From b6392bd5b11d694a5d563d2ad1d88137d2cde036 Mon Sep 17 00:00:00 2001 From: Janusz Krzysztofik Date: Mon, 30 Apr 2012 19:26:09 +0200 Subject: ARM: OMAP1: Amstrad Delta: Fix wrong IRQ base in FIQ handler Commit 384ebe1c2849160d040df3e68634ec506f13d9ff, "gpio/omap: Add DT support to GPIO driver", introduced dynamic IRQ numbering of OMAP GPIO interrupts, breaking all IH_GPIO_BASE based IRQ number calculations. This issue was corrected in the OMAP GPIO driver and the related header file with commit 25db711df3258d125dc1209800317e5c0ef3c870, "gpio/omap: Fix IRQ handling for SPARSE_IRQ". However, the Amstrad Delta FIQ handler, which replaces the gpio-omap driver in serving GPIO interrupts on this board, still uses that outdated method. Fix it. Signed-off-by: Janusz Krzysztofik Signed-off-by: Tony Lindgren --- arch/arm/mach-omap1/ams-delta-fiq.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/mach-omap1/ams-delta-fiq.c b/arch/arm/mach-omap1/ams-delta-fiq.c index fcce7ff3763..cfd98b186fc 100644 --- a/arch/arm/mach-omap1/ams-delta-fiq.c +++ b/arch/arm/mach-omap1/ams-delta-fiq.c @@ -48,7 +48,7 @@ static irqreturn_t deferred_fiq(int irq, void *dev_id) struct irq_chip *irq_chip = NULL; int gpio, irq_num, fiq_count; - irq_desc = irq_to_desc(IH_GPIO_BASE); + irq_desc = irq_to_desc(gpio_to_irq(AMS_DELTA_GPIO_PIN_KEYBRD_CLK)); if (irq_desc) irq_chip = irq_desc->irq_data.chip; -- cgit v1.2.3 From 08ca7444f589bedf9ad5d82883e5d0754852d73b Mon Sep 17 00:00:00 2001 From: Archit Taneja Date: Thu, 19 Apr 2012 17:39:16 +0530 Subject: ARM: OMAP: Revert "ARM: OMAP: ctrl: Fix CONTROL_DSIPHY register fields" This reverts commit 46f8c3c7e95c0d30d95911e7975ddc4f93b3e237. The commit above swapped the DSI1_PPID and DSI2_PPID register fields in CONTROL_DSIPHY to be in sync with the newer public OMAP TRMs(after version V). With this commit, contention errors were reported on DSI lanes some OMAP4 SDPs. After probing the DSI lanes on OMAP4 SDP, it was seen that setting bits in the DSI2_PPID field was pulling up voltage on DSI1 lanes, and DSI1_PPID field was pulling up voltage on DSI2 lanes. This proves that the current version of OMAP4 TRM is incorrect, swap the position of register fields according to the older TRM versions as they were correct. Cc: stable@vger.kernel.org # v3.2+ Acked-by: Tomi Valkeinen Signed-off-by: Archit Taneja Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/include/mach/ctrl_module_pad_core_44xx.h | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-omap2/include/mach/ctrl_module_pad_core_44xx.h b/arch/arm/mach-omap2/include/mach/ctrl_module_pad_core_44xx.h index 1e2d3322f33..c88420de115 100644 --- a/arch/arm/mach-omap2/include/mach/ctrl_module_pad_core_44xx.h +++ b/arch/arm/mach-omap2/include/mach/ctrl_module_pad_core_44xx.h @@ -941,10 +941,10 @@ #define OMAP4_DSI2_LANEENABLE_MASK (0x7 << 29) #define OMAP4_DSI1_LANEENABLE_SHIFT 24 #define OMAP4_DSI1_LANEENABLE_MASK (0x1f << 24) -#define OMAP4_DSI2_PIPD_SHIFT 19 -#define OMAP4_DSI2_PIPD_MASK (0x1f << 19) -#define OMAP4_DSI1_PIPD_SHIFT 14 -#define OMAP4_DSI1_PIPD_MASK (0x1f << 14) +#define OMAP4_DSI1_PIPD_SHIFT 19 +#define OMAP4_DSI1_PIPD_MASK (0x1f << 19) +#define OMAP4_DSI2_PIPD_SHIFT 14 +#define OMAP4_DSI2_PIPD_MASK (0x1f << 14) /* CONTROL_MCBSPLP */ #define OMAP4_ALBCTRLRX_FSX_SHIFT 31 -- cgit v1.2.3 From 1a21932edc10de0dfd843797427719e5da43355b Mon Sep 17 00:00:00 2001 From: Enrico Butera Date: Wed, 9 May 2012 11:27:59 +0200 Subject: ARM: OMAP: igep0020: fix smsc911x dummy regulator id id 0 is already used and causes errors at boot: WARNING: at fs/sysfs/dir.c:508 sysfs_add_one+0x9c/0xac() sysfs: cannot create duplicate filename '/devices/platform/reg-fixed-voltage.0' Fix it by using the next available one (id=1). This was caused by 5b3689f4 (ARM: OMAP2+: smsc911x: Add fixed board regulators) that did not account for some regulators already being used. Signed-off-by: Enrico Butera [tony@atomide.com: updated comments for regression causing commit] Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/board-igep0020.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/mach-omap2/board-igep0020.c b/arch/arm/mach-omap2/board-igep0020.c index 930c0d38043..740cee9369b 100644 --- a/arch/arm/mach-omap2/board-igep0020.c +++ b/arch/arm/mach-omap2/board-igep0020.c @@ -641,7 +641,7 @@ static struct regulator_consumer_supply dummy_supplies[] = { static void __init igep_init(void) { - regulator_register_fixed(0, dummy_supplies, ARRAY_SIZE(dummy_supplies)); + regulator_register_fixed(1, dummy_supplies, ARRAY_SIZE(dummy_supplies)); omap3_mux_init(board_mux, OMAP_PACKAGE_CBB); /* Get IGEP2 hardware revision */ -- cgit v1.2.3