From 006694d099e86e5a928fb39bdea280ab42c9d59c Mon Sep 17 00:00:00 2001 From: Lee Jones Date: Mon, 15 Oct 2012 14:16:59 +0100 Subject: regulator: gpio-regulator: Allow use of GPIO controlled regulators though DT Here we provide the GPIO Regulator driver with Device Tree capability, so that when a platform is booting with DT instead of platform data we can still make full use of it. Signed-off-by: Lee Jones Reviewed-by: Stephen Warren Signed-off-by: Mark Brown --- .../bindings/regulator/gpio-regulator.txt | 36 ++++++++++++++++++++++ 1 file changed, 36 insertions(+) create mode 100644 Documentation/devicetree/bindings/regulator/gpio-regulator.txt (limited to 'Documentation/devicetree') diff --git a/Documentation/devicetree/bindings/regulator/gpio-regulator.txt b/Documentation/devicetree/bindings/regulator/gpio-regulator.txt new file mode 100644 index 00000000000..3703be2ab82 --- /dev/null +++ b/Documentation/devicetree/bindings/regulator/gpio-regulator.txt @@ -0,0 +1,36 @@ +GPIO controlled regulators + +Required properties: +- compatible : Must be "regulator-gpio". + +Optional properties: +- gpio-enable : GPIO to use to enable/disable the regulator. +- gpios : GPIO group used to control voltage. +- states : Selection of available voltages and GPIO configs. +- startup-delay-us : Startup time in microseconds. +- enable-active-high : Polarity of GPIO is active high (default is low). + +Any property defined as part of the core regulator binding defined in +regulator.txt can also be used. + +Example: + + mmciv: gpio-regulator { + compatible = "regulator-gpio"; + + regulator-name = "mmci-gpio-supply"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2600000>; + regulator-boot-on; + + gpio-enable = <&gpio0 23 0x4>; + gpios = <&gpio0 24 0x4 + &gpio0 25 0x4>; + states = <1800000 0x3 + 2200000 0x2 + 2600000 0x1 + 2900000 0x0>; + + startup-delay-us = <100000>; + enable-active-high; + }; -- cgit v1.2.3 From dea05fe66edb4540a53ed6623794c4978315256a Mon Sep 17 00:00:00 2001 From: Frank Li Date: Mon, 12 Nov 2012 17:58:28 +0800 Subject: regulator: gpio-regulator: doc: Fix wrong key gpio-enable Wrong description in binding document. Doc use "gpio-enable", but code use "enable-gpio" In drivers/regulator/gpio-regulator.c config->enable_gpio = of_get_named_gpio(np, "enable-gpio", 0); Signed-off-by: Frank Li Signed-off-by: Mark Brown --- Documentation/devicetree/bindings/regulator/gpio-regulator.txt | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'Documentation/devicetree') diff --git a/Documentation/devicetree/bindings/regulator/gpio-regulator.txt b/Documentation/devicetree/bindings/regulator/gpio-regulator.txt index 3703be2ab82..f71f8083c2a 100644 --- a/Documentation/devicetree/bindings/regulator/gpio-regulator.txt +++ b/Documentation/devicetree/bindings/regulator/gpio-regulator.txt @@ -4,7 +4,7 @@ Required properties: - compatible : Must be "regulator-gpio". Optional properties: -- gpio-enable : GPIO to use to enable/disable the regulator. +- enable-gpio : GPIO to use to enable/disable the regulator. - gpios : GPIO group used to control voltage. - states : Selection of available voltages and GPIO configs. - startup-delay-us : Startup time in microseconds. @@ -23,7 +23,7 @@ Example: regulator-max-microvolt = <2600000>; regulator-boot-on; - gpio-enable = <&gpio0 23 0x4>; + enable-gpio = <&gpio0 23 0x4>; gpios = <&gpio0 24 0x4 &gpio0 25 0x4>; states = <1800000 0x3 -- cgit v1.2.3 From 216f2b9c95ac6e4f00b08df807bc4454434a9afb Mon Sep 17 00:00:00 2001 From: Lee Jones Date: Wed, 14 Nov 2012 11:51:36 +0000 Subject: regulator: gpio-regulator: Catch 'no states property' misuse A selection of voltage or current values (AKA states) should always be specified when using a GPIO regulator. If there are no switchable states then the fixed regulators should be used instead. Signed-off-by: Lee Jones Signed-off-by: Mark Brown --- Documentation/devicetree/bindings/regulator/gpio-regulator.txt | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'Documentation/devicetree') diff --git a/Documentation/devicetree/bindings/regulator/gpio-regulator.txt b/Documentation/devicetree/bindings/regulator/gpio-regulator.txt index f71f8083c2a..63c659800c0 100644 --- a/Documentation/devicetree/bindings/regulator/gpio-regulator.txt +++ b/Documentation/devicetree/bindings/regulator/gpio-regulator.txt @@ -2,11 +2,12 @@ GPIO controlled regulators Required properties: - compatible : Must be "regulator-gpio". +- states : Selection of available voltages and GPIO configs. + if there are no states, then use a fixed regulator Optional properties: - enable-gpio : GPIO to use to enable/disable the regulator. - gpios : GPIO group used to control voltage. -- states : Selection of available voltages and GPIO configs. - startup-delay-us : Startup time in microseconds. - enable-active-high : Polarity of GPIO is active high (default is low). -- cgit v1.2.3