From b62cfc5e0e59d1e0192105144b724b0c332720a0 Mon Sep 17 00:00:00 2001 From: Rafal Prylowski Date: Sat, 26 Nov 2011 12:54:07 +0200 Subject: dma/ep93xx_dma: fix initialization of M2M control register Setting the flags in case of IDE didn't have any effect since the control register is overwritten few lines below. So move these to be after the control register is initialized. Signed-off-by: Rafal Prylowski Signed-off-by: Mika Westerberg Acked-by: H Hartley Sweeten Signed-off-by: Vinod Koul --- drivers/dma/ep93xx_dma.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) (limited to 'drivers/dma/ep93xx_dma.c') diff --git a/drivers/dma/ep93xx_dma.c b/drivers/dma/ep93xx_dma.c index 009851b2aee..526a7424f6a 100644 --- a/drivers/dma/ep93xx_dma.c +++ b/drivers/dma/ep93xx_dma.c @@ -459,10 +459,6 @@ static int m2m_hw_setup(struct ep93xx_dma_chan *edmac) * This IDE part is totally untested. Values below are taken * from the EP93xx Users's Guide and might not be correct. */ - control |= M2M_CONTROL_NO_HDSK; - control |= M2M_CONTROL_RSS_IDE; - control |= M2M_CONTROL_PW_16; - if (data->direction == DMA_MEM_TO_DEV) { /* Worst case from the UG */ control = (3 << M2M_CONTROL_PWSC_SHIFT); @@ -473,6 +469,10 @@ static int m2m_hw_setup(struct ep93xx_dma_chan *edmac) control |= M2M_CONTROL_SAH; control |= M2M_CONTROL_TM_RX; } + + control |= M2M_CONTROL_NO_HDSK; + control |= M2M_CONTROL_RSS_IDE; + control |= M2M_CONTROL_PW_16; break; default: -- cgit v1.2.3