From 0bac660a77b672f85d713d1898382993299df5de Mon Sep 17 00:00:00 2001 From: Dominik Brodowski Date: Tue, 29 Jul 2008 08:43:20 +0200 Subject: pcmcia: use pcmcia_loop_config in pata and ide drivers Use the config loop helper in pata_pcmcia and ide_cs CC: Tejun Heo CC: Alan Cox CC: linux-ide@vger.kernel.org Signed-off-by: Dominik Brodowski --- drivers/ata/pata_pcmcia.c | 171 ++++++++++++++++++++++------------------------ 1 file changed, 80 insertions(+), 91 deletions(-) (limited to 'drivers/ata/pata_pcmcia.c') diff --git a/drivers/ata/pata_pcmcia.c b/drivers/ata/pata_pcmcia.c index 41b4361bbf6..8cccd1b81ee 100644 --- a/drivers/ata/pata_pcmcia.c +++ b/drivers/ata/pata_pcmcia.c @@ -148,6 +148,69 @@ static struct ata_port_operations pcmcia_8bit_port_ops = { #define CS_CHECK(fn, ret) \ do { last_fn = (fn); if ((last_ret = (ret)) != 0) goto cs_failed; } while (0) + +struct pcmcia_config_check { + config_info_t conf; + cistpl_cftable_entry_t dflt; + unsigned long ctl_base; + int skip_vcc; + int is_kme; +}; + +static int pcmcia_check_one_config(struct pcmcia_device *pdev, + cistpl_cftable_entry_t *cfg, + void *priv_data) +{ + struct pcmcia_config_check *stk = priv_data; + + /* Check for matching Vcc, unless we're desperate */ + if (!stk->skip_vcc) { + if (cfg->vcc.present & (1 << CISTPL_POWER_VNOM)) { + if (stk->conf.Vcc != cfg->vcc.param[CISTPL_POWER_VNOM] / 10000) + goto next_entry; + } else if (stk->dflt.vcc.present & (1 << CISTPL_POWER_VNOM)) { + if (stk->conf.Vcc != stk->dflt.vcc.param[CISTPL_POWER_VNOM] / 10000) + goto next_entry; + } + } + + if (cfg->vpp1.present & (1 << CISTPL_POWER_VNOM)) + pdev->conf.Vpp = cfg->vpp1.param[CISTPL_POWER_VNOM] / 10000; + else if (stk->dflt.vpp1.present & (1 << CISTPL_POWER_VNOM)) + pdev->conf.Vpp = stk->dflt.vpp1.param[CISTPL_POWER_VNOM] / 10000; + + if ((cfg->io.nwin > 0) || (stk->dflt.io.nwin > 0)) { + cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &stk->dflt.io; + pdev->conf.ConfigIndex = cfg->index; + pdev->io.BasePort1 = io->win[0].base; + pdev->io.IOAddrLines = io->flags & CISTPL_IO_LINES_MASK; + if (!(io->flags & CISTPL_IO_16BIT)) + pdev->io.Attributes1 = IO_DATA_PATH_WIDTH_8; + if (io->nwin == 2) { + pdev->io.NumPorts1 = 8; + pdev->io.BasePort2 = io->win[1].base; + pdev->io.NumPorts2 = (stk->is_kme) ? 2 : 1; + if (pcmcia_request_io(pdev, &pdev->io) != 0) + goto next_entry; + stk->ctl_base = pdev->io.BasePort2; + } else if ((io->nwin == 1) && (io->win[0].len >= 16)) { + pdev->io.NumPorts1 = io->win[0].len; + pdev->io.NumPorts2 = 0; + if (pcmcia_request_io(pdev, &pdev->io) != 0) + goto next_entry; + stk->ctl_base = pdev->io.BasePort1 + 0x0e; + } else + goto next_entry; + /* If we've got this far, we're done */ + return 0; + } +next_entry: + if (cfg->flags & CISTPL_CFTABLE_DEFAULT) + memcpy(&stk->dflt, cfg, sizeof(stk->dflt)); + + return -ENODEV; +} + /** * pcmcia_init_one - attach a PCMCIA interface * @pdev: pcmcia device @@ -161,19 +224,11 @@ static int pcmcia_init_one(struct pcmcia_device *pdev) struct ata_host *host; struct ata_port *ap; struct ata_pcmcia_info *info; - tuple_t tuple; - struct { - unsigned short buf[128]; - cisparse_t parse; - config_info_t conf; - cistpl_cftable_entry_t dflt; - } *stk = NULL; - cistpl_cftable_entry_t *cfg; - int pass, last_ret = 0, last_fn = 0, is_kme = 0, ret = -ENOMEM, p; + struct pcmcia_config_check *stk = NULL; + int last_ret = 0, last_fn = 0, is_kme = 0, ret = -ENOMEM, p; unsigned long io_base, ctl_base; void __iomem *io_addr, *ctl_addr; int n_ports = 1; - struct ata_port_operations *ops = &pcmcia_port_ops; info = kzalloc(sizeof(*info), GFP_KERNEL); @@ -193,96 +248,30 @@ static int pcmcia_init_one(struct pcmcia_device *pdev) pdev->conf.Attributes = CONF_ENABLE_IRQ; pdev->conf.IntType = INT_MEMORY_AND_IO; - /* Allocate resoure