From d2c215aac5228350d33decd1c4c68aaf04793ca1 Mon Sep 17 00:00:00 2001 From: Hartley Sweeten Date: Fri, 26 Jul 2013 18:28:27 +0100 Subject: ARM: 7793/1: debug: use generic option for ep93xx PL10x debug port The generic option DEBUG_LL_UART_PL01X is now used to select the UART type for the kernel low-level debugging on the ep93xx platform. This enables two config options to provide the physical and virtual base address of the debug UART. Use the generic options instead of providing platform specific options to select the debug UART. UART1 is selected with: DEBUG_UART_PHYS = 0x808c0000 DEBUG_UART_VIRT = 0xfedc0000 UART2 is selected with: DEBUG_UART_PHYS = 0x808d0000 DEBUG_UART_VIRT = 0xfedd0000 UART3 is selected with: DEBUG_UART_PHYS = 0x808e0000 DEBUG_UART_VIRT = 0xfede0000 The selected UART must already be initialized by the bootloader. If it isn't setup nothing will appear (which might be desired). Signed-off-by: H Hartley Sweeten Cc: Ryan Mallon Signed-off-by: Russell King --- arch/arm/mach-ep93xx/Kconfig | 14 -------------- arch/arm/mach-ep93xx/include/mach/uncompress.h | 14 ++------------ 2 files changed, 2 insertions(+), 26 deletions(-) (limited to 'arch/arm/mach-ep93xx') diff --git a/arch/arm/mach-ep93xx/Kconfig b/arch/arm/mach-ep93xx/Kconfig index fe3c1fa5462..93e54fd4e3d 100644 --- a/arch/arm/mach-ep93xx/Kconfig +++ b/arch/arm/mach-ep93xx/Kconfig @@ -194,20 +194,6 @@ config MACH_VISION_EP9307 Say 'Y' here if you want your kernel to support the Vision Engraving Systems EP9307 SoM. -choice - prompt "Select a UART for early kernel messages" - -config EP93XX_EARLY_UART1 - bool "UART1" - -config EP93XX_EARLY_UART2 - bool "UART2" - -config EP93XX_EARLY_UART3 - bool "UART3" - -endchoice - endmenu endif diff --git a/arch/arm/mach-ep93xx/include/mach/uncompress.h b/arch/arm/mach-ep93xx/include/mach/uncompress.h index b5cc77d2380..03c42e5400d 100644 --- a/arch/arm/mach-ep93xx/include/mach/uncompress.h +++ b/arch/arm/mach-ep93xx/include/mach/uncompress.h @@ -31,18 +31,8 @@ static void __raw_writel(unsigned int value, unsigned int ptr) *((volatile unsigned int *)ptr) = value; } -#if defined(CONFIG_EP93XX_EARLY_UART1) -#define UART_BASE EP93XX_UART1_PHYS_BASE -#elif defined(CONFIG_EP93XX_EARLY_UART2) -#define UART_BASE EP93XX_UART2_PHYS_BASE -#elif defined(CONFIG_EP93XX_EARLY_UART3) -#define UART_BASE EP93XX_UART3_PHYS_BASE -#else -#define UART_BASE EP93XX_UART1_PHYS_BASE -#endif - -#define PHYS_UART_DATA (UART_BASE + 0x00) -#define PHYS_UART_FLAG (UART_BASE + 0x18) +#define PHYS_UART_DATA (CONFIG_DEBUG_UART_PHYS + 0x00) +#define PHYS_UART_FLAG (CONFIG_DEBUG_UART_PHYS + 0x18) #define UART_FLAG_TXFF 0x20 static inline void putc(int c) -- cgit v1.2.3