From 636f9d371f70f22961fd598fe18380057518ca31 Mon Sep 17 00:00:00 2001 From: Vipul Pandya Date: Wed, 26 Sep 2012 02:39:39 +0000 Subject: cxgb4: Add support for T4 configuration file Starting with T4 firmware version 1.3.11.0 the firmware now supports device configuration via a Firmware Configuration File. The Firmware Configuration File was primarily developed in order to centralize all of the configuration, resource allocation, etc. for Unified Wire operation where multiple Physical / Virtual Function Drivers would be using a T4 adapter simultaneously. The Firmware Configuration file can live in three locations as shown below in order of precedence. 1) User defined configuration file: /lib/firmware/cxgb4/t4-config.txt 2) Factory Default configuration file written to FLASH within the manufacturing process. 3) Hardwired driver configuration. Signed-off-by: Jay Hernandez Signed-off-by: Vipul Pandya Signed-off-by: David S. Miller --- drivers/net/ethernet/chelsio/cxgb4/cxgb4.h | 15 + drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c | 570 ++++++++++++++++++++---- drivers/net/ethernet/chelsio/cxgb4/cxgb4_uld.h | 2 + drivers/net/ethernet/chelsio/cxgb4/t4_hw.c | 392 +++++++++++++++- drivers/net/ethernet/chelsio/cxgb4/t4_regs.h | 37 +- drivers/net/ethernet/chelsio/cxgb4/t4fw_api.h | 37 +- 6 files changed, 920 insertions(+), 133 deletions(-) (limited to 'drivers/net/ethernet/chelsio') diff --git a/drivers/net/ethernet/chelsio/cxgb4/cxgb4.h b/drivers/net/ethernet/chelsio/cxgb4/cxgb4.h index ae040cf255a..777cbb4f62b 100644 --- a/drivers/net/ethernet/chelsio/cxgb4/cxgb4.h +++ b/drivers/net/ethernet/chelsio/cxgb4/cxgb4.h @@ -211,6 +211,9 @@ struct tp_err_stats { struct tp_params { unsigned int ntxchan; /* # of Tx channels */ unsigned int tre; /* log2 of core clocks per TP tick */ + + uint32_t dack_re; /* DACK timer resolution */ + unsigned short tx_modq[NCHAN]; /* channel to modulation queue map */ }; struct vpd_params { @@ -519,6 +522,8 @@ struct adapter { struct net_device *port[MAX_NPORTS]; u8 chan_map[NCHAN]; /* channel -> port map */ + unsigned int l2t_start; + unsigned int l2t_end; struct l2t_data *l2t; void *uld_handle[CXGB4_ULD_MAX]; struct list_head list_node; @@ -683,7 +688,9 @@ int t4_restart_aneg(struct adapter *adap, unsigned int mbox, unsigned int port); int t4_memory_write(struct adapter *adap, int mtype, u32 addr, u32 len, __be32 *buf); int t4_seeprom_wp(struct adapter *adapter, bool enable); +int get_vpd_params(struct adapter *adapter, struct vpd_params *p); int t4_load_fw(struct adapter *adapter, const u8 *fw_data, unsigned int size); +unsigned int t4_flash_cfg_addr(struct adapter *adapter); int t4_check_fw_version(struct adapter *adapter); int t4_prep_adapter(struct adapter *adapter); int t4_port_init(struct adapter *adap, int mbox, int pf, int vf); @@ -698,6 +705,8 @@ int t4_edc_read(struct adapter *adap, int idx, u32 addr, __be32 *data, void t4_get_port_stats(struct adapter *adap, int idx, struct port_stats *p); void t4_read_mtu_tbl(struct adapter *adap, u16 *mtus, u8 *mtu_log); +void t4_tp_wr_bits_indirect(struct adapter *adap, unsigned int addr, + unsigned int mask, unsigned int val); void t4_tp_get_tcp_stats(struct adapter *adap, struct tp_tcp_stats *v4, struct tp_tcp_stats *v6); void t4_load_mtus(struct adapter *adap, const unsigned short *mtus, @@ -713,6 +722,12 @@ int t4_fw_hello(struct adapter *adap, unsigned int mbox, unsigned int evt_mbox, int t4_fw_bye(struct adapter *adap, unsigned int mbox); int t4_early_init(struct adapter *adap, unsigned int mbox); int t4_fw_reset(struct adapter *adap, unsigned int mbox, int reset); +int t4_fw_config_file(struct adapter *adap, unsigned int mbox, + unsigned int mtype, unsigned int maddr, + u32 *finiver, u32 *finicsum, u32 *cfcsum); +int t4_fixup_host_params(struct adapter *adap, unsigned int page_size, + unsigned int cache_line_size); +int t4_fw_initialize(struct adapter *adap, unsigned int mbox); int t4_query_params(struct adapter *adap, unsigned int mbox, unsigned int pf, unsigned int vf, unsigned int nparams, const u32 *params, u32 *val); diff --git a/drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c b/drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c index 34d510dd56a..cb3e663c30d 100644 --- a/drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c +++ b/drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c @@ -193,6 +193,7 @@ static DEFINE_PCI_DEVICE_TABLE(cxgb4_pci_tbl) = { }; #define FW_FNAME "cxgb4/t4fw.bin" +#define FW_CFNAME "cxgb4/t4-config.txt" MODULE_DESCRIPTION(DRV_DESC); MODULE_AUTHOR("Chelsio Communications"); @@ -201,6 +202,17 @@ MODULE_VERSION(DRV_VERSION); MODULE_DEVICE_TABLE(pci, cxgb4_pci_tbl); MODULE_FIRMWARE(FW_FNAME); +/* + * Normally we're willing to