probing structures */ - - stk = kzalloc(sizeof(*stk), GFP_KERNEL); - if (!stk) - goto out1; - - cfg = &stk->parse.cftable_entry; - - /* Tuples we are walking */ - tuple.TupleData = (cisdata_t *)&stk->buf; - tuple.TupleOffset = 0; - tuple.TupleDataMax = 255; - tuple.Attributes = 0; - /* See if we have a manufacturer identifier. Use it to set is_kme for vendor quirks */ is_kme = ((pdev->manf_id == MANFID_KME) && ((pdev->card_id == PRODID_KME_KXLC005_A) || (pdev->card_id == PRODID_KME_KXLC005_B))); - /* Not sure if this is right... look up the current Vcc */ - CS_CHECK(GetConfigurationInfo, pcmcia_get_configuration_info(pdev, &stk->conf)); -/* link->conf.Vcc = stk->conf.Vcc; */ - - pass = io_base = ctl_base = 0; - tuple.DesiredTuple = CISTPL_CFTABLE_ENTRY; - tuple.Attributes = 0; - CS_CHECK(GetFirstTuple, pcmcia_get_first_tuple(pdev, &tuple)); + /* Allocate resoure probing structures */ - /* Now munch the resources looking for a suitable set */ - while (1) { - if (pcmcia_get_tuple_data(pdev, &tuple) != 0) - goto next_entry; - if (pcmcia_parse_tuple(pdev, &tuple, &stk->parse) != 0) - goto next_entry; - /* Check for matching Vcc, unless we're desperate */ - if (!pass) { - if (cfg->vcc.present & (1 << CISTPL_POWER_VNOM)) { - if (stk->conf.Vcc != cfg->vcc.param[CISTPL_POWER_VNOM] / 10000) - goto next_entry; - } else if (stk->dflt.vcc.present & (1 << CISTPL_POWER_VNOM)) { - if (stk->conf.Vcc != stk->dflt.vcc.param[CISTPL_POWER_VNOM] / 10000) - goto next_entry; - } - } + stk = kzalloc(sizeof(*stk), GFP_KERNEL); + if (!stk) + goto out1; + stk->is_kme = is_kme; - if (cfg->vpp1.present & (1 << CISTPL_POWER_VNOM)) - pdev->conf.Vpp = cfg->vpp1.param[CISTPL_POWER_VNOM] / 10000; - else if (stk->dflt.vpp1.present & (1 << CISTPL_POWER_VNOM)) - pdev->conf.Vpp = stk->dflt.vpp1.param[CISTPL_POWER_VNOM] / 10000; - - if ((cfg->io.nwin > 0) || (stk->dflt.io.nwin > 0)) { - cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &stk->dflt.io; - pdev->conf.ConfigIndex = cfg->index; - pdev->io.BasePort1 = io->win[0].base; - pdev->io.IOAddrLines = io->flags & CISTPL_IO_LINES_MASK; - if (!(io->flags & CISTPL_IO_16BIT)) - pdev->io.Attributes1 = IO_DATA_PATH_WIDTH_8; - if (io->nwin == 2) { - pdev->io.NumPorts1 = 8; - pdev->io.BasePort2 = io->win[1].base; - pdev->io.NumPorts2 = (is_kme) ? 2 : 1; - if (pcmcia_request_io(pdev, &pdev->io) != 0) - goto next_entry; - io_base = pdev->io.BasePort1; - ctl_base = pdev->io.BasePort2; - } else if ((io->nwin == 1) && (io->win[0].len >= 16)) { - pdev->io.NumPorts1 = io->win[0].len; - pdev->io.NumPorts2 = 0; - if (pcmcia_request_io(pdev, &pdev->io) != 0) - goto next_entry; - io_base = pdev->io.BasePort1; - ctl_base = pdev->io.BasePort1 + 0x0e; - } else - goto next_entry; - /* If we've got this far, we're done */ - break; - } -next_entry: - if (cfg->flags & CISTPL_CFTABLE_DEFAULT) - memcpy(&stk->dflt, cfg, sizeof(stk->dflt)); - if (pass) { - CS_CHECK(GetNextTuple, pcmcia_get_next_tuple(pdev, &tuple)); - } else if (pcmcia_get_next_tuple(pdev, &tuple) != 0) { - CS_CHECK(GetFirstTuple, pcmcia_get_first_tuple(pdev, &tuple)); - memset(&stk->dflt, 0, sizeof(stk->dflt)); - pass++; - } + /* Not sure if this is right... look up the current Vcc */ + CS_CHECK(GetConfigurationInfo, pcmcia_get_configuration_info(pdev, &stk->conf)); + stk->skip_vcc = io_base = ctl_base = 0; + if (pcmcia_loop_config(pdev, pcmcia_check_one_config, stk)) { + memset(&stk->dflt, 0, sizeof(stk->dflt)); + stk->skip_vcc = 1; + if (pcmcia_loop_config(pdev, pcmcia_check_one_config, stk)) + goto failed; /* No suitable config found */ } - + io_base = pdev->io.BasePort1; + ctl_base = stk->ctl_base; CS_CHECK(RequestIRQ, pcmcia_request_irq(pdev, &pdev->irq)); CS_CHECK(RequestConfiguration, pcmcia_request_configuration(pdev, &pdev->conf)); -- cgit v1.2.3