From 18b68e1561ff464c9b773f96e535d724c352fb8a Mon Sep 17 00:00:00 2001 From: Yoichi Yuasa Date: Wed, 22 Mar 2006 11:22:09 +0900 Subject: [MIPS] Added tb0287_defconfig back. Signed-off-by: Yoichi Yuasa Signed-off-by: Ralf Baechle --- arch/mips/configs/tb0287_defconfig | 1096 ++++++++++++++++++++++++++++++++++++ 1 file changed, 1096 insertions(+) create mode 100644 arch/mips/configs/tb0287_defconfig (limited to 'arch') diff --git a/arch/mips/configs/tb0287_defconfig b/arch/mips/configs/tb0287_defconfig new file mode 100644 index 00000000000..8a1e3ace0b2 --- /dev/null +++ b/arch/mips/configs/tb0287_defconfig @@ -0,0 +1,1096 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.16 +# Wed Mar 22 11:07:34 2006 +# +CONFIG_MIPS=y + +# +# Machine selection +# +# CONFIG_MIPS_MTX1 is not set +# CONFIG_MIPS_BOSPORUS is not set +# CONFIG_MIPS_PB1000 is not set +# CONFIG_MIPS_PB1100 is not set +# CONFIG_MIPS_PB1500 is not set +# CONFIG_MIPS_PB1550 is not set +# CONFIG_MIPS_PB1200 is not set +# CONFIG_MIPS_DB1000 is not set +# CONFIG_MIPS_DB1100 is not set +# CONFIG_MIPS_DB1500 is not set +# CONFIG_MIPS_DB1550 is not set +# CONFIG_MIPS_DB1200 is not set +# CONFIG_MIPS_MIRAGE is not set +# CONFIG_MIPS_COBALT is not set +# CONFIG_MACH_DECSTATION is not set +# CONFIG_MIPS_EV64120 is not set +# CONFIG_MIPS_EV96100 is not set +# CONFIG_MIPS_IVR is not set +# CONFIG_MIPS_ITE8172 is not set +# CONFIG_MACH_JAZZ is not set +# CONFIG_LASAT is not set +# CONFIG_MIPS_ATLAS is not set +# CONFIG_MIPS_MALTA is not set +# CONFIG_MIPS_SEAD is not set +# CONFIG_MIPS_SIM is not set +# CONFIG_MOMENCO_JAGUAR_ATX is not set +# CONFIG_MOMENCO_OCELOT is not set +# CONFIG_MOMENCO_OCELOT_3 is not set +# CONFIG_MOMENCO_OCELOT_C is not set +# CONFIG_MOMENCO_OCELOT_G is not set +# CONFIG_MIPS_XXS1500 is not set +# CONFIG_PNX8550_V2PCI is not set +# CONFIG_PNX8550_JBS is not set +# CONFIG_DDB5074 is not set +# CONFIG_DDB5476 is not set +# CONFIG_DDB5477 is not set +CONFIG_MACH_VR41XX=y +# CONFIG_PMC_YOSEMITE is not set +# CONFIG_QEMU is not set +# CONFIG_SGI_IP22 is not set +# CONFIG_SGI_IP27 is not set +# CONFIG_SGI_IP32 is not set +# CONFIG_SIBYTE_BIGSUR is not set +# CONFIG_SIBYTE_SWARM is not set +# CONFIG_SIBYTE_SENTOSA is not set +# CONFIG_SIBYTE_RHONE is not set +# CONFIG_SIBYTE_CARMEL is not set +# CONFIG_SIBYTE_PTSWARM is not set +# CONFIG_SIBYTE_LITTLESUR is not set +# CONFIG_SIBYTE_CRHINE is not set +# CONFIG_SIBYTE_CRHONE is not set +# CONFIG_SNI_RM200_PCI is not set +# CONFIG_TOSHIBA_JMR3927 is not set +# CONFIG_TOSHIBA_RBTX4927 is not set +# CONFIG_TOSHIBA_RBTX4938 is not set +# CONFIG_CASIO_E55 is not set +# CONFIG_IBM_WORKPAD is not set +# CONFIG_NEC_CMBVR4133 is not set +CONFIG_TANBAC_TB022X=y +# CONFIG_TANBAC_TB0226 is not set +CONFIG_TANBAC_TB0287=y +# CONFIG_VICTOR_MPC30X is not set +# CONFIG_ZAO_CAPCELLA is not set +CONFIG_PCI_VR41XX=y +# CONFIG_VRC4173 is not set +CONFIG_RWSEM_GENERIC_SPINLOCK=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_DMA_NONCOHERENT=y +CONFIG_DMA_NEED_PCI_MAP_STATE=y +# CONFIG_CPU_BIG_ENDIAN is not set +CONFIG_CPU_LITTLE_ENDIAN=y +CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y +CONFIG_IRQ_CPU=y +CONFIG_MIPS_L1_CACHE_SHIFT=5 + +# +# CPU selection +# +# CONFIG_CPU_MIPS32_R1 is not set +# CONFIG_CPU_MIPS32_R2 is not set +# CONFIG_CPU_MIPS64_R1 is not set +# CONFIG_CPU_MIPS64_R2 is not set +# CONFIG_CPU_R3000 is not set +# CONFIG_CPU_TX39XX is not set +CONFIG_CPU_VR41XX=y +# CONFIG_CPU_R4300 is not set +# CONFIG_CPU_R4X00 is not set +# CONFIG_CPU_TX49XX is not set +# CONFIG_CPU_R5000 is not set +# CONFIG_CPU_R5432 is not set +# CONFIG_CPU_R6000 is not set +# CONFIG_CPU_NEVADA is not set +# CONFIG_CPU_R8000 is not set +# CONFIG_CPU_R10000 is not set +# CONFIG_CPU_RM7000 is not set +# CONFIG_CPU_RM9000 is not set +# CONFIG_CPU_SB1 is not set +CONFIG_SYS_HAS_CPU_VR41XX=y +CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y +CONFIG_SYS_SUPPORTS_64BIT_KERNEL=y +CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y +CONFIG_CPU_SUPPORTS_64BIT_KERNEL=y + +# +# Kernel type +# +CONFIG_32BIT=y +# CONFIG_64BIT is not set +CONFIG_PAGE_SIZE_4KB=y +# CONFIG_PAGE_SIZE_8KB is not set +# CONFIG_PAGE_SIZE_16KB is not set +# CONFIG_PAGE_SIZE_64KB is not set +# CONFIG_MIPS_MT is not set +# CONFIG_CPU_ADVANCED is not set +CONFIG_CPU_HAS_SYNC=y +CONFIG_GENERIC_HARDIRQS=y +CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_ARCH_FLATMEM_ENABLE=y +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +# CONFIG_SPARSEMEM_STATIC is not set +CONFIG_SPLIT_PTLOCK_CPUS=4 +CONFIG_PREEMPT_NONE=y +# CONFIG_PREEMPT_VOLUNTARY is not set +# CONFIG_PREEMPT is not set + +# +# Code maturity level options +# +CONFIG_EXPERIMENTAL=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_INIT_ENV_ARG_LIMIT=32 + +# +# General setup +# +CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y +CONFIG_SWAP=y +CONFIG_SYSVIPC=y +# CONFIG_POSIX_MQUEUE is not set +# CONFIG_BSD_PROCESS_ACCT is not set +CONFIG_SYSCTL=y +# CONFIG_AUDIT is not set +# CONFIG_IKCONFIG is not set +CONFIG_INITRAMFS_SOURCE="" +# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set +CONFIG_EMBEDDED=y +CONFIG_KALLSYMS=y +# CONFIG_KALLSYMS_EXTRA_PASS is not set +# CONFIG_HOTPLUG is not set +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_EPOLL=y +CONFIG_SHMEM=y +CONFIG_CC_ALIGN_FUNCTIONS=0 +CONFIG_CC_ALIGN_LABELS=0 +CONFIG_CC_ALIGN_LOOPS=0 +CONFIG_CC_ALIGN_JUMPS=0 +CONFIG_SLAB=y +# CONFIG_TINY_SHMEM is not set +CONFIG_BASE_SMALL=0 +# CONFIG_SLOB is not set + +# +# Loadable module support +# +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +# CONFIG_MODULE_FORCE_UNLOAD is not set +CONFIG_OBSOLETE_MODPARM=y +CONFIG_MODVERSIONS=y +CONFIG_MODULE_SRCVERSION_ALL=y +CONFIG_KMOD=y + +# +# Block layer +# +# CONFIG_LBD is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +CONFIG_DEFAULT_AS=y +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="anticipatory" + +# +# Bus options (PCI, PCMCIA, EISA, ISA, TC) +# +CONFIG_HW_HAS_PCI=y +CONFIG_PCI=y +# CONFIG_PCI_LEGACY_PROC is not set +CONFIG_MMU=y + +# +# PCCARD (PCMCIA/CardBus) support +# +# CONFIG_PCCARD is not set + +# +# PCI Hotplug Support +# +# CONFIG_HOTPLUG_PCI is not set + +# +# Executable file formats +# +CONFIG_BINFMT_ELF=y +# CONFIG_BINFMT_MISC is not set +CONFIG_TRAD_SIGNALS=y + +# +# Networking +# +CONFIG_NET=y + +# +# Networking options +# +# CONFIG_NETDEBUG is not set +CONFIG_PACKET=y +# CONFIG_PACKET_MMAP is not set +CONFIG_UNIX=y +CONFIG_XFRM=y +CONFIG_XFRM_USER=m +# CONFIG_NET_KEY is not set +CONFIG_INET=y +CONFIG_IP_MULTICAST=y +CONFIG_IP_ADVANCED_ROUTER=y +CONFIG_ASK_IP_FIB_HASH=y +# CONFIG_IP_FIB_TRIE is not set +CONFIG_IP_FIB_HASH=y +CONFIG_IP_MULTIPLE_TABLES=y +CONFIG_IP_ROUTE_MULTIPATH=y +# CONFIG_IP_ROUTE_MULTIPATH_CACHED is not set +CONFIG_IP_ROUTE_VERBOSE=y +CONFIG_IP_PNP=y +# CONFIG_IP_PNP_DHCP is not set +CONFIG_IP_PNP_BOOTP=y +# CONFIG_IP_PNP_RARP is not set +CONFIG_NET_IPIP=m +CONFIG_NET_IPGRE=m +# CONFIG_NET_IPGRE_BROADCAST is not set +# CONFIG_IP_MROUTE is not set +# CONFIG_ARPD is not set +CONFIG_SYN_COOKIES=y +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +CONFIG_INET_TUNNEL=m +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y +CONFIG_TCP_CONG_ADVANCED=y + +# +# TCP congestion control +# +CONFIG_TCP_CONG_BIC=y +CONFIG_TCP_CONG_CUBIC=m +CONFIG_TCP_CONG_WESTWOOD=m +CONFIG_TCP_CONG_HTCP=m +# CONFIG_TCP_CONG_HSTCP is not set +# CONFIG_TCP_CONG_HYBLA is not set +# CONFIG_TCP_CONG_VEGAS is not set +# CONFIG_TCP_CONG_SCALABLE is not set +# CONFIG_IPV6 is not set +# CONFIG_NETFILTER is not set + +# +# DCCP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_DCCP is not set + +# +# SCTP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_SCTP is not set + +# +# TIPC Configuration (EXPERIMENTAL) +# +# CONFIG_TIPC is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_NET_DIVERT is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set + +# +# QoS and/or fair queueing +# +# CONFIG_NET_SCHED is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_IEEE80211 is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +# CONFIG_FW_LOADER is not set + +# +# Connector - unified userspace <-> kernelspace linker +# +# CONFIG_CONNECTOR is not set + +# +# Memory Technology Devices (MTD) +# +# CONFIG_MTD is not set + +# +# Parallel port support +# +# CONFIG_PARPORT is not set + +# +# Plug and Play support +# + +# +# Block devices +# +# CONFIG_BLK_CPQ_DA is not set +# CONFIG_BLK_CPQ_CISS_DA is not set +# CONFIG_BLK_DEV_DAC960 is not set +# CONFIG_BLK_DEV_UMEM is not set +# CONFIG_BLK_DEV_COW_COMMON is not set +CONFIG_BLK_DEV_LOOP=m +# CONFIG_BLK_DEV_CRYPTOLOOP is not set +CONFIG_BLK_DEV_NBD=m +# CONFIG_BLK_DEV_SX8 is not set +# CONFIG_BLK_DEV_UB is not set +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=16 +CONFIG_BLK_DEV_RAM_SIZE=4096 +# CONFIG_BLK_DEV_INITRD is not set +# CONFIG_CDROM_PKTCDVD is not set +# CONFIG_ATA_OVER_ETH is not set + +# +# ATA/ATAPI/MFM/RLL support +# +CONFIG_IDE=y +CONFIG_BLK_DEV_IDE=y + +# +# Please see Documentation/ide.txt for help/info on IDE drives +# +# CONFIG_BLK_DEV_IDE_SATA is not set +CONFIG_BLK_DEV_IDEDISK=y +# CONFIG_IDEDISK_MULTI_MODE is not set +# CONFIG_BLK_DEV_IDECD is not set +# CONFIG_BLK_DEV_IDETAPE is not set +# CONFIG_BLK_DEV_IDEFLOPPY is not set +# CONFIG_BLK_DEV_IDESCSI is not set +# CONFIG_IDE_TASK_IOCTL is not set + +# +# IDE chipset support/bugfixes +# +CONFIG_IDE_GENERIC=y +CONFIG_BLK_DEV_IDEPCI=y +# CONFIG_IDEPCI_SHARE_IRQ is not set +# CONFIG_BLK_DEV_OFFBOARD is not set +# CONFIG_BLK_DEV_GENERIC is not set +# CONFIG_BLK_DEV_OPTI621 is not set +CONFIG_BLK_DEV_IDEDMA_PCI=y +# CONFIG_BLK_DEV_IDEDMA_FORCED is not set +# CONFIG_IDEDMA_PCI_AUTO is not set +# CONFIG_BLK_DEV_AEC62XX is not set +# CONFIG_BLK_DEV_ALI15X3 is not set +# CONFIG_BLK_DEV_AMD74XX is not set +# CONFIG_BLK_DEV_CMD64X is not set +# CONFIG_BLK_DEV_TRIFLEX is not set +# CONFIG_BLK_DEV_CY82C693 is not set +# CONFIG_BLK_DEV_CS5520 is not set +# CONFIG_BLK_DEV_CS5530 is not set +# CONFIG_BLK_DEV_HPT34X is not set +# CONFIG_BLK_DEV_HPT366 is not set +# CONFIG_BLK_DEV_SC1200 is not set +# CONFIG_BLK_DEV_PIIX is not set +# CONFIG_BLK_DEV_IT821X is not set +# CONFIG_BLK_DEV_NS87415 is not set +# CONFIG_BLK_DEV_PDC202XX_OLD is not set +# CONFIG_BLK_DEV_PDC202XX_NEW is not set +# CONFIG_BLK_DEV_SVWKS is not set +CONFIG_BLK_DEV_SIIMAGE=y +# CONFIG_BLK_DEV_SLC90E66 is not set +# CONFIG_BLK_DEV_TRM290 is not set +# CONFIG_BLK_DEV_VIA82CXXX is not set +# CONFIG_IDE_ARM is not set +CONFIG_BLK_DEV_IDEDMA=y +# CONFIG_IDEDMA_IVB is not set +# CONFIG_IDEDMA_AUTO is not set +# CONFIG_BLK_DEV_HD is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +CONFIG_SCSI=y +CONFIG_SCSI_PROC_FS=y + +# +# SCSI support type (disk, tape, CD-ROM) +# +CONFIG_BLK_DEV_SD=y +# CONFIG_CHR_DEV_ST is not set +# CONFIG_CHR_DEV_OSST is not set +# CONFIG_BLK_DEV_SR is not set +# CONFIG_CHR_DEV_SG is not set +# CONFIG_CHR_DEV_SCH is not set + +# +# Some SCSI devices (e.g. CD jukebox) support multiple LUNs +# +# CONFIG_SCSI_MULTI_LUN is not set +# CONFIG_SCSI_CONSTANTS is not set +# CONFIG_SCSI_LOGGING is not set + +# +# SCSI Transport Attributes +# +# CONFIG_SCSI_SPI_ATTRS is not set +# CONFIG_SCSI_FC_ATTRS is not set +# CONFIG_SCSI_ISCSI_ATTRS is not set +# CONFIG_SCSI_SAS_ATTRS is not set + +# +# SCSI low-level drivers +# +# CONFIG_ISCSI_TCP is not set +# CONFIG_BLK_DEV_3W_XXXX_RAID is not set +# CONFIG_SCSI_3W_9XXX is not set +# CONFIG_SCSI_ACARD is not set +# CONFIG_SCSI_AACRAID is not set +# CONFIG_SCSI_AIC7XXX is not set +# CONFIG_SCSI_AIC7XXX_OLD is not set +# CONFIG_SCSI_AIC79XX is not set +# CONFIG_SCSI_DPT_I2O is not set +# CONFIG_MEGARAID_NEWGEN is not set +# CONFIG_MEGARAID_LEGACY is not set +# CONFIG_MEGARAID_SAS is not set +# CONFIG_SCSI_SATA is not set +# CONFIG_SCSI_DMX3191D is not set +# CONFIG_SCSI_FUTURE_DOMAIN is not set +# CONFIG_SCSI_IPS is not set +# CONFIG_SCSI_INITIO is not set +# CONFIG_SCSI_INIA100 is not set +# CONFIG_SCSI_SYM53C8XX_2 is not set +# CONFIG_SCSI_IPR is not set +# CONFIG_SCSI_QLOGIC_FC is not set +# CONFIG_SCSI_QLOGIC_1280 is not set +# CONFIG_SCSI_QLA_FC is not set +# CONFIG_SCSI_LPFC is not set +# CONFIG_SCSI_DC395x is not set +# CONFIG_SCSI_DC390T is not set +# CONFIG_SCSI_NSP32 is not set +# CONFIG_SCSI_DEBUG is not set + +# +# Multi-device support (RAID and LVM) +# +# CONFIG_MD is not set + +# +# Fusion MPT device support +# +# CONFIG_FUSION is not set +# CONFIG_FUSION_SPI is not set +# CONFIG_FUSION_FC is not set +# CONFIG_FUSION_SAS is not set + +# +# IEEE 1394 (FireWire) support +# +CONFIG_IEEE1394=m + +# +# Subsystem Options +# +# CONFIG_IEEE1394_VERBOSEDEBUG is not set +# CONFIG_IEEE1394_OUI_DB is not set +CONFIG_IEEE1394_EXTRA_CONFIG_ROMS=y +CONFIG_IEEE1394_CONFIG_ROM_IP1394=y +# CONFIG_IEEE1394_EXPORT_FULL_API is not set + +# +# Device Drivers +# + +# +# Texas Instruments PCILynx requires I2C +# +CONFIG_IEEE1394_OHCI1394=m + +# +# Protocol Drivers +# +CONFIG_IEEE1394_VIDEO1394=m +CONFIG_IEEE1394_SBP2=m +# CONFIG_IEEE1394_SBP2_PHYS_DMA is not set +CONFIG_IEEE1394_ETH1394=m +CONFIG_IEEE1394_DV1394=m +CONFIG_IEEE1394_RAWIO=m + +# +# I2O device support +# +# CONFIG_I2O is not set + +# +# Network device support +# +CONFIG_NETDEVICES=y +CONFIG_DUMMY=m +# CONFIG_BONDING is not set +# CONFIG_EQUALIZER is not set +# CONFIG_TUN is not set + +# +# ARCnet devices +# +# CONFIG_ARCNET is not set + +# +# PHY device support +# +# CONFIG_PHYLIB is not set + +# +# Ethernet (10 or 100Mbit) +# +CONFIG_NET_ETHERNET=y +CONFIG_MII=y +# CONFIG_HAPPYMEAL is not set +# CONFIG_SUNGEM is not set +# CONFIG_CASSINI is not set +# CONFIG_NET_VENDOR_3COM is not set +# CONFIG_DM9000 is not set + +# +# Tulip family network device support +# +# CONFIG_NET_TULIP is not set +# CONFIG_HP100 is not set +# CONFIG_NET_PCI is not set + +# +# Ethernet (1000 Mbit) +# +# CONFIG_ACENIC is not set +# CONFIG_DL2K is not set +# CONFIG_E1000 is not set +# CONFIG_NS83820 is not set +# CONFIG_HAMACHI is not set +# CONFIG_YELLOWFIN is not set +CONFIG_R8169=y +# CONFIG_R8169_NAPI is not set +# CONFIG_SIS190 is not set +# CONFIG_SKGE is not set +# CONFIG_SKY2 is not set +# CONFIG_SK98LIN is not set +# CONFIG_TIGON3 is not set +# CONFIG_BNX2 is not set + +# +# Ethernet (10000 Mbit) +# +# CONFIG_CHELSIO_T1 is not set +# CONFIG_IXGB is not set +# CONFIG_S2IO is not set + +# +# Token Ring devices +# +# CONFIG_TR is not set + +# +# Wireless LAN (non-hamradio) +# +# CONFIG_NET_RADIO is not set + +# +# Wan interfaces +# +# CONFIG_WAN is not set +# CONFIG_FDDI is not set +# CONFIG_HIPPI is not set +# CONFIG_PPP is not set +# CONFIG_SLIP is not set +# CONFIG_NET_FC is not set +# CONFIG_SHAPER is not set +# CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set + +# +# ISDN subsystem +# +# CONFIG_ISDN is not set + +# +# Telephony Support +# +# CONFIG_PHONE is not set + +# +# Input device support +# +CONFIG_INPUT=y + +# +# Userland interfaces +# +# CONFIG_INPUT_MOUSEDEV is not set +# CONFIG_INPUT_JOYDEV is not set +# CONFIG_INPUT_TSDEV is not set +# CONFIG_INPUT_EVDEV is not set +# CONFIG_INPUT_EVBUG is not set + +# +# Input Device Drivers +# +# CONFIG_INPUT_KEYBOARD is not set +# CONFIG_INPUT_MOUSE is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TOUCHSCREEN is not set +# CONFIG_INPUT_MISC is not set + +# +# Hardware I/O ports +# +# CONFIG_SERIO is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +CONFIG_VT=y +CONFIG_VT_CONSOLE=y +CONFIG_HW_CONSOLE=y +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +# CONFIG_SERIAL_8250 is not set + +# +# Non-8250 serial port support +# +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +CONFIG_SERIAL_VR41XX=y +CONFIG_SERIAL_VR41XX_CONSOLE=y +# CONFIG_SERIAL_JSM is not set +CONFIG_UNIX98_PTYS=y +CONFIG_LEGACY_PTYS=y +CONFIG_LEGACY_PTY_COUNT=256 + +# +# IPMI +# +# CONFIG_IPMI_HANDLER is not set + +# +# Watchdog Cards +# +# CONFIG_WATCHDOG is not set +# CONFIG_RTC is not set +# CONFIG_GEN_RTC is not set +# CONFIG_RTC_VR41XX is not set +# CONFIG_DTLK is not set +# CONFIG_R3964 is not set +# CONFIG_APPLICOM is not set +# CONFIG_TANBAC_TB0219 is not set + +# +# Ftape, the floppy tape device driver +# +# CONFIG_DRM is not set +CONFIG_GPIO_VR41XX=y +# CONFIG_RAW_DRIVER is not set + +# +# TPM devices +# +# CONFIG_TCG_TPM is not set +# CONFIG_TELCLOCK is not set + +# +# I2C support +# +# CONFIG_I2C is not set + +# +# SPI support +# +# CONFIG_SPI is not set +# CONFIG_SPI_MASTER is not set + +# +# Dallas's 1-wire bus +# +# CONFIG_W1 is not set + +# +# Hardware Monitoring support +# +# CONFIG_HWMON is not set +# CONFIG_HWMON_VID is not set + +# +# Misc devices +# + +# +# Multimedia Capabilities Port drivers +# + +# +# Multimedia devices +# +# CONFIG_VIDEO_DEV is not set + +# +# Digital Video Broadcasting Devices +# +# CONFIG_DVB is not set + +# +# Graphics support +# +# CONFIG_FB is not set + +# +# Console display driver support +# +# CONFIG_VGA_CONSOLE is not set +CONFIG_DUMMY_CONSOLE=y + +# +# Sound +# +# CONFIG_SOUND is not set + +# +# USB support +# +CONFIG_USB_ARCH_HAS_HCD=y +CONFIG_USB_ARCH_HAS_OHCI=y +CONFIG_USB=m +# CONFIG_USB_DEBUG is not set + +# +# Miscellaneous USB options +# +# CONFIG_USB_DEVICEFS is not set +# CONFIG_USB_BANDWIDTH is not set +# CONFIG_USB_DYNAMIC_MINORS is not set +# CONFIG_USB_OTG is not set + +# +# USB Host Controller Drivers +# +CONFIG_USB_EHCI_HCD=m +# CONFIG_USB_EHCI_SPLIT_ISO is not set +# CONFIG_USB_EHCI_ROOT_HUB_TT is not set +# CONFIG_USB_ISP116X_HCD is not set +CONFIG_USB_OHCI_HCD=m +# CONFIG_USB_OHCI_BIG_ENDIAN is not set +CONFIG_USB_OHCI_LITTLE_ENDIAN=y +# CONFIG_USB_UHCI_HCD is not set +# CONFIG_USB_SL811_HCD is not set + +# +# USB Device Class drivers +# +# CONFIG_USB_ACM is not set +# CONFIG_USB_PRINTER is not set + +# +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# + +# +# may also be needed; see USB_STORAGE Help for more information +# +CONFIG_USB_STORAGE=m +# CONFIG_USB_STORAGE_DEBUG is not set +# CONFIG_USB_STORAGE_DATAFAB is not set +# CONFIG_USB_STORAGE_FREECOM is not set +# CONFIG_USB_STORAGE_ISD200 is not set +# CONFIG_USB_STORAGE_DPCM is not set +# CONFIG_USB_STORAGE_USBAT is not set +# CONFIG_USB_STORAGE_SDDR09 is not set +# CONFIG_USB_STORAGE_SDDR55 is not set +# CONFIG_USB_STORAGE_JUMPSHOT is not set +# CONFIG_USB_STORAGE_ALAUDA is not set +# CONFIG_USB_LIBUSUAL is not set + +# +# USB Input Devices +# +CONFIG_USB_HID=m +CONFIG_USB_HIDINPUT=y +# CONFIG_USB_HIDINPUT_POWERBOOK is not set +# CONFIG_HID_FF is not set +# CONFIG_USB_HIDDEV is not set + +# +# USB HID Boot Protocol drivers +# +# CONFIG_USB_KBD is not set +# CONFIG_USB_MOUSE is not set +# CONFIG_USB_AIPTEK is not set +# CONFIG_USB_WACOM is not set +# CONFIG_USB_ACECAD is not set +# CONFIG_USB_KBTAB is not set +# CONFIG_USB_POWERMATE is not set +# CONFIG_USB_MTOUCH is not set +# CONFIG_USB_ITMTOUCH is not set +# CONFIG_USB_EGALAX is not set +# CONFIG_USB_YEALINK is not set +# CONFIG_USB_XPAD is not set +# CONFIG_USB_ATI_REMOTE is not set +# CONFIG_USB_ATI_REMOTE2 is not set +# CONFIG_USB_KEYSPAN_REMOTE is not set +# CONFIG_USB_APPLETOUCH is not set + +# +# USB Imaging devices +# +# CONFIG_USB_MDC800 is not set +# CONFIG_USB_MICROTEK is not set + +# +# USB Multimedia devices +# +# CONFIG_USB_DABUSB is not set + +# +# Video4Linux support is needed for USB Multimedia device support +# + +# +# USB Network Adapters +# +# CONFIG_USB_CATC is not set +# CONFIG_USB_KAWETH is not set +# CONFIG_USB_PEGASUS is not set +# CONFIG_USB_RTL8150 is not set +# CONFIG_USB_USBNET is not set +CONFIG_USB_MON=y + +# +# USB port drivers +# + +# +# USB Serial Converter support +# +# CONFIG_USB_SERIAL is not set + +# +# USB Miscellaneous drivers +# +# CONFIG_USB_EMI62 is not set +# CONFIG_USB_EMI26 is not set +# CONFIG_USB_AUERSWALD is not set +# CONFIG_USB_RIO500 is not set +# CONFIG_USB_LEGOTOWER is not set +# CONFIG_USB_LCD is not set +# CONFIG_USB_LED is not set +# CONFIG_USB_CYTHERM is not set +# CONFIG_USB_PHIDGETKIT is not set +# CONFIG_USB_PHIDGETSERVO is not set +# CONFIG_USB_IDMOUSE is not set +# CONFIG_USB_SISUSBVGA is not set +# CONFIG_USB_LD is not set + +# +# USB DSL modem support +# + +# +# USB Gadget Support +# +# CONFIG_USB_GADGET is not set + +# +# MMC/SD Card support +# +# CONFIG_MMC is not set + +# +# InfiniBand support +# +# CONFIG_INFINIBAND is not set + +# +# EDAC - error detection and reporting (RAS) (EXPERIMENTAL) +# + +# +# File systems +# +CONFIG_EXT2_FS=y +# CONFIG_EXT2_FS_XATTR is not set +# CONFIG_EXT2_FS_XIP is not set +CONFIG_EXT3_FS=y +CONFIG_EXT3_FS_XATTR=y +# CONFIG_EXT3_FS_POSIX_ACL is not set +# CONFIG_EXT3_FS_SECURITY is not set +CONFIG_JBD=y +# CONFIG_JBD_DEBUG is not set +CONFIG_FS_MBCACHE=y +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +# CONFIG_FS_POSIX_ACL is not set +CONFIG_XFS_FS=y +CONFIG_XFS_QUOTA=y +# CONFIG_XFS_SECURITY is not set +CONFIG_XFS_POSIX_ACL=y +# CONFIG_XFS_RT is not set +# CONFIG_OCFS2_FS is not set +# CONFIG_MINIX_FS is not set +CONFIG_ROMFS_FS=m +CONFIG_INOTIFY=y +# CONFIG_QUOTA is not set +CONFIG_QUOTACTL=y +# CONFIG_DNOTIFY is not set +# CONFIG_AUTOFS_FS is not set +CONFIG_AUTOFS4_FS=y +# CONFIG_FUSE_FS is not set + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +# CONFIG_MSDOS_FS is not set +# CONFIG_VFAT_FS is not set +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_KCORE=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +# CONFIG_HUGETLB_PAGE is not set +CONFIG_RAMFS=y +# CONFIG_RELAYFS_FS is not set +# CONFIG_CONFIGFS_FS is not set + +# +# Miscellaneous filesystems +# +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +CONFIG_CRAMFS=m +# CONFIG_VXFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set + +# +# Network File Systems +# +CONFIG_NFS_FS=y +CONFIG_NFS_V3=y +# CONFIG_NFS_V3_ACL is not set +# CONFIG_NFS_V4 is not set +# CONFIG_NFS_DIRECTIO is not set +# CONFIG_NFSD is not set +CONFIG_ROOT_NFS=y +CONFIG_LOCKD=y +CONFIG_LOCKD_V4=y +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=y +# CONFIG_RPCSEC_GSS_KRB5 is not set +# CONFIG_RPCSEC_GSS_SPKM3 is not set +# CONFIG_SMB_FS is not set +# CONFIG_CIFS is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set +# CONFIG_9P_FS is not set + +# +# Partition Types +# +# CONFIG_PARTITION_ADVANCED is not set +CONFIG_MSDOS_PARTITION=y + +# +# Native Language Support +# +# CONFIG_NLS is not set + +# +# Profiling support +# +# CONFIG_PROFILING is not set + +# +# Kernel hacking +# +# CONFIG_PRINTK_TIME is not set +# CONFIG_MAGIC_SYSRQ is not set +# CONFIG_DEBUG_KERNEL is not set +CONFIG_LOG_BUF_SHIFT=14 +CONFIG_CROSSCOMPILE=y +CONFIG_CMDLINE="mem=64M console=ttyVR0,115200 ip=any root=/dev/nfs" + +# +# Security options +# +CONFIG_KEYS=y +CONFIG_KEYS_DEBUG_PROC_KEYS=y +# CONFIG_SECURITY is not set + +# +# Cryptographic options +# +# CONFIG_CRYPTO is not set + +# +# Hardware crypto devices +# + +# +# Library routines +# +# CONFIG_CRC_CCITT is not set +# CONFIG_CRC16 is not set +CONFIG_CRC32=y +# CONFIG_LIBCRC32C is not set +CONFIG_ZLIB_INFLATE=m -- cgit v1.2.3 From 6fd11a2173709cd598345e15382af480979cf4fc Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Fri, 24 Mar 2006 13:21:50 +0000 Subject: [MIPS] Cleanup free_initmem the same way as i386 did. Signed-off-by: Ralf Baechle --- arch/mips/mm/init.c | 48 +++++++++++++++++++++++------------------------- 1 file changed, 23 insertions(+), 25 deletions(-) (limited to 'arch') diff --git a/arch/mips/mm/init.c b/arch/mips/mm/init.c index ad89c442f29..c22308b93ff 100644 --- a/arch/mips/mm/init.c +++ b/arch/mips/mm/init.c @@ -276,6 +276,20 @@ void __init mem_init(void) } #endif /* !CONFIG_NEED_MULTIPLE_NODES */ +void free_init_pages(char *what, unsigned long begin, unsigned long end) +{ + unsigned long addr; + + for (addr = begin; addr < end; addr += PAGE_SIZE) { + ClearPageReserved(virt_to_page(addr)); + init_page_count(virt_to_page(addr)); + memset((void *)addr, 0xcc, PAGE_SIZE); + free_page(addr); + totalram_pages++; + } + printk(KERN_INFO "Freeing %s: %ldk freed\n", what, (end - begin) >> 10); +} + #ifdef CONFIG_BLK_DEV_INITRD void free_initrd_mem(unsigned long start, unsigned long end) { @@ -284,16 +298,7 @@ void free_initrd_mem(unsigned long start, unsigned long end) start = (unsigned long)phys_to_virt(CPHYSADDR(start)); end = (unsigned long)phys_to_virt(CPHYSADDR(end)); #endif - if (start < end) - printk(KERN_INFO "Freeing initrd memory: %ldk freed\n", - (end - start) >> 10); - - for (; start < end; start += PAGE_SIZE) { - ClearPageReserved(virt_to_page(start)); - init_page_count(virt_to_page(start)); - free_page(start); - totalram_pages++; - } + free_init_pages("initrd memory", start, end); } #endif @@ -301,24 +306,17 @@ extern unsigned long prom_free_prom_memory(void); void free_initmem(void) { - unsigned long addr, page, freed; + unsigned long start, end, freed; freed = prom_free_prom_memory(); + if (freed) + printk(KERN_INFO "Freeing firmware memory: %ldk freed\n",freed); - addr = (unsigned long) &__init_begin; - while (addr < (unsigned long) &__init_end) { + start = (unsigned long)(&__init_begin); + end = (unsigned long)(&__init_end); #ifdef CONFIG_64BIT - page = PAGE_OFFSET | CPHYSADDR(addr); -#else - page = addr; + start = PAGE_OFFSET | CPHYSADDR(start); + end = PAGE_OFFSET | CPHYSADDR(end); #endif - ClearPageReserved(virt_to_page(page)); - init_page_count(virt_to_page(page)); - free_page(page); - totalram_pages++; - freed += PAGE_SIZE; - addr += PAGE_SIZE; - } - printk(KERN_INFO "Freeing unused kernel memory: %ldk freed\n", - freed >> 10); + free_init_pages("unused kernel memory", start, end); } -- cgit v1.2.3 From b4d05cb9cbbf206ab0dc2c1740938b87b3d3ee44 Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Wed, 29 Mar 2006 14:09:14 +0100 Subject: [MIPS] Make set_vi_srs_handler static. Signed-off-by: Ralf Baechle --- arch/mips/kernel/traps.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/mips/kernel/traps.c b/arch/mips/kernel/traps.c index bed0eb6cf55..4efe3f2eba6 100644 --- a/arch/mips/kernel/traps.c +++ b/arch/mips/kernel/traps.c @@ -1019,7 +1019,7 @@ void mips_srs_free (int set) spin_unlock_irqrestore(&sr->sr_lock, flags); } -void *set_vi_srs_handler (int n, void *addr, int srs) +static void *set_vi_srs_handler(int n, void *addr, int srs) { unsigned long handler; unsigned long old_handler = vi_handlers[n]; -- cgit v1.2.3 From e76038dcc06fc22134abdc554338d444f87791c6 Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Wed, 29 Mar 2006 14:10:09 +0100 Subject: [MIPS] Remove redundant initialization of sr_allocated. Signed-off-by: Ralf Baechle --- arch/mips/kernel/traps.c | 2 -- 1 file changed, 2 deletions(-) (limited to 'arch') diff --git a/arch/mips/kernel/traps.c b/arch/mips/kernel/traps.c index 4efe3f2eba6..0688bd7605d 100644 --- a/arch/mips/kernel/traps.c +++ b/arch/mips/kernel/traps.c @@ -976,8 +976,6 @@ void mips_srs_init(void) #ifdef CONFIG_CPU_MIPSR2_SRS shadow_registers.sr_supported = ((read_c0_srsctl() >> 26) & 0x0f) + 1; printk ("%d MIPSR2 register sets available\n", shadow_registers.sr_supported); -#else - shadow_registers.sr_supported = 1; #endif shadow_registers.sr_allocated = 1; /* Set 0 used by kernel */ spin_lock_init(&shadow_registers.sr_lock); -- cgit v1.2.3 From 7acb783ecd5273a864cfb588ed63c0df0e217a9e Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Wed, 29 Mar 2006 14:11:22 +0100 Subject: [MIPS] Fixup printk in mips_srs_init. Signed-off-by: Ralf Baechle --- arch/mips/kernel/traps.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/mips/kernel/traps.c b/arch/mips/kernel/traps.c index 0688bd7605d..7ab49c6f657 100644 --- a/arch/mips/kernel/traps.c +++ b/arch/mips/kernel/traps.c @@ -975,7 +975,8 @@ void mips_srs_init(void) { #ifdef CONFIG_CPU_MIPSR2_SRS shadow_registers.sr_supported = ((read_c0_srsctl() >> 26) & 0x0f) + 1; - printk ("%d MIPSR2 register sets available\n", shadow_registers.sr_supported); + printk(KERN_INFO "%d MIPSR2 register sets available\n", + shadow_registers.sr_supported); #endif shadow_registers.sr_allocated = 1; /* Set 0 used by kernel */ spin_lock_init(&shadow_registers.sr_lock); -- cgit v1.2.3 From ff3eab2a985f8efac239768fe7dda8fffc028ded Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Wed, 29 Mar 2006 14:12:58 +0100 Subject: [MIPS] Some formatting fixes. Signed-off-by: Ralf Baechle --- arch/mips/kernel/traps.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'arch') diff --git a/arch/mips/kernel/traps.c b/arch/mips/kernel/traps.c index 7ab49c6f657..85731908525 100644 --- a/arch/mips/kernel/traps.c +++ b/arch/mips/kernel/traps.c @@ -987,7 +987,7 @@ int mips_srs_max(void) return shadow_registers.sr_supported; } -int mips_srs_alloc (void) +int mips_srs_alloc(void) { struct shadow_registers *sr = &shadow_registers; unsigned long flags; @@ -1096,7 +1096,7 @@ static void *set_vi_srs_handler(int n, void *addr, int srs) void *set_vi_handler (int n, void *addr) { - return set_vi_srs_handler (n, addr, 0); + return set_vi_srs_handler(n, addr, 0); } #endif @@ -1277,7 +1277,7 @@ void __init trap_init(void) if (cpu_has_veic || cpu_has_vint) { int nvec = cpu_has_veic ? 64 : 8; for (i = 0; i < nvec; i++) - set_vi_handler (i, NULL); + set_vi_handler(i, NULL); } else if (cpu_has_divec) set_handler(0x200, &except_vec4, 0x8); -- cgit v1.2.3 From 91b05e6776e173da5ce7c96d67b3ad186c4fa49f Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Wed, 29 Mar 2006 18:53:00 +0100 Subject: [MIPS] Fix vectored interrupt support in TLB exception handler generator. Signed-off-by: Ralf Baechle --- arch/mips/mm/tlbex.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/mips/mm/tlbex.c b/arch/mips/mm/tlbex.c index 599b3c29718..c5eea6ae12c 100644 --- a/arch/mips/mm/tlbex.c +++ b/arch/mips/mm/tlbex.c @@ -742,7 +742,7 @@ static void __init build_r3000_tlb_refill_handler(void) } #endif - memcpy((void *)CAC_BASE, tlb_handler, 0x80); + memcpy((void *)ebase, tlb_handler, 0x80); } /* @@ -1247,7 +1247,7 @@ static void __init build_r4000_tlb_refill_handler(void) } #endif - memcpy((void *)CAC_BASE, final_handler, 0x100); + memcpy((void *)ebase, final_handler, 0x100); } /* -- cgit v1.2.3 From f115da9cd60ccd5f27941dcf9fe8038ae9486a77 Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Fri, 31 Mar 2006 09:27:20 +0100 Subject: [MIPS] Wire splice syscall. Signed-off-by: Ralf Baechle --- arch/mips/kernel/scall32-o32.S | 1 + arch/mips/kernel/scall64-64.S | 1 + arch/mips/kernel/scall64-n32.S | 1 + arch/mips/kernel/scall64-o32.S | 1 + 4 files changed, 4 insertions(+) (limited to 'arch') diff --git a/arch/mips/kernel/scall32-o32.S b/arch/mips/kernel/scall32-o32.S index 2f2dc54b2e2..c05ba056b1e 100644 --- a/arch/mips/kernel/scall32-o32.S +++ b/arch/mips/kernel/scall32-o32.S @@ -634,6 +634,7 @@ einval: li v0, -EINVAL sys sys_pselect6 6 sys sys_ppoll 5 sys sys_unshare 1 + sys sys_splice 4 .endm /* We pre-compute the number of _instruction_ bytes needed to diff --git a/arch/mips/kernel/scall64-64.S b/arch/mips/kernel/scall64-64.S index 98bf25df56f..f7c4e751f54 100644 --- a/arch/mips/kernel/scall64-64.S +++ b/arch/mips/kernel/scall64-64.S @@ -460,3 +460,4 @@ sys_call_table: PTR sys_pselect6 /* 5260 */ PTR sys_ppoll PTR sys_unshare + PTR sys_splice diff --git a/arch/mips/kernel/scall64-n32.S b/arch/mips/kernel/scall64-n32.S index 05a2c0567da..52aea55d9c5 100644 --- a/arch/mips/kernel/scall64-n32.S +++ b/arch/mips/kernel/scall64-n32.S @@ -386,3 +386,4 @@ EXPORT(sysn32_call_table) PTR sys_pselect6 PTR sys_ppoll /* 6265 */ PTR sys_unshare + PTR sys_splice diff --git a/arch/mips/kernel/scall64-o32.S b/arch/mips/kernel/scall64-o32.S index 19c4ca481b0..c7e766e4636 100644 --- a/arch/mips/kernel/scall64-o32.S +++ b/arch/mips/kernel/scall64-o32.S @@ -508,4 +508,5 @@ sys_call_table: PTR sys_pselect6 PTR sys_ppoll PTR sys_unshare + PTR sys_splice .size sys_call_table,.-sys_call_table -- cgit v1.2.3 From a8d587a71b76328447de165b12495650721b9286 Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Sat, 1 Apr 2006 07:49:21 +0100 Subject: [MIPS] Wire up sync_file_range(2). Signed-off-by: Ralf Baechle --- arch/mips/kernel/linux32.c | 10 ++++++++++ arch/mips/kernel/scall32-o32.S | 1 + arch/mips/kernel/scall64-64.S | 1 + arch/mips/kernel/scall64-n32.S | 1 + arch/mips/kernel/scall64-o32.S | 1 + 5 files changed, 14 insertions(+) (limited to 'arch') diff --git a/arch/mips/kernel/linux32.c b/arch/mips/kernel/linux32.c index 3f40c37a9ee..7c953bcc5f6 100644 --- a/arch/mips/kernel/linux32.c +++ b/arch/mips/kernel/linux32.c @@ -1182,6 +1182,16 @@ asmlinkage ssize_t sys32_readahead(int fd, u32 pad0, u64 a2, u64 a3, return sys_readahead(fd, merge_64(a2, a3), count); } +asmlinkage long sys32_sync_file_range(int fd, int __pad, + unsigned long a2, unsigned long a3, + unsigned long a4, unsigned long a5, + int flags) +{ + return sys_sync_file_range(fd, + merge_64(a2, a3), merge_64(a4, a5), + flags); +} + /* Argument list sizes for sys_socketcall */ #define AL(x) ((x) * sizeof(unsigned int)) static unsigned char socketcall_nargs[18]={AL(0),AL(3),AL(3),AL(3),AL(2),AL(3), diff --git a/arch/mips/kernel/scall32-o32.S b/arch/mips/kernel/scall32-o32.S index c05ba056b1e..4e36b87be1e 100644 --- a/arch/mips/kernel/scall32-o32.S +++ b/arch/mips/kernel/scall32-o32.S @@ -635,6 +635,7 @@ einval: li v0, -EINVAL sys sys_ppoll 5 sys sys_unshare 1 sys sys_splice 4 + sys sys_sync_file_range 7 /* 4305 */ .endm /* We pre-compute the number of _instruction_ bytes needed to diff --git a/arch/mips/kernel/scall64-64.S b/arch/mips/kernel/scall64-64.S index f7c4e751f54..9ba75088737 100644 --- a/arch/mips/kernel/scall64-64.S +++ b/arch/mips/kernel/scall64-64.S @@ -461,3 +461,4 @@ sys_call_table: PTR sys_ppoll PTR sys_unshare PTR sys_splice + PTR sys_sync_file_range diff --git a/arch/mips/kernel/scall64-n32.S b/arch/mips/kernel/scall64-n32.S index 52aea55d9c5..942aca26f9c 100644 --- a/arch/mips/kernel/scall64-n32.S +++ b/arch/mips/kernel/scall64-n32.S @@ -387,3 +387,4 @@ EXPORT(sysn32_call_table) PTR sys_ppoll /* 6265 */ PTR sys_unshare PTR sys_splice + PTR sys_sync_file_range diff --git a/arch/mips/kernel/scall64-o32.S b/arch/mips/kernel/scall64-o32.S index c7e766e4636..b53a9207f53 100644 --- a/arch/mips/kernel/scall64-o32.S +++ b/arch/mips/kernel/scall64-o32.S @@ -509,4 +509,5 @@ sys_call_table: PTR sys_ppoll PTR sys_unshare PTR sys_splice + PTR sys32_sync_file_range /* 4305 */ .size sys_call_table,.-sys_call_table -- cgit v1.2.3 From e49ed7f5917de5baa9e25cf8af332b3b35724e51 Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Sat, 1 Apr 2006 07:49:52 +0100 Subject: [MIPS] Sort out duplicate exports. Signed-off-by: Ralf Baechle --- arch/mips/kernel/mips_ksyms.c | 15 --------------- arch/mips/kernel/smp.c | 2 -- 2 files changed, 17 deletions(-) (limited to 'arch') diff --git a/arch/mips/kernel/mips_ksyms.c b/arch/mips/kernel/mips_ksyms.c index e042f9d2ba3..0a71a4c3371 100644 --- a/arch/mips/kernel/mips_ksyms.c +++ b/arch/mips/kernel/mips_ksyms.c @@ -28,21 +28,9 @@ extern long __strnlen_user_asm(const char *s); /* * String functions */ -EXPORT_SYMBOL(memchr); -EXPORT_SYMBOL(memcmp); EXPORT_SYMBOL(memset); EXPORT_SYMBOL(memcpy); EXPORT_SYMBOL(memmove); -EXPORT_SYMBOL(strcat); -EXPORT_SYMBOL(strchr); -#ifdef CONFIG_64BIT -EXPORT_SYMBOL(strncmp); -#endif -EXPORT_SYMBOL(strlen); -EXPORT_SYMBOL(strncat); -EXPORT_SYMBOL(strnlen); -EXPORT_SYMBOL(strrchr); -EXPORT_SYMBOL(strstr); EXPORT_SYMBOL(kernel_thread); @@ -61,6 +49,3 @@ EXPORT_SYMBOL(__strnlen_user_asm); EXPORT_SYMBOL(csum_partial); EXPORT_SYMBOL(invalid_pte_table); -#ifdef CONFIG_GENERIC_IRQ_PROBE -EXPORT_SYMBOL(probe_irq_mask); -#endif diff --git a/arch/mips/kernel/smp.c b/arch/mips/kernel/smp.c index 78d171bfa33..72a287aa937 100644 --- a/arch/mips/kernel/smp.c +++ b/arch/mips/kernel/smp.c @@ -446,5 +446,3 @@ subsys_initcall(topology_init); EXPORT_SYMBOL(flush_tlb_page); EXPORT_SYMBOL(flush_tlb_one); -EXPORT_SYMBOL(cpu_data); -EXPORT_SYMBOL(synchronize_irq); -- cgit v1.2.3 From c9e321e095384f25f2b7ffef456794cfa876dafc Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Sat, 1 Apr 2006 20:43:58 +0100 Subject: [MIPS] Fix breakage due to the grand makefile crapectomy. It's cc-option not cc-options. Signed-off-by: Ralf Baechle --- arch/mips/Makefile | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/mips/Makefile b/arch/mips/Makefile index 9a69e0f0ab7..5d10758356a 100644 --- a/arch/mips/Makefile +++ b/arch/mips/Makefile @@ -114,9 +114,9 @@ cflags-$(CONFIG_CPU_MIPS64_R1) += $(call cc-option,-march=mips64,-mips2 -mtune=r cflags-$(CONFIG_CPU_MIPS64_R2) += $(call cc-option,-march=mips64r2,-mips2 -mtune=r4600 ) \ -Wa,-mips64r2 -Wa,--trap cflags-$(CONFIG_CPU_R5000) += -march=r5000 -Wa,--trap -cflags-$(CONFIG_CPU_R5432) += $(call cc-options,-march=r5400,-march=r5000) \ +cflags-$(CONFIG_CPU_R5432) += $(call cc-option,-march=r5400,-march=r5000) \ -Wa,--trap -cflags-$(CONFIG_CPU_NEVADA) += $(call cc-options,-march=rm5200,-march=r5000) \ +cflags-$(CONFIG_CPU_NEVADA) += $(call cc-option,-march=rm5200,-march=r5000) \ -Wa,--trap cflags-$(CONFIG_CPU_RM7000) += $(call cc-option,-march=rm7000,-march=r5000) \ -Wa,--trap -- cgit v1.2.3 From 93373ed4d87fb02554ce020d929388ac16913664 Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Sat, 1 Apr 2006 21:17:45 +0100 Subject: [MIPS] Rewrite spurious_interrupt from assembler to C. Signed-off-by: Ralf Baechle --- arch/mips/au1000/common/int-handler.S | 3 ++- arch/mips/ddb5xxx/ddb5476/int-handler.S | 3 ++- arch/mips/ddb5xxx/ddb5476/vrc5476_irq.c | 4 +--- arch/mips/ddb5xxx/ddb5477/int-handler.S | 4 ++-- arch/mips/dec/int-handler.S | 4 +++- arch/mips/galileo-boards/ev96100/int-handler.S | 3 ++- arch/mips/gt64120/ev64120/int-handler.S | 3 ++- arch/mips/jazz/int-handler.S | 3 ++- arch/mips/kernel/entry.S | 26 -------------------------- arch/mips/kernel/irq.c | 5 +++++ arch/mips/mips-boards/generic/mipsIRQ.S | 4 +++- arch/mips/mips-boards/sim/sim_irq.S | 4 +++- arch/mips/momentum/ocelot_3/int-handler.S | 4 +++- arch/mips/momentum/ocelot_c/int-handler.S | 3 ++- arch/mips/philips/pnx8550/common/mipsIRQ.S | 3 ++- arch/mips/tx4927/common/tx4927_irq_handler.S | 3 ++- arch/mips/vr41xx/common/int-handler.S | 4 +++- 17 files changed, 39 insertions(+), 44 deletions(-) (limited to 'arch') diff --git a/arch/mips/au1000/common/int-handler.S b/arch/mips/au1000/common/int-handler.S index 1c4ca883321..65baa8a8c52 100644 --- a/arch/mips/au1000/common/int-handler.S +++ b/arch/mips/au1000/common/int-handler.S @@ -64,5 +64,6 @@ NESTED(au1000_IRQ, PT_SIZE, sp) 5: move a0, sp - j spurious_interrupt + jal spurious_interrupt + j ret_from_irq END(au1000_IRQ) diff --git a/arch/mips/ddb5xxx/ddb5476/int-handler.S b/arch/mips/ddb5xxx/ddb5476/int-handler.S index 12c292e189b..0c2bdae96bb 100644 --- a/arch/mips/ddb5xxx/ddb5476/int-handler.S +++ b/arch/mips/ddb5xxx/ddb5476/int-handler.S @@ -54,7 +54,8 @@ .set reorder /* wrong alarm or masked ... */ - // j spurious_interrupt + // jal spurious_interrupt + // j ret_from_irq move a0, sp jal vrc5476_irq_dispatch j ret_from_irq diff --git a/arch/mips/ddb5xxx/ddb5476/vrc5476_irq.c b/arch/mips/ddb5xxx/ddb5476/vrc5476_irq.c index f66fe5b5863..581eabad5f8 100644 --- a/arch/mips/ddb5xxx/ddb5476/vrc5476_irq.c +++ b/arch/mips/ddb5xxx/ddb5476/vrc5476_irq.c @@ -80,8 +80,6 @@ vrc5476_irq_init(u32 base) asmlinkage void vrc5476_irq_dispatch(struct pt_regs *regs) { - extern void spurious_interrupt(void); - u32 mask; int nile4_irq; @@ -107,5 +105,5 @@ vrc5476_irq_dispatch(struct pt_regs *regs) return; } } - spurious_interrupt(); + spurious_interrupt(regs); } diff --git a/arch/mips/ddb5xxx/ddb5477/int-handler.S b/arch/mips/ddb5xxx/ddb5477/int-handler.S index a2502a14400..9884874dbeb 100644 --- a/arch/mips/ddb5xxx/ddb5477/int-handler.S +++ b/arch/mips/ddb5xxx/ddb5477/int-handler.S @@ -44,8 +44,8 @@ .set reorder /* wrong alarm or masked ... */ - j spurious_interrupt - nop + jal spurious_interrupt + j ret_from_irq END(ddb5477_handle_int) .align 5 diff --git a/arch/mips/dec/int-handler.S b/arch/mips/dec/int-handler.S index 41fa372007b..5bafd585ac3 100644 --- a/arch/mips/dec/int-handler.S +++ b/arch/mips/dec/int-handler.S @@ -282,7 +282,9 @@ fpu: #endif spurious: - j spurious_interrupt + jal spurious_interrupt + nop + j ret_from_irq nop END(decstation_handle_int) diff --git a/arch/mips/galileo-boards/ev96100/int-handler.S b/arch/mips/galileo-boards/ev96100/int-handler.S index ff4d10a3885..0edf1fec290 100644 --- a/arch/mips/galileo-boards/ev96100/int-handler.S +++ b/arch/mips/galileo-boards/ev96100/int-handler.S @@ -29,5 +29,6 @@ NESTED(ev96100IRQ, PT_SIZE, sp) jal ev96100_cpu_irq j ret_from_irq -3: j spurious_interrupt +3: jal spurious_interrupt + j ret_from_irq END(ev96100IRQ) diff --git a/arch/mips/gt64120/ev64120/int-handler.S b/arch/mips/gt64120/ev64120/int-handler.S index 752435faf2d..9dda5b44952 100644 --- a/arch/mips/gt64120/ev64120/int-handler.S +++ b/arch/mips/gt64120/ev64120/int-handler.S @@ -39,8 +39,9 @@ nop /* wrong alarm or masked ... */ - j spurious_interrupt + jal spurious_interrupt nop + j ret_from_irq END(galileo_handle_int) diff --git a/arch/mips/jazz/int-handler.S b/arch/mips/jazz/int-handler.S index dc752c67b52..e35f5fcd3f9 100644 --- a/arch/mips/jazz/int-handler.S +++ b/arch/mips/jazz/int-handler.S @@ -263,7 +263,8 @@ loc_call: /* /* * "Jump extender" to reach spurious_interrupt */ -3: j spurious_interrupt +3: jal spurious_interrupt + j ret_from_irq /* * Vectors for interrupts generated by local devices diff --git a/arch/mips/kernel/entry.S b/arch/mips/kernel/entry.S index 83c87fe4ee4..371571f4f28 100644 --- a/arch/mips/kernel/entry.S +++ b/arch/mips/kernel/entry.S @@ -119,29 +119,3 @@ syscall_exit_work: li a1, 1 jal do_syscall_trace b resume_userspace - -/* - * Common spurious interrupt handler. - */ -LEAF(spurious_interrupt) - /* - * Someone tried to fool us by sending an interrupt but we - * couldn't find a cause for it. - */ - PTR_LA t1, irq_err_count -#ifdef CONFIG_SMP -1: ll t0, (t1) - addiu t0, 1 - sc t0, (t1) -#if R10000_LLSC_WAR - beqzl t0, 1b -#else - beqz t0, 1b -#endif -#else - lw t0, (t1) - addiu t0, 1 - sw t0, (t1) -#endif - j ret_from_irq - END(spurious_interrupt) diff --git a/arch/mips/kernel/irq.c b/arch/mips/kernel/irq.c index 3dd76b3d296..e0efc4f2f93 100644 --- a/arch/mips/kernel/irq.c +++ b/arch/mips/kernel/irq.c @@ -101,6 +101,11 @@ skip: return 0; } +asmlinkage void spurious_interrupt(struct pt_regs *regs) +{ + atomic_inc(&irq_err_count); +} + #ifdef CONFIG_KGDB extern void breakpoint(void); extern void set_debug_traps(void); diff --git a/arch/mips/mips-boards/generic/mipsIRQ.S b/arch/mips/mips-boards/generic/mipsIRQ.S index ddd5c73a297..973e10aaacd 100644 --- a/arch/mips/mips-boards/generic/mipsIRQ.S +++ b/arch/mips/mips-boards/generic/mipsIRQ.S @@ -150,6 +150,8 @@ spurious: - j spurious_interrupt + jal spurious_interrupt + nop + j ret_from_irq nop END(mipsIRQ) diff --git a/arch/mips/mips-boards/sim/sim_irq.S b/arch/mips/mips-boards/sim/sim_irq.S index da52297a221..d16cf382207 100644 --- a/arch/mips/mips-boards/sim/sim_irq.S +++ b/arch/mips/mips-boards/sim/sim_irq.S @@ -94,6 +94,8 @@ spurious: - j spurious_interrupt + jal spurious_interrupt + nop + j ret_from_irq nop END(simIRQ) diff --git a/arch/mips/momentum/ocelot_3/int-handler.S b/arch/mips/momentum/ocelot_3/int-handler.S index 4522f09ed76..b1207262984 100644 --- a/arch/mips/momentum/ocelot_3/int-handler.S +++ b/arch/mips/momentum/ocelot_3/int-handler.S @@ -78,8 +78,10 @@ .set reorder /* wrong alarm or masked ... */ - j spurious_interrupt + jal spurious_interrupt nop + j ret_from_irq + nop END(ocelot3_handle_int) .align 5 diff --git a/arch/mips/momentum/ocelot_c/int-handler.S b/arch/mips/momentum/ocelot_c/int-handler.S index 52349d9bf1b..f77834193c3 100644 --- a/arch/mips/momentum/ocelot_c/int-handler.S +++ b/arch/mips/momentum/ocelot_c/int-handler.S @@ -52,8 +52,9 @@ .set reorder /* wrong alarm or masked ... */ - j spurious_interrupt + jal spurious_interrupt nop + j ret_from_irq END(ocelot_handle_int) .align 5 diff --git a/arch/mips/philips/pnx8550/common/mipsIRQ.S b/arch/mips/philips/pnx8550/common/mipsIRQ.S index 338bffda3fa..e049a719f83 100644 --- a/arch/mips/philips/pnx8550/common/mipsIRQ.S +++ b/arch/mips/philips/pnx8550/common/mipsIRQ.S @@ -46,8 +46,9 @@ /* wrong alarm or masked ... */ - j spurious_interrupt + jal spurious_interrupt nop + j ret_from_irq END(cp0_irqdispatch) .align 5 diff --git a/arch/mips/tx4927/common/tx4927_irq_handler.S b/arch/mips/tx4927/common/tx4927_irq_handler.S index dd3ceda9d71..0b2ea02574f 100644 --- a/arch/mips/tx4927/common/tx4927_irq_handler.S +++ b/arch/mips/tx4927/common/tx4927_irq_handler.S @@ -63,8 +63,9 @@ .set reorder /* wrong alarm or masked ... */ - j spurious_interrupt + jal spurious_interrupt nop + j ret_from_irq END(tx4927_irq_handler) .align 5 diff --git a/arch/mips/vr41xx/common/int-handler.S b/arch/mips/vr41xx/common/int-handler.S index 2b6043f16d0..e8652348fef 100644 --- a/arch/mips/vr41xx/common/int-handler.S +++ b/arch/mips/vr41xx/common/int-handler.S @@ -98,8 +98,10 @@ bnez t1, handle_irq li a0, 1 - j spurious_interrupt + jal spurious_interrupt nop + j ret_from_irq + nop handle_int: jal irq_dispatch -- cgit v1.2.3 From 41d4f0e61283f6807553c129416fc20766a7043f Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Sat, 1 Apr 2006 21:25:28 +0100 Subject: [MIPS] PNX8550 build fix. Signed-off-by: Ralf Baechle --- arch/mips/philips/pnx8550/common/platform.c | 1 + 1 file changed, 1 insertion(+) (limited to 'arch') diff --git a/arch/mips/philips/pnx8550/common/platform.c b/arch/mips/philips/pnx8550/common/platform.c index a592260fd67..5436b4b9745 100644 --- a/arch/mips/philips/pnx8550/common/platform.c +++ b/arch/mips/philips/pnx8550/common/platform.c @@ -18,6 +18,7 @@ #include #include #include +#include #include #include -- cgit v1.2.3 From f13b68e8174657b0253ca7cf263521ed3ac19125 Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Sun, 2 Apr 2006 13:13:19 +0100 Subject: [MIPS] Fix CONFIG_LIMITED_DMA build. This fix a build error for the Momentum Jaguar ATX eval board. Signed-off-by: Ralf Baechle --- arch/mips/mm/highmem.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'arch') diff --git a/arch/mips/mm/highmem.c b/arch/mips/mm/highmem.c index 1f7b37b38f5..0c544375b85 100644 --- a/arch/mips/mm/highmem.c +++ b/arch/mips/mm/highmem.c @@ -83,6 +83,7 @@ void __kunmap_atomic(void *kvaddr, enum km_type type) preempt_check_resched(); } +#ifndef CONFIG_LIMITED_DMA /* * This is the same as kmap_atomic() but can map memory that doesn't * have a struct page associated with it. @@ -101,6 +102,7 @@ void *kmap_atomic_pfn(unsigned long pfn, enum km_type type) return (void*) vaddr; } +#endif /* CONFIG_LIMITED_DMA */ struct page *__kmap_atomic_to_page(void *ptr) { -- cgit v1.2.3 From 0428657d874edf228fcd5396bb0e095b806e954c Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Sun, 2 Apr 2006 13:14:42 +0100 Subject: [MIPS] ITE8172: Fix build error due to missmatching prototypes. Signed-off-by: Ralf Baechle --- arch/mips/ite-boards/generic/irq.c | 3 --- 1 file changed, 3 deletions(-) (limited to 'arch') diff --git a/arch/mips/ite-boards/generic/irq.c b/arch/mips/ite-boards/generic/irq.c index e67f9612949..8c1cdfcd428 100644 --- a/arch/mips/ite-boards/generic/irq.c +++ b/arch/mips/ite-boards/generic/irq.c @@ -62,9 +62,6 @@ #define ALLINTS_NOTIMER (IE_IRQ0 | IE_IRQ1 | IE_IRQ2 | IE_IRQ3 | IE_IRQ4) -void disable_it8172_irq(unsigned int irq_nr); -void enable_it8172_irq(unsigned int irq_nr); - extern void set_debug_traps(void); extern void mips_timer_interrupt(int irq, struct pt_regs *regs); extern asmlinkage void it8172_IRQ(void); -- cgit v1.2.3 From b56bce9a25e8c117794fe74c1b9bf790de10d554 Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Sun, 2 Apr 2006 13:16:45 +0100 Subject: [MIPS] Jaguar: Fix build errors after the recent move of Marvell headers. Some things were renamed because the PPC variant of the MV-643XX now uses the same header and the Jaguar code didn't catch up on that. Signed-off-by: Ralf Baechle --- arch/mips/momentum/jaguar_atx/setup.c | 36 +++++++++++++++++------------------ 1 file changed, 18 insertions(+), 18 deletions(-) (limited to 'arch') diff --git a/arch/mips/momentum/jaguar_atx/setup.c b/arch/mips/momentum/jaguar_atx/setup.c index 91d9637143d..1379c76845d 100644 --- a/arch/mips/momentum/jaguar_atx/setup.c +++ b/arch/mips/momentum/jaguar_atx/setup.c @@ -381,24 +381,24 @@ void __init plat_setup(void) * shut down ethernet ports, just to be sure our memory doesn't get * corrupted by random ethernet traffic. */ - MV_WRITE(MV64340_ETH_TRANSMIT_QUEUE_COMMAND_REG(0), 0xff << 8); - MV_WRITE(MV64340_ETH_TRANSMIT_QUEUE_COMMAND_REG(1), 0xff << 8); - MV_WRITE(MV64340_ETH_TRANSMIT_QUEUE_COMMAND_REG(2), 0xff << 8); - MV_WRITE(MV64340_ETH_RECEIVE_QUEUE_COMMAND_REG(0), 0xff << 8); - MV_WRITE(MV64340_ETH_RECEIVE_QUEUE_COMMAND_REG(1), 0xff << 8); - MV_WRITE(MV64340_ETH_RECEIVE_QUEUE_COMMAND_REG(2), 0xff << 8); - while (MV_READ(MV64340_ETH_RECEIVE_QUEUE_COMMAND_REG(0)) & 0xff); - while (MV_READ(MV64340_ETH_RECEIVE_QUEUE_COMMAND_REG(1)) & 0xff); - while (MV_READ(MV64340_ETH_RECEIVE_QUEUE_COMMAND_REG(2)) & 0xff); - while (MV_READ(MV64340_ETH_TRANSMIT_QUEUE_COMMAND_REG(0)) & 0xff); - while (MV_READ(MV64340_ETH_TRANSMIT_QUEUE_COMMAND_REG(1)) & 0xff); - while (MV_READ(MV64340_ETH_TRANSMIT_QUEUE_COMMAND_REG(2)) & 0xff); - MV_WRITE(MV64340_ETH_PORT_SERIAL_CONTROL_REG(0), - MV_READ(MV64340_ETH_PORT_SERIAL_CONTROL_REG(0)) & ~1); - MV_WRITE(MV64340_ETH_PORT_SERIAL_CONTROL_REG(1), - MV_READ(MV64340_ETH_PORT_SERIAL_CONTROL_REG(1)) & ~1); - MV_WRITE(MV64340_ETH_PORT_SERIAL_CONTROL_REG(2), - MV_READ(MV64340_ETH_PORT_SERIAL_CONTROL_REG(2)) & ~1); + MV_WRITE(MV643XX_ETH_TRANSMIT_QUEUE_COMMAND_REG(0), 0xff << 8); + MV_WRITE(MV643XX_ETH_TRANSMIT_QUEUE_COMMAND_REG(1), 0xff << 8); + MV_WRITE(MV643XX_ETH_TRANSMIT_QUEUE_COMMAND_REG(2), 0xff << 8); + MV_WRITE(MV643XX_ETH_RECEIVE_QUEUE_COMMAND_REG(0), 0xff << 8); + MV_WRITE(MV643XX_ETH_RECEIVE_QUEUE_COMMAND_REG(1), 0xff << 8); + MV_WRITE(MV643XX_ETH_RECEIVE_QUEUE_COMMAND_REG(2), 0xff << 8); + while (MV_READ(MV643XX_ETH_RECEIVE_QUEUE_COMMAND_REG(0)) & 0xff); + while (MV_READ(MV643XX_ETH_RECEIVE_QUEUE_COMMAND_REG(1)) & 0xff); + while (MV_READ(MV643XX_ETH_RECEIVE_QUEUE_COMMAND_REG(2)) & 0xff); + while (MV_READ(MV643XX_ETH_TRANSMIT_QUEUE_COMMAND_REG(0)) & 0xff); + while (MV_READ(MV643XX_ETH_TRANSMIT_QUEUE_COMMAND_REG(1)) & 0xff); + while (MV_READ(MV643XX_ETH_TRANSMIT_QUEUE_COMMAND_REG(2)) & 0xff); + MV_WRITE(MV643XX_ETH_PORT_SERIAL_CONTROL_REG(0), + MV_READ(MV643XX_ETH_PORT_SERIAL_CONTROL_REG(0)) & ~1); + MV_WRITE(MV643XX_ETH_PORT_SERIAL_CONTROL_REG(1), + MV_READ(MV643XX_ETH_PORT_SERIAL_CONTROL_REG(1)) & ~1); + MV_WRITE(MV643XX_ETH_PORT_SERIAL_CONTROL_REG(2), + MV_READ(MV643XX_ETH_PORT_SERIAL_CONTROL_REG(2)) & ~1); /* Turn off the Bit-Error LED */ JAGUAR_FPGA_WRITE(0x80, CLR); -- cgit v1.2.3 From ed00e87fd09f113dd9e79672b835734801f2a9ea Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Sun, 2 Apr 2006 13:47:51 +0100 Subject: [MIPS] ITE: Glue build. Signed-off-by: Ralf Baechle --- arch/mips/ite-boards/generic/time.c | 1 + 1 file changed, 1 insertion(+) (limited to 'arch') diff --git a/arch/mips/ite-boards/generic/time.c b/arch/mips/ite-boards/generic/time.c index b79817bb6cc..dee497a9180 100644 --- a/arch/mips/ite-boards/generic/time.c +++ b/arch/mips/ite-boards/generic/time.c @@ -29,6 +29,7 @@ #include #include #include +#include #include #include -- cgit v1.2.3 From c40b92e09c029ef2cb0b2287cbd222ff14ae3de8 Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Sun, 2 Apr 2006 18:43:09 +0100 Subject: [MIPS] Ocelot 3: Fix build errors after the recent move of Marvell headers. Signed-off-by: Ralf Baechle --- arch/mips/momentum/ocelot_3/setup.c | 24 ++++++++++++------------ 1 file changed, 12 insertions(+), 12 deletions(-) (limited to 'arch') diff --git a/arch/mips/momentum/ocelot_3/setup.c b/arch/mips/momentum/ocelot_3/setup.c index 370e75d0e75..c6919523430 100644 --- a/arch/mips/momentum/ocelot_3/setup.c +++ b/arch/mips/momentum/ocelot_3/setup.c @@ -329,22 +329,22 @@ void __init plat_setup(void) /* shut down ethernet ports, just to be sure our memory doesn't get * corrupted by random ethernet traffic. */ - MV_WRITE(MV64340_ETH_TRANSMIT_QUEUE_COMMAND_REG(0), 0xff << 8); - MV_WRITE(MV64340_ETH_TRANSMIT_QUEUE_COMMAND_REG(1), 0xff << 8); - MV_WRITE(MV64340_ETH_RECEIVE_QUEUE_COMMAND_REG(0), 0xff << 8); - MV_WRITE(MV64340_ETH_RECEIVE_QUEUE_COMMAND_REG(1), 0xff << 8); + MV_WRITE(MV643XX_ETH_TRANSMIT_QUEUE_COMMAND_REG(0), 0xff << 8); + MV_WRITE(MV643XX_ETH_TRANSMIT_QUEUE_COMMAND_REG(1), 0xff << 8); + MV_WRITE(MV643XX_ETH_RECEIVE_QUEUE_COMMAND_REG(0), 0xff << 8); + MV_WRITE(MV643XX_ETH_RECEIVE_QUEUE_COMMAND_REG(1), 0xff << 8); do {} - while (MV_READ(MV64340_ETH_RECEIVE_QUEUE_COMMAND_REG(0)) & 0xff); + while (MV_READ(MV643XX_ETH_RECEIVE_QUEUE_COMMAND_REG(0)) & 0xff); do {} - while (MV_READ(MV64340_ETH_RECEIVE_QUEUE_COMMAND_REG(1)) & 0xff); + while (MV_READ(MV643XX_ETH_RECEIVE_QUEUE_COMMAND_REG(1)) & 0xff); do {} - while (MV_READ(MV64340_ETH_TRANSMIT_QUEUE_COMMAND_REG(0)) & 0xff); + while (MV_READ(MV643XX_ETH_TRANSMIT_QUEUE_COMMAND_REG(0)) & 0xff); do {} - while (MV_READ(MV64340_ETH_TRANSMIT_QUEUE_COMMAND_REG(1)) & 0xff); - MV_WRITE(MV64340_ETH_PORT_SERIAL_CONTROL_REG(0), - MV_READ(MV64340_ETH_PORT_SERIAL_CONTROL_REG(0)) & ~1); - MV_WRITE(MV64340_ETH_PORT_SERIAL_CONTROL_REG(1), - MV_READ(MV64340_ETH_PORT_SERIAL_CONTROL_REG(1)) & ~1); + while (MV_READ(MV643XX_ETH_TRANSMIT_QUEUE_COMMAND_REG(1)) & 0xff); + MV_WRITE(MV643XX_ETH_PORT_SERIAL_CONTROL_REG(0), + MV_READ(MV643XX_ETH_PORT_SERIAL_CONTROL_REG(0)) & ~1); + MV_WRITE(MV643XX_ETH_PORT_SERIAL_CONTROL_REG(1), + MV_READ(MV643XX_ETH_PORT_SERIAL_CONTROL_REG(1)) & ~1); /* Turn off the Bit-Error LED */ OCELOT_FPGA_WRITE(0x80, CLR); -- cgit v1.2.3 From 2ef2e1d9731bd8b3d8565e31bacd52a7c13a0aed Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Sun, 2 Apr 2006 22:07:36 +0100 Subject: [MIPS] EV96100: Fix over two year old typo in variable name. Signed-off-by: Ralf Baechle --- arch/mips/galileo-boards/ev96100/irq.