become the firmware's Master PF but will be happy + * if another PF has already become the Master and initialized the adapter. + * Setting "force_init" will cause this driver to forcibly establish itself as + * the Master PF and initialize the adapter. + */ +static uint force_init; + +module_param(force_init, uint, 0644); +MODULE_PARM_DESC(force_init, "Forcibly become Master PF and initialize adapter"); + static int dflt_msg_enable = DFLT_MSG_ENABLE; module_param(dflt_msg_enable, int, 0644); @@ -236,6 +248,20 @@ module_param_array(intr_cnt, uint, NULL, 0644); MODULE_PARM_DESC(intr_cnt, "thresholds 1..3 for queue interrupt packet counters"); +/* + * Normally we tell the chip to deliver Ingress Packets into our DMA buffers + * offset by 2 bytes in order to have the IP headers line up on 4-byte + * boundaries. This is a requirement for many architectures which will throw + * a machine check fault if an attempt is made to access one of the 4-byte IP + * header fields on a non-4-byte boundary. And it's a major performance issue + * even on some architectures which allow it like some implementations of the + * x86 ISA. However, some architectures don't mind this and for some very + * edge-case performance sensitive applications (like forwarding large volumes + * of small packets), setting this DMA offset to 0 will decrease the number of + * PCI-E Bus transfers enough to measurably affect performance. + */ +static int rx_dma_offset = 2; + static bool vf_acls; #ifdef CONFIG_PCI_IOV @@ -3076,6 +3102,10 @@ static void setup_memwin(struct adapter *adap) t4_write_reg(adap, PCIE_MEM_ACCESS_REG(PCIE_MEM_ACCESS_BASE_WIN, 2), (bar0 + MEMWIN2_BASE) | BIR(0) | WINDOW(ilog2(MEMWIN2_APERTURE) - 10)); +} + +static void setup_memwin_rdma(struct adapter *adap) +{ if (adap->vres.ocq.size) { unsigned int start, sz_kb; @@ -3153,6 +3183,232 @@ static int adap_init1(struct adapter *adap, struct fw_caps_config_cmd *c) */ #define MAX_ATIDS 8192U +/* + * Phase 0 of initialization: contact FW, obtain config, perform basic init. + * + * If the firmware we're dealing with has Configuration File support, then + * we use that to perform all configuration + */ + +/* + * Tweak configuration based on module parameters, etc. Most of these have + * defaults assigned to them by Firmware Configuration Files (if we're using + * them) but need to be explicitly set if we're using hard-coded + * initialization. But even in the case of using Firmware Configuration + * Files, we'd like to expose the ability to change these via module + * parameters so these are essentially common tweaks/settings for + * Configuration Files and hard-coded initialization ... + */ +static int adap_init0_tweaks(struct adapter *adapter) +{ + /* + * Fix up various Host-Dependent Parameters like Page Size, Cache + * Line Size, etc. The firmware default is for a 4KB Page Size and + * 64B Cache Line Size ... + */ + t4_fixup_host_params(adapter, PAGE_SIZE, L1_CACHE_BYTES); + + /* + * Process module parameters which affect early initialization. + */ + if (rx_dma_offset != 2 && rx_dma_offset != 0) { + dev_err(&adapter->pdev->dev, + "Ignoring illegal rx_dma_offset=%d, using 2\n", + rx_dma_offset); + rx_dma_offset = 2; + } + t4_set_reg_field(adapter, SGE_CONTROL, + PKTSHIFT_MASK, + PKTSHIFT(rx_dma_offset)); + + /* + * Don't include the "IP Pseudo Header" in CPL_RX_PKT checksums: Linux + * adds the pseudo header itself. + */ + t4_tp_wr_bits_indirect(adapter, TP_INGRESS_CONFIG, + CSUM_HAS_PSEUDO_HDR, 0); + + return 0; +} + +/* + * Attempt to initialize the adapter via a Firmware Configuration File. + */ +static int adap_init0_config(struct adapter *adapter, int reset) +{ + struct fw_caps_config_cmd caps_cmd; + const struct firmware *cf; + unsigned long mtype = 0, maddr = 0; + u32 finiver, finicsum, cfcsum; + int ret, using_flash; + + /* + * Reset device if necessary. + */ + if (reset) { + ret = t4_fw_reset(adapter, adapter->mbox, + PIORSTMODE | PIORST); + if (ret < 0) + goto bye; + } + + /* + * If we have a T4 configuration file under /lib/firmware/cxgb4/, + * then use that. Otherwise, use the configuration file stored + * in the adapter flash ... + */ + ret = request_firmware(&cf, FW_CFNAME, adapter->pdev_dev); + if (ret < 0) { + using_flash = 1; + mtype = FW_MEMTYPE_CF_FLASH; + maddr = t4_flash_cfg_addr(adapter); + } else { + u32 params[7], val[7]; + + using_flash = 0; + if (cf->size >= FLASH_CFG_MAX_SIZE) + ret = -ENOMEM; + else { + params[0] = (FW_PARAMS_MNEM(FW_PARAMS_MNEM_DEV) | + FW_PARAMS_PARAM_X(FW_PARAMS_PARAM_DEV_CF)); + ret = t4_query_params(adapter, adapter->mbox, + adapter->fn, 0, 1, params, val); + if (ret == 0) { + /* + * For t4_memory_write() below addresses and + * sizes have to be in terms of multiples of 4 + * bytes. So, if