From d9ba8f9e6298af71ec1c1fd3d88c3ef68abd0ec3 Mon Sep 17 00:00:00 2001 From: Mugunthan V N Date: Mon, 11 Feb 2013 09:52:20 +0000 Subject: driver: net: ethernet: cpsw: dual emac interface implementation The CPSW switch can act as Dual EMAC by segregating the switch ports using VLAN and port VLAN as per the TRM description in 14.3.2.10.2 Dual Mac Mode Following CPSW components will be common for both the interfaces. * Interrupt source is common for both eth interfaces * Interrupt pacing is common for both interfaces * Hardware statistics is common for all the ports * CPDMA is common for both eth interface * CPTS is common for both the interface and it should not be enabled on both the interface as timestamping information doesn't contain port information. Constrains * Reserved VID of One port should not be used in other interface which will enable switching functionality * Same VID must not be used in both the interface which will enable switching functionality Signed-off-by: Mugunthan V N Signed-off-by: David S. Miller --- Documentation/devicetree/bindings/net/cpsw.txt | 2 ++ 1 file changed, 2 insertions(+) (limited to 'Documentation') diff --git a/Documentation/devicetree/bindings/net/cpsw.txt b/Documentation/devicetree/bindings/net/cpsw.txt index 6ddd0286a9b..ecfdf756d10 100644 --- a/Documentation/devicetree/bindings/net/cpsw.txt +++ b/Documentation/devicetree/bindings/net/cpsw.txt @@ -24,6 +24,8 @@ Required properties: Optional properties: - ti,hwmods : Must be "cpgmac0" - no_bd_ram : Must be 0 or 1 +- dual_emac : Specifies Switch to act as Dual EMAC +- dual_emac_res_vlan : Specifies VID to be used to segregate the ports Note: "ti,hwmods" field is used to fetch the base address and irq resources from TI, omap hwmod data base during device registration. -- cgit v1.2.3