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/mips/galileo-boards/ev96100/irq.c b/arch/mips/galileo-boards/ev96100/irq.c index 97bf094da4f..fa29c3b0323 100644 --- a/arch/mips/galileo-boards/ev96100/irq.c +++ b/arch/mips/galileo-boards/ev96100/irq.c @@ -54,7 +54,7 @@ static inline unsigned int ffz8(unsigned int word) return k; } -asmlinkage void ev96100_cpu_irq(unsigned int pendin) +asmlinkage void ev96100_cpu_irq(unsigned int pending) { do_IRQ(ffz8(pending >> 8), regs); } -- cgit v1.2.3 From 67cbeb334ec2f1303dd11930b0eb0379e8e39559 Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Sun, 2 Apr 2006 22:17:09 +0100 Subject: [MIPS] EV96100: ev96100_cpu_irq needs a struct pt_regs argument. Signed-off-by: Ralf Baechle --- arch/mips/galileo-boards/ev96100/irq.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/mips/galileo-boards/ev96100/irq.c b/arch/mips/galileo-boards/ev96100/irq.c index fa29c3b0323..383801dd1b9 100644 --- a/arch/mips/galileo-boards/ev96100/irq.c +++ b/arch/mips/galileo-boards/ev96100/irq.c @@ -54,7 +54,7 @@ static inline unsigned int ffz8(unsigned int word) return k; } -asmlinkage void ev96100_cpu_irq(unsigned int pending) +asmlinkage void ev96100_cpu_irq(unsigned int pending, struct pt_regs *regs) { do_IRQ(ffz8(pending >> 8), regs); } -- cgit v1.2.3 From ba8990f2aec85b5b62643aa82a1e71c738efc487 Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Mon, 3 Apr 2006 00:21:30 +0100 Subject: [MIPS] JMR3927 build fixes for the RTC code. Signed-off-by: Ralf Baechle --- arch/mips/jmr3927/common/rtc_ds1742.c | 60 +++++++++++++++++------------------ 1 file changed, 30 insertions(+), 30 deletions(-) (limited to 'arch') diff --git a/arch/mips/jmr3927/common/rtc_ds1742.c b/arch/mips/jmr3927/common/rtc_ds1742.c index a6bd3f4d304..e6561345d12 100644 --- a/arch/mips/jmr3927/common/rtc_ds1742.c +++ b/arch/mips/jmr3927/common/rtc_ds1742.c @@ -60,15 +60,15 @@ rtc_ds1742_get_time(void) unsigned long flags; spin_lock_irqsave(&rtc_lock, flags); - CMOS_WRITE(RTC_READ, RTC_CONTROL); - second = BCD2BIN(CMOS_READ(RTC_SECONDS) & RTC_SECONDS_MASK); - minute = BCD2BIN(CMOS_READ(RTC_MINUTES)); - hour = BCD2BIN(CMOS_READ(RTC_HOURS)); - day = BCD2BIN(CMOS_READ(RTC_DATE)); - month = BCD2BIN(CMOS_READ(RTC_MONTH)); - year = BCD2BIN(CMOS_READ(RTC_YEAR)); - century = BCD2BIN(CMOS_READ(RTC_CENTURY) & RTC_CENTURY_MASK); - CMOS_WRITE(0, RTC_CONTROL); + rtc_write(RTC_READ, RTC_CONTROL); + second = BCD2BIN(rtc_read(RTC_SECONDS) & RTC_SECONDS_MASK); + minute = BCD2BIN(rtc_read(RTC_MINUTES)); + hour = BCD2BIN(rtc_read(RTC_HOURS)); + day = BCD2BIN(rtc_read(RTC_DATE)); + month = BCD2BIN(rtc_read(RTC_MONTH)); + year = BCD2BIN(rtc_read(RTC_YEAR)); + century = BCD2BIN(rtc_read(RTC_CENTURY) & RTC_CENTURY_MASK); + rtc_write(0, RTC_CONTROL); spin_unlock_irqrestore(&rtc_lock, flags); year += century * 100; @@ -87,16 +87,16 @@ rtc_ds1742_set_time(unsigned long t) unsigned long flags; spin_lock_irqsave(&rtc_lock, flags); - CMOS_WRITE(RTC_READ, RTC_CONTROL); - cmos_second = (u8)(CMOS_READ(RTC_SECONDS) & RTC_SECONDS_MASK); - cmos_minute = (u8)CMOS_READ(RTC_MINUTES); - cmos_hour = (u8)CMOS_READ(RTC_HOURS); - cmos_day = (u8)CMOS_READ(RTC_DATE); - cmos_month = (u8)CMOS_READ(RTC_MONTH); - cmos_year = (u8)CMOS_READ(RTC_YEAR); - cmos_century = CMOS_READ(RTC_CENTURY) & RTC_CENTURY_MASK; + rtc_write(RTC_READ, RTC_CONTROL); + cmos_second = (u8)(rtc_read(RTC_SECONDS) & RTC_SECONDS_MASK); + cmos_minute = (u8)rtc_read(RTC_MINUTES); + cmos_hour = (u8)rtc_read(RTC_HOURS); + cmos_day = (u8)rtc_read(RTC_DATE); + cmos_month = (u8)rtc_read(RTC_MONTH); + cmos_year = (u8)rtc_read(RTC_YEAR); + cmos_century = rtc_read(RTC_CENTURY) & RTC_CENTURY_MASK; - CMOS_WRITE(RTC_WRITE, RTC_CONTROL); + rtc_write(RTC_WRITE, RTC_CONTROL); /* convert */ to_tm(t, &tm); @@ -104,18 +104,18 @@ rtc_ds1742_set_time(unsigned long t) /* check each field one by one */ year = BIN2BCD(tm.tm_year - EPOCH); if (year != cmos_year) { - CMOS_WRITE(year,RTC_YEAR); + rtc_write(year,RTC_YEAR); } month = BIN2BCD(tm.tm_mon); if (month != (cmos_month & 0x1f)) { - CMOS_WRITE((month & 0x1f) | (cmos_month & ~0x1f),RTC_MONTH); + rtc_write((month & 0x1f) | (cmos_month & ~0x1f),RTC_MONTH); } day = BIN2BCD(tm.tm_mday); if (day != cmos_day) { - CMOS_WRITE(day, RTC_DATE); + rtc_write(day, RTC_DATE); } if (cmos_hour & 0x40) { @@ -130,20 +130,20 @@ rtc_ds1742_set_time(unsigned long t) /* 24 hour format */ hour = BIN2BCD(tm.tm_hour) & 0x3f; } - if (hour != cmos_hour) CMOS_WRITE(hour, RTC_HOURS); + if (hour != cmos_hour) rtc_write(hour, RTC_HOURS); minute = BIN2BCD(tm.tm_min); if (minute != cmos_minute) { - CMOS_WRITE(minute, RTC_MINUTES); + rtc_write(minute, RTC_MINUTES); } second = BIN2BCD(tm.tm_sec); if (second != cmos_second) { - CMOS_WRITE(second & RTC_SECONDS_MASK,RTC_SECONDS); + rtc_write(second & RTC_SECONDS_MASK,RTC_SECONDS); } /* RTC_CENTURY and RTC_CONTROL share same address... */ - CMOS_WRITE(cmos_century, RTC_CONTROL); + rtc_write(cmos_century, RTC_CONTROL); spin_unlock_irqrestore(&rtc_lock, flags); return 0; @@ -163,9 +163,9 @@ rtc_ds1742_init(unsigned long base) rtc_mips_set_time = rtc_ds1742_set_time; /* clear oscillator stop bit */ - CMOS_WRITE(RTC_READ, RTC_CONTROL); - cmos_second = (u8)(CMOS_READ(RTC_SECONDS) & RTC_SECONDS_MASK); - CMOS_WRITE(RTC_WRITE, RTC_CONTROL); - CMOS_WRITE(cmos_second, RTC_SECONDS); /* clear msb */ - CMOS_WRITE(0, RTC_CONTROL); + rtc_write(RTC_READ, RTC_CONTROL); + cmos_second = (u8)(rtc_read(RTC_SECONDS) & RTC_SECONDS_MASK); + rtc_write(RTC_WRITE, RTC_CONTROL); + rtc_write(cmos_second, RTC_SECONDS); /* clear msb */ + rtc_write(0, RTC_CONTROL); } -- cgit v1.2.3 From 9c1f1257a364467d091c5166049addaf3e7d7118 Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Mon, 3 Apr 2006 10:17:21 +0100 Subject: [MIPS] Replace redundant declarations of _end by . Signed-off-by: Ralf Baechle --- arch/mips/dec/boot/decstation.c | 3 ++- arch/mips/ite-boards/ivr/init.c | 2 +- arch/mips/ite-boards/qed-4n-s01b/init.c | 2 +- arch/mips/mips-boards/generic/memory.c | 6 ++---- arch/mips/mips-boards/sim/sim_mem.c | 4 +--- 5 files changed, 7 insertions(+), 10 deletions(-) (limited to 'arch') diff --git a/arch/mips/dec/boot/decstation.c b/arch/mips/dec/boot/decstation.c index 56fd4277555..4db8bacaf22 100644 --- a/arch/mips/dec/boot/decstation.c +++ b/arch/mips/dec/boot/decstation.c @@ -1,6 +1,7 @@ /* * arch/mips/dec/decstation.c */ +#include #define RELOC #define INITRD @@ -24,7 +25,7 @@ #define INITRD_START (*(unsigned long *) (PARAM+0x218)) #define INITRD_SIZE (*(unsigned long *) (PARAM+0x21c)) -extern int _ftext, _end; /* begin and end of kernel image */ +extern int _ftext; /* begin and end of kernel image */ extern void kernel_entry(int, char **, unsigned long, int *); void * memcpy(void * dest, const void *src, unsigned int count) diff --git a/arch/mips/ite-boards/ivr/init.c b/arch/mips/ite-boards/ivr/init.c index b774db035b3..05cf9218c43 100644 --- a/arch/mips/ite-boards/ivr/init.c +++ b/arch/mips/ite-boards/ivr/init.c @@ -34,13 +34,13 @@ #include #include #include +#include #include #include int prom_argc; char **prom_argv, **prom_envp; -extern char _end; extern void __init prom_init_cmdline(void); extern unsigned long __init prom_get_memsize(void); extern void __init it8172_init_ram_resource(unsigned long memsize); diff --git a/arch/mips/ite-boards/qed-4n-s01b/init.c b/arch/mips/ite-boards/qed-4n-s01b/init.c index e8ec8be66a8..ea2a754cafe 100644 --- a/arch/mips/ite-boards/qed-4n-s01b/init.c +++ b/arch/mips/ite-boards/qed-4n-s01b/init.c @@ -34,13 +34,13 @@ #include #include #include +#include #include #include int prom_argc; char **prom_argv, **prom_envp; -extern char _end; extern void __init prom_init_cmdline(void); extern unsigned long __init prom_get_memsize(void); extern void __init it8172_init_ram_resource(unsigned long memsize); diff --git a/arch/mips/mips-boards/generic/memory.c b/arch/mips/mips-boards/generic/memory.c index 32c9210373a..d3df1eb4b6c 100644 --- a/arch/mips/mips-boards/generic/memory.c +++ b/arch/mips/mips-boards/generic/memory.c @@ -26,6 +26,7 @@ #include #include +#include #include @@ -46,9 +47,6 @@ static char *mtypes[3] = { }; #endif -/* References to section boundaries */ -extern char _end; - struct prom_pmemblock * __init prom_getmdesc(void) { char *memsize_str; @@ -106,7 +104,7 @@ struct prom_pmemblock * __init prom_getmdesc(void) mdesc[3].type = yamon_dontuse; mdesc[3].base = 0x00100000; - mdesc[3].size = CPHYSADDR(PAGE_ALIGN(&_end)) - mdesc[3].base; + mdesc[3].size = CPHYSADDR(PAGE_ALIGN((unsigned long)&_end)) - mdesc[3].base; mdesc[4].type = yamon_free; mdesc[4].base = CPHYSADDR(PAGE_ALIGN(&_end)); diff --git a/arch/mips/mips-boards/sim/sim_mem.c b/arch/mips/mips-boards/sim/sim_mem.c index e57f737bab1..ede9c27e450 100644 --- a/arch/mips/mips-boards/sim/sim_mem.c +++ b/arch/mips/mips-boards/sim/sim_mem.c @@ -21,6 +21,7 @@ #include #include +#include #include @@ -39,9 +40,6 @@ static char *mtypes[3] = { }; #endif -/* References to section boundaries */ -extern char _end; - struct prom_pmemblock * __init prom_getmdesc(void) { unsigned int memsize; -- cgit v1.2.3 From fde3505c695e0de8ae7504b58d373db2d0ba498a Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Mon, 3 Apr 2006 14:44:50 +0100 Subject: [MIPS] Fixup damage done by 22a9835c350782a5c3257343713932af3ac92ee0. Signed-off-by: Ralf Baechle --- arch/mips/mips-boards/generic/memory.c | 5 +++-- arch/mips/mips-boards/sim/sim_mem.c | 5 +++-- 2 files changed, 6 insertions(+), 4 deletions(-) (limited to 'arch') diff --git a/arch/mips/mips-boards/generic/memory.c b/arch/mips/mips-boards/generic/memory.c index d3df1eb4b6c..bc4d093685b 100644 --- a/arch/mips/mips-boards/generic/memory.c +++ b/arch/mips/mips-boards/generic/memory.c @@ -22,6 +22,7 @@ #include #include #include +#include #include #include @@ -104,10 +105,10 @@ struct prom_pmemblock * __init prom_getmdesc(void) mdesc[3].type = yamon_dontuse; mdesc[3].base = 0x00100000; - mdesc[3].size = CPHYSADDR(PAGE_ALIGN((unsigned long)&_end)) - mdesc[3].base; + mdesc[3].size = CPHYSADDR(PFN_ALIGN((unsigned long)&_end)) - mdesc[3].base; mdesc[4].type = yamon_free; - mdesc[4].base = CPHYSADDR(PAGE_ALIGN(&_end)); + mdesc[4].base = CPHYSADDR(PFN_ALIGN(&_end)); mdesc[4].size = memsize - mdesc[4].base; return &mdesc[0]; diff --git a/arch/mips/mips-boards/sim/sim_mem.c b/arch/mips/mips-boards/sim/sim_mem.c index ede9c27e450..f7ce7698332 100644 --- a/arch/mips/mips-boards/sim/sim_mem.c +++ b/arch/mips/mips-boards/sim/sim_mem.c @@ -18,6 +18,7 @@ #include #include #include +#include #include #include @@ -59,10 +60,10 @@ struct prom_pmemblock * __init prom_getmdesc(void) mdesc[2].type = simmem_reserved; mdesc[2].base = 0x00100000; - mdesc[2].size = CPHYSADDR(PAGE_ALIGN(&_end)) - mdesc[2].base; + mdesc[2].size = CPHYSADDR(PFN_ALIGN(&_end)) - mdesc[2].base; mdesc[3].type = simmem_free; - mdesc[3].base = CPHYSADDR(PAGE_ALIGN(&_end)); + mdesc[3].base = CPHYSADDR(PFN_ALIGN(&_end)); mdesc[3].size = memsize - mdesc[3].base; return &mdesc[0]; -- cgit v1.2.3 From d35d473c25d43d7db3e5e18b66d558d2a631cca8 Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Mon, 3 Apr 2006 13:17:41 +0100 Subject: [MIPS] Fix the crime against humanity that mipsIRQ.S is. Signed-off-by: Ralf Baechle --- arch/mips/mips-boards/atlas/Makefile | 2 +- arch/mips/mips-boards/atlas/atlas-irq.S | 120 ++++++++++++++++++++++++ arch/mips/mips-boards/generic/Makefile | 4 +- arch/mips/mips-boards/generic/mipsIRQ.S | 157 -------------------------------- arch/mips/mips-boards/malta/Makefile | 2 +- arch/mips/mips-boards/malta/malta-irq.S | 122 +++++++++++++++++++++++++ arch/mips/mips-boards/sead/Makefile | 2 +- arch/mips/mips-boards/sead/sead-irq.S | 111 ++++++++++++++++++++++ 8 files changed, 358 insertions(+), 162 deletions(-) create mode 100644 arch/mips/mips-boards/atlas/atlas-irq.S delete mode 100644 arch/mips/mips-boards/generic/mipsIRQ.S create mode 100644 arch/mips/mips-boards/malta/malta-irq.S create mode 100644 arch/mips/mips-boards/sead/sead-irq.S (limited to 'arch') diff --git a/arch/mips/mips-boards/atlas/Makefile b/arch/mips/mips-boards/atlas/Makefile index d8dab75906b..50fec2a5aee 100644 --- a/arch/mips/mips-boards/atlas/Makefile +++ b/arch/mips/mips-boards/atlas/Makefile @@ -16,5 +16,5 @@ # 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. # -obj-y := atlas_int.o atlas_setup.o +obj-y := atlas_int.o atlas-irq.o atlas_setup.o obj-$(CONFIG_KGDB) += atlas_gdb.o diff --git a/arch/mips/mips-boards/atlas/atlas-irq.S b/arch/mips/mips-boards/atlas/atlas-irq.S new file mode 100644 index 00000000000..31bc99a5238 --- /dev/null +++ b/arch/mips/mips-boards/atlas/atlas-irq.S @@ -0,0 +1,120 @@ +/* + * Carsten Langgaard, carstenl@mips.com + * Copyright (C) 1999, 2000 MIPS Technologies, Inc. All rights reserved. + * + * This program is free software; you can distribute it and/or modify it + * under the terms of the GNU General Public License (Version 2) as + * published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License + * for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. + * + * Interrupt exception dispatch code. + */ +#include + +#include +#include +#include +#include +#include + +/* + * Furthermore, the IRQs on the MIPS board look basically (barring software + * IRQs which we don't use at all and all external interrupt sources are + * combined together on hardware interrupt 0 (MIPS IRQ 2)) like: + * + * MIPS IRQ Source + * -------- ------ + * 0 Software (ignored) + * 1 Software (ignored) + * 2 Combined hardware interrupt (hw0) + * 3 Hardware (ignored) + * 4 Hardware (ignored) + * 5 Hardware (ignored) + * 6 Hardware (ignored) + * 7 R4k timer (what we use) + * + * Note: On the SEAD board thing are a little bit different. + * Here IRQ 2 (hw0) is wired to the UART0 and IRQ 3 (hw1) is wired + * wired to UART1. + * + * We handle the IRQ according to _our_ priority which is: + * + * Highest ---- R4k Timer + * Lowest ---- Combined hardware interrupt + * + * then we just return, if multiple IRQs are pending then we will just take + * another exception, big deal. + */ + + .text + .set noreorder + .set noat + .align 5 + NESTED(mipsIRQ, PT_SIZE, sp) + SAVE_ALL + CLI + .set at + + mfc0 s0, CP0_CAUSE # get irq bits + mfc0 s1, CP0_STATUS # get irq mask + andi s0, ST0_IM # CAUSE.CE may be non-zero! + and s0, s1 + +#if defined(CONFIG_CPU_MIPS32) || defined(CONFIG_CPU_MIPS64) + .set mips32 + clz a0, s0 + .set mips0 + negu a0 + addu a0, 31-CAUSEB_IP + bltz a0, spurious +#else + beqz s0, spurious + li a0, 7 + + and t0, s0, 0xf000 + sltiu t0, t0, 1 + sll t0, 2 + subu a0, t0 + sll s0, t0 + + and t0, s0, 0xc000 + sltiu t0, t0, 1 + sll t0, 1 + subu a0, t0 + sll s0, t0 + + and t0, s0, 0x8000 + sltiu t0, t0, 1 + # sll t0, 0 + subu a0, t0 + # sll s0, t0 +#endif + + li a1, MIPSCPU_INT_ATLAS + bne a0, a1, 1f + addu a0, MIPSCPU_INT_BASE + + jal atlas_hw0_irqdispatch + move a0, sp + + j ret_from_irq + nop + +1: jal do_IRQ + move a1, sp + + j ret_from_irq + nop + +spurious: + j spurious_interrupt + nop + END(mipsIRQ) diff --git a/arch/mips/mips-boards/generic/Makefile b/arch/mips/mips-boards/generic/Makefile index b21bc6887fa..be47c1c2bc8 100644 --- a/arch/mips/mips-boards/generic/Makefile +++ b/arch/mips/mips-boards/generic/Makefile @@ -18,8 +18,8 @@ # Makefile for the MIPS boards generic routines under Linux. # -obj-y := mipsIRQ.o reset.o display.o init.o memory.o \ - printf.o cmdline.o time.o +obj-y := reset.o display.o init.o memory.o printf.o \ + cmdline.o time.o obj-$(CONFIG_PCI) += pci.o obj-$(CONFIG_KGDB) += gdb_hook.o diff --git a/arch/mips/mips-boards/generic/mipsIRQ.S b/arch/mips/mips-boards/generic/mipsIRQ.S deleted file mode 100644 index 973e10aaacd..00000000000 --- a/arch/mips/mips-boards/generic/mipsIRQ.S +++ /dev/null @@ -1,157 +0,0 @@ -/* - * Carsten Langgaard, carstenl@mips.com - * Copyright (C) 1999, 2000 MIPS Technologies, Inc. All rights reserved. - * - * ######################################################################## - * - * This program is free software; you can distribute it and/or modify it - * under the terms of the GNU General Public License (Version 2) as - * published by the Free Software Foundation. - * - * This program is distributed in the hope it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License - * for more details. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. - * - * ######################################################################## - * - * Interrupt exception dispatch code. - * - */ -#include - -#include -#include -#include -#include - -#ifdef CONFIG_MIPS_ATLAS -#include -#define CASCADE_IRQ MIPSCPU_INT_ATLAS -#define CASCADE_DISPATCH atlas_hw0_irqdispatch -#endif -#ifdef CONFIG_MIPS_MALTA -#include -#define CASCADE_IRQ MIPSCPU_INT_I8259A -#define CASCADE_DISPATCH malta_hw0_irqdispatch -#endif -#ifdef CONFIG_MIPS_SEAD -#include -#endif - -/* A lot of complication here is taken away because: - * - * 1) We handle one interrupt and return, sitting in a loop and moving across - * all the pending IRQ bits in the cause register is _NOT_ the answer, the - * common case is one pending IRQ so optimize in that direction. - * - * 2) We need not check against bits in the status register IRQ mask, that - * would make this routine slow as hell. - * - * 3) Linux only thinks in terms of all IRQs on or all IRQs off, nothing in - * between like BSD spl() brain-damage. - * - * Furthermore, the IRQs on the MIPS board look basically (barring software - * IRQs which we don't use at all and all external interrupt sources are - * combined together on hardware interrupt 0 (MIPS IRQ 2)) like: - * - * MIPS IRQ Source - * -------- ------ - * 0 Software (ignored) - * 1 Software (ignored) - * 2 Combined hardware interrupt (hw0) - * 3 Hardware (ignored) - * 4 Hardware (ignored) - * 5 Hardware (ignored) - * 6 Hardware (ignored) - * 7 R4k timer (what we use) - * - * Note: On the SEAD board thing are a little bit different. - * Here IRQ 2 (hw0) is wired to the UART0 and IRQ 3 (hw1) is wired - * wired to UART1. - * - * We handle the IRQ according to _our_ priority which is: - * - * Highest ---- R4k Timer - * Lowest ---- Combined hardware interrupt - * - * then we just return, if multiple IRQs are pending then we will just take - * another exception, big deal. - */ - - .text - .set noreorder - .set noat - .align 5 - NESTED(mipsIRQ, PT_SIZE, sp) - SAVE_ALL - CLI - .set at - - mfc0 s0, CP0_CAUSE # get irq bits - mfc0 s1, CP0_STATUS # get irq mask - andi s0, ST0_IM # CAUSE.CE may be non-zero! - and s0, s1 - -#if defined(CONFIG_CPU_MIPS32) || defined(CONFIG_CPU_MIPS64) - .set mips32 - clz a0, s0 - .set mips0 - negu a0 - addu a0, 31-CAUSEB_IP - bltz a0, spurious -#else - beqz s0, spurious - li a0, 7 - - and t0, s0, 0xf000 - sltiu t0, t0, 1 - sll t0, 2 - subu a0, t0 - sll s0, t0 - - and t0, s0, 0xc000 - sltiu t0, t0, 1 - sll t0, 1 - subu a0, t0 - sll s0, t0 - - and t0, s0, 0x8000 - sltiu t0, t0, 1 - # sll t0, 0 - subu a0, t0 - # sll s0, t0 -#endif - -#ifdef CASCADE_IRQ - li a1, CASCADE_IRQ - bne a0, a1, 1f - addu a0, MIPSCPU_INT_BASE - - jal CASCADE_DISPATCH - move a0, sp - - j ret_from_irq - nop -1: -#else - addu a0, MIPSCPU_INT_BASE -#endif - - jal do_IRQ - move a1, sp - - j ret_from_irq - nop - - -spurious: - jal spurious_interrupt - nop - j ret_from_irq - nop - END(mipsIRQ) diff --git a/arch/mips/mips-boards/malta/Makefile b/arch/mips/mips-boards/malta/Makefile index fd4c143c0e2..3ae8fe6c007 100644 --- a/arch/mips/mips-boards/malta/Makefile +++ b/arch/mips/mips-boards/malta/Makefile @@ -19,4 +19,4 @@ # under Linux. # -obj-y := malta_int.o malta_setup.o +obj-y := malta_int.o malta-irq.o malta_setup.o diff --git a/arch/mips/mips-boards/malta/malta-irq.S b/arch/mips/mips-boards/malta/malta-irq.S new file mode 100644 index 00000000000..6217aff3be0 --- /dev/null +++ b/arch/mips/mips-boards/malta/malta-irq.S @@ -0,0 +1,122 @@ +/* + * Carsten Langgaard, carstenl@mips.com + * Copyright (C) 1999, 2000 MIPS Technologies, Inc. All rights reserved. + * + * ######################################################################## + * + * This program is free software; you can distribute it and/or modify it + * under the terms of the GNU General Public License (Version 2) as + * published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License + * for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. + * + * ######################################################################## + * + * Interrupt exception dispatch code. + * + */ +#include + +#include +#include +#include +#include +#include + +/* + * IRQs on the Malta board look basically (barring software IRQs which we + * don't use at all and all external interrupt sources are combined together + * on hardware interrupt 0 (MIPS IRQ 2)) like: + * + * MIPS IRQ Source + * -------- ------ + * 0 Software (ignored) + * 1 Software (ignored) + * 2 Combined hardware interrupt (hw0) + * 3 Hardware (ignored) + * 4 Hardware (ignored) + * 5 Hardware (ignored) + * 6 Hardware (ignored) + * 7 R4k timer (what we use) + * + * We handle the IRQ according to _our_ priority which is: + * + * Highest ---- R4k Timer + * Lowest ---- Combined hardware interrupt + * + * then we just return, if multiple IRQs are pending then we will just take + * another exception, big deal. + */ + + .text + .set noreorder + .set noat + .align 5 + NESTED(mipsIRQ, PT_SIZE, sp) + SAVE_ALL + CLI + .set at + + mfc0 s0, CP0_CAUSE # get irq bits + mfc0 s1, CP0_STATUS # get irq mask + andi s0, ST0_IM # CAUSE.CE may be non-zero! + and s0, s1 + +#if defined(CONFIG_CPU_MIPS32) || defined(CONFIG_CPU_MIPS64) + .set mips32 + clz a0, s0 + .set mips0 + negu a0 + addu a0, 31-CAUSEB_IP + bltz a0, spurious +#else + beqz s0, spurious + li a0, 7 + + and t0, s0, 0xf000 + sltiu t0, t0, 1 + sll t0, 2 + subu a0, t0 + sll s0, t0 + + and t0, s0, 0xc000 + sltiu t0, t0, 1 + sll t0, 1 + subu a0, t0 + sll s0, t0 + + and t0, s0, 0x8000 + sltiu t0, t0, 1 + # sll t0, 0 + subu a0, t0 + # sll s0, t0 +#endif + + li a1, MIPSCPU_INT_I8259A + bne a0, a1, 1f + addu a0, MIPSCPU_INT_BASE + + jal malta_hw0_irqdispatch + move a0, sp + + j ret_from_irq + nop +1: + + jal do_IRQ + move a1, sp + + j ret_from_irq + nop + +spurious: + j spurious_interrupt + nop + END(mipsIRQ) diff --git a/arch/mips/mips-boards/sead/Makefile b/arch/mips/mips-boards/sead/Makefile index 224bb848f16..01780b60534 100644 --- a/arch/mips/mips-boards/sead/Makefile +++ b/arch/mips/mips-boards/sead/Makefile @@ -23,4 +23,4 @@ # under Linux. # -obj-y := sead_int.o sead_setup.o +obj-y := sead_int.o sead-irq.o sead_setup.o diff --git a/arch/mips/mips-boards/sead/sead-irq.S b/arch/mips/mips-boards/sead/sead-irq.S new file mode 100644 index 00000000000..d5dea1d2e22 --- /dev/null +++ b/arch/mips/mips-boards/sead/sead-irq.S @@ -0,0 +1,111 @@ +/* + * Carsten Langgaard, carstenl@mips.com + * Copyright (C) 1999, 2000 MIPS Technologies, Inc. All rights reserved. + * + * ######################################################################## + * + * This program is free software; you can distribute it and/or modify it + * under the terms of the GNU General Public License (Version 2) as + * published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License + * for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. + * + * ######################################################################## + * + * Interrupt exception dispatch code. + * + */ +#include + +#include +#include +#include +#include +#include + +/* + * IRQs on the SEAD board look basically are combined together on hardware + * interrupt 0 (MIPS IRQ 2)) like: + * + * MIPS IRQ Source + * -------- ------ + * 0 Software (ignored) + * 1 Software (ignored) + * 2 UART0 (hw0) + * 3 UART1 (hw1) + * 4 Hardware (ignored) + * 5 Hardware (ignored) + * 6 Hardware (ignored) + * 7 R4k timer (what we use) + * + * We handle the IRQ according to _our_ priority which is: + * + * Highest ---- R4k Timer + * Lowest ---- Combined hardware interrupt + * + * then we just return, if multiple IRQs are pending then we will just take + * another exception, big deal. + */ + + .text + .set noreorder + .set noat + .align 5 + NESTED(mipsIRQ, PT_SIZE, sp) + SAVE_ALL + CLI + .set at + + mfc0 s0, CP0_CAUSE # get irq bits + mfc0 s1, CP0_STATUS # get irq mask + andi s0, ST0_IM # CAUSE.CE may be non-zero! + and s0, s1 + +#if defined(CONFIG_CPU_MIPS32) || defined(CONFIG_CPU_MIPS64) + .set mips32 + clz a0, s0 + .set mips0 + negu a0 + addu a0, 31-CAUSEB_IP + bltz a0, spurious +#else + beqz s0, spurious + li a0, 7 + + and t0, s0, 0xf000 + sltiu t0, t0, 1 + sll t0, 2 + subu a0, t0 + sll s0, t0 + + and t0, s0, 0xc000 + sltiu t0, t0, 1 + sll t0, 1 + subu a0, t0 + sll s0, t0 + + and t0, s0, 0x8000 + sltiu t0, t0, 1 + # sll t0, 0 + subu a0, t0 + # sll s0, t0 +#endif + + addu a0, MIPSCPU_INT_BASE + jal do_IRQ + move a1, sp + + j ret_from_irq + nop + +spurious: + j spurious_interrupt + nop + END(mipsIRQ) -- cgit v1.2.3 From e4ac58afdfac792c0583af30dbd9eae53e24c78b Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Mon, 3 Apr 2006 17:56:36 +0100 Subject: [MIPS] Rewrite all the assembler interrupt handlers to C. Saves like 1,600 lines of code, is way easier to debug, compilers frequently do a better job than the cut and paste type of handlers many boards had. And finally having all the stuff done in a single place also means alot of bug potencial for the MT ASE is gone. The only surviving handler in assembler is the DECstation one; I hope Maciej will rewrite it. Signed-off-by: Ralf Baechle --- arch/mips/au1000/common/Makefile | 2 +- arch/mips/au1000/common/int-handler.S | 69 ------ arch/mips/au1000/common/irq.c | 20 +- arch/mips/cobalt/Makefile | 2 +- arch/mips/cobalt/int-handler.S | 25 --- arch/mips/cobalt/irq.c | 6 +- arch/mips/ddb5xxx/ddb5074/Makefile | 2 +- arch/mips/ddb5xxx/ddb5074/int-handler.S | 120 ----------- arch/mips/ddb5xxx/ddb5074/irq.c | 26 ++- arch/mips/ddb5xxx/ddb5476/Makefile | 2 +- arch/mips/ddb5xxx/ddb5476/int-handler.S | 113 ---------- arch/mips/ddb5xxx/ddb5476/irq.c | 30 ++- arch/mips/ddb5xxx/ddb5476/vrc5476_irq.c | 2 +- arch/mips/ddb5xxx/ddb5477/Makefile | 2 +- arch/mips/ddb5xxx/ddb5477/int-handler.S | 75 ------- arch/mips/ddb5xxx/ddb5477/irq.c | 24 ++- arch/mips/dec/int-handler.S | 10 +- arch/mips/dec/setup.c | 3 - arch/mips/galileo-boards/ev96100/Makefile | 2 +- arch/mips/galileo-boards/ev96100/int-handler.S | 34 --- arch/mips/galileo-boards/ev96100/irq.c | 17 +- arch/mips/gt64120/ev64120/Makefile | 2 +- arch/mips/gt64120/ev64120/int-handler.S | 114 ---------- arch/mips/gt64120/ev64120/irq.c | 27 +-- arch/mips/gt64120/momenco_ocelot/Makefile | 2 +- arch/mips/gt64120/momenco_ocelot/int-handler.S | 131 ------------ arch/mips/gt64120/momenco_ocelot/irq.c | 36 +++- arch/mips/ite-boards/generic/Makefile | 2 +- arch/mips/ite-boards/generic/int-handler.S | 63 ------ arch/mips/ite-boards/generic/irq.c | 15 +- arch/mips/jazz/Makefile | 2 +- arch/mips/jazz/int-handler.S | 283 ------------------------- arch/mips/jazz/irq.c | 78 ++++++- arch/mips/jmr3927/rbhma3100/Makefile | 2 +- arch/mips/jmr3927/rbhma3100/int-handler.S | 74 ------- arch/mips/jmr3927/rbhma3100/irq.c | 6 +- arch/mips/kernel/genex.S | 14 ++ arch/mips/kernel/traps.c | 2 + arch/mips/lasat/Makefile | 2 +- arch/mips/lasat/interrupt.c | 14 +- arch/mips/lasat/lasatIRQ.S | 69 ------ arch/mips/mips-boards/atlas/Makefile | 2 +- arch/mips/mips-boards/atlas/atlas-irq.S | 120 ----------- arch/mips/mips-boards/atlas/atlas_int.c | 92 +++++++- arch/mips/mips-boards/malta/Makefile | 2 +- arch/mips/mips-boards/malta/malta-irq.S | 122 ----------- arch/mips/mips-boards/malta/malta_int.c | 91 +++++++- arch/mips/mips-boards/sead/Makefile | 2 +- arch/mips/mips-boards/sead/sead-irq.S | 111 ---------- arch/mips/mips-boards/sead/sead_int.c | 86 +++++++- arch/mips/mips-boards/sim/sim_int.c | 64 +++++- arch/mips/momentum/jaguar_atx/Makefile | 2 +- arch/mips/momentum/jaguar_atx/int-handler.S | 128 ----------- arch/mips/momentum/jaguar_atx/irq.c | 35 ++- arch/mips/momentum/ocelot_3/Makefile | 2 +- arch/mips/momentum/ocelot_3/int-handler.S | 139 ------------ arch/mips/momentum/ocelot_3/irq.c | 38 +++- arch/mips/momentum/ocelot_c/Makefile | 2 +- arch/mips/momentum/ocelot_c/int-handler.S | 103 --------- arch/mips/momentum/ocelot_c/irq.c | 30 ++- arch/mips/momentum/ocelot_g/Makefile | 2 +- arch/mips/momentum/ocelot_g/int-handler.S | 131 ------------ arch/mips/momentum/ocelot_g/irq.c | 38 +++- arch/mips/philips/pnx8550/common/Makefile | 2 +- arch/mips/philips/pnx8550/common/int.c | 23 +- arch/mips/philips/pnx8550/common/mipsIRQ.S | 77 ------- arch/mips/pmc-sierra/yosemite/Makefile | 2 +- arch/mips/pmc-sierra/yosemite/irq-handler.S | 93 -------- arch/mips/pmc-sierra/yosemite/irq.c | 33 ++- arch/mips/qemu/Makefile | 2 +- arch/mips/qemu/q-int.S | 17 -- arch/mips/qemu/q-irq.c | 3 +- arch/mips/sgi-ip22/Makefile | 2 +- arch/mips/sgi-ip22/ip22-int.c | 59 +++++- arch/mips/sgi-ip22/ip22-irq.S | 118 ----------- arch/mips/sgi-ip27/Makefile | 2 +- arch/mips/sgi-ip27/TODO | 4 - arch/mips/sgi-ip27/ip27-irq-glue.S | 45 ---- arch/mips/sgi-ip27/ip27-irq.c | 27 ++- arch/mips/sgi-ip32/Makefile | 2 +- arch/mips/sgi-ip32/ip32-irq-glue.S | 86 -------- arch/mips/sgi-ip32/ip32-irq.c | 33 ++- arch/mips/sibyte/bcm1480/Makefile | 2 +- arch/mips/sibyte/bcm1480/irq.c | 77 ++++++- arch/mips/sibyte/bcm1480/irq_handler.S | 165 -------------- arch/mips/sibyte/sb1250/Makefile | 2 +- arch/mips/sibyte/sb1250/irq.c | 78 ++++++- arch/mips/sibyte/sb1250/irq_handler.S | 147 ------------- arch/mips/sni/Makefile | 2 +- arch/mips/sni/int-handler.S | 106 --------- arch/mips/sni/irq.c | 37 +++- arch/mips/tx4927/common/Makefile | 2 +- arch/mips/tx4927/common/tx4927_irq.c | 30 ++- arch/mips/tx4927/common/tx4927_irq_handler.S | 104 --------- arch/mips/tx4938/common/Makefile | 2 +- arch/mips/tx4938/common/irq.c | 21 +- arch/mips/tx4938/common/irq_handler.S | 84 -------- arch/mips/vr41xx/common/Makefile | 2 +- arch/mips/vr41xx/common/int-handler.S | 116 ---------- arch/mips/vr41xx/common/irq.c | 29 ++- 100 files changed, 1114 insertions(+), 3388 deletions(-) delete mode 100644 arch/mips/au1000/common/int-handler.S delete mode 100644 arch/mips/cobalt/int-handler.S delete mode 100644 arch/mips/ddb5xxx/ddb5074/int-handler.S delete mode 100644 arch/mips/ddb5xxx/ddb5476/int-handler.S delete mode 100644 arch/mips/ddb5xxx/ddb5477/int-handler.S delete mode 100644 arch/mips/galileo-boards/ev96100/int-handler.S delete mode 100644 arch/mips/gt64120/ev64120/int-handler.S delete mode 100644 arch/mips/gt64120/momenco_ocelot/int-handler.S delete mode 100644 arch/mips/ite-boards/generic/int-handler.S delete mode 100644 arch/mips/jazz/int-handler.S delete mode 100644 arch/mips/jmr3927/rbhma3100/int-handler.S delete mode 100644 arch/mips/lasat/lasatIRQ.S delete mode 100644 arch/mips/mips-boards/atlas/atlas-irq.S delete mode 100644 arch/mips/mips-boards/malta/malta-irq.S delete mode 100644 arch/mips/mips-boards/sead/sead-irq.S delete mode 100644 arch/mips/momentum/jaguar_atx/int-handler.S delete mode 100644 arch/mips/momentum/ocelot_3/int-handler.S delete mode 100644 arch/mips/momentum/ocelot_c/int-handler.S delete mode 100644 arch/mips/momentum/ocelot_g/int-handler.S delete mode 100644 arch/mips/philips/pnx8550/common/mipsIRQ.S delete mode 100644 arch/mips/pmc-sierra/yosemite/irq-handler.S delete mode 100644 arch/mips/qemu/q-int.S delete mode 100644 arch/mips/sgi-ip22/ip22-irq.S delete mode 100644 arch/mips/sgi-ip27/ip27-irq-glue.S delete mode 100644 arch/mips/sgi-ip32/ip32-irq-glue.S delete mode 100644 arch/mips/sibyte/bcm1480/irq_handler.S delete mode 100644 arch/mips/sibyte/sb1250/irq_handler.S delete mode 100644 arch/mips/sni/int-handler.S delete mode 100644 arch/mips/tx4927/common/tx4927_irq_handler.S delete mode 100644 arch/mips/tx4938/common/irq_handler.S delete mode 100644 arch/mips/vr41xx/common/int-handler.S (limited to 'arch') diff --git a/arch/mips/au1000/common/Makefile b/arch/mips/au1000/common/Makefile index a1edfd1f643..bf682f50b85 100644 --- a/arch/mips/au1000/common/Makefile +++ b/arch/mips/au1000/common/Makefile @@ -6,7 +6,7 @@ # Makefile for the Alchemy Au1000 CPU, generic files. # -obj-y += prom.o int-handler.o irq.o puts.o time.o reset.o \ +obj-y += prom.o irq.o puts.o time.o reset.o \ au1xxx_irqmap.o clocks.o platform.o power.o setup.o \ sleeper.o cputable.o dma.o dbdma.o gpio.o diff --git a/arch/mips/au1000/common/int-handler.S b/arch/mips/au1000/common/int-handler.S deleted file mode 100644 index 65baa8a8c52..00000000000 --- a/arch/mips/au1000/common/int-handler.S +++ /dev/null @@ -1,69 +0,0 @@ -/* - * Copyright 2001 MontaVista Software Inc. - * Author: ppopov@mvista.com - * - * Interrupt dispatcher for Au1000 boards. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - */ -#include -#include -#include -#include -#include - - .text - .set macro - .set noat - .align 5 - -NESTED(au1000_IRQ, PT_SIZE, sp) - SAVE_ALL - CLI # Important: mark KERNEL mode ! - - mfc0 t0,CP0_CAUSE # get pending interrupts - mfc0 t1,CP0_STATUS # get enabled interrupts - and t0,t1 # isolate allowed ones - - andi t0,0xff00 # isolate pending bits - beqz t0, 3f # spurious interrupt - - andi a0, t0, CAUSEF_IP7 - beq a0, zero, 1f - move a0, sp - jal mips_timer_interrupt - j ret_from_irq - -1: - andi a0, t0, CAUSEF_IP2 # Interrupt Controller 0, Request 0 - beq a0, zero, 2f - move a0,sp - jal intc0_req0_irqdispatch - j ret_from_irq -2: - andi a0, t0, CAUSEF_IP3 # Interrupt Controller 0, Request 1 - beq a0, zero, 3f - move a0,sp - jal intc0_req1_irqdispatch - j ret_from_irq -3: - andi a0, t0, CAUSEF_IP4 # Interrupt Controller 1, Request 0 - beq a0, zero, 4f - move a0,sp - jal intc1_req0_irqdispatch - j ret_from_irq -4: - andi a0, t0, CAUSEF_IP5 # Interrupt Controller 1, Request 1 - beq a0, zero, 5f - move a0, sp - jal intc1_req1_irqdispatch - j ret_from_irq - -5: - move a0, sp - jal spurious_interrupt - j ret_from_irq -END(au1000_IRQ) diff --git a/arch/mips/au1000/common/irq.c b/arch/mips/au1000/common/irq.c index 1339a0979f6..da61de77615 100644 --- a/arch/mips/au1000/common/irq.c +++ b/arch/mips/au1000/common/irq.c @@ -66,7 +66,6 @@ #define EXT_INTC1_REQ1 5 /* IP 5 */ #define MIPS_TIMER_IP 7 /* IP 7 */ -extern asmlinkage void au1000_IRQ(void); extern void set_debug_traps(void); extern irq_cpustat_t irq_stat [NR_CPUS]; @@ -446,7 +445,6 @@ void __init arch_init_irq(void) extern int au1xxx_ic0_nr_irqs; cp0_status = read_c0_status(); - set_except_vector(0, au1000_IRQ); /* Initialize interrupt controllers to a safe state. */ @@ -661,3 +659,21 @@ restore_au1xxx_intctl(void) au_writel(sleep_intctl_mask[0], IC0_MASKSET); au_sync(); } #endif /* CONFIG_PM */ + +asmlinkage void plat_irq_dispatch(struct pt_regs *regs) +{ + unsigned int pending = read_c0_status() & read_c0_cause() & ST0_IM; + + if (pending & CAUSEF_IP7) + mips_timer_interrupt(regs); + else if (pending & CAUSEF_IP2) + intc0_req0_irqdispatch(regs); + else if (pending & CAUSEF_IP3) + intc0_req1_irqdispatch(regs); + else if (pending & CAUSEF_IP4) + intc1_req0_irqdispatch(regs); + else if (pending & CAUSEF_IP5) + intc1_req1_irqdispatch(regs); + else + spurious_interrupt(regs); +} diff --git a/arch/mips/cobalt/Makefile b/arch/mips/cobalt/Makefile index 720e757b2b6..225ac8f34cc 100644 --- a/arch/mips/cobalt/Makefile +++ b/arch/mips/cobalt/Makefile @@ -2,7 +2,7 @@ # Makefile for the Cobalt micro systems family specific parts of the kernel # -obj-y := irq.o int-handler.o reset.o setup.o +obj-y := irq.o reset.o setup.o obj-$(CONFIG_EARLY_PRINTK) += console.o diff --git a/arch/mips/cobalt/int-handler.S b/arch/mips/cobalt/int-handler.S deleted file mode 100644 index e75d5e3ca86..00000000000 --- a/arch/mips/cobalt/int-handler.S +++ /dev/null @@ -1,25 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 1995, 1996, 1997, 2003 by Ralf Baechle - * Copyright (C) 2001, 2002, 2003 by Liam Davies (ldavies@agile.tv) - */ -#include -#include -#include -#include -#include - - .text - .align 5 - NESTED(cobalt_handle_int, PT_SIZE, sp) - SAVE_ALL - CLI - - PTR_LA ra, ret_from_irq - move a0, sp - j cobalt_irq - - END(cobalt_handle_int) diff --git a/arch/mips/cobalt/irq.c b/arch/mips/cobalt/irq.c index f9a108820d6..0b75f4fb719 100644 --- a/arch/mips/cobalt/irq.c +++ b/arch/mips/cobalt/irq.c @@ -20,8 +20,6 @@ #include -extern void cobalt_handle_int(void); - /* * We have two types of interrupts that we handle, ones that come in through * the CPU interrupt lines, and ones that come in on the via chip. The CPU @@ -79,7 +77,7 @@ static inline void via_pic_irq(struct pt_regs *regs) do_IRQ(irq, regs); } -asmlinkage void cobalt_irq(struct pt_regs *regs) +asmlinkage void plat_irq_dispatch(struct pt_regs *regs) { unsigned pending; @@ -122,8 +120,6 @@ void __init arch_init_irq(void) */ GALILEO_OUTL(0, GT_INTRMASK_OFS); - set_except_vector(0, cobalt_handle_int); - init_i8259_irqs(); /* 0 ... 15 */ mips_cpu_irq_init(COBALT_CPU_IRQ); /* 16 ... 23 */ diff --git a/arch/mips/ddb5xxx/ddb5074/Makefile b/arch/mips/ddb5xxx/ddb5074/Makefile index 488206b8d94..304c02107b4 100644 --- a/arch/mips/ddb5xxx/ddb5074/Makefile +++ b/arch/mips/ddb5xxx/ddb5074/Makefile @@ -3,6 +3,6 @@ # under Linux. # -obj-y += setup.o irq.o int-handler.o nile4_pic.o +obj-y += setup.o irq.o nile4_pic.o EXTRA_AFLAGS := $(CFLAGS) diff --git a/arch/mips/ddb5xxx/ddb5074/int-handler.S b/arch/mips/ddb5xxx/ddb5074/int-handler.S deleted file mode 100644 index a78644150b3..00000000000 --- a/arch/mips/ddb5xxx/ddb5074/int-handler.S +++ /dev/null @@ -1,120 +0,0 @@ -/* - * arch/mips/ddb5074/int-handler.S -- NEC DDB Vrc-5074 interrupt handler - * - * Based on arch/mips/sgi/kernel/indyIRQ.S - * - * Copyright (C) 1996 David S. Miller (dm@engr.sgi.com) - * - * Copyright (C) 2000 Geert Uytterhoeven - * Sony Software Development Center Europe (SDCE), Brussels - */ -#include -#include -#include -#include - -/* A lot of complication here is taken away because: - * - * 1) We handle one interrupt and return, sitting in a loop and moving across - * all the pending IRQ bits in the cause register is _NOT_ the answer, the - * common case is one pending IRQ so optimize in that direction. - * - * 2) We need not check against bits in the status register IRQ mask, that - * would make this routine slow as hell. - * - * 3) Linux only thinks in terms of all IRQs on or all IRQs off, nothing in - * between like BSD spl() brain-damage. - * - * Furthermore, the IRQs on the INDY look basically (barring software IRQs - * which we don't use at all) like: - * - * MIPS IRQ Source - * -------- ------ - * 0 Software (ignored) - * 1 Software (ignored) - * 2 Local IRQ level zero - * 3 Local IRQ level one - * 4 8254 Timer zero - * 5 8254 Timer one - * 6 Bus Error - * 7 R4k timer (what we use) - * - * We handle the IRQ according to _our_ priority which is: - * - * Highest ---- R4k Timer - * Local IRQ zero - * Local IRQ one - * Bus Error - * 8254 Timer zero - * Lowest ---- 8254 Timer one - * - * then we just return, if multiple IRQs are pending then we will just take - * another exception, big deal. - */ - - .text - .set noreorder - .set noat - .align 5 - NESTED(ddbIRQ, PT_SIZE, sp) - SAVE_ALL - CLI - .set at - mfc0 s0, CP0_CAUSE # get irq mask - -#if 1 - mfc0 t2,CP0_STATUS # get enabled interrupts - and s0,t2 # isolate allowed ones -#endif - /* First we check for r4k counter/timer IRQ. */ - andi a0, s0, CAUSEF_IP2 # delay slot, check local level zero - beq a0, zero, 1f - andi a0, s0, CAUSEF_IP3 # delay slot, check local level one - - /* Wheee, local level zero interrupt. */ - jal ddb_local0_irqdispatch - move a0, sp # delay slot - - j ret_from_irq - nop # delay slot - -1: - beq a0, zero, 1f - andi a0, s0, CAUSEF_IP6 # delay slot, check bus error - - /* Wheee, local level one interrupt. */ - move a0, sp - jal ddb_local1_irqdispatch - nop - - j ret_from_irq - nop - -1: - beq a0, zero, 1f - nop - - /* Wheee, an asynchronous bus error... */ - move a0, sp - jal ddb_buserror_irq - nop - - j ret_from_irq - nop - -1: - /* Here by mistake? This is possible, what can happen - * is that by the time we take the exception the IRQ - * pin goes low, so just leave if this is the case. - */ - andi a0, s0, (CAUSEF_IP4 | CAUSEF_IP5) - beq a0, zero, 1f - - /* Must be one of the 8254 timers... */ - move a0, sp - jal ddb_8254timer_irq - nop -1: - j ret_from_irq - nop - END(ddbIRQ) diff --git a/arch/mips/ddb5xxx/ddb5074/irq.c b/arch/mips/ddb5xxx/ddb5074/irq.c index 45088a1be41..60c087b7738 100644 --- a/arch/mips/ddb5xxx/ddb5074/irq.c +++ b/arch/mips/ddb5xxx/ddb5074/irq.c @@ -21,8 +21,6 @@ #include -extern asmlinkage void ddbIRQ(void); - static struct irqaction irq_cascade = { no_action, 0, CPU_MASK_NONE, "cascade", NULL, NULL }; #define M1543_PNP_CONFIG 0x03f0 /* PnP Config Port */ @@ -90,7 +88,7 @@ static void m1543_irq_setup(void) } -void ddb_local0_irqdispatch(struct pt_regs *regs) +static void ddb_local0_irqdispatch(struct pt_regs *regs) { u32 mask; int nile4_irq; @@ -118,29 +116,41 @@ void ddb_local0_irqdispatch(struct pt_regs *regs) } } -void ddb_local1_irqdispatch(void) +static void ddb_local1_irqdispatch(void) { printk("ddb_local1_irqdispatch called\n"); } -void ddb_buserror_irq(void) +static void ddb_buserror_irq(void) { printk("ddb_buserror_irq called\n"); } -void ddb_8254timer_irq(void) +static void ddb_8254timer_irq(void) { printk("ddb_8254timer_irq called\n"); } +asmlinkage void plat_irq_dispatch(struct pt_regs *regs) +{ + unsigned int pending = read_c0_cause() & read_c0_status(); + + if (pending & CAUSEF_IP2) + ddb_local0_irqdispatch(regs); + else if (pending & CAUSEF_IP3) + ddb_local1_irqdispatch(); + else if (pending & CAUSEF_IP6) + ddb_buserror_irq(); + else if (pending & (CAUSEF_IP4 | CAUSEF_IP5)) + ddb_8254timer_irq(); +} + void __init arch_init_irq(void) { /* setup cascade interrupts */ setup_irq(NILE4_IRQ_BASE + NILE4_INT_INTE, &irq_cascade); setup_irq(CPU_IRQ_BASE + CPU_NILE4_CASCADE, &irq_cascade); - set_except_vector(0, ddbIRQ); - nile4_irq_setup(NILE4_IRQ_BASE); m1543_irq_setup(); init_i8259_irqs(); diff --git a/arch/mips/ddb5xxx/ddb5476/Makefile b/arch/mips/ddb5xxx/ddb5476/Makefile index 61eec363cb0..ab0312cb47b 100644 --- a/arch/mips/ddb5xxx/ddb5476/Makefile +++ b/arch/mips/ddb5xxx/ddb5476/Makefile @@ -3,7 +3,7 @@ # under Linux. # -obj-y += setup.o irq.o int-handler.o nile4_pic.o vrc5476_irq.o +obj-y += setup.o irq.o nile4_pic.o vrc5476_irq.o obj-$(CONFIG_KGDB) += dbg_io.o EXTRA_AFLAGS := $(CFLAGS) diff --git a/arch/mips/ddb5xxx/ddb5476/int-handler.S b/arch/mips/ddb5xxx/ddb5476/int-handler.S deleted file mode 100644 index 0c2bdae96bb..00000000000 --- a/arch/mips/ddb5xxx/ddb5476/int-handler.S +++ /dev/null @@ -1,113 +0,0 @@ -/* - * Copyright 2001 MontaVista Software Inc. - * Author: jsun@mvista.com or jsun@junsun.net - * - * First-level interrupt dispatcher for ddb5476 - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - */ -#include -#include -#include -#include -#include - -#include - -/* - * first level interrupt dispatcher for ocelot board - - * We check for the timer first, then check PCI ints A and D. - * Then check for serial IRQ and fall through. - */ - .align 5 - NESTED(ddb5476_handle_int, PT_SIZE, sp) - SAVE_ALL - CLI - .set at - .set noreorder - mfc0 t0, CP0_CAUSE - mfc0 t2, CP0_STATUS - - and t0, t2 - - andi t1, t0, STATUSF_IP7 /* cpu timer */ - bnez t1, ll_cpu_ip7 - andi t1, t0, STATUSF_IP2 /* vrc5476 & i8259 */ - bnez t1, ll_cpu_ip2 - andi t1, t0, STATUSF_IP3 - bnez t1, ll_cpu_ip3 - andi t1, t0, STATUSF_IP4 - bnez t1, ll_cpu_ip4 - andi t1, t0, STATUSF_IP5 - bnez t1, ll_cpu_ip5 - andi t1, t0, STATUSF_IP6 - bnez t1, ll_cpu_ip6 - andi t1, t0, STATUSF_IP0 /* software int 0 */ - bnez t1, ll_cpu_ip0 - andi t1, t0, STATUSF_IP1 /* software int 1 */ - bnez t1, ll_cpu_ip1 - nop - - .set reorder - - /* wrong alarm or masked ... */ - // jal spurious_interrupt - // j ret_from_irq - move a0, sp - jal vrc5476_irq_dispatch - j ret_from_irq - nop - - .align 5 - -ll_cpu_ip0: - li a0, CPU_IRQ_BASE + 0 - move a1, sp - jal do_IRQ - j ret_from_irq - -ll_cpu_ip1: - li a0, CPU_IRQ_BASE + 1 - move a1, sp - jal do_IRQ - j ret_from_irq - -ll_cpu_ip2: /* jump to second-level dispatching */ - move a0, sp - jal vrc5476_irq_dispatch - j ret_from_irq - -ll_cpu_ip3: - li a0, CPU_IRQ_BASE + 3 - move a1, sp - jal do_IRQ - j ret_from_irq - -ll_cpu_ip4: - li a0, CPU_IRQ_BASE + 4 - move a1, sp - jal do_IRQ - j ret_from_irq - -ll_cpu_ip5: - li a0, CPU_IRQ_BASE + 5 - move a1, sp - jal do_IRQ - j ret_from_irq - -ll_cpu_ip6: - li a0, CPU_IRQ_BASE + 6 - move a1, sp - jal do_IRQ - j ret_from_irq - -ll_cpu_ip7: - li a0, CPU_IRQ_BASE + 7 - move a1, sp - jal do_IRQ - j ret_from_irq - - END(ddb5476_handle_int) diff --git a/arch/mips/ddb5xxx/ddb5476/irq.c b/arch/mips/ddb5xxx/ddb5476/irq.c index 5388b5868c4..7583a1f3071 100644 --- a/arch/mips/ddb5xxx/ddb5476/irq.c +++ b/arch/mips/ddb5xxx/ddb5476/irq.c @@ -110,11 +110,36 @@ static void nile4_irq_setup(void) static struct irqaction irq_cascade = { no_action, 0, CPU_MASK_NONE, "cascade", NULL, NULL }; static struct irqaction irq_error = { no_action, 0, CPU_MASK_NONE, "error", NULL, NULL }; -extern asmlinkage void ddb5476_handle_int(void); extern int setup_irq(unsigned int irq, struct irqaction *irqaction); extern void mips_cpu_irq_init(u32 irq_base); extern void vrc5476_irq_init(u32 irq_base); +extern void vrc5476_irq_dispatch(struct pt_regs *regs); + +asmlinkage void plat_irq_dispatch(struct pt_regs *regs) +{ + unsigned int pending = read_c0_cause() & read_c0_status(); + + if (pending & STATUSF_IP7) + do_IRQ(CPU_IRQ_BASE + 7, regs); + else if (pending & STATUSF_IP2) + vrc5476_irq_dispatch(regs); + else if (pending & STATUSF_IP3) + do_IRQ(CPU_IRQ_BASE + 3, regs); + else if (pending & STATUSF_IP4) + do_IRQ(CPU_IRQ_BASE + 4, regs); + else if (pending & STATUSF_IP5) + do_IRQ(CPU_IRQ_BASE + 5, regs); + else if (pending & STATUSF_IP6) + do_IRQ(CPU_IRQ_BASE + 6, regs); + else if (pending & STATUSF_IP0) + do_IRQ(CPU_IRQ_BASE, regs); + else if (pending & STATUSF_IP1) + do_IRQ(CPU_IRQ_BASE + 1, regs); + + vrc5476_irq_dispatch(regs); +} + void __init arch_init_irq(void) { /* hardware initialization */ @@ -137,7 +162,4 @@ void __init arch_init_irq(void) setup_irq(VRC5476_IRQ_BASE + VRC5476_IRQ_LBRT, &irq_error); setup_irq(VRC5476_IRQ_BASE + VRC5476_IRQ_PCIS, &irq_error); setup_irq(VRC5476_IRQ_BASE + VRC5476_IRQ_PCI, &irq_error); - - /* setup the grandpa intr vector */ - set_except_vector(0, ddb5476_handle_int); } diff --git a/arch/mips/ddb5xxx/ddb5476/vrc5476_irq.c b/arch/mips/ddb5xxx/ddb5476/vrc5476_irq.c index 581eabad5f8..a3c5e7b1801 100644 --- a/arch/mips/ddb5xxx/ddb5476/vrc5476_irq.c +++ b/arch/mips/ddb5xxx/ddb5476/vrc5476_irq.c @@ -77,7 +77,7 @@ vrc5476_irq_init(u32 base) } -asmlinkage void +void vrc5476_irq_dispatch(struct pt_regs *regs) { u32 mask; diff --git a/arch/mips/ddb5xxx/ddb5477/Makefile b/arch/mips/ddb5xxx/ddb5477/Makefile index b79b43c9f93..ea68815ad17 100644 --- a/arch/mips/ddb5xxx/ddb5477/Makefile +++ b/arch/mips/ddb5xxx/ddb5477/Makefile @@ -2,7 +2,7 @@ # Makefile for NEC DDB-Vrc5477 board # -obj-y += int-handler.o irq.o irq_5477.o setup.o lcd44780.o +obj-y += irq.o irq_5477.o setup.o lcd44780.o obj-$(CONFIG_RUNTIME_DEBUG) += debug.o obj-$(CONFIG_KGDB) += kgdb_io.o diff --git a/arch/mips/ddb5xxx/ddb5477/int-handler.S b/arch/mips/ddb5xxx/ddb5477/int-handler.S deleted file mode 100644 index 9884874dbeb..00000000000 --- a/arch/mips/ddb5xxx/ddb5477/int-handler.S +++ /dev/null @@ -1,75 +0,0 @@ -/* - * Copyright 2001 MontaVista Software Inc. - * Author: jsun@mvista.com or jsun@junsun.net - * - * First-level interrupt dispatcher for ddb5477 - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - */ -#include -#include -#include -#include -#include -#include - -/* - * first level interrupt dispatcher for ocelot board - - * We check for the timer first, then check PCI ints A and D. - * Then check for serial IRQ and fall through. - */ - .align 5 - NESTED(ddb5477_handle_int, PT_SIZE, sp) - SAVE_ALL - CLI - .set at - .set noreorder - mfc0 t0, CP0_CAUSE - mfc0 t2, CP0_STATUS - - and t0, t2 - - andi t1, t0, STATUSF_IP7 /* cpu timer */ - bnez t1, ll_cputimer_irq - andi t1, t0, (STATUSF_IP2 | STATUSF_IP3 | STATUSF_IP4 | STATUSF_IP5 | STATUSF_IP6 ) - bnez t1, ll_vrc5477_irq - andi t1, t0, STATUSF_IP0 /* software int 0 */ - bnez t1, ll_cpu_ip0 - andi t1, t0, STATUSF_IP1 /* software int 1 */ - bnez t1, ll_cpu_ip1 - nop - .set reorder - - /* wrong alarm or masked ... */ - jal spurious_interrupt - j ret_from_irq - END(ddb5477_handle_int) - - .align 5 - -ll_vrc5477_irq: - move a0, sp - jal vrc5477_irq_dispatch - j ret_from_irq - -ll_cputimer_irq: - li a0, CPU_IRQ_BASE + 7 - move a1, sp - jal do_IRQ - j ret_from_irq - - -ll_cpu_ip0: - li a0, CPU_IRQ_BASE + 0 - move a1, sp - jal do_IRQ - j ret_from_irq - -ll_cpu_ip1: - li a0, CPU_IRQ_BASE + 1 - move a1, sp - jal do_IRQ - j ret_from_irq diff --git a/arch/mips/ddb5xxx/ddb5477/irq.c b/arch/mips/ddb5xxx/ddb5477/irq.c index 9ffe1a9142c..de433cf9fb5 100644 --- a/arch/mips/ddb5xxx/ddb5477/irq.c +++ b/arch/mips/ddb5xxx/ddb5477/irq.c @@ -75,7 +75,6 @@ set_pci_int_attr(u32 pci, u32 intn, u32 active, u32 trigger) extern void vrc5477_irq_init(u32 base); extern void mips_cpu_irq_init(u32 base); -extern asmlinkage void ddb5477_handle_int(void); extern int setup_irq(unsigned int irq, struct irqaction *irqaction); static struct irqaction irq_cascade = { no_action, 0, CPU_MASK_NONE, "cascade", NULL, NULL }; @@ -135,9 +134,6 @@ void __init arch_init_irq(void) /* setup cascade interrupts */ setup_irq(VRC5477_IRQ_BASE + VRC5477_I8259_CASCADE, &irq_cascade); setup_irq(CPU_IRQ_BASE + CPU_VRC5477_CASCADE, &irq_cascade); - - /* hook up the first-level interrupt handler */ - set_except_vector(0, ddb5477_handle_int); } u8 i8259_interrupt_ack(void) @@ -159,7 +155,7 @@ u8 i8259_interrupt_ack(void) * the first level int-handler will jump here if it is a vrc5477 irq */ #define NUM_5477_IRQS 32 -asmlinkage void +static void vrc5477_irq_dispatch(struct pt_regs *regs) { u32 intStatus; @@ -197,3 +193,21 @@ vrc5477_irq_dispatch(struct pt_regs *regs) } } } + +#define VR5477INTS (STATUSF_IP2|STATUSF_IP3|STATUSF_IP4|STATUSF_IP5|STATUSF_IP6) + +asmlinkage void plat_irq_dispatch(struct pt_regs *regs) +{ + unsigned int pending = read_c0_cause() & read_c0_status(); + + if (pending & STATUSF_IP7) + do_IRQ(CPU_IRQ_BASE + 7, regs); + else if (pending & VR5477INTS) + vrc5477_irq_dispatch(regs); + else if (pending & STATUSF_IP0) + do_IRQ(CPU_IRQ_BASE, regs); + else if (pending & STATUSF_IP1) + do_IRQ(CPU_IRQ_BASE + 1, regs); + else + spurious_interrupt(regs); +} diff --git a/arch/mips/dec/int-handler.S b/arch/mips/dec/int-handler.S index 5bafd585ac3..e8ec93e33fe 100644 --- a/arch/mips/dec/int-handler.S +++ b/arch/mips/dec/int-handler.S @@ -36,7 +36,7 @@ .text .set noreorder /* - * decstation_handle_int: Interrupt handler for DECstations + * plat_irq_dispatch: Interrupt handler for DECstations * * We follow the model in the Indy interrupt code by David Miller, where he * says: a lot of complication here is taken away because: @@ -125,11 +125,7 @@ * just take another exception, big deal. */ .align 5 - NESTED(decstation_handle_int, PT_SIZE, ra) - .set noat - SAVE_ALL - CLI # TEST: interrupts should be off - .set at + NESTED(plat_irq_dispatch, PT_SIZE, ra) .set noreorder /* @@ -286,7 +282,7 @@ spurious: nop j ret_from_irq nop - END(decstation_handle_int) + END(plat_irq_dispatch) /* * Generic unimplemented interrupt routines -- cpu_mask_nr_tbl diff --git a/arch/mips/dec/setup.c b/arch/mips/dec/setup.c index 7c1ca8f6330..ad5d436d80c 100644 --- a/arch/mips/dec/setup.c +++ b/arch/mips/dec/setup.c @@ -48,8 +48,6 @@ extern void dec_machine_halt(void); extern void dec_machine_power_off(void); extern irqreturn_t dec_intr_halt(int irq, void *dev_id, struct pt_regs *regs); -extern asmlinkage void decstation_handle_int(void); - unsigned long dec_kn_slot_base, dec_kn_slot_size; EXPORT_SYMBOL(dec_kn_slot_base); @@ -744,7 +742,6 @@ void __init arch_init_irq(void) panic("Don't know how to set this up!"); break; } - set_except_vector(0, decstation_handle_int); /* Free the FPU interrupt if the exception is present. */ if (!cpu_has_nofpuex) { diff --git a/arch/mips/galileo-boards/ev96100/Makefile b/arch/mips/galileo-boards/ev96100/Makefile index 58c02f9db69..cd868ec78cb 100644 --- a/arch/mips/galileo-boards/ev96100/Makefile +++ b/arch/mips/galileo-boards/ev96100/Makefile @@ -6,4 +6,4 @@ # Makefile for the Galileo EV96100 board. # -obj-y += init.o irq.o puts.o reset.o time.o int-handler.o setup.o +obj-y += init.o irq.o puts.o reset.o time.o setup.o diff --git a/arch/mips/galileo-boards/ev96100/int-handler.S b/arch/mips/galileo-boards/ev96100/int-handler.S deleted file mode 100644 index 0edf1fec290..00000000000 --- a/arch/mips/galileo-boards/ev96100/int-handler.S +++ /dev/null @@ -1,34 +0,0 @@ -#include -#include -#include -#include - - .set noat - .align 5 - -NESTED(ev96100IRQ, PT_SIZE, sp) - SAVE_ALL - CLI # Important: mark KERNEL mode ! - - mfc0 t0, CP0_CAUSE # get pending interrupts - mfc0 t1, CP0_STATUS # get enabled interrupts - and t0, t1 # isolate allowed ones - - # FIX ME add R7000 extensions - andi t0,0xff00 # isolate pending bits - andi a0, t0, CAUSEF_IP7 - beq a0, zero, 1f - move a0, sp - jal mips_timer_interrupt - j ret_from_irq - -1: beqz t0, 3f # spurious interrupt - - move a0, t0 - move a1, sp - jal ev96100_cpu_irq - j ret_from_irq - -3: jal spurious_interrupt - j ret_from_irq - END(ev96100IRQ) diff --git a/arch/mips/galileo-boards/ev96100/irq.c b/arch/mips/galileo-boards/ev96100/irq.c index 383801dd1b9..ee5d6720f23 100644 --- a/arch/mips/galileo-boards/ev96100/irq.c +++ b/arch/mips/galileo-boards/ev96100/irq.c @@ -40,8 +40,6 @@ #include #include -extern asmlinkage void ev96100IRQ(void); - static inline unsigned int ffz8(unsigned int word) { unsigned long k; @@ -54,13 +52,26 @@ static inline unsigned int ffz8(unsigned int word) return k; } +extern void mips_timer_interrupt(struct pt_regs *regs); + asmlinkage void ev96100_cpu_irq(unsigned int pending, struct pt_regs *regs) { do_IRQ(ffz8(pending >> 8), regs); } +asmlinkage void plat_irq_dispatch(struct pt_regs *regs) +{ + unsigned int pending = read_c0_cause() & read_c0_status() & ST0_IM; + + if (pending & CAUSEF_IP7) + mips_timer_interrupt(regs); + else if (pending) + ev96100_cpu_irq(pending, regs); + else + spurious_interrupt(regs); +} + void __init arch_init_irq(void) { - set_except_vector(0, ev96100IRQ); mips_cpu_irq_init(0); } diff --git a/arch/mips/gt64120/ev64120/Makefile b/arch/mips/gt64120/ev64120/Makefile index ebe91c57e17..b2c53a8f871 100644 --- a/arch/mips/gt64120/ev64120/Makefile +++ b/arch/mips/gt64120/ev64120/Makefile @@ -6,6 +6,6 @@ # Makefile for the Galileo EV64120 board. # -obj-y += int-handler.o irq.o promcon.o reset.o serialGT.o setup.o +obj-y += irq.o promcon.o reset.o serialGT.o setup.o EXTRA_AFLAGS := $(CFLAGS) diff --git a/arch/mips/gt64120/ev64120/int-handler.S b/arch/mips/gt64120/ev64120/int-handler.S deleted file mode 100644 index 9dda5b44952..00000000000 --- a/arch/mips/gt64120/ev64120/int-handler.S +++ /dev/null @@ -1,114 +0,0 @@ -/* - * int-handler.S - * - * Based on the cobalt handler. - */ -#include -#include -#include -#include -#include - -/* - * galileo_handle_int - - * We check for the timer first, then check PCI ints A and D. - * Then check for serial IRQ and fall through. - */ - .align 5 - .set reorder - .set noat - NESTED(galileo_handle_int, PT_SIZE, sp) - SAVE_ALL - CLI - .set at - mfc0 t0,CP0_CAUSE - mfc0 t2,CP0_STATUS - - and t0,t2 - - andi t1,t0,STATUSF_IP4 /* int2 hardware line (timer) */ - bnez t1,ll_gt64120_irq - andi t1,t0,STATUSF_IP2 /* int0 hardware line */ - bnez t1,ll_pci_intA - andi t1,t0,STATUSF_IP5 /* int3 hardware line */ - bnez t1,ll_pci_intD - andi t1,t0,STATUSF_IP6 /* int4 hardware line */ - bnez t1,ll_serial_irq - andi t1,t0,STATUSF_IP7 /* compare int */ - bnez t1,ll_compare_irq - nop - - /* wrong alarm or masked ... */ - jal spurious_interrupt - nop - j ret_from_irq - END(galileo_handle_int) - - - .align 5 - .set reorder -ll_gt64120_irq: - li a0,4 - move a1,sp - jal do_IRQ - nop - j ret_from_irq - nop - - .align 5 - .set reorder -ll_compare_irq: - li a0,7 - move a1,sp - jal do_IRQ - nop - j ret_from_irq - nop - - .align 5 - .set reorder -ll_pci_intA: - move a0,sp - jal pci_intA - nop - j ret_from_irq - nop - -#if 0 - .align 5 - .set reorder -ll_pci_intB: - move a0,sp - jal pci_intB - nop - j ret_from_irq - nop - - .align 5 - .set reorder -ll_pci_intC: - move a0,sp - jal pci_intC - nop - j ret_from_irq - nop -#endif - - .align 5 - .set reorder -ll_pci_intD: - move a0,sp - jal pci_intD - nop - j ret_from_irq - nop - - .align 5 - .set reorder -ll_serial_irq: - li a0,6 - move a1,sp - jal do_IRQ - nop - j ret_from_irq - nop diff --git a/arch/mips/gt64120/ev64120/irq.c b/arch/mips/gt64120/ev64120/irq.c index 3b186159b21..46c468b26b3 100644 --- a/arch/mips/gt64120/ev64120/irq.c +++ b/arch/mips/gt64120/ev64120/irq.c @@ -46,14 +46,22 @@ #include #include -asmlinkage inline void pci_intA(struct pt_regs *regs) +asmlinkage void plat_irq_dispatch(struct pt_regs *regs) { - do_IRQ(GT_INTA, regs); -} - -asmlinkage inline void pci_intD(struct pt_regs *regs) -{ - do_IRQ(GT_INTD, regs); + unsigned int pending = read_c0_status() & read_c0_cause(); + + if (pending & STATUSF_IP4) /* int2 hardware line (timer) */ + do_IRQ(4, regs); + else if (pending & STATUSF_IP2) /* int0 hardware line */ + do_IRQ(GT_INTA, regs); + else if (pending & STATUSF_IP5) /* int3 hardware line */ + do_IRQ(GT_INTD, regs); + else if (pending & STATUSF_IP6) /* int4 hardware line */ + do_IRQ(6, regs); + else if (pending & STATUSF_IP7) /* compare int */ + do_IRQ(7, regs); + else + spurious_interrupt(regs); } static void disable_ev64120_irq(unsigned int irq_nr) @@ -109,16 +117,11 @@ static struct hw_interrupt_type ev64120_irq_type = { void gt64120_irq_setup(void) { - extern asmlinkage void galileo_handle_int(void); - /* * Clear all of the interrupts while we change the able around a bit. */ clear_c0_status(ST0_IM); - /* Sets the exception_handler array. */ - set_except_vector(0, galileo_handle_int); - local_irq_disable(); /* diff --git a/arch/mips/gt64120/momenco_ocelot/Makefile b/arch/mips/gt64120/momenco_ocelot/Makefile index 7b59c6567c7..6f708df8373 100644 --- a/arch/mips/gt64120/momenco_ocelot/Makefile +++ b/arch/mips/gt64120/momenco_ocelot/Makefile @@ -2,7 +2,7 @@ # Makefile for Momentum's Ocelot board. # -obj-y += int-handler.o irq.o prom.o reset.o setup.o +obj-y += irq.o prom.o reset.o setup.o obj-$(CONFIG_KGDB) += dbg_io.o diff --git a/arch/mips/gt64120/momenco_ocelot/int-handler.S b/arch/mips/gt64120/momenco_ocelot/int-handler.S deleted file mode 100644 index 808acef248c..00000000000 --- a/arch/mips/gt64120/momenco_ocelot/int-handler.S +++ /dev/null @@ -1,131 +0,0 @@ -/* - * Copyright 2001 MontaVista Software Inc. - * Author: jsun@mvista.com or jsun@junsun.net - * - * First-level interrupt dispatcher for ocelot board. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - */ -#include -#include -#include -#include -#include - -/* - * first level interrupt dispatcher for ocelot board - - * We check for the timer first, then check PCI ints A and D. - * Then check for serial IRQ and fall through. - */ - .align 5 - NESTED(ocelot_handle_int, PT_SIZE, sp) - SAVE_ALL - CLI - .set at - mfc0 t0, CP0_CAUSE - mfc0 t2, CP0_STATUS - - and t0, t2 - - andi t1, t0, STATUSF_IP2 /* int0 hardware line */ - bnez t1, ll_pri_enet_irq - andi t1, t0, STATUSF_IP3 /* int1 hardware line */ - bnez t1, ll_sec_enet_irq - andi t1, t0, STATUSF_IP4 /* int2 hardware line */ - bnez t1, ll_uart1_irq - andi t1, t0, STATUSF_IP5 /* int3 hardware line */ - bnez t1, ll_cpci_irq - andi t1, t0, STATUSF_IP6 /* int4 hardware line */ - bnez t1, ll_galileo_irq - andi t1, t0, STATUSF_IP7 /* cpu timer */ - bnez t1, ll_cputimer_irq - - /* now look at the extended interrupts */ - mfc0 t0, CP0_CAUSE - cfc0 t1, CP0_S1_INTCONTROL - - /* shift the mask 8 bits left to line up the bits */ - sll t2, t1, 8 - - and t0, t2 - srl t0, t0, 16 - - andi t1, t0, STATUSF_IP8 /* int6 hardware line */ - bnez t1, ll_pmc1_irq - andi t1, t0, STATUSF_IP9 /* int7 hardware line */ - bnez t1, ll_pmc2_irq - andi t1, t0, STATUSF_IP10 /* int8 hardware line */ - bnez t1, ll_cpci_abcd_irq - andi t1, t0, STATUSF_IP11 /* int9 hardware line */ - bnez t1, ll_uart2_irq - - .set reorder - - /* wrong alarm or masked ... */ - j spurious_interrupt - nop - END(ocelot_handle_int) - - .align 5 -ll_pri_enet_irq: - li a0, 2 - move a1, sp - jal do_IRQ - j ret_from_irq - -ll_sec_enet_irq: - li a0, 3 - move a1, sp - jal do_IRQ - j ret_from_irq - -ll_uart1_irq: - li a0, 4 - move a1, sp - jal do_IRQ - j ret_from_irq - -ll_cpci_irq: - li a0, 5 - move a1, sp - jal do_IRQ - j ret_from_irq - -ll_galileo_irq: - li a0, 6 - move a1, sp - jal do_IRQ - j ret_from_irq - -ll_cputimer_irq: - li a0, 7 - move a1, sp - jal do_IRQ - j ret_from_irq - -ll_pmc1_irq: - li a0, 8 - move a1, sp - jal do_IRQ - j ret_from_irq - -ll_pmc2_irq: - li a0, 9 - move a1, sp - jal do_IRQ - j ret_from_irq - -ll_cpci_abcd_irq: - li a0, 10 - move a1, sp - jal do_IRQ - j ret_from_irq - -ll_uart2_irq: - li a0, 11 - move a1, sp - jal do_IRQ - j ret_from_irq diff --git a/arch/mips/gt64120/momenco_ocelot/irq.c b/arch/mips/gt64120/momenco_ocelot/irq.c index 4f108da71b2..885f67f32ea 100644 --- a/arch/mips/gt64120/momenco_ocelot/irq.c +++ b/arch/mips/gt64120/momenco_ocelot/irq.c @@ -48,7 +48,38 @@ #include #include -extern asmlinkage void ocelot_handle_int(void); +asmlinkage void plat_irq_dispatch(struct pt_regs *regs) +{ + unsigned int pending = read_c0_status() & read_c0_cause(); + + if (pending & STATUSF_IP2) /* int0 hardware line */ + do_IRQ(2, regs); + else if (pending & STATUSF_IP3) /* int1 hardware line */ + do_IRQ(3, regs); + else if (pending & STATUSF_IP4) /* int2 hardware line */ + do_IRQ(4, regs); + else if (pending & STATUSF_IP5) /* int3 hardware line */ + do_IRQ(5, regs); + else if (pending & STATUSF_IP6) /* int4 hardware line */ + do_IRQ(6, regs); + else if (pending & STATUSF_IP7) /* cpu timer */ + do_IRQ(7, regs); + else { + /* + * Now look at the extended interrupts + */ + pending = (read_c0_cause() & (read_c0_intcontrol() << 8)) >> 16; + + if (pending & STATUSF_IP8) /* int6 hardware line */ + do_IRQ(8, regs); + else if (pending & STATUSF_IP9) /* int7 hardware line */ + do_IRQ(9, regs); + else if (pending & STATUSF_IP10) /* int8 hardware line */ + do_IRQ(10, regs); + else if (pending & STATUSF_IP11) /* int9 hardware line */ + do_IRQ(11, regs); + } +} void __init arch_init_irq(void) { @@ -59,9 +90,6 @@ void __init arch_init_irq(void) clear_c0_status(ST0_IM); local_irq_disable(); - /* Sets the first-level interrupt dispatcher. */ - set_except_vector(0, ocelot_handle_int); - mips_cpu_irq_init(0); rm7k_cpu_irq_init(8); } diff --git a/arch/mips/ite-boards/generic/Makefile b/arch/mips/ite-boards/generic/Makefile index 0e7853f4398..63431538d0e 100644 --- a/arch/mips/ite-boards/generic/Makefile +++ b/arch/mips/ite-boards/generic/Makefile @@ -6,7 +6,7 @@ # Makefile for the ITE 8172 (qed-4n-s01b) board, generic files. # -obj-y += it8172_setup.o irq.o int-handler.o pmon_prom.o \ +obj-y += it8172_setup.o irq.o pmon_prom.o \ time.o lpc.o puts.o reset.o obj-$(CONFIG_IT8172_CIR)+= it8172_cir.o diff --git a/arch/mips/ite-boards/generic/int-handler.S b/arch/mips/ite-boards/generic/int-handler.S deleted file mode 100644 index d190d8add9c..00000000000 --- a/arch/mips/ite-boards/generic/int-handler.S +++ /dev/null @@ -1,63 +0,0 @@ -#include -#include -#include -#include - - .text - .set macro - .set noat - .align 5 - -NESTED(it8172_IRQ, PT_SIZE, sp) - SAVE_ALL - CLI # Important: mark KERNEL mode ! - - /* We're working with 'reorder' set at this point. */ - /* - * Get pending interrupts - */ - - mfc0 t0,CP0_CAUSE # get pending interrupts - mfc0 t1,CP0_STATUS # get enabled interrupts - and t0,t1 # isolate allowed ones - - andi t0,0xff00 # isolate pending bits - beqz t0, 3f # spurious interrupt - - andi a0, t0, CAUSEF_IP7 - beq a0, zero, 1f - - li a0, 127 # MIPS_CPU_TIMER_IRQ = (NR_IRQS-1) - move a1, sp - jal ll_timer_interrupt - j ret_from_irq - nop - -1: - andi a0, t0, CAUSEF_IP2 # the only int we expect at this time - beq a0, zero, 3f - move a0,sp - jal it8172_hw0_irqdispatch - - mfc0 t0,CP0_STATUS # disable interrupts - ori t0,1 - xori t0,1 - mtc0 t0,CP0_STATUS - nop - nop - nop - - la a1, ret_from_irq - jr a1 - nop - -3: - move a0, sp - jal mips_spurious_interrupt - nop - la a1, ret_from_irq - jr a1 - nop - -END(it8172_IRQ) - diff --git a/arch/mips/ite-boards/generic/irq.c b/arch/mips/ite-boards/generic/irq.c index 8c1cdfcd428..77be7216bdd 100644 --- a/arch/mips/ite-boards/generic/irq.c +++ b/arch/mips/ite-boards/generic/irq.c @@ -64,7 +64,6 @@ extern void set_debug_traps(void); extern void mips_timer_interrupt(int irq, struct pt_regs *regs); -extern asmlinkage void it8172_IRQ(void); struct it8172_intc_regs volatile *it8172_hw0_icregs = (struct it8172_intc_regs volatile *)(KSEG1ADDR(IT8172_PCI_IO_BASE + IT_INTC_BASE)); @@ -178,8 +177,6 @@ void __init arch_init_irq(void) int i; unsigned long flags; - set_except_vector(0, it8172_IRQ); - /* mask all interrupts */ it8172_hw0_icregs->lb_mask = 0xffff; it8172_hw0_icregs->lpc_mask = 0xffff; @@ -279,6 +276,18 @@ void it8172_hw0_irqdispatch(struct pt_regs *regs) do_IRQ(irq, regs); } +asmlinkage void plat_irq_dispatch(struct pt_regs *regs) +{ + unsigned int pending = read_c0_cause() & read_c0_status() & ST0_IM; + + if (!pending) + mips_spurious_interrupt(regs); + else if (pending & CAUSEF_IP7) + ll_timer_interrupt(127, regs); + else if (pending & CAUSEF_IP2) + it8172_hw0_irqdispatch(regs); +} + void show_pending_irqs(void) { fputs("intstatus: "); diff --git a/arch/mips/jazz/Makefile b/arch/mips/jazz/Makefile index 85749246a67..02bd39add89 100644 --- a/arch/mips/jazz/Makefile +++ b/arch/mips/jazz/Makefile @@ -2,6 +2,6 @@ # Makefile for the Jazz family specific parts of the kernel # -obj-y := int-handler.o irq.o jazzdma.o reset.o setup.o +obj-y := irq.o jazzdma.o reset.o setup.o EXTRA_AFLAGS := $(CFLAGS) diff --git a/arch/mips/jazz/int-handler.S b/arch/mips/jazz/int-handler.S deleted file mode 100644 index e35f5fcd3f9..00000000000 --- a/arch/mips/jazz/int-handler.S +++ /dev/null @@ -1,283 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 1995, 1996, 1997, 1998 by Ralf Baechle and Andreas Busse - * - * Jazz family specific interrupt stuff - * - * To do: On Jazz machines we remap some non-ISA interrupts to ISA - * interrupts. These interrupts should use their own vectors. - * Squeeze the last cycles out of the handlers. Only a dead - * cycle is a good cycle. - */ -#include -#include -#include -#include -#include - -/* - * jazz_handle_int: Interrupt handler for the ACER Pica-61 boards - */ - .set noreorder - - NESTED(jazz_handle_int, PT_SIZE, ra) - .set noat - SAVE_ALL - CLI - .set at - - /* - * Get pending interrupts - */ - mfc0 t0,CP0_CAUSE # get pending interrupts - mfc0 t1,CP0_STATUS # get enabled interrupts - and t0,t1 # isolate allowed ones - andi t0,0xff00 # isolate pending bits - beqz t0,3f - sll t0,16 # delay slot - - /* - * Find irq with highest priority - * FIXME: This is slow - use binary search - */ - la t1,ll_vectors -1: bltz t0,2f # found pending irq - sll t0,1 - b 1b - subu t1,PTRSIZE # delay slot - - /* - * Do the low-level stuff - */ -2: lw t0,(t1) - jr t0 - nop # delay slot - END(jazz_handle_int) - -ll_sw0: li s1,~IE_SW0 - mfc0 t0,CP0_CAUSE - and t0,s1 - mtc0 t0,CP0_CAUSE - PANIC("Unimplemented sw0 handler") - -ll_sw1: li s1,~IE_SW1 - mfc0 t0,CP0_CAUSE - and t0,s1 - mtc0 t0,CP0_CAUSE - PANIC("Unimplemented sw1 handler") - -ll_local_dma: li s1,~IE_IRQ0 - PANIC("Unimplemented local_dma handler") - -ll_local_dev: lbu t0,JAZZ_IO_IRQ_SOURCE -#if PTRSIZE == 8 /* True 64 bit kernel */ - dsll t0,1 -#endif - .set reorder - LONG_L t0,local_vector(t0) - jr t0 - .set noreorder - -/* - * The braindead PICA hardware gives us no way to distinguish if we really - * received interrupt 7 from the (E)ISA bus or if we just received an - * interrupt with no findable cause. This sometimes happens with braindead - * cards. Oh well - for all the Jazz boxes slots are more or less just - * whistles and bells and we're aware of the problem. - */ -ll_isa_irq: lw a0, JAZZ_EISA_IRQ_ACK - - jal do_IRQ - move a1,sp - - j ret_from_irq - nop - -/* - * Hmm... This is not just a plain PC clone so the question is - * which devices on Jazz machines can generate an (E)ISA NMI? - * (Writing to nonexistent memory?) - */ -ll_isa_nmi: li s1,~IE_IRQ3 - PANIC("Unimplemented isa_nmi handler") - -/* - * Timer IRQ - remapped to be more similar to an IBM compatible. - * - * The timer interrupt is handled specially to ensure that the jiffies - * variable is updated at all times. Specifically, the timer interrupt is - * just like the complete handlers except that it is invoked with interrupts - * disabled and should never re-enable them. If other interrupts were - * allowed to be processed while the timer interrupt is active, then the - * other interrupts would have to avoid using the jiffies variable for delay - * and interval timing operations to avoid hanging the system. - */ -ll_timer: lw zero,JAZZ_TIMER_REGISTER # timer irq cleared on read - li s1,~IE_IRQ4 - - li a0, JAZZ_TIMER_IRQ - jal do_IRQ - move a1,sp - - mfc0 t0,CP0_STATUS # disable interrupts again - ori t0,1 - xori t0,1 - mtc0 t0,CP0_STATUS - - j ret_from_irq - nop - -/* - * CPU count/compare IRQ (unused) - */ -ll_count: j ret_from_irq - mtc0 zero,CP0_COMPARE - -#if 0 -/* - * Call the handler for the interrupt - * (Currently unused) - */ -call_real: /* - * temporarily disable interrupt - */ - mfc0 t2,CP0_STATUS - and t2,s1 - mtc0 t2,CP0_STATUS - nor s1,zero,s1 - jal do_IRQ - - /* - * reenable interrupt - */ - mfc0 t2,CP0_STATUS - or t2,s1 - mtc0 t2,CP0_STATUS - j ret_from_irq -#endif - - .data - PTR ll_sw0 # SW0 - PTR ll_sw1 # SW1 - PTR ll_local_dma # Local DMA - PTR ll_local_dev # Local devices - PTR ll_isa_irq # ISA IRQ - PTR ll_isa_nmi # ISA NMI - PTR ll_timer # Timer -ll_vectors: PTR ll_count # Count/Compare IRQ - - /* - * Interrupt handlers for local devices. - */ - .text - .set reorder -loc_no_irq: PANIC("Unimplemented loc_no_irq handler") -/* - * Parallel port IRQ - */ -loc_parallel: li s1,~JAZZ_IE_PARALLEL - li a0,JAZZ_PARALLEL_IRQ - b loc_call - -/* - * Floppy IRQ - */ -loc_floppy: li s1,~JAZZ_IE_FLOPPY - li a0,JAZZ_FLOPPY_IRQ - b loc_call - -/* - * Sound IRQ - */ -loc_sound: PANIC("Unimplemented loc_sound handler") -loc_video: PANIC("Unimplemented loc_video handler") - -/* - * Ethernet interrupt handler - */ -loc_ethernet: li s1,~JAZZ_IE_ETHERNET - li a0,JAZZ_ETHERNET_IRQ - b loc_call - -/* - * SCSI interrupt handler - */ -loc_scsi: li s1,~JAZZ_IE_SCSI - li a0,JAZZ_SCSI_IRQ - b loc_call - -/* - * Keyboard interrupt handler - */ -loc_keyboard: li s1,~JAZZ_IE_KEYBOARD - li a0,JAZZ_KEYBOARD_IRQ - b loc_call - -/* - * Mouse interrupt handler - */ -loc_mouse: li s1,~JAZZ_IE_MOUSE - li a0,JAZZ_MOUSE_IRQ - b loc_call - -/* - * Serial port 1 IRQ - */ -loc_serial1: li s1,~JAZZ_IE_SERIAL1 - li a0,JAZZ_SERIAL1_IRQ - b loc_call - -/* - * Serial port 2 IRQ - */ -loc_serial2: li s1,~JAZZ_IE_SERIAL2 - li a0,JAZZ_SERIAL2_IRQ - b loc_call - -/* - * Call the interrupt handler for an interrupt generated by a - * local device. - */ -loc_call: /* - * Temporarily disable interrupt source - */ - lhu t2,JAZZ_IO_IRQ_ENABLE - and t2,s1 - sh t2,JAZZ_IO_IRQ_ENABLE - - nor s1,zero,s1 - jal do_IRQ - - /* - * Reenable interrupt - */ - lhu t2,JAZZ_IO_IRQ_ENABLE - or t2,s1 - sh t2,JAZZ_IO_IRQ_ENABLE - - j ret_from_irq - -/* - * "Jump extender" to reach spurious_interrupt - */ -3: jal spurious_interrupt - j ret_from_irq - -/* - * Vectors for interrupts generated by local devices - */ - .data -local_vector: PTR loc_no_irq - PTR loc_parallel - PTR loc_floppy - PTR loc_sound - PTR loc_video - PTR loc_ethernet - PTR loc_scsi - PTR loc_keyboard - PTR loc_mouse - PTR loc_serial1 - PTR loc_serial2 diff --git a/arch/mips/jazz/irq.c b/arch/mips/jazz/irq.c index b309b1bcf2e..becc9accd49 100644 --- a/arch/mips/jazz/irq.c +++ b/arch/mips/jazz/irq.c @@ -15,8 +15,6 @@ #include #include -extern asmlinkage void jazz_handle_int(void); - static DEFINE_SPINLOCK(r4030_lock); static void enable_r4030_irq(unsigned int irq) @@ -90,10 +88,82 @@ void __init init_r4030_ints(void) */ void __init arch_init_irq(void) { - set_except_vector(0, jazz_handle_int); - init_i8259_irqs(); /* Integrated i8259 */ init_r4030_ints(); change_c0_status(ST0_IM, IE_IRQ4 | IE_IRQ3 | IE_IRQ2 | IE_IRQ1); } + +static void loc_call(unsigned int irq, struct pt_regs *regs, unsigned int mask) +{ + r4030_write_reg16(JAZZ_IO_IRQ_ENABLE, + r4030_read_reg16(JAZZ_IO_IRQ_ENABLE) & mask); + do_IRQ(irq, regs); + r4030_write_reg16(JAZZ_IO_IRQ_ENABLE, + r4030_read_reg16(JAZZ_IO_IRQ_ENABLE) | mask); +} + +static void ll_local_dev(struct pt_regs *regs) +{ + switch (r4030_read_reg32(JAZZ_IO_IRQ_SOURCE)) { + case 0: + panic("Unimplemented loc_no_irq handler"); + break; + case 4: + loc_call(JAZZ_PARALLEL_IRQ, regs, JAZZ_IE_PARALLEL); + break; + case 8: + loc_call(JAZZ_PARALLEL_IRQ, regs, JAZZ_IE_FLOPPY); + break; + case 12: + panic("Unimplemented loc_sound handler"); + break; + case 16: + panic("Unimplemented loc_video handler"); + break; + case 20: + loc_call(JAZZ_ETHERNET_IRQ, regs, JAZZ_IE_ETHERNET); + break; + case 24: + loc_call(JAZZ_SCSI_IRQ, regs, JAZZ_IE_SCSI); + break; + case 28: + loc_call(JAZZ_KEYBOARD_IRQ, regs, JAZZ_IE_KEYBOARD); + break; + case 32: + loc_call(JAZZ_MOUSE_IRQ, regs, JAZZ_IE_MOUSE); + break; + case 36: + loc_call(JAZZ_SERIAL1_IRQ, regs, JAZZ_IE_SERIAL1); + break; + case 40: + loc_call(JAZZ_SERIAL2_IRQ, regs, JAZZ_IE_SERIAL2); + break; + } +} + +asmlinkage void plat_irq_dispatch(struct pt_regs *regs) +{ + unsigned int pending = read_c0_cause() & read_c0_status() & ST0_IM; + + if (pending & IE_IRQ5) + write_c0_compare(0); + else if (pending & IE_IRQ4) { + r4030_read_reg32(JAZZ_TIMER_REGISTER); + do_IRQ(JAZZ_TIMER_IRQ, regs); + } else if (pending & IE_IRQ3) + panic("Unimplemented ISA NMI handler"); + else if (pending & IE_IRQ2) + do_IRQ(r4030_read_reg32(JAZZ_EISA_IRQ_ACK), regs); + else if (pending & IE_IRQ1) { + ll_local_dev(regs); + } else if (unlikely(pending & IE_IRQ0)) + panic("Unimplemented local_dma handler"); + else if (pending & IE_SW1) { + clear_c0_cause(IE_SW1); + panic("Unimplemented sw1 handler"); + } else if (pending & IE_SW0) { + clear_c0_cause(IE_SW0); + panic("Unimplemented sw0 handler"); + } +} diff --git a/arch/mips/jmr3927/rbhma3100/Makefile b/arch/mips/jmr3927/rbhma3100/Makefile index 75bf418b94c..baf5077813c 100644 --- a/arch/mips/jmr3927/rbhma3100/Makefile +++ b/arch/mips/jmr3927/rbhma3100/Makefile @@ -2,7 +2,7 @@ # Makefile for TOSHIBA JMR-TX3927 board # -obj-y += init.o int-handler.o irq.o setup.o +obj-y += init.o irq.o setup.o obj-$(CONFIG_RUNTIME_DEBUG) += debug.o obj-$(CONFIG_KGDB) += kgdb_io.o diff --git a/arch/mips/jmr3927/rbhma3100/int-handler.S b/arch/mips/jmr3927/rbhma3100/int-handler.S deleted file mode 100644 index f85bbf40754..00000000000 --- a/arch/mips/jmr3927/rbhma3100/int-handler.S +++ /dev/null @@ -1,74 +0,0 @@ -/* - * Copyright 2001 MontaVista Software Inc. - * Author: MontaVista Software, Inc. - * ahennessy@mvista.com - * - * Based on arch/mips/tsdb/kernel/int-handler.S - * - * Copyright (C) 2000-2001 Toshiba Corporation - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN - * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF - * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON - * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF - * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 675 Mass Ave, Cambridge, MA 02139, USA. - */ - -#include -#include -#include -#include -#include - - /* A lot of complication here is taken away because: - * - * 1) We handle one interrupt and return, sitting in a loop - * and moving across all the pending IRQ bits in the cause - * register is _NOT_ the answer, the common case is one - * pending IRQ so optimize in that direction. - * - * 2) We need not check against bits in the status register - * IRQ mask, that would make this routine slow as hell. - * - * 3) Linux only thinks in terms of all IRQs on or all IRQs - * off, nothing in between like BSD spl() brain-damage. - * - */ - -/* Flush write buffer (needed?) - * NOTE: TX39xx performs "non-blocking load", so explicitly use the target - * register of LBU to flush immediately. - */ -#define FLUSH_WB(tmp) \ - la tmp, JMR3927_IOC_REV_ADDR; \ - lbu tmp, (tmp); \ - move tmp, zero; - - .text - .set noreorder - .set noat - .align 5 - NESTED(jmr3927_IRQ, PT_SIZE, sp) - SAVE_ALL - CLI - .set at - jal jmr3927_irc_irqdispatch - move a0, sp - FLUSH_WB(t0) - j ret_from_irq - nop - END(jmr3927_IRQ) diff --git a/arch/mips/jmr3927/rbhma3100/irq.c b/arch/mips/jmr3927/rbhma3100/irq.c index 2810727f1d4..11304d1354f 100644 --- a/arch/mips/jmr3927/rbhma3100/irq.c +++ b/arch/mips/jmr3927/rbhma3100/irq.c @@ -77,8 +77,6 @@ static int jmr3927_gen_iack(void) } #endif -extern asmlinkage void jmr3927_IRQ(void); - #define irc_dlevel 0 #define irc_elevel 1 @@ -262,7 +260,7 @@ void jmr3927_spurious(struct pt_regs *regs) regs->cp0_cause, regs->cp0_epc, regs->regs[31]); } -void jmr3927_irc_irqdispatch(struct pt_regs *regs) +asmlinkage void plat_irq_dispatch(struct pt_regs *regs) { int irq; @@ -398,8 +396,6 @@ void __init arch_init_irq(void) jmr3927_irq_init(NR_ISA_IRQS); - set_except_vector(0, jmr3927_IRQ); - /* setup irq space */ add_tb_irq_space(&jmr3927_isac_irqspace); add_tb_irq_space(&jmr3927_ioc_irqspace); diff --git a/arch/mips/kernel/genex.S b/arch/mips/kernel/genex.S index 13f22d1d0e8..04418b6568b 100644 --- a/arch/mips/kernel/genex.S +++ b/arch/mips/kernel/genex.S @@ -122,6 +122,20 @@ handle_vcei: .set pop END(except_vec3_r4000) + __FINIT + + .align 5 +NESTED(handle_int, PT_SIZE, sp) + SAVE_ALL + CLI + + PTR_LA ra, ret_from_irq + move a0, sp + j plat_irq_dispatch + END(handle_int) + + __INIT + /* * Special interrupt vector for MIPS64 ISA & embedded MIPS processors. * This is a dedicated interrupt exception vector which reduces the diff --git a/arch/mips/kernel/traps.c b/arch/mips/kernel/traps.c index 85731908525..61efc61c45e 100644 --- a/arch/mips/kernel/traps.c +++ b/arch/mips/kernel/traps.c @@ -42,6 +42,7 @@ #include #include +extern asmlinkage void handle_int(void); extern asmlinkage void handle_tlbm(void); extern asmlinkage void handle_tlbl(void); extern asmlinkage void handle_tlbs(void); @@ -1296,6 +1297,7 @@ void __init trap_init(void) if (board_be_init) board_be_init(); + set_except_vector(0, handle_int); set_except_vector(1, handle_tlbm); set_except_vector(2, handle_tlbl); set_except_vector(3, handle_tlbs); diff --git a/arch/mips/lasat/Makefile b/arch/mips/lasat/Makefile index 0d5aec43672..99f5046fdf4 100644 --- a/arch/mips/lasat/Makefile +++ b/arch/mips/lasat/Makefile @@ -3,7 +3,7 @@ # obj-y += reset.o setup.o prom.o lasat_board.o \ - at93c.o interrupt.o lasatIRQ.o + at93c.o interrupt.o obj-$(CONFIG_LASAT_SYSCTL) += sysctl.o obj-$(CONFIG_DS1603) += ds1603.o diff --git a/arch/mips/lasat/interrupt.c b/arch/mips/lasat/interrupt.c index 852a41901a5..2d3472b21eb 100644 --- a/arch/mips/lasat/interrupt.c +++ b/arch/mips/lasat/interrupt.c @@ -27,14 +27,13 @@ #include #include #include +#include #include static volatile int *lasat_int_status = NULL; static volatile int *lasat_int_mask = NULL; static volatile int lasat_int_mask_shift; -extern asmlinkage void lasatIRQ(void); - void disable_lasat_irq(unsigned int irq_nr) { unsigned long flags; @@ -109,11 +108,17 @@ static unsigned long get_int_status_200(void) return int_status; } -void lasat_hw0_irqdispatch(struct pt_regs *regs) +asmlinkage void plat_irq_dispatch(struct pt_regs *regs) { unsigned long int_status; + unsigned int cause = read_c0_cause(); int irq; + if (cause & CAUSEF_IP7) { /* R4000 count / compare IRQ */ + ll_timer_interrupt(7, regs); + return; + } + int_status = get_int_status(); /* if int_status == 0, then the interrupt has already been cleared */ @@ -147,9 +152,6 @@ void __init arch_init_irq(void) panic("arch_init_irq: mips_machtype incorrect"); } - /* Now safe to set the exception vector. */ - set_except_vector(0, lasatIRQ); - for (i = 0; i <= LASATINT_END; i++) { irq_desc[i].status = IRQ_DISABLED; irq_desc[i].action = 0; diff --git a/arch/mips/lasat/lasatIRQ.S b/arch/mips/lasat/lasatIRQ.S deleted file mode 100644 index 2a2b0d05656..00000000000 --- a/arch/mips/lasat/lasatIRQ.S +++ /dev/null @@ -1,69 +0,0 @@ -/* - * Carsten Langgaard, carstenl@mips.com - * Copyright (C) 1999, 2000 MIPS Technologies, Inc. All rights reserved. - * - * This program is free software; you can distribute it and/or modify it - * under the terms of the GNU General Public License (Version 2) as - * published by the Free Software Foundation. - * - * This program is distributed in the hope it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License - * for more details. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. - * - * Interrupt exception dispatch code. - */ -#include -#include -#include -#include - - .text - .set noreorder - .align 5 - NESTED(lasatIRQ, PT_SIZE, sp) - .set noat - SAVE_ALL - CLI - .set at - .set noreorder - - mfc0 s0, CP0_CAUSE # get irq mask - - /* First we check for r4k counter/timer IRQ. */ - andi a0, s0, CAUSEF_IP7 - beq a0, zero, 1f - andi a0, s0, CAUSEF_IP2 # delay slot, check hw0 interrupt - - /* Wheee, a timer interrupt. */ - li a0, 7 - jal ll_timer_interrupt - move a1, sp - - j ret_from_irq - nop - -1: - /* Wheee, combined hardware level zero interrupt. */ - jal lasat_hw0_irqdispatch - move a0, sp # delay slot - - j ret_from_irq - nop # delay slot - -1: - /* - * Here by mistake? This is possible, what can happen is that by the - * time we take the exception the IRQ pin goes low, so just leave if - * this is the case. - */ - move a1,s0 - mfc0 a1, CP0_EPC - - j ret_from_irq - nop - END(lasatIRQ) diff --git a/arch/mips/mips-boards/atlas/Makefile b/arch/mips/mips-boards/atlas/Makefile index 50fec2a5aee..d8dab75906b 100644 --- a/arch/mips/mips-boards/atlas/Makefile +++ b/arch/mips/mips-boards/atlas/Makefile @@ -16,5 +16,5 @@ # 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. # -obj-y := atlas_int.o atlas-irq.o atlas_setup.o +obj-y := atlas_int.o atlas_setup.o obj-$(CONFIG_KGDB) += atlas_gdb.o diff --git a/arch/mips/mips-boards/atlas/atlas-irq.S b/arch/mips/mips-boards/atlas/atlas-irq.S deleted file mode 100644 index 31bc99a5238..00000000000 --- a/arch/mips/mips-boards/atlas/atlas-irq.S +++ /dev/null @@ -1,120 +0,0 @@ -/* - * Carsten Langgaard, carstenl@mips.com - * Copyright (C) 1999, 2000 MIPS Technologies, Inc. All rights reserved. - * - * This program is free software; you can distribute it and/or modify it - * under the terms of the GNU General Public License (Version 2) as - * published by the Free Software Foundation. - * - * This program is distributed in the hope it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License - * for more details. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. - * - * Interrupt exception dispatch code. - */ -#include - -#include -#include -#include -#include -#include - -/* - * Furthermore, the IRQs on the MIPS board look basically (barring software - * IRQs which we don't use at all and all external interrupt sources are - * combined together on hardware interrupt 0 (MIPS IRQ 2)) like: - * - * MIPS IRQ Source - * -------- ------ - * 0 Software (ignored) - * 1 Software (ignored) - * 2 Combined hardware interrupt (hw0) - * 3 Hardware (ignored) - * 4 Hardware (ignored) - * 5 Hardware (ignored) - * 6 Hardware (ignored) - * 7 R4k timer (what we use) - * - * Note: On the SEAD board thing are a little bit different. - * Here IRQ 2 (hw0) is wired to the UART0 and IRQ 3 (hw1) is wired - * wired to UART1. - * - * We handle the IRQ according to _our_ priority which is: - * - * Highest ---- R4k Timer - * Lowest ---- Combined hardware interrupt - * - * then we just return, if multiple IRQs are pending then we will just take - * another exception, big deal. - */ - - .text - .set noreorder - .set noat - .align 5 - NESTED(mipsIRQ, PT_SIZE, sp) - SAVE_ALL - CLI - .set at - - mfc0 s0, CP0_CAUSE # get irq bits - mfc0 s1, CP0_STATUS # get irq mask - andi s0, ST0_IM # CAUSE.CE may be non-zero! - and s0, s1 - -#if defined(CONFIG_CPU_MIPS32) || defined(CONFIG_CPU_MIPS64) - .set mips32 - clz a0, s0 - .set mips0 - negu a0 - addu a0, 31-CAUSEB_IP - bltz a0, spurious -#else - beqz s0, spurious - li a0, 7 - - and t0, s0, 0xf000 - sltiu t0, t0, 1 - sll t0, 2 - subu a0, t0 - sll s0, t0 - - and t0, s0, 0xc000 - sltiu t0, t0, 1 - sll t0, 1 - subu a0, t0 - sll s0, t0 - - and t0, s0, 0x8000 - sltiu t0, t0, 1 - # sll t0, 0 - subu a0, t0 - # sll s0, t0 -#endif - - li a1, MIPSCPU_INT_ATLAS - bne a0, a1, 1f - addu a0, MIPSCPU_INT_BASE - - jal atlas_hw0_irqdispatch - move a0, sp - - j ret_from_irq - nop - -1: jal do_IRQ - move a1, sp - - j ret_from_irq - nop - -spurious: - j spurious_interrupt - nop - END(mipsIRQ) diff --git a/arch/mips/mips-boards/atlas/atlas_int.c b/arch/mips/mips-boards/atlas/atlas_int.c index bc0ebc69bfb..db53950b7cf 100644 --- a/arch/mips/mips-boards/atlas/atlas_int.c +++ b/arch/mips/mips-boards/atlas/atlas_int.c @@ -39,8 +39,6 @@ static struct atlas_ictrl_regs *atlas_hw0_icregs; -extern asmlinkage void mipsIRQ(void); - #if 0 #define DEBUG_INT(x...) printk(x) #else @@ -98,7 +96,7 @@ static inline int ls1bit32(unsigned int x) return b; } -void atlas_hw0_irqdispatch(struct pt_regs *regs) +static inline void atlas_hw0_irqdispatch(struct pt_regs *regs) { unsigned long int_status; int irq; @@ -116,6 +114,91 @@ void atlas_hw0_irqdispatch(struct pt_regs *regs) do_IRQ(irq, regs); } +static inline int clz(unsigned long x) +{ + __asm__ ( + " .set push \n" + " .set mips32 \n" + " clz %0, %1 \n" + " .set pop \n" + : "=r" (x) + : "r" (x)); + + return x; +} + +/* + * Version of ffs that only looks at bits 12..15. + */ +static inline unsigned int irq_ffs(unsigned int pending) +{ +#if defined(CONFIG_CPU_MIPS32) || defined(CONFIG_CPU_MIPS64) + return -clz(pending) + 31 - CAUSEB_IP; +#else + unsigned int a0 = 7; + unsigned int t0; + + t0 = s0 & 0xf000; + t0 = t0 < 1; + t0 = t0 << 2; + a0 = a0 - t0; + s0 = s0 << t0; + + t0 = s0 & 0xc000; + t0 = t0 < 1; + t0 = t0 << 1; + a0 = a0 - t0; + s0 = s0 << t0; + + t0 = s0 & 0x8000; + t0 = t0 < 1; + //t0 = t0 << 2; + a0 = a0 - t0; + //s0 = s0 << t0; + + return a0; +#endif +} + +/* + * IRQs on the Atlas board look basically (barring software IRQs which we + * don't use at all and all external interrupt sources are combined together + * on hardware interrupt 0 (MIPS IRQ 2)) like: + * + * MIPS IRQ Source + * -------- ------ + * 0 Software (ignored) + * 1 Software (ignored) + * 2 Combined hardware interrupt (hw0) + * 3 Hardware (ignored) + * 4 Hardware (ignored) + * 5 Hardware (ignored) + * 6 Hardware (ignored) + * 7 R4k timer (what we use) + * + * We handle the IRQ according to _our_ priority which is: + * + * Highest ---- R4k Timer + * Lowest ---- Combined hardware interrupt + * + * then we just return, if multiple IRQs are pending then we will just take + * another exception, big deal. + */ +asmlinkage void plat_irq_dispatch(struct pt_regs *regs) +{ + unsigned int pending = read_c0_cause() & read_c0_status() & ST0_IM; + int irq; + + irq = irq_ffs(pending); + + if (irq == MIPSCPU_INT_ATLAS) + atlas_hw0_irqdispatch(regs); + else if (irq > 0) + do_IRQ(MIPSCPU_INT_BASE + irq, regs); + else + spurious_interrupt(regs); +} + void __init arch_init_irq(void) { int i; @@ -128,9 +211,6 @@ void __init arch_init_irq(void) */ atlas_hw0_icregs->intrsten = 0xffffffff; - /* Now safe to set the exception vector. */ - set_except_vector(0, mipsIRQ); - for (i = ATLASINT_BASE; i <= ATLASINT_END; i++) { irq_desc[i].status = IRQ_DISABLED; irq_desc[i].action = 0; diff --git a/arch/mips/mips-boards/malta/Makefile b/arch/mips/mips-boards/malta/Makefile index 3ae8fe6c007..fd4c143c0e2 100644 --- a/arch/mips/mips-boards/malta/Makefile +++ b/arch/mips/mips-boards/malta/Makefile @@ -19,4 +19,4 @@ # under Linux. # -obj-y := malta_int.o malta-irq.o malta_setup.o +obj-y := malta_int.o malta_setup.o diff --git a/arch/mips/mips-boards/malta/malta-irq.S b/arch/mips/mips-boards/malta/malta-irq.S deleted file mode 100644 index 6217aff3be0..00000000000 --- a/arch/mips/mips-boards/malta/malta-irq.S +++ /dev/null @@ -1,122 +0,0 @@ -/* - * Carsten Langgaard, carstenl@mips.com - * Copyright (C) 1999, 2000 MIPS Technologies, Inc. All rights reserved. - * - * ######################################################################## - * - * This program is free software; you can distribute it and/or modify it - * under the terms of the GNU General Public License (Version 2) as - * published by the Free Software Foundation. - * - * This program is distributed in the hope it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License - * for more details. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. - * - * ######################################################################## - * - * Interrupt exception dispatch code. - * - */ -#include - -#include -#include -#include -#include -#include - -/* - * IRQs on the Malta board look basically (barring software IRQs which we - * don't use at all and all external interrupt sources are combined together - * on hardware interrupt 0 (MIPS IRQ 2)) like: - * - * MIPS IRQ Source - * -------- ------ - * 0 Software (ignored) - * 1 Software (ignored) - * 2 Combined hardware interrupt (hw0) - * 3 Hardware (ignored) - * 4 Hardware (ignored) - * 5 Hardware (ignored) - * 6 Hardware (ignored) - * 7 R4k timer (what we use) - * - * We handle the IRQ according to _our_ priority which is: - * - * Highest ---- R4k Timer - * Lowest ---- Combined hardware interrupt - * - * then we just return, if multiple IRQs are pending then we will just take - * another exception, big deal. - */ - - .text - .set noreorder - .set noat - .align 5 - NESTED(mipsIRQ, PT_SIZE, sp) - SAVE_ALL - CLI - .set at - - mfc0 s0, CP0_CAUSE # get irq bits - mfc0 s1, CP0_STATUS # get irq mask - andi s0, ST0_IM # CAUSE.CE may be non-zero! - and s0, s1 - -#if defined(CONFIG_CPU_MIPS32) || defined(CONFIG_CPU_MIPS64) - .set mips32 - clz a0, s0 - .set mips0 - negu a0 - addu a0, 31-CAUSEB_IP - bltz a0, spurious -#else - beqz s0, spurious - li a0, 7 - - and t0, s0, 0xf000 - sltiu t0, t0, 1 - sll t0, 2 - subu a0, t0 - sll s0, t0 - - and t0, s0, 0xc000 - sltiu t0, t0, 1 - sll t0, 1 - subu a0, t0 - sll s0, t0 - - and t0, s0, 0x8000 - sltiu t0, t0, 1 - # sll t0, 0 - subu a0, t0 - # sll s0, t0 -#endif - - li a1, MIPSCPU_INT_I8259A - bne a0, a1, 1f - addu a0, MIPSCPU_INT_BASE - - jal malta_hw0_irqdispatch - move a0, sp - - j ret_from_irq - nop -1: - - jal do_IRQ - move a1, sp - - j ret_from_irq - nop - -spurious: - j spurious_interrupt - nop - END(mipsIRQ) diff --git a/arch/mips/mips-boards/malta/malta_int.c b/arch/mips/mips-boards/malta/malta_int.c index d06dc5ad6c9..1da8c18b9c8 100644 --- a/arch/mips/mips-boards/malta/malta_int.c +++ b/arch/mips/mips-boards/malta/malta_int.c @@ -40,7 +40,6 @@ #include #include -extern asmlinkage void mipsIRQ(void); extern void mips_timer_interrupt(void); static DEFINE_SPINLOCK(mips_irq_lock); @@ -114,7 +113,7 @@ static inline int get_int(void) return irq; } -void malta_hw0_irqdispatch(struct pt_regs *regs) +static void malta_hw0_irqdispatch(struct pt_regs *regs) { int irq; @@ -182,6 +181,92 @@ void corehi_irqdispatch(struct pt_regs *regs) die("CoreHi interrupt", regs); } +static inline int clz(unsigned long x) +{ + __asm__ ( + " .set push \n" + " .set mips32 \n" + " clz %0, %1 \n" + " .set pop \n" + : "=r" (x) + : "r" (x)); + + return x; +} + +/* + * Version of ffs that only looks at bits 12..15. + */ +static inline unsigned int irq_ffs(unsigned int pending) +{ +#if defined(CONFIG_CPU_MIPS32) || defined(CONFIG_CPU_MIPS64) + return -clz(pending) + 31 - CAUSEB_IP; +#else + unsigned int a0 = 7; + unsigned int t0; + + t0 = s0 & 0xf000; + t0 = t0 < 1; + t0 = t0 << 2; + a0 = a0 - t0; + s0 = s0 << t0; + + t0 = s0 & 0xc000; + t0 = t0 < 1; + t0 = t0 << 1; + a0 = a0 - t0; + s0 = s0 << t0; + + t0 = s0 & 0x8000; + t0 = t0 < 1; + //t0 = t0 << 2; + a0 = a0 - t0; + //s0 = s0 << t0; + + return a0; +#endif +} + +/* + * IRQs on the Malta board look basically (barring software IRQs which we + * don't use at all and all external interrupt sources are combined together + * on hardware interrupt 0 (MIPS IRQ 2)) like: + * + * MIPS IRQ Source + * -------- ------ + * 0 Software (ignored) + * 1 Software (ignored) + * 2 Combined hardware interrupt (hw0) + * 3 Hardware (ignored) + * 4 Hardware (ignored) + * 5 Hardware (ignored) + * 6 Hardware (ignored) + * 7 R4k timer (what we use) + * + * We handle the IRQ according to _our_ priority which is: + * + * Highest ---- R4k Timer + * Lowest ---- Combined hardware interrupt + * + * then we just return, if multiple IRQs are pending then we will just take + * another exception, big deal. + */ + +asmlinkage void plat_irq_dispatch(struct pt_regs *regs) +{ + unsigned int pending = read_c0_cause() & read_c0_status() & ST0_IM; + int irq; + + irq = irq_ffs(pending); + + if (irq == MIPSCPU_INT_I8259A) + malta_hw0_irqdispatch(regs); + else if (irq > 0) + do_IRQ(MIPSCPU_INT_BASE + irq, regs); + else + spurious_interrupt(regs); +} + static struct irqaction i8259irq = { .handler = no_action, .name = "XT-PIC cascade" @@ -214,7 +299,6 @@ int __initdata msc_nr_eicirqs = sizeof(msc_eicirqmap)/sizeof(msc_irqmap_t); void __init arch_init_irq(void) { - set_except_vector(0, mipsIRQ); init_i8259_irqs(); if (!cpu_has_veic) @@ -245,7 +329,6 @@ void __init arch_init_irq(void) setup_irq (MIPSCPU_INT_BASE+MIPSCPU_INT_COREHI, &corehi_irqaction); } else { - set_except_vector(0, mipsIRQ); setup_irq (MIPSCPU_INT_BASE+MIPSCPU_INT_I8259A, &i8259irq); setup_irq (MIPSCPU_INT_BASE+MIPSCPU_INT_COREHI, &corehi_irqaction); } diff --git a/arch/mips/mips-boards/sead/Makefile b/arch/mips/mips-boards/sead/Makefile index 01780b60534..224bb848f16 100644 --- a/arch/mips/mips-boards/sead/Makefile +++ b/arch/mips/mips-boards/sead/Makefile @@ -23,4 +23,4 @@ # under Linux. # -obj-y := sead_int.o sead-irq.o sead_setup.o +obj-y := sead_int.o sead_setup.o diff --git a/arch/mips/mips-boards/sead/sead-irq.S b/arch/mips/mips-boards/sead/sead-irq.S deleted file mode 100644 index d5dea1d2e22..00000000000 --- a/arch/mips/mips-boards/sead/sead-irq.S +++ /dev/null @@ -1,111 +0,0 @@ -/* - * Carsten Langgaard, carstenl@mips.com - * Copyright (C) 1999, 2000 MIPS Technologies, Inc. All rights reserved. - * - * ######################################################################## - * - * This program is free software; you can distribute it and/or modify it - * under the terms of the GNU General Public License (Version 2) as - * published by the Free Software Foundation. - * - * This program is distributed in the hope it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License - * for more details. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. - * - * ######################################################################## - * - * Interrupt exception dispatch code. - * - */ -#include - -#include -#include -#include -#include -#include - -/* - * IRQs on the SEAD board look basically are combined together on hardware - * interrupt 0 (MIPS IRQ 2)) like: - * - * MIPS IRQ Source - * -------- ------ - * 0 Software (ignored) - * 1 Software (ignored) - * 2 UART0 (hw0) - * 3 UART1 (hw1) - * 4 Hardware (ignored) - * 5 Hardware (ignored) - * 6 Hardware (ignored) - * 7 R4k timer (what we use) - * - * We handle the IRQ according to _our_ priority which is: - * - * Highest ---- R4k Timer - * Lowest ---- Combined hardware interrupt - * - * then we just return, if multiple IRQs are pending then we will just take - * another exception, big deal. - */ - - .text - .set noreorder - .set noat - .align 5 - NESTED(mipsIRQ, PT_SIZE, sp) - SAVE_ALL - CLI - .set at - - mfc0 s0, CP0_CAUSE # get irq bits - mfc0 s1, CP0_STATUS # get irq mask - andi s0, ST0_IM # CAUSE.CE may be non-zero! - and s0, s1 - -#if defined(CONFIG_CPU_MIPS32) || defined(CONFIG_CPU_MIPS64) - .set mips32 - clz a0, s0 - .set mips0 - negu a0 - addu a0, 31-CAUSEB_IP - bltz a0, spurious -#else - beqz s0, spurious - li a0, 7 - - and t0, s0, 0xf000 - sltiu t0, t0, 1 - sll t0, 2 - subu a0, t0 - sll s0, t0 - - and t0, s0, 0xc000 - sltiu t0, t0, 1 - sll t0, 1 - subu a0, t0 - sll s0, t0 - - and t0, s0, 0x8000 - sltiu t0, t0, 1 - # sll t0, 0 - subu a0, t0 - # sll s0, t0 -#endif - - addu a0, MIPSCPU_INT_BASE - jal do_IRQ - move a1, sp - - j ret_from_irq - nop - -spurious: - j spurious_interrupt - nop - END(mipsIRQ) diff --git a/arch/mips/mips-boards/sead/sead_int.c b/arch/mips/mips-boards/sead/sead_int.c index 90fda0d9915..9168d934c66 100644 --- a/arch/mips/mips-boards/sead/sead_int.c +++ b/arch/mips/mips-boards/sead/sead_int.c @@ -24,16 +24,94 @@ #include #include +#include #include #include -extern asmlinkage void mipsIRQ(void); +static inline int clz(unsigned long x) +{ + __asm__ ( + " .set push \n" + " .set mips32 \n" + " clz %0, %1 \n" + " .set pop \n" + : "=r" (x) + : "r" (x)); + + return x; +} + +/* + * Version of ffs that only looks at bits 12..15. + */ +static inline unsigned int irq_ffs(unsigned int pending) +{ +#if defined(CONFIG_CPU_MIPS32) || defined(CONFIG_CPU_MIPS64) + return -clz(pending) + 31 - CAUSEB_IP; +#else + unsigned int a0 = 7; + unsigned int t0; + + t0 = s0 & 0xf000; + t0 = t0 < 1; + t0 = t0 << 2; + a0 = a0 - t0; + s0 = s0 << t0; + + t0 = s0 & 0xc000; + t0 = t0 < 1; + t0 = t0 << 1; + a0 = a0 - t0; + s0 = s0 << t0; + + t0 = s0 & 0x8000; + t0 = t0 < 1; + //t0 = t0 << 2; + a0 = a0 - t0; + //s0 = s0 << t0; + + return a0; +#endif +} + +/* + * IRQs on the SEAD board look basically are combined together on hardware + * interrupt 0 (MIPS IRQ 2)) like: + * + * MIPS IRQ Source + * -------- ------ + * 0 Software (ignored) + * 1 Software (ignored) + * 2 UART0 (hw0) + * 3 UART1 (hw1) + * 4 Hardware (ignored) + * 5 Hardware (ignored) + * 6 Hardware (ignored) + * 7 R4k timer (what we use) + * + * We handle the IRQ according to _our_ priority which is: + * + * Highest ---- R4k Timer + * Lowest ---- Combined hardware interrupt + * + * then we just return, if multiple IRQs are pending then we will just take + * another exception, big deal. + */ +asmlinkage void plat_irq_dispatch(struct pt_regs *regs) +{ + unsigned int pending = read_c0_cause() & read_c0_status() & ST0_IM; + int irq; + + irq = irq_ffs(pending); + + if (irq >= 0) + do_IRQ(MIPSCPU_INT_BASE + irq, regs); + else + spurious_interrupt(regs); +} void __init arch_init_irq(void) { mips_cpu_irq_init(MIPSCPU_INT_BASE); - - /* Now safe to set the exception vector. */ - set_except_vector(0, mipsIRQ); } diff --git a/arch/mips/mips-boards/sim/sim_int.c b/arch/mips/mips-boards/sim/sim_int.c index a4d0a2c0503..2c15c8efec4 100644 --- a/arch/mips/mips-boards/sim/sim_int.c +++ b/arch/mips/mips-boards/sim/sim_int.c @@ -25,17 +25,71 @@ extern void mips_cpu_irq_init(int); -extern asmlinkage void simIRQ(void); +static inline int clz(unsigned long x) +{ + __asm__ ( + " .set push \n" + " .set mips32 \n" + " clz %0, %1 \n" + " .set pop \n" + : "=r" (x) + : "r" (x)); + + return x; +} + +/* + * Version of ffs that only looks at bits 12..15. + */ +static inline unsigned int irq_ffs(unsigned int pending) +{ +#if defined(CONFIG_CPU_MIPS32) || defined(CONFIG_CPU_MIPS64) + return -clz(pending) + 31 - CAUSEB_IP; +#else + unsigned int a0 = 7; + unsigned int t0; + + t0 = s0 & 0xf000; + t0 = t0 < 1; + t0 = t0 << 2; + a0 = a0 - t0; + s0 = s0 << t0; + + t0 = s0 & 0xc000; + t0 = t0 < 1; + t0 = t0 << 1; + a0 = a0 - t0; + s0 = s0 << t0; -asmlinkage void sim_hw0_irqdispatch(struct pt_regs *regs) + t0 = s0 & 0x8000; + t0 = t0 < 1; + //t0 = t0 << 2; + a0 = a0 - t0; + //s0 = s0 << t0; + + return a0; +#endif +} + +static inline void sim_hw0_irqdispatch(struct pt_regs *regs) { do_IRQ(2, regs); } -void __init arch_init_irq(void) +asmlinkage void plat_irq_dispatch(struct pt_regs *regs) { - /* Now safe to set the exception vector. */ - set_except_vector(0, simIRQ); + unsigned int pending = read_c0_cause() & read_c0_status() & ST0_IM; + int irq; + + irq = irq_ffs(pending); + if (irq > 0) + do_IRQ(MIPSCPU_INT_BASE + irq, regs); + else + spurious_interrupt(regs); +} + +void __init arch_init_irq(void) +{ mips_cpu_irq_init(MIPSCPU_INT_BASE); } diff --git a/arch/mips/momentum/jaguar_atx/Makefile b/arch/mips/momentum/jaguar_atx/Makefile index 20bbd3ea44a..67372f3f965 100644 --- a/arch/mips/momentum/jaguar_atx/Makefile +++ b/arch/mips/momentum/jaguar_atx/Makefile @@ -6,7 +6,7 @@ # unless it's something special (ie not a .c file). # -obj-y += int-handler.o irq.o prom.o reset.o setup.o +obj-y += irq.o prom.o reset.o setup.o obj-$(CONFIG_SERIAL_8250_CONSOLE) += ja-console.o obj-$(CONFIG_REMOTE_DEBUG) += dbg_io.o diff --git a/arch/mips/momentum/jaguar_atx/int-handler.S b/arch/mips/momentum/jaguar_atx/int-handler.S deleted file mode 100644 index 55bc789733f..00000000000 --- a/arch/mips/momentum/jaguar_atx/int-handler.S +++ /dev/null @@ -1,128 +0,0 @@ -/* - * Copyright 2002 Momentum Computer Inc. - * Author: Matthew Dharm - * - * Based on work: - * Copyright 2001 MontaVista Software Inc. - * Author: jsun@mvista.com or jsun@junsun.net - * - * First-level interrupt dispatcher for Jaguar-ATX board. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - */ -#include -#include -#include -#include -#include - -/* - * First level interrupt dispatcher for Ocelot-CS board - */ - .align 5 - NESTED(jaguar_handle_int, PT_SIZE, sp) - SAVE_ALL - CLI - .set at - mfc0 t0, CP0_CAUSE - mfc0 t2, CP0_STATUS - - and t0, t2 - - andi t1, t0, STATUSF_IP0 /* sw0 software interrupt */ - bnez t1, ll_sw0_irq - andi t1, t0, STATUSF_IP1 /* sw1 software interrupt */ - bnez t1, ll_sw1_irq - andi t1, t0, STATUSF_IP2 /* int0 hardware line */ - bnez t1, ll_pcixa_irq - andi t1, t0, STATUSF_IP3 /* int1 hardware line */ - bnez t1, ll_pcixb_irq - andi t1, t0, STATUSF_IP4 /* int2 hardware line */ - bnez t1, ll_pcia_irq - andi t1, t0, STATUSF_IP5 /* int3 hardware line */ - bnez t1, ll_pcib_irq - andi t1, t0, STATUSF_IP6 /* int4 hardware line */ - bnez t1, ll_uart_irq - andi t1, t0, STATUSF_IP7 /* cpu timer */ - bnez t1, ll_cputimer_irq - - nop - nop - - /* now look at extended interrupts */ - mfc0 t0, CP0_CAUSE - cfc0 t1, CP0_S1_INTCONTROL - - /* shift the mask 8 bits left to line up the bits */ - sll t2, t1, 8 - - and t0, t2 - srl t0, t0, 16 - - andi t1, t0, STATUSF_IP8 /* int6 hardware line */ - bnez t1, ll_mv64340_decode_irq - - nop - nop - - .set reorder - - /* wrong alarm or masked ... */ - j spurious_interrupt - nop - END(jaguar_handle_int) - - .align 5 -ll_sw0_irq: - li a0, 0 - move a1, sp - jal do_IRQ - j ret_from_irq -ll_sw1_irq: - li a0, 1 - move a1, sp - jal do_IRQ - j ret_from_irq -ll_pcixa_irq: - li a0, 2 - move a1, sp - jal do_IRQ - j ret_from_irq - -ll_pcixb_irq: - li a0, 3 - move a1, sp - jal do_IRQ - j ret_from_irq - -ll_pcia_irq: - li a0, 4 - move a1, sp - jal do_IRQ - j ret_from_irq - -ll_pcib_irq: - li a0, 5 - move a1, sp - jal do_IRQ - j ret_from_irq - -ll_uart_irq: - li a0, 6 - move a1, sp - jal do_IRQ - j ret_from_irq - -ll_cputimer_irq: - li a0, 7 - move a1, sp - jal ll_timer_interrupt - j ret_from_irq - -ll_mv64340_decode_irq: - move a0, sp - jal ll_mv64340_irq - j ret_from_irq diff --git a/arch/mips/momentum/jaguar_atx/irq.c b/arch/mips/momentum/jaguar_atx/irq.c index 15588f91ace..ec4032b38f1 100644 --- a/arch/mips/momentum/jaguar_atx/irq.c +++ b/arch/mips/momentum/jaguar_atx/irq.c @@ -10,7 +10,7 @@ * Copyright 2001 MontaVista Software Inc. * Author: Jun Sun, jsun@mvista.com or jsun@junsun.net * - * Copyright (C) 2000, 2001 Ralf Baechle (ralf@gnu.org) + * Copyright (C) 2000, 01, 06 Ralf Baechle (ralf@linux-mips.org) * * This program is free software; you can redistribute it and/or modify it * under the terms of the GNU General Public License as published by the @@ -38,8 +38,37 @@ #include #include #include +#include -extern asmlinkage void jaguar_handle_int(void); +asmlinkage void plat_irq_dispatch(struct pt_regs *regs) +{ + unsigned int pending = read_c0_cause() & read_c0_status(); + + if (pending & STATUSF_IP0) + do_IRQ(0, regs); + else if (pending & STATUSF_IP1) + do_IRQ(1, regs); + else if (pending & STATUSF_IP2) + do_IRQ(2, regs); + else if (pending & STATUSF_IP3) + do_IRQ(3, regs); + else if (pending & STATUSF_IP4) + do_IRQ(4, regs); + else if (pending & STATUSF_IP5) + do_IRQ(5, regs); + else if (pending & STATUSF_IP6) + do_IRQ(6, regs); + else if (pending & STATUSF_IP7) + ll_timer_interrupt(7, regs); + else { + /* + * Now look at the extended interrupts + */ + pending = (read_c0_cause() & (read_c0_intcontrol() << 8)) >> 16; + if (pending & STATUSF_IP8) + ll_mv64340_irq(regs); + } +} static struct irqaction cascade_mv64340 = { no_action, SA_INTERRUPT, CPU_MASK_NONE, "MV64340-Cascade", NULL, NULL @@ -53,8 +82,6 @@ void __init arch_init_irq(void) */ clear_c0_status(ST0_IM); - /* Sets the first-level interrupt dispatcher. */ - set_except_vector(0, jaguar_handle_int); mips_cpu_irq_init(0); rm7k_cpu_irq_init(8); diff --git a/arch/mips/momentum/ocelot_3/Makefile b/arch/mips/momentum/ocelot_3/Makefile index aab8fd89f83..8bcea64dd27 100644 --- a/arch/mips/momentum/ocelot_3/Makefile +++ b/arch/mips/momentum/ocelot_3/Makefile @@ -5,4 +5,4 @@ # removes any old dependencies. DON'T put your own dependencies here # unless it's something special (ie not a .c file). # -obj-y += int-handler.o irq.o prom.o reset.o setup.o +obj-y += irq.o prom.o reset.o setup.o diff --git a/arch/mips/momentum/ocelot_3/int-handler.S b/arch/mips/momentum/ocelot_3/int-handler.S deleted file mode 100644 index b1207262984..00000000000 --- a/arch/mips/momentum/ocelot_3/int-handler.S +++ /dev/null @@ -1,139 +0,0 @@ -/* - * Copyright 2002 Momentum Computer Inc. - * Author: Matthew Dharm - * - * Copyright 2001 MontaVista Software Inc. - * Author: jsun@mvista.com or jsun@junsun.net - * - * Copyright 2004 PMC-Sierra - * Author: Manish Lachwani (lachwani@pmc-sierra.com) - * - * Copyright (C) 2004 MontaVista Software Inc. - * Author: Manish Lachwani, mlachwani@mvista.com - * - * First-level interrupt dispatcher for Ocelot-3 board. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - */ -#include -#include -#include -#include -#include - -/* - * First level interrupt dispatcher for Ocelot-3 board - */ - .align 5 - NESTED(ocelot3_handle_int, PT_SIZE, sp) - SAVE_ALL - CLI - .set at - - mfc0 t0, CP0_CAUSE - mfc0 t2, CP0_STATUS - - and t0, t2 - - andi t1, t0, STATUSF_IP0 /* sw0 software interrupt (IRQ0) */ - bnez t1, ll_sw0_irq - - andi t1, t0, STATUSF_IP1 /* sw1 software interrupt (IRQ1) */ - bnez t1, ll_sw1_irq - - andi t1, t0, STATUSF_IP2 /* int0 hardware line (IRQ2) */ - bnez t1, ll_pci0slot1_irq - - andi t1, t0, STATUSF_IP3 /* int1 hardware line (IRQ3) */ - bnez t1, ll_pci0slot2_irq - - andi t1, t0, STATUSF_IP4 /* int2 hardware line (IRQ4) */ - bnez t1, ll_pci1slot1_irq - - andi t1, t0, STATUSF_IP5 /* int3 hardware line (IRQ5) */ - bnez t1, ll_pci1slot2_irq - - andi t1, t0, STATUSF_IP6 /* int4 hardware line (IRQ6) */ - bnez t1, ll_uart_irq - - andi t1, t0, STATUSF_IP7 /* cpu timer (IRQ7) */ - bnez t1, ll_cputimer_irq - - /* now look at extended interrupts */ - mfc0 t0, CP0_CAUSE - cfc0 t1, CP0_S1_INTCONTROL - - /* shift the mask 8 bits left to line up the bits */ - sll t2, t1, 8 - - and t0, t2 - srl t0, t0, 16 - - andi t1, t0, STATUSF_IP8 /* int6 hardware line (IRQ9) */ - bnez t1, ll_mv64340_decode_irq - - .set reorder - - /* wrong alarm or masked ... */ - jal spurious_interrupt - nop - j ret_from_irq - nop - END(ocelot3_handle_int) - - .align 5 -ll_sw0_irq: - li a0, 0 /* IRQ 1 */ - move a1, sp - jal do_IRQ - j ret_from_irq -ll_sw1_irq: - li a0, 1 /* IRQ 2 */ - move a1, sp - jal do_IRQ - j ret_from_irq - -ll_pci0slot1_irq: - li a0, 2 /* IRQ 3 */ - move a1, sp - jal do_IRQ - j ret_from_irq - -ll_pci0slot2_irq: - li a0, 3 /* IRQ 4 */ - move a1, sp - jal do_IRQ - j ret_from_irq - -ll_pci1slot1_irq: - li a0, 4 /* IRQ 5 */ - move a1, sp - jal do_IRQ - j ret_from_irq - -ll_pci1slot2_irq: - li a0, 5 /* IRQ 6 */ - move a1, sp - jal do_IRQ - j ret_from_irq - -ll_uart_irq: - li a0, 6 /* IRQ 7 */ - move a1, sp - jal do_IRQ - j ret_from_irq - -ll_cputimer_irq: - li a0, 7 /* IRQ 8 */ - move a1, sp - jal do_IRQ - j ret_from_irq - -ll_mv64340_decode_irq: - move a0, sp - jal ll_mv64340_irq - j ret_from_irq - diff --git a/arch/mips/momentum/ocelot_3/irq.c b/arch/mips/momentum/ocelot_3/irq.c index 42464dbd4ad..87c63c340ae 100644 --- a/arch/mips/momentum/ocelot_3/irq.c +++ b/arch/mips/momentum/ocelot_3/irq.c @@ -53,8 +53,6 @@ #include #include -extern asmlinkage void ocelot3_handle_int(void); - static struct irqaction cascade_mv64340 = { no_action, SA_INTERRUPT, CPU_MASK_NONE, "MV64340-Cascade", NULL, NULL }; @@ -67,9 +65,6 @@ void __init arch_init_irq(void) */ clear_c0_status(ST0_IM | ST0_BEV); - /* Sets the first-level interrupt dispatcher. */ - set_except_vector(0, ocelot3_handle_int); - mips_cpu_irq_init(0); rm7k_cpu_irq_init(8); /* set up the cascading interrupts */ @@ -79,3 +74,36 @@ void __init arch_init_irq(void) set_c0_status(ST0_IM); /* IE in the status register */ } + +asmlinkage void plat_irq_dispatch(struct pt_regs *regs) +{ + unsigned int pending = read_c0_cause() & read_c0_status(); + + if (pending & STATUSF_IP0) + do_IRQ(0, regs); + else if (pending & STATUSF_IP1) + do_IRQ(1, regs); + else if (pending & STATUSF_IP2) + do_IRQ(2, regs); + else if (pending & STATUSF_IP3) + do_IRQ(3, regs); + else if (pending & STATUSF_IP4) + do_IRQ(4, regs); + else if (pending & STATUSF_IP5) + do_IRQ(5, regs); + else if (pending & STATUSF_IP6) + do_IRQ(6, regs); + else if (pending & STATUSF_IP7) + do_IRQ(7, regs); + else { + /* + * Now look at the extended interrupts + */ + pending = (read_c0_cause() & (read_c0_intcontrol() << 8)) >> 16; + + if (pending & STATUSF_IP8) + ll_mv64340_irq(regs); + else + spurious_interrupt(regs); + } +} diff --git a/arch/mips/momentum/ocelot_c/Makefile b/arch/mips/momentum/ocelot_c/Makefile index 91240777f97..94802b4db47 100644 --- a/arch/mips/momentum/ocelot_c/Makefile +++ b/arch/mips/momentum/ocelot_c/Makefile @@ -2,7 +2,7 @@ # Makefile for Momentum Computer's Ocelot-C and -CS boards. # -obj-y += cpci-irq.o int-handler.o irq.o prom.o reset.o \ +obj-y += cpci-irq.o irq.o prom.o reset.o \ setup.o uart-irq.o obj-$(CONFIG_KGDB) += dbg_io.o diff --git a/arch/mips/momentum/ocelot_c/int-handler.S b/arch/mips/momentum/ocelot_c/int-handler.S deleted file mode 100644 index f77834193c3..00000000000 --- a/arch/mips/momentum/ocelot_c/int-handler.S +++ /dev/null @@ -1,103 +0,0 @@ -/* - * Copyright 2002 Momentum Computer Inc. - * Author: Matthew Dharm - * - * Copyright 2001 MontaVista Software Inc. - * Author: jsun@mvista.com or jsun@junsun.net - * - * First-level interrupt dispatcher for Ocelot-CS board. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - */ -#include -#include -#include -#include -#include -#include "ocelot_c_fpga.h" - -/* - * First level interrupt dispatcher for Ocelot-CS board - */ - .align 5 - NESTED(ocelot_handle_int, PT_SIZE, sp) - SAVE_ALL - CLI - .set at - mfc0 t0, CP0_CAUSE - mfc0 t2, CP0_STATUS - - and t0, t2 - - andi t1, t0, STATUSF_IP0 /* sw0 software interrupt */ - bnez t1, ll_sw0_irq - andi t1, t0, STATUSF_IP1 /* sw1 software interrupt */ - bnez t1, ll_sw1_irq - andi t1, t0, STATUSF_IP2 /* int0 hardware line */ - bnez t1, ll_scsi_irq - andi t1, t0, STATUSF_IP3 /* int1 hardware line */ - bnez t1, ll_uart_decode_irq - andi t1, t0, STATUSF_IP4 /* int2 hardware line */ - bnez t1, ll_pmc_irq - andi t1, t0, STATUSF_IP5 /* int3 hardware line */ - bnez t1, ll_cpci_decode_irq - andi t1, t0, STATUSF_IP6 /* int4 hardware line */ - bnez t1, ll_mv64340_decode_irq - andi t1, t0, STATUSF_IP7 /* cpu timer */ - bnez t1, ll_cputimer_irq - - .set reorder - - /* wrong alarm or masked ... */ - jal spurious_interrupt - nop - j ret_from_irq - END(ocelot_handle_int) - - .align 5 -ll_sw0_irq: - li a0, 0 - move a1, sp - jal do_IRQ - j ret_from_irq -ll_sw1_irq: - li a0, 1 - move a1, sp - jal do_IRQ - j ret_from_irq -ll_scsi_irq: - li a0, 2 - move a1, sp - jal do_IRQ - j ret_from_irq - -ll_uart_decode_irq: - move a0, sp - jal ll_uart_irq - j ret_from_irq - -ll_pmc_irq: - li a0, 4 - move a1, sp - jal do_IRQ - j ret_from_irq - -ll_cpci_decode_irq: - move a0, sp - jal ll_cpci_irq - j ret_from_irq - -ll_mv64340_decode_irq: - move a0, sp - jal ll_mv64340_irq - j ret_from_irq - -ll_cputimer_irq: - li a0, 7 - move a1, sp - jal do_IRQ - j ret_from_irq - diff --git a/arch/mips/momentum/ocelot_c/irq.c b/arch/mips/momentum/ocelot_c/irq.c index a5764bc20e3..86f61ce59e5 100644 --- a/arch/mips/momentum/ocelot_c/irq.c +++ b/arch/mips/momentum/ocelot_c/irq.c @@ -48,7 +48,6 @@ #include #include -extern asmlinkage void ocelot_handle_int(void); extern void uart_irq_init(void); extern void cpci_irq_init(void); @@ -60,6 +59,33 @@ static struct irqaction cascade_mv64340 = { no_action, SA_INTERRUPT, CPU_MASK_NONE, "cascade via MV64340", NULL, NULL }; +extern void ll_uart_irq(struct pt_regs *regs); +extern void ll_cpci_irq(struct pt_regs *regs); + +asmlinkage void plat_irq_dispatch(struct pt_regs *regs) +{ + unsigned int pending = read_c0_cause() & read_c0_status(); + + if (pending & STATUSF_IP0) + do_IRQ(0, regs); + else if (pending & STATUSF_IP1) + do_IRQ(1, regs); + else if (pending & STATUSF_IP2) + do_IRQ(2, regs); + else if (pending & STATUSF_IP3) + ll_uart_irq(regs); + else if (pending & STATUSF_IP4) + do_IRQ(4, regs); + else if (pending & STATUSF_IP5) + ll_cpci_irq(regs); + else if (pending & STATUSF_IP6) + ll_mv64340_irq(regs); + else if (pending & STATUSF_IP7) + do_IRQ(7, regs); + else + spurious_interrupt(regs); +} + void __init arch_init_irq(void) { /* @@ -68,8 +94,6 @@ void __init arch_init_irq(void) */ clear_c0_status(ST0_IM); - /* Sets the first-level interrupt dispatcher. */ - set_except_vector(0, ocelot_handle_int); mips_cpu_irq_init(0); /* set up the cascading interrupts */ diff --git a/arch/mips/momentum/ocelot_g/Makefile b/arch/mips/momentum/ocelot_g/Makefile index e5f1cb08697..adb5665d40a 100644 --- a/arch/mips/momentum/ocelot_g/Makefile +++ b/arch/mips/momentum/ocelot_g/Makefile @@ -2,7 +2,7 @@ # Makefile for Momentum Computer's Ocelot-G board. # -obj-y += int-handler.o irq.o gt-irq.o prom.o reset.o setup.o +obj-y += irq.o gt-irq.o prom.o reset.o setup.o obj-$(CONFIG_KGDB) += dbg_io.o EXTRA_AFLAGS := $(CFLAGS) diff --git a/arch/mips/momentum/ocelot_g/int-handler.S b/arch/mips/momentum/ocelot_g/int-handler.S deleted file mode 100644 index 772e8f71317..00000000000 --- a/arch/mips/momentum/ocelot_g/int-handler.S +++ /dev/null @@ -1,131 +0,0 @@ -/* - * Copyright 2001 MontaVista Software Inc. - * Author: jsun@mvista.com or jsun@junsun.net - * - * First-level interrupt dispatcher for ocelot board. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - */ -#include -#include -#include -#include -#include - -/* - * first level interrupt dispatcher for ocelot board - - * We check for the timer first, then check PCI ints A and D. - * Then check for serial IRQ and fall through. - */ - .align 5 - NESTED(ocelot_handle_int, PT_SIZE, sp) - SAVE_ALL - CLI - .set at - mfc0 t0, CP0_CAUSE - mfc0 t2, CP0_STATUS - - and t0, t2 - - andi t1, t0, STATUSF_IP2 /* int0 hardware line */ - bnez t1, ll_pri_enet_irq - andi t1, t0, STATUSF_IP3 /* int1 hardware line */ - bnez t1, ll_sec_enet_irq - andi t1, t0, STATUSF_IP4 /* int2 hardware line */ - bnez t1, ll_uart_irq - andi t1, t0, STATUSF_IP5 /* int3 hardware line */ - bnez t1, ll_cpci_irq - andi t1, t0, STATUSF_IP6 /* int4 hardware line */ - bnez t1, ll_galileo_p0_irq - andi t1, t0, STATUSF_IP7 /* cpu timer */ - bnez t1, ll_cputimer_irq - - /* now look at the extended interrupts */ - mfc0 t0, CP0_CAUSE - cfc0 t1, CP0_S1_INTCONTROL - - /* shift the mask 8 bits left to line up the bits */ - sll t2, t1, 8 - - and t0, t2 - srl t0, t0, 16 - - andi t1, t0, STATUSF_IP8 /* int6 hardware line */ - bnez t1, ll_galileo_p1_irq - andi t1, t0, STATUSF_IP9 /* int7 hardware line */ - bnez t1, ll_pmc_irq - andi t1, t0, STATUSF_IP10 /* int8 hardware line */ - bnez t1, ll_cpci_abcd_irq - andi t1, t0, STATUSF_IP11 /* int9 hardware line */ - bnez t1, ll_testpoint_irq - - .set reorder - - /* wrong alarm or masked ... */ - j spurious_interrupt - nop - END(ocelot_handle_int) - - .align 5 -ll_pri_enet_irq: - li a0, 2 - move a1, sp - jal do_IRQ - j ret_from_irq - -ll_sec_enet_irq: - li a0, 3 - move a1, sp - jal do_IRQ - j ret_from_irq - -ll_uart_irq: - li a0, 4 - move a1, sp - jal do_IRQ - j ret_from_irq - -ll_cpci_irq: - li a0, 5 - move a1, sp - jal do_IRQ - j ret_from_irq - -ll_galileo_p0_irq: - li a0, 6 - move a1, sp - jal do_IRQ - j ret_from_irq - -ll_cputimer_irq: - li a0, 7 - move a1, sp - jal do_IRQ - j ret_from_irq - -ll_galileo_p1_irq: - li a0, 8 - move a1, sp - jal do_IRQ - j ret_from_irq - -ll_pmc_irq: - li a0, 9 - move a1, sp - jal do_IRQ - j ret_from_irq - -ll_cpci_abcd_irq: - li a0, 10 - move a1, sp - jal do_IRQ - j ret_from_irq - -ll_testpoint_irq: - li a0, 11 - move a1, sp - jal do_IRQ - j ret_from_irq diff --git a/arch/mips/momentum/ocelot_g/irq.c b/arch/mips/momentum/ocelot_g/irq.c index 5eb85b16420..7a4a419804f 100644 --- a/arch/mips/momentum/ocelot_g/irq.c +++ b/arch/mips/momentum/ocelot_g/irq.c @@ -48,7 +48,41 @@ #include #include -extern asmlinkage void ocelot_handle_int(void); +asmlinkage void plat_irq_dispatch(struct pt_regs *regs) +{ + unsigned int pending = read_c0_cause() & read_c0_status(); + + if (pending & STATUSF_IP2) + do_IRQ(2, regs); + else if (pending & STATUSF_IP3) + do_IRQ(3, regs); + else if (pending & STATUSF_IP4) + do_IRQ(4, regs); + else if (pending & STATUSF_IP5) + do_IRQ(5, regs); + else if (pending & STATUSF_IP6) + do_IRQ(6, regs); + else if (pending & STATUSF_IP7) + do_IRQ(7, regs); + else { + /* + * Now look at the extended interrupts + */ + pending = (read_c0_cause() & (read_c0_intcontrol() << 8)) >> 16; + + if (pending & STATUSF_IP8) + do_IRQ(8, regs); + else if (pending & STATUSF_IP9) + do_IRQ(9, regs); + else if (pending & STATUSF_IP10) + do_IRQ(10, regs); + else if (pending & STATUSF_IP11) + do_IRQ(11, regs); + else + spurious_interrupt(regs); + } +} + extern void gt64240_irq_init(void); void __init arch_init_irq(void) @@ -60,8 +94,6 @@ void __init arch_init_irq(void) clear_c0_status(ST0_IM); local_irq_disable(); - /* Sets the first-level interrupt dispatcher. */ - set_except_vector(0, ocelot_handle_int); mips_cpu_irq_init(0); rm7k_cpu_irq_init(8); diff --git a/arch/mips/philips/pnx8550/common/Makefile b/arch/mips/philips/pnx8550/common/Makefile index 6e38f3bc443..b7c638166e9 100644 --- a/arch/mips/philips/pnx8550/common/Makefile +++ b/arch/mips/philips/pnx8550/common/Makefile @@ -22,6 +22,6 @@ # under Linux. # -obj-y := setup.o prom.o mipsIRQ.o int.o reset.o time.o proc.o platform.o +obj-y := setup.o prom.o int.o reset.o time.o proc.o platform.o obj-$(CONFIG_PCI) += pci.o obj-$(CONFIG_KGDB) += gdb_hook.o diff --git a/arch/mips/philips/pnx8550/common/int.c b/arch/mips/philips/pnx8550/common/int.c index c500e2d41f2..39ee6314f62 100644 --- a/arch/mips/philips/pnx8550/common/int.c +++ b/arch/mips/philips/pnx8550/common/int.c @@ -38,8 +38,6 @@ #include #include -extern asmlinkage void cp0_irqdispatch(void); - static DEFINE_SPINLOCK(irq_lock); /* default prio for interrupts */ @@ -55,7 +53,7 @@ static char gic_prio[PNX8550_INT_GIC_TOTINT] = { 1 // 70 }; -void hw0_irqdispatch(int irq, struct pt_regs *regs) +static void hw0_irqdispatch(int irq, struct pt_regs *regs) { /* find out which interrupt */ irq = PNX8550_GIC_VECTOR_0 >> 3; @@ -68,7 +66,7 @@ void hw0_irqdispatch(int irq, struct pt_regs *regs) } -void timer_irqdispatch(int irq, struct pt_regs *regs) +static void timer_irqdispatch(int irq, struct pt_regs *regs) { irq = (0x01c0 & read_c0_config7()) >> 6; @@ -88,6 +86,20 @@ void timer_irqdispatch(int irq, struct pt_regs *regs) } } +asmlinkage void plat_irq_dispatch(struct pt_regs *regs) +{ + unsigned int pending = read_c0_status() & read_c0_cause(); + + if (pending & STATUSF_IP2) + do_IRQ(2, regs); + else if (pending & STATUSF_IP7) { + if (read_c0_config7() & 0x01c0) + timer_irqdispatch(7, regs); + } + + spurious_interrupt(regs); +} + static inline void modify_cp0_intmask(unsigned clr_mask, unsigned set_mask) { unsigned long status = read_c0_status(); @@ -223,9 +235,6 @@ void __init arch_init_irq(void) int i; int configPR; - /* init of cp0 interrupts */ - set_except_vector(0, cp0_irqdispatch); - for (i = 0; i < PNX8550_INT_CP0_TOTINT; i++) { irq_desc[i].handler = &level_irq_type; pnx8550_ack(i); /* mask the irq just in case */ diff --git a/arch/mips/philips/pnx8550/common/mipsIRQ.S b/arch/mips/philips/pnx8550/common/mipsIRQ.S deleted file mode 100644 index e049a719f83..00000000000 --- a/arch/mips/philips/pnx8550/common/mipsIRQ.S +++ /dev/null @@ -1,77 +0,0 @@ -/* - * Copyright (c) 2002 Philips, Inc. All rights. - * Copyright (c) 2002 Red Hat, Inc. All rights. - * - * This software may be freely redistributed under the terms of the - * GNU General Public License. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - * - * Based upon arch/mips/galileo-boards/ev64240/int-handler.S - * - */ -#include -#include -#include -#include -#include - -/* - * cp0_irqdispatch - * - * Code to handle in-core interrupt exception. - */ - - .align 5 - .set reorder - .set noat - NESTED(cp0_irqdispatch, PT_SIZE, sp) - SAVE_ALL - CLI - .set at - mfc0 t0,CP0_CAUSE - mfc0 t2,CP0_STATUS - - and t0,t2 - - andi t1,t0,STATUSF_IP2 /* int0 hardware line */ - bnez t1,ll_hw0_irq - nop - - andi t1,t0,STATUSF_IP7 /* int5 hardware line */ - bnez t1,ll_timer_irq - nop - - /* wrong alarm or masked ... */ - - jal spurious_interrupt - nop - j ret_from_irq - END(cp0_irqdispatch) - - .align 5 - .set reorder -ll_hw0_irq: - li a0,2 - move a1,sp - jal hw0_irqdispatch - nop - j ret_from_irq - nop - - .align 5 - .set reorder -ll_timer_irq: - mfc0 t3,CP0_CONFIG,7 - andi t4,t3,0x01c0 - beqz t4,ll_timer_out - nop - li a0,7 - move a1,sp - jal timer_irqdispatch - nop - -ll_timer_out: j ret_from_irq - nop diff --git a/arch/mips/pmc-sierra/yosemite/Makefile b/arch/mips/pmc-sierra/yosemite/Makefile index ae96a71a308..e931e0d4422 100644 --- a/arch/mips/pmc-sierra/yosemite/Makefile +++ b/arch/mips/pmc-sierra/yosemite/Makefile @@ -2,7 +2,7 @@ # Makefile for the PMC-Sierra Titan # -obj-y += irq-handler.o irq.o i2c-yosemite.o prom.o py-console.o setup.o +obj-y += irq.o i2c-yosemite.o prom.o py-console.o setup.o obj-$(CONFIG_KGDB) += dbg_io.o obj-$(CONFIG_SMP) += smp.o diff --git a/arch/mips/pmc-sierra/yosemite/irq-handler.S b/arch/mips/pmc-sierra/yosemite/irq-handler.S deleted file mode 100644 index 33b9c40d4f5..00000000000 --- a/arch/mips/pmc-sierra/yosemite/irq-handler.S +++ /dev/null @@ -1,93 +0,0 @@ -/* - * Copyright 2003, 04 PMC-Sierra Inc. - * Author: Manish Lachwani (lachwani@pmc-sierra.com - * Copyright 2004 Ralf Baechle (ralf@linux-mips.org) - * - * First-level interrupt router for the PMC-Sierra Titan board - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * Titan supports Hypertransport or PCI but not both. Hence, one interrupt - * line is shared between the PCI slot A and Hypertransport. This is the - * Processor INTB #0. - */ - -#include -#include -#include -#include -#include -#include - - .align 5 - NESTED(titan_handle_int, PT_SIZE, sp) - SAVE_ALL - CLI - .set at - .set noreorder - la ra, ret_from_irq - mfc0 t0, CP0_CAUSE - mfc0 t2, CP0_STATUS - - and t0, t2 - - andi t2, t0, STATUSF_IP7 /* INTB5 hardware line */ - bnez t2, ll_timer_irq /* Timer */ - andi t1, t0, STATUSF_IP2 /* INTB0 hardware line */ - bnez t1, ll_pcia_irq /* 64-bit PCI */ - andi t2, t0, STATUSF_IP3 /* INTB1 hardware line */ - bnez t2, ll_pcib_irq /* second 64-bit PCI slot */ - andi t1, t0, STATUSF_IP4 /* INTB2 hardware line */ - bnez t1, ll_duart_irq /* UART */ - andi t2, t0, STATUSF_IP5 /* SMP inter-core interrupts */ - bnez t2, ll_smp_irq - andi t1, t0, STATUSF_IP6 - bnez t1, ll_ht_irq /* Hypertransport */ - - move a0, sp - j do_extended_irq - END(titan_handle_int) - - .set reorder - .align 5 - -ll_pcia_irq: - li a0, 2 - move a1, sp -#ifdef CONFIG_HYPERTRANSPORT - j ll_ht_smp_irq_handler -#else - j do_IRQ -#endif - -ll_pcib_irq: - li a0, 3 - move a1, sp - j do_IRQ - -ll_duart_irq: - li a0, 4 - move a1, sp - j do_IRQ - -ll_smp_irq: - li a0, 5 - move a1, sp -#ifdef CONFIG_SMP - j titan_mailbox_irq -#else - j do_IRQ -#endif - -ll_ht_irq: - li a0, 6 - move a1, sp - j ll_ht_smp_irq_handler - -ll_timer_irq: - li a0, 7 - move a1, sp - j do_IRQ diff --git a/arch/mips/pmc-sierra/yosemite/irq.c b/arch/mips/pmc-sierra/yosemite/irq.c index f4e2897d9bf..a1f524fc4c1 100644 --- a/arch/mips/pmc-sierra/yosemite/irq.c +++ b/arch/mips/pmc-sierra/yosemite/irq.c @@ -2,6 +2,8 @@ * Copyright (C) 2003 PMC-Sierra Inc. * Author: Manish Lachwani (lachwani@pmc-sierra.com) * + * Copyright (C) 2006 Ralf Baechle (ralf@linux-mips.org) + * * This program is free software; you can redistribute it and/or modify it * under the terms of the GNU General Public License as published by the * Free Software Foundation; either version 2 of the License, or (at your @@ -55,7 +57,6 @@ #define HYPERTRANSPORT_INTC 0x7a /* INTC# */ #define HYPERTRANSPORT_INTD 0x7b /* INTD# */ -extern asmlinkage void titan_handle_int(void); extern void jaguar_mailbox_irq(struct pt_regs *); /* @@ -125,6 +126,35 @@ asmlinkage void do_extended_irq(struct pt_regs *regs) } +asmlinkage void plat_irq_dispatch(struct pt_regs *regs) +{ + unsigned int cause = read_c0_cause(); + unsigned int status = read_c0_status(); + unsigned int pending = cause & status; + + if (pending & STATUSF_IP7) { + do_IRQ(7, regs); + } else if (pending & STATUSF_IP2) { +#ifdef CONFIG_HYPERTRANSPORT + ll_ht_smp_irq_handler(2, regs); +#else + do_IRQ(2, regs); +#endif + } else if (pending & STATUSF_IP3) { + do_IRQ(3, regs); + } else if (pending & STATUSF_IP4) { + do_IRQ(4, regs); + } else if (pending & STATUSF_IP5) { +#ifdef CONFIG_SMP + titan_mailbox_irq(regs); +#else + do_IRQ(5, regs); +#endif + } else if (pending & STATUSF_IP6) { + do_IRQ(4, regs); + } +} + #ifdef CONFIG_KGDB extern void init_second_port(void); #endif @@ -136,7 +166,6 @@ void __init arch_init_irq(void) { clear_c0_status(ST0_IM); - set_except_vector(0, titan_handle_int); mips_cpu_irq_init(0); rm7k_cpu_irq_init(8); rm9k_cpu_irq_init(12); diff --git a/arch/mips/qemu/Makefile b/arch/mips/qemu/Makefile index 6a8e8bcef55..730f459f3e9 100644 --- a/arch/mips/qemu/Makefile +++ b/arch/mips/qemu/Makefile @@ -2,6 +2,6 @@ # Makefile for Qemu specific kernel interface routines under Linux. # -obj-y = q-firmware.o q-int.o q-irq.o q-mem.o q-setup.o +obj-y = q-firmware.o q-irq.o q-mem.o q-setup.o obj-$(CONFIG_SMP) += q-smp.o diff --git a/arch/mips/qemu/q-int.S b/arch/mips/qemu/q-int.S deleted file mode 100644 index 6e3dfe5eb14..00000000000 --- a/arch/mips/qemu/q-int.S +++ /dev/null @@ -1,17 +0,0 @@ -/* - * Qemu interrupt handler code. - * - * Copyright (C) 2005 by Ralf Baechle - */ -#include -#include -#include - - .align 5 - NESTED(qemu_handle_int, PT_SIZE, sp) - SAVE_ALL - CLI - move a0, sp - PTR_LA ra, ret_from_irq - j do_qemu_int - END(qemu_handle_int) diff --git a/arch/mips/qemu/q-irq.c b/arch/mips/qemu/q-irq.c index 2c4e0704ff1..3352374c4c7 100644 --- a/arch/mips/qemu/q-irq.c +++ b/arch/mips/qemu/q-irq.c @@ -9,7 +9,7 @@ extern asmlinkage void qemu_handle_int(void); -asmlinkage void do_qemu_int(struct pt_regs *regs) +asmlinkage void plat_irq_dispatch(struct pt_regs *regs) { unsigned int pending = read_c0_status() & read_c0_cause(); @@ -29,7 +29,6 @@ asmlinkage void do_qemu_int(struct pt_regs *regs) void __init arch_init_irq(void) { - set_except_vector(0, qemu_handle_int); mips_hpt_frequency = QEMU_C0_COUNTER_CLOCK; /* 100MHz */ init_i8259_irqs(); diff --git a/arch/mips/sgi-ip22/Makefile b/arch/mips/sgi-ip22/Makefile index eb0820fe50b..6aa4c0cd169 100644 --- a/arch/mips/sgi-ip22/Makefile +++ b/arch/mips/sgi-ip22/Makefile @@ -3,7 +3,7 @@ # under Linux. # -obj-y += ip22-mc.o ip22-hpc.o ip22-int.o ip22-irq.o ip22-berr.o \ +obj-y += ip22-mc.o ip22-hpc.o ip22-int.o ip22-berr.o \ ip22-time.o ip22-nvram.o ip22-reset.o ip22-setup.o obj-$(CONFIG_EISA) += ip22-eisa.o diff --git a/arch/mips/sgi-ip22/ip22-int.c b/arch/mips/sgi-ip22/ip22-int.c index d16fb43b1a9..fc6a7e2b189 100644 --- a/arch/mips/sgi-ip22/ip22-int.c +++ b/arch/mips/sgi-ip22/ip22-int.c @@ -37,7 +37,6 @@ static char lc1msk_to_irqnr[256]; static char lc2msk_to_irqnr[256]; static char lc3msk_to_irqnr[256]; -extern asmlinkage void indyIRQ(void); extern int ip22_eisa_init(void); static void enable_local0_irq(unsigned int irq) @@ -224,7 +223,7 @@ static struct hw_interrupt_type ip22_local3_irq_type = { .end = end_local3_irq, }; -void indy_local0_irqdispatch(struct pt_regs *regs) +static void indy_local0_irqdispatch(struct pt_regs *regs) { u8 mask = sgint->istat0 & sgint->imask0; u8 mask2; @@ -242,7 +241,7 @@ void indy_local0_irqdispatch(struct pt_regs *regs) return; } -void indy_local1_irqdispatch(struct pt_regs *regs) +static void indy_local1_irqdispatch(struct pt_regs *regs) { u8 mask = sgint->istat1 & sgint->imask1; u8 mask2; @@ -262,7 +261,7 @@ void indy_local1_irqdispatch(struct pt_regs *regs) extern void ip22_be_interrupt(int irq, struct pt_regs *regs); -void indy_buserror_irq(struct pt_regs *regs) +static void indy_buserror_irq(struct pt_regs *regs) { int irq = SGI_BUSERR_IRQ; @@ -307,6 +306,56 @@ static struct irqaction map1_cascade = { #define SGI_INTERRUPTS SGINT_LOCAL3 #endif +extern void indy_r4k_timer_interrupt(struct pt_regs *regs); +extern void indy_8254timer_irq(struct pt_regs *regs); + +/* + * IRQs on the INDY look basically (barring software IRQs which we don't use + * at all) like: + * + * MIPS IRQ Source + * -------- ------ + * 0 Software (ignored) + * 1 Software (ignored) + * 2 Local IRQ level zero + * 3 Local IRQ level one + * 4 8254 Timer zero + * 5 8254 Timer one + * 6 Bus Error + * 7 R4k timer (what we use) + * + * We handle the IRQ according to _our_ priority which is: + * + * Highest ---- R4k Timer + * Local IRQ zero + * Local IRQ one + * Bus Error + * 8254 Timer zero + * Lowest ---- 8254 Timer one + * + * then we just return, if multiple IRQs are pending then we will just take + * another exception, big deal. + */ + +asmlinkage void plat_irq_dispatch(struct pt_regs *regs) +{ + unsigned int pending = read_c0_cause(); + + /* + * First we check for r4k counter/timer IRQ. + */ + if (pending & CAUSEF_IP7) + indy_r4k_timer_interrupt(regs); + else if (pending & CAUSEF_IP2) + indy_local0_irqdispatch(regs); + else if (pending & CAUSEF_IP3) + indy_local1_irqdispatch(regs); + else if (pending & CAUSEF_IP6) + indy_buserror_irq(regs); + else if (pending & (CAUSEF_IP4 | CAUSEF_IP5)) + indy_8254timer_irq(regs); +} + extern void mips_cpu_irq_init(unsigned int irq_base); void __init arch_init_irq(void) @@ -369,8 +418,6 @@ void __init arch_init_irq(void) sgint->cmeimask0 = 0; sgint->cmeimask1 = 0; - set_except_vector(0, indyIRQ); - /* init CPU irqs */ mips_cpu_irq_init(SGINT_CPU); diff --git a/arch/mips/sgi-ip22/ip22-irq.S b/arch/mips/sgi-ip22/ip22-irq.S deleted file mode 100644 index 6ccbd9e1d96..00000000000 --- a/arch/mips/sgi-ip22/ip22-irq.S +++ /dev/null @@ -1,118 +0,0 @@ -/* - * ip22-irq.S: Interrupt exception dispatch code for FullHouse and - * Guiness. - * - * Copyright (C) 1996 David S. Miller (dm@engr.sgi.com) - */ - -#include -#include -#include -#include - -/* A lot of complication here is taken away because: - * - * 1) We handle one interrupt and return, sitting in a loop and moving across - * all the pending IRQ bits in the cause register is _NOT_ the answer, the - * common case is one pending IRQ so optimize in that direction. - * - * 2) We need not check against bits in the status register IRQ mask, that - * would make this routine slow as hell. - * - * 3) Linux only thinks in terms of all IRQs on or all IRQs off, nothing in - * between like BSD spl() brain-damage. - * - * Furthermore, the IRQs on the INDY look basically (barring software IRQs - * which we don't use at all) like: - * - * MIPS IRQ Source - * -------- ------ - * 0 Software (ignored) - * 1 Software (ignored) - * 2 Local IRQ level zero - * 3 Local IRQ level one - * 4 8254 Timer zero - * 5 8254 Timer one - * 6 Bus Error - * 7 R4k timer (what we use) - * - * We handle the IRQ according to _our_ priority which is: - * - * Highest ---- R4k Timer - * Local IRQ zero - * Local IRQ one - * Bus Error - * 8254 Timer zero - * Lowest ---- 8254 Timer one - * - * then we just return, if multiple IRQs are pending then we will just take - * another exception, big deal. - */ - - .text - .set noreorder - .set noat - .align 5 - NESTED(indyIRQ, PT_SIZE, sp) - SAVE_ALL - CLI - .set at - mfc0 s0, CP0_CAUSE # get irq mask - - /* First we check for r4k counter/timer IRQ. */ - andi a0, s0, CAUSEF_IP7 - beq a0, zero, 1f - andi a0, s0, CAUSEF_IP2 # delay slot, check local level zero - - /* Wheee, a timer interrupt. */ - jal indy_r4k_timer_interrupt - move a0, sp # delay slot - j ret_from_irq - nop # delay slot - -1: - beq a0, zero, 1f - andi a0, s0, CAUSEF_IP3 # delay slot, check local level one - - /* Wheee, local level zero interrupt. */ - jal indy_local0_irqdispatch - move a0, sp # delay slot - - j ret_from_irq - nop # delay slot - -1: - beq a0, zero, 1f - andi a0, s0, CAUSEF_IP6 # delay slot, check bus error - - /* Wheee, local level one interrupt. */ - jal indy_local1_irqdispatch - move a0, sp # delay slot - j ret_from_irq - nop # delay slot - -1: - beq a0, zero, 1f - andi a0, s0, (CAUSEF_IP4 | CAUSEF_IP5) # delay slot - - /* Wheee, an asynchronous bus error... */ - jal indy_buserror_irq - move a0, sp # delay slot - j ret_from_irq - nop # delay slot - -1: - /* Here by mistake? It is possible, that by the time we take - * the exception the IRQ pin goes low, so just leave if this - * is the case. - */ - beq a0, zero, 1f - nop # delay slot - - /* Must be one of the 8254 timers... */ - jal indy_8254timer_irq - move a0, sp # delay slot -1: - j ret_from_irq - nop # delay slot - END(indyIRQ) diff --git a/arch/mips/sgi-ip27/Makefile b/arch/mips/sgi-ip27/Makefile index 4ba340780c3..686ba14e288 100644 --- a/arch/mips/sgi-ip27/Makefile +++ b/arch/mips/sgi-ip27/Makefile @@ -2,7 +2,7 @@ # Makefile for the IP27 specific kernel interface routines under Linux. # -obj-y := ip27-berr.o ip27-console.o ip27-irq.o ip27-init.o ip27-irq-glue.o \ +obj-y := ip27-berr.o ip27-console.o ip27-irq.o ip27-init.o \ ip27-klconfig.o ip27-klnuma.o ip27-memory.o ip27-nmi.o ip27-reset.o \ ip27-timer.o ip27-hubio.o ip27-xtalk.o diff --git a/arch/mips/sgi-ip27/TODO b/arch/mips/sgi-ip27/TODO index 32106131b0d..19f1512c8f2 100644 --- a/arch/mips/sgi-ip27/TODO +++ b/arch/mips/sgi-ip27/TODO @@ -9,10 +9,6 @@ ip27-init.c:find_lbaord_real. DONE in irix? 6. Investigate why things do not work without the setup_test() call being invoked on all nodes in ip27-memory.c. -7. Too many CLIs in the locore handlers : -For the low level handlers set up by set_except_vector(), -__tlb_refill_debug_tramp, __xtlb_refill_debug_tramp and cacheerror, -investigate whether the code should do CLI, STI or KMODE. 8. Too many do_page_faults invoked - investigate. 9. start_thread must turn off UX64 ... and define tlb_refill_debug. 10. Need a bad pmd table, bad pte table. __bad_pmd_table/__bad_pagetable diff --git a/arch/mips/sgi-ip27/ip27-irq-glue.S b/arch/mips/sgi-ip27/ip27-irq-glue.S deleted file mode 100644 index c304df715e0..00000000000 --- a/arch/mips/sgi-ip27/ip27-irq-glue.S +++ /dev/null @@ -1,45 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 1999 Ralf Baechle - * Copyright (C) 1999 Silicon Graphics, Inc. - */ -#include -#include -#include -#include - - .text - .align 5 -NESTED(ip27_irq, PT_SIZE, sp) - SAVE_ALL - CLI - - mfc0 s0, CP0_CAUSE - mfc0 t0, CP0_STATUS - and s0, t0 - move a0, sp - PTR_LA ra, ret_from_irq - - /* First check for RT interrupt. */ - andi t0, s0, CAUSEF_IP4 - bnez t0, ip4 - andi t0, s0, CAUSEF_IP2 - bnez t0, ip2 - andi t0, s0, CAUSEF_IP3 - bnez t0, ip3 - andi t0, s0, CAUSEF_IP5 - bnez t0, ip5 - andi t0, s0, CAUSEF_IP6 - bnez t0, ip6 - j ra - -ip2: j ip27_do_irq_mask0 # PI_INT_PEND_0 or CC_PEND_{A|B} -ip3: j ip27_do_irq_mask1 # PI_INT_PEND_1 -ip4: j ip27_rt_timer_interrupt -ip5: j ip27_prof_timer -ip6: j ip27_hub_error - - END(ip27_irq) diff --git a/arch/mips/sgi-ip27/ip27-irq.c b/arch/mips/sgi-ip27/ip27-irq.c index 2854ac4c9be..2e643d2f51c 100644 --- a/arch/mips/sgi-ip27/ip27-irq.c +++ b/arch/mips/sgi-ip27/ip27-irq.c @@ -130,7 +130,7 @@ static int ms1bit(unsigned long x) * Kanoj 05.13.00 */ -void ip27_do_irq_mask0(struct pt_regs *regs) +static void ip27_do_irq_mask0(struct pt_regs *regs) { int irq, swlevel; hubreg_t pend0, mask0; @@ -171,7 +171,7 @@ void ip27_do_irq_mask0(struct pt_regs *regs) LOCAL_HUB_L(PI_INT_PEND0); } -void ip27_do_irq_mask1(struct pt_regs *regs) +static void ip27_do_irq_mask1(struct pt_regs *regs) { int irq, swlevel; hubreg_t pend1, mask1; @@ -196,12 +196,12 @@ void ip27_do_irq_mask1(struct pt_regs *regs) LOCAL_HUB_L(PI_INT_PEND1); } -void ip27_prof_timer(struct pt_regs *regs) +static void ip27_prof_timer(struct pt_regs *regs) { panic("CPU %d got a profiling interrupt", smp_processor_id()); } -void ip27_hub_error(struct pt_regs *regs) +static void ip27_hub_error(struct pt_regs *regs) { panic("CPU %d got a hub error interrupt", smp_processor_id()); } @@ -421,9 +421,26 @@ int __devinit request_bridge_irq(struct bridge_controller *bc) return irq; } +extern void ip27_rt_timer_interrupt(struct pt_regs *regs); + +asmlinkage void plat_irq_dispatch(struct pt_regs *regs) +{ + unsigned long pending = read_c0_cause() & read_c0_status(); + + if (pending & CAUSEF_IP4) + ip27_rt_timer_interrupt(regs); + else if (pending & CAUSEF_IP2) /* PI_INT_PEND_0 or CC_PEND_{A|B} */ + ip27_do_irq_mask0(regs); + else if (pending & CAUSEF_IP3) /* PI_INT_PEND_1 */ + ip27_do_irq_mask1(regs); + else if (pending & CAUSEF_IP5) + ip27_prof_timer(regs); + else if (pending & CAUSEF_IP6) + ip27_hub_error(regs); +} + void __init arch_init_irq(void) { - set_except_vector(0, ip27_irq); } void install_ipi(void) diff --git a/arch/mips/sgi-ip32/Makefile b/arch/mips/sgi-ip32/Makefile index 470898f4afe..530bf848c3d 100644 --- a/arch/mips/sgi-ip32/Makefile +++ b/arch/mips/sgi-ip32/Makefile @@ -3,7 +3,7 @@ # under Linux. # -obj-y += ip32-berr.o ip32-irq.o ip32-irq-glue.o ip32-setup.o ip32-reset.o \ +obj-y += ip32-berr.o ip32-irq.o ip32-setup.o ip32-reset.o \ crime.o ip32-memory.o EXTRA_AFLAGS := $(CFLAGS) diff --git a/arch/mips/sgi-ip32/ip32-irq-glue.S b/arch/mips/sgi-ip32/ip32-irq-glue.S deleted file mode 100644 index 200924e1c4f..00000000000 --- a/arch/mips/sgi-ip32/ip32-irq-glue.S +++ /dev/null @@ -1,86 +0,0 @@ -/* - * Low level interrupt handler for the SGI O2 aka IP32 aka Moosehead - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 2000 Harald Koerfgen - * Copyright (C) 2001 Keith M Wesolowski - */ -#include -#include -#include -#include -#include - - .text - .set noreorder - .set noat - .align 5 - NESTED(ip32_handle_int, PT_SIZE, ra) - .set noat - SAVE_ALL - CLI # TEST: interrupts should be off - .set at - .set noreorder - - mfc0 s0,CP0_CAUSE - - andi t1, s0, IE_IRQ0 - bnez t1, handle_irq0 - andi t1, s0, IE_IRQ1 - bnez t1, handle_irq1 - andi t1, s0, IE_IRQ2 - bnez t1, handle_irq2 - andi t1, s0, IE_IRQ3 - bnez t1, handle_irq3 - andi t1, s0, IE_IRQ4 - bnez t1, handle_irq4 - andi t1, s0, IE_IRQ5 - bnez t1, handle_irq5 - nop - - /* Either someone has triggered the "software interrupts" - * or we lost an interrupt somehow. Ignore it. - */ - j ret_from_irq - nop - -handle_irq0: - jal ip32_irq0 - move a0, sp - j ret_from_irq - nop - -handle_irq1: - jal ip32_irq1 - move a0, sp - j ret_from_irq - nop - -handle_irq2: - jal ip32_irq2 - move a0, sp - j ret_from_irq - nop - -handle_irq3: - jal ip32_irq3 - move a0, sp - j ret_from_irq - nop - -handle_irq4: - jal ip32_irq4 - move a0, sp - j ret_from_irq - nop - -handle_irq5: - jal ip32_irq5 - move a0, sp - j ret_from_irq - nop - - END(ip32_handle_int) diff --git a/arch/mips/sgi-ip32/ip32-irq.c b/arch/mips/sgi-ip32/ip32-irq.c index 2eb22d692ed..22a6df94b4a 100644 --- a/arch/mips/sgi-ip32/ip32-irq.c +++ b/arch/mips/sgi-ip32/ip32-irq.c @@ -130,8 +130,6 @@ struct irqaction memerr_irq = { crime_memerr_intr, SA_INTERRUPT, struct irqaction cpuerr_irq = { crime_cpuerr_intr, SA_INTERRUPT, CPU_MASK_NONE, "CRIME CPU error", NULL, NULL }; -extern void ip32_handle_int(void); - /* * For interrupts wired from a single device to the CPU. Only the clock * uses this it seems, which is IRQ 0 and IP7. @@ -503,7 +501,7 @@ static void ip32_unknown_interrupt(struct pt_regs *regs) /* CRIME 1.1 appears to deliver all interrupts to this one pin. */ /* change this to loop over all edge-triggered irqs, exception masked out ones */ -void ip32_irq0(struct pt_regs *regs) +static void ip32_irq0(struct pt_regs *regs) { uint64_t crime_int; int irq = 0; @@ -520,31 +518,49 @@ void ip32_irq0(struct pt_regs *regs) do_IRQ(irq, regs); } -void ip32_irq1(struct pt_regs *regs) +static void ip32_irq1(struct pt_regs *regs) { ip32_unknown_interrupt(regs); } -void ip32_irq2(struct pt_regs *regs) +static void ip32_irq2(struct pt_regs *regs) { ip32_unknown_interrupt(regs); } -void ip32_irq3(struct pt_regs *regs) +static void ip32_irq3(struct pt_regs *regs) { ip32_unknown_interrupt(regs); } -void ip32_irq4(struct pt_regs *regs) +static void ip32_irq4(struct pt_regs *regs) { ip32_unknown_interrupt(regs); } -void ip32_irq5(struct pt_regs *regs) +static void ip32_irq5(struct pt_regs *regs) { ll_timer_interrupt(IP32_R4K_TIMER_IRQ, regs); } +asmlinkage void plat_irq_dispatch(struct pt_regs *regs) +{ + unsigned int pending = read_c0_cause(); + + if (likely(pending & IE_IRQ0)) + ip32_irq0(regs); + else if (unlikely(pending & IE_IRQ1)) + ip32_irq1(regs); + else if (unlikely(pending & IE_IRQ2)) + ip32_irq2(regs); + else if (unlikely(pending & IE_IRQ3)) + ip32_irq3(regs); + else if (unlikely(pending & IE_IRQ4)) + ip32_irq4(regs); + else if (likely(pending & IE_IRQ5)) + ip32_irq5(regs); +} + void __init arch_init_irq(void) { unsigned int irq; @@ -556,7 +572,6 @@ void __init arch_init_irq(void) crime->soft_int = 0; mace->perif.ctrl.istat = 0; mace->perif.ctrl.imask = 0; - set_except_vector(0, ip32_handle_int); for (irq = 0; irq <= IP32_IRQ_MAX; irq++) { hw_irq_controller *controller; diff --git a/arch/mips/sibyte/bcm1480/Makefile b/arch/mips/sibyte/bcm1480/Makefile index 538d5a51ae9..7b36ff3873b 100644 --- a/arch/mips/sibyte/bcm1480/Makefile +++ b/arch/mips/sibyte/bcm1480/Makefile @@ -1,4 +1,4 @@ -obj-y := setup.o irq.o irq_handler.o time.o +obj-y := setup.o irq.o time.o obj-$(CONFIG_SMP) += smp.o diff --git a/arch/mips/sibyte/bcm1480/irq.c b/arch/mips/sibyte/bcm1480/irq.c index 9cf7d713b13..e61760b14d9 100644 --- a/arch/mips/sibyte/bcm1480/irq.c +++ b/arch/mips/sibyte/bcm1480/irq.c @@ -187,9 +187,6 @@ static void bcm1480_set_affinity(unsigned int irq, cpumask_t mask) #endif -/* Defined in arch/mips/sibyte/bcm1480/irq_handler.S */ -extern void bcm1480_irq_handler(void); - /*****************************************************************************/ static unsigned int startup_bcm1480_irq(unsigned int irq) @@ -422,7 +419,6 @@ void __init arch_init_irq(void) #endif /* Enable necessary IPs, disable the rest */ change_c0_status(ST0_IM, imask); - set_except_vector(0, bcm1480_irq_handler); #ifdef CONFIG_KGDB if (kgdb_flag) { @@ -473,3 +469,76 @@ void bcm1480_kgdb_interrupt(struct pt_regs *regs) } #endif /* CONFIG_KGDB */ + +static inline int dclz(unsigned long long x) +{ + int lz; + + __asm__ ( + " .set push \n" + " .set mips64 \n" + " dclz %0, %1 \n" + " .set pop \n" + : "=r" (lz) + : "r" (x)); + + return lz; +} + +extern void bcm1480_timer_interrupt(struct pt_regs *regs); +extern void bcm1480_mailbox_interrupt(struct pt_regs *regs); +extern void bcm1480_kgdb_interrupt(struct pt_regs *regs); + +asmlinkage void plat_irq_dispatch(struct pt_regs *regs) +{ + unsigned int pending; + +#ifdef CONFIG_SIBYTE_BCM1480_PROF + /* Set compare to count to silence count/compare timer interrupts */ + write_c0_compare(read_c0_count()); +#endif + + pending = read_c0_cause(); + +#ifdef CONFIG_SIBYTE_BCM1480_PROF + if (pending & CAUSEF_IP7) /* Cpu performance counter interrupt */ + sbprof_cpu_intr(exception_epc(regs)); +#endif + + if (pending & CAUSEF_IP4) + bcm1480_timer_interrupt(regs); + +#ifdef CONFIG_SMP + if (pending & CAUSEF_IP3) + bcm1480_mailbox_interrupt(regs); +#endif + +#ifdef CONFIG_KGDB + if (pending & CAUSEF_IP6) + bcm1480_kgdb_interrupt(regs); /* KGDB (uart 1) */ +#endif + + if (pending & CAUSEF_IP2) { + unsigned long long mask_h, mask_l; + unsigned long base; + + /* + * Default...we've hit an IP[2] interrupt, which means we've + * got to check the 1480 interrupt registers to figure out what + * to do. Need to detect which CPU we're on, now that + * smp_affinity is supported. + */ + base = A_BCM1480_IMR_MAPPER(smp_processor_id()); + mask_h = __raw_readq( + IOADDR(base + R_BCM1480_IMR_INTERRUPT_STATUS_BASE_H)); + mask_l = __raw_readq( + IOADDR(base + R_BCM1480_IMR_INTERRUPT_STATUS_BASE_L)); + + if (!mask_h) { + if (mask_h ^ 1) + do_IRQ(63 - dclz(mask_h), regs); + else + do_IRQ(127 - dclz(mask_l), regs); + } + } +} diff --git a/arch/mips/sibyte/bcm1480/irq_handler.S b/arch/mips/sibyte/bcm1480/irq_handler.S deleted file mode 100644 index 408db88d050..00000000000 --- a/arch/mips/sibyte/bcm1480/irq_handler.S +++ /dev/null @@ -1,165 +0,0 @@ -/* - * Copyright (C) 2000,2001,2002,2003,2004 Broadcom Corporation - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version 2 - * of the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. - */ - -/* - * bcm1480_irq_handler() is the routine that is actually called when an - * interrupt occurs. It is installed as the exception vector handler in - * init_IRQ() in arch/mips/sibyte/bcm1480/irq.c - * - * In the handle we figure out which interrupts need handling, and use that - * to call the dispatcher, which will take care of actually calling - * registered handlers - * - * Note that we take care of all raised interrupts in one go at the handler. - * This is more BSDish than the Indy code, and also, IMHO, more sane. - */ -#include - -#include -#include -#include -#include -#include -#include -#include -#include - -/* - * What a pain. We have to be really careful saving the upper 32 bits of any - * register across function calls if we don't want them trashed--since were - * running in -o32, the calling routing never saves the full 64 bits of a - * register across a function call. Being the interrupt handler, we're - * guaranteed that interrupts are disabled during this code so we don't have - * to worry about random interrupts blasting the high 32 bits. - */ - - .text - .set push - .set noreorder - .set noat - .set mips64 - #.set mips4 - .align 5 - NESTED(bcm1480_irq_handler, PT_SIZE, sp) - SAVE_ALL - CLI - -#ifdef CONFIG_SIBYTE_BCM1480_PROF - /* Set compare to count to silence count/compare timer interrupts */ - mfc0 t1, CP0_COUNT - mtc0 t1, CP0_COMPARE /* pause to clear IP[7] bit of cause ? */ -#endif - /* Read cause */ - mfc0 s0, CP0_CAUSE - -#ifdef CONFIG_SIBYTE_BCM1480_PROF - /* Cpu performance counter interrupt is routed to IP[7] */ - andi t1, s0, CAUSEF_IP7 - beqz t1, 0f - srl t1, s0, (CAUSEB_BD-2) /* Shift BD bit to bit 2 */ - and t1, t1, 0x4 /* mask to get just BD bit */ -#ifdef CONFIG_MIPS64 - dmfc0 a0, CP0_EPC - daddu a0, a0, t1 /* a0 = EPC + (BD ? 4 : 0) */ -#else - mfc0 a0, CP0_EPC - addu a0, a0, t1 /* a0 = EPC + (BD ? 4 : 0) */ -#endif - jal sbprof_cpu_intr - nop - j ret_from_irq - nop -0: -#endif - - /* Timer interrupt is routed to IP[4] */ - andi t1, s0, CAUSEF_IP4 - beqz t1, 1f - nop - jal bcm1480_timer_interrupt - move a0, sp /* Pass the registers along */ - j ret_from_irq - nop /* delay slot */ -1: - -#ifdef CONFIG_SMP - /* Mailbox interrupt is routed to IP[3] */ - andi t1, s0, CAUSEF_IP3 - beqz t1, 2f - nop - jal bcm1480_mailbox_interrupt - move a0, sp - j ret_from_irq - nop /* delay slot */ -2: -#endif - -#ifdef CONFIG_KGDB - /* KGDB (uart 1) interrupt is routed to IP[6] */ - andi t1, s0, CAUSEF_IP6 - beqz t1, 3f - nop /* delay slot */ - jal bcm1480_kgdb_interrupt - move a0, sp - j ret_from_irq - nop /* delay slot */ -3: -#endif - - and t1, s0, CAUSEF_IP2 - beqz t1, 9f - nop - - /* - * Default...we've hit an IP[2] interrupt, which means we've got - * to check the 1480 interrupt registers to figure out what to do - * Need to detect which CPU we're on, now that smp_affinity is - * supported. - */ - PTR_LA v0, CKSEG1 + A_BCM1480_IMR_CPU0_BASE -#ifdef CONFIG_SMP - lw t1, TI_CPU($28) - sll t1, t1, BCM1480_IMR_REGISTER_SPACING_SHIFT - addu v0, v0, t1 -#endif - - /* Read IP[2] status (get both high and low halves of status) */ - ld s0, R_BCM1480_IMR_INTERRUPT_STATUS_BASE_H(v0) - ld s1, R_BCM1480_IMR_INTERRUPT_STATUS_BASE_L(v0) - - move s2, zero /* intr number */ - li s3, 64 - - beqz s0, 9f /* No interrupts. Return. */ - move a1, sp - - xori s4, s0, 1 /* if s0 (_H) == 1, it's a low intr, so... */ - movz s2, s3, s4 /* start the intr number at 64, and */ - movz s0, s1, s4 /* look at the low status value. */ - - dclz s1, s0 /* Find the next interrupt. */ - dsubu a0, zero, s1 - daddiu a0, a0, 63 - jal do_IRQ - daddu a0, a0, s2 - -9: j ret_from_irq - nop - - .set pop - END(bcm1480_irq_handler) diff --git a/arch/mips/sibyte/sb1250/Makefile b/arch/mips/sibyte/sb1250/Makefile index a8af8469758..a2fdbd62f8a 100644 --- a/arch/mips/sibyte/sb1250/Makefile +++ b/arch/mips/sibyte/sb1250/Makefile @@ -1,4 +1,4 @@ -obj-y := setup.o irq.o irq_handler.o time.o +obj-y := setup.o irq.o time.o obj-$(CONFIG_SMP) += smp.o obj-$(CONFIG_SIBYTE_TBPROF) += bcm1250_tbprof.o diff --git a/arch/mips/sibyte/sb1250/irq.c b/arch/mips/sibyte/sb1250/irq.c index 589537bfcc3..0f6e54db488 100644 --- a/arch/mips/sibyte/sb1250/irq.c +++ b/arch/mips/sibyte/sb1250/irq.c @@ -163,10 +163,6 @@ static void sb1250_set_affinity(unsigned int irq, cpumask_t mask) } #endif - -/* Defined in arch/mips/sibyte/sb1250/irq_handler.S */ -extern void sb1250_irq_handler(void); - /*****************************************************************************/ static unsigned int startup_sb1250_irq(unsigned int irq) @@ -379,7 +375,6 @@ void __init arch_init_irq(void) #endif /* Enable necessary IPs, disable the rest */ change_c0_status(ST0_IM, imask); - set_except_vector(0, sb1250_irq_handler); #ifdef CONFIG_KGDB if (kgdb_flag) { @@ -409,7 +404,7 @@ void __init arch_init_irq(void) #define duart_out(reg, val) csr_out32(val, IOADDR(A_DUART_CHANREG(kgdb_port,reg))) #define duart_in(reg) csr_in32(IOADDR(A_DUART_CHANREG(kgdb_port,reg))) -void sb1250_kgdb_interrupt(struct pt_regs *regs) +static void sb1250_kgdb_interrupt(struct pt_regs *regs) { /* * Clear break-change status (allow some time for the remote @@ -424,3 +419,74 @@ void sb1250_kgdb_interrupt(struct pt_regs *regs) } #endif /* CONFIG_KGDB */ + +static inline int dclz(unsigned long long x) +{ + int lz; + + __asm__ ( + " .set push \n" + " .set mips64 \n" + " dclz %0, %1 \n" + " .set pop \n" + : "=r" (lz) + : "r" (x)); + + return lz; +} + +asmlinkage void plat_irq_dispatch(struct pt_regs *regs) +{ + unsigned int pending; + +#ifdef CONFIG_SIBYTE_SB1250_PROF + /* Set compare to count to silence count/compare timer interrupts */ + write_c0_count(read_c0_count()); +#endif + + /* + * What a pain. We have to be really careful saving the upper 32 bits + * of any * register across function calls if we don't want them + * trashed--since were running in -o32, the calling routing never saves + * the full 64 bits of a register across a function call. Being the + * interrupt handler, we're guaranteed that interrupts are disabled + * during this code so we don't have to worry about random interrupts + * blasting the high 32 bits. + */ + + pending = read_c0_cause(); + +#ifdef CONFIG_SIBYTE_SB1250_PROF + if (pending & CAUSEF_IP7) { /* Cpu performance counter interrupt */ + sbprof_cpu_intr(exception_epc(regs)); + } +#endif + + if (pending & CAUSEF_IP4) + sb1250_timer_interrupt(regs); + +#ifdef CONFIG_SMP + if (pending & CAUSEF_IP3) + sb1250_mailbox_interrupt(regs); +#endif + +#ifdef CONFIG_KGDB + if (pending & CAUSEF_IP6) /* KGDB (uart 1) */ + sb1250_kgdb_interrupt(regs); +#endif + + if (pending & CAUSEF_IP2) { + unsigned long long mask; + + /* + * Default...we've hit an IP[2] interrupt, which means we've + * got to check the 1250 interrupt registers to figure out what + * to do. Need to detect which CPU we're on, now that + ~ smp_affinity is supported. + */ + mask = __raw_readq(IOADDR(A_IMR_REGISTER(smp_processor_id(), + R_IMR_INTERRUPT_STATUS_BASE))); + if (mask) + do_IRQ(63 - dclz(mask), regs); + } +} diff --git a/arch/mips/sibyte/sb1250/irq_handler.S b/arch/mips/sibyte/sb1250/irq_handler.S deleted file mode 100644 index 60edc8fb302..00000000000 --- a/arch/mips/sibyte/sb1250/irq_handler.S +++ /dev/null @@ -1,147 +0,0 @@ -/* - * Copyright (C) 2000, 2001, 2002, 2003 Broadcom Corporation - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version 2 - * of the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. - */ - -/* - * sb1250_handle_int() is the routine that is actually called when an interrupt - * occurs. It is installed as the exception vector handler in arch_init_irq() - * in arch/mips/sibyte/sb1250/irq.c - * - * In the handle we figure out which interrupts need handling, and use that to - * call the dispatcher, which will take care of actually calling registered - * handlers - * - * Note that we take care of all raised interrupts in one go at the handler. - * This is more BSDish than the Indy code, and also, IMHO, more sane. - */ -#include - -#include -#include -#include -#include -#include -#include -#include -#include - -/* - * What a pain. We have to be really careful saving the upper 32 bits of any - * register across function calls if we don't want them trashed--since were - * running in -o32, the calling routing never saves the full 64 bits of a - * register across a function call. Being the interrupt handler, we're - * guaranteed that interrupts are disabled during this code so we don't have - * to worry about random interrupts blasting the high 32 bits. - */ - - .text - .set push - .set noreorder - .set noat - .set mips64 - .align 5 - NESTED(sb1250_irq_handler, PT_SIZE, sp) - SAVE_ALL - CLI - -#ifdef CONFIG_SIBYTE_SB1250_PROF - /* Set compare to count to silence count/compare timer interrupts */ - mfc0 t1, CP0_COUNT - mtc0 t1, CP0_COMPARE /* pause to clear IP[7] bit of cause ? */ -#endif - /* Read cause */ - mfc0 s0, CP0_CAUSE - -#ifdef CONFIG_SIBYTE_SB1250_PROF - /* Cpu performance counter interrupt is routed to IP[7] */ - andi t1, s0, CAUSEF_IP7 - beqz t1, 0f - srl t1, s0, (CAUSEB_BD-2) /* Shift BD bit to bit 2 */ - and t1, t1, 0x4 /* mask to get just BD bit */ - mfc0 a0, CP0_EPC - jal sbprof_cpu_intr - addu a0, a0, t1 /* a0 = EPC + (BD ? 