the Configuration File isn't + * a multiple of 4 bytes in length we'll have + * to write that out separately since we can't + * guarantee that the bytes following the + * residual byte in the buffer returned by + * request_firmware() are zeroed out ... + */ + size_t resid = cf->size & 0x3; + size_t size = cf->size & ~0x3; + __be32 *data = (__be32 *)cf->data; + + mtype = FW_PARAMS_PARAM_Y_GET(val[0]); + maddr = FW_PARAMS_PARAM_Z_GET(val[0]) << 16; + + ret = t4_memory_write(adapter, mtype, maddr, + size, data); + if (ret == 0 && resid != 0) { + union { + __be32 word; + char buf[4]; + } last; + int i; + + last.word = data[size >> 2]; + for (i = resid; i < 4; i++) + last.buf[i] = 0; + ret = t4_memory_write(adapter, mtype, + maddr + size, + 4, &last.word); + } + } + } + + release_firmware(cf); + if (ret) + goto bye; + } + + /* + * Issue a Capability Configuration command to the firmware to get it + * to parse the Configuration File. We don't use t4_fw_config_file() + * because we want the ability to modify various features after we've + * processed the configuration file ... + */ + memset(&caps_cmd, 0, sizeof(caps_cmd)); + caps_cmd.op_to_write = + htonl(FW_CMD_OP(FW_CAPS_CONFIG_CMD) | + FW_CMD_REQUEST | + FW_CMD_READ); + caps_cmd.retval_len16 = + htonl(FW_CAPS_CONFIG_CMD_CFVALID | + FW_CAPS_CONFIG_CMD_MEMTYPE_CF(mtype) | + FW_CAPS_CONFIG_CMD_MEMADDR64K_CF(maddr >> 16) | + FW_LEN16(caps_cmd)); + ret = t4_wr_mbox(adapter, adapter->mbox, &caps_cmd, sizeof(caps_cmd), + &caps_cmd); + if (ret < 0) + goto bye; + + finiver = ntohl(caps_cmd.finiver); + finicsum = ntohl(caps_cmd.finicsum); + cfcsum = ntohl(caps_cmd.cfcsum); + if (finicsum != cfcsum) + dev_warn(adapter->pdev_dev, "Configuration File checksum "\ + "mismatch: [fini] csum=%#x, computed csum=%#x\n", + finicsum, cfcsum); + + /* + * If we're a pure NIC driver then disable all offloading facilities. + * This will allow the firmware to optimize aspects of the hardware + * configuration which will result in improved performance. + */ + caps_cmd.ofldcaps = 0; + caps_cmd.iscsicaps = 0; + caps_cmd.rdmacaps = 0; + caps_cmd.fcoecaps = 0; + + /* + * And now tell the firmware to use the configuration we just loaded. + */ + caps_cmd.op_to_write = + htonl(FW_CMD_OP(FW_CAPS_CONFIG_CMD) | + FW_CMD_REQUEST | + FW_CMD_WRITE); + caps_cmd.retval_len16 = htonl(FW_LEN16(caps_cmd)); + ret = t4_wr_mbox(adapter, adapter->mbox, &caps_cmd, sizeof(caps_cmd), + NULL); + if (ret < 0) + goto bye; + + /* + * Tweak configuration based on system architecture, module + * parameters, etc. + */ + ret = adap_init0_tweaks(adapter); + if (ret < 0) + goto bye; + + /* + * And finally tell the firmware to initialize itself using the + * parameters from the Configuration File. + */ + ret = t4_fw_initialize(adapter, adapter->mbox); + if (ret < 0) + goto bye; + + /* + * Return successfully and note that we're operating with parameters + * not supplied by the driver, rather than from hard-wired + * initialization constants burried in the driver. + */ + adapter->flags |= USING_SOFT_PARAMS; + dev_info(adapter->pdev_dev, "Successfully configured using Firmware "\ + "Configuration File %s, version %#x, computed checksum %#x\n", + (using_flash + ? "in device FLASH" + : "/lib/firmware/" FW_CFNAME), + finiver, cfcsum); + return 0; + + /* + * Something bad happened. Return the error ... (If the "error" + * is that there's no Configuration File on the adapter we don't + * want to issue a warning since this is fairly common.) + */ +bye: + if (ret != -ENOENT) + dev_warn(adapter->pdev_dev, "Configuration file error %d\n", + -ret); + return ret; +} + /* * Phase 0 of initialization: contact FW, obtain config, perform basic init. */ @@ -3162,72 +3418,197 @@ static int adap_init0(struct adapter *adap) u32 v, port_vec; enum dev_state state; u32 params[7], val[7]; - struct fw_caps_config_cmd c; + int reset = 1, j; - ret = t4_check_fw_version(adap); - if (ret == -EINVAL || ret > 0) { - if (upgrade_fw(adap) >= 0) /* recache FW version */ - ret = t4_check_fw_version(adap); - } - if (ret < 0) - return ret; - - /* contact FW, request master */ - ret = t4_fw_hello(adap, adap->fn, adap->fn, MASTER_MUST, &state); + /* + * Contact FW, advertising Master capability (and potentially forcing + * ourselves as the Master PF if our module parameter force_init is + * set). + */ + ret = t4_fw_hello(adap, adap->mbox, adap->fn, + force_init ? MASTER_MUST : MASTER_MAY, + &state); if (ret < 0) { dev_err(adap->pdev_dev, "could not connect to FW, error %d\n", ret); return ret; } + if (ret == adap->mbox) + adap->flags |= MASTER_PF; + if (force_init && state == DEV_STATE_INIT) + state = DEV_STATE_UNINIT; - /* reset device */ - ret = t4_fw_reset(adap, adap->fn, PIORSTMODE | PIORST); - if (ret < 