From 6b24c9cb7d57a41f2ff193bcfcc2e1976bb4bbac Mon Sep 17 00:00:00 2001 From: Rhyland Klein Date: Thu, 21 Mar 2013 16:33:04 -0400 Subject: tps65090: Update bindings for subnode This updates the DT documentation to reflect that the tps65090-charger should be represented as a child node of the tps65090 device itself. Signed-off-by: Rhyland Klein Signed-off-by: Anton Vorontsov --- .../devicetree/bindings/power_supply/tps65090.txt | 18 ++++++------------ 1 file changed, 6 insertions(+), 12 deletions(-) (limited to 'Documentation/devicetree/bindings/power_supply/tps65090.txt') diff --git a/Documentation/devicetree/bindings/power_supply/tps65090.txt b/Documentation/devicetree/bindings/power_supply/tps65090.txt index 56370c724e3..8e5e0d3910d 100644 --- a/Documentation/devicetree/bindings/power_supply/tps65090.txt +++ b/Documentation/devicetree/bindings/power_supply/tps65090.txt @@ -1,23 +1,17 @@ TPS65090 Frontend PMU with Switchmode Charger Required Properties: --compatible: "ti,tps65090" --reg: I2C slave address --interrupts: the interrupt output to which this device connects +-compatible: "ti,tps65090-charger" Optional Properties: -ti,enable-low-current-chrg: Enables charging when a low current is detected while the default logic is to stop charging. -Example: +This node is a subnode of the tps65090 PMIC. - tps65090@48 { - compatible = "ti,tps65090"; - reg = <0x48>; - interrupts = <0 88 0x4>; +Example: + tps65090-charger { + compatible = "ti,tps65090-charger"; ti,enable-low-current-chrg; - - regulators { - ... - }; + }; -- cgit v1.2.3