4 : 0) */ - j ret_from_irq - nop -0: -#endif - - /* Timer interrupt is routed to IP[4] */ - andi t1, s0, CAUSEF_IP4 - beqz t1, 1f - nop - jal sb1250_timer_interrupt - move a0, sp /* Pass the registers along */ - j ret_from_irq - nop # delay slot -1: - -#ifdef CONFIG_SMP - /* Mailbox interrupt is routed to IP[3] */ - andi t1, s0, CAUSEF_IP3 - beqz t1, 2f - nop - jal sb1250_mailbox_interrupt - move a0, sp - j ret_from_irq - nop # delay slot -2: -#endif - -#ifdef CONFIG_KGDB - /* KGDB (uart 1) interrupt is routed to IP[6] */ - andi t1, s0, CAUSEF_IP6 - beqz t1, 1f - nop # delay slot - jal sb1250_kgdb_interrupt - move a0, sp - j ret_from_irq - nop # delay slot -1: -#endif - - and t1, s0, CAUSEF_IP2 - beqz t1, 4f - nop - - /* - * Default...we've hit an IP[2] interrupt, which means we've got to - * check the 1250 interrupt registers to figure out what to do - * Need to detect which CPU we're on, now that smp_affinity is supported. - */ - PTR_LA v0, CKSEG1 + A_IMR_CPU0_BASE -#ifdef CONFIG_SMP - lw t1, TI_CPU($28) - sll t1, IMR_REGISTER_SPACING_SHIFT - addu v0, t1 -#endif - ld s0, R_IMR_INTERRUPT_STATUS_BASE(v0) /* read IP[2] status */ - - beqz s0, 4f /* No interrupts. Return */ - move a1, sp - -3: dclz s1, s0 /* Find the next interrupt */ - dsubu a0, zero, s1 - daddiu a0, a0, 63 - jal do_IRQ - nop - -4: j ret_from_irq - nop - - .set pop - END(sb1250_irq_handler) diff --git a/arch/mips/sni/Makefile b/arch/mips/sni/Makefile index 1e5676e4be8..9c7eaa5fb21 100644 --- a/arch/mips/sni/Makefile +++ b/arch/mips/sni/Makefile @@ -2,6 +2,6 @@ # Makefile for the SNI specific part of the kernel # -obj-y += int-handler.o irq.o pcimt_scache.o reset.o setup.o +obj-y += irq.o pcimt_scache.o reset.o setup.o EXTRA_AFLAGS := $(CFLAGS) diff --git a/arch/mips/sni/int-handler.S b/arch/mips/sni/int-handler.S deleted file mode 100644 index 2cdc09f55f1..00000000000 --- a/arch/mips/sni/int-handler.S +++ /dev/null @@ -1,106 +0,0 @@ -/* - * SNI RM200 PCI specific interrupt handler code. - * - * Copyright (C) 1994, 95, 96, 97, 98, 1999, 2000, 01 by Ralf Baechle - */ -#include -#include -#include -#include -#include - -/* - * The PCI ASIC has the nasty property that it may delay writes if it is busy. - * As a consequence from writes that have not graduated when we exit from the - * interrupt handler we might catch a spurious interrupt. To avoid this we - * force the PCI ASIC to graduate all writes by executing a read from the - * PCI bus. - */ - .set noreorder - .set noat - .align 5 - NESTED(sni_rm200_pci_handle_int, PT_SIZE, sp) - SAVE_ALL - CLI - .set at - - /* Blinken light ... */ - lb t0, led_cache - addiu t0, 1 - sb t0, led_cache - sb t0, PCIMT_CSLED # write only register - .data -led_cache: .byte 0 - .text - - mfc0 t0, CP0_STATUS - mfc0 t1, CP0_CAUSE - and t0, t1 - - andi t1, t0, 0x0800 # hardware interrupt 1 - bnez t1, _hwint1 - andi t1, t0, 0x4000 # hardware interrupt 4 - bnez t1, _hwint4 - andi t1, t0, 0x2000 # hardware interrupt 3 - bnez t1, _hwint3 - andi t1, t0, 0x1000 # hardware interrupt 2 - bnez t1, _hwint2 - andi t1, t0, 0x8000 # hardware interrupt 5 - bnez t1, _hwint5 - andi t1, t0, 0x0400 # hardware interrupt 0 - bnez t1, _hwint0 - nop - - j restore_all # spurious interrupt - nop - - ############################################################################## - -/* hwint0 should deal with MP agent, ASIC PCI, EISA NMI and debug - button interrupts. */ -_hwint0: jal pciasic_hwint0 - move a0, sp - j ret_from_irq - nop - -/* - * hwint 1 deals with EISA and SCSI interrupts - */ -_hwint1: jal pciasic_hwint1 - move a0, sp - j ret_from_irq - nop - - -/* - * This interrupt was used for the com1 console on the first prototypes; - * it's unsed otherwise - */ -_hwint2: jal pciasic_hwint2 - move a0, sp - j ret_from_irq - nop - -/* - * hwint 3 are the PCI interrupts A - D - */ -_hwint3: jal pciasic_hwint3 - move a0, sp - j ret_from_irq - nop - -/* - * hwint 4 is used for only the onboard PCnet 32. - */ -_hwint4: jal pciasic_hwint4 - move a0, sp - j ret_from_irq - nop - -/* hwint5 is the r4k count / compare interrupt */ -_hwint5: jal pciasic_hwint5 - move a0, sp - j ret_from_irq - nop - - END(sni_rm200_pci_handle_int) diff --git a/arch/mips/sni/irq.c b/arch/mips/sni/irq.c index 952038aa4b9..7365b4853dd 100644 --- a/arch/mips/sni/irq.c +++ b/arch/mips/sni/irq.c @@ -19,8 +19,6 @@ DEFINE_SPINLOCK(pciasic_lock); -extern asmlinkage void sni_rm200_pci_handle_int(void); - static void enable_pciasic_irq(unsigned int irq) { unsigned int mask = 1 << (irq - PCIMT_IRQ_INT2); @@ -71,20 +69,20 @@ static struct hw_interrupt_type pciasic_irq_type = { * hwint0 should deal with MP agent, ASIC PCI, EISA NMI and debug * button interrupts. Later ... */ -void pciasic_hwint0(struct pt_regs *regs) +static void pciasic_hwint0(struct pt_regs *regs) { panic("Received int0 but no handler yet ..."); } /* This interrupt was used for the com1 console on the first prototypes. */ -void pciasic_hwint2(struct pt_regs *regs) +static void pciasic_hwint2(struct pt_regs *regs) { /* I think this shouldn't happen on production machines. */ panic("hwint2 and no handler yet"); } /* hwint5 is the r4k count / compare interrupt */ -void pciasic_hwint5(struct pt_regs *regs) +static void pciasic_hwint5(struct pt_regs *regs) { panic("hwint5 and no handler yet"); } @@ -105,7 +103,7 @@ static unsigned int ls1bit8(unsigned int x) * * The EISA_INT bit in CSITPEND is high active, all others are low active. */ -void pciasic_hwint1(struct pt_regs *regs) +static void pciasic_hwint1(struct pt_regs *regs) { u8 pend = *(volatile char *)PCIMT_CSITPEND; unsigned long flags; @@ -135,7 +133,7 @@ void pciasic_hwint1(struct pt_regs *regs) /* * hwint 3 should deal with the PCI A - D interrupts, */ -void pciasic_hwint3(struct pt_regs *regs) +static void pciasic_hwint3(struct pt_regs *regs) { u8 pend = *(volatile char *)PCIMT_CSITPEND; int irq; @@ -150,13 +148,34 @@ void pciasic_hwint3(struct pt_regs *regs) /* * hwint 4 is used for only the onboard PCnet 32. */ -void pciasic_hwint4(struct pt_regs *regs) +static void pciasic_hwint4(struct pt_regs *regs) { clear_c0_status(IE_IRQ4); do_IRQ(PCIMT_IRQ_ETHERNET, regs); set_c0_status(IE_IRQ4); } +asmlinkage void plat_irq_dispatch(struct pt_regs *regs) +{ + unsigned int pending = read_c0_status() & read_c0_cause(); + static unsigned char led_cache; + + *(volatile unsigned char *) PCIMT_CSLED = ++led_cache; + + if (pending & 0x0800) + pciasic_hwint1(regs); + else if (pending & 0x4000) + pciasic_hwint4(regs); + else if (pending & 0x2000) + pciasic_hwint3(regs); + else if (pending & 0x1000) + pciasic_hwint2(regs); + else if (pending & 0x8000) + pciasic_hwint5(regs); + else if (pending & 0x0400) + pciasic_hwint0(regs); +} + void __init init_pciasic(void) { unsigned long flags; @@ -176,8 +195,6 @@ void __init arch_init_irq(void) { int i; - set_except_vector(0, sni_rm200_pci_handle_int); - init_i8259_irqs(); /* Integrated i8259 */ init_pciasic(); diff --git a/arch/mips/tx4927/common/Makefile b/arch/mips/tx4927/common/Makefile index 8fa126b296e..9cb9535ebac 100644 --- a/arch/mips/tx4927/common/Makefile +++ b/arch/mips/tx4927/common/Makefile @@ -6,7 +6,7 @@ # unless it's something special (ie not a .c file). # -obj-y += tx4927_prom.o tx4927_setup.o tx4927_irq.o tx4927_irq_handler.o +obj-y += tx4927_prom.o tx4927_setup.o tx4927_irq.o obj-$(CONFIG_TOSHIBA_FPCIB0) += smsc_fdc37m81x.o obj-$(CONFIG_KGDB) += tx4927_dbgio.o diff --git a/arch/mips/tx4927/common/tx4927_irq.c b/arch/mips/tx4927/common/tx4927_irq.c index 5ab2e2b7601..8ca68015cf4 100644 --- a/arch/mips/tx4927/common/tx4927_irq.c +++ b/arch/mips/tx4927/common/tx4927_irq.c @@ -525,8 +525,6 @@ static void tx4927_irq_pic_end(unsigned int irq) */ void __init tx4927_irq_init(void) { - extern asmlinkage void tx4927_irq_handler(void); - TX4927_IRQ_DPRINTK(TX4927_IRQ_INIT, "-\n"); TX4927_IRQ_DPRINTK(TX4927_IRQ_INIT, "=Calling tx4927_irq_cp0_init()\n"); @@ -535,16 +533,12 @@ void __init tx4927_irq_init(void) TX4927_IRQ_DPRINTK(TX4927_IRQ_INIT, "=Calling tx4927_irq_pic_init()\n"); tx4927_irq_pic_init(); - TX4927_IRQ_DPRINTK(TX4927_IRQ_INIT, - "=Calling set_except_vector(tx4927_irq_handler)\n"); - set_except_vector(0, tx4927_irq_handler); - TX4927_IRQ_DPRINTK(TX4927_IRQ_INIT, "+\n"); return; } -int tx4927_irq_nested(void) +static int tx4927_irq_nested(void) { int sw_irq = 0; u32 level2; @@ -582,3 +576,25 @@ int tx4927_irq_nested(void) return (sw_irq); } + +asmlinkage void plat_irq_dispatch(struct pt_regs *regs) +{ + unsigned int pending = read_c0_status() & read_c0_cause(); + + if (pending & STATUSF_IP7) /* cpu timer */ + do_IRQ(TX4927_IRQ_CPU_TIMER, regs); + else if (pending & STATUSF_IP2) { /* tx4927 pic */ + unsigned int irq = tx4927_irq_nested(); + + if (unlikely(irq == 0)) { + spurious_interrupt(regs); + return; + } + do_IRQ(irq, regs); + } else if (pending & STATUSF_IP0) /* user line 0 */ + do_IRQ(TX4927_IRQ_USER0, regs); + else if (pending & STATUSF_IP1) /* user line 1 */ + do_IRQ(TX4927_IRQ_USER1, regs); + else + spurious_interrupt(regs); +} diff --git a/arch/mips/tx4927/common/tx4927_irq_handler.S b/arch/mips/tx4927/common/tx4927_irq_handler.S deleted file mode 100644 index 0b2ea02574f..00000000000 --- a/arch/mips/tx4927/common/tx4927_irq_handler.S +++ /dev/null @@ -1,104 +0,0 @@ -/* - * linux/arch/mips/tx4927/common/tx4927_irq_handler.S - * - * Primary interrupt handler for tx4927 based systems - * - * Author: MontaVista Software, Inc. - * Author: jsun@mvista.com or jsun@junsun.net - * source@mvista.com - * - * Copyright 2001-2002 MontaVista Software Inc. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. - * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, - * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS - * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND - * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR - * TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE - * USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 675 Mass Ave, Cambridge, MA 02139, USA. - */ -#include -#include -#include -#include -#include -#include - - .align 5 - NESTED(tx4927_irq_handler, PT_SIZE, sp) - SAVE_ALL - CLI - .set at - - mfc0 t0, CP0_CAUSE - mfc0 t1, CP0_STATUS - and t0, t1 - - andi t1, t0, STATUSF_IP7 /* cpu timer */ - bnez t1, ll_ip7 - - /* IP6..IP3 multiplexed -- do not use */ - - andi t1, t0, STATUSF_IP2 /* tx4927 pic */ - bnez t1, ll_ip2 - - andi t1, t0, STATUSF_IP0 /* user line 0 */ - bnez t1, ll_ip0 - - andi t1, t0, STATUSF_IP1 /* user line 1 */ - bnez t1, ll_ip1 - - .set reorder - - /* wrong alarm or masked ... */ - jal spurious_interrupt - nop - j ret_from_irq - END(tx4927_irq_handler) - - .align 5 - - -ll_ip7: - li a0, TX4927_IRQ_CPU_TIMER - move a1, sp - jal do_IRQ - j ret_from_irq - -ll_ip2: - jal tx4927_irq_nested - nop - beqz v0, goto_spurious_interrupt - nop - move a0, v0 - move a1, sp - jal do_IRQ - j ret_from_irq - -goto_spurious_interrupt: - j spurious_interrupt - nop - -ll_ip1: - li a0, TX4927_IRQ_USER1 - move a1, sp - jal do_IRQ - j ret_from_irq - -ll_ip0: - li a0, TX4927_IRQ_USER0 - move a1, sp - jal do_IRQ - j ret_from_irq diff --git a/arch/mips/tx4938/common/Makefile b/arch/mips/tx4938/common/Makefile index 74c95c5bcdb..2033ae77f63 100644 --- a/arch/mips/tx4938/common/Makefile +++ b/arch/mips/tx4938/common/Makefile @@ -6,6 +6,6 @@ # unless it's something special (ie not a .c file). # -obj-y += prom.o setup.o irq.o irq_handler.o rtc_rx5c348.o +obj-y += prom.o setup.o irq.o rtc_rx5c348.o obj-$(CONFIG_KGDB) += dbgio.o diff --git a/arch/mips/tx4938/common/irq.c b/arch/mips/tx4938/common/irq.c index 4f90d7faf63..873805178d8 100644 --- a/arch/mips/tx4938/common/irq.c +++ b/arch/mips/tx4938/common/irq.c @@ -392,11 +392,8 @@ tx4938_irq_pic_end(unsigned int irq) void __init tx4938_irq_init(void) { - extern asmlinkage void tx4938_irq_handler(void); - tx4938_irq_cp0_init(); tx4938_irq_pic_init(); - set_except_vector(0, tx4938_irq_handler); return; } @@ -422,3 +419,21 @@ tx4938_irq_nested(void) wbflush(); return (sw_irq); } + +asmlinkage void plat_irq_dispatch(struct pt_regs *regs) +{ + unsigned int pending = read_c0_cause() & read_c0_status(); + + if (pending & STATUSF_IP7) + do_IRQ(TX4938_IRQ_CPU_TIMER, regs); + else if (pending & STATUSF_IP2) { + int irq = tx4938_irq_nested(); + if (irq) + do_IRQ(irq, regs); + else + spurious_interrupt(regs); + } else if (pending & STATUSF_IP1) + do_IRQ(TX4938_IRQ_USER1, regs); + else if (pending & STATUSF_IP0) + do_IRQ(TX4938_IRQ_USER0, regs); +} diff --git a/arch/mips/tx4938/common/irq_handler.S b/arch/mips/tx4938/common/irq_handler.S deleted file mode 100644 index 1b2f72bac42..00000000000 --- a/arch/mips/tx4938/common/irq_handler.S +++ /dev/null @@ -1,84 +0,0 @@ -/* - * linux/arch/mips/tx4938/common/handler.S - * - * Primary interrupt handler for tx4938 based systems - * Copyright (C) 2000-2001 Toshiba Corporation - * - * 2003-2005 (c) MontaVista Software, Inc. This file is licensed under the - * terms of the GNU General Public License version 2. This program is - * licensed "as is" without any warranty of any kind, whether express - * or implied. - * - * Support for TX4938 in 2.6 - Manish Lachwani (mlachwani@mvista.com) - */ -#include -#include -#include -#include -#include -#include - - - .align 5 - NESTED(tx4938_irq_handler, PT_SIZE, sp) - SAVE_ALL - CLI - .set at - - mfc0 t0, CP0_CAUSE - mfc0 t1, CP0_STATUS - and t0, t1 - - andi t1, t0, STATUSF_IP7 /* cpu timer */ - bnez t1, ll_ip7 - - /* IP6..IP3 multiplexed -- do not use */ - - andi t1, t0, STATUSF_IP2 /* tx4938 pic */ - bnez t1, ll_ip2 - - andi t1, t0, STATUSF_IP1 /* user line 1 */ - bnez t1, ll_ip1 - - andi t1, t0, STATUSF_IP0 /* user line 0 */ - bnez t1, ll_ip0 - - .set reorder - - nop - END(tx4938_irq_handler) - - .align 5 - - -ll_ip7: - li a0, TX4938_IRQ_CPU_TIMER - move a1, sp - jal do_IRQ - j ret_from_irq - - -ll_ip2: - jal tx4938_irq_nested - nop - beqz v0, goto_spurious_interrupt - nop - move a0, v0 - move a1, sp - jal do_IRQ - j ret_from_irq - -goto_spurious_interrupt: - j ret_from_irq - -ll_ip1: - li a0, TX4938_IRQ_USER1 - move a1, sp - jal do_IRQ - j ret_from_irq - -ll_ip0: - li a0, TX4938_IRQ_USER0 - move a1, sp - jal do_IRQ - j ret_from_irq diff --git a/arch/mips/vr41xx/common/Makefile b/arch/mips/vr41xx/common/Makefile index 9096302a7ec..aa373974c80 100644 --- a/arch/mips/vr41xx/common/Makefile +++ b/arch/mips/vr41xx/common/Makefile @@ -2,7 +2,7 @@ # Makefile for common code of the NEC VR4100 series. # -obj-y += bcu.o cmu.o icu.o init.o int-handler.o irq.o pmu.o type.o +obj-y += bcu.o cmu.o icu.o init.o irq.o pmu.o type.o obj-$(CONFIG_VRC4173) += vrc4173.o EXTRA_AFLAGS := $(CFLAGS) diff --git a/arch/mips/vr41xx/common/int-handler.S b/arch/mips/vr41xx/common/int-handler.S deleted file mode 100644 index e8652348fef..00000000000 --- a/arch/mips/vr41xx/common/int-handler.S +++ /dev/null @@ -1,116 +0,0 @@ -/* - * FILE NAME - * arch/mips/vr41xx/common/int-handler.S - * - * BRIEF MODULE DESCRIPTION - * Interrupt dispatcher for the NEC VR4100 series. - * - * Author: Yoichi Yuasa - * yyuasa@mvista.com or source@mvista.com - * - * Copyright 2001 MontaVista Software Inc. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. - * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, - * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS - * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND - * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR - * TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE - * USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 675 Mass Ave, Cambridge, MA 02139, USA. - */ -/* - * Changes: - * MontaVista Software Inc. or - * - New creation, NEC VR4100 series are supported. - * - * Yoichi Yuasa - * - Coped with INTASSIGN of NEC VR4133. - */ -#include -#include -#include -#include - - .text - .set noreorder - - .align 5 - NESTED(vr41xx_handle_interrupt, PT_SIZE, ra) - .set noat - SAVE_ALL - CLI - .set at - .set noreorder - - /* - * Get the pending interrupts - */ - mfc0 t0, CP0_CAUSE - mfc0 t1, CP0_STATUS - andi t0, 0xff00 - and t0, t0, t1 - - andi t1, t0, CAUSEF_IP7 # MIPS timer interrupt - bnez t1, handle_irq - li a0, 7 - - andi t1, t0, 0x7800 # check for Int1-4 - beqz t1, 1f - - andi t1, t0, CAUSEF_IP3 # check for Int1 - bnez t1, handle_int - li a0, 3 - - andi t1, t0, CAUSEF_IP4 # check for Int2 - bnez t1, handle_int - li a0, 4 - - andi t1, t0, CAUSEF_IP5 # check for Int3 - bnez t1, handle_int - li a0, 5 - - andi t1, t0, CAUSEF_IP6 # check for Int4 - bnez t1, handle_int - li a0, 6 - -1: - andi t1, t0, CAUSEF_IP2 # check for Int0 - bnez t1, handle_int - li a0, 2 - - andi t1, t0, CAUSEF_IP0 # check for IP0 - bnez t1, handle_irq - li a0, 0 - - andi t1, t0, CAUSEF_IP1 # check for IP1 - bnez t1, handle_irq - li a0, 1 - - jal spurious_interrupt - nop - j ret_from_irq - nop - -handle_int: - jal irq_dispatch - move a1, sp - j ret_from_irq - nop - -handle_irq: - jal do_IRQ - move a1, sp - j ret_from_irq - END(vr41xx_handle_interrupt) diff --git a/arch/mips/vr41xx/common/irq.c b/arch/mips/vr41xx/common/irq.c index 61aa264275f..86796bb63c3 100644 --- a/arch/mips/vr41xx/common/irq.c +++ b/arch/mips/vr41xx/common/irq.c @@ -59,7 +59,7 @@ int cascade_irq(unsigned int irq, int (*get_irq)(unsigned int, struct pt_regs *) EXPORT_SYMBOL_GPL(cascade_irq); -asmlinkage void irq_dispatch(unsigned int irq, struct pt_regs *regs) +static void irq_dispatch(unsigned int irq, struct pt_regs *regs) { irq_cascade_t *cascade; irq_desc_t *desc; @@ -84,11 +84,32 @@ asmlinkage void irq_dispatch(unsigned int irq, struct pt_regs *regs) do_IRQ(irq, regs); } -extern asmlinkage void vr41xx_handle_interrupt(void); +asmlinkage void plat_irq_dispatch(struct pt_regs *regs) +{ + unsigned int pending = read_c0_cause() & read_c0_status() & ST0_IM; + + if (pending & CAUSEF_IP7) + do_IRQ(7, regs); + else if (pending & 0x7800) { + if (pending & CAUSEF_IP3) + irq_dispatch(3, regs); + else if (pending & CAUSEF_IP4) + irq_dispatch(4, regs); + else if (pending & CAUSEF_IP5) + irq_dispatch(5, regs); + else if (pending & CAUSEF_IP6) + irq_dispatch(6, regs); + } else if (pending & CAUSEF_IP2) + irq_dispatch(2, regs); + else if (pending & CAUSEF_IP0) + do_IRQ(0, regs); + else if (pending & CAUSEF_IP1) + do_IRQ(1, regs); + else + spurious_interrupt(regs); +} void __init arch_init_irq(void) { mips_cpu_irq_init(MIPS_CPU_IRQ_BASE); - - set_except_vector(0, vr41xx_handle_interrupt); } -- cgit v1.2.3 From 1cc89038f3921f4d79a9d24c8490aa9c0549e371 Mon Sep 17 00:00:00 2001 From: Atsushi Nemoto Date: Tue, 4 Apr 2006 13:11:45 +0900 Subject: [MIPS] Enable SCHED_NO_NO_OMIT_FRAME_POINTER for MIPS. MIPS get_wchan() no longer requires -fno-omit-frame-pointer. Signed-off-by: Atsushi Nemoto Signed-off-by: Ralf Baechle --- arch/mips/Kconfig | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'arch') diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig index 7aec60d4042..7b49aa5e8e2 100644 --- a/arch/mips/Kconfig +++ b/arch/mips/Kconfig @@ -816,6 +816,10 @@ config GENERIC_CALIBRATE_DELAY bool default y +config SCHED_NO_NO_OMIT_FRAME_POINTER + bool + default y + # # Select some configuration options automatically based on user selections. # -- cgit v1.2.3 From 67a3f6de939a5f52e0aea6dcff7778d4bcca0734 Mon Sep 17 00:00:00 2001 From: Atsushi Nemoto Date: Tue, 4 Apr 2006 17:34:14 +0900 Subject: [MIPS] Fix tx49_blast_icache32_page_indexed. Fix the cache index value in tx49_blast_icache32_page_indexed(). This is a damage by de62893bc0725f8b5f0445250577cd7a10b2d8f8 commit. Signed-off-by: Atsushi Nemoto Signed-off-by: Ralf Baechle --- arch/mips/mm/c-r4k.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/mips/mm/c-r4k.c b/arch/mips/mm/c-r4k.c index 32b7f6aeb98..c4c208449d8 100644 --- a/arch/mips/mm/c-r4k.c +++ b/arch/mips/mm/c-r4k.c @@ -154,7 +154,8 @@ static inline void blast_icache32_r4600_v1_page_indexed(unsigned long page) static inline void tx49_blast_icache32_page_indexed(unsigned long page) { - unsigned long start = page; + unsigned long indexmask = current_cpu_data.icache.waysize - 1; + unsigned long start = INDEX_BASE + (page & indexmask); unsigned long end = start + PAGE_SIZE; unsigned long ws_inc = 1UL << current_cpu_data.icache.waybit; unsigned long ws_end = current_cpu_data.icache.ways << -- cgit v1.2.3 From 62a442155ea58a17497b487324b27ec2f2dc5c5c Mon Sep 17 00:00:00 2001 From: Yoichi Yuasa Date: Tue, 4 Apr 2006 20:48:47 +0900 Subject: [MIPS] Fix VR41xx build errors. Signed-off-by: Ralf Baechle Signed-off-by: Yoichi Yuasa --- arch/mips/vr41xx/Kconfig | 13 +++++++++++++ 1 file changed, 13 insertions(+) (limited to 'arch') diff --git a/arch/mips/vr41xx/Kconfig b/arch/mips/vr41xx/Kconfig index a7add16c9aa..055a2cdfc84 100644 --- a/arch/mips/vr41xx/Kconfig +++ b/arch/mips/vr41xx/Kconfig @@ -4,6 +4,8 @@ config CASIO_E55 select DMA_NONCOHERENT select IRQ_CPU select ISA + select SYS_HAS_CPU_VR41XX + select SYS_SUPPORTS_32BIT_KERNEL select SYS_SUPPORTS_LITTLE_ENDIAN config IBM_WORKPAD @@ -12,6 +14,8 @@ config IBM_WORKPAD select DMA_NONCOHERENT select IRQ_CPU select ISA + select SYS_HAS_CPU_VR41XX + select SYS_SUPPORTS_32BIT_KERNEL select SYS_SUPPORTS_LITTLE_ENDIAN config NEC_CMBVR4133 @@ -21,6 +25,9 @@ config NEC_CMBVR4133 select DMA_NONCOHERENT select IRQ_CPU select HW_HAS_PCI + select SYS_HAS_CPU_VR41XX + select SYS_SUPPORTS_32BIT_KERNEL + select SYS_SUPPORTS_LITTLE_ENDIAN config ROCKHOPPER bool "Support for Rockhopper baseboard" @@ -34,6 +41,8 @@ config TANBAC_TB022X select DMA_NONCOHERENT select HW_HAS_PCI select IRQ_CPU + select SYS_HAS_CPU_VR41XX + select SYS_SUPPORTS_32BIT_KERNEL select SYS_SUPPORTS_LITTLE_ENDIAN help The TANBAC VR4131 multichip module(TB0225) and @@ -65,6 +74,8 @@ config VICTOR_MPC30X select DMA_NONCOHERENT select HW_HAS_PCI select IRQ_CPU + select SYS_HAS_CPU_VR41XX + select SYS_SUPPORTS_32BIT_KERNEL select SYS_SUPPORTS_LITTLE_ENDIAN config ZAO_CAPCELLA @@ -73,6 +84,8 @@ config ZAO_CAPCELLA select DMA_NONCOHERENT select HW_HAS_PCI select IRQ_CPU + select SYS_HAS_CPU_VR41XX + select SYS_SUPPORTS_32BIT_KERNEL select SYS_SUPPORTS_LITTLE_ENDIAN config PCI_VR41XX -- cgit v1.2.3 From 193dd2ce2a4a1c5b2e7814544572424d497069db Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Tue, 4 Apr 2006 15:09:06 +0100 Subject: [MIPS] R2: Implement shadow register allocation without spinlock. Signed-off-by: Ralf Baechle --- arch/mips/kernel/traps.c | 41 ++++++++++++++++++----------------------- 1 file changed, 18 insertions(+), 23 deletions(-) (limited to 'arch') diff --git a/arch/mips/kernel/traps.c b/arch/mips/kernel/traps.c index 61efc61c45e..081e6ed5bb6 100644 --- a/arch/mips/kernel/traps.c +++ b/arch/mips/kernel/traps.c @@ -961,15 +961,19 @@ void *set_except_vector(int n, void *addr) #ifdef CONFIG_CPU_MIPSR2 /* - * Shadow register allocation + * MIPSR2 shadow register set allocation * FIXME: SMP... */ -/* MIPSR2 shadow register sets */ -struct shadow_registers { - spinlock_t sr_lock; /* */ - int sr_supported; /* Number of shadow register sets supported */ - int sr_allocated; /* Bitmap of allocated shadow registers */ +static struct shadow_registers { + /* + * Number of shadow register sets supported + */ + unsigned long sr_supported; + /* + * Bitmap of allocated shadow registers + */ + unsigned long sr_allocated; } shadow_registers; void mips_srs_init(void) @@ -980,7 +984,6 @@ void mips_srs_init(void) shadow_registers.sr_supported); #endif shadow_registers.sr_allocated = 1; /* Set 0 used by kernel */ - spin_lock_init(&shadow_registers.sr_lock); } int mips_srs_max(void) @@ -991,32 +994,24 @@ int mips_srs_max(void) int mips_srs_alloc(void) { struct shadow_registers *sr = &shadow_registers; - unsigned long flags; int set; - spin_lock_irqsave(&sr->sr_lock, flags); +again: + set = find_first_zero_bit(&sr->sr_allocated, sr->sr_supported); + if (set >= sr->sr_supported) + return -1; - for (set = 0; set < sr->sr_supported; set++) { - if ((sr->sr_allocated & (1 << set)) == 0) { - sr->sr_allocated |= 1 << set; - spin_unlock_irqrestore(&sr->sr_lock, flags); - return set; - } - } + if (test_and_set_bit(set, &sr->sr_allocated)) + goto again; - /* None available */ - spin_unlock_irqrestore(&sr->sr_lock, flags); - return -1; + return set; } void mips_srs_free (int set) { struct shadow_registers *sr = &shadow_registers; - unsigned long flags; - spin_lock_irqsave(&sr->sr_lock, flags); - sr->sr_allocated &= ~(1 << set); - spin_unlock_irqrestore(&sr->sr_lock, flags); + clear_bit(set, &sr->sr_allocated); } static void *set_vi_srs_handler(int n, void *addr, int srs) -- cgit v1.2.3 From bce1a28686ed6527977a198f698278b67c6bf9ec Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Wed, 5 Apr 2006 09:45:45 +0100 Subject: [MIPS] R2: Instruction hazard barrier. Signed-off-by: Ralf Baechle --- arch/mips/kernel/entry.S | 15 +++++++++++++++ 1 file changed, 15 insertions(+) (limited to 'arch') diff --git a/arch/mips/kernel/entry.S b/arch/mips/kernel/entry.S index 371571f4f28..b1939a486d2 100644 --- a/arch/mips/kernel/entry.S +++ b/arch/mips/kernel/entry.S @@ -119,3 +119,18 @@ syscall_exit_work: li a1, 1 jal do_syscall_trace b resume_userspace + +#if defined(CONFIG_CPU_MIPSR2) || defined(CONFIG_MIPS_MT) + +/* + * MIPS32R2 Instruction Hazard Barrier - must be called + * + * For C code use the inline version named instruction_hazard(). + */ +LEAF(mips_ihb) + .set mips32r2 + jr.hb ra + nop + END(mips_ihb) + +#endif /* CONFIG_CPU_MIPSR2 or CONFIG_MIPS_MT */ -- cgit v1.2.3 From 2600990e640e3bef29ed89d565864cf16ee83833 Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Wed, 5 Apr 2006 09:45:45 +0100 Subject: [MIPS] kpsd and other AP/SP improvements. Signed-off-by: Ralf Baechle --- arch/mips/Kconfig | 10 + arch/mips/kernel/Makefile | 1 + arch/mips/kernel/kspd.c | 398 ++++++++++++++++++++++++++++ arch/mips/kernel/rtlx.c | 517 +++++++++++++++++++++++++----------- arch/mips/kernel/vpe.c | 659 ++++++++++++++++++++++++++++++---------------- 5 files changed, 1205 insertions(+), 380 deletions(-) create mode 100644 arch/mips/kernel/kspd.c (limited to 'arch') diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig index 7b49aa5e8e2..a7bac0459f9 100644 --- a/arch/mips/Kconfig +++ b/arch/mips/Kconfig @@ -1476,6 +1476,16 @@ config MIPS_VPE_APSP_API depends on MIPS_VPE_LOADER help +config MIPS_APSP_KSPD + bool "Enable KSPD" + depends on MIPS_VPE_APSP_API + default y + help + KSPD is a kernel daemon that accepts syscall requests from the SP + side, actions them and returns the results. It also handles the + "exit" syscall notifying other kernel modules the SP program is + exiting. You probably want to say yes here. + config SB1_PASS_1_WORKAROUNDS bool depends on CPU_SB1_PASS_1 diff --git a/arch/mips/kernel/Makefile b/arch/mips/kernel/Makefile index 309d54cceda..9ec01de81c0 100644 --- a/arch/mips/kernel/Makefile +++ b/arch/mips/kernel/Makefile @@ -36,6 +36,7 @@ obj-$(CONFIG_SMP) += smp.o obj-$(CONFIG_MIPS_MT_SMP) += smp_mt.o +obj-$(CONFIG_MIPS_APSP_KSPD) += kspd.o obj-$(CONFIG_MIPS_VPE_LOADER) += vpe.o obj-$(CONFIG_MIPS_VPE_APSP_API) += rtlx.o diff --git a/arch/mips/kernel/kspd.c b/arch/mips/kernel/kspd.c new file mode 100644 index 00000000000..f06a144c788 --- /dev/null +++ b/arch/mips/kernel/kspd.c @@ -0,0 +1,398 @@ +/* + * Copyright (C) 2005 MIPS Technologies, Inc. All rights reserved. + * + * This program is free software; you can distribute it and/or modify it + * under the terms of the GNU General Public License (Version 2) as + * published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License + * for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. + * + */ +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include + +static struct workqueue_struct *workqueue = NULL; +static struct work_struct work; + +extern unsigned long cpu_khz; + +struct mtsp_syscall { + int cmd; + unsigned char abi; + unsigned char size; +}; + +struct mtsp_syscall_ret { + int retval; + int errno; +}; + +struct mtsp_syscall_generic { + int arg0; + int arg1; + int arg2; + int arg3; + int arg4; + int arg5; + int arg6; +}; + +static struct list_head kspd_notifylist; +static int sp_stopping = 0; + +/* these should match with those in the SDE kit */ +#define MTSP_SYSCALL_BASE 0 +#define MTSP_SYSCALL_EXIT (MTSP_SYSCALL_BASE + 0) +#define MTSP_SYSCALL_OPEN (MTSP_SYSCALL_BASE + 1) +#define MTSP_SYSCALL_READ (MTSP_SYSCALL_BASE + 2) +#define MTSP_SYSCALL_WRITE (MTSP_SYSCALL_BASE + 3) +#define MTSP_SYSCALL_CLOSE (MTSP_SYSCALL_BASE + 4) +#define MTSP_SYSCALL_LSEEK32 (MTSP_SYSCALL_BASE + 5) +#define MTSP_SYSCALL_ISATTY (MTSP_SYSCALL_BASE + 6) +#define MTSP_SYSCALL_GETTIME (MTSP_SYSCALL_BASE + 7) +#define MTSP_SYSCALL_PIPEFREQ (MTSP_SYSCALL_BASE + 8) +#define MTSP_SYSCALL_GETTOD (MTSP_SYSCALL_BASE + 9) + +#define MTSP_O_RDONLY 0x0000 +#define MTSP_O_WRONLY 0x0001 +#define MTSP_O_RDWR 0x0002 +#define MTSP_O_NONBLOCK 0x0004 +#define MTSP_O_APPEND 0x0008 +#define MTSP_O_SHLOCK 0x0010 +#define MTSP_O_EXLOCK 0x0020 +#define MTSP_O_ASYNC 0x0040 +#define MTSP_O_FSYNC O_SYNC +#define MTSP_O_NOFOLLOW 0x0100 +#define MTSP_O_SYNC 0x0080 +#define MTSP_O_CREAT 0x0200 +#define MTSP_O_TRUNC 0x0400 +#define MTSP_O_EXCL 0x0800 +#define MTSP_O_BINARY 0x8000 + +#define SP_VPE 1 + +struct apsp_table { + int sp; + int ap; +}; + +/* we might want to do the mode flags too */ +struct apsp_table open_flags_table[] = { + { MTSP_O_RDWR, O_RDWR }, + { MTSP_O_WRONLY, O_WRONLY }, + { MTSP_O_CREAT, O_CREAT }, + { MTSP_O_TRUNC, O_TRUNC }, + { MTSP_O_NONBLOCK, O_NONBLOCK }, + { MTSP_O_APPEND, O_APPEND }, + { MTSP_O_NOFOLLOW, O_NOFOLLOW } +}; + +struct apsp_table syscall_command_table[] = { + { MTSP_SYSCALL_OPEN, __NR_open }, + { MTSP_SYSCALL_CLOSE, __NR_close }, + { MTSP_SYSCALL_READ, __NR_read }, + { MTSP_SYSCALL_WRITE, __NR_write }, + { MTSP_SYSCALL_LSEEK32, __NR_lseek } +}; + +static int sp_syscall(int num, int arg0, int arg1, int arg2, int arg3) +{ + register long int _num __asm__ ("$2") = num; + register long int _arg0 __asm__ ("$4") = arg0; + register long int _arg1 __asm__ ("$5") = arg1; + register long int _arg2 __asm__ ("$6") = arg2; + register long int _arg3 __asm__ ("$7") = arg3; + + mm_segment_t old_fs; + + old_fs = get_fs(); + set_fs(KERNEL_DS); + + __asm__ __volatile__ ( + " syscall \n" + : "=r" (_num), "=r" (_arg3) + : "r" (_num), "r" (_arg0), "r" (_arg1), "r" (_arg2), "r" (_arg3)); + + set_fs(old_fs); + + /* $a3 is error flag */ + if (_arg3) + return -_num; + + return _num; +} + +static int translate_syscall_command(int cmd) +{ + int i; + int ret = -1; + + for (i = 0; i < ARRAY_SIZE(syscall_command_table); i++) { + if ((cmd == syscall_command_table[i].sp)) + return syscall_command_table[i].ap; + } + + return ret; +} + +static unsigned int translate_open_flags(int flags) +{ + int i; + unsigned int ret = 0; + + for (i = 0; i < (sizeof(open_flags_table) / sizeof(struct apsp_table)); + i++) { + if( (flags & open_flags_table[i].sp) ) { + ret |= open_flags_table[i].ap; + } + } + + return ret; +} + + +static void sp_setfsuidgid( uid_t uid, gid_t gid) +{ + current->fsuid = uid; + current->fsgid = gid; + + key_fsuid_changed(current); + key_fsgid_changed(current); +} + +/* + * Expects a request to be on the sysio channel. Reads it. Decides whether + * its a linux syscall and runs it, or whatever. Puts the return code back + * into the request and sends the whole thing back. + */ +void sp_work_handle_request(void) +{ + struct mtsp_syscall sc; + struct mtsp_syscall_generic generic; + struct mtsp_syscall_ret ret; + struct kspd_notifications *n; + struct timeval tv; + struct timezone tz; + int cmd; + + char *vcwd; + mm_segment_t old_fs; + int size; + + ret.retval = -1; + + if (!rtlx_read(RTLX_CHANNEL_SYSIO, &sc, sizeof(struct mtsp_syscall), 0)) { + printk(KERN_ERR "Expected request but nothing to read\n"); + return; + } + + size = sc.size; + + if (size) { + if (!rtlx_read(RTLX_CHANNEL_SYSIO, &generic, size, 0)) { + printk(KERN_ERR "Expected request but nothing to read\n"); + return; + } + } + + /* Run the syscall at the priviledge of the user who loaded the + SP program */ + + if (vpe_getuid(SP_VPE)) + sp_setfsuidgid( vpe_getuid(SP_VPE), vpe_getgid(SP_VPE)); + + switch (sc.cmd) { + /* needs the flags argument translating from SDE kit to + linux */ + case MTSP_SYSCALL_PIPEFREQ: + ret.retval = cpu_khz * 1000; + ret.errno = 0; + break; + + case MTSP_SYSCALL_GETTOD: + memset(&tz, 0, sizeof(tz)); + if ((ret.retval = sp_syscall(__NR_gettimeofday, (int)&tv, + (int)&tz, 0,0)) == 0) + ret.retval = tv.tv_sec; + + ret.errno = errno; + break; + + case MTSP_SYSCALL_EXIT: + list_for_each_entry(n, &kspd_notifylist, list) + n->kspd_sp_exit(SP_VPE); + sp_stopping = 1; + + printk(KERN_DEBUG "KSPD got exit syscall from SP exitcode %d\n", + generic.arg0); + break; + + case MTSP_SYSCALL_OPEN: + generic.arg1 = translate_open_flags(generic.arg1); + + vcwd = vpe_getcwd(SP_VPE); + + /* change to the cwd of the process that loaded the SP program */ + old_fs = get_fs(); + set_fs(KERNEL_DS); + sys_chdir(vcwd); + set_fs(old_fs); + + sc.cmd = __NR_open; + + /* fall through */ + + default: + if ((sc.cmd >= __NR_Linux) && + (sc.cmd <= (__NR_Linux + __NR_Linux_syscalls)) ) + cmd = sc.cmd; + else + cmd = translate_syscall_command(sc.cmd); + + if (cmd >= 0) { + ret.retval = sp_syscall(cmd, generic.arg0, generic.arg1, + generic.arg2, generic.arg3); + ret.errno = errno; + } else + printk(KERN_WARNING + "KSPD: Unknown SP syscall number %d\n", sc.cmd); + break; + } /* switch */ + + if (vpe_getuid(SP_VPE)) + sp_setfsuidgid( 0, 0); + + if ((rtlx_write(RTLX_CHANNEL_SYSIO, &ret, sizeof(struct mtsp_syscall_ret), 0)) + < sizeof(struct mtsp_syscall_ret)) + printk("KSPD: sp_work_handle_request failed to send to SP\n"); +} + +static void sp_cleanup(void) +{ + struct files_struct *files = current->files; + int i, j; + struct fdtable *fdt; + + j = 0; + + /* + * It is safe to dereference the fd table without RCU or + * ->file_lock + */ + fdt = files_fdtable(files); + for (;;) { + unsigned long set; + i = j * __NFDBITS; + if (i >= fdt->max_fdset || i >= fdt->max_fds) + break; + set = fdt->open_fds->fds_bits[j++]; + while (set) { + if (set & 1) { + struct file * file = xchg(&fdt->fd[i], NULL); + if (file) + filp_close(file, files); + } + i++; + set >>= 1; + } + } +} + +static int channel_open = 0; + +/* the work handler */ +static void sp_work(void *data) +{ + if (!channel_open) { + if( rtlx_open(RTLX_CHANNEL_SYSIO, 1) != 0) { + printk("KSPD: unable to open sp channel\n"); + sp_stopping = 1; + } else { + channel_open++; + printk(KERN_DEBUG "KSPD: SP channel opened\n"); + } + } else { + /* wait for some data, allow it to sleep */ + rtlx_read_poll(RTLX_CHANNEL_SYSIO, 1); + + /* Check we haven't been woken because we are stopping */ + if (!sp_stopping) + sp_work_handle_request(); + } + + if (!sp_stopping) + queue_work(workqueue, &work); + else + sp_cleanup(); +} + +static void startwork(int vpe) +{ + sp_stopping = channel_open = 0; + + if (workqueue == NULL) { + if ((workqueue = create_singlethread_workqueue("kspd")) == NULL) { + printk(KERN_ERR "unable to start kspd\n"); + return; + } + + INIT_WORK(&work, sp_work, NULL); + queue_work(workqueue, &work); + } else + queue_work(workqueue, &work); + +} + +static void stopwork(int vpe) +{ + sp_stopping = 1; + + printk(KERN_DEBUG "KSPD: SP stopping\n"); +} + +void kspd_notify(struct kspd_notifications *notify) +{ + list_add(¬ify->list, &kspd_notifylist); +} + +static struct vpe_notifications notify; +static int kspd_module_init(void) +{ + INIT_LIST_HEAD(&kspd_notifylist); + + notify.start = startwork; + notify.stop = stopwork; + vpe_notify(SP_VPE, ¬ify); + + return 0; +} + +static void kspd_module_exit(void) +{ + +} + +module_init(kspd_module_init); +module_exit(kspd_module_exit); + +MODULE_DESCRIPTION("MIPS KSPD"); +MODULE_AUTHOR("Elizabeth Oldham, MIPS Technologies, Inc."); +MODULE_LICENSE("GPL"); diff --git a/arch/mips/kernel/rtlx.c b/arch/mips/kernel/rtlx.c index 986a9cf2306..6179805af9f 100644 --- a/arch/mips/kernel/rtlx.c +++ b/arch/mips/kernel/rtlx.c @@ -21,45 +21,44 @@ #include #include #include +#include +#include +#include +#include +#include +#include +#include +#include #include -#include #include #include #include - #include -#include +#include +#include #include #include +#include +#include #include -#include #define RTLX_TARG_VPE 1 static struct rtlx_info *rtlx; static int major; static char module_name[] = "rtlx"; -static struct irqaction irq; -static int irq_num; - -static inline int spacefree(int read, int write, int size) -{ - if (read == write) { - /* - * never fill the buffer completely, so indexes are always - * equal if empty and only empty, or !equal if data available - */ - return size - 1; - } - - return ((read + size - write) % size) - 1; -} static struct chan_waitqueues { wait_queue_head_t rt_queue; wait_queue_head_t lx_queue; + int in_open; } channel_wqs[RTLX_CHANNELS]; +static struct irqaction irq; +static int irq_num; +static struct vpe_notifications notify; +static int sp_stopping = 0; + extern void *vpe_get_shared(int index); static void rtlx_dispatch(struct pt_regs *regs) @@ -67,174 +66,298 @@ static void rtlx_dispatch(struct pt_regs *regs) do_IRQ(MIPSCPU_INT_BASE + MIPS_CPU_RTLX_IRQ, regs); } + +/* Interrupt handler may be called before rtlx_init has otherwise had + a chance to run. +*/ static irqreturn_t rtlx_interrupt(int irq, void *dev_id, struct pt_regs *regs) { int i; for (i = 0; i < RTLX_CHANNELS; i++) { - struct rtlx_channel *chan = &rtlx->channel[i]; - - if (chan->lx_read != chan->lx_write) - wake_up_interruptible(&channel_wqs[i].lx_queue); + wake_up(&channel_wqs[i].lx_queue); + wake_up(&channel_wqs[i].rt_queue); } return IRQ_HANDLED; } -/* call when we have the address of the shared structure from the SP side. */ -static int rtlx_init(struct rtlx_info *rtlxi) +static __attribute_used__ void dump_rtlx(void) { int i; - if (rtlxi->id != RTLX_ID) { - printk(KERN_WARNING "no valid RTLX id at 0x%p\n", rtlxi); - return -ENOEXEC; - } + printk("id 0x%lx state %d\n", rtlx->id, rtlx->state); - /* initialise the wait queues */ for (i = 0; i < RTLX_CHANNELS; i++) { - init_waitqueue_head(&channel_wqs[i].rt_queue); - init_waitqueue_head(&channel_wqs[i].lx_queue); - } + struct rtlx_channel *chan = &rtlx->channel[i]; - /* set up for interrupt handling */ - memset(&irq, 0, sizeof(struct irqaction)); + printk(" rt_state %d lx_state %d buffer_size %d\n", + chan->rt_state, chan->lx_state, chan->buffer_size); - if (cpu_has_vint) - set_vi_handler(MIPS_CPU_RTLX_IRQ, rtlx_dispatch); + printk(" rt_read %d rt_write %d\n", + chan->rt_read, chan->rt_write); - irq_num = MIPSCPU_INT_BASE + MIPS_CPU_RTLX_IRQ; - irq.handler = rtlx_interrupt; - irq.flags = SA_INTERRUPT; - irq.name = "RTLX"; - irq.dev_id = rtlx; - setup_irq(irq_num, &irq); + printk(" lx_read %d lx_write %d\n", + chan->lx_read, chan->lx_write); + + printk(" rt_buffer <%s>\n", chan->rt_buffer); + printk(" lx_buffer <%s>\n", chan->lx_buffer); + } +} + +/* call when we have the address of the shared structure from the SP side. */ +static int rtlx_init(struct rtlx_info *rtlxi) +{ + if (rtlxi->id != RTLX_ID) { + printk(KERN_ERR "no valid RTLX id at 0x%p 0x%x\n", rtlxi, rtlxi->id); + return -ENOEXEC; + } rtlx = rtlxi; return 0; } -/* only allow one open process at a time to open each channel */ -static int rtlx_open(struct inode *inode, struct file *filp) +/* notifications */ +static void starting(int vpe) { - int minor, ret; + int i; + sp_stopping = 0; + + /* force a reload of rtlx */ + rtlx=NULL; + + /* wake up any sleeping rtlx_open's */ + for (i = 0; i < RTLX_CHANNELS; i++) + wake_up_interruptible(&channel_wqs[i].lx_queue); +} + +static void stopping(int vpe) +{ + int i; + + sp_stopping = 1; + for (i = 0; i < RTLX_CHANNELS; i++) + wake_up_interruptible(&channel_wqs[i].lx_queue); +} + + +int rtlx_open(int index, int can_sleep) +{ + int ret; struct rtlx_channel *chan; + volatile struct rtlx_info **p; - /* assume only 1 device at the mo. */ - minor = MINOR(inode->i_rdev); + if (index >= RTLX_CHANNELS) { + printk(KERN_DEBUG "rtlx_open index out of range\n"); + return -ENOSYS; + } + + if (channel_wqs[index].in_open) { + printk(KERN_DEBUG "rtlx_open channel %d already opened\n", index); + return -EBUSY; + } + + channel_wqs[index].in_open++; if (rtlx == NULL) { - struct rtlx_info **p; if( (p = vpe_get_shared(RTLX_TARG_VPE)) == NULL) { - printk(KERN_ERR "vpe_get_shared is NULL. " - "Has an SP program been loaded?\n"); - return -EFAULT; + if (can_sleep) { + DECLARE_WAITQUEUE(wait, current); + + /* go to sleep */ + add_wait_queue(&channel_wqs[index].lx_queue, &wait); + + set_current_state(TASK_INTERRUPTIBLE); + while ((p = vpe_get_shared(RTLX_TARG_VPE)) == NULL) { + schedule(); + set_current_state(TASK_INTERRUPTIBLE); + } + + set_current_state(TASK_RUNNING); + remove_wait_queue(&channel_wqs[index].lx_queue, &wait); + + /* back running */ + } else { + printk( KERN_DEBUG "No SP program loaded, and device " + "opened with O_NONBLOCK\n"); + channel_wqs[index].in_open = 0; + return -ENOSYS; + } } if (*p == NULL) { - printk(KERN_ERR "vpe_shared %p %p\n", p, *p); - return -EFAULT; + if (can_sleep) { + DECLARE_WAITQUEUE(wait, current); + + /* go to sleep */ + add_wait_queue(&channel_wqs[index].lx_queue, &wait); + + set_current_state(TASK_INTERRUPTIBLE); + while (*p == NULL) { + schedule(); + + /* reset task state to interruptable otherwise + we'll whizz round here like a very fast loopy + thing. schedule() appears to return with state + set to TASK_RUNNING. + + If the loaded SP program, for whatever reason, + doesn't set up the shared structure *p will never + become true. So whoever connected to either /dev/rt? + or if it was kspd, will then take up rather a lot of + processor cycles. + */ + + set_current_state(TASK_INTERRUPTIBLE); + } + + set_current_state(TASK_RUNNING); + remove_wait_queue(&channel_wqs[index].lx_queue, &wait); + + /* back running */ + } + else { + printk(" *vpe_get_shared is NULL. " + "Has an SP program been loaded?\n"); + channel_wqs[index].in_open = 0; + return -ENOSYS; + } + } + + if ((unsigned int)*p < KSEG0) { + printk(KERN_WARNING "vpe_get_shared returned an invalid pointer " + "maybe an error code %d\n", (int)*p); + channel_wqs[index].in_open = 0; + return -ENOSYS; } - if ((ret = rtlx_init(*p)) < 0) - return ret; + if ((ret = rtlx_init(*p)) < 0) { + channel_wqs[index].in_open = 0; + return ret; + } } - chan = &rtlx->channel[minor]; + chan = &rtlx->channel[index]; - if (test_and_set_bit(RTLX_STATE_OPENED, &chan->lx_state)) - return -EBUSY; + if (chan->lx_state == RTLX_STATE_OPENED) { + channel_wqs[index].in_open = 0; + return -EBUSY; + } + chan->lx_state = RTLX_STATE_OPENED; + channel_wqs[index].in_open = 0; return 0; } -static int rtlx_release(struct inode *inode, struct file *filp) +int rtlx_release(int index) { - int minor = MINOR(inode->i_rdev); - - clear_bit(RTLX_STATE_OPENED, &rtlx->channel[minor].lx_state); - smp_mb__after_clear_bit(); - + rtlx->channel[index].lx_state = RTLX_STATE_UNUSED; return 0; } -static unsigned int rtlx_poll(struct file *file, poll_table * wait) +unsigned int rtlx_read_poll(int index, int can_sleep) { - int minor; - unsigned int mask = 0; - struct rtlx_channel *chan; + struct rtlx_channel *chan; - minor = MINOR(file->f_dentry->d_inode->i_rdev); - chan = &rtlx->channel[minor]; + if (rtlx == NULL) + return 0; - poll_wait(file, &channel_wqs[minor].rt_queue, wait); - poll_wait(file, &channel_wqs[minor].lx_queue, wait); + chan = &rtlx->channel[index]; /* data available to read? */ - if (chan->lx_read != chan->lx_write) - mask |= POLLIN | POLLRDNORM; + if (chan->lx_read == chan->lx_write) { + if (can_sleep) { + DECLARE_WAITQUEUE(wait, current); - /* space to write */ - if (spacefree(chan->rt_read, chan->rt_write, chan->buffer_size)) - mask |= POLLOUT | POLLWRNORM; + /* go to sleep */ + add_wait_queue(&channel_wqs[index].lx_queue, &wait); - return mask; + set_current_state(TASK_INTERRUPTIBLE); + while (chan->lx_read == chan->lx_write) { + schedule(); + + set_current_state(TASK_INTERRUPTIBLE); + + if (sp_stopping) { + set_current_state(TASK_RUNNING); + remove_wait_queue(&channel_wqs[index].lx_queue, &wait); + return 0; + } + } + + set_current_state(TASK_RUNNING); + remove_wait_queue(&channel_wqs[index].lx_queue, &wait); + + /* back running */ + } + else + return 0; + } + + return (chan->lx_write + chan->buffer_size - chan->lx_read) + % chan->buffer_size; } -static ssize_t rtlx_read(struct file *file, char __user * buffer, size_t count, - loff_t * ppos) +static inline int write_spacefree(int read, int write, int size) { - unsigned long failed; - size_t fl = 0L; - int minor; - struct rtlx_channel *lx; - DECLARE_WAITQUEUE(wait, current); + if (read == write) { + /* + * Never fill the buffer completely, so indexes are always + * equal if empty and only empty, or !equal if data available + */ + return size - 1; + } - minor = MINOR(file->f_dentry->d_inode->i_rdev); - lx = &rtlx->channel[minor]; + return ((read + size - write) % size) - 1; +} - /* data available? */ - if (lx->lx_write == lx->lx_read) { - if (file->f_flags & O_NONBLOCK) - return 0; /* -EAGAIN makes cat whinge */ +unsigned int rtlx_write_poll(int index) +{ + struct rtlx_channel *chan = &rtlx->channel[index]; + return write_spacefree(chan->rt_read, chan->rt_write, chan->buffer_size); +} - /* go to sleep */ - add_wait_queue(&channel_wqs[minor].lx_queue, &wait); - set_current_state(TASK_INTERRUPTIBLE); +static inline void copy_to(void *dst, void *src, size_t count, int user) +{ + if (user) + copy_to_user(dst, src, count); + else + memcpy(dst, src, count); +} - while (lx->lx_write == lx->lx_read) - schedule(); +static inline void copy_from(void *dst, void *src, size_t count, int user) +{ + if (user) + copy_from_user(dst, src, count); + else + memcpy(dst, src, count); +} - set_current_state(TASK_RUNNING); - remove_wait_queue(&channel_wqs[minor].lx_queue, &wait); +ssize_t rtlx_read(int index, void *buff, size_t count, int user) +{ + size_t fl = 0L; + struct rtlx_channel *lx; - /* back running */ - } + if (rtlx == NULL) + return -ENOSYS; + + lx = &rtlx->channel[index]; /* find out how much in total */ count = min(count, - (size_t)(lx->lx_write + lx->buffer_size - lx->lx_read) % lx->buffer_size); + (size_t)(lx->lx_write + lx->buffer_size - lx->lx_read) + % lx->buffer_size); /* then how much from the read pointer onwards */ - fl = min(count, (size_t)lx->buffer_size - lx->lx_read); + fl = min( count, (size_t)lx->buffer_size - lx->lx_read); - failed = copy_to_user (buffer, &lx->lx_buffer[lx->lx_read], fl); - if (failed) { - count = fl - failed; - goto out; - } + copy_to(buff, &lx->lx_buffer[lx->lx_read], fl, user); /* and if there is anything left at the beginning of the buffer */ - if (count - fl) { - failed = copy_to_user (buffer + fl, lx->lx_buffer, count - fl); - if (failed) { - count -= failed; - goto out; - } - } + if ( count - fl ) + copy_to (buff + fl, lx->lx_buffer, count - fl, user); -out: /* update the index */ lx->lx_read += count; lx->lx_read %= lx->buffer_size; @@ -242,20 +365,101 @@ out: return count; } -static ssize_t rtlx_write(struct file *file, const char __user * buffer, +ssize_t rtlx_write(int index, void *buffer, size_t count, int user) +{ + struct rtlx_channel *rt; + size_t fl; + + if (rtlx == NULL) + return(-ENOSYS); + + rt = &rtlx->channel[index]; + + /* total number of bytes to copy */ + count = min(count, + (size_t)write_spacefree(rt->rt_read, rt->rt_write, + rt->buffer_size)); + + /* first bit from write pointer to the end of the buffer, or count */ + fl = min(count, (size_t) rt->buffer_size - rt->rt_write); + + copy_from (&rt->rt_buffer[rt->rt_write], buffer, fl, user); + + /* if there's any left copy to the beginning of the buffer */ + if( count - fl ) + copy_from (rt->rt_buffer, buffer + fl, count - fl, user); + + rt->rt_write += count; + rt->rt_write %= rt->buffer_size; + + return(count); +} + + +static int file_open(struct inode *inode, struct file *filp) +{ + int minor = MINOR(inode->i_rdev); + + return rtlx_open(minor, (filp->f_flags & O_NONBLOCK) ? 0 : 1); +} + +static int file_release(struct inode *inode, struct file *filp) +{ + int minor; + minor = MINOR(inode->i_rdev); + + return rtlx_release(minor); +} + +static unsigned int file_poll(struct file *file, poll_table * wait) +{ + int minor; + unsigned int mask = 0; + + minor = MINOR(file->f_dentry->d_inode->i_rdev); + + poll_wait(file, &channel_wqs[minor].rt_queue, wait); + poll_wait(file, &channel_wqs[minor].lx_queue, wait); + + if (rtlx == NULL) + return 0; + + /* data available to read? */ + if (rtlx_read_poll(minor, 0)) + mask |= POLLIN | POLLRDNORM; + + /* space to write */ + if (rtlx_write_poll(minor)) + mask |= POLLOUT | POLLWRNORM; + + return mask; +} + +static ssize_t file_read(struct file *file, char __user * buffer, size_t count, + loff_t * ppos) +{ + int minor = MINOR(file->f_dentry->d_inode->i_rdev); + + /* data available? */ + if (!rtlx_read_poll(minor, (file->f_flags & O_NONBLOCK) ? 0 : 1)) { + return 0; // -EAGAIN makes cat whinge + } + + return rtlx_read(minor, buffer, count, 1); +} + +static ssize_t file_write(struct file *file, const char __user * buffer, size_t count, loff_t * ppos) { - unsigned long failed; int minor; struct rtlx_channel *rt; - size_t fl; DECLARE_WAITQUEUE(wait, current); minor = MINOR(file->f_dentry->d_inode->i_rdev); rt = &rtlx->channel[minor]; /* any space left... */ - if (!spacefree(rt->rt_read, rt->rt_write, rt->buffer_size)) { + if (!rtlx_write_poll(minor)) { if (file->f_flags & O_NONBLOCK) return -EAGAIN; @@ -263,61 +467,64 @@ static ssize_t rtlx_write(struct file *file, const char __user * buffer, add_wait_queue(&channel_wqs[minor].rt_queue, &wait); set_current_state(TASK_INTERRUPTIBLE); - while (!spacefree(rt->rt_read, rt->rt_write, rt->buffer_size)) + while (!rtlx_write_poll(minor)) schedule(); set_current_state(TASK_RUNNING); remove_wait_queue(&channel_wqs[minor].rt_queue, &wait); } - /* total number of bytes to copy */ - count = min(count, (size_t)spacefree(rt->rt_read, rt->rt_write, rt->buffer_size) ); - - /* first bit from write pointer to the end of the buffer, or count */ - fl = min(count, (size_t) rt->buffer_size - rt->rt_write); - - failed = copy_from_user(&rt->rt_buffer[rt->rt_write], buffer, fl); - if (failed) { - count = fl - failed; - goto out; - } - - /* if there's any left copy to the beginning of the buffer */ - if (count - fl) { - failed = copy_from_user(rt->rt_buffer, buffer + fl, count - fl); - if (failed) { - count -= failed; - goto out; - } - } - -out: - rt->rt_write += count; - rt->rt_write %= rt->buffer_size; - - return count; + return rtlx_write(minor, (void *)buffer, count, 1); } static struct file_operations rtlx_fops = { - .owner = THIS_MODULE, - .open = rtlx_open, - .release = rtlx_release, - .write = rtlx_write, - .read = rtlx_read, - .poll = rtlx_poll + .owner = THIS_MODULE, + .open = file_open, + .release = file_release, + .write = file_write, + .read = file_read, + .poll = file_poll }; +static struct irqaction rtlx_irq = { + .handler = rtlx_interrupt, + .flags = SA_INTERRUPT, + .name = "RTLX", +}; + +static int rtlx_irq_num = MIPSCPU_INT_BASE + MIPS_CPU_RTLX_IRQ; + static char register_chrdev_failed[] __initdata = KERN_ERR "rtlx_module_init: unable to register device\n"; -static int __init rtlx_module_init(void) +static int rtlx_module_init(void) { + int i; + major = register_chrdev(0, module_name, &rtlx_fops); if (major < 0) { printk(register_chrdev_failed); return major; } + /* initialise the wait queues */ + for (i = 0; i < RTLX_CHANNELS; i++) { + init_waitqueue_head(&channel_wqs[i].rt_queue); + init_waitqueue_head(&channel_wqs[i].lx_queue); + channel_wqs[i].in_open = 0; + } + + /* set up notifiers */ + notify.start = starting; + notify.stop = stopping; + vpe_notify(RTLX_TARG_VPE, ¬ify); + + if (cpu_has_vint) + set_vi_handler(MIPS_CPU_RTLX_IRQ, rtlx_dispatch); + + rtlx_irq.dev_id = rtlx; + setup_irq(rtlx_irq_num, &rtlx_irq); + return 0; } @@ -330,5 +537,5 @@ module_init(rtlx_module_init); module_exit(rtlx_module_exit); MODULE_DESCRIPTION("MIPS RTLX"); -MODULE_AUTHOR("Elizabeth Clarke, MIPS Technologies, Inc."); +MODULE_AUTHOR("Elizabeth Oldham, MIPS Technologies, Inc."); MODULE_LICENSE("GPL"); diff --git a/arch/mips/kernel/vpe.c b/arch/mips/kernel/vpe.c index ae83b755cf4..80ffaa6d50a 100644 --- a/arch/mips/kernel/vpe.c +++ b/arch/mips/kernel/vpe.c @@ -13,7 +13,6 @@ * You should have received a copy of the GNU General Public License along * with this program; if not, write to the Free Software Foundation, Inc., * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. - * */ /* @@ -27,11 +26,8 @@ * * To load and run, simply cat a SP 'program file' to /dev/vpe1. * i.e cat spapp >/dev/vpe1. - * - * You'll need to have the following device files. - * mknod /dev/vpe0 c 63 0 - * mknod /dev/vpe1 c 63 1 */ + #include #include #include @@ -55,6 +51,8 @@ #include #include #include +#include +#include typedef void *vpe_handle; @@ -68,6 +66,11 @@ typedef void *vpe_handle; static char module_name[] = "vpe"; static int major; +#ifdef CONFIG_MIPS_APSP_KSPD + static struct kspd_notifications kspd_events; +static int kspd_events_reqd = 0; +#endif + /* grab the likely amount of memory we will need. */ #ifdef CONFIG_MIPS_VPE_LOADER_TOM #define P_SIZE (2 * 1024 * 1024) @@ -76,7 +79,10 @@ static int major; #define P_SIZE (256 * 1024) #endif +extern unsigned long physical_memsize; + #define MAX_VPES 16 +#define VPE_PATH_MAX 256 enum vpe_state { VPE_STATE_UNUSED = 0, @@ -102,6 +108,8 @@ struct vpe { unsigned long len; char *pbuffer; unsigned long plen; + unsigned int uid, gid; + char cwd[VPE_PATH_MAX]; unsigned long __start; @@ -113,6 +121,9 @@ struct vpe { /* shared symbol address */ void *shared_ptr; + + /* the list of who wants to know when something major happens */ + struct list_head notify; }; struct tc { @@ -138,7 +149,7 @@ struct vpecontrol_ { } vpecontrol; static void release_progmem(void *ptr); -static void dump_vpe(struct vpe * v); +/* static __attribute_used__ void dump_vpe(struct vpe * v); */ extern void save_gp_address(unsigned int secbase, unsigned int rel); /* get the vpe associated with this minor */ @@ -146,12 +157,14 @@ struct vpe *get_vpe(int minor) { struct vpe *v; + if (!cpu_has_mipsmt) + return NULL; + list_for_each_entry(v, &vpecontrol.vpe_list, list) { if (v->minor == minor) return v; } - printk(KERN_DEBUG "VPE: get_vpe minor %d not found\n", minor); return NULL; } @@ -165,8 +178,6 @@ struct tc *get_tc(int index) return t; } - printk(KERN_DEBUG "VPE: get_tc index %d not found\n", index); - return NULL; } @@ -179,8 +190,6 @@ struct tc *get_tc_unused(void) return t; } - printk(KERN_DEBUG "VPE: All TC's are in use\n"); - return NULL; } @@ -190,13 +199,13 @@ struct vpe *alloc_vpe(int minor) struct vpe *v; if ((v = kzalloc(sizeof(struct vpe), GFP_KERNEL)) == NULL) { - printk(KERN_WARNING "VPE: alloc_vpe no mem\n"); return NULL; } INIT_LIST_HEAD(&v->tc); list_add_tail(&v->list, &vpecontrol.vpe_list); + INIT_LIST_HEAD(&v->notify); v->minor = minor; return v; } @@ -207,7 +216,6 @@ struct tc *alloc_tc(int index) struct tc *t; if ((t = kzalloc(sizeof(struct tc), GFP_KERNEL)) == NULL) { - printk(KERN_WARNING "VPE: alloc_tc no mem\n"); return NULL; } @@ -236,20 +244,16 @@ void dump_mtregs(void) printk("config3 0x%lx MT %ld\n", val, (val & CONFIG3_MT) >> CONFIG3_MT_SHIFT); - val = read_c0_mvpconf0(); - printk("mvpconf0 0x%lx, PVPE %ld PTC %ld M %ld\n", val, - (val & MVPCONF0_PVPE) >> MVPCONF0_PVPE_SHIFT, - val & MVPCONF0_PTC, (val & MVPCONF0_M) >> MVPCONF0_M_SHIFT); - val = read_c0_mvpcontrol(); printk("MVPControl 0x%lx, STLB %ld VPC %ld EVP %ld\n", val, (val & MVPCONTROL_STLB) >> MVPCONTROL_STLB_SHIFT, (val & MVPCONTROL_VPC) >> MVPCONTROL_VPC_SHIFT, (val & MVPCONTROL_EVP)); - val = read_c0_vpeconf0(); - printk("VPEConf0 0x%lx MVP %ld\n", val, - (val & VPECONF0_MVP) >> VPECONF0_MVP_SHIFT); + val = read_c0_mvpconf0(); + printk("mvpconf0 0x%lx, PVPE %ld PTC %ld M %ld\n", val, + (val & MVPCONF0_PVPE) >> MVPCONF0_PVPE_SHIFT, + val & MVPCONF0_PTC, (val & MVPCONF0_M) >> MVPCONF0_M_SHIFT); } /* Find some VPE program space */ @@ -354,9 +358,9 @@ static int apply_r_mips_gprel16(struct module *me, uint32_t *location, } if( (rel > 32768) || (rel < -32768) ) { - printk(KERN_ERR - "apply_r_mips_gprel16: relative address out of range 0x%x %d\n", - rel, rel); + printk(KERN_DEBUG "VPE loader: apply_r_mips_gprel16: " + "relative address 0x%x out of range of gp register\n", + rel); return -ENOEXEC; } @@ -374,8 +378,8 @@ static int apply_r_mips_pc16(struct module *me, uint32_t *location, rel -= 1; // and one instruction less due to the branch delay slot. if( (rel > 32768) || (rel < -32768) ) { - printk(KERN_ERR - "apply_r_mips_pc16: relative address out of range 0x%x\n", rel); + printk(KERN_DEBUG "VPE loader: " + "apply_r_mips_pc16: relative address out of range 0x%x\n", rel); return -ENOEXEC; } @@ -396,7 +400,8 @@ static int apply_r_mips_26(struct module *me, uint32_t *location, Elf32_Addr v) { if (v % 4) { - printk(KERN_ERR "module %s: dangerous relocation mod4\n", me->name); + printk(KERN_DEBUG "VPE loader: apply_r_mips_26 " + " unaligned relocation\n"); return -ENOEXEC; } @@ -459,12 +464,13 @@ static int apply_r_mips_lo16(struct module *me, uint32_t *location, /* * The value for the HI16 had best be the same. */ - if (v != l->value) { - printk("%d != %d\n", v, l->value); - goto out_danger; + if (v != l->value) { + printk(KERN_DEBUG "VPE loader: " + "apply_r_mips_lo16/hi16: " + "inconsistent value information\n"); + return -ENOEXEC; } - /* * Do the HI16 relocation. Note that we actually don't * need to know anything about the LO16 itself, except @@ -500,11 +506,6 @@ static int apply_r_mips_lo16(struct module *me, uint32_t *location, *location = insnlo; return 0; - -out_danger: - printk(KERN_ERR "module %s: dangerous " "relocation\n", me->name); - - return -ENOEXEC; } static int (*reloc_handlers[]) (struct module *me, uint32_t *location, @@ -518,6 +519,15 @@ static int (*reloc_handlers[]) (struct module *me, uint32_t *location, [R_MIPS_PC16] = apply_r_mips_pc16 }; +static char *rstrs[] = { + [R_MIPS_NONE] = "MIPS_NONE", + [R_MIPS_32] = "MIPS_32", + [R_MIPS_26] = "MIPS_26", + [R_MIPS_HI16] = "MIPS_HI16", + [R_MIPS_LO16] = "MIPS_LO16", + [R_MIPS_GPREL16] = "MIPS_GPREL16", + [R_MIPS_PC16] = "MIPS_PC16" +}; int apply_relocations(Elf32_Shdr *sechdrs, const char *strtab, @@ -552,15 +562,13 @@ int apply_relocations(Elf32_Shdr *sechdrs, res = reloc_handlers[ELF32_R_TYPE(r_info)](me, location, v); if( res ) { - printk(KERN_DEBUG - "relocation error 0x%x sym refer <%s> value 0x%x " - "type 0x%x r_info 0x%x\n", - (unsigned int)location, strtab + sym->st_name, v, - r_info, ELF32_R_TYPE(r_info)); - } - - if (res) + char *r = rstrs[ELF32_R_TYPE(r_info)]; + printk(KERN_WARNING "VPE loader: .text+0x%x " + "relocation type %s for symbol \"%s\" failed\n", + rel[i].r_offset, r ? r : "UNKNOWN", + strtab + sym->st_name); return res; + } } return 0; @@ -576,7 +584,7 @@ void save_gp_address(unsigned int secbase, unsigned int rel) /* Change all symbols so that sh_value encodes the pointer directly. */ -static int simplify_symbols(Elf_Shdr * sechdrs, +static void simplify_symbols(Elf_Shdr * sechdrs, unsigned int symindex, const char *strtab, const char *secstrings, @@ -585,18 +593,21 @@ static int simplify_symbols(Elf_Shdr * sechdrs, Elf_Sym *sym = (void *)sechdrs[symindex].sh_addr; unsigned long secbase, bssbase = 0; unsigned int i, n = sechdrs[symindex].sh_size / sizeof(Elf_Sym); - int ret = 0, size; + int size; /* find the .bss section for COMMON symbols */ for (i = 0; i < nsecs; i++) { - if (strncmp(secstrings + sechdrs[i].sh_name, ".bss", 4) == 0) + if (strncmp(secstrings + sechdrs[i].sh_name, ".bss", 4) == 0) { bssbase = sechdrs[i].sh_addr; + break; + } } for (i = 1; i < n; i++) { switch (sym[i].st_shndx) { case SHN_COMMON: - /* Allocate space for the symbol in the .bss section. st_value is currently size. + /* Allocate space for the symbol in the .bss section. + st_value is currently size. We want it to have the address of the symbol. */ size = sym[i].st_value; @@ -614,11 +625,9 @@ static int simplify_symbols(Elf_Shdr * sechdrs, break; case SHN_MIPS_SCOMMON: - - printk(KERN_DEBUG - "simplify_symbols: ignoring SHN_MIPS_SCOMMON symbol <%s> st_shndx %d\n", - strtab + sym[i].st_name, sym[i].st_shndx); - + printk(KERN_DEBUG "simplify_symbols: ignoring SHN_MIPS_SCOMMON" + "symbol <%s> st_shndx %d\n", strtab + sym[i].st_name, + sym[i].st_shndx); // .sbss section break; @@ -632,10 +641,7 @@ static int simplify_symbols(Elf_Shdr * sechdrs, sym[i].st_value += secbase; break; } - } - - return ret; } #ifdef DEBUG_ELFLOADER @@ -655,9 +661,26 @@ static void dump_elfsymbols(Elf_Shdr * sechdrs, unsigned int symindex, static void dump_tc(struct tc *t) { - printk(KERN_WARNING "VPE: TC index %d TCStatus 0x%lx halt 0x%lx\n", - t->index, read_tc_c0_tcstatus(), read_tc_c0_tchalt()); - printk(KERN_WARNING "VPE: tcrestart 0x%lx\n", read_tc_c0_tcrestart()); + unsigned long val; + + settc(t->index); + printk(KERN_DEBUG "VPE loader: TC index %d targtc %ld " + "TCStatus 0x%lx halt 0x%lx\n", + t->index, read_c0_vpecontrol() & VPECONTROL_TARGTC, + read_tc_c0_tcstatus(), read_tc_c0_tchalt()); + + printk(KERN_DEBUG " tcrestart 0x%lx\n", read_tc_c0_tcrestart()); + printk(KERN_DEBUG " tcbind 0x%lx\n", read_tc_c0_tcbind()); + + val = read_c0_vpeconf0(); + printk(KERN_DEBUG " VPEConf0 0x%lx MVP %ld\n", val, + (val & VPECONF0_MVP) >> VPECONF0_MVP_SHIFT); + + printk(KERN_DEBUG " c0 status 0x%lx\n", read_vpe_c0_status()); + printk(KERN_DEBUG " c0 cause 0x%lx\n", read_vpe_c0_cause()); + + printk(KERN_DEBUG " c0 badvaddr 0x%lx\n", read_vpe_c0_badvaddr()); + printk(KERN_DEBUG " c0 epc 0x%lx\n", read_vpe_c0_epc()); } static void dump_tclist(void) @@ -672,96 +695,108 @@ static void dump_tclist(void) /* We are prepared so configure and start the VPE... */ int vpe_run(struct vpe * v) { - unsigned long val; + struct vpe_notifications *n; + unsigned long val, dmt_flag; struct tc *t; /* check we are the Master VPE */ val = read_c0_vpeconf0(); if (!