0) - goto bye; - - for (v = 0; v < SGE_NTIMERS - 1; v++) - adap->sge.timer_val[v] = min(intr_holdoff[v], MAX_SGE_TIMERVAL); - adap->sge.timer_val[SGE_NTIMERS - 1] = MAX_SGE_TIMERVAL; - adap->sge.counter_val[0] = 1; - for (v = 1; v < SGE_NCOUNTERS; v++) - adap->sge.counter_val[v] = min(intr_cnt[v - 1], - THRESHOLD_3_MASK); -#define FW_PARAM_DEV(param) \ - (FW_PARAMS_MNEM(FW_PARAMS_MNEM_DEV) | \ - FW_PARAMS_PARAM_X(FW_PARAMS_PARAM_DEV_##param)) + /* + * If we're the Master PF Driver and the device is uninitialized, + * then let's consider upgrading the firmware ... (We always want + * to check the firmware version number in order to A. get it for + * later reporting and B. to warn if the currently loaded firmware + * is excessively mismatched relative to the driver.) + */ + ret = t4_check_fw_version(adap); + if ((adap->flags & MASTER_PF) && state != DEV_STATE_INIT) { + if (ret == -EINVAL || ret > 0) { + if (upgrade_fw(adap) >= 0) { + /* + * Note that the chip was reset as part of the + * firmware upgrade so we don't reset it again + * below and grab the new firmware version. + */ + reset = 0; + ret = t4_check_fw_version(adap); + } + } + if (ret < 0) + return ret; + } - params[0] = FW_PARAM_DEV(CCLK); - ret = t4_query_params(adap, adap->fn, adap->fn, 0, 1, params, val); + /* + * Grab VPD parameters. This should be done after we establish a + * connection to the firmware since some of the VPD parameters + * (notably the Core Clock frequency) are retrieved via requests to + * the firmware. On the other hand, we need these fairly early on + * so we do this right after getting ahold of the firmware. + */ + ret = get_vpd_params(adap, &adap->params.vpd); if (ret < 0) goto bye; - adap->params.vpd.cclk = val[0]; - ret = adap_init1(adap, &c); + /* + * Find out what ports are available to us. + */ + v = + FW_PARAMS_MNEM(FW_PARAMS_MNEM_DEV) | + FW_PARAMS_PARAM_X(FW_PARAMS_PARAM_DEV_PORTVEC); + ret = t4_query_params(adap, adap->mbox, adap->fn, 0, 1, &v, &port_vec); if (ret < 0) goto bye; + adap->params.nports = hweight32(port_vec); + adap->params.portvec = port_vec; + + /* + * If the firmware is initialized already (and we're not forcing a + * master initialization), note that we're living with existing + * adapter parameters. Otherwise, it's time to try initializing the + * adapter ... + */ + if (state == DEV_STATE_INIT) { + dev_info(adap->pdev_dev, "Coming up as %s: "\ + "Adapter already initialized\n", + adap->flags & MASTER_PF ? "MASTER" : "SLAVE"); + adap->flags |= USING_SOFT_PARAMS; + } else { + dev_info(adap->pdev_dev, "Coming up as MASTER: "\ + "Initializing adapter\n"); + /* + * Find out whether we're dealing with a version of + * the firmware which has configuration file support. + */ + params[0] = (FW_PARAMS_MNEM(FW_PARAMS_MNEM_DEV) | + FW_PARAMS_PARAM_X(FW_PARAMS_PARAM_DEV_CF)); + ret = t4_query_params(adap, adap->mbox, adap->fn, 0, 1, + params, val); + + /* + * If the firmware doesn't support Configuration + * Files warn user and exit, + */ + if (ret < 0) + dev_warn(adap->pdev_dev, "Firmware doesn't support "\ + "configuration file.\n"); + else { + /* + * The firmware provides us with a memory + * buffer where we can load a Configuration + * File from the host if we want to override + * the Configuration File in flash. + */ + + ret = adap_init0_config(adap, reset); + if (ret == -ENOENT) { + dev_info(adap->pdev_dev, + "No Configuration File present " + "on adapter.\n"); + } + } + if (ret < 0) { + dev_err(adap->pdev_dev, + "could not initialize adapter, error %d\n", + -ret); + goto bye; + } + } + + /* + * If we're living with non-hard-coded parameters (either from a + * Firmware Configuration File or values programmed by a different PF + * Driver), give the SGE code a chance to pull in anything that it + * needs ... Note that this must be called after we retrieve our VPD + * parameters in order to know how to convert core ticks to seconds. + */ + if (adap->flags & USING_SOFT_PARAMS) { + ret = t4_sge_init(adap); + if (ret < 0) + goto bye; + } + + /* + * Grab some of our basic fundamental operating parameters. + */ +#define FW_PARAM_DEV(param) \ + (FW_PARAMS_MNEM(FW_PARAMS_MNEM_DEV) | \ + FW_PARAMS_PARAM_X(FW_PARAMS_PARAM_DEV_##param)) + #define FW_PARAM_PFVF(param) \ - (FW_PARAMS_MNEM(FW_PARAMS_MNEM_PFVF) | \ - FW_PARAMS_PARAM_X(FW_PARAMS_PARAM_PFVF_##param) | \ - FW_PARAMS_PARAM_Y(adap->fn)) + FW_PARAMS_MNEM(FW_PARAMS_MNEM_PFVF) | \ + FW_PARAMS_PARAM_X(FW_PARAMS_PARAM_PFVF_##param)| \ + FW_PARAMS_PARAM_Y(0) | \ + FW_PARAMS_PARAM_Z(0) - params[0] = FW_PARAM_DEV(PORTVEC); + params[0] = FW_PARAM_PFVF(EQ_START); params[1] = FW_PARAM_PFVF(L2T_START); params[2] = FW_PARAM_PFVF(L2T_END); params[3] = FW_PARAM_PFVF(FILTER_START); params[4] = FW_PARAM_PFVF(FILTER_END); params[5] = FW_PARAM_PFVF(IQFLINT_START); - params[6] = FW_PARAM_PFVF(EQ_START); - ret = t4_query_params(adap, adap->fn, adap->fn, 0, 7, params, val); + ret = t4_query_params(adap, adap->mbox, adap->fn, 0, 6, params, val); if (ret < 0) goto bye; - port_vec = val[0]; + adap->sge.egr_start = val[0]; + adap->l2t_start = val[1]; + adap->l2t_end = val[2]; adap->tids.ftid_base = val[3]; adap->tids.nftids = val[4] - val[3] + 1; adap->sge.ingr_start = val[5]; - adap->sge.egr_start = val[6]; - if (c.ofldcaps) { + /* query params related to active filter region */ + params[0] = FW_PARAM_PFVF(ACTIVE_FILTER_START); + params[1] = FW_PARAM_PFVF(ACTIVE_FILTER_END); + ret = t4_query_params(adap, adap->mbox, adap->fn, 0, 2, params, val); + /* If Active filter size is set we enable establishing + * offload connection through firmware work request + */ + if ((val[0] != val[1]) && (ret >= 0)) { + adap->flags |= FW_OFLD_CONN; + adap->tids.aftid_base = val[0]; + adap->tids.aftid_end = val[1]; + } + +#ifdef CONFIG_CHELSIO_T4_OFFLOAD + /* + * Get device capabilities so we can determine what resources we need + * to manage. + */ + memset(&caps_cmd, 0, sizeof(caps_cmd)); + caps_cmd.op_to_write = htonl(V_FW_CMD_OP(FW_CAPS_CONFIG_CMD) | + F_FW_CMD_REQUEST | F_FW_CMD_READ); + caps_cmd.cfvalid_to_len16 = htonl(FW_LEN16(caps_cmd)); + ret = t4_wr_mbox(adap, adap->mbox, &caps_cmd, sizeof(caps_cmd), + &caps_cmd); + if (ret < 0) + goto bye; + + if (caps_cmd.toecaps) { /* query offload-related parameters */ params[0] = FW_PARAM_DEV(NTID); params[1] = FW_PARAM_PFVF(SERVER_START); @@ -3235,28 +3616,55 @@ static int adap_init0(struct adapter *adap) params[3] = FW_PARAM_PFVF(TDDP_START); params[4] = FW_PARAM_PFVF(TDDP_END); params[5] = FW_PARAM_DEV(FLOWC_BUFFIFO_SZ); - ret = t4_query_params(adap, adap->fn, adap->fn, 0, 6, params, - val); + ret = t4_query_params(adap, adap->mbox, adap->fn, 0, 6, + params, val); if (ret < 0) goto bye; adap->tids.ntids = val[0]; adap->tids.natids = min(adap->tids.ntids / 2, MAX_ATIDS); adap->tids.stid_base = val[1]; adap->tids.nstids = val[2] - val[1] + 1; + /* + * Setup server filter region. Divide the availble filter + * region into two parts. Regular filters get 1/3rd and server + * filters get 2/3rd part. This is only enabled if workarond + * path is enabled. + * 1. For regular filters. + * 2. Server filter: This are special filters which are used + * to redirect SYN packets to offload queue. + */ + if (adap->flags & FW_OFLD_CONN && !is_bypass(adap)) { + adap->tids.sftid_base = adap->tids.ftid_base + + DIV_ROUND_UP(adap->tids.nftids, 3); + adap->tids.nsftids = adap->tids.nftids - + DIV_ROUND_UP(adap->tids.nftids, 3); + adap->tids.nftids = adap->tids.sftid_base - + adap->tids.ftid_base; + } adap->vres.ddp.start = val[3]; adap->vres.ddp.size = val[4] - val[3] + 1; adap->params.ofldq_wr_cred = val[5]; + + params[0] = FW_PARAM_PFVF(ETHOFLD_START); + params[1] = FW_PARAM_PFVF(ETHOFLD_END); + ret = t4_query_params(adap, adap->mbox, adap->fn, 0, 2, + params, val); + if ((val[0] != val[1]) && (ret >= 0)) { + adap->tids.uotid_base = val[0]; + adap->tids.nuotids = val[1] - val[0] + 1; + } + adap->params.offload = 1; } - if (c.rdmacaps) { + if (caps_cmd.rdmacaps) { params[0] = FW_PARAM_PFVF(STAG_START); params[1] = FW_PARAM_PFVF(STAG_END); params[2] = FW_PARAM_PFVF(RQ_START); params[3] = FW_PARAM_PFVF(RQ_END); params[4] = FW_PARAM_PFVF(PBL_START); params[5] = FW_PARAM_PFVF(PBL_END); - ret = t4_query_params(adap, adap->fn, adap->fn, 0, 6, params, - val); + ret = t4_query_params(adap, adap->mbox, adap->fn, 0, 6, + params, val); if (ret < 0) goto bye; adap->vres.stag.start = val[0]; @@ -3272,8 +3680,7 @@ static int adap_init0(struct adapter *adap) params[3] = FW_PARAM_PFVF(CQ_END); params[4] = FW_PARAM_PFVF(OCQ_START); params[5] = FW_PARAM_PFVF(OCQ_END); - ret = t4_query_params(adap, adap->fn, adap->fn, 0, 6, params, - val); + ret = t4_query_params(adap, 0, 0, 0, 6, params, val); if (ret < 0) goto bye; adap->vres.qp.start = val[0]; @@ -3283,11 +3690,11 @@ static int adap_init0(struct adapter *adap) adap->vres.ocq.start = val[4]; adap->vres.ocq.size = val[5] - val[4] + 1; } - if (c.iscsicaps) { + if (caps_cmd.iscsicaps) { params[0] = FW_PARAM_PFVF(ISCSI_START); params[1] = FW_PARAM_PFVF(ISCSI_END); - ret = t4_query_params(adap, adap->fn, adap->fn, 0, 2, params, - val); + ret = t4_query_params(adap, adap->mbox, adap->fn, 0, 2, + params, val); if (ret < 0) goto bye; adap->vres.iscsi.start = val[0]; @@ -3295,63 +3702,33 @@ static int adap_init0(struct adapter *adap) } #undef FW_PARAM_PFVF #undef FW_PARAM_DEV +#endif /* CONFIG_CHELSIO_T4_OFFLOAD */ - adap->params.nports = hweight32(port_vec); - adap->params.portvec = port_vec; - adap->flags |= FW_OK; - - /* These are finalized by FW