From 3f0d1c67fa20d524fdcb4a7dcda19ed76c59be44 Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Fri, 9 Aug 2013 11:41:58 +0100 Subject: usb: misc: usb3503: Support operation with no I2C control Refactor so that register writes for configuration are only performed if the device has a regmap provided and also register as a platform driver. This allows the driver to be used to manage GPIO based control of the device. Signed-off-by: Mark Brown Cc: devicetree@vger.kernel.org Reviewed-by: Dongjin Kim Signed-off-by: Greg Kroah-Hartman --- Documentation/devicetree/bindings/usb/usb3503.txt | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'Documentation/devicetree/bindings/usb') diff --git a/Documentation/devicetree/bindings/usb/usb3503.txt b/Documentation/devicetree/bindings/usb/usb3503.txt index 44a03f33842..a018da4a7ad 100644 --- a/Documentation/devicetree/bindings/usb/usb3503.txt +++ b/Documentation/devicetree/bindings/usb/usb3503.txt @@ -2,9 +2,10 @@ SMSC USB3503 High-Speed Hub Controller Required properties: - compatible: Should be "smsc,usb3503" or "smsc,usb3503a". -- reg: Specifies the i2c slave address, it should be 0x08. Optional properties: +- reg: Specifies the i2c slave address, it is required and should be 0x08 + if I2C is used. - connect-gpios: Should specify GPIO for connect. - disabled-ports: Should specify the ports unused. '1' or '2' or '3' are availe for this property to describe the port -- cgit v1.2.3