(val & VPECONF0_MVP)) { printk(KERN_WARNING - "VPE: only Master VPE's are allowed to configure MT\n"); + "VPE loader: only Master VPE's are allowed to configure MT\n"); return -1; } /* disable MT (using dvpe) */ dvpe(); + if (!list_empty(&v->tc)) { + if ((t = list_entry(v->tc.next, struct tc, tc)) == NULL) { + printk(KERN_WARNING "VPE loader: TC %d is already in use.\n", + t->index); + return -ENOEXEC; + } + } else { + printk(KERN_WARNING "VPE loader: No TC's associated with VPE %d\n", + v->minor); + return -ENOEXEC; + } + /* Put MVPE's into 'configuration state' */ set_c0_mvpcontrol(MVPCONTROL_VPC); - if (!list_empty(&v->tc)) { - if ((t = list_entry(v->tc.next, struct tc, tc)) == NULL) { - printk(KERN_WARNING "VPE: TC %d is already in use.\n", - t->index); - return -ENOEXEC; - } - } else { - printk(KERN_WARNING "VPE: No TC's associated with VPE %d\n", - v->minor); - return -ENOEXEC; - } - settc(t->index); - val = read_vpe_c0_vpeconf0(); - /* should check it is halted, and not activated */ if ((read_tc_c0_tcstatus() & TCSTATUS_A) || !(read_tc_c0_tchalt() & TCHALT_H)) { - printk(KERN_WARNING "VPE: TC %d is already doing something!\n", + printk(KERN_WARNING "VPE loader: TC %d is already doing something!\n", t->index); - dump_tclist(); return -ENOEXEC; } + /* + * Disable multi-threaded execution whilst we activate, clear the + * halt bit and bound the tc to the other VPE... + */ + dmt_flag = dmt(); + /* Write the address we want it to start running from in the TCPC register. */ write_tc_c0_tcrestart((unsigned long)v->__start); - - /* write the sivc_info address to tccontext */ write_tc_c0_tccontext((unsigned long)0); - - /* Set up the XTC bit in vpeconf0 to point at our tc */ - write_vpe_c0_vpeconf0(read_vpe_c0_vpeconf0() | (t->index << VPECONF0_XTC_SHIFT)); - - /* mark the TC as activated, not interrupt exempt and not dynamically allocatable */ + /* + * Mark the TC as activated, not interrupt exempt and not dynamically + * allocatable + */ val = read_tc_c0_tcstatus(); val = (val & ~(TCSTATUS_DA | TCSTATUS_IXMT)) | TCSTATUS_A; write_tc_c0_tcstatus(val); write_tc_c0_tchalt(read_tc_c0_tchalt() & ~TCHALT_H); - /* set up VPE1 */ - write_vpe_c0_vpecontrol(read_vpe_c0_vpecontrol() & ~VPECONTROL_TE); // no multiple TC's - write_vpe_c0_vpeconf0(read_vpe_c0_vpeconf0() | VPECONF0_VPA); // enable this VPE - /* * The sde-kit passes 'memsize' to __start in $a3, so set something - * here... - * Or set $a3 (register 7) to zero and define DFLT_STACK_SIZE and + * here... Or set $a3 to zero and define DFLT_STACK_SIZE and * DFLT_HEAP_SIZE when you compile your program */ + mttgpr(7, physical_memsize); + + + /* set up VPE1 */ + /* + * bind the TC to VPE 1 as late as possible so we only have the final + * VPE registers to set up, and so an EJTAG probe can trigger on it + */ + write_tc_c0_tcbind((read_tc_c0_tcbind() & ~TCBIND_CURVPE) | v->minor); - mttgpr(7, 0); + /* Set up the XTC bit in vpeconf0 to point at our tc */ + write_vpe_c0_vpeconf0( (read_vpe_c0_vpeconf0() & ~(VPECONF0_XTC)) + | (t->index << VPECONF0_XTC_SHIFT)); - /* set config to be the same as vpe0, particularly kseg0 coherency alg */ - write_vpe_c0_config(read_c0_config()); + /* enable this VPE */ + write_vpe_c0_vpeconf0(read_vpe_c0_vpeconf0() | VPECONF0_VPA); /* clear out any left overs from a previous program */ + write_vpe_c0_status(0); write_vpe_c0_cause(0); /* take system out of configuration state */ clear_c0_mvpcontrol(MVPCONTROL_VPC); - /* clear interrupts enabled IE, ERL, EXL, and KSU from c0 status */ - write_vpe_c0_status(read_vpe_c0_status() & ~(ST0_ERL | ST0_KSU | ST0_IE | ST0_EXL)); + /* now safe to re-enable multi-threading */ + emt(dmt_flag); /* set it running */ evpe(EVPE_ENABLE); + list_for_each_entry(n, &v->notify, list) { + n->start(v->minor); + } + return 0; } -static unsigned long find_vpe_symbols(struct vpe * v, Elf_Shdr * sechdrs, +static int find_vpe_symbols(struct vpe * v, Elf_Shdr * sechdrs, unsigned int symindex, const char *strtab, struct module *mod) { @@ -778,26 +813,28 @@ static unsigned long find_vpe_symbols(struct vpe * v, Elf_Shdr * sechdrs, } } + if ( (v->__start == 0) || (v->shared_ptr == NULL)) + return -1; + return 0; } /* - * Allocates a VPE with some program code space(the load address), copies - * the contents of the program (p)buffer performing relocatations/etc, - * free's it when finished. -*/ + * Allocates a VPE with some program code space(the load address), copies the + * contents of the program (p)buffer performing relocatations/etc, free's it + * when finished. + */ int vpe_elfload(struct vpe * v) { Elf_Ehdr *hdr; Elf_Shdr *sechdrs; long err = 0; char *secstrings, *strtab = NULL; - unsigned int len, i, symindex = 0, strindex = 0; - + unsigned int len, i, symindex = 0, strindex = 0, relocate = 0; struct module mod; // so we can re-use the relocations code memset(&mod, 0, sizeof(struct module)); - strcpy(mod.name, "VPE dummy prog module"); + strcpy(mod.name, "VPE loader"); hdr = (Elf_Ehdr *) v->pbuffer; len = v->plen; @@ -805,16 +842,22 @@ int vpe_elfload(struct vpe * v) /* Sanity checks against insmoding binaries or wrong arch, weird elf version */ if (memcmp(hdr->e_ident, ELFMAG, 4) != 0 - || hdr->e_type != ET_REL || !elf_check_arch(hdr) + || (hdr->e_type != ET_REL && hdr->e_type != ET_EXEC) + || !elf_check_arch(hdr) || hdr->e_shentsize != sizeof(*sechdrs)) { printk(KERN_WARNING - "VPE program, wrong arch or weird elf version\n"); + "VPE loader: program wrong arch or weird elf version\n"); return -ENOEXEC; } + if (hdr->e_type == ET_REL) + relocate = 1; + if (len < hdr->e_shoff + hdr->e_shnum * sizeof(Elf_Shdr)) { - printk(KERN_ERR "VPE program length %u truncated\n", len); + printk(KERN_ERR "VPE loader: program length %u truncated\n", + len); + return -ENOEXEC; } @@ -826,82 +869,126 @@ int vpe_elfload(struct vpe * v) /* And these should exist, but gcc whinges if we don't init them */ symindex = strindex = 0; - for (i = 1; i < hdr->e_shnum; i++) { - - if (sechdrs[i].sh_type != SHT_NOBITS - && len < sechdrs[i].sh_offset + sechdrs[i].sh_size) { - printk(KERN_ERR "VPE program length %u truncated\n", - len); - return -ENOEXEC; - } + if (relocate) { + for (i = 1; i < hdr->e_shnum; i++) { + if (sechdrs[i].sh_type != SHT_NOBITS + && len < sechdrs[i].sh_offset + sechdrs[i].sh_size) { + printk(KERN_ERR "VPE program length %u truncated\n", + len); + return -ENOEXEC; + } - /* Mark all sections sh_addr with their address in the - temporary image. */ - sechdrs[i].sh_addr = (size_t) hdr + sechdrs[i].sh_offset; + /* Mark all sections sh_addr with their address in the + temporary image. */ + sechdrs[i].sh_addr = (size_t) hdr + sechdrs[i].sh_offset; - /* Internal symbols and strings. */ - if (sechdrs[i].sh_type == SHT_SYMTAB) { - symindex = i; - strindex = sechdrs[i].sh_link; - strtab = (char *)hdr + sechdrs[strindex].sh_offset; + /* Internal symbols and strings. */ + if (sechdrs[i].sh_type == SHT_SYMTAB) { + symindex = i; + strindex = sechdrs[i].sh_link; + strtab = (char *)hdr + sechdrs[strindex].sh_offset; + } } + layout_sections(&mod, hdr, sechdrs, secstrings); } - layout_sections(&mod, hdr, sechdrs, secstrings); - v->load_addr = alloc_progmem(mod.core_size); memset(v->load_addr, 0, mod.core_size); - printk("VPE elf_loader: loading to %p\n", v->load_addr); + printk("VPE loader: loading to %p\n", v->load_addr); - for (i = 0; i < hdr->e_shnum; i++) { - void *dest; + if (relocate) { + for (i = 0; i < hdr->e_shnum; i++) { + void *dest; - if (!(sechdrs[i].sh_flags & SHF_ALLOC)) - continue; + if (!(sechdrs[i].sh_flags & SHF_ALLOC)) + continue; - dest = v->load_addr + sechdrs[i].sh_entsize; + dest = v->load_addr + sechdrs[i].sh_entsize; - if (sechdrs[i].sh_type != SHT_NOBITS) - memcpy(dest, (void *)sechdrs[i].sh_addr, - sechdrs[i].sh_size); - /* Update sh_addr to point to copy in image. */ - sechdrs[i].sh_addr = (unsigned long)dest; - } + if (sechdrs[i].sh_type != SHT_NOBITS) + memcpy(dest, (void *)sechdrs[i].sh_addr, + sechdrs[i].sh_size); + /* Update sh_addr to point to copy in image. */ + sechdrs[i].sh_addr = (unsigned long)dest; - /* Fix up syms, so that st_value is a pointer to location. */ - err = - simplify_symbols(sechdrs, symindex, strtab, secstrings, - hdr->e_shnum, &mod); - if (err < 0) { - printk(KERN_WARNING "VPE: unable to simplify symbols\n"); - goto cleanup; - } + printk(KERN_DEBUG " section sh_name %s sh_addr 0x%x\n", + secstrings + sechdrs[i].sh_name, sechdrs[i].sh_addr); + } - /* Now do relocations. */ - for (i = 1; i < hdr->e_shnum; i++) { - const char *strtab = (char *)sechdrs[strindex].sh_addr; - unsigned int info = sechdrs[i].sh_info; - - /* Not a valid relocation section? */ - if (info >= hdr->e_shnum) - continue; - - /* Don't bother with non-allocated sections */ - if (!(sechdrs[info].sh_flags & SHF_ALLOC)) - continue; - - if (sechdrs[i].sh_type == SHT_REL) - err = - apply_relocations(sechdrs, strtab, symindex, i, &mod); - else if (sechdrs[i].sh_type == SHT_RELA) - err = apply_relocate_add(sechdrs, strtab, symindex, i, - &mod); - if (err < 0) { - printk(KERN_WARNING - "vpe_elfload: error in relocations err %ld\n", - err); - goto cleanup; + /* Fix up syms, so that st_value is a pointer to location. */ + simplify_symbols(sechdrs, symindex, strtab, secstrings, + hdr->e_shnum, &mod); + + /* Now do relocations. */ + for (i = 1; i < hdr->e_shnum; i++) { + const char *strtab = (char *)sechdrs[strindex].sh_addr; + unsigned int info = sechdrs[i].sh_info; + + /* Not a valid relocation section? */ + if (info >= hdr->e_shnum) + continue; + + /* Don't bother with non-allocated sections */ + if (!(sechdrs[info].sh_flags & SHF_ALLOC)) + continue; + + if (sechdrs[i].sh_type == SHT_REL) + err = apply_relocations(sechdrs, strtab, symindex, i, + &mod); + else if (sechdrs[i].sh_type == SHT_RELA) + err = apply_relocate_add(sechdrs, strtab, symindex, i, + &mod); + if (err < 0) + return err; + + } + } else { + for (i = 0; i < hdr->e_shnum; i++) { + + /* Internal symbols and strings. */ + if (sechdrs[i].sh_type == SHT_SYMTAB) { + symindex = i; + strindex = sechdrs[i].sh_link; + strtab = (char *)hdr + sechdrs[strindex].sh_offset; + + /* mark the symtab's address for when we try to find the + magic symbols */ + sechdrs[i].sh_addr = (size_t) hdr + sechdrs[i].sh_offset; + } + + /* filter sections we dont want in the final image */ + if (!(sechdrs[i].sh_flags & SHF_ALLOC) || + (sechdrs[i].sh_type == SHT_MIPS_REGINFO)) { + printk( KERN_DEBUG " ignoring section, " + "name %s type %x address 0x%x \n", + secstrings + sechdrs[i].sh_name, + sechdrs[i].sh_type, sechdrs[i].sh_addr); + continue; + } + + if (sechdrs[i].sh_addr < (unsigned int)v->load_addr) { + printk( KERN_WARNING "VPE loader: " + "fully linked image has invalid section, " + "name %s type %x address 0x%x, before load " + "address of 0x%x\n", + secstrings + sechdrs[i].sh_name, + sechdrs[i].sh_type, sechdrs[i].sh_addr, + (unsigned int)v->load_addr); + return -ENOEXEC; + } + + printk(KERN_DEBUG " copying section sh_name %s, sh_addr 0x%x " + "size 0x%x0 from x%p\n", + secstrings + sechdrs[i].sh_name, sechdrs[i].sh_addr, + sechdrs[i].sh_size, hdr + sechdrs[i].sh_offset); + + if (sechdrs[i].sh_type != SHT_NOBITS) + memcpy((void *)sechdrs[i].sh_addr, + (char *)hdr + sechdrs[i].sh_offset, + sechdrs[i].sh_size); + else + memset((void *)sechdrs[i].sh_addr, 0, sechdrs[i].sh_size); } } @@ -910,71 +997,104 @@ int vpe_elfload(struct vpe * v) (unsigned long)v->load_addr + v->len); if ((find_vpe_symbols(v, sechdrs, symindex, strtab, &mod)) < 0) { + if (v->__start == 0) { + printk(KERN_WARNING "VPE loader: program does not contain " + "a __start symbol\n"); + return -ENOEXEC; + } - printk(KERN_WARNING - "VPE: program doesn't contain __start or vpe_shared symbols\n"); - err = -ENOEXEC; + if (v->shared_ptr == NULL) + printk(KERN_WARNING "VPE loader: " + "program does not contain vpe_shared symbol.\n" + " Unable to use AMVP (AP/SP) facilities.\n"); } printk(" elf loaded\n"); - -cleanup: - return err; + return 0; } -static void dump_vpe(struct vpe * v) +__attribute_used__ void dump_vpe(struct vpe * v) { struct tc *t; + settc(v->minor); + printk(KERN_DEBUG "VPEControl 0x%lx\n", read_vpe_c0_vpecontrol()); printk(KERN_DEBUG "VPEConf0 0x%lx\n", read_vpe_c0_vpeconf0()); - list_for_each_entry(t, &vpecontrol.tc_list, list) { + list_for_each_entry(t, &vpecontrol.tc_list, list) dump_tc(t); - } } -/* checks for VPE is unused and gets ready to load program */ +static void cleanup_tc(struct tc *tc) +{ + int tmp; + + /* Put MVPE's into 'configuration state' */ + set_c0_mvpcontrol(MVPCONTROL_VPC); + + settc(tc->index); + tmp = read_tc_c0_tcstatus(); + + /* mark not allocated and not dynamically allocatable */ + tmp &= ~(TCSTATUS_A | TCSTATUS_DA); + tmp |= TCSTATUS_IXMT; /* interrupt exempt */ + write_tc_c0_tcstatus(tmp); + + write_tc_c0_tchalt(TCHALT_H); + + /* bind it to anything other than VPE1 */ + write_tc_c0_tcbind(read_tc_c0_tcbind() & ~TCBIND_CURVPE); // | TCBIND_CURVPE + + clear_c0_mvpcontrol(MVPCONTROL_VPC); +} + +static int getcwd(char *buff, int size) +{ + mm_segment_t old_fs; + int ret; + + old_fs = get_fs(); + set_fs(KERNEL_DS); + + ret = sys_getcwd(buff,size); + + set_fs(old_fs); + + return ret; +} + +/* checks VPE is unused and gets ready to load program */ static int vpe_open(struct inode *inode, struct file *filp) { - int minor; + int minor, ret; struct vpe *v; + struct vpe_notifications *not; /* assume only 1 device at the mo. */ if ((minor = MINOR(inode->i_rdev)) != 1) { - printk(KERN_WARNING "VPE: only vpe1 is supported\n"); + printk(KERN_WARNING "VPE loader: only vpe1 is supported\n"); return -ENODEV; } if ((v = get_vpe(minor)) == NULL) { - printk(KERN_WARNING "VPE: unable to get vpe\n"); + printk(KERN_WARNING "VPE loader: unable to get vpe\n"); return -ENODEV; } if (v->state != VPE_STATE_UNUSED) { - unsigned long tmp; - struct tc *t; - - printk(KERN_WARNING "VPE: device %d already in use\n", minor); - dvpe(); - dump_vpe(v); - - printk(KERN_WARNING "VPE: re-initialising %d\n", minor); - - release_progmem(v->load_addr); - t = get_tc(minor); - settc(minor); - tmp = read_tc_c0_tcstatus(); + printk(KERN_DEBUG "VPE loader: tc in use dumping regs\n"); - /* mark not allocated and not dynamically allocatable */ - tmp &= ~(TCSTATUS_A | TCSTATUS_DA); - tmp |= TCSTATUS_IXMT; /* interrupt exempt */ - write_tc_c0_tcstatus(tmp); + dump_tc(get_tc(minor)); - write_tc_c0_tchalt(TCHALT_H); + list_for_each_entry(not, &v->notify, list) { + not->stop(minor); + } + release_progmem(v->load_addr); + cleanup_tc(get_tc(minor)); } // allocate it so when we get write ops we know it's expected. @@ -986,6 +1106,24 @@ static int vpe_open(struct inode *inode, struct file *filp) v->load_addr = NULL; v->len = 0; + v->uid = filp->f_uid; + v->gid = filp->f_gid; + +#ifdef CONFIG_MIPS_APSP_KSPD + /* get kspd to tell us when a syscall_exit happens */ + if (!kspd_events_reqd) { + kspd_notify(&kspd_events); + kspd_events_reqd++; + } +#endif + + v->cwd[0] = 0; + ret = getcwd(v->cwd, VPE_PATH_MAX); + if (ret < 0) + printk(KERN_WARNING "VPE loader: open, getcwd returned %d\n", ret); + + v->shared_ptr = NULL; + v->__start = 0; return 0; } @@ -1006,14 +1144,22 @@ static int vpe_release(struct inode *inode, struct file *filp) if (vpe_elfload(v) >= 0) vpe_run(v); else { - printk(KERN_WARNING "VPE: ELF load failed.\n"); + printk(KERN_WARNING "VPE loader: ELF load failed.\n"); ret = -ENOEXEC; } } else { - printk(KERN_WARNING "VPE: only elf files are supported\n"); + printk(KERN_WARNING "VPE loader: only elf files are supported\n"); ret = -ENOEXEC; } + /* It's good to be able to run the SP and if it chokes have a look at + the /dev/rt?. But if we reset the pointer to the shared struct we + loose what has happened. So perhaps if garbage is sent to the vpe + device, use it as a trigger for the reset. Hopefully a nice + executable will be along shortly. */ + if (ret < 0) + v->shared_ptr = NULL; + // cleanup any temp buffers if (v->pbuffer) vfree(v->pbuffer); @@ -1033,21 +1179,19 @@ static ssize_t vpe_write(struct file *file, const char __user * buffer, return -ENODEV; if (v->pbuffer == NULL) { - printk(KERN_ERR "vpe_write: no pbuffer\n"); + printk(KERN_ERR "VPE loader: no buffer for program\n"); return -ENOMEM; } if ((count + v->len) > v->plen) { printk(KERN_WARNING - "VPE Loader: elf size too big. Perhaps strip uneeded symbols\n"); + "VPE loader: elf size too big. Perhaps strip uneeded symbols\n"); return -ENOMEM; } count -= copy_from_user(v->pbuffer + v->len, buffer, count); - if (!count) { - printk("vpe_write: copy_to_user failed\n"); + if (!count) return -EFAULT; - } v->len += count; return ret; @@ -1149,16 +1293,70 @@ void *vpe_get_shared(int index) { struct vpe *v; - if ((v = get_vpe(index)) == NULL) { - printk(KERN_WARNING "vpe: invalid vpe index %d\n", index); + if ((v = get_vpe(index)) == NULL) return NULL; - } return v->shared_ptr; } EXPORT_SYMBOL(vpe_get_shared); +int vpe_getuid(int index) +{ + struct vpe *v; + + if ((v = get_vpe(index)) == NULL) + return -1; + + return v->uid; +} + +EXPORT_SYMBOL(vpe_getuid); + +int vpe_getgid(int index) +{ + struct vpe *v; + + if ((v = get_vpe(index)) == NULL) + return -1; + + return v->gid; +} + +EXPORT_SYMBOL(vpe_getgid); + +int vpe_notify(int index, struct vpe_notifications *notify) +{ + struct vpe *v; + + if ((v = get_vpe(index)) == NULL) + return -1; + + list_add(¬ify->list, &v->notify); + return 0; +} + +EXPORT_SYMBOL(vpe_notify); + +char *vpe_getcwd(int index) +{ + struct vpe *v; + + if ((v = get_vpe(index)) == NULL) + return NULL; + + return v->cwd; +} + +EXPORT_SYMBOL(vpe_getcwd); + +#ifdef CONFIG_MIPS_APSP_KSPD +static void kspd_sp_exit( int sp_id) +{ + cleanup_tc(get_tc(sp_id)); +} +#endif + static int __init vpe_module_init(void) { struct vpe *v = NULL; @@ -1201,7 +1399,8 @@ static int __init vpe_module_init(void) return -ENODEV; } - list_add(&t->tc, &v->tc); /* add the tc to the list of this vpe's tc's. */ + /* add the tc to the list of this vpe's tc's. */ + list_add(&t->tc, &v->tc); /* deactivate all but vpe0 */ if (i != 0) { @@ -1222,10 +1421,12 @@ static int __init vpe_module_init(void) ~(ST0_IM | ST0_IE | ST0_KSU)) | ST0_CU0); - /* set config to be the same as vpe0, particularly kseg0 coherency alg */ + /* + * Set config to be the same as vpe0, + * particularly kseg0 coherency alg + */ write_vpe_c0_config(read_c0_config()); } - } /* TC's */ @@ -1234,23 +1435,28 @@ static int __init vpe_module_init(void) if (i != 0) { unsigned long tmp; - /* tc 0 will of course be running.... */ - if (i == 0) - t->state = TC_STATE_RUNNING; - settc(i); - /* bind a TC to each VPE, May as well put all excess TC's - on the last VPE */ - if (i >= (((val & MVPCONF0_PVPE) >> MVPCONF0_PVPE_SHIFT) + 1)) - write_tc_c0_tcbind(read_tc_c0_tcbind() | - ((val & MVPCONF0_PVPE) >> MVPCONF0_PVPE_SHIFT)); - else - write_tc_c0_tcbind(read_tc_c0_tcbind() | i); + /* Any TC that is bound to VPE0 gets left as is - in case + we are running SMTC on VPE0. A TC that is bound to any + other VPE gets bound to VPE0, ideally I'd like to make + it homeless but it doesn't appear to let me bind a TC + to a non-existent VPE. Which is perfectly reasonable. + + The (un)bound state is visible to an EJTAG probe so may + notify GDB... + */ + + if (((tmp = read_tc_c0_tcbind()) & TCBIND_CURVPE)) { + /* tc is bound >vpe0 */ + write_tc_c0_tcbind(tmp & ~TCBIND_CURVPE); + + t->pvpe = get_vpe(0); /* set the parent vpe */ + } tmp = read_tc_c0_tcstatus(); - /* mark not allocated and not dynamically allocatable */ + /* mark not activated and not dynamically allocatable */ tmp &= ~(TCSTATUS_A | TCSTATUS_DA); tmp |= TCSTATUS_IXMT; /* interrupt exempt */ write_tc_c0_tcstatus(tmp); @@ -1262,6 +1468,9 @@ static int __init vpe_module_init(void) /* release config state */ clear_c0_mvpcontrol(MVPCONTROL_VPC); +#ifdef CONFIG_MIPS_APSP_KSPD + kspd_events.kspd_sp_exit = kspd_sp_exit; +#endif return 0; } @@ -1281,5 +1490,5 @@ static void __exit vpe_module_exit(void) module_init(vpe_module_init); module_exit(vpe_module_exit); MODULE_DESCRIPTION("MIPS VPE Loader"); -MODULE_AUTHOR("Elizabeth Clarke, MIPS Technologies, Inc"); +MODULE_AUTHOR("Elizabeth Oldham, MIPS Technologies, Inc."); MODULE_LICENSE("GPL"); -- cgit v1.2.3 From 41c594ab65fc89573af296d192aa5235d09717ab Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Wed, 5 Apr 2006 09:45:45 +0100 Subject: [MIPS] MT: Improved multithreading support. Signed-off-by: Ralf Baechle --- arch/mips/Kconfig | 6 +- arch/mips/kernel/Makefile | 4 +- arch/mips/kernel/asm-offsets.c | 3 + arch/mips/kernel/entry.S | 34 + arch/mips/kernel/gdb-low.S | 24 +- arch/mips/kernel/gdb-stub.c | 61 +- arch/mips/kernel/genex.S | 29 + arch/mips/kernel/head.S | 57 ++ arch/mips/kernel/i8259.c | 4 + arch/mips/kernel/irq-msc01.c | 9 + arch/mips/kernel/irq.c | 13 + arch/mips/kernel/mips-mt.c | 449 +++++++++++ arch/mips/kernel/process.c | 10 +- arch/mips/kernel/ptrace.c | 14 + arch/mips/kernel/ptrace32.c | 14 + arch/mips/kernel/r4k_switch.S | 34 +- arch/mips/kernel/smp-mt.c | 349 ++++++++ arch/mips/kernel/smp.c | 10 + arch/mips/kernel/smp_mt.c | 342 -------- arch/mips/kernel/smtc-asm.S | 130 +++ arch/mips/kernel/smtc-proc.c | 93 +++ arch/mips/kernel/smtc.c | 1322 +++++++++++++++++++++++++++++++ arch/mips/kernel/time.c | 3 +- arch/mips/kernel/traps.c | 124 ++- arch/mips/kernel/vmlinux.lds.S | 2 +- arch/mips/mips-boards/generic/init.c | 1 - arch/mips/mips-boards/generic/time.c | 68 +- arch/mips/mips-boards/malta/Makefile | 1 + arch/mips/mips-boards/malta/malta_int.c | 11 +- arch/mips/mips-boards/malta/malta_smp.c | 128 +++ arch/mips/mips-boards/sim/cmdline.c | 59 -- arch/mips/mips-boards/sim/sim_cmdline.c | 6 +- arch/mips/mips-boards/sim/sim_smp.c | 14 - arch/mips/mm/fault.c | 13 +- arch/mips/mm/tlb-r4k.c | 85 +- arch/mips/mm/tlbex.c | 83 +- 36 files changed, 3125 insertions(+), 484 deletions(-) create mode 100644 arch/mips/kernel/mips-mt.c create mode 100644 arch/mips/kernel/smp-mt.c delete mode 100644 arch/mips/kernel/smp_mt.c create mode 100644 arch/mips/kernel/smtc-asm.S create mode 100644 arch/mips/kernel/smtc-proc.c create mode 100644 arch/mips/kernel/smtc.c create mode 100644 arch/mips/mips-boards/malta/malta_smp.c delete mode 100644 arch/mips/mips-boards/sim/cmdline.c (limited to 'arch') diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig index a7bac0459f9..f9be549645e 100644 --- a/arch/mips/Kconfig +++ b/arch/mips/Kconfig @@ -1447,6 +1447,10 @@ choice prompt "MIPS MT options" depends on MIPS_MT +config MIPS_MT_SMTC + bool "SMTC: Use all TCs on all VPEs for SMP" + select SMP + config MIPS_MT_SMP bool "Use 1 TC on each available VPE for SMP" select SMP @@ -1613,7 +1617,7 @@ source "mm/Kconfig" config SMP bool "Multi-Processing support" - depends on CPU_RM9000 || ((SIBYTE_BCM1x80 || SIBYTE_BCM1x55 || SIBYTE_SB1250 || QEMU) && !SIBYTE_STANDALONE) || SGI_IP27 || MIPS_MT_SMP + depends on CPU_RM9000 || ((SIBYTE_BCM1x80 || SIBYTE_BCM1x55 || SIBYTE_SB1250 || QEMU) && !SIBYTE_STANDALONE) || SGI_IP27 || MIPS_MT_SMP || MIPS_MT_SMTC ---help--- This enables support for systems with more than one CPU. If you have a system with only one CPU, like most personal computers, say N. If diff --git a/arch/mips/kernel/Makefile b/arch/mips/kernel/Makefile index 9ec01de81c0..34e8a256765 100644 --- a/arch/mips/kernel/Makefile +++ b/arch/mips/kernel/Makefile @@ -34,7 +34,9 @@ obj-$(CONFIG_CPU_R6000) += r6000_fpu.o r4k_switch.o obj-$(CONFIG_SMP) += smp.o -obj-$(CONFIG_MIPS_MT_SMP) += smp_mt.o +obj-$(CONFIG_MIPS_MT) += mips-mt.o +obj-$(CONFIG_MIPS_MT_SMTC) += smtc.o smtc-asm.o smtc-proc.o +obj-$(CONFIG_MIPS_MT_SMP) += smp-mt.o obj-$(CONFIG_MIPS_APSP_KSPD) += kspd.o obj-$(CONFIG_MIPS_VPE_LOADER) += vpe.o diff --git a/arch/mips/kernel/asm-offsets.c b/arch/mips/kernel/asm-offsets.c index ca6b03c773b..92b28b674d6 100644 --- a/arch/mips/kernel/asm-offsets.c +++ b/arch/mips/kernel/asm-offsets.c @@ -69,6 +69,9 @@ void output_ptreg_defines(void) offset("#define PT_BVADDR ", struct pt_regs, cp0_badvaddr); offset("#define PT_STATUS ", struct pt_regs, cp0_status); offset("#define PT_CAUSE ", struct pt_regs, cp0_cause); +#ifdef CONFIG_MIPS_MT_SMTC + offset("#define PT_TCSTATUS ", struct pt_regs, cp0_tcstatus); +#endif /* CONFIG_MIPS_MT_SMTC */ size("#define PT_SIZE ", struct pt_regs); linefeed; } diff --git a/arch/mips/kernel/entry.S b/arch/mips/kernel/entry.S index b1939a486d2..d101d2fb24c 100644 --- a/arch/mips/kernel/entry.S +++ b/arch/mips/kernel/entry.S @@ -17,6 +17,9 @@ #include #include #include +#ifdef CONFIG_MIPS_MT_SMTC +#include +#endif #ifdef CONFIG_PREEMPT .macro preempt_stop @@ -75,6 +78,37 @@ FEXPORT(syscall_exit) bnez t0, syscall_exit_work FEXPORT(restore_all) # restore full frame +#ifdef CONFIG_MIPS_MT_SMTC +/* Detect and execute deferred IPI "interrupts" */ + move a0,sp + jal deferred_smtc_ipi +/* Re-arm any temporarily masked interrupts not explicitly "acked" */ + mfc0 v0, CP0_TCSTATUS + ori v1, v0, TCSTATUS_IXMT + mtc0 v1, CP0_TCSTATUS + andi v0, TCSTATUS_IXMT + ehb + mfc0 t0, CP0_TCCONTEXT + DMT 9 # dmt t1 + jal mips_ihb + mfc0 t2, CP0_STATUS + andi t3, t0, 0xff00 + or t2, t2, t3 + mtc0 t2, CP0_STATUS + ehb + andi t1, t1, VPECONTROL_TE + beqz t1, 1f + EMT +1: + mfc0 v1, CP0_TCSTATUS + /* We set IXMT above, XOR should cler it here */ + xori v1, v1, TCSTATUS_IXMT + or v1, v0, v1 + mtc0 v1, CP0_TCSTATUS + ehb + xor t0, t0, t3 + mtc0 t0, CP0_TCCONTEXT +#endif /* CONFIG_MIPS_MT_SMTC */ .set noat RESTORE_TEMP RESTORE_AT diff --git a/arch/mips/kernel/gdb-low.S b/arch/mips/kernel/gdb-low.S index 235ad9f6bd3..10f28fb9f00 100644 --- a/arch/mips/kernel/gdb-low.S +++ b/arch/mips/kernel/gdb-low.S @@ -283,11 +283,33 @@ */ 3: +#ifdef CONFIG_MIPS_MT_SMTC + /* Read-modify write of Status must be atomic */ + mfc0 t2, CP0_TCSTATUS + ori t1, t2, TCSTATUS_IXMT + mtc0 t1, CP0_TCSTATUS + andi t2, t2, TCSTATUS_IXMT + ehb + DMT 9 # dmt t1 + jal mips_ihb + nop +#endif /* CONFIG_MIPS_MT_SMTC */ mfc0 t0, CP0_STATUS ori t0, 0x1f xori t0, 0x1f mtc0 t0, CP0_STATUS - +#ifdef CONFIG_MIPS_MT_SMTC + andi t1, t1, VPECONTROL_TE + beqz t1, 9f + nop + EMT # emt +9: + mfc0 t1, CP0_TCSTATUS + xori t1, t1, TCSTATUS_IXMT + or t1, t1, t2 + mtc0 t1, CP0_TCSTATUS + ehb +#endif /* CONFIG_MIPS_MT_SMTC */ LONG_L v0, GDB_FR_STATUS(sp) LONG_L v1, GDB_FR_EPC(sp) mtc0 v0, CP0_STATUS diff --git a/arch/mips/kernel/gdb-stub.c b/arch/mips/kernel/gdb-stub.c index d4f88e0af24..6ecbdc1fefd 100644 --- a/arch/mips/kernel/gdb-stub.c +++ b/arch/mips/kernel/gdb-stub.c @@ -140,6 +140,7 @@ #include #include #include +#include /* * external low-level support routines @@ -669,6 +670,64 @@ static void kgdb_wait(void *arg) local_irq_restore(flags); } +/* + * GDB stub needs to call kgdb_wait on all processor with interrupts + * disabled, so it uses it's own special variant. + */ +static int kgdb_smp_call_kgdb_wait(void) +{ +#ifdef CONFIG_SMP + struct call_data_struct data; + int i, cpus = num_online_cpus() - 1; + int cpu = smp_processor_id(); + + /* + * Can die spectacularly if this CPU isn't yet marked online + */ + BUG_ON(!cpu_online(cpu)); + + if (!cpus) + return 0; + + if (spin_is_locked(&smp_call_lock)) { + /* + * Some other processor is trying to make us do something + * but we're not going to respond... give up + */ + return -1; + } + + /* + * We will continue here, accepting the fact that + * the kernel may deadlock if another CPU attempts + * to call smp_call_function now... + */ + + data.func = kgdb_wait; + data.info = NULL; + atomic_set(&data.started, 0); + data.wait = 0; + + spin_lock(&smp_call_lock); + call_data = &data; + mb(); + + /* Send a message to all other CPUs and wait for them to respond */ + for (i = 0; i < NR_CPUS; i++) + if (cpu_online(i) && i != cpu) + core_send_ipi(i, SMP_CALL_FUNCTION); + + /* Wait for response */ + /* FIXME: lock-up detection, backtrace on lock-up */ + while (atomic_read(&data.started) != cpus) + barrier(); + + call_data = NULL; + spin_unlock(&smp_call_lock); +#endif + + return 0; +} /* * This function does all command processing for interfacing to gdb. It @@ -718,7 +777,7 @@ void handle_exception (struct gdb_regs *regs) /* * force other cpus to enter kgdb */ - smp_call_function(kgdb_wait, NULL, 0, 0); + kgdb_smp_call_kgdb_wait(); /* * If we're in breakpoint() increment the PC diff --git a/arch/mips/kernel/genex.S b/arch/mips/kernel/genex.S index 04418b6568b..ff7af369f28 100644 --- a/arch/mips/kernel/genex.S +++ b/arch/mips/kernel/genex.S @@ -12,6 +12,7 @@ #include #include +#include #include #include #include @@ -171,6 +172,15 @@ NESTED(except_vec_vi, 0, sp) SAVE_AT .set push .set noreorder +#ifdef CONFIG_MIPS_MT_SMTC + /* + * To keep from blindly blocking *all* interrupts + * during service by SMTC kernel, we also want to + * pass the IM value to be cleared. + */ +EXPORT(except_vec_vi_mori) + ori a0, $0, 0 +#endif /* CONFIG_MIPS_MT_SMTC */ EXPORT(except_vec_vi_lui) lui v0, 0 /* Patched */ j except_vec_vi_handler @@ -187,6 +197,25 @@ EXPORT(except_vec_vi_end) NESTED(except_vec_vi_handler, 0, sp) SAVE_TEMP SAVE_STATIC +#ifdef CONFIG_MIPS_MT_SMTC + /* + * SMTC has an interesting problem that interrupts are level-triggered, + * and the CLI macro will clear EXL, potentially causing a duplicate + * interrupt service invocation. So we need to clear the associated + * IM bit of Status prior to doing CLI, and restore it after the + * service routine has been invoked - we must assume that the + * service routine will have cleared the state, and any active + * level represents a new or otherwised unserviced event... + */ + mfc0 t1, CP0_STATUS + and t0, a0, t1 + mfc0 t2, CP0_TCCONTEXT + or t0, t0, t2 + mtc0 t0, CP0_TCCONTEXT + xor t1, t1, t0 + mtc0 t1, CP0_STATUS + ehb +#endif /* CONFIG_MIPS_MT_SMTC */ CLI move a0, sp jalr v0 diff --git a/arch/mips/kernel/head.S b/arch/mips/kernel/head.S index 2e9122a4213..bdf6f6eff72 100644 --- a/arch/mips/kernel/head.S +++ b/arch/mips/kernel/head.S @@ -18,6 +18,7 @@ #include #include +#include #include #include #include @@ -82,12 +83,33 @@ */ .macro setup_c0_status set clr .set push +#ifdef CONFIG_MIPS_MT_SMTC + /* + * For SMTC, we need to set privilege and disable interrupts only for + * the current TC, using the TCStatus register. + */ + mfc0 t0, CP0_TCSTATUS + /* Fortunately CU 0 is in the same place in both registers */ + /* Set TCU0, TMX, TKSU (for later inversion) and IXMT */ + li t1, ST0_CU0 | 0x08001c00 + or t0, t1 + /* Clear TKSU, leave IXMT */ + xori t0, 0x00001800 + mtc0 t0, CP0_TCSTATUS + ehb + /* We need to leave the global IE bit set, but clear EXL...*/ + mfc0 t0, CP0_STATUS + or t0, ST0_CU0 | ST0_EXL | ST0_ERL | \set | \clr + xor t0, ST0_EXL | ST0_ERL | \clr + mtc0 t0, CP0_STATUS +#else mfc0 t0, CP0_STATUS or t0, ST0_CU0|\set|0x1f|\clr xor t0, 0x1f|\clr mtc0 t0, CP0_STATUS .set noreorder sll zero,3 # ehb +#endif .set pop .endm @@ -134,6 +156,24 @@ NESTED(kernel_entry, 16, sp) # kernel entry point ARC64_TWIDDLE_PC +#ifdef CONFIG_MIPS_MT_SMTC + /* + * In SMTC kernel, "CLI" is thread-specific, in TCStatus. + * We still need to enable interrupts globally in Status, + * and clear EXL/ERL. + * + * TCContext is used to track interrupt levels under + * service in SMTC kernel. Clear for boot TC before + * allowing any interrupts. + */ + mtc0 zero, CP0_TCCONTEXT + + mfc0 t0, CP0_STATUS + ori t0, t0, 0xff1f + xori t0, t0, 0x001e + mtc0 t0, CP0_STATUS +#endif /* CONFIG_MIPS_MT_SMTC */ + PTR_LA t0, __bss_start # clear .bss LONG_S zero, (t0) PTR_LA t1, __bss_stop - LONGSIZE @@ -166,8 +206,25 @@ NESTED(kernel_entry, 16, sp) # kernel entry point * function after setting up the stack and gp registers. */ NESTED(smp_bootstrap, 16, sp) +#ifdef CONFIG_MIPS_MT_SMTC + /* + * Read-modify-writes of Status must be atomic, and this + * is one case where CLI is invoked without EXL being + * necessarily set. The CLI and setup_c0_status will + * in fact be redundant for all but the first TC of + * each VPE being booted. + */ + DMT 10 # dmt t2 /* t0, t1 are used by CLI and setup_c0_status() */ + jal mips_ihb +#endif /* CONFIG_MIPS_MT_SMTC */ setup_c0_status_sec smp_slave_setup +#ifdef CONFIG_MIPS_MT_SMTC + andi t2, t2, VPECONTROL_TE + beqz t2, 2f + EMT # emt +2: +#endif /* CONFIG_MIPS_MT_SMTC */ j start_secondary END(smp_bootstrap) #endif /* CONFIG_SMP */ diff --git a/arch/mips/kernel/i8259.c b/arch/mips/kernel/i8259.c index b974ac9057f..2125ba5f1d9 100644 --- a/arch/mips/kernel/i8259.c +++ b/arch/mips/kernel/i8259.c @@ -187,6 +187,10 @@ handle_real_irq: outb(cached_21,0x21); outb(0x60+irq,0x20); /* 'Specific EOI' to master */ } +#ifdef CONFIG_MIPS_MT_SMTC + if (irq_hwmask[irq] & ST0_IM) + set_c0_status(irq_hwmask[irq] & ST0_IM); +#endif /* CONFIG_MIPS_MT_SMTC */ spin_unlock_irqrestore(&i8259A_lock, flags); return; diff --git a/arch/mips/kernel/irq-msc01.c b/arch/mips/kernel/irq-msc01.c index 3f653c7cfbf..97ebdc754b9 100644 --- a/arch/mips/kernel/irq-msc01.c +++ b/arch/mips/kernel/irq-msc01.c @@ -76,6 +76,11 @@ static void level_mask_and_ack_msc_irq(unsigned int irq) mask_msc_irq(irq); if (!cpu_has_veic) MSCIC_WRITE(MSC01_IC_EOI, 0); +#ifdef CONFIG_MIPS_MT_SMTC + /* This actually needs to be a call into platform code */ + if (irq_hwmask[irq] & ST0_IM) + set_c0_status(irq_hwmask[irq] & ST0_IM); +#endif /* CONFIG_MIPS_MT_SMTC */ } /* @@ -92,6 +97,10 @@ static void edge_mask_and_ack_msc_irq(unsigned int irq) MSCIC_WRITE(MSC01_IC_SUP+irq*8, r | ~MSC01_IC_SUP_EDGE_BIT); MSCIC_WRITE(MSC01_IC_SUP+irq*8, r); } +#ifdef CONFIG_MIPS_MT_SMTC + if (irq_hwmask[irq] & ST0_IM) + set_c0_status(irq_hwmask[irq] & ST0_IM); +#endif /* CONFIG_MIPS_MT_SMTC */ } /* diff --git a/arch/mips/kernel/irq.c b/arch/mips/kernel/irq.c index e0efc4f2f93..3dce742e716 100644 --- a/arch/mips/kernel/irq.c +++ b/arch/mips/kernel/irq.c @@ -38,6 +38,15 @@ void ack_bad_irq(unsigned int irq) atomic_t irq_err_count; +#ifdef CONFIG_MIPS_MT_SMTC +/* + * SMTC Kernel needs to manipulate low-level CPU interrupt mask + * in do_IRQ. These are passed in setup_irq_smtc() and stored + * in this table. + */ +unsigned long irq_hwmask[NR_IRQS]; +#endif /* CONFIG_MIPS_MT_SMTC */ + #undef do_IRQ /* @@ -49,6 +58,7 @@ asmlinkage unsigned int do_IRQ(unsigned int irq, struct pt_regs *regs) { irq_enter(); + __DO_IRQ_SMTC_HOOK(); __do_IRQ(irq, regs); irq_exit(); @@ -129,6 +139,9 @@ void __init init_IRQ(void) irq_desc[i].depth = 1; irq_desc[i].handler = &no_irq_type; spin_lock_init(&irq_desc[i].lock); +#ifdef CONFIG_MIPS_MT_SMTC + irq_hwmask[i] = 0; +#endif /* CONFIG_MIPS_MT_SMTC */ } arch_init_irq(); diff --git a/arch/mips/kernel/mips-mt.c b/arch/mips/kernel/mips-mt.c new file mode 100644 index 00000000000..02237a685ec --- /dev/null +++ b/arch/mips/kernel/mips-mt.c @@ -0,0 +1,449 @@ +/* + * General MIPS MT support routines, usable in AP/SP, SMVP, or SMTC kernels + * Copyright (C) 2005 Mips Technologies, Inc + */ + +#include +#include +#include +#include + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +/* + * CPU mask used to set process affinity for MT VPEs/TCs with FPUs + */ + +cpumask_t mt_fpu_cpumask; + +#ifdef CONFIG_MIPS_MT_FPAFF + +#include +#include +#include + +unsigned long mt_fpemul_threshold = 0; + +/* + * Replacement functions for the sys_sched_setaffinity() and + * sys_sched_getaffinity() system calls, so that we can integrate + * FPU affinity with the user's requested processor affinity. + * This code is 98% identical with the sys_sched_setaffinity() + * and sys_sched_getaffinity() system calls, and should be + * updated when kernel/sched.c changes. + */ + +/* + * find_process_by_pid - find a process with a matching PID value. + * used in sys_sched_set/getaffinity() in kernel/sched.c, so + * cloned here. + */ +static inline task_t *find_process_by_pid(pid_t pid) +{ + return pid ? find_task_by_pid(pid) : current; +} + + +/* + * mipsmt_sys_sched_setaffinity - set the cpu affinity of a process + */ +asmlinkage long mipsmt_sys_sched_setaffinity(pid_t pid, unsigned int len, + unsigned long __user *user_mask_ptr) +{ + cpumask_t new_mask; + cpumask_t effective_mask; + int retval; + task_t *p; + + if (len < sizeof(new_mask)) + return -EINVAL; + + if (copy_from_user(&new_mask, user_mask_ptr, sizeof(new_mask))) + return -EFAULT; + + lock_cpu_hotplug(); + read_lock(&tasklist_lock); + + p = find_process_by_pid(pid); + if (!p) { + read_unlock(&tasklist_lock); + unlock_cpu_hotplug(); + return -ESRCH; + } + + /* + * It is not safe to call set_cpus_allowed with the + * tasklist_lock held. We will bump the task_struct's + * usage count and drop tasklist_lock before invoking + * set_cpus_allowed. + */ + get_task_struct(p); + + retval = -EPERM; + if ((current->euid != p->euid) && (current->euid != p->uid) && + !capable(CAP_SYS_NICE)) { + read_unlock(&tasklist_lock); + goto out_unlock; + } + + /* Record new user-specified CPU set for future reference */ + p->thread.user_cpus_allowed = new_mask; + + /* Unlock the task list */ + read_unlock(&tasklist_lock); + + /* Compute new global allowed CPU set if necessary */ + if( (p->thread.mflags & MF_FPUBOUND) + && cpus_intersects(new_mask, mt_fpu_cpumask)) { + cpus_and(effective_mask, new_mask, mt_fpu_cpumask); + retval = set_cpus_allowed(p, effective_mask); + } else { + p->thread.mflags &= ~MF_FPUBOUND; + retval = set_cpus_allowed(p, new_mask); + } + + +out_unlock: + put_task_struct(p); + unlock_cpu_hotplug(); + return retval; +} + +/* + * mipsmt_sys_sched_getaffinity - get the cpu affinity of a process + */ +asmlinkage long mipsmt_sys_sched_getaffinity(pid_t pid, unsigned int len, + unsigned long __user *user_mask_ptr) +{ + unsigned int real_len; + cpumask_t mask; + int retval; + task_t *p; + + real_len = sizeof(mask); + if (len < real_len) + return -EINVAL; + + lock_cpu_hotplug(); + read_lock(&tasklist_lock); + + retval = -ESRCH; + p = find_process_by_pid(pid); + if (!p) + goto out_unlock; + + retval = 0; + + cpus_and(mask, p->thread.user_cpus_allowed, cpu_possible_map); + +out_unlock: + read_unlock(&tasklist_lock); + unlock_cpu_hotplug(); + if (retval) + return retval; + if (copy_to_user(user_mask_ptr, &mask, real_len)) + return -EFAULT; + return real_len; +} + +#endif /* CONFIG_MIPS_MT_FPAFF */ + +/* + * Dump new MIPS MT state for the core. Does not leave TCs halted. + * Takes an argument which taken to be a pre-call MVPControl value. + */ + +void mips_mt_regdump(unsigned long mvpctl) +{ + unsigned long flags; + unsigned long vpflags; + unsigned long mvpconf0; + int nvpe; + int ntc; + int i; + int tc; + unsigned long haltval; + unsigned long tcstatval; +#ifdef CONFIG_MIPS_MT_SMTC + void smtc_soft_dump(void); +#endif /* CONFIG_MIPT_MT_SMTC */ + + local_irq_save(flags); + vpflags = dvpe(); + printk("=== MIPS MT State Dump ===\n"); + printk("-- Global State --\n"); + printk(" MVPControl Passed: %08lx\n", mvpctl); + printk(" MVPControl Read: %08lx\n", vpflags); + printk(" MVPConf0 : %08lx\n", (mvpconf0 = read_c0_mvpconf0())); + nvpe = ((mvpconf0 & MVPCONF0_PVPE) >> MVPCONF0_PVPE_SHIFT) + 1; + ntc = ((mvpconf0 & MVPCONF0_PTC) >> MVPCONF0_PTC_SHIFT) + 1; + printk("-- per-VPE State --\n"); + for(i = 0; i < nvpe; i++) { + for(tc = 0; tc < ntc; tc++) { + settc(tc); + if((read_tc_c0_tcbind() & TCBIND_CURVPE) == i) { + printk(" VPE %d\n", i); + printk(" VPEControl : %08lx\n", read_vpe_c0_vpecontrol()); + printk(" VPEConf0 : %08lx\n", read_vpe_c0_vpeconf0()); + printk(" VPE%d.Status : %08lx\n", + i, read_vpe_c0_status()); + printk(" VPE%d.EPC : %08lx\n", i, read_vpe_c0_epc()); + printk(" VPE%d.Cause : %08lx\n", i, read_vpe_c0_cause()); + printk(" VPE%d.Config7 : %08lx\n", + i, read_vpe_c0_config7()); + break; /* Next VPE */ + } + } + } + printk("-- per-TC State --\n"); + for(tc = 0; tc < ntc; tc++) { + settc(tc); + if(read_tc_c0_tcbind() == read_c0_tcbind()) { + /* Are we dumping ourself? */ + haltval = 0; /* Then we're not halted, and mustn't be */ + tcstatval = flags; /* And pre-dump TCStatus is flags */ + printk(" TC %d (current TC with VPE EPC above)\n", tc); + } else { + haltval = read_tc_c0_tchalt(); + write_tc_c0_tchalt(1); + tcstatval = read_tc_c0_tcstatus(); + printk(" TC %d\n", tc); + } + printk(" TCStatus : %08lx\n", tcstatval); + printk(" TCBind : %08lx\n", read_tc_c0_tcbind()); + printk(" TCRestart : %08lx\n", read_tc_c0_tcrestart()); + printk(" TCHalt : %08lx\n", haltval); + printk(" TCContext : %08lx\n", read_tc_c0_tccontext()); + if (!haltval) + write_tc_c0_tchalt(0); + } +#ifdef CONFIG_MIPS_MT_SMTC + smtc_soft_dump(); +#endif /* CONFIG_MIPT_MT_SMTC */ + printk("===========================\n"); + evpe(vpflags); + local_irq_restore(flags); +} + +static int mt_opt_norps = 0; +static int mt_opt_rpsctl = -1; +static int mt_opt_nblsu = -1; +static int mt_opt_forceconfig7 = 0; +static int mt_opt_config7 = -1; + +static int __init rps_disable(char *s) +{ + mt_opt_norps = 1; + return 1; +} +__setup("norps", rps_disable); + +static int __init rpsctl_set(char *str) +{ + get_option(&str, &mt_opt_rpsctl); + return 1; +} +__setup("rpsctl=", rpsctl_set); + +static int __init nblsu_set(char *str) +{ + get_option(&str, &mt_opt_nblsu); + return 1; +} +__setup("nblsu=", nblsu_set); + +static int __init config7_set(char *str) +{ + get_option(&str, &mt_opt_config7); + mt_opt_forceconfig7 = 1; + return 1; +} +__setup("config7=", config7_set); + +/* Experimental cache flush control parameters that should go away some day */ +int mt_protiflush = 0; +int mt_protdflush = 0; +int mt_n_iflushes = 1; +int mt_n_dflushes = 1; + +static int __init set_protiflush(char *s) +{ + mt_protiflush = 1; + return 1; +} +__setup("protiflush", set_protiflush); + +static int __init set_protdflush(char *s) +{ + mt_protdflush = 1; + return 1; +} +__setup("protdflush", set_protdflush); + +static int __init niflush(char *s) +{ + get_option(&s, &mt_n_iflushes); + return 1; +} +__setup("niflush=", niflush); + +static int __init ndflush(char *s) +{ + get_option(&s, &mt_n_dflushes); + return 1; +} +__setup("ndflush=", ndflush); +#ifdef CONFIG_MIPS_MT_FPAFF +static int fpaff_threshold = -1; + +static int __init fpaff_thresh(char *str) +{ + get_option(&str, &fpaff_threshold); + return 1; +} + +__setup("fpaff=", fpaff_thresh); +#endif /* CONFIG_MIPS_MT_FPAFF */ + +static unsigned int itc_base = 0; + +static int __init set_itc_base(char *str) +{ + get_option(&str, &itc_base); + return 1; +} + +__setup("itcbase=", set_itc_base); + +void mips_mt_set_cpuoptions(void) +{ + unsigned int oconfig7 = read_c0_config7(); + unsigned int nconfig7 = oconfig7; + + if (mt_opt_norps) { + printk("\"norps\" option deprectated: use \"rpsctl=\"\n"); + } + if (mt_opt_rpsctl >= 0) { + printk("34K return prediction stack override set to %d.\n", + mt_opt_rpsctl); + if (mt_opt_rpsctl) + nconfig7 |= (1 << 2); + else + nconfig7 &= ~(1 << 2); + } + if (mt_opt_nblsu >= 0) { + printk("34K ALU/LSU sync override set to %d.\n", mt_opt_nblsu); + if (mt_opt_nblsu) + nconfig7 |= (1 << 5); + else + nconfig7 &= ~(1 << 5); + } + if (mt_opt_forceconfig7) { + printk("CP0.Config7 forced to 0x%08x.\n", mt_opt_config7); + nconfig7 = mt_opt_config7; + } + if (oconfig7 != nconfig7) { + __asm__ __volatile("sync"); + write_c0_config7(nconfig7); + ehb (); + printk("Config7: 0x%08x\n", read_c0_config7()); + } + + /* Report Cache management debug options */ + if (mt_protiflush) + printk("I-cache flushes single-threaded\n"); + if (mt_protdflush) + printk("D-cache flushes single-threaded\n"); + if (mt_n_iflushes != 1) + printk("I-Cache Flushes Repeated %d times\n", mt_n_iflushes); + if (mt_n_dflushes != 1) + printk("D-Cache Flushes Repeated %d times\n", mt_n_dflushes); + +#ifdef CONFIG_MIPS_MT_FPAFF + /* FPU Use Factor empirically derived from experiments on 34K */ +#define FPUSEFACTOR 333 + + if (fpaff_threshold >= 0) { + mt_fpemul_threshold = fpaff_threshold; + } else { + mt_fpemul_threshold = + (FPUSEFACTOR * (loops_per_jiffy/(500000/HZ))) / HZ; + } + printk("FPU Affinity set after %ld emulations\n", + mt_fpemul_threshold); +#endif /* CONFIG_MIPS_MT_FPAFF */ + + if (itc_base != 0) { + /* + * Configure ITC mapping. This code is very + * specific to the 34K core family, which uses + * a special mode bit ("ITC") in the ErrCtl + * register to enable access to ITC control + * registers via cache "tag" operations. + */ + unsigned long ectlval; + unsigned long itcblkgrn; + + /* ErrCtl register is known as "ecc" to Linux */ + ectlval = read_c0_ecc(); + write_c0_ecc(ectlval | (0x1 << 26)); + ehb(); +#define INDEX_0 (0x80000000) +#define INDEX_8 (0x80000008) + /* Read "cache tag" for Dcache pseudo-index 8 */ + cache_op(Index_Load_Tag_D, INDEX_8); + ehb(); + itcblkgrn = read_c0_dtaglo(); + itcblkgrn &= 0xfffe0000; + /* Set for 128 byte pitch of ITC cells */ + itcblkgrn |= 0x00000c00; + /* Stage in Tag register */ + write_c0_dtaglo(itcblkgrn); + ehb(); + /* Write out to ITU with CACHE op */ + cache_op(Index_Store_Tag_D, INDEX_8); + /* Now set base address, and turn ITC on with 0x1 bit */ + write_c0_dtaglo((itc_base & 0xfffffc00) | 0x1 ); + ehb(); + /* Write out to ITU with CACHE op */ + cache_op(Index_Store_Tag_D, INDEX_0); + write_c0_ecc(ectlval); + ehb(); + printk("Mapped %ld ITC cells starting at 0x%08x\n", + ((itcblkgrn & 0x7fe00000) >> 20), itc_base); + } +} + +/* + * Function to protect cache flushes from concurrent execution + * depends on MP software model chosen. + */ + +void mt_cflush_lockdown(void) +{ +#ifdef CONFIG_MIPS_MT_SMTC + void smtc_cflush_lockdown(void); + + smtc_cflush_lockdown(); +#endif /* CONFIG_MIPS_MT_SMTC */ + /* FILL IN VSMP and AP/SP VERSIONS HERE */ +} + +void mt_cflush_release(void) +{ +#ifdef CONFIG_MIPS_MT_SMTC + void smtc_cflush_release(void); + + smtc_cflush_release(); +#endif /* CONFIG_MIPS_MT_SMTC */ + /* FILL IN VSMP and AP/SP VERSIONS HERE */ +} diff --git a/arch/mips/kernel/process.c b/arch/mips/kernel/process.c index c66db5e5ab6..8b393df460a 100644 --- a/arch/mips/kernel/process.c +++ b/arch/mips/kernel/process.c @@ -41,6 +41,10 @@ #include #include #include +#ifdef CONFIG_MIPS_MT_SMTC +#include +extern void smtc_idle_loop_hook(void); +#endif /* CONFIG_MIPS_MT_SMTC */ /* * The idle thread. There's no useful work to be done, so just try to conserve @@ -51,9 +55,13 @@ ATTRIB_NORET void cpu_idle(void) { /* endless idle loop with no priority at all */ while (1) { - while (!need_resched()) + while (!need_resched()) { +#ifdef CONFIG_MIPS_MT_SMTC + smtc_idle_loop_hook(); +#endif /* CONFIG_MIPS_MT_SMTC */ if (cpu_wait) (*cpu_wait)(); + } preempt_enable_no_resched(); schedule(); preempt_disable(); diff --git a/arch/mips/kernel/ptrace.c b/arch/mips/kernel/ptrace.c index f838b36cc76..f3106d0771b 100644 --- a/arch/mips/kernel/ptrace.c +++ b/arch/mips/kernel/ptrace.c @@ -248,10 +248,20 @@ long arch_ptrace(struct task_struct *child, long request, long addr, long data) break; case FPC_EIR: { /* implementation / version register */ unsigned int flags; +#ifdef CONFIG_MIPS_MT_SMTC + unsigned int irqflags; + unsigned int mtflags; +#endif /* CONFIG_MIPS_MT_SMTC */ if (!cpu_has_fpu) break; +#ifdef CONFIG_MIPS_MT_SMTC + /* Read-modify-write of Status must be atomic */ + local_irq_save(irqflags); + mtflags = dmt(); +#endif /* CONFIG_MIPS_MT_SMTC */ + preempt_disable(); if (cpu_has_mipsmt) { unsigned int vpflags = dvpe(); @@ -266,6 +276,10 @@ long arch_ptrace(struct task_struct *child, long request, long addr, long data) __asm__ __volatile__("cfc1\t%0,$0": "=r" (tmp)); write_c0_status(flags); } +#ifdef CONFIG_MIPS_MT_SMTC + emt(mtflags); + local_irq_restore(irqflags); +#endif /* CONFIG_MIPS_MT_SMTC */ preempt_enable(); break; } diff --git a/arch/mips/kernel/ptrace32.c b/arch/mips/kernel/ptrace32.c index 0d5cf97af72..8704dc0496e 100644 --- a/arch/mips/kernel/ptrace32.c +++ b/arch/mips/kernel/ptrace32.c @@ -173,12 +173,22 @@ asmlinkage int sys32_ptrace(int request, int pid, int addr, int data) break; case FPC_EIR: { /* implementation / version register */ unsigned int flags; +#ifdef CONFIG_MIPS_MT_SMTC + unsigned int irqflags; + unsigned int mtflags; +#endif /* CONFIG_MIPS_MT_SMTC */ if (!cpu_has_fpu) { tmp = 0; break; } +#ifdef CONFIG_MIPS_MT_SMTC + /* Read-modify-write of Status must be atomic */ + local_irq_save(irqflags); + mtflags = dmt(); +#endif /* CONFIG_MIPS_MT_SMTC */ + preempt_disable(); if (cpu_has_mipsmt) { unsigned int vpflags = dvpe(); @@ -193,6 +203,10 @@ asmlinkage int sys32_ptrace(int request, int pid, int addr, int data) __asm__ __volatile__("cfc1\t%0,$0": "=r" (tmp)); write_c0_status(flags); } +#ifdef CONFIG_MIPS_MT_SMTC + emt(mtflags); + local_irq_restore(irqflags); +#endif /* CONFIG_MIPS_MT_SMTC */ preempt_enable(); break; } diff --git a/arch/mips/kernel/r4k_switch.S b/arch/mips/kernel/r4k_switch.S index d2afbd19a9c..0b1b54acee9 100644 --- a/arch/mips/kernel/r4k_switch.S +++ b/arch/mips/kernel/r4k_switch.S @@ -88,7 +88,18 @@ PTR_ADDIU t0, $28, _THREAD_SIZE - 32 set_saved_sp t0, t1, t2 - +#ifdef CONFIG_MIPS_MT_SMTC + /* Read-modify-writes of Status must be atomic on a VPE */ + mfc0 t2, CP0_TCSTATUS + ori t1, t2, TCSTATUS_IXMT + mtc0 t1, CP0_TCSTATUS + andi t2, t2, TCSTATUS_IXMT + ehb + DMT 8 # dmt t0 + move t1,ra + jal mips_ihb + move ra,t1 +#endif /* CONFIG_MIPS_MT_SMTC */ mfc0 t1, CP0_STATUS /* Do we really need this? */ li a3, 0xff01 and t1, a3 @@ -97,6 +108,18 @@ and a2, a3 or a2, t1 mtc0 a2, CP0_STATUS +#ifdef CONFIG_MIPS_MT_SMTC + ehb + andi t0, t0, VPECONTROL_TE + beqz t0, 1f + emt +1: + mfc0 t1, CP0_TCSTATUS + xori t1, t1, TCSTATUS_IXMT + or t1, t1, t2 + mtc0 t1, CP0_TCSTATUS + ehb +#endif /* CONFIG_MIPS_MT_SMTC */ move v0, a0 jr ra END(resume) @@ -131,10 +154,19 @@ LEAF(_restore_fp) #define FPU_DEFAULT 0x00000000 LEAF(_init_fpu) +#ifdef CONFIG_MIPS_MT_SMTC + /* Rather than manipulate per-VPE Status, set per-TC bit in TCStatus */ + mfc0 t0, CP0_TCSTATUS + /* Bit position is the same for Status, TCStatus */ + li t1, ST0_CU1 + or t0, t1 + mtc0 t0, CP0_TCSTATUS +#else /* Normal MIPS CU1 enable */ mfc0 t0, CP0_STATUS li t1, ST0_CU1 or t0, t1 mtc0 t0, CP0_STATUS +#endif /* CONFIG_MIPS_MT_SMTC */ fpu_enable_hazard li t1, FPU_DEFAULT diff --git a/arch/mips/kernel/smp-mt.c b/arch/mips/kernel/smp-mt.c new file mode 100644 index 00000000000..19b8e4b31b7 --- /dev/null +++ b/arch/mips/kernel/smp-mt.c @@ -0,0 +1,349 @@ +/* + * This program is free software; you can distribute it and/or modify it + * under the terms of the GNU General Public License (Version 2) as + * published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License + * for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. + * + * Copyright (C) 2004, 05, 06 MIPS Technologies, Inc. + * Elizabeth Clarke (beth@mips.com) + * Ralf Baechle (ralf@linux-mips.org) + * Copyright (C) 2006 Ralf Baechle (ralf@linux-mips.org) + */ +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include /* This is f*cking wrong */ + +#define MIPS_CPU_IPI_RESCHED_IRQ 0 +#define MIPS_CPU_IPI_CALL_IRQ 1 + +static int cpu_ipi_resched_irq, cpu_ipi_call_irq; + +#if 0 +static void dump_mtregisters(int vpe, int tc) +{ + printk("vpe %d tc %d\n", vpe, tc); + + settc(tc); + + printk(" c0 status 0x%lx\n", read_vpe_c0_status()); + printk(" vpecontrol 0x%lx\n", read_vpe_c0_vpecontrol()); + printk(" vpeconf0 0x%lx\n", read_vpe_c0_vpeconf0()); + printk(" tcstatus 0x%lx\n", read_tc_c0_tcstatus()); + printk(" tcrestart 0x%lx\n", read_tc_c0_tcrestart()); + printk(" tcbind 0x%lx\n", read_tc_c0_tcbind()); + printk(" tchalt 0x%lx\n", read_tc_c0_tchalt()); +} +#endif + +void __init sanitize_tlb_entries(void) +{ + int i, tlbsiz; + unsigned long mvpconf0, ncpu; + + if (!cpu_has_mipsmt) + return; + + /* Enable VPC */ + set_c0_mvpcontrol(MVPCONTROL_VPC); + + back_to_back_c0_hazard(); + + /* Disable TLB sharing */ + clear_c0_mvpcontrol(MVPCONTROL_STLB); + + mvpconf0 = read_c0_mvpconf0(); + + printk(KERN_INFO "MVPConf0 0x%lx TLBS %lx PTLBE %ld\n", mvpconf0, + (mvpconf0 & MVPCONF0_TLBS) >> MVPCONF0_TLBS_SHIFT, + (mvpconf0 & MVPCONF0_PTLBE) >> MVPCONF0_PTLBE_SHIFT); + + tlbsiz = (mvpconf0 & MVPCONF0_PTLBE) >> MVPCONF0_PTLBE_SHIFT; + ncpu = ((mvpconf0 & MVPCONF0_PVPE) >> MVPCONF0_PVPE_SHIFT) + 1; + + printk(" tlbsiz %d ncpu %ld\n", tlbsiz, ncpu); + + if (tlbsiz > 0) { + /* share them out across the vpe's */ + tlbsiz /= ncpu; + + printk(KERN_INFO "setting Config1.MMU_size to %d\n", tlbsiz); + + for (i = 0; i < ncpu; i++) { + settc(i); + + if (i == 0) + write_c0_config1((read_c0_config1() & ~(0x3f << 25)) | (tlbsiz << 25)); + else + write_vpe_c0_config1((read_vpe_c0_config1() & ~(0x3f << 25)) | + (tlbsiz << 25)); + } + } + + clear_c0_mvpcontrol(MVPCONTROL_VPC); +} + +static void ipi_resched_dispatch (struct pt_regs *regs) +{ + do_IRQ(MIPSCPU_INT_BASE + MIPS_CPU_IPI_RESCHED_IRQ, regs); +} + +static void ipi_call_dispatch (struct pt_regs *regs) +{ + do_IRQ(MIPSCPU_INT_BASE + MIPS_CPU_IPI_CALL_IRQ, regs); +} + +irqreturn_t ipi_resched_interrupt(int irq, void *dev_id, struct pt_regs *regs) +{ + return IRQ_HANDLED; +} + +irqreturn_t ipi_call_interrupt(int irq, void *dev_id, struct pt_regs *regs) +{ + smp_call_function_interrupt(); + + return IRQ_HANDLED; +} + +static struct irqaction irq_resched = { + .handler = ipi_resched_interrupt, + .flags = SA_INTERRUPT, + .name = "IPI_resched" +}; + +static struct irqaction irq_call = { + .handler = ipi_call_interrupt, + .flags = SA_INTERRUPT, + .name = "IPI_call" +}; + +/* + * Common setup before any secondaries are started + * Make sure all CPU's are in a sensible state before we boot any of the + * secondarys + */ +void plat_smp_setup(void) +{ + unsigned long val; + int i, num; + + if (!cpu_has_mipsmt) + return; + + /* disable MT so we can configure */ + dvpe(); + dmt(); + + mips_mt_set_cpuoptions(); + + /* Put MVPE's into 'configuration state' */ + set_c0_mvpcontrol(MVPCONTROL_VPC); + + val = read_c0_mvpconf0(); + + /* we'll always have more TC's than VPE's, so loop setting everything + to a sensible state */ + for (i = 0, num = 0; i <= ((val & MVPCONF0_PTC) >> MVPCONF0_PTC_SHIFT); i++) { + settc(i); + + /* VPE's */ + if (i <= ((val & MVPCONF0_PVPE) >> MVPCONF0_PVPE_SHIFT)) { + + /* deactivate all but vpe0 */ + if (i != 0) { + unsigned long tmp = read_vpe_c0_vpeconf0(); + + tmp &= ~VPECONF0_VPA; + + /* master VPE */ + tmp |= VPECONF0_MVP; + write_vpe_c0_vpeconf0(tmp); + + /* Record this as available CPU */ + cpu_set(i, phys_cpu_present_map); + __cpu_number_map[i] = ++num; + __cpu_logical_map[num] = i; + } + + /* disable multi-threading with TC's */ + write_vpe_c0_vpecontrol(read_vpe_c0_vpecontrol() & ~VPECONTROL_TE); + + if (i != 0) { + write_vpe_c0_status((read_c0_status() & ~(ST0_IM | ST0_IE | ST0_KSU)) | ST0_CU0); + + /* set config to be the same as vpe0, particularly kseg0 coherency alg */ + write_vpe_c0_config( read_c0_config()); + + /* make sure there are no software interrupts pending */ + write_vpe_c0_cause(read_vpe_c0_cause() & ~(C_SW1|C_SW0)); + + /* Propagate Config7 */ + write_vpe_c0_config7(read_c0_config7()); + } + + } + + /* TC's */ + + if (i != 0) { + unsigned long tmp; + + /* bind a TC to each VPE, May as well put all excess TC's + on the last VPE */ + if ( i >= (((val & MVPCONF0_PVPE) >> MVPCONF0_PVPE_SHIFT)+1) ) + write_tc_c0_tcbind(read_tc_c0_tcbind() | ((val & MVPCONF0_PVPE) >> MVPCONF0_PVPE_SHIFT) ); + else { + write_tc_c0_tcbind( read_tc_c0_tcbind() | i); + + /* and set XTC */ + write_vpe_c0_vpeconf0( read_vpe_c0_vpeconf0() | (i << VPECONF0_XTC_SHIFT)); + } + + tmp = read_tc_c0_tcstatus(); + + /* mark not allocated and not dynamically allocatable */ + tmp &= ~(TCSTATUS_A | TCSTATUS_DA); + tmp |= TCSTATUS_IXMT; /* interrupt exempt */ + write_tc_c0_tcstatus(tmp); + + write_tc_c0_tchalt(TCHALT_H); + } + } + + /* Release config state */ + clear_c0_mvpcontrol(MVPCONTROL_VPC); + + /* We'll wait until starting the secondaries before starting MVPE */ + + printk(KERN_INFO "Detected %i available secondary CPU(s)\n", num); +} + +void __init plat_prepare_cpus(unsigned int max_cpus) +{ + /* set up ipi interrupts */ + if (cpu_has_vint) { + set_vi_handler (MIPS_CPU_IPI_RESCHED_IRQ, ipi_resched_dispatch); + set_vi_handler (MIPS_CPU_IPI_CALL_IRQ, ipi_call_dispatch); + } + + cpu_ipi_resched_irq = MIPSCPU_INT_BASE + MIPS_CPU_IPI_RESCHED_IRQ; + cpu_ipi_call_irq = MIPSCPU_INT_BASE + MIPS_CPU_IPI_CALL_IRQ; + + setup_irq(cpu_ipi_resched_irq, &irq_resched); + setup_irq(cpu_ipi_call_irq, &irq_call); + + /* need to mark IPI's as IRQ_PER_CPU */ + irq_desc[cpu_ipi_resched_irq].status |= IRQ_PER_CPU; + irq_desc[cpu_ipi_call_irq].status |= IRQ_PER_CPU; +} + +/* + * Setup the PC, SP, and GP of a secondary processor and start it + * running! + * smp_bootstrap is the place to resume from + * __KSTK_TOS(idle) is apparently the stack pointer + * (unsigned long)idle->thread_info the gp + * assumes a 1:1 mapping of TC => VPE + */ +void prom_boot_secondary(int cpu, struct task_struct *idle) +{ + struct thread_info *gp = task_thread_info(idle); + dvpe(); + set_c0_mvpcontrol(MVPCONTROL_VPC); + + settc(cpu); + + /* restart */ + write_tc_c0_tcrestart((unsigned long)&smp_bootstrap); + + /* enable the tc this vpe/cpu will be running */ + write_tc_c0_tcstatus((read_tc_c0_tcstatus() & ~TCSTATUS_IXMT) | TCSTATUS_A); + + write_tc_c0_tchalt(0); + + /* enable the VPE */ + write_vpe_c0_vpeconf0(read_vpe_c0_vpeconf0() | VPECONF0_VPA); + + /* stack pointer */ + write_tc_gpr_sp( __KSTK_TOS(idle)); + + /* global pointer */ + write_tc_gpr_gp((unsigned long)gp); + + flush_icache_range((unsigned long)gp, + (unsigned long)(gp + sizeof(struct thread_info))); + + /* finally out of configuration and into chaos */ + clear_c0_mvpcontrol(MVPCONTROL_VPC); + + evpe(EVPE_ENABLE); +} + +void prom_init_secondary(void) +{ + write_c0_status((read_c0_status() & ~ST0_IM ) | + (STATUSF_IP0 | STATUSF_IP1 | STATUSF_IP7)); +} + +void prom_smp_finish(void) +{ + write_c0_compare(read_c0_count() + (8* mips_hpt_frequency/HZ)); + + local_irq_enable(); +} + +void prom_cpus_done(void) +{ +} + +void core_send_ipi(int cpu, unsigned int action) +{ + int i; + unsigned long flags; + int vpflags; + + local_irq_save (flags); + + vpflags = dvpe(); /* cant access the other CPU's registers whilst MVPE enabled */ + + switch (action) { + case SMP_CALL_FUNCTION: + i = C_SW1; + break; + + case SMP_RESCHEDULE_YOURSELF: + default: + i = C_SW0; + break; + } + + /* 1:1 mapping of vpe and tc... */ + settc(cpu); + write_vpe_c0_cause(read_vpe_c0_cause() | i); + evpe(vpflags); + + local_irq_restore(flags); +} diff --git a/arch/mips/kernel/smp.c b/arch/mips/kernel/smp.c index 72a287aa937..d42f358754a 100644 --- a/arch/mips/kernel/smp.c +++ b/arch/mips/kernel/smp.c @@ -38,6 +38,10 @@ #include #include +#ifdef CONFIG_MIPS_MT_SMTC +#include +#endif /* CONFIG_MIPS_MT_SMTC */ + cpumask_t phys_cpu_present_map; /* Bitmask of available CPUs */ volatile cpumask_t cpu_callin_map; /* Bitmask of started secondaries */ cpumask_t cpu_online_map; /* Bitmask of currently online CPUs */ @@ -85,6 +89,10 @@ asmlinkage void start_secondary(void) { unsigned int cpu; +#ifdef CONFIG_MIPS_MT_SMTC + /* Only do cpu_probe for first TC of CPU */ + if ((read_c0_tcbind() & TCBIND_CURTC) == 0) +#endif /* CONFIG_MIPS_MT_SMTC */ cpu_probe(); cpu_report(); per_cpu_trap_init(); @@ -179,11 +187,13 @@ int smp_call_function (void (*func) (void *info), void *info, int retry, if (wait) while (atomic_read(&data.finished) != cpus) barrier(); + call_data = NULL; spin_unlock(&smp_call_lock); return 0; } + void smp_call_function_interrupt(void) { void (*func) (void *info) = call_data->func; diff --git a/arch/mips/kernel/smp_mt.c b/arch/mips/kernel/smp_mt.c deleted file mode 100644 index 993b8bf56aa..00000000000 --- a/arch/mips/kernel/smp_mt.c +++ /dev/null @@ -1,342 +0,0 @@ -/* - * Copyright (C) 2004, 2005 MIPS Technologies, Inc. All rights reserved. - * - * Elizabeth Clarke (beth@mips.com) - * - * This program is free software; you can distribute it and/or modify it - * under the terms of the GNU General Public License (Version 2) as - * published by the Free Software Foundation. - * - * This program is distributed in the hope it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License - * for more details. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. - * - */ -#include -#include -#include -#include -#include - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#define MIPS_CPU_IPI_RESCHED_IRQ 0 -#define MIPS_CPU_IPI_CALL_IRQ 1 - -static int cpu_ipi_resched_irq, cpu_ipi_call_irq; - -#if 0 -static void dump_mtregisters(int vpe, int tc) -{ - printk("vpe %d tc %d\n", vpe, tc); - - settc(tc); - - printk(" c0 status 0x%lx\n", read_vpe_c0_status()); - printk(" vpecontrol 0x%lx\n", read_vpe_c0_vpecontrol()); - printk(" vpeconf0 0x%lx\n", read_vpe_c0_vpeconf0()); - printk(" tcstatus 0x%lx\n", read_tc_c0_tcstatus()); - printk(" tcrestart 0x%lx\n", read_tc_c0_tcrestart()); - printk(" tcbind 0x%lx\n", read_tc_c0_tcbind()); - printk(" tchalt 0x%lx\n", read_tc_c0_tchalt()); -} -#endif - -void __init sanitize_tlb_entries(void) -{ - int i, tlbsiz; - unsigned long mvpconf0, ncpu; - - if (!cpu_has_mipsmt) - return; - - set_c0_mvpcontrol(MVPCONTROL_VPC); - - back_to_back_c0_hazard(); - - /* Disable TLB sharing */ - clear_c0_mvpcontrol(MVPCONTROL_STLB); - - mvpconf0 = read_c0_mvpconf0(); - - printk(KERN_INFO "MVPConf0 0x%lx TLBS %lx PTLBE %ld\n", mvpconf0, - (mvpconf0 & MVPCONF0_TLBS) >> MVPCONF0_TLBS_SHIFT, - (mvpconf0 & MVPCONF0_PTLBE) >> MVPCONF0_PTLBE_SHIFT); - - tlbsiz = (mvpconf0 & MVPCONF0_PTLBE) >> MVPCONF0_PTLBE_SHIFT; - ncpu = ((mvpconf0 & MVPCONF0_PVPE) >> MVPCONF0_PVPE_SHIFT) + 1; - - printk(" tlbsiz %d ncpu %ld\n", tlbsiz, ncpu); - - if (tlbsiz > 0) { - /* share them out across the vpe's */ - tlbsiz /= ncpu; - - printk(KERN_INFO "setting Config1.MMU_size to %d\n", tlbsiz); - - for (i = 0; i < ncpu; i++) { - settc(i); - - if (i == 0) - write_c0_config1((read_c0_config1() & ~(0x3f << 25)) | (tlbsiz << 25)); - else - write_vpe_c0_config1((read_vpe_c0_config1() & ~(0x3f << 25)) | - (tlbsiz << 25)); - } - } - - clear_c0_mvpcontrol(MVPCONTROL_VPC); -} - -static void ipi_resched_dispatch (struct pt_regs *regs) -{ - do_IRQ(MIPS_CPU_IPI_RESCHED_IRQ, regs); -} - -static void ipi_call_dispatch (struct pt_regs *regs) -{ - do_IRQ(MIPS_CPU_IPI_CALL_IRQ, regs); -} - -irqreturn_t ipi_resched_interrupt(int irq, void *dev_id, struct pt_regs *regs) -{ - return IRQ_HANDLED; -} - -irqreturn_t ipi_call_interrupt(int irq, void *dev_id, struct pt_regs *regs) -{ - smp_call_function_interrupt(); - - return IRQ_HANDLED; -} - -static struct irqaction irq_resched = { - .handler = ipi_resched_interrupt, - .flags = SA_INTERRUPT, - .name = "IPI_resched" -}; - -static struct irqaction irq_call = { - .handler = ipi_call_interrupt, - .flags = SA_INTERRUPT, - .name = "IPI_call" -}; - -/* - * Common setup before any secondaries are started - * Make sure all CPU's are in a sensible state before we boot any of the - * secondarys - */ -void plat_smp_setup(void) -{ - unsigned long val; - int i, num; - - if (!cpu_has_mipsmt) - return; - - /* disable MT so we can configure */ - dvpe(); - dmt(); - - /* Put MVPE's into 'configuration state' */ - set_c0_mvpcontrol(MVPCONTROL_VPC); - - val = read_c0_mvpconf0(); - - /* we'll always have more TC's than VPE's, so loop setting everything - to a sensible state */ - for (i = 0, num = 0; i <= ((val & MVPCONF0_PTC) >> MVPCONF0_PTC_SHIFT); i++) { - settc(i); - - /* VPE's */ - if (i <= ((val & MVPCONF0_PVPE) >> MVPCONF0_PVPE_SHIFT)) { - - /* deactivate all but vpe0 */ - if (i != 0) { - unsigned long tmp = read_vpe_c0_vpeconf0(); - - tmp &= ~VPECONF0_VPA; - - /* master VPE */ - tmp |= VPECONF0_MVP; - write_vpe_c0_vpeconf0(tmp); - - /* Record this as available CPU */ - cpu_set(i, phys_cpu_present_map); - __cpu_number_map[i] = ++num; - __cpu_logical_map[num] = i; - } - - /* disable multi-threading with TC's */ - write_vpe_c0_vpecontrol(read_vpe_c0_vpecontrol() & ~VPECONTROL_TE); - - if (i != 0) { - write_vpe_c0_status((read_c0_status() & ~(ST0_IM | ST0_IE | ST0_KSU)) | ST0_CU0); - write_vpe_c0_cause(read_vpe_c0_cause() & ~CAUSEF_IP); - - /* set config to be the same as vpe0, particularly kseg0 coherency alg */ - write_vpe_c0_config( read_c0_config()); - - /* Propagate Config7 */ - write_vpe_c0_config7(read_c0_config7()); - } - - } - - /* TC's */ - - if (i != 0) { - unsigned long tmp; - - /* bind a TC to each VPE, May as well put all excess TC's - on the last VPE */ - if ( i >= (((val & MVPCONF0_PVPE) >> MVPCONF0_PVPE_SHIFT)+1) ) - write_tc_c0_tcbind(read_tc_c0_tcbind() | ((val & MVPCONF0_PVPE) >> MVPCONF0_PVPE_SHIFT) ); - else { - write_tc_c0_tcbind( read_tc_c0_tcbind() | i); - - /* and set XTC */ - write_vpe_c0_vpeconf0( read_vpe_c0_vpeconf0() | (i << VPECONF0_XTC_SHIFT)); - } - - tmp = read_tc_c0_tcstatus(); - - /* mark not allocated and not dynamically allocatable */ - tmp &= ~(TCSTATUS_A | TCSTATUS_DA); - tmp |= TCSTATUS_IXMT; /* interrupt exempt */ - write_tc_c0_tcstatus(tmp); - - write_tc_c0_tchalt(TCHALT_H); - } - } - - /* Release config state */ - clear_c0_mvpcontrol(MVPCONTROL_VPC); - - /* We'll wait until starting the secondaries before starting MVPE */ - - printk(KERN_INFO "Detected %i available secondary CPU(s)\n", num); - - /* set up ipi interrupts */ - if (cpu_has_vint) { - set_vi_handler (MIPS_CPU_IPI_RESCHED_IRQ, ipi_resched_dispatch); - set_vi_handler (MIPS_CPU_IPI_CALL_IRQ, ipi_call_dispatch); - } -} - -void __init plat_prepare_cpus(unsigned int max_cpus) -{ - cpu_ipi_resched_irq = MIPSCPU_INT_BASE + MIPS_CPU_IPI_RESCHED_IRQ; - cpu_ipi_call_irq = MIPSCPU_INT_BASE + MIPS_CPU_IPI_CALL_IRQ; - - setup_irq(cpu_ipi_resched_irq, &irq_resched); - setup_irq(cpu_ipi_call_irq, &irq_call); - - /* need to mark IPI's as IRQ_PER_CPU */ - irq_desc[cpu_ipi_resched_irq].status |= IRQ_PER_CPU; - irq_desc[cpu_ipi_call_irq].status |= IRQ_PER_CPU; -} - -/* - * Setup the PC, SP, and GP of a secondary processor and start it - * running! - * smp_bootstrap is the place to resume from - * __KSTK_TOS(idle) is apparently the stack pointer - * (unsigned long)idle->thread_info the gp - * assumes a 1:1 mapping of TC => VPE - */ -void prom_boot_secondary(int cpu, struct task_struct *idle) -{ - struct thread_info *gp = task_thread_info(idle); - dvpe(); - set_c0_mvpcontrol(MVPCONTROL_VPC); - - settc(cpu); - - /* restart */ - write_tc_c0_tcrestart((unsigned long)&smp_bootstrap); - - /* enable the tc this vpe/cpu will be running */ - write_tc_c0_tcstatus((read_tc_c0_tcstatus() & ~TCSTATUS_IXMT) | TCSTATUS_A); - - write_tc_c0_tchalt(0); - - /* enable the VPE */ - write_vpe_c0_vpeconf0(read_vpe_c0_vpeconf0() | VPECONF0_VPA); - - /* stack pointer */ - write_tc_gpr_sp( __KSTK_TOS(idle)); - - /* global pointer */ - write_tc_gpr_gp((unsigned long)gp); - - flush_icache_range((unsigned long)gp, (unsigned long)(gp + 1)); - - /* finally out of configuration and into chaos */ - clear_c0_mvpcontrol(MVPCONTROL_VPC); - - evpe(EVPE_ENABLE); -} - -void prom_init_secondary(void) -{ - write_c0_status((read_c0_status() & ~ST0_IM ) | - (STATUSF_IP0 | STATUSF_IP1 | STATUSF_IP7)); -} - -void prom_smp_finish(void) -{ - write_c0_compare(read_c0_count() + (8* mips_hpt_frequency/HZ)); - - local_irq_enable(); -} - -void prom_cpus_done(void) -{ -} - -void core_send_ipi(int cpu, unsigned int action) -{ - int i; - unsigned long flags; - int vpflags; - - local_irq_save (flags); - - vpflags = dvpe(); /* cant access the other CPU's registers whilst MVPE enabled */ - - switch (action) { - case SMP_CALL_FUNCTION: - i = C_SW1; - break; - - case SMP_RESCHEDULE_YOURSELF: - default: - i = C_SW0; - break; - } - - /* 1:1 mapping of vpe and tc... */ - settc(cpu); - write_vpe_c0_cause(read_vpe_c0_cause() | i); - evpe(vpflags); - - local_irq_restore(flags); -} diff --git a/arch/mips/kernel/smtc-asm.S b/arch/mips/kernel/smtc-asm.S new file mode 100644 index 00000000000..c9d65196d91 --- /dev/null +++ b/arch/mips/kernel/smtc-asm.S @@ -0,0 +1,130 @@ +/* + * Assembly Language Functions for MIPS MT SMTC support + */ + +/* + * This file should be built into the kernel only if CONFIG_MIPS_MT_SMTC is set. */ + +#include +#include +#include +#include + +/* + * "Software Interrupt" linkage. + * + * This is invoked when an "Interrupt" is sent from one TC to another, + * where the TC to be interrupted is halted, has it's Restart address + * and Status values saved by the "remote control" thread, then modified + * to cause execution to begin here, in kenel mode. This code then + * disguises the TC state as that of an exception and transfers + * control to the general exception or vectored interrupt handler. + */ + .set noreorder + +/* +The __smtc_ipi_vector would use k0 and k1 as temporaries and +1) Set EXL (this is per-VPE, so this can't be done by proxy!) +2) Restore the K/CU and IXMT bits to the pre "exception" state + (EXL means no interrupts and access to the kernel map). +3) Set EPC to be the saved value of TCRestart. +4) Jump to the exception handler entry point passed by the sender. + +CAN WE PROVE THAT WE WON'T DO THIS IF INTS DISABLED?? +*/ + +/* + * Reviled and slandered vision: Set EXL and restore K/CU/IXMT + * state of pre-halt thread, then save everything and call + * thought some function pointer to imaginary_exception, which + * will parse a register value or memory message queue to + * deliver things like interprocessor interrupts. On return + * from that function, jump to the global ret_from_irq code + * to invoke the scheduler and return as appropriate. + */ + +#define PT_PADSLOT4 (PT_R0-8) +#define PT_PADSLOT5 (PT_R0-4) + + .text + .align 5 +FEXPORT(__smtc_ipi_vector) + .set noat + /* Disable thread scheduling to make Status update atomic */ + DMT 27 # dmt k1 + ehb + /* Set EXL */ + mfc0 k0,CP0_STATUS + ori k0,k0,ST0_EXL + mtc0 k0,CP0_STATUS + ehb + /* Thread scheduling now inhibited by EXL. Restore TE state. */ + andi k1,k1,VPECONTROL_TE + beqz k1,1f + emt +1: + /* + * The IPI sender has put some information on the anticipated + * kernel stack frame. If we were in user mode, this will be + * built above the saved kernel SP. If we were already in the + * kernel, it will be built above the current CPU SP. + * + * Were we in kernel mode, as indicated by CU0? + */ + sll k1,k0,3 + .set noreorder + bltz k1,2f + move k1,sp + .set reorder + /* + * If previously in user mode, set CU0 and use kernel stack. + */ + li k1,ST0_CU0 + or k1,k1,k0 + mtc0 k1,CP0_STATUS + ehb + get_saved_sp + /* Interrupting TC will have pre-set values in slots in the new frame */ +2: subu k1,k1,PT_SIZE + /* Load TCStatus Value */ + lw k0,PT_TCSTATUS(k1) + /* Write it to TCStatus to restore CU/KSU/IXMT state */ + mtc0 k0,$2,1 + ehb + lw k0,PT_EPC(k1) + mtc0 k0,CP0_EPC + /* Save all will redundantly recompute the SP, but use it for now */ + SAVE_ALL + CLI + move a0,sp + /* Function to be invoked passed stack pad slot 5 */ + lw t0,PT_PADSLOT5(sp) + /* Argument from sender passed in stack pad slot 4 */ + lw a1,PT_PADSLOT4(sp) + jalr t0 + nop + j ret_from_irq + nop + +/* + * Called from idle loop to provoke processing of queued IPIs + * First IPI message in queue passed as argument. + */ + +LEAF(self_ipi) + /* Before anything else, block interrupts */ + mfc0 t0,CP0_TCSTATUS + ori t1,t0,TCSTATUS_IXMT + mtc0 t1,CP0_TCSTATUS + ehb + /* We know we're in kernel mode, so prepare stack frame */ + subu t1,sp,PT_SIZE + sw ra,PT_EPC(t1) + sw a0,PT_PADSLOT4(t1) + la t2,ipi_decode + sw t2,PT_PADSLOT5(t1) + /* Save pre-disable value of TCStatus */ + sw t0,PT_TCSTATUS(t1) + j __smtc_ipi_vector + nop +END(self_ipi) diff --git a/arch/mips/kernel/smtc-proc.c b/arch/mips/kernel/smtc-proc.c new file mode 100644 index 00000000000..6f370999617 --- /dev/null +++ b/arch/mips/kernel/smtc-proc.c @@ -0,0 +1,93 @@ +/* + * /proc hooks for SMTC kernel + * Copyright (C) 2005 Mips Technologies, Inc + */ + +#include +#include +#include +#include + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include + +/* + * /proc diagnostic and statistics hooks + */ + +/* + * Statistics gathered + */ +unsigned long selfipis[NR_CPUS]; + +struct smtc_cpu_proc smtc_cpu_stats[NR_CPUS]; + +static struct proc_dir_entry *smtc_stats; + +atomic_t smtc_fpu_recoveries; + +static int proc_read_smtc(char *page, char **start, off_t off, + int count, int *eof, void *data) +{ + int totalen = 0; + int len; + int i; + extern unsigned long ebase; + + len = sprintf(page, "SMTC Status Word: 0x%08x\n", smtc_status); + totalen += len; + page += len; + len = sprintf(page, "Config7: 0x%08x\n", read_c0_config7()); + totalen += len; + page += len; + len = sprintf(page, "EBASE: 0x%08lx\n", ebase); + totalen += len; + page += len; + len = sprintf(page, "Counter Interrupts taken per CPU (TC)\n"); + totalen += len; + page += len; + for (i=0; i < NR_CPUS; i++) { + len = sprintf(page, "%d: %ld\n", i, smtc_cpu_stats[i].timerints); + totalen += len; + page += len; + } + len = sprintf(page, "Self-IPIs by CPU:\n"); + totalen += len; + page += len; + for(i = 0; i < NR_CPUS; i++) { + len = sprintf(page, "%d: %ld\n", i, smtc_cpu_stats[i].selfipis); + totalen += len; + page += len; + } + len = sprintf(page, "%d Recoveries of \"stolen\" FPU\n", + atomic_read(&smtc_fpu_recoveries)); + totalen += len; + page += len; + + return totalen; +} + +void init_smtc_stats(void) +{ + int i; + + for (i=0; i +#include +#include +#include + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +/* + * This file should be built into the kernel only if CONFIG_MIPS_MT_SMTC is set. + */ + +/* + * MIPSCPU_INT_BASE is identically defined in both + * asm-mips/mips-boards/maltaint.h and asm-mips/mips-boards/simint.h, + * but as yet there's no properly organized include structure that + * will ensure that the right *int.h file will be included for a + * given platform build. + */ + +#define MIPSCPU_INT_BASE 16 + +#define MIPS_CPU_IPI_IRQ 1 + +#define LOCK_MT_PRA() \ + local_irq_save(flags); \ + mtflags = dmt() + +#define UNLOCK_MT_PRA() \ + emt(mtflags); \ + local_irq_restore(flags) + +#define LOCK_CORE_PRA() \ + local_irq_save(flags); \ + mtflags = dvpe() + +#define UNLOCK_CORE_PRA() \ + evpe(mtflags); \ + local_irq_restore(flags) + +/* + * Data structures purely associated with SMTC parallelism + */ + + +/* + * Table for tracking ASIDs whose lifetime is prolonged. + */ + +asiduse smtc_live_asid[MAX_SMTC_TLBS][MAX_SMTC_ASIDS]; + +/* + * Clock interrupt "latch" buffers, per "CPU" + */ + +unsigned int ipi_timer_latch[NR_CPUS]; + +/* + * Number of InterProcessor Interupt (IPI) message buffers to allocate + */ + +#define IPIBUF_PER_CPU 4 + +struct smtc_ipi_q IPIQ[NR_CPUS]; +struct smtc_ipi_q freeIPIq; + + +/* Forward declarations */ + +void ipi_decode(struct pt_regs *, struct smtc_ipi *); +void post_direct_ipi(int cpu, struct smtc_ipi *pipi); +void setup_cross_vpe_interrupts(void); +void init_smtc_stats(void); + +/* Global SMTC Status */ + +unsigned int smtc_status = 0; + +/* Boot command line configuration overrides */ + +static int vpelimit = 0; +static int tclimit = 0; +static int ipibuffers = 0; +static int nostlb = 0; +static int asidmask = 0; +unsigned long smtc_asid_mask = 0xff; + +static int __init maxvpes(char *str) +{ + get_option(&str, &vpelimit); + return 1; +} + +static int __init maxtcs(char *str) +{ + get_option(&str, &tclimit); + return 1; +} + +static int __init ipibufs(char *str) +{ + get_option(&str, &ipibuffers); + return 1; +} + +static int __init stlb_disable(char *s) +{ + nostlb = 1; + return 1; +} + +static int __init asidmask_set(char *str) +{ + get_option(&str, &asidmask); + switch(asidmask) { + case 0x1: + case 0x3: + case 0x7: + case 0xf: + case 0x1f: + case 0x3f: + case 0x7f: + case 0xff: + smtc_asid_mask = (unsigned long)asidmask; + break; + default: + printk("ILLEGAL ASID mask 0x%x from command line\n", asidmask); + } + return 1; +} + +__setup("maxvpes=", maxvpes); +__setup("maxtcs=", maxtcs); +__setup("ipibufs=", ipibufs); +__setup("nostlb", stlb_disable); +__setup("asidmask=", asidmask_set); + +/* Enable additional debug checks before going into CPU idle loop */ +#define SMTC_IDLE_HOOK_DEBUG + +#ifdef SMTC_IDLE_HOOK_DEBUG + +static int hang_trig = 0; + +static int __init hangtrig_enable(char *s) +{ + hang_trig = 1; + return 1; +} + + +__setup("hangtrig", hangtrig_enable); + +#define DEFAULT_BLOCKED_IPI_LIMIT 32 + +static int timerq_limit = DEFAULT_BLOCKED_IPI_LIMIT; + +static int __init tintq(char *str) +{ + get_option(&str, &timerq_limit); + return 1; +} + +__setup("tintq=", tintq); + +int imstuckcount[2][8]; +/* vpemask represents IM/IE bits of per-VPE Status registers, low-to-high */ +int vpemask[2][8] = {{0,1,1,0,0,0,0,1},{0,1,0,0,0,0,0,1}}; +int tcnoprog[NR_CPUS]; +static atomic_t idle_hook_initialized = {0}; +static int clock_hang_reported[NR_CPUS]; + +#endif /* SMTC_IDLE_HOOK_DEBUG */ + +/* Initialize shared TLB - the should probably migrate to smtc_setup_cpus() */ + +void __init sanitize_tlb_entries(void) +{ + printk("Deprecated sanitize_tlb_entries() invoked\n"); +} + + +/* + * Configure shared TLB - VPC configuration bit must be set by caller + */ + +void smtc_configure_tlb(void) +{ + int i,tlbsiz,vpes; + unsigned long mvpconf0; + unsigned long config1val; + + /* Set up ASID preservation table */ + for (vpes=0; vpes> MVPCONF0_PVPE_SHIFT) + 1) > 1) { + /* If we have multiple VPEs, try to share the TLB */ + if ((mvpconf0 & MVPCONF0_TLBS) && !nostlb) { + /* + * If TLB sizing is programmable, shared TLB + * size is the total available complement. + * Otherwise, we have to take the sum of all + * static VPE TLB entries. + */ + if ((tlbsiz = ((mvpconf0 & MVPCONF0_PTLBE) + >> MVPCONF0_PTLBE_SHIFT)) == 0) { + /* + * If there's more than one VPE, there had better + * be more than one TC, because we need one to bind + * to each VPE in turn to be able to read + * its configuration state! + */ + settc(1); + /* Stop the TC from doing anything foolish */ + write_tc_c0_tchalt(TCHALT_H); + mips_ihb(); + /* No need to un-Halt - that happens later anyway */ + for (i=0; i < vpes; i++) { + write_tc_c0_tcbind(i); + /* + * To be 100% sure we're really getting the right + * information, we exit the configuration state + * and do an IHB after each rebinding. + */ + write_c0_mvpcontrol( + read_c0_mvpcontrol() & ~ MVPCONTROL_VPC ); + mips_ihb(); + /* + * Only count if the MMU Type indicated is TLB + */ + if(((read_vpe_c0_config() & MIPS_CONF_MT) >> 7) == 1) { + config1val = read_vpe_c0_config1(); + tlbsiz += ((config1val >> 25) & 0x3f) + 1; + } + + /* Put core back in configuration state */ + write_c0_mvpcontrol( + read_c0_mvpcontrol() | MVPCONTROL_VPC ); + mips_ihb(); + } + } + write_c0_mvpcontrol(read_c0_mvpcontrol() | MVPCONTROL_STLB); + + /* + * Setup kernel data structures to use software total, + * rather than read the per-VPE Config1 value. The values + * for "CPU 0" gets copied to all the other CPUs as part + * of their initialization in smtc_cpu_setup(). + */ + + tlbsiz = tlbsiz & 0x3f; /* MIPS32 limits TLB indices to 64 */ + cpu_data[0].tlbsize = tlbsiz; + smtc_status |= SMTC_TLB_SHARED; + + printk("TLB of %d entry pairs shared by %d VPEs\n", + tlbsiz, vpes); + } else { + printk("WARNING: TLB Not Sharable on SMTC Boot!\n"); + } + } +} + + +/* + * Incrementally build the CPU map out of constituent MIPS MT cores, + * using the specified available VPEs and TCs. Plaform code needs + * to ensure that each MIPS MT core invokes this routine on reset, + * one at a time(!). + * + * This version of the build_cpu_map and prepare_cpus routines assumes + * that *all* TCs of a MIPS MT core will be used for Linux, and that + * they will be spread across *all* available VPEs (to minimise the + * loss of efficiency due to exception service serialization). + * An improved version would pick up configuration information and + * possibly leave some TCs/VPEs as "slave" processors. + * + * Use c0_MVPConf0 to find out how many TCs are available, setting up + * phys_cpu_present_map and the logical/physical mappings. + */ + +int __init mipsmt_build_cpu_map(int start_cpu_slot) +{ + int i, ntcs; + + /* + * The CPU map isn't actually used for anything at this point, + * so it's not clear what else we should do apart from set + * everything up so that "logical" = "physical". + */ + ntcs = ((read_c0_mvpconf0() & MVPCONF0_PTC) >> MVPCONF0_PTC_SHIFT) + 1; + for (i=start_cpu_slot; i 0) + printk("Limit of %d VPEs set\n", vpelimit); + if (tclimit > 0) + printk("Limit of %d TCs set\n", tclimit); + if (nostlb) { + printk("Shared TLB Use Inhibited - UNSAFE for Multi-VPE Operation\n"); + } + if (asidmask) + printk("ASID mask value override to 0x%x\n", asidmask); + + /* Temporary */ +#ifdef SMTC_IDLE_HOOK_DEBUG + if (hang_trig) + printk("Logic Analyser Trigger on suspected TC hang\n"); +#endif /* SMTC_IDLE_HOOK_DEBUG */ + + /* Put MVPE's into 'configuration state' */ + write_c0_mvpcontrol( read_c0_mvpcontrol() | MVPCONTROL_VPC ); + + val = read_c0_mvpconf0(); + nvpe = ((val & MVPCONF0_PVPE) >> MVPCONF0_PVPE_SHIFT) + 1; + if (vpelimit > 0 && nvpe > vpelimit) + nvpe = vpelimit; + ntc = ((val & MVPCONF0_PTC) >> MVPCONF0_PTC_SHIFT) + 1; + if (ntc > NR_CPUS) + ntc = NR_CPUS; + if (tclimit > 0 && ntc > tclimit) + ntc = tclimit; + tcpervpe = ntc / nvpe; + slop = ntc % nvpe; /* Residual TCs, < NVPE */ + + /* Set up shared TLB */ + smtc_configure_tlb(); + + for (tc = 0, vpe = 0 ; (vpe < nvpe) && (tc < ntc) ; vpe++) { + /* + * Set the MVP bits. + */ + settc(tc); + write_vpe_c0_vpeconf0(read_vpe_c0_vpeconf0() | VPECONF0_MVP); + if (vpe != 0) + printk(", "); + printk("VPE %d: TC", vpe); + for (i = 0; i < tcpervpe; i++) { + /* + * TC 0 is bound to VPE 0 at reset, + * and is presumably executing this + * code. Leave it alone! + */ + if (tc != 0) { + smtc_tc_setup(vpe,tc, cpu); + cpu++; + } + printk(" %d", tc); + tc++; + } + if (slop) { + if (tc != 0) { + smtc_tc_setup(vpe,tc, cpu); + cpu++; + } + printk(" %d", tc); + tc++; + slop--; + } + if (vpe != 0) { + /* + * Clear any stale software interrupts from VPE's Cause + */ + write_vpe_c0_cause(0); + + /* + * Clear ERL/EXL of VPEs other than 0 + * and set restricted interrupt enable/mask. + */ + write_vpe_c0_status((read_vpe_c0_status() + & ~(ST0_BEV | ST0_ERL | ST0_EXL | ST0_IM)) + | (STATUSF_IP0 | STATUSF_IP1 | STATUSF_IP7 + | ST0_IE)); + /* + * set config to be the same as vpe0, + * particularly kseg0 coherency alg + */ + write_vpe_c0_config(read_c0_config()); + /* Clear any pending timer interrupt */ + write_vpe_c0_compare(0); + /* Propagate Config7 */ + write_vpe_c0_config7(read_c0_config7()); + } + /* enable multi-threading within VPE */ + write_vpe_c0_vpecontrol(read_vpe_c0_vpecontrol() | VPECONTROL_TE); + /* enable the VPE */ + write_vpe_c0_vpeconf0(read_vpe_c0_vpeconf0() | VPECONF0_VPA); + } + + /* + * Pull any physically present but unused TCs out of circulation. + */ + while (tc < (((val & MVPCONF0_PTC) >> MVPCONF0_PTC_SHIFT) + 1)) { + cpu_clear(tc, phys_cpu_present_map); + cpu_clear(tc, cpu_present_map); + tc++; + } + + /* release config state */ + write_c0_mvpcontrol( read_c0_mvpcontrol() & ~ MVPCONTROL_VPC ); + + printk("\n"); + + /* Set up coprocessor affinity CPU mask(s) */ + + for (tc = 0; tc < ntc; tc++) { + if(cpu_data[tc].options & MIPS_CPU_FPU) + cpu_set(tc, mt_fpu_cpumask); + } + + /* set up ipi interrupts... */ + + /* If we have multiple VPEs running, set up the cross-VPE interrupt */ + + if (nvpe > 1) + setup_cross_vpe_interrupts(); + + /* Set up queue of free IPI "messages". */ + nipi = NR_CPUS * IPIBUF_PER_CPU; + if (ipibuffers > 0) + nipi = ipibuffers; + + pipi = kmalloc(nipi *sizeof(struct smtc_ipi), GFP_KERNEL); + if (pipi == NULL) + panic("kmalloc of IPI message buffers failed\n"); + else + printk("IPI buffer pool of %d buffers\n", nipi); + for (i = 0; i < nipi; i++) { + smtc_ipi_nq(&freeIPIq, pipi); + pipi++; + } + + /* Arm multithreading and enable other VPEs - but all TCs are Halted */ + emt(EMT_ENABLE); + evpe(EVPE_ENABLE); + local_irq_restore(flags); + /* Initialize SMTC /proc statistics/diagnostics */ + init_smtc_stats(); +} + + +/* + * Setup the PC, SP, and GP of a secondary processor and start it + * running! + * smp_bootstrap is the place to resume from + * __KSTK_TOS(idle) is apparently the stack pointer + * (unsigned long)idle->thread_info the gp + * + */ +void smtc_boot_secondary(int cpu, struct task_struct *idle) +{ + extern u32 kernelsp[NR_CPUS]; + long flags; + int mtflags; + + LOCK_MT_PRA(); + if (cpu_data[cpu].vpe_id != cpu_data[smp_processor_id()].vpe_id) { + dvpe(); + } + settc(cpu_data[cpu].tc_id); + + /* pc */ + write_tc_c0_tcrestart((unsigned long)&smp_bootstrap); + + /* stack pointer */ + kernelsp[cpu] = __KSTK_TOS(idle); + write_tc_gpr_sp(__KSTK_TOS(idle)); + + /* global pointer */ + write_tc_gpr_gp((unsigned long)idle->thread_info); + + smtc_status |= SMTC_MTC_ACTIVE; + write_tc_c0_tchalt(0); + if (cpu_data[cpu].vpe_id != cpu_data[smp_processor_id()].vpe_id) { + evpe(EVPE_ENABLE); + } + UNLOCK_MT_PRA(); +} + +void smtc_init_secondary(void) +{ + /* + * Start timer on secondary VPEs if necessary. + * mips_timer_setup should already have been invoked by init/main + * on "boot" TC. Like per_cpu_trap_init() hack, this assumes that + * SMTC init code assigns TCs consdecutively and in ascending order + * to across available VPEs. + */ + if(((read_c0_tcbind() & TCBIND_CURTC) != 0) + && ((read_c0_tcbind() & TCBIND_CURVPE) + != cpu_data[smp_processor_id() - 1].vpe_id)){ + write_c0_compare (read_c0_count() + mips_hpt_frequency/HZ); + } + + local_irq_enable(); +} + +void smtc_smp_finish(void) +{ + printk("TC %d going on-line as CPU %d\n", + cpu_data[smp_processor_id()].tc_id, smp_processor_id()); +} + +void smtc_cpus_done(void) +{ +} + +/* + * Support for SMTC-optimized driver IRQ registration + */ + +/* + * SMTC Kernel needs to manipulate low-level CPU interrupt mask + * in do_IRQ. These are passed in setup_irq_smtc() and stored + * in this table. + */ + +int setup_irq_smtc(unsigned int irq, struct irqaction * new, + unsigned long hwmask) +{ + irq_hwmask[irq] = hwmask; + + return setup_irq(irq, new); +} + +/* + * IPI model for SMTC is tricky, because interrupts aren't TC-specific. + * Within a VPE one TC can interrupt another by different approaches. + * The easiest to get right would probably be to make all TCs except + * the target IXMT and set a software interrupt, but an IXMT-based + * scheme requires that a handler must run before a new IPI could + * be sent, which would break the "broadcast" loops in MIPS MT. + * A more gonzo approach within a VPE is to halt the TC, extract + * its Restart, Status, and a couple of GPRs, and program the Restart + * address to emulate an interrupt. + * + * Within a VPE, one can be confident that the target TC isn't in + * a critical EXL state when halted, since the write to the Halt + * register could not have issued on the writing thread if the + * halting thread had EXL set. So k0 and k1 of the target TC + * can be used by the injection code. Across VPEs, one can't + * be certain that the target TC isn't in a critical exception + * state. So we try a two-step process of sending a software + * interrupt to the target VPE, which either handles the event + * itself (if it was the target) or injects the event within + * the VPE. + */ + +void smtc_ipi_qdump(void) +{ + int i; + + for (i = 0; i < NR_CPUS ;i++) { + printk("IPIQ[%d]: head = 0x%x, tail = 0x%x, depth = %d\n", + i, (unsigned)IPIQ[i].head, (unsigned)IPIQ[i].tail, + IPIQ[i].depth); + } +} + +/* + * The standard atomic.h primitives don't quite do what we want + * here: We need an atomic add-and-return-previous-value (which + * could be done with atomic_add_return and a decrement) and an + * atomic set/zero-and-return-previous-value (which can't really + * be done with the atomic.h primitives). And since this is + * MIPS MT, we can assume that we have LL/SC. + */ +static __inline__ int atomic_postincrement(unsigned int *pv) +{ + unsigned long result; + + unsigned long temp; + + __asm__ __volatile__( + "1: ll %0, %2 \n" + " addu %1, %0, 1 \n" + " sc %1, %2 \n" + " beqz %1, 1b \n" + " sync \n" + : "=&r" (result), "=&r" (temp), "=m" (*pv) + : "m" (*pv) + : "memory"); + + return result; +} + +/* No longer used in IPI dispatch, but retained for future recycling */ + +static __inline__ int atomic_postclear(unsigned int *pv) +{ + unsigned long result; + + unsigned long temp; + + __asm__ __volatile__( + "1: ll %0, %2 \n" + " or %1, $0, $0 \n" + " sc %1, %2 \n" + " beqz %1, 1b \n" + " sync \n" + : "=&r" (result), "=&r" (temp), "=m" (*pv) + : "m" (*pv) + : "memory"); + + return result; +} + + +void smtc_send_ipi(int cpu, int type, unsigned int action) +{ + int tcstatus; + struct smtc_ipi *pipi; + long flags; + int mtflags; + + if (cpu == smp_processor_id()) { + printk("Cannot Send IPI to self!\n"); + return; + } + /* Set up a descriptor, to be delivered either promptly or queued */ + pipi = smtc_ipi_dq(&freeIPIq); + if (pipi == NULL) { + bust_spinlocks(1); + mips_mt_regdump(dvpe()); + panic("IPI Msg. Buffers Depleted\n"); + } + pipi->type = type; + pipi->arg = (void *)action; + pipi->dest = cpu; + if (cpu_data[cpu].vpe_id != cpu_data[smp_processor_id()].vpe_id) { + /* If not on same VPE, enqueue and send cross-VPE interupt */ + smtc_ipi_nq(&IPIQ[cpu], pipi); + LOCK_CORE_PRA(); + settc(cpu_data[cpu].tc_id); + write_vpe_c0_cause(read_vpe_c0_cause() | C_SW1); + UNLOCK_CORE_PRA(); + } else { + /* + * Not sufficient to do a LOCK_MT_PRA (dmt) here, + * since ASID shootdown on the other VPE may + * collide with this operation. + */ + LOCK_CORE_PRA(); + settc(cpu_data[cpu].tc_id); + /* Halt the targeted TC */ + write_tc_c0_tchalt(TCHALT_H); + mips_ihb(); + + /* + * Inspect TCStatus - if IXMT is set, we have to queue + * a message. Otherwise, we set up the "interrupt" + * of the other TC + */ + tcstatus = read_tc_c0_tcstatus(); + + if ((tcstatus & TCSTATUS_IXMT) != 0) { + /* + * Spin-waiting here can deadlock, + * so we queue the message for the target TC. + */ + write_tc_c0_tchalt(0); + UNLOCK_CORE_PRA(); + /* Try to reduce redundant timer interrupt messages */ + if(type == SMTC_CLOCK_TICK) { + if(atomic_postincrement(&ipi_timer_latch[cpu])!=0) { + smtc_ipi_nq(&freeIPIq, pipi); + return; + } + } + smtc_ipi_nq(&IPIQ[cpu], pipi); + } else { + post_direct_ipi(cpu, pipi); + write_tc_c0_tchalt(0); + UNLOCK_CORE_PRA(); + } + } +} + +/* + * Send IPI message to Halted TC, TargTC/TargVPE already having been set + */ +void post_direct_ipi(int cpu, struct smtc_ipi *pipi) +{ + struct pt_regs *kstack; + unsigned long tcstatus; + unsigned long tcrestart; + extern u32 kernelsp[NR_CPUS]; + extern void __smtc_ipi_vector(void); + + /* Extract Status, EPC from halted TC */ + tcstatus = read_tc_c0_tcstatus(); + tcrestart = read_tc_c0_tcrestart(); + /* If TCRestart indicates a WAIT instruction, advance the PC */ + if ((tcrestart & 0x80000000) + && ((*(unsigned int *)tcrestart & 0xfe00003f) == 0x42000020)) { + tcrestart += 4; + } + /* + * Save on TC's future kernel stack + * + * CU bit of Status is indicator that TC was + * already running on a kernel stack... + */ + if(tcstatus & ST0_CU0) { + /* Note that this "- 1" is pointer arithmetic */ + kstack = ((struct pt_regs *)read_tc_gpr_sp()) - 1; + } else { + kstack = ((struct pt_regs *)kernelsp[cpu]) - 1; + } + + kstack->cp0_epc = (long)tcrestart; + /* Save TCStatus */ + kstack->cp0_tcstatus = tcstatus; + /* Pass token of operation to be performed kernel stack pad area */ + kstack->pad0[4] = (unsigned long)pipi; + /* Pass address of function to be called likewise */ + kstack->pad0[5] = (unsigned long)&ipi_decode; + /* Set interrupt exempt and kernel mode */ + tcstatus |= TCSTATUS_IXMT; + tcstatus &= ~TCSTATUS_TKSU; + write_tc_c0_tcstatus(tcstatus); + ehb(); + /* Set TC Restart address to be SMTC IPI vector */ + write_tc_c0_tcrestart(__smtc_ipi_vector); +} + +void ipi_resched_interrupt(struct pt_regs *regs) +{ + /* Return from interrupt should be enough to cause scheduler check */ +} + + +void ipi_call_interrupt(struct pt_regs *regs) +{ + /* Invoke generic function invocation code in smp.c */ + smp_call_function_interrupt(); +} + +void ipi_decode(struct pt_regs *regs, struct smtc_ipi *pipi) +{ + void *arg_copy = pipi->arg; + int type_copy = pipi->type; + int dest_copy = pipi->dest; + + smtc_ipi_nq(&freeIPIq, pipi); + switch (type_copy) { + case SMTC_CLOCK_TICK: + /* Invoke Clock "Interrupt" */ + ipi_timer_latch[dest_copy] = 0; +#ifdef SMTC_IDLE_HOOK_DEBUG + clock_hang_reported[dest_copy] = 0; +#endif /* SMTC_IDLE_HOOK_DEBUG */ + local_timer_interrupt(0, NULL, regs); + break; + case LINUX_SMP_IPI: + switch ((int)arg_copy) { + case SMP_RESCHEDULE_YOURSELF: + ipi_resched_interrupt(regs); + break; + case SMP_CALL_FUNCTION: + ipi_call_interrupt(regs); + break; + default: + printk("Impossible SMTC IPI Argument 0x%x\n", + (int)arg_copy); + break; + } + break; + default: + printk("Impossible SMTC IPI Type 0x%x\n", type_copy); + break; + } +} + +void deferred_smtc_ipi(struct pt_regs *regs) +{ + struct smtc_ipi *pipi; + unsigned long flags; +/* DEBUG */ + int q = smp_processor_id(); + + /* + * Test is not atomic, but much faster than a dequeue, + * and the vast majority of invocations will have a null queue. + */ + if(IPIQ[q].head != NULL) { + while((pipi = smtc_ipi_dq(&IPIQ[q])) != NULL) { + /* ipi_decode() should be called with interrupts off */ + local_irq_save(flags); + ipi_decode(regs, pipi); + local_irq_restore(flags); + } + } +} + +/* + * Send clock tick to all TCs except the one executing the funtion + */ + +void smtc_timer_broadcast(int vpe) +{ + int cpu; + int myTC = cpu_data[smp_processor_id()].tc_id; + int myVPE = cpu_data[smp_processor_id()].vpe_id; + + smtc_cpu_stats[smp_processor_id()].timerints++; + + for_each_online_cpu(cpu) { + if (cpu_data[cpu].vpe_id == myVPE && + cpu_data[cpu].tc_id != myTC) + smtc_send_ipi(cpu, SMTC_CLOCK_TICK, 0); + } +} + +/* + * Cross-VPE interrupts in the SMTC prototype use "software interrupts" + * set via cross-VPE MTTR manipulation of the Cause register. It would be + * in some regards preferable to have external logic for "doorbell" hardware + * interrupts. + */ + +static int cpu_ipi_irq = MIPSCPU_INT_BASE + MIPS_CPU_IPI_IRQ; + +static irqreturn_t ipi_interrupt(int irq, void *dev_idm, struct pt_regs *regs) +{ + int my_vpe = cpu_data[smp_processor_id()].vpe_id; + int my_tc = cpu_data[smp_processor_id()].tc_id; + int cpu; + struct smtc_ipi *pipi; + unsigned long tcstatus; + int sent; + long flags; + unsigned int mtflags; + unsigned int vpflags; + + /* + * So long as cross-VPE interrupts are done via + * MFTR/MTTR read-modify-writes of Cause, we need + * to stop other VPEs whenever the local VPE does + * anything similar. + */ + local_irq_save(flags); + vpflags = dvpe(); + clear_c0_cause(0x100 << MIPS_CPU_IPI_IRQ); + set_c0_status(0x100 << MIPS_CPU_IPI_IRQ); + irq_enable_hazard(); + evpe(vpflags); + local_irq_restore(flags); + + /* + * Cross-VPE Interrupt handler: Try to directly deliver IPIs + * queued for TCs on this VPE other than the current one. + * Return-from-interrupt should cause us to drain the queue + * for the current TC, so we ought not to have to do it explicitly here. + */ + + for_each_online_cpu(cpu) { + if (cpu_data[cpu].vpe_id != my_vpe) + continue; + + pipi = smtc_ipi_dq(&IPIQ[cpu]); + if (pipi != NULL) { + if (cpu_data[cpu].tc_id != my_tc) { + sent = 0; + LOCK_MT_PRA(); + settc(cpu_data[cpu].tc_id); + write_tc_c0_tchalt(TCHALT_H); + mips_ihb(); + tcstatus = read_tc_c0_tcstatus(); + if ((tcstatus & TCSTATUS_IXMT) == 0) { + post_direct_ipi(cpu, pipi); + sent = 1; + } + write_tc_c0_tchalt(0); + UNLOCK_MT_PRA(); + if (!sent) { + smtc_ipi_req(&IPIQ[cpu], pipi); + } + } else { + /* + * ipi_decode() should be called + * with interrupts off + */ + local_irq_save(flags); + ipi_decode(regs, pipi); + local_irq_restore(flags); + } + } + } + + return IRQ_HANDLED; +} + +static void ipi_irq_dispatch(struct pt_regs *regs) +{ + do_IRQ(cpu_ipi_irq, regs); +} + +static struct irqaction irq_ipi; + +void setup_cross_vpe_interrupts(void) +{ + if (!cpu_has_vint) + panic("SMTC Kernel requires Vectored Interupt support"); + + set_vi_handler(MIPS_CPU_IPI_IRQ, ipi_irq_dispatch); + + irq_ipi.handler = ipi_interrupt; + irq_ipi.flags = SA_INTERRUPT; + irq_ipi.name = "SMTC_IPI"; + + setup_irq_smtc(cpu_ipi_irq, &irq_ipi, (0x100 << MIPS_CPU_IPI_IRQ)); + + irq_desc[cpu_ipi_irq].status |= IRQ_PER_CPU; +} + +/* + * SMTC-specific hacks invoked from elsewhere in the kernel. + */ + +void smtc_idle_loop_hook(void) +{ +#ifdef SMTC_IDLE_HOOK_DEBUG + int im; + int flags; + int mtflags; + int bit; + int vpe; + int tc; + int hook_ntcs; + /* + * printk within DMT-protected regions can deadlock, + * so buffer diagnostic messages for later output. + */ + char *pdb_msg; + char id_ho_db_msg[768]; /* worst-case use should be less than 700 */ + + if (atomic_read(&idle_hook_initialized) == 0) { /* fast test */ + if (atomic_add_return(1, &idle_hook_initialized) == 1) { + int mvpconf0; + /* Tedious stuff to just do once */ + mvpconf0 = read_c0_mvpconf0(); + hook_ntcs = ((mvpconf0 & MVPCONF0_PTC) >> MVPCONF0_PTC_SHIFT) + 1; + if (hook_ntcs > NR_CPUS) + hook_ntcs = NR_CPUS; + for (tc = 0; tc < hook_ntcs; tc++) { + tcnoprog[tc] = 0; + clock_hang_reported[tc] = 0; + } + for (vpe = 0; vpe < 2; vpe++) + for (im = 0; im < 8; im++) + imstuckcount[vpe][im] = 0; + printk("Idle loop test hook initialized for %d TCs\n", hook_ntcs); + atomic_set(&idle_hook_initialized, 1000); + } else { + /* Someone else is initializing in parallel - let 'em finish */ + while (atomic_read(&idle_hook_initialized) < 1000) + ; + } + } + + /* Have we stupidly left IXMT set somewhere? */ + if (read_c0_tcstatus() & 0x400) { + write_c0_tcstatus(read_c0_tcstatus() & ~0x400); + ehb(); + printk("Dangling IXMT in cpu_idle()\n"); + } + + /* Have we stupidly left an IM bit turned off? */ +#define IM_LIMIT 2000 + local_irq_save(flags); + mtflags = dmt(); + pdb_msg = &id_ho_db_msg[0]; + im = read_c0_status(); + vpe = cpu_data[smp_processor_id()].vpe_id; + for (bit = 0; bit < 8; bit++) { + /* + * In current prototype, I/O interrupts + * are masked for VPE > 0 + */ + if (vpemask[vpe][bit]) { + if (!(im & (0x100 << bit))) + imstuckcount[vpe][bit]++; + else + imstuckcount[vpe][bit] = 0; + if (imstuckcount[vpe][bit] > IM_LIMIT) { + set_c0_status(0x100 << bit); + ehb(); + imstuckcount[vpe][bit] = 0; + pdb_msg += sprintf(pdb_msg, + "Dangling IM %d fixed for VPE %d\n", bit, + vpe); + } + } + } + + /* + * Now that we limit outstanding timer IPIs, check for hung TC + */ + for (tc = 0; tc < NR_CPUS; tc++) { + /* Don't check ourself - we'll dequeue IPIs just below */ + if ((tc != smp_processor_id()) && + ipi_timer_latch[tc] > timerq_limit) { + if (clock_hang_reported[tc] == 0) { + pdb_msg += sprintf(pdb_msg, + "TC %d looks hung with timer latch at %d\n", + tc, ipi_timer_latch[tc]); + clock_hang_reported[tc]++; + } + } + } + emt(mtflags); + local_irq_restore(flags); + if (pdb_msg != &id_ho_db_msg[0]) + printk("CPU%d: %s", smp_processor_id(), id_ho_db_msg); +#endif /* SMTC_IDLE_HOOK_DEBUG */ + /* + * To the extent that we've ever turned interrupts off, + * we may have accumulated deferred IPIs. This is subtle. + * If we use the smtc_ipi_qdepth() macro, we'll get an + * exact number - but we'll also disable interrupts + * and create a window of failure where a new IPI gets + * queued after we test the depth but before we re-enable + * interrupts. So long as IXMT never gets set, however, + * we should be OK: If we pick up something and dispatch + * it here, that's great. If we see nothing, but concurrent + * with this operation, another TC sends us an IPI, IXMT + * is clear, and we'll handle it as a real pseudo-interrupt + * and not a pseudo-pseudo interrupt. + */ + if (IPIQ[smp_processor_id()].depth > 0) { + struct smtc_ipi *pipi; + extern void self_ipi(struct smtc_ipi *); + + if ((pipi = smtc_ipi_dq(&IPIQ[smp_processor_id()])) != NULL) { + self_ipi(pipi); + smtc_cpu_stats[smp_processor_id()].selfipis++; + } + } +} + +void smtc_soft_dump(void) +{ + int i; + + printk("Counter Interrupts taken per CPU (TC)\n"); + for (i=0; i < NR_CPUS; i++) { + printk("%d: %ld\n", i, smtc_cpu_stats[i].timerints); + } + printk("Self-IPI invocations:\n"); + for (i=0; i < NR_CPUS; i++) { + printk("%d: %ld\n", i, smtc_cpu_stats[i].selfipis); + } + smtc_ipi_qdump(); + printk("Timer IPI Backlogs:\n"); + for (i=0; i < NR_CPUS; i++) { + printk("%d: %d\n", i, ipi_timer_latch[i]); + } + printk("%d Recoveries of \"stolen\" FPU\n", + atomic_read(&smtc_fpu_recoveries)); +} + + +/* + * TLB management routines special to SMTC + */ + +void smtc_get_new_mmu_context(struct mm_struct *mm, unsigned long cpu) +{ + unsigned long flags, mtflags, tcstat, prevhalt, asid; + int tlb, i; + + /* + * It would be nice to be able to use a spinlock here, + * but this is invoked from within TLB flush routines + * that protect themselves with DVPE, so if a lock is + * held by another TC, it'll never be freed. + * + * DVPE/DMT must not be done with interrupts enabled, + * so even so most callers will already have disabled + * them, let's be really careful... + */ + + local_irq_save(flags); + if (smtc_status & SMTC_TLB_SHARED) { + mtflags = dvpe(); + tlb = 0; + } else { + mtflags = dmt(); + tlb = cpu_data[cpu].vpe_id; + } + asid = asid_cache(cpu); + + do { + if (!