initialization, load their values now */ + /* + * These are finalized by FW initialization, load their values now. + */ v = t4_read_reg(adap, TP_TIMER_RESOLUTION); adap->params.tp.tre = TIMERRESOLUTION_GET(v); + adap->params.tp.dack_re = DELAYEDACKRESOLUTION_GET(v); t4_read_mtu_tbl(adap, adap->params.mtus, NULL); t4_load_mtus(adap, adap->params.mtus, adap->params.a_wnd, adap->params.b_wnd); -#ifdef CONFIG_PCI_IOV - /* - * Provision resource limits for Virtual Functions. We currently - * grant them all the same static resource limits except for the Port - * Access Rights Mask which we're assigning based on the PF. All of - * the static provisioning stuff for both the PF and VF really needs - * to be managed in a persistent manner for each device which the - * firmware controls. - */ - { - int pf, vf; - - for (pf = 0; pf < ARRAY_SIZE(num_vf); pf++) { - if (num_vf[pf] <= 0) - continue; - - /* VF numbering starts at 1! */ - for (vf = 1; vf <= num_vf[pf]; vf++) { - ret = t4_cfg_pfvf(adap, adap->fn, pf, vf, - VFRES_NEQ, VFRES_NETHCTRL, - VFRES_NIQFLINT, VFRES_NIQ, - VFRES_TC, VFRES_NVI, - FW_PFVF_CMD_CMASK_MASK, - pfvfres_pmask(adap, pf, vf), - VFRES_NEXACTF, - VFRES_R_CAPS, VFRES_WX_CAPS); - if (ret < 0) - dev_warn(adap->pdev_dev, "failed to " - "provision pf/vf=%d/%d; " - "err=%d\n", pf, vf, ret); - } - } - } -#endif + /* MODQ_REQ_MAP defaults to setting queues 0-3 to chan 0-3 */ + for (j = 0; j < NCHAN; j++) + adap->params.tp.tx_modq[j] = j; - setup_memwin(adap); + adap->flags |= FW_OK; return 0; /* - * If a command timed out or failed with EIO FW does not operate within - * its spec or something catastrophic happened to HW/FW, stop issuing - * commands. + * Something bad happened. If a command timed out or failed with EIO + * FW does not operate within its spec or something catastrophic + * happened to HW/FW, stop issuing commands. */ -bye: if (ret != -ETIMEDOUT && ret != -EIO) - t4_fw_bye(adap, adap->fn); +bye: + if (ret != -ETIMEDOUT && ret != -EIO) + t4_fw_bye(adap, adap->mbox); return ret; } @@ -3814,7 +4191,9 @@ static int __devinit init_one(struct pci_dev *pdev, err = t4_prep_adapter(adapter); if (err) goto out_unmap_bar; + setup_memwin(adapter); err = adap_init0(adapter); + setup_memwin_rdma(adapter); if (err) goto out_unmap_bar; @@ -3956,8 +4335,11 @@ static void __devexit remove_one(struct pci_dev *pdev) { struct adapter *adapter = pci_get_drvdata(pdev); +#ifdef CONFIG_PCI_IOV pci_disable_sriov(pdev); +#endif + if (adapter) { int i; diff --git a/drivers/net/ethernet/chelsio/cxgb4/cxgb4_uld.h b/drivers/net/ethernet/chelsio/cxgb4/cxgb4_uld.h index d79980c5fc6..1b899fea1a9 100644 --- a/drivers/net/ethernet/chelsio/cxgb4/cxgb4_uld.h +++ b/drivers/net/ethernet/chelsio/cxgb4/cxgb4_uld.h @@ -100,6 +100,8 @@ struct tid_info { unsigned int nftids; unsigned int ftid_base; + unsigned int aftid_base; + unsigned int aftid_end; spinlock_t atid_lock ____cacheline_aligned_in_smp; union aopen_entry *afree; diff --git a/drivers/net/ethernet/chelsio/cxgb4/t4_hw.c b/drivers/net/ethernet/chelsio/cxgb4/t4_hw.c index 259d0dcb008..419432d4204 100644 --- a/drivers/net/ethernet/chelsio/cxgb4/t4_hw.c +++ b/drivers/net/ethernet/chelsio/cxgb4/t4_hw.c @@ -492,8 +492,9 @@ int t4_seeprom_wp(struct adapter *adapter, bool enable) * * Reads card parameters stored in VPD EEPROM. */ -static int get_vpd_params(struct adapter *adapter, struct vpd_params *p) +int get_vpd_params(struct adapter *adapter, struct vpd_params *p) { + u32 cclk_param, cclk_val; int i, ret; int ec, sn; u8 vpd[VPD_LEN], csum; @@ -555,6 +556,19 @@ static int get_vpd_params(struct adapter *adapter, struct vpd_params *p) i = pci_vpd_info_field_size(vpd + sn - PCI_VPD_INFO_FLD_HDR_SIZE); memcpy(p->sn, vpd + sn, min(i, SERNUM_LEN)); strim(p->sn); + + /* + * Ask firmware for the Core Clock since it knows how to translate the + * Reference Clock ('V2') VPD field into a Core Clock value ... + */ + cclk_param = (FW_PARAMS_MNEM(FW_PARAMS_MNEM_DEV) | + FW_PARAMS_PARAM_X(FW_PARAMS_PARAM_DEV_CCLK)); + ret = t4_query_params(adapter, adapter->mbox, 0, 0, + 1, &cclk_param, &cclk_val); + if (ret) + return ret; + p->cclk = cclk_val; + return 0; } @@ -854,6 +868,77 @@ static int t4_flash_erase_sectors(struct adapter *adapter, int start, int end) return ret; } +/** + * t4_flash_cfg_addr - return the address of the flash configuration file + * @adapter: the adapter + * + * Return the address within the flash where the Firmware Configuration + * File is stored. + */ +unsigned int t4_flash_cfg_addr(struct adapter *adapter) +{ + if (adapter->params.sf_size == 0x100000) + return FLASH_FPGA_CFG_START; + else + return FLASH_CFG_START; +} + +/** + * t4_load_cfg - download config file + * @adap: the adapter + * @cfg_data: the cfg text file to