23885_board cx23885_boards[] = { [CX23885_BOARD_TEVII_S471] = { .name = "TeVii S471", .portb = CX23885_MPEG_DVB, + }, + [CX23885_BOARD_PROF_8000] = { + .name = "Prof Revolution DVB-S2 8000", + .portb = CX23885_MPEG_DVB, } }; const unsigned int cx23885_bcount = ARRAY_SIZE(cx23885_boards); @@ -777,6 +781,10 @@ struct cx23885_subid cx23885_subids[] = { .subvendor = 0xd471, .subdevice = 0x9022, .card = CX23885_BOARD_TEVII_S471, + }, { + .subvendor = 0x8000, + .subdevice = 0x3034, + .card = CX23885_BOARD_PROF_8000, }, }; const unsigned int cx23885_idcount = ARRAY_SIZE(cx23885_subids); @@ -1156,6 +1164,7 @@ void cx23885_gpio_setup(struct cx23885_dev *dev) cx_set(GP0_IO, 0x00040004); break; case CX23885_BOARD_TBS_6920: + case CX23885_BOARD_PROF_8000: cx_write(MC417_CTL, 0x00000036); cx_write(MC417_OEN, 0x00001000); cx_set(MC417_RWD, 0x00000002); @@ -1540,6 +1549,7 @@ void cx23885_card_setup(struct cx23885_dev *dev) case CX23885_BOARD_TEVII_S470: case CX23885_BOARD_TEVII_S471: case CX23885_BOARD_DVBWORLD_2005: + case CX23885_BOARD_PROF_8000: ts1->gen_ctrl_val = 0x5; /* Parallel */ ts1->ts_clk_en_val = 0x1; /* Enable TS_CLK */ ts1->src_sel_val = CX23885_SRC_SEL_PARALLEL_MPEG_VIDEO; diff --git a/drivers/media/pci/cx23885/cx23885-dvb.c b/drivers/media/pci/cx23885/cx23885-dvb.c index f3202a52d53..4379d8a6dad 100644 --- a/drivers/media/pci/cx23885/cx23885-dvb.c +++ b/drivers/media/pci/cx23885/cx23885-dvb.c @@ -63,6 +63,9 @@ #include "stv0367.h" #include "drxk.h" #include "mt2063.h" +#include "stv090x.h" +#include "stb6100.h" +#include "stb6100_cfg.h" static unsigned int debug; @@ -489,6 +492,42 @@ static struct xc5000_config mygica_x8506_xc5000_config = { .if_khz = 5380, }; +static struct stv090x_config prof_8000_stv090x_config = { + .device = STV0903, + .demod_mode = STV090x_SINGLE, + .clk_mode = STV090x_CLK_EXT, + .xtal = 27000000, + .address = 0x6A, + .ts1_mode = STV090x_TSMODE_PARALLEL_PUNCTURED, + .repeater_level = STV090x_RPTLEVEL_64, + .adc1_range = STV090x_ADC_2Vpp, + .diseqc_envelope_mode = false, + + .tuner_get_frequency = stb6100_get_frequency, + .tuner_set_frequency = stb6100_set_frequency, + .tuner_set_bandwidth = stb6100_set_bandwidth, + .tuner_get_bandwidth = stb6100_get_bandwidth, +}; + +static struct stb6100_config prof_8000_stb6100_config = { + .tuner_address = 0x60, + .refclock = 27000000, +}; + +static int p8000_set_voltage(struct dvb_frontend *fe, fe_sec_voltage_t voltage) +{ + struct cx23885_tsport *port = fe->dvb->priv; + struct cx23885_dev *dev = port->dev; + + if (voltage == SEC_VOLTAGE_18) + cx_write(MC417_RWD, 0x00001e00); + else if (voltage == SEC_VOLTAGE_13) + cx_write(MC417_RWD, 0x00001a00); + else + cx_write(MC417_RWD, 0x00001800); + return 0; +} + static int cx23885_dvb_set_frontend(struct dvb_frontend *fe) { struct dtv_frontend_properties *p = &fe->dtv_property_cache; @@ -1186,6 +1225,23 @@ static int dvb_register(struct cx23885_tsport *port) &tevii_ds3000_config, &i2c_bus->i2c_adap); break; + case CX23885_BOARD_PROF_8000: + i2c_bus = &dev->i2c_bus[0]; + + fe0->dvb.frontend = dvb_attach(stv090x_attach, + &prof_8000_stv090x_config, + &i2c_bus->i2c_adap, + STV090x_DEMODULATOR_0); + if (fe0->dvb.frontend != NULL) { + if (!dvb_attach(stb6100_attach, + fe0->dvb.frontend, + &prof_8000_stb6100_config, + &i2c_bus->i2c_adap)) + goto frontend_detach; + + fe0->dvb.frontend->ops.set_voltage = p8000_set_voltage; + } + break; default: printk(KERN_INFO "%s: The frontend of your DVB/ATSC card " " isn't supported yet\n", diff --git a/drivers/media/pci/cx23885/cx23885.h b/drivers/media/pci/cx23885/cx23885.h index 5d560c747e0..67f40d31450 100644 --- a/drivers/media/pci/cx23885/cx23885.h +++ b/drivers/media/pci/cx23885/cx23885.h @@ -90,6 +90,7 @@ #define CX23885_BOARD_TERRATEC_CINERGY_T_PCIE_DUAL 34 #define CX23885_BOARD_TEVII_S471 35 #define CX23885_BOARD_HAUPPAUGE_HVR1255_22111 36 +#define CX23885_BOARD_PROF_8000 37 #define GPIO_0 0x00000001 #define GPIO_1 0x00000002 -- cgit v1.2.3