From 3ccb1c1702ed4bb07006d20c8173899a69dae242 Mon Sep 17 00:00:00 2001 From: Tony Prisk Date: Thu, 3 Jan 2013 08:44:16 +1300 Subject: pwm: vt8500: Add polarity support Add support to set polarity on PWM devices, allowing for inverted duty cycles. Also update the binding document to #pwm-cells = <3> to allow passing the flags from devicetree. Signed-off-by: Tony Prisk Signed-off-by: Thierry Reding --- Documentation/devicetree/bindings/pwm/vt8500-pwm.txt | 9 ++++++--- 1 file changed, 6 insertions(+), 3 deletions(-) (limited to 'Documentation/devicetree/bindings/pwm/vt8500-pwm.txt') diff --git a/Documentation/devicetree/bindings/pwm/vt8500-pwm.txt b/Documentation/devicetree/bindings/pwm/vt8500-pwm.txt index bcc63678a9a..d21d82d2985 100644 --- a/Documentation/devicetree/bindings/pwm/vt8500-pwm.txt +++ b/Documentation/devicetree/bindings/pwm/vt8500-pwm.txt @@ -3,14 +3,17 @@ VIA/Wondermedia VT8500/WM8xxx series SoC PWM controller Required properties: - compatible: should be "via,vt8500-pwm" - reg: physical base address and length of the controller's registers -- #pwm-cells: should be 2. The first cell specifies the per-chip index - of the PWM to use and the second cell is the period in nanoseconds. +- #pwm-cells: Should be 3. Number of cells being used to specify PWM property. + First cell specifies the per-chip index of the PWM to use, the second + cell is the period in nanoseconds and bit 0 in the third cell is used to + encode the polarity of PWM output. Set bit 0 of the third in PWM specifier + to 1 for inverse polarity & set to 0 for normal polarity. - clocks: phandle to the PWM source clock Example: pwm1: pwm@d8220000 { - #pwm-cells = <2>; + #pwm-cells = <3>; compatible = "via,vt8500-pwm"; reg = <0xd8220000 0x1000>; clocks = <&clkpwm>; -- cgit v1.2.3