write + * @size: text file size + * + * Write the supplied config text file to the card's serial flash. + */ +int t4_load_cfg(struct adapter *adap, const u8 *cfg_data, unsigned int size) +{ + int ret, i, n; + unsigned int addr; + unsigned int flash_cfg_start_sec; + unsigned int sf_sec_size = adap->params.sf_size / adap->params.sf_nsec; + + addr = t4_flash_cfg_addr(adap); + flash_cfg_start_sec = addr / SF_SEC_SIZE; + + if (size > FLASH_CFG_MAX_SIZE) { + dev_err(adap->pdev_dev, "cfg file too large, max is %u bytes\n", + FLASH_CFG_MAX_SIZE); + return -EFBIG; + } + + i = DIV_ROUND_UP(FLASH_CFG_MAX_SIZE, /* # of sectors spanned */ + sf_sec_size); + ret = t4_flash_erase_sectors(adap, flash_cfg_start_sec, + flash_cfg_start_sec + i - 1); + /* + * If size == 0 then we're simply erasing the FLASH sectors associated + * with the on-adapter Firmware Configuration File. + */ + if (ret || size == 0) + goto out; + + /* this will write to the flash up to SF_PAGE_SIZE at a time */ + for (i = 0; i < size; i += SF_PAGE_SIZE) { + if ((size - i) < SF_PAGE_SIZE) + n = size - i; + else + n = SF_PAGE_SIZE; + ret = t4_write_flash(adap, addr, n, cfg_data); + if (ret) + goto out; + + addr += SF_PAGE_SIZE; + cfg_data += SF_PAGE_SIZE; + } + +out: + if (ret) + dev_err(adap->pdev_dev, "config file %s failed %d\n", + (size == 0 ? "clear" : "download"), ret); + return ret; +} + /** * t4_load_fw - download firmware * @adap: the adapter @@ -1853,6 +1938,23 @@ void t4_read_mtu_tbl(struct adapter *adap, u16 *mtus, u8 *mtu_log) } } +/** + * t4_tp_wr_bits_indirect - set/clear bits in an indirect TP register + * @adap: the adapter + * @addr: the indirect TP register address + * @mask: specifies the field within the register to modify + * @val: new value for the field + * + * Sets a field of an indirect TP register to the given value. + */ +void t4_tp_wr_bits_indirect(struct adapter *adap, unsigned int addr, + unsigned int mask, unsigned int val) +{ + t4_write_reg(adap, TP_PIO_ADDR, addr); + val |= t4_read_reg(adap, TP_PIO_DATA) & ~mask; + t4_write_reg(adap, TP_PIO_DATA, val); +} + /** * init_cong_ctrl - initialize congestion control parameters * @a: the alpha values for congestion control @@ -2137,9 +2239,9 @@ int t4_fwaddrspace_write(struct adapter *adap, unsigned int mbox, struct fw_ldst_cmd c; memset(&c, 0, sizeof(c)); - c.op_to_addrspace = htonl(V_FW_CMD_OP(FW_LDST_CMD) | F_FW_CMD_REQUEST | - F_FW_CMD_WRITE | - V_FW_LDST_CMD_ADDRSPACE(FW_LDST_ADDRSPC_FIRMWARE)); + c.op_to_addrspace = htonl(FW_CMD_OP(FW_LDST_CMD) | FW_CMD_REQUEST | + FW_CMD_WRITE | + FW_LDST_CMD_ADDRSPACE(FW_LDST_ADDRSPC_FIRMWARE)); c.cycles_to_len16 = htonl(FW_LEN16(c)); c.u.addrval.addr = htonl(addr); c.u.addrval.val = htonl(val); @@ -2239,39 +2341,129 @@ int t4_mdio_wr(struct adapter *adap, unsigned int mbox, unsigned int phy_addr, } /** - * t4_fw_hello - establish communication with FW - * @adap: the adapter - * @mbox: mailbox to use for the FW command - * @evt_mbox: mailbox to receive async FW events - * @master: specifies the caller's willingness to be the device master - * @state: returns the current device state + * t4_fw_hello - establish communication with FW + * @adap: the adapter + * @mbox: mailbox to use for the FW command + * @evt_mbox: mailbox to receive async FW events + * @master: specifies the caller's willingness to be the device master + * @state: returns the current device state (if non-NULL) * - * Issues a command to establish communication with FW. + * Issues a command to establish communication with FW. Returns either + * an error (negative integer) or the mailbox of the Master PF. */ int t4_fw_hello(struct adapter *adap, unsigned int mbox, unsigned int evt_mbox, enum dev_master master, enum dev_state *state) { int ret; struct fw_hello_cmd c; + u32 v; + unsigned int master_mbox; + int retries = FW_CMD_HELLO_RETRIES; +retry: + memset(&c, 0, sizeof(c)); INIT_CMD(c, HELLO, WRITE); c.err_to_mbasyncnot = htonl( FW_HELLO_CMD_MASTERDIS(master == MASTER_CANT) | FW_HELLO_CMD_MASTERFORCE(master == MASTER_MUST) | - FW_HELLO_CMD_MBMASTER(master == MASTER_MUST ? mbox : 0xff) | - FW_HELLO_CMD_MBASYNCNOT(evt_mbox)); + FW_HELLO_CMD_MBMASTER(master == MASTER_MUST ? mbox : + FW_HELLO_CMD_MBMASTER_MASK) | + FW_HELLO_CMD_MBASYNCNOT(evt_mbox) | + FW_HELLO_CMD_STAGE(fw_hello_cmd_stage_os) | + FW_HELLO_CMD_CLEARINIT); + /* + * Issue the HELLO command to the firmware. If it's not successful + * but indicates that we got a "busy" or "timeout" condition, retry + * the HELLO until we exhaust our retry limit. + */ ret = t4_wr_mbox(adap, mbox, &c, sizeof(c), &c); - if (ret == 0 && state) { - u32 v = ntohl(c.err_to_mbasyncnot); - if (v & FW_HELLO_CMD_INIT) - *state = DEV_STATE_INIT; - else if (v & FW_HELLO_CMD_ERR) + if (ret < 