((asid += ASID_INC) & ASID_MASK) ) { + if (cpu_has_vtag_icache) + flush_icache_all(); + /* Traverse all online CPUs (hack requires contigous range) */ + for (i = 0; i < num_online_cpus(); i++) { + /* + * We don't need to worry about our own CPU, nor those of + * CPUs who don't share our TLB. + */ + if ((i != smp_processor_id()) && + ((smtc_status & SMTC_TLB_SHARED) || + (cpu_data[i].vpe_id == cpu_data[cpu].vpe_id))) { + settc(cpu_data[i].tc_id); + prevhalt = read_tc_c0_tchalt() & TCHALT_H; + if (!prevhalt) { + write_tc_c0_tchalt(TCHALT_H); + mips_ihb(); + } + tcstat = read_tc_c0_tcstatus(); + smtc_live_asid[tlb][(tcstat & ASID_MASK)] |= (asiduse)(0x1 << i); + if (!prevhalt) + write_tc_c0_tchalt(0); + } + } + if (!asid) /* fix version if needed */ + asid = ASID_FIRST_VERSION; + local_flush_tlb_all(); /* start new asid cycle */ + } + } while (smtc_live_asid[tlb][(asid & ASID_MASK)]); + + /* + * SMTC shares the TLB within VPEs and possibly across all VPEs. + */ + for (i = 0; i < num_online_cpus(); i++) { + if ((smtc_status & SMTC_TLB_SHARED) || + (cpu_data[i].vpe_id == cpu_data[cpu].vpe_id)) + cpu_context(i, mm) = asid_cache(i) = asid; + } + + if (smtc_status & SMTC_TLB_SHARED) + evpe(mtflags); + else + emt(mtflags); + local_irq_restore(flags); +} + +/* + * Invoked from macros defined in mmu_context.h + * which must already have disabled interrupts + * and done a DVPE or DMT as appropriate. + */ + +void smtc_flush_tlb_asid(unsigned long asid) +{ + int entry; + unsigned long ehi; + + entry = read_c0_wired(); + + /* Traverse all non-wired entries */ + while (entry < current_cpu_data.tlbsize) { + write_c0_index(entry); + ehb(); + tlb_read(); + ehb(); + ehi = read_c0_entryhi(); + if((ehi & ASID_MASK) == asid) { + /* + * Invalidate only entries with specified ASID, + * makiing sure all entries differ. + */ + write_c0_entryhi(CKSEG0 + (entry << (PAGE_SHIFT + 1))); + write_c0_entrylo0(0); + write_c0_entrylo1(0); + mtc0_tlbw_hazard(); + tlb_write_indexed(); + } + entry++; + } + write_c0_index(PARKED_INDEX); + tlbw_use_hazard(); +} + +/* + * Support for single-threading cache flush operations. + */ + +int halt_state_save[NR_CPUS]; + +/* + * To really, really be sure that nothing is being done + * by other TCs, halt them all. This code assumes that + * a DVPE has already been done, so while their Halted + * state is theoretically architecturally unstable, in + * practice, it's not going to change while we're looking + * at it. + */ + +void smtc_cflush_lockdown(void) +{ + int cpu; + + for_each_online_cpu(cpu) { + if (cpu != smp_processor_id()) { + settc(cpu_data[cpu].tc_id); + halt_state_save[cpu] = read_tc_c0_tchalt(); + write_tc_c0_tchalt(TCHALT_H); + } + } + mips_ihb(); +} + +/* It would be cheating to change the cpu_online states during a flush! */ + +void smtc_cflush_release(void) +{ + int cpu; + + /* + * Start with a hazard barrier to ensure + * that all CACHE ops have played through. + */ + mips_ihb(); + + for_each_online_cpu(cpu) { + if (cpu != smp_processor_id()) { + settc(cpu_data[cpu].tc_id); + write_tc_c0_tchalt(halt_state_save[cpu]); + } + } + mips_ihb(); +} diff --git a/arch/mips/kernel/time.c b/arch/mips/kernel/time.c index 5e51a2d8f3f..13ff4da598c 100644 --- a/arch/mips/kernel/time.c +++ b/arch/mips/kernel/time.c @@ -116,8 +116,7 @@ static void c0_timer_ack(void) write_c0_compare(expirelo); /* Check to see if we have missed any timer interrupts. */ - count = read_c0_count(); - if ((count - expirelo) < 0x7fffffff) { + while (((count = read_c0_count()) - expirelo) < 0x7fffffff) { /* missed_timer_count++; */ expirelo = count + cycles_per_jiffy; write_c0_compare(expirelo); diff --git a/arch/mips/kernel/traps.c b/arch/mips/kernel/traps.c index 081e6ed5bb6..6336fe8008e 100644 --- a/arch/mips/kernel/traps.c +++ b/arch/mips/kernel/traps.c @@ -280,9 +280,16 @@ static DEFINE_SPINLOCK(die_lock); NORET_TYPE void ATTRIB_NORET die(const char * str, struct pt_regs * regs) { static int die_counter; +#ifdef CONFIG_MIPS_MT_SMTC + unsigned long dvpret = dvpe(); +#endif /* CONFIG_MIPS_MT_SMTC */ console_verbose(); spin_lock_irq(&die_lock); + bust_spinlocks(1); +#ifdef CONFIG_MIPS_MT_SMTC + mips_mt_regdump(dvpret); +#endif /* CONFIG_MIPS_MT_SMTC */ printk("%s[#%d]:\n", str, ++die_counter); show_registers(regs); spin_unlock_irq(&die_lock); @@ -757,6 +764,7 @@ asmlinkage void do_cpu(struct pt_regs *regs) case 2: case 3: + die_if_kernel("do_cpu invoked from kernel context!", regs); break; } @@ -794,6 +802,36 @@ asmlinkage void do_mcheck(struct pt_regs *regs) asmlinkage void do_mt(struct pt_regs *regs) { + int subcode; + + die_if_kernel("MIPS MT Thread exception in kernel", regs); + + subcode = (read_vpe_c0_vpecontrol() & VPECONTROL_EXCPT) + >> VPECONTROL_EXCPT_SHIFT; + switch (subcode) { + case 0: + printk(KERN_ERR "Thread Underflow\n"); + break; + case 1: + printk(KERN_ERR "Thread Overflow\n"); + break; + case 2: + printk(KERN_ERR "Invalid YIELD Qualifier\n"); + break; + case 3: + printk(KERN_ERR "Gating Storage Exception\n"); + break; + case 4: + printk(KERN_ERR "YIELD Scheduler Exception\n"); + break; + case 5: + printk(KERN_ERR "Gating Storage Schedulier Exception\n"); + break; + default: + printk(KERN_ERR "*** UNKNOWN THREAD EXCEPTION %d ***\n", + subcode); + break; + } die_if_kernel("MIPS MT Thread exception in kernel", regs); force_sig(SIGILL, current); @@ -929,7 +967,15 @@ void ejtag_exception_handler(struct pt_regs *regs) */ void nmi_exception_handler(struct pt_regs *regs) { +#ifdef CONFIG_MIPS_MT_SMTC + unsigned long dvpret = dvpe(); + bust_spinlocks(1); + printk("NMI taken!!!!\n"); + mips_mt_regdump(dvpret); +#else + bust_spinlocks(1); printk("NMI taken!!!!\n"); +#endif /* CONFIG_MIPS_MT_SMTC */ die("NMI", regs); while(1) ; } @@ -1007,7 +1053,7 @@ again: return set; } -void mips_srs_free (int set) +void mips_srs_free(int set) { struct shadow_registers *sr = &shadow_registers; @@ -1027,8 +1073,7 @@ static void *set_vi_srs_handler(int n, void *addr, int srs) if (addr == NULL) { handler = (unsigned long) do_default_vi; srs = 0; - } - else + } else handler = (unsigned long) addr; vi_handlers[n] = (unsigned long) addr; @@ -1040,8 +1085,7 @@ static void *set_vi_srs_handler(int n, void *addr, int srs) if (cpu_has_veic) { if (board_bind_eic_interrupt) board_bind_eic_interrupt (n, srs); - } - else if (cpu_has_vint) { + } else if (cpu_has_vint) { /* SRSMap is only defined if shadow sets are implemented */ if (mips_srs_max() > 1) change_c0_srsmap (0xf << n*4, srs << n*4); @@ -1055,6 +1099,15 @@ static void *set_vi_srs_handler(int n, void *addr, int srs) extern char except_vec_vi, except_vec_vi_lui; extern char except_vec_vi_ori, except_vec_vi_end; +#ifdef CONFIG_MIPS_MT_SMTC + /* + * We need to provide the SMTC vectored interrupt handler + * not only with the address of the handler, but with the + * Status.IM bit to be masked before going there. + */ + extern char except_vec_vi_mori; + const int mori_offset = &except_vec_vi_mori - &except_vec_vi; +#endif /* CONFIG_MIPS_MT_SMTC */ const int handler_len = &except_vec_vi_end - &except_vec_vi; const int lui_offset = &except_vec_vi_lui - &except_vec_vi; const int ori_offset = &except_vec_vi_ori - &except_vec_vi; @@ -1068,6 +1121,12 @@ static void *set_vi_srs_handler(int n, void *addr, int srs) } memcpy (b, &except_vec_vi, handler_len); +#ifdef CONFIG_MIPS_MT_SMTC + if (n > 7) + printk("Vector index %d exceeds SMTC maximum\n", n); + w = (u32 *)(b + mori_offset); + *w = (*w & 0xffff0000) | (0x100 << n); +#endif /* CONFIG_MIPS_MT_SMTC */ w = (u32 *)(b + lui_offset); *w = (*w & 0xffff0000) | (((u32)handler >> 16) & 0xffff); w = (u32 *)(b + ori_offset); @@ -1090,7 +1149,7 @@ static void *set_vi_srs_handler(int n, void *addr, int srs) return (void *)old_handler; } -void *set_vi_handler (int n, void *addr) +void *set_vi_handler(int n, void *addr) { return set_vi_srs_handler(n, addr, 0); } @@ -1108,8 +1167,29 @@ extern asmlinkage int _restore_fp_context(struct sigcontext *sc); extern asmlinkage int fpu_emulator_save_context(struct sigcontext *sc); extern asmlinkage int fpu_emulator_restore_context(struct sigcontext *sc); +#ifdef CONFIG_SMP +static int smp_save_fp_context(struct sigcontext *sc) +{ + return cpu_has_fpu + ? _save_fp_context(sc) + : fpu_emulator_save_context(sc); +} + +static int smp_restore_fp_context(struct sigcontext *sc) +{ + return cpu_has_fpu + ? _restore_fp_context(sc) + : fpu_emulator_restore_context(sc); +} +#endif + static inline void signal_init(void) { +#ifdef CONFIG_SMP + /* For now just do the cpu_has_fpu check when the functions are invoked */ + save_fp_context = smp_save_fp_context; + restore_fp_context = smp_restore_fp_context; +#else if (cpu_has_fpu) { save_fp_context = _save_fp_context; restore_fp_context = _restore_fp_context; @@ -1117,6 +1197,7 @@ static inline void signal_init(void) save_fp_context = fpu_emulator_save_context; restore_fp_context = fpu_emulator_restore_context; } +#endif } #ifdef CONFIG_MIPS32_COMPAT @@ -1153,6 +1234,20 @@ void __init per_cpu_trap_init(void) { unsigned int cpu = smp_processor_id(); unsigned int status_set = ST0_CU0; +#ifdef CONFIG_MIPS_MT_SMTC + int secondaryTC = 0; + int bootTC = (cpu == 0); + + /* + * Only do per_cpu_trap_init() for first TC of Each VPE. + * Note that this hack assumes that the SMTC init code + * assigns TCs consecutively and in ascending order. + */ + + if (((read_c0_tcbind() & TCBIND_CURTC) != 0) && + ((read_c0_tcbind() & TCBIND_CURVPE) == cpu_data[cpu - 1].vpe_id)) + secondaryTC = 1; +#endif /* CONFIG_MIPS_MT_SMTC */ /* * Disable coprocessors and select 32-bit or 64-bit addressing @@ -1175,6 +1270,10 @@ void __init per_cpu_trap_init(void) write_c0_hwrena (0x0000000f); /* Allow rdhwr to all registers */ #endif +#ifdef CONFIG_MIPS_MT_SMTC + if (!secondaryTC) { +#endif /* CONFIG_MIPS_MT_SMTC */ + /* * Interrupt handling. */ @@ -1191,6 +1290,9 @@ void __init per_cpu_trap_init(void) } else set_c0_cause(CAUSEF_IV); } +#ifdef CONFIG_MIPS_MT_SMTC + } +#endif /* CONFIG_MIPS_MT_SMTC */ cpu_data[cpu].asid_cache = ASID_FIRST_VERSION; TLBMISS_HANDLER_SETUP(); @@ -1200,8 +1302,14 @@ void __init per_cpu_trap_init(void) BUG_ON(current->mm); enter_lazy_tlb(&init_mm, current); - cpu_cache_init(); - tlb_init(); +#ifdef CONFIG_MIPS_MT_SMTC + if (bootTC) { +#endif /* CONFIG_MIPS_MT_SMTC */ + cpu_cache_init(); + tlb_init(); +#ifdef CONFIG_MIPS_MT_SMTC + } +#endif /* CONFIG_MIPS_MT_SMTC */ } /* Install CPU exception handler */ diff --git a/arch/mips/kernel/vmlinux.lds.S b/arch/mips/kernel/vmlinux.lds.S index 2ad0cedf29f..14fa00e3cdf 100644 --- a/arch/mips/kernel/vmlinux.lds.S +++ b/arch/mips/kernel/vmlinux.lds.S @@ -2,7 +2,7 @@ #include #include -#undef mips /* CPP really sucks for this job */ +#undef mips #define mips mips OUTPUT_ARCH(mips) ENTRY(kernel_entry) diff --git a/arch/mips/mips-boards/generic/init.c b/arch/mips/mips-boards/generic/init.c index eab5a705e98..17dfe6a8cab 100644 --- a/arch/mips/mips-boards/generic/init.c +++ b/arch/mips/mips-boards/generic/init.c @@ -220,7 +220,6 @@ void __init kgdb_config (void) generic_putDebugChar (*s++); } - kgdb_enabled = 1; /* Breakpoint is invoked after interrupts are initialised */ } } diff --git a/arch/mips/mips-boards/generic/time.c b/arch/mips/mips-boards/generic/time.c index 93f3bf2c2b2..a9f6124b3a2 100644 --- a/arch/mips/mips-boards/generic/time.c +++ b/arch/mips/mips-boards/generic/time.c @@ -30,6 +30,7 @@ #include #include +#include #include #include #include @@ -50,16 +51,23 @@ unsigned long cpu_khz; static char display_string[] = " LINUX ON ATLAS "; #endif #if defined(CONFIG_MIPS_MALTA) +#if defined(CONFIG_MIPS_MT_SMTC) +static char display_string[] = " SMTC LINUX ON MALTA "; +#else static char display_string[] = " LINUX ON MALTA "; +#endif /* CONFIG_MIPS_MT_SMTC */ #endif #if defined(CONFIG_MIPS_SEAD) static char display_string[] = " LINUX ON SEAD "; #endif -static unsigned int display_count = 0; +static unsigned int display_count; #define MAX_DISPLAY_COUNT (sizeof(display_string) - 8) -static unsigned int timer_tick_count=0; +#define CPUCTR_IMASKBIT (0x100 << MIPSCPU_INT_CPUCTR) + +static unsigned int timer_tick_count; static int mips_cpu_timer_irq; +extern void smtc_timer_broadcast(int); static inline void scroll_display_message(void) { @@ -75,15 +83,55 @@ static void mips_timer_dispatch (struct pt_regs *regs) do_IRQ (mips_cpu_timer_irq, regs); } +/* + * Redeclare until I get around mopping the timer code insanity on MIPS. + */ extern int null_perf_irq(struct pt_regs *regs); extern int (*perf_irq)(struct pt_regs *regs); irqreturn_t mips_timer_interrupt(int irq, void *dev_id, struct pt_regs *regs) { - int r2 = cpu_has_mips_r2; int cpu = smp_processor_id(); + int r2 = cpu_has_mips_r2; + +#ifdef CONFIG_MIPS_MT_SMTC + /* + * In an SMTC system, one Count/Compare set exists per VPE. + * Which TC within a VPE gets the interrupt is essentially + * random - we only know that it shouldn't be one with + * IXMT set. Whichever TC gets the interrupt needs to + * send special interprocessor interrupts to the other + * TCs to make sure that they schedule, etc. + * + * That code is specific to the SMTC kernel, not to + * the a particular platform, so it's invoked from + * the general MIPS timer_interrupt routine. + */ + + /* + * DVPE is necessary so long as cross-VPE interrupts + * are done via read-modify-write of Cause register. + */ + int vpflags = dvpe(); + write_c0_compare (read_c0_count() - 1); + clear_c0_cause(CPUCTR_IMASKBIT); + evpe(vpflags); + + if (cpu_data[cpu].vpe_id == 0) { + timer_interrupt(irq, dev_id, regs); + scroll_display_message(); + } else + write_c0_compare (read_c0_count() + ( mips_hpt_frequency/HZ)); + smtc_timer_broadcast(cpu_data[cpu].vpe_id); + if (cpu != 0) + /* + * Other CPUs should do profiling and process accounting + */ + local_timer_interrupt(irq, dev_id, regs); + +#else /* CONFIG_MIPS_MT_SMTC */ if (cpu == 0) { /* * CPU 0 handles the global timer interrupt job and process @@ -107,12 +155,14 @@ irqreturn_t mips_timer_interrupt(int irq, void *dev_id, struct pt_regs *regs) * More support needs to be added to kernel/time for * counter/timer interrupts on multiple CPU's */ - write_c0_compare (read_c0_count() + (mips_hpt_frequency/HZ)); + write_c0_compare(read_c0_count() + (mips_hpt_frequency/HZ)); + /* - * other CPUs should do profiling and process accounting + * Other CPUs should do profiling and process accounting */ - local_timer_interrupt (irq, dev_id, regs); + local_timer_interrupt(irq, dev_id, regs); } +#endif /* CONFIG_MIPS_MT_SMTC */ out: return IRQ_HANDLED; @@ -126,7 +176,7 @@ static unsigned int __init estimate_cpu_frequency(void) unsigned int prid = read_c0_prid() & 0xffff00; unsigned int count; -#ifdef CONFIG_MIPS_SEAD +#if defined(CONFIG_MIPS_SEAD) || defined(CONFIG_MIPS_SIM) /* * The SEAD board doesn't have a real time clock, so we can't * really calculate the timer frequency @@ -211,7 +261,11 @@ void __init mips_timer_setup(struct irqaction *irq) /* we are using the cpu counter for timer interrupts */ irq->handler = mips_timer_interrupt; /* we use our own handler */ +#ifdef CONFIG_MIPS_MT_SMTC + setup_irq_smtc(mips_cpu_timer_irq, irq, CPUCTR_IMASKBIT); +#else setup_irq(mips_cpu_timer_irq, irq); +#endif /* CONFIG_MIPS_MT_SMTC */ #ifdef CONFIG_SMP /* irq_desc(riptor) is a global resource, when the interrupt overlaps diff --git a/arch/mips/mips-boards/malta/Makefile b/arch/mips/mips-boards/malta/Makefile index fd4c143c0e2..77ee5c6d33c 100644 --- a/arch/mips/mips-boards/malta/Makefile +++ b/arch/mips/mips-boards/malta/Makefile @@ -20,3 +20,4 @@ # obj-y := malta_int.o malta_setup.o +obj-$(CONFIG_SMP) += malta_smp.o diff --git a/arch/mips/mips-boards/malta/malta_int.c b/arch/mips/mips-boards/malta/malta_int.c index 1da8c18b9c8..64db07d4dbe 100644 --- a/arch/mips/mips-boards/malta/malta_int.c +++ b/arch/mips/mips-boards/malta/malta_int.c @@ -118,8 +118,9 @@ static void malta_hw0_irqdispatch(struct pt_regs *regs) int irq; irq = get_int(); - if (irq < 0) + if (irq < 0) { return; /* interrupt has already been cleared */ + } do_IRQ(MALTA_INT_BASE+irq, regs); } @@ -324,9 +325,15 @@ void __init arch_init_irq(void) else if (cpu_has_vint) { set_vi_handler (MIPSCPU_INT_I8259A, malta_hw0_irqdispatch); set_vi_handler (MIPSCPU_INT_COREHI, corehi_irqdispatch); - +#ifdef CONFIG_MIPS_MT_SMTC + setup_irq_smtc (MIPSCPU_INT_BASE+MIPSCPU_INT_I8259A, &i8259irq, + (0x100 << MIPSCPU_INT_I8259A)); + setup_irq_smtc (MIPSCPU_INT_BASE+MIPSCPU_INT_COREHI, + &corehi_irqaction, (0x100 << MIPSCPU_INT_COREHI)); +#else /* Not SMTC */ setup_irq (MIPSCPU_INT_BASE+MIPSCPU_INT_I8259A, &i8259irq); setup_irq (MIPSCPU_INT_BASE+MIPSCPU_INT_COREHI, &corehi_irqaction); +#endif /* CONFIG_MIPS_MT_SMTC */ } else { setup_irq (MIPSCPU_INT_BASE+MIPSCPU_INT_I8259A, &i8259irq); diff --git a/arch/mips/mips-boards/malta/malta_smp.c b/arch/mips/mips-boards/malta/malta_smp.c new file mode 100644 index 00000000000..6c6c8eeedbc --- /dev/null +++ b/arch/mips/mips-boards/malta/malta_smp.c @@ -0,0 +1,128 @@ +/* + * Malta Platform-specific hooks for SMP operation + */ + +#include +#include +#include +#include + +#include +#include +#include +#include +#include +#include +#include +#ifdef CONFIG_MIPS_MT_SMTC +#include +#endif /* CONFIG_MIPS_MT_SMTC */ + +/* VPE/SMP Prototype implements platform interfaces directly */ +#if !defined(CONFIG_MIPS_MT_SMP) + +/* + * Cause the specified action to be performed on a targeted "CPU" + */ + +void core_send_ipi(int cpu, unsigned int action) +{ +/* "CPU" may be TC of same VPE, VPE of same CPU, or different CPU */ +#ifdef CONFIG_MIPS_MT_SMTC + smtc_send_ipi(cpu, LINUX_SMP_IPI, action); +#endif /* CONFIG_MIPS_MT_SMTC */ +} + +/* + * Detect available CPUs/VPEs/TCs and populate phys_cpu_present_map + */ + +void __init prom_build_cpu_map(void) +{ + int nextslot; + + /* + * As of November, 2004, MIPSsim only simulates one core + * at a time. However, that core may be a MIPS MT core + * with multiple virtual processors and thread contexts. + */ + + if (read_c0_config3() & (1<<2)) { + nextslot = mipsmt_build_cpu_map(1); + } +} + +/* + * Platform "CPU" startup hook + */ + +void prom_boot_secondary(int cpu, struct task_struct *idle) +{ +#ifdef CONFIG_MIPS_MT_SMTC + smtc_boot_secondary(cpu, idle); +#endif /* CONFIG_MIPS_MT_SMTC */ +} + +/* + * Post-config but pre-boot cleanup entry point + */ + +void prom_init_secondary(void) +{ +#ifdef CONFIG_MIPS_MT_SMTC + void smtc_init_secondary(void); + int myvpe; + + /* Don't enable Malta I/O interrupts (IP2) for secondary VPEs */ + myvpe = read_c0_tcbind() & TCBIND_CURVPE; + if (myvpe != 0) { + /* Ideally, this should be done only once per VPE, but... */ + clear_c0_status(STATUSF_IP2); + set_c0_status(STATUSF_IP0 | STATUSF_IP1 | STATUSF_IP3 + | STATUSF_IP4 | STATUSF_IP5 | STATUSF_IP6 + | STATUSF_IP7); + } + + smtc_init_secondary(); +#endif /* CONFIG_MIPS_MT_SMTC */ +} + +/* + * Platform SMP pre-initialization + * + * As noted above, we can assume a single CPU for now + * but it may be multithreaded. + */ + +void plat_smp_setup(void) +{ + if (read_c0_config3() & (1<<2)) + mipsmt_build_cpu_map(0); +} + +void __init plat_prepare_cpus(unsigned int max_cpus) +{ + if (read_c0_config3() & (1<<2)) + mipsmt_prepare_cpus(); +} + +/* + * SMP initialization finalization entry point + */ + +void prom_smp_finish(void) +{ +#ifdef CONFIG_MIPS_MT_SMTC + smtc_smp_finish(); +#endif /* CONFIG_MIPS_MT_SMTC */ +} + +/* + * Hook for after all CPUs are online + */ + +void prom_cpus_done(void) +{ +} + +#endif /* CONFIG_MIPS32R2_MT_SMP */ diff --git a/arch/mips/mips-boards/sim/cmdline.c b/arch/mips/mips-boards/sim/cmdline.c deleted file mode 100644 index fef9fbd8e71..00000000000 --- a/arch/mips/mips-boards/sim/cmdline.c +++ /dev/null @@ -1,59 +0,0 @@ -/* - * Carsten Langgaard, carstenl@mips.com - * Copyright (C) 1999,2000 MIPS Technologies, Inc. All rights reserved. - * - * This program is free software; you can distribute it and/or modify it - * under the terms of the GNU General Public License (Version 2) as - * published by the Free Software Foundation. - * - * This program is distributed in the hope it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License - * for more details. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. - * - * Kernel command line creation using the prom monitor (YAMON) argc/argv. - */ -#include -#include - -#include - -extern int prom_argc; -extern int *_prom_argv; - -/* - * YAMON (32-bit PROM) pass arguments and environment as 32-bit pointer. - * This macro take care of sign extension. - */ -#define prom_argv(index) ((char *)(((int *)(int)_prom_argv)[(index)])) - -char arcs_cmdline[CL_SIZE]; - -char * __init prom_getcmdline(void) -{ - return &(arcs_cmdline[0]); -} - - -void __init prom_init_cmdline(void) -{ - char *cp; - int actr; - - actr = 1; /* Always ignore argv[0] */ - - cp = &(arcs_cmdline[0]); - while(actr < prom_argc) { - strcpy(cp, prom_argv(actr)); - cp += strlen(prom_argv(actr)); - *cp++ = ' '; - actr++; - } - if (cp != &(arcs_cmdline[0])) /* get rid of trailing space */ - --cp; - *cp = '\0'; -} diff --git a/arch/mips/mips-boards/sim/sim_cmdline.c b/arch/mips/mips-boards/sim/sim_cmdline.c index 9df37c6fca3..c63021a5dc6 100644 --- a/arch/mips/mips-boards/sim/sim_cmdline.c +++ b/arch/mips/mips-boards/sim/sim_cmdline.c @@ -26,8 +26,10 @@ char * __init prom_getcmdline(void) return arcs_cmdline; } - void __init prom_init_cmdline(void) { - /* nothing to do */ + char *cp; + cp = arcs_cmdline; + /* Get boot line from environment? */ + *cp = '\0'; } diff --git a/arch/mips/mips-boards/sim/sim_smp.c b/arch/mips/mips-boards/sim/sim_smp.c index a9f0c2bfe4a..b7084e7c4bf 100644 --- a/arch/mips/mips-boards/sim/sim_smp.c +++ b/arch/mips/mips-boards/sim/sim_smp.c @@ -44,8 +44,6 @@ void core_send_ipi(int cpu, unsigned int action) { #ifdef CONFIG_MIPS_MT_SMTC - void smtc_send_ipi(int, int, unsigned int); - smtc_send_ipi(cpu, LINUX_SMP_IPI, action); #endif /* CONFIG_MIPS_MT_SMTC */ /* "CPU" may be TC of same VPE, VPE of same CPU, or different CPU */ @@ -59,15 +57,8 @@ void core_send_ipi(int cpu, unsigned int action) void __init prom_build_cpu_map(void) { #ifdef CONFIG_MIPS_MT_SMTC - extern int mipsmt_build_cpu_map(int startslot); int nextslot; - cpus_clear(phys_cpu_present_map); - - /* Register the boot CPU */ - - smp_prepare_boot_cpu(); - /* * As of November, 2004, MIPSsim only simulates one core * at a time. However, that core may be a MIPS MT core @@ -87,8 +78,6 @@ void __init prom_build_cpu_map(void) void prom_boot_secondary(int cpu, struct task_struct *idle) { #ifdef CONFIG_MIPS_MT_SMTC - extern void smtc_boot_secondary(int cpu, struct task_struct *t); - smtc_boot_secondary(cpu, idle); #endif /* CONFIG_MIPS_MT_SMTC */ } @@ -113,7 +102,6 @@ void prom_init_secondary(void) void prom_prepare_cpus(unsigned int max_cpus) { #ifdef CONFIG_MIPS_MT_SMTC - void mipsmt_prepare_cpus(int c); /* * As noted above, we can assume a single CPU for now * but it may be multithreaded. @@ -132,8 +120,6 @@ void prom_prepare_cpus(unsigned int max_cpus) void prom_smp_finish(void) { #ifdef CONFIG_MIPS_MT_SMTC - void smtc_smp_finish(void); - smtc_smp_finish(); #endif /* CONFIG_MIPS_MT_SMTC */ } diff --git a/arch/mips/mm/fault.c b/arch/mips/mm/fault.c index 2d9624fd10e..e3a61722486 100644 --- a/arch/mips/mm/fault.c +++ b/arch/mips/mm/fault.c @@ -157,7 +157,6 @@ no_context: * Oops. The kernel tried to access some bad page. We'll have to * terminate things with extreme prejudice. */ - bust_spinlocks(1); printk(KERN_ALERT "CPU %d Unable to handle kernel paging request at " @@ -188,11 +187,20 @@ do_sigbus: /* Kernel mode? Handle exceptions or die */ if (!user_mode(regs)) goto no_context; - + else /* * Send a sigbus, regardless of whether we were in kernel * or user mode. */ +#if 0 + printk("do_page_fault() #3: sending SIGBUS to %s for " + "invalid %s\n%0*lx (epc == %0*lx, ra == %0*lx)\n", + tsk->comm, + write ? "write access to" : "read access from", + field, address, + field, (unsigned long) regs->cp0_epc, + field, (unsigned long) regs->regs[31]); +#endif tsk->thread.cp0_badvaddr = address; info.si_signo = SIGBUS; info.si_errno = 0; @@ -201,7 +209,6 @@ do_sigbus: force_sig_info(SIGBUS, &info, tsk); return; - vmalloc_fault: { /* diff --git a/arch/mips/mm/tlb-r4k.c b/arch/mips/mm/tlb-r4k.c index a865f2394cb..9dca099ba16 100644 --- a/arch/mips/mm/tlb-r4k.c +++ b/arch/mips/mm/tlb-r4k.c @@ -32,13 +32,35 @@ extern void build_tlb_refill_handler(void); "nop; nop; nop; nop; nop; nop;\n\t" \ ".set reorder\n\t") +/* Atomicity and interruptability */ +#ifdef CONFIG_MIPS_MT_SMTC + +#include +#include + +#define ENTER_CRITICAL(flags) \ + { \ + unsigned int mvpflags; \ + local_irq_save(flags);\ + mvpflags = dvpe() +#define EXIT_CRITICAL(flags) \ + evpe(mvpflags); \ + local_irq_restore(flags); \ + } +#else + +#define ENTER_CRITICAL(flags) local_irq_save(flags) +#define EXIT_CRITICAL(flags) local_irq_restore(flags) + +#endif /* CONFIG_MIPS_MT_SMTC */ + void local_flush_tlb_all(void) { unsigned long flags; unsigned long old_ctx; int entry; - local_irq_save(flags); + ENTER_CRITICAL(flags); /* Save old context and create impossible VPN2 value */ old_ctx = read_c0_entryhi(); write_c0_entrylo0(0); @@ -57,7 +79,7 @@ void local_flush_tlb_all(void) } tlbw_use_hazard(); write_c0_entryhi(old_ctx); - local_irq_restore(flags); + EXIT_CRITICAL(flags); } /* All entries common to a mm share an asid. To effectively flush @@ -87,6 +109,7 @@ void local_flush_tlb_range(struct vm_area_struct *vma, unsigned long start, unsigned long flags; int size; + ENTER_CRITICAL(flags); size = (end - start + (PAGE_SIZE - 1)) >> PAGE_SHIFT; size = (size + 1) >> 1; local_irq_save(flags); @@ -120,7 +143,7 @@ void local_flush_tlb_range(struct vm_area_struct *vma, unsigned long start, } else { drop_mmu_context(mm, cpu); } - local_irq_restore(flags); + EXIT_CRITICAL(flags); } } @@ -129,9 +152,9 @@ void local_flush_tlb_kernel_range(unsigned long start, unsigned long end) unsigned long flags; int size; + ENTER_CRITICAL(flags); size = (end - start + (PAGE_SIZE - 1)) >> PAGE_SHIFT; size = (size + 1) >> 1; - local_irq_save(flags); if (size <= current_cpu_data.tlbsize / 2) { int pid = read_c0_entryhi(); @@ -162,7 +185,7 @@ void local_flush_tlb_kernel_range(unsigned long start, unsigned long end) } else { local_flush_tlb_all(); } - local_irq_restore(flags); + EXIT_CRITICAL(flags); } void local_flush_tlb_page(struct vm_area_struct *vma, unsigned long page) @@ -175,7 +198,7 @@ void local_flush_tlb_page(struct vm_area_struct *vma, unsigned long page) newpid = cpu_asid(cpu, vma->vm_mm); page &= (PAGE_MASK << 1); - local_irq_save(flags); + ENTER_CRITICAL(flags); oldpid = read_c0_entryhi(); write_c0_entryhi(page | newpid); mtc0_tlbw_hazard(); @@ -194,7 +217,7 @@ void local_flush_tlb_page(struct vm_area_struct *vma, unsigned long page) finish: write_c0_entryhi(oldpid); - local_irq_restore(flags); + EXIT_CRITICAL(flags); } } @@ -207,7 +230,7 @@ void local_flush_tlb_one(unsigned long page) unsigned long flags; int oldpid, idx; - local_irq_save(flags); + ENTER_CRITICAL(flags); oldpid = read_c0_entryhi(); page &= (PAGE_MASK << 1); write_c0_entryhi(page); @@ -226,7 +249,7 @@ void local_flush_tlb_one(unsigned long page) } write_c0_entryhi(oldpid); - local_irq_restore(flags); + EXIT_CRITICAL(flags); } /* @@ -249,7 +272,7 @@ void __update_tlb(struct vm_area_struct * vma, unsigned long address, pte_t pte) if (current->active_mm != vma->vm_mm) return; - local_irq_save(flags); + ENTER_CRITICAL(flags); pid = read_c0_entryhi() & ASID_MASK; address &= (PAGE_MASK << 1); @@ -277,7 +300,7 @@ void __update_tlb(struct vm_area_struct * vma, unsigned long address, pte_t pte) else tlb_write_indexed(); tlbw_use_hazard(); - local_irq_restore(flags); + EXIT_CRITICAL(flags); } #if 0 @@ -291,7 +314,7 @@ static void r4k_update_mmu_cache_hwbug(struct vm_area_struct * vma, pte_t *ptep; int idx; - local_irq_save(flags); + ENTER_CRITICAL(flags); address &= (PAGE_MASK << 1); asid = read_c0_entryhi() & ASID_MASK; write_c0_entryhi(address | asid); @@ -310,7 +333,7 @@ static void r4k_update_mmu_cache_hwbug(struct vm_area_struct * vma, else tlb_write_indexed(); tlbw_use_hazard(); - local_irq_restore(flags); + EXIT_CRITICAL(flags); } #endif @@ -322,7 +345,7 @@ void __init add_wired_entry(unsigned long entrylo0, unsigned long entrylo1, unsigned long old_pagemask; unsigned long old_ctx; - local_irq_save(flags); + ENTER_CRITICAL(flags); /* Save old context and create impossible VPN2 value */ old_ctx = read_c0_entryhi(); old_pagemask = read_c0_pagemask(); @@ -342,7 +365,7 @@ void __init add_wired_entry(unsigned long entrylo0, unsigned long entrylo1, BARRIER; write_c0_pagemask(old_pagemask); local_flush_tlb_all(); - local_irq_restore(flags); + EXIT_CRITICAL(flags); } /* @@ -362,7 +385,7 @@ __init int add_temporary_entry(unsigned long entrylo0, unsigned long entrylo1, unsigned long old_pagemask; unsigned long old_ctx; - local_irq_save(flags); + ENTER_CRITICAL(flags); /* Save old context and create impossible VPN2 value */ old_ctx = read_c0_entryhi(); old_pagemask = read_c0_pagemask(); @@ -386,10 +409,11 @@ __init int add_temporary_entry(unsigned long entrylo0, unsigned long entrylo1, write_c0_entryhi(old_ctx); write_c0_pagemask(old_pagemask); out: - local_irq_restore(flags); + EXIT_CRITICAL(flags); return ret; } +extern void __init sanitize_tlb_entries(void); static void __init probe_tlb(unsigned long config) { struct cpuinfo_mips *c = ¤t_cpu_data; @@ -402,6 +426,14 @@ static void __init probe_tlb(unsigned long config) */ if ((c->processor_id & 0xff0000) == PRID_COMP_LEGACY) return; +#ifdef CONFIG_MIPS_MT_SMTC + /* + * If TLB is shared in SMTC system, total size already + * has been calculated and written into cpu_data tlbsize + */ + if((smtc_status & SMTC_TLB_SHARED) == SMTC_TLB_SHARED) + return; +#endif /* CONFIG_MIPS_MT_SMTC */ reg = read_c0_config1(); if (!((config >> 7) & 3)) @@ -410,6 +442,15 @@ static void __init probe_tlb(unsigned long config) c->tlbsize = ((reg >> 25) & 0x3f) + 1; } +static int __initdata ntlb = 0; +static int __init set_ntlb(char *str) +{ + get_option(&str, &ntlb); + return 1; +} + +__setup("ntlb=", set_ntlb); + void __init tlb_init(void) { unsigned int config = read_c0_config(); @@ -432,5 +473,15 @@ void __init tlb_init(void) /* Did I tell you that ARC SUCKS? */ + if (ntlb) { + if (ntlb > 1 && ntlb <= current_cpu_data.tlbsize) { + int wired = current_cpu_data.tlbsize - ntlb; + write_c0_wired(wired); + write_c0_index(wired-1); + printk ("Restricting TLB to %d entries\n", ntlb); + } else + printk("Ignoring invalid argument ntlb=%d\n", ntlb); + } + build_tlb_refill_handler(); } diff --git a/arch/mips/mm/tlbex.c b/arch/mips/mm/tlbex.c index c5eea6ae12c..053dbacac56 100644 --- a/arch/mips/mm/tlbex.c +++ b/arch/mips/mm/tlbex.c @@ -7,6 +7,16 @@ * * Copyright (C) 2004,2005 by Thiemo Seufer * Copyright (C) 2005 Maciej W. Rozycki + * Copyright (C) 2006 Ralf Baechle (ralf@linux-mips.org) + * + * ... and the days got worse and worse and now you see + * I've gone completly out of my mind. + * + * They're coming to take me a away haha + * they're coming to take me a away hoho hihi haha + * to the funny farm where code is beautiful all the time ... + * + * (Condolences to Napoleon XIV) */ #include @@ -68,6 +78,7 @@ enum fields BIMM = 0x040, JIMM = 0x080, FUNC = 0x100, + SET = 0x200 }; #define OP_MASK 0x2f @@ -86,6 +97,8 @@ enum fields #define JIMM_SH 0 #define FUNC_MASK 0x2f #define FUNC_SH 0 +#define SET_MASK 0x7 +#define SET_SH 0 enum opcode { insn_invalid, @@ -129,8 +142,8 @@ static __initdata struct insn insn_table[] = { { insn_bne, M(bne_op,0,0,0,0,0), RS | RT | BIMM }, { insn_daddiu, M(daddiu_op,0,0,0,0,0), RS | RT | SIMM }, { insn_daddu, M(spec_op,0,0,0,0,daddu_op), RS | RT | RD }, - { insn_dmfc0, M(cop0_op,dmfc_op,0,0,0,0), RT | RD }, - { insn_dmtc0, M(cop0_op,dmtc_op,0,0,0,0), RT | RD }, + { insn_dmfc0, M(cop0_op,dmfc_op,0,0,0,0), RT | RD | SET}, + { insn_dmtc0, M(cop0_op,dmtc_op,0,0,0,0), RT | RD | SET}, { insn_dsll, M(spec_op,0,0,0,0,dsll_op), RT | RD | RE }, { insn_dsll32, M(spec_op,0,0,0,0,dsll32_op), RT | RD | RE }, { insn_dsra, M(spec_op,0,0,0,0,dsra_op), RT | RD | RE }, @@ -145,8 +158,8 @@ static __initdata struct insn insn_table[] = { { insn_lld, M(lld_op,0,0,0,0,0), RS | RT | SIMM }, { insn_lui, M(lui_op,0,0,0,0,0), RT | SIMM }, { insn_lw, M(lw_op,0,0,0,0,0), RS | RT | SIMM }, - { insn_mfc0, M(cop0_op,mfc_op,0,0,0,0), RT | RD }, - { insn_mtc0, M(cop0_op,mtc_op,0,0,0,0), RT | RD }, + { insn_mfc0, M(cop0_op,mfc_op,0,0,0,0), RT | RD | SET}, + { insn_mtc0, M(cop0_op,mtc_op,0,0,0,0), RT | RD | SET}, { insn_ori, M(ori_op,0,0,0,0,0), RS | RT | UIMM }, { insn_rfe, M(cop0_op,cop_op,0,0,0,rfe_op), 0 }, { insn_sc, M(sc_op,0,0,0,0,0), RS | RT | SIMM }, @@ -242,6 +255,14 @@ static __init u32 build_func(u32 arg) return arg & FUNC_MASK; } +static __init u32 build_set(u32 arg) +{ + if (arg & ~SET_MASK) + printk(KERN_WARNING "TLB synthesizer field overflow\n"); + + return arg & SET_MASK; +} + /* * The order of opcode arguments is implicitly left to right, * starting with RS and ending with FUNC or IMM. @@ -273,6 +294,7 @@ static void __init build_insn(u32 **buf, enum opcode opc, ...) if (ip->fields & BIMM) op |= build_bimm(va_arg(ap, s32)); if (ip->fields & JIMM) op |= build_jimm(va_arg(ap, u32)); if (ip->fields & FUNC) op |= build_func(va_arg(ap, u32)); + if (ip->fields & SET) op |= build_set(va_arg(ap, u32)); va_end(ap); **buf = op; @@ -358,8 +380,8 @@ I_u1s2(_bgezl); I_u1s2(_bltz); I_u1s2(_bltzl); I_u1u2s3(_bne); -I_u1u2(_dmfc0); -I_u1u2(_dmtc0); +I_u1u2u3(_dmfc0); +I_u1u2u3(_dmtc0); I_u2u1s3(_daddiu); I_u3u1u2(_daddu); I_u2u1u3(_dsll); @@ -376,8 +398,8 @@ I_u2s3u1(_ll); I_u2s3u1(_lld); I_u1s2(_lui); I_u2s3u1(_lw); -I_u1u2(_mfc0); -I_u1u2(_mtc0); +I_u1u2u3(_mfc0); +I_u1u2u3(_mtc0); I_u2u1u3(_ori); I_0(_rfe); I_u2s3u1(_sc); @@ -451,8 +473,8 @@ L_LA(_r3000_write_probe_fail) # define i_SLL(buf, rs, rt, sh) i_dsll(buf, rs, rt, sh) # define i_SRA(buf, rs, rt, sh) i_dsra(buf, rs, rt, sh) # define i_SRL(buf, rs, rt, sh) i_dsrl(buf, rs, rt, sh) -# define i_MFC0(buf, rt, rd) i_dmfc0(buf, rt, rd) -# define i_MTC0(buf, rt, rd) i_dmtc0(buf, rt, rd) +# define i_MFC0(buf, rt, rd...) i_dmfc0(buf, rt, rd) +# define i_MTC0(buf, rt, rd...) i_dmtc0(buf, rt, rd) # define i_ADDIU(buf, rs, rt, val) i_daddiu(buf, rs, rt, val) # define i_ADDU(buf, rs, rt, rd) i_daddu(buf, rs, rt, rd) # define i_SUBU(buf, rs, rt, rd) i_dsubu(buf, rs, rt, rd) @@ -464,8 +486,8 @@ L_LA(_r3000_write_probe_fail) # define i_SLL(buf, rs, rt, sh) i_sll(buf, rs, rt, sh) # define i_SRA(buf, rs, rt, sh) i_sra(buf, rs, rt, sh) # define i_SRL(buf, rs, rt, sh) i_srl(buf, rs, rt, sh) -# define i_MFC0(buf, rt, rd) i_mfc0(buf, rt, rd) -# define i_MTC0(buf, rt, rd) i_mtc0(buf, rt, rd) +# define i_MFC0(buf, rt, rd...) i_mfc0(buf, rt, rd) +# define i_MTC0(buf, rt, rd...) i_mtc0(buf, rt, rd) # define i_ADDIU(buf, rs, rt, val) i_addiu(buf, rs, rt, val) # define i_ADDU(buf, rs, rt, rd) i_addu(buf, rs, rt, rd) # define i_SUBU(buf, rs, rt, rd) i_subu(buf, rs, rt, rd) @@ -670,14 +692,15 @@ static void __init il_bgezl(u32 **p, struct reloc **r, unsigned int reg, #define K1 27 /* Some CP0 registers */ -#define C0_INDEX 0 -#define C0_ENTRYLO0 2 -#define C0_ENTRYLO1 3 -#define C0_CONTEXT 4 -#define C0_BADVADDR 8 -#define C0_ENTRYHI 10 -#define C0_EPC 14 -#define C0_XCONTEXT 20 +#define C0_INDEX 0, 0 +#define C0_ENTRYLO0 2, 0 +#define C0_TCBIND 2, 2 +#define C0_ENTRYLO1 3, 0 +#define C0_CONTEXT 4, 0 +#define C0_BADVADDR 8, 0 +#define C0_ENTRYHI 10, 0 +#define C0_EPC 14, 0 +#define C0_XCONTEXT 20, 0 #ifdef CONFIG_64BIT # define GET_CONTEXT(buf, reg) i_MFC0(buf, reg, C0_XCONTEXT) @@ -951,12 +974,20 @@ build_get_pmde64(u32 **p, struct label **l, struct reloc **r, /* No i_nop needed here, since the next insn doesn't touch TMP. */ #ifdef CONFIG_SMP +# ifdef CONFIG_MIPS_MT_SMTC + /* + * SMTC uses TCBind value as "CPU" index + */ + i_mfc0(p, ptr, C0_TCBIND); + i_dsrl(p, ptr, ptr, 19); +# else /* * 64 bit SMP running in XKPHYS has smp_processor_id() << 3 * stored in CONTEXT. */ i_dmfc0(p, ptr, C0_CONTEXT); i_dsrl(p, ptr, ptr, 23); +#endif i_LA_mostly(p, tmp, pgdc); i_daddu(p, ptr, ptr, tmp); i_dmfc0(p, tmp, C0_BADVADDR); @@ -1014,9 +1045,21 @@ build_get_pgde32(u32 **p, unsigned int tmp, unsigned int ptr) /* 32 bit SMP has smp_processor_id() stored in CONTEXT. */ #ifdef CONFIG_SMP +#ifdef CONFIG_MIPS_MT_SMTC + /* + * SMTC uses TCBind value as "CPU" index + */ + i_mfc0(p, ptr, C0_TCBIND); + i_LA_mostly(p, tmp, pgdc); + i_srl(p, ptr, ptr, 19); +#else + /* + * smp_processor_id() << 3 is stored in CONTEXT. + */ i_mfc0(p, ptr, C0_CONTEXT); i_LA_mostly(p, tmp, pgdc); i_srl(p, ptr, ptr, 23); +#endif i_addu(p, ptr, tmp, ptr); #else i_LA_mostly(p, ptr, pgdc); -- cgit v1.2.3 From f088fc84f94c1a36943e28ad704a9a740a35f877 Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Wed, 5 Apr 2006 09:45:47 +0100 Subject: [MIPS] FPU affinity for MT ASE. Signed-off-by: Ralf Baechle --- arch/mips/Kconfig | 5 +++++ arch/mips/kernel/process.c | 11 +++++++++++ arch/mips/kernel/scall32-o32.S | 11 +++++++++++ arch/mips/kernel/setup.c | 5 ++++- arch/mips/kernel/smp-mt.c | 11 +++++++++++ arch/mips/kernel/traps.c | 30 ++++++++++++++++++++++++++++++ 6 files changed, 72 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig index f9be549645e..87f0b79c6b1 100644 --- a/arch/mips/Kconfig +++ b/arch/mips/Kconfig @@ -1464,6 +1464,11 @@ config MIPS_VPE_LOADER endchoice +config MIPS_MT_FPAFF + bool "Dynamic FPU affinity for FP-intensive threads" + depends on MIPS_MT + default y + config MIPS_VPE_LOADER_TOM bool "Load VPE program into memory hidden from linux" depends on MIPS_VPE_LOADER diff --git a/arch/mips/kernel/process.c b/arch/mips/kernel/process.c index 8b393df460a..199a06e873c 100644 --- a/arch/mips/kernel/process.c +++ b/arch/mips/kernel/process.c @@ -185,6 +185,17 @@ int copy_thread(int nr, unsigned long clone_flags, unsigned long usp, childregs->cp0_status &= ~(ST0_CU2|ST0_CU1); clear_tsk_thread_flag(p, TIF_USEDFPU); +#ifdef CONFIG_MIPS_MT_FPAFF + /* + * FPU affinity support is cleaner if we track the + * user-visible CPU affinity from the very beginning. + * The generic cpus_allowed mask will already have + * been copied from the parent before copy_thread + * is invoked. + */ + p->thread.user_cpus_allowed = p->cpus_allowed; +#endif /* CONFIG_MIPS_MT_FPAFF */ + if (clone_flags & CLONE_SETTLS) ti->tp_value = regs->regs[7]; diff --git a/arch/mips/kernel/scall32-o32.S b/arch/mips/kernel/scall32-o32.S index 4e36b87be1e..a0ac0e5f61a 100644 --- a/arch/mips/kernel/scall32-o32.S +++ b/arch/mips/kernel/scall32-o32.S @@ -569,8 +569,19 @@ einval: li v0, -EINVAL sys sys_tkill 2 sys sys_sendfile64 5 sys sys_futex 6 +#ifdef CONFIG_MIPS_MT_FPAFF + /* + * For FPU affinity scheduling on MIPS MT processors, we need to + * intercept sys_sched_xxxaffinity() calls until we get a proper hook + * in kernel/sched.c. Considered only temporary we only support these + * hooks for the 32-bit kernel - there is no MIPS64 MT processor atm. + */ + sys mipsmt_sys_sched_setaffinity 3 + sys mipsmt_sys_sched_getaffinity 3 +#else sys sys_sched_setaffinity 3 sys sys_sched_getaffinity 3 /* 4240 */ +#endif /* CONFIG_MIPS_MT_FPAFF */ sys sys_io_setup 2 sys sys_io_destroy 1 sys sys_io_getevents 5 diff --git a/arch/mips/kernel/setup.c b/arch/mips/kernel/setup.c index dcbfd27071f..bcf1b10e518 100644 --- a/arch/mips/kernel/setup.c +++ b/arch/mips/kernel/setup.c @@ -529,7 +529,10 @@ void __init setup_arch(char **cmdline_p) int __init fpu_disable(char *s) { - cpu_data[0].options &= ~MIPS_CPU_FPU; + int i; + + for (i = 0; i < NR_CPUS; i++) + cpu_data[i].options &= ~MIPS_CPU_FPU; return 1; } diff --git a/arch/mips/kernel/smp-mt.c b/arch/mips/kernel/smp-mt.c index 19b8e4b31b7..57770902b9a 100644 --- a/arch/mips/kernel/smp-mt.c +++ b/arch/mips/kernel/smp-mt.c @@ -150,6 +150,11 @@ void plat_smp_setup(void) unsigned long val; int i, num; +#ifdef CONFIG_MIPS_MT_FPAFF + /* If we have an FPU, enroll ourselves in the FPU-full mask */ + if (cpu_has_fpu) + cpu_set(0, mt_fpu_cpumask); +#endif /* CONFIG_MIPS_MT_FPAFF */ if (!cpu_has_mipsmt) return; @@ -312,6 +317,12 @@ void prom_smp_finish(void) { write_c0_compare(read_c0_count() + (8* mips_hpt_frequency/HZ)); +#ifdef CONFIG_MIPS_MT_FPAFF + /* If we have an FPU, enroll ourselves in the FPU-full mask */ + if (cpu_has_fpu) + cpu_set(smp_processor_id(), mt_fpu_cpumask); +#endif /* CONFIG_MIPS_MT_FPAFF */ + local_irq_enable(); } diff --git a/arch/mips/kernel/traps.c b/arch/mips/kernel/traps.c index 6336fe8008e..e9902d89dc0 100644 --- a/arch/mips/kernel/traps.c +++ b/arch/mips/kernel/traps.c @@ -758,6 +758,36 @@ asmlinkage void do_cpu(struct pt_regs *regs) ¤t->thread.fpu.soft); if (sig) force_sig(sig, current); +#ifdef CONFIG_MIPS_MT_FPAFF + else { + /* + * MIPS MT processors may have fewer FPU contexts + * than CPU threads. If we've emulated more than + * some threshold number of instructions, force + * migration to a "CPU" that has FP support. + */ + if(mt_fpemul_threshold > 0 + && ((current->thread.emulated_fp++ + > mt_fpemul_threshold))) { + /* + * If there's no FPU present, or if the + * application has already restricted + * the allowed set to exclude any CPUs + * with FPUs, we'll skip the procedure. + */ + if (cpus_intersects(current->cpus_allowed, + mt_fpu_cpumask)) { + cpumask_t tmask; + + cpus_and(tmask, + current->thread.user_cpus_allowed, + mt_fpu_cpumask); + set_cpus_allowed(current, tmask); + current->thread.mflags |= MF_FPUBOUND; + } + } + } +#endif /* CONFIG_MIPS_MT_FPAFF */ } return; -- cgit v1.2.3 From 8f6539d55919b8e013583df768312a2503f4125d Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Wed, 5 Apr 2006 09:45:48 +0100 Subject: [MIPS] kgdb: Let gcc compute the array size itself. This is the same method as used in the serial driver. Signed-off-by: Ralf Baechle --- arch/mips/mips-boards/generic/gdb_hook.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/mips/mips-boards/generic/gdb_hook.c b/arch/mips/mips-boards/generic/gdb_hook.c index 91a2ccbe373..6a1854de457 100644 --- a/arch/mips/mips-boards/generic/gdb_hook.c +++ b/arch/mips/mips-boards/generic/gdb_hook.c @@ -25,7 +25,7 @@ #include #include -static struct serial_state rs_table[RS_TABLE_SIZE] = { +static struct serial_state rs_table[] = { SERIAL_PORT_DFNS /* Defined in serial.h */ }; -- cgit v1.2.3 From bb12d612d4b2e6dc260fab081f69df783b74289f Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Wed, 5 Apr 2006 09:45:49 +0100 Subject: [MIPS] Make mips_srs_init static. Nothing outside traps.c uses it. Signed-off-by: Ralf Baechle --- arch/mips/kernel/traps.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/mips/kernel/traps.c b/arch/mips/kernel/traps.c index e9902d89dc0..4901f0a37fc 100644 --- a/arch/mips/kernel/traps.c +++ b/arch/mips/kernel/traps.c @@ -1052,7 +1052,7 @@ static struct shadow_registers { unsigned long sr_allocated; } shadow_registers; -void mips_srs_init(void) +static void mips_srs_init(void) { #ifdef CONFIG_CPU_MIPSR2_SRS shadow_registers.sr_supported = ((read_c0_srsctl() >> 26) & 0x0f) + 1; -- cgit v1.2.3 From 7e3bfc7cfc402458b0386086ab650ce811720927 Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Wed, 5 Apr 2006 20:42:04 +0100 Subject: [MIPS] Handle IDE PIO cache aliases on SMP. Signed-off-by: Ralf Baechle --- arch/mips/mm/c-r3k.c | 5 +++++ arch/mips/mm/c-r4k.c | 1 + arch/mips/mm/c-sb1.c | 1 + arch/mips/mm/c-tx39.c | 7 +++++++ arch/mips/mm/cache.c | 1 + 5 files changed, 15 insertions(+) (limited to 'arch') diff --git a/arch/mips/mm/c-r3k.c b/arch/mips/mm/c-r3k.c index 9dd1352d574..bb041a22f20 100644 --- a/arch/mips/mm/c-r3k.c +++ b/arch/mips/mm/c-r3k.c @@ -260,6 +260,10 @@ static void r3k_flush_cache_page(struct vm_area_struct *vma, unsigned long page, { } +static void local_r3k_flush_data_cache_page(unsigned long addr) +{ +} + static void r3k_flush_data_cache_page(unsigned long addr) { } @@ -335,6 +339,7 @@ void __init r3k_cache_init(void) flush_icache_range = r3k_flush_icache_range; flush_cache_sigtramp = r3k_flush_cache_sigtramp; + local_flush_data_cache_page = local_r3k_flush_data_cache_page; flush_data_cache_page = r3k_flush_data_cache_page; _dma_cache_wback_inv = r3k_dma_cache_wback_inv; diff --git a/arch/mips/mm/c-r4k.c b/arch/mips/mm/c-r4k.c index c4c208449d8..d88c6686413 100644 --- a/arch/mips/mm/c-r4k.c +++ b/arch/mips/mm/c-r4k.c @@ -1199,6 +1199,7 @@ void __init r4k_cache_init(void) flush_cache_sigtramp = r4k_flush_cache_sigtramp; flush_icache_all = r4k_flush_icache_all; + local_flush_data_cache_page = local_r4k_flush_data_cache_page; flush_data_cache_page = r4k_flush_data_cache_page; flush_icache_range = r4k_flush_icache_range; diff --git a/arch/mips/mm/c-sb1.c b/arch/mips/mm/c-sb1.c index 2f08b535f20..f9b129491b1 100644 --- a/arch/mips/mm/c-sb1.c +++ b/arch/mips/mm/c-sb1.c @@ -528,6 +528,7 @@ void sb1_cache_init(void) flush_cache_page = sb1_flush_cache_page; flush_cache_sigtramp = sb1_flush_cache_sigtramp; + local_flush_data_cache_page = (void *) sb1_nop; flush_data_cache_page = (void *) sb1_nop; /* Full flush */ diff --git a/arch/mips/mm/c-tx39.c b/arch/mips/mm/c-tx39.c index fe232e3988e..5dfc9b1901f 100644 --- a/arch/mips/mm/c-tx39.c +++ b/arch/mips/mm/c-tx39.c @@ -216,6 +216,11 @@ static void tx39_flush_cache_page(struct vm_area_struct *vma, unsigned long page tx39_blast_icache_page_indexed(page); } +static void local_tx39_flush_data_cache_page(void * addr) +{ + tx39_blast_dcache_page(addr); +} + static void tx39_flush_data_cache_page(unsigned long addr) { tx39_blast_dcache_page(addr); @@ -381,6 +386,7 @@ void __init tx39_cache_init(void) flush_icache_range = (void *) tx39h_flush_icache_all; flush_cache_sigtramp = (void *) tx39h_flush_icache_all; + local_flush_data_cache_page = (void *) tx39h_flush_icache_all; flush_data_cache_page = (void *) tx39h_flush_icache_all; _dma_cache_wback_inv = tx39h_dma_cache_wback_inv; @@ -406,6 +412,7 @@ void __init tx39_cache_init(void) flush_icache_range = tx39_flush_icache_range; flush_cache_sigtramp = tx39_flush_cache_sigtramp; + local_flush_data_cache_page = local_tx39_flush_data_cache_page; flush_data_cache_page = tx39_flush_data_cache_page; _dma_cache_wback_inv = tx39_dma_cache_wback_inv; diff --git a/arch/mips/mm/cache.c b/arch/mips/mm/cache.c index 591c22b080e..83a56296be8 100644 --- a/arch/mips/mm/cache.c +++ b/arch/mips/mm/cache.c @@ -30,6 +30,7 @@ void (*flush_icache_page)(struct vm_area_struct *vma, struct page *page); /* MIPS specific cache operations */ void (*flush_cache_sigtramp)(unsigned long addr); +void (*local_flush_data_cache_page)(void * addr); void (*flush_data_cache_page)(unsigned long addr); void (*flush_icache_all)(void); -- cgit v1.2.3 From 9200c0b2a07c430bd98c546fc44b94f50e67ac62 Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Thu, 6 Apr 2006 00:44:25 +0100 Subject: [MIPS] Fix Makefile bugs for MIPS32/MIPS64 R1 and R2. This fixes kernel builds with gcc 3.2 (not 64-bit, that is looking like it is beyond recovery) and 3.3. With these bugs fixed we now also can get undo 3b4c4996a0c24da9e6f8be764e3950b756b18cc0 and similar bits for SMTC that were added in 79cc8007b93838a670b164b8a55ab3e735a12a8b. Signed-off-by: Ralf Baechle --- arch/mips/Makefile | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) (limited to 'arch') diff --git a/arch/mips/Makefile b/arch/mips/Makefile index 5d10758356a..69b9c1b8faf 100644 --- a/arch/mips/Makefile +++ b/arch/mips/Makefile @@ -105,13 +105,13 @@ cflags-$(CONFIG_CPU_R4300) += -march=r4300 -Wa,--trap cflags-$(CONFIG_CPU_VR41XX) += -march=r4100 -Wa,--trap cflags-$(CONFIG_CPU_R4X00) += -march=r4600 -Wa,--trap cflags-$(CONFIG_CPU_TX49XX) += -march=r4600 -Wa,--trap -cflags-$(CONFIG_CPU_MIPS32_R1) += $(call cc-option,-march=mips32,-mips2 -mtune=r4600) \ +cflags-$(CONFIG_CPU_MIPS32_R1) += $(call cc-option,-march=mips32,-mips32 -U_MIPS_ISA -D_MIPS_ISA=_MIPS_ISA_MIPS32) \ -Wa,-mips32 -Wa,--trap -cflags-$(CONFIG_CPU_MIPS32_R2) += $(call cc-option,-march=mips32r2,-mips2 -mtune=r4600) \ +cflags-$(CONFIG_CPU_MIPS32_R2) += $(call cc-option,-march=mips32r2,-mips32r2 -U_MIPS_ISA -D_MIPS_ISA=_MIPS_ISA_MIPS32) \ -Wa,-mips32r2 -Wa,--trap -cflags-$(CONFIG_CPU_MIPS64_R1) += $(call cc-option,-march=mips64,-mips2 -mtune=r4600) \ +cflags-$(CONFIG_CPU_MIPS64_R1) += $(call cc-option,-march=mips64,-mips64 -U_MIPS_ISA -D_MIPS_ISA=_MIPS_ISA_MIPS64) \ -Wa,-mips64 -Wa,--trap -cflags-$(CONFIG_CPU_MIPS64_R2) += $(call cc-option,-march=mips64r2,-mips2 -mtune=r4600 ) \ +cflags-$(CONFIG_CPU_MIPS64_R2) += $(call cc-option,-march=mips64r2,-mips64r2 -U_MIPS_ISA -D_MIPS_ISA=_MIPS_ISA_MIPS64) \ -Wa,-mips64r2 -Wa,--trap cflags-$(CONFIG_CPU_R5000) += -march=r5000 -Wa,--trap cflags-$(CONFIG_CPU_R5432) += $(call cc-option,-march=r5400,-march=r5000) \ -- cgit v1.2.3 From 3c68da798a3facbf94d536b1ed7ff6f1e7f4ad8d Mon Sep 17 00:00:00 2001 From: Atsushi Nemoto Date: Sat, 8 Apr 2006 01:33:31 +0900 Subject: [MIPS] Use __ffs() instead of ffs() for waybit calculation. Signed-off-by: Atsushi Nemoto Signed-off-by: Ralf Baechle --- arch/mips/mm/c-r4k.c | 16 ++++++++-------- arch/mips/mm/sc-rm7k.c | 2 +- 2 files changed, 9 insertions(+), 9 deletions(-) (limited to 'arch') diff --git a/arch/mips/mm/c-r4k.c b/arch/mips/mm/c-r4k.c index d88c6686413..4182e1176fa 100644 --- a/arch/mips/mm/c-r4k.c +++ b/arch/mips/mm/c-r4k.c @@ -750,12 +750,12 @@ static void __init probe_pcache(void) icache_size = 1 << (12 + ((config & CONF_IC) >> 9)); c->icache.linesz = 16 << ((config & CONF_IB) >> 5); c->icache.ways = 2; - c->icache.waybit = ffs(icache_size/2) - 1; + c->icache.waybit = __ffs(icache_size/2); dcache_size = 1 << (12 + ((config & CONF_DC) >> 6)); c->dcache.linesz = 16 << ((config & CONF_DB) >> 4); c->dcache.ways = 2; - c->dcache.waybit= ffs(dcache_size/2) - 1; + c->dcache.waybit= __ffs(dcache_size/2); c->options |= MIPS_CPU_CACHE_CDEX_P; break; @@ -838,12 +838,12 @@ static void __init probe_pcache(void) icache_size = 1 << (10 + ((config & CONF_IC) >> 9)); c->icache.linesz = 16 << ((config & CONF_IB) >> 5); c->icache.ways = 2; - c->icache.waybit = ffs(icache_size/2) - 1; + c->icache.waybit = __ffs(icache_size/2); dcache_size = 1 << (10 + ((config & CONF_DC) >> 6)); c->dcache.linesz = 16 << ((config & CONF_DB) >> 4); c->dcache.ways = 2; - c->dcache.waybit = ffs(dcache_size/2) - 1; + c->dcache.waybit = __ffs(dcache_size/2); c->options |= MIPS_CPU_CACHE_CDEX_P; break; @@ -874,12 +874,12 @@ static void __init probe_pcache(void) icache_size = 1 << (12 + ((config & CONF_IC) >> 9)); c->icache.linesz = 16 << ((config & CONF_IB) >> 5); c->icache.ways = 4; - c->icache.waybit = ffs(icache_size / c->icache.ways) - 1; + c->icache.waybit = __ffs(icache_size / c->icache.ways); dcache_size = 1 << (12 + ((config & CONF_DC) >> 6)); c->dcache.linesz = 16 << ((config & CONF_DB) >> 4); c->dcache.ways = 4; - c->dcache.waybit = ffs(dcache_size / c->dcache.ways) - 1; + c->dcache.waybit = __ffs(dcache_size / c->dcache.ways); #if !defined(CONFIG_SMP) || !defined(RM9000_CDEX_SMP_WAR) c->options |= MIPS_CPU_CACHE_CDEX_P; @@ -907,7 +907,7 @@ static void __init probe_pcache(void) icache_size = c->icache.sets * c->icache.ways * c->icache.linesz; - c->icache.waybit = ffs(icache_size/c->icache.ways) - 1; + c->icache.waybit = __ffs(icache_size/c->icache.ways); if (config & 0x8) /* VI bit */ c->icache.flags |= MIPS_CACHE_VTAG; @@ -927,7 +927,7 @@ static void __init probe_pcache(void) dcache_size = c->dcache.sets * c->dcache.ways * c->dcache.linesz; - c->dcache.waybit = ffs(dcache_size/c->dcache.ways) - 1; + c->dcache.waybit = __ffs(dcache_size/c->dcache.ways); c->options |= MIPS_CPU_PREFETCH; break; diff --git a/arch/mips/mm/sc-rm7k.c b/arch/mips/mm/sc-rm7k.c index 3b6cc9ba1b0..31ec7305242 100644 --- a/arch/mips/mm/sc-rm7k.c +++ b/arch/mips/mm/sc-rm7k.c @@ -138,7 +138,7 @@ void __init rm7k_sc_init(void) c->scache.linesz = sc_lsize; c->scache.ways = 4; - c->scache.waybit= ffs(scache_size / c->scache.ways) - 1; + c->scache.waybit= __ffs(scache_size / c->scache.ways); c->scache.waysize = scache_size / c->scache.ways; c->scache.sets = scache_size / (c->scache.linesz * c->scache.ways); printk(KERN_INFO "Secondary cache size %dK, linesize %d bytes.\n", -- cgit v1.2.3