0) { + if ((ret == -EBUSY || ret == -ETIMEDOUT) && retries-- > 0) + goto retry; + return ret; + } + + v = ntohl(c.err_to_mbasyncnot); + master_mbox = FW_HELLO_CMD_MBMASTER_GET(v); + if (state) { + if (v & FW_HELLO_CMD_ERR) *state = DEV_STATE_ERR; + else if (v & FW_HELLO_CMD_INIT) + *state = DEV_STATE_INIT; else *state = DEV_STATE_UNINIT; } - return ret; + + /* + * If we're not the Master PF then we need to wait around for the + * Master PF Driver to finish setting up the adapter. + * + * Note that we also do this wait if we're a non-Master-capable PF and + * there is no current Master PF; a Master PF may show up momentarily + * and we wouldn't want to fail pointlessly. (This can happen when an + * OS loads lots of different drivers rapidly at the same time). In + * this case, the Master PF returned by the firmware will be + * FW_PCIE_FW_MASTER_MASK so the test below will work ... + */ + if ((v & (FW_HELLO_CMD_ERR|FW_HELLO_CMD_INIT)) == 0 && + master_mbox != mbox) { + int waiting = FW_CMD_HELLO_TIMEOUT; + + /* + * Wait for the firmware to either indicate an error or + * initialized state. If we see either of these we bail out + * and report the issue to the caller. If we exhaust the + * "hello timeout" and we haven't exhausted our retries, try + * again. Otherwise bail with a timeout error. + */ + for (;;) { + u32 pcie_fw; + + msleep(50); + waiting -= 50; + + /* + * If neither Error nor Initialialized are indicated + * by the firmware keep waiting till we exaust our + * timeout ... and then retry if we haven't exhausted + * our retries ... + */ + pcie_fw = t4_read_reg(adap, MA_PCIE_FW); + if (!(pcie_fw & (FW_PCIE_FW_ERR|FW_PCIE_FW_INIT))) { + if (waiting <= 0) { + if (retries-- > 0) + goto retry; + + return -ETIMEDOUT; + } + continue; + } + + /* + * We either have an Error or Initialized condition + * report errors preferentially. + */ + if (state) { + if (pcie_fw & FW_PCIE_FW_ERR) + *state = DEV_STATE_ERR; + else if (pcie_fw & FW_PCIE_FW_INIT) + *state = DEV_STATE_INIT; + } + + /* + * If we arrived before a Master PF was selected and + * there's not a valid Master PF, grab its identity + * for our caller. + */ + if (master_mbox == FW_PCIE_FW_MASTER_MASK && + (pcie_fw & FW_PCIE_FW_MASTER_VLD)) + master_mbox = FW_PCIE_FW_MASTER_GET(pcie_fw); + break; + } + } + + return master_mbox; } /** @@ -2322,6 +2514,163 @@ int t4_fw_reset(struct adapter *adap, unsigned int mbox, int reset) return t4_wr_mbox(adap, mbox, &c, sizeof(c), NULL); } +/** + * t4_fw_config_file - setup an adapter via a Configuration File + * @adap: the adapter + * @mbox: mailbox to use for the FW command + * @mtype: the memory type where the Configuration File is located + * @maddr: the memory address where the Configuration File is located + * @finiver: return value for CF [fini] version + * @finicsum: return value for CF [fini] checksum + * @cfcsum: return value for CF computed checksum + * + * Issue a command to get the firmware to process the Configuration + * File located at the specified mtype/maddress. If the Configuration + * File is processed successfully and return value pointers are + * provided, the Configuration File "[fini] section version and + * checksum values will be returned along with the computed checksum. + * It's up to the caller to decide how it wants to respond to the + * checksums not matching but it recommended that a prominant warning + * be emitted in order to help people rapidly identify changed or + * corrupted Configuration Files. + * + * Also note that it's possible to modify things like "niccaps", + * "toecaps",etc. between processing the Configuration File and telling + * the firmware to use the new configuration. Callers which want to + * do this will need to "hand-roll" their own CAPS_CONFIGS commands for + * Configuration Files if they want to do this. + */ +int t4_fw_config_file(struct adapter *adap, unsigned int mbox, + unsigned int mtype, unsigned int maddr, + u32 *finiver, u32 *finicsum, u32 *cfcsum) +{ + struct fw_caps_config_cmd caps_cmd; + int ret; + + /* + * Tell the firmware to process the indicated Configuration File. + * If there are no errors and the caller has provided return value + * pointers for the [fini] section version, checksum and computed + * checksum, pass those back to the caller. + */ + memset(&caps_cmd, 0, sizeof(caps_cmd)); + caps_cmd.op_to_write = + htonl(FW_CMD_OP(FW_CAPS_CONFIG_CMD) | + FW_CMD_REQUEST | + FW_CMD_READ); + caps_cmd.retval_len16 = + htonl(FW_CAPS_CONFIG_CMD_CFVALID | + FW_CAPS_CONFIG_CMD_MEMTYPE_CF(mtype) | + FW_CAPS_CONFIG_CMD_MEMADDR64K_CF(maddr >> 16) | + FW_LEN16(caps_cmd)); + ret = t4_wr_mbox(adap, mbox, &caps_cmd, sizeof(caps_cmd), &caps_cmd); + if (ret < 0) + return ret; + + if (finiver) + *finiver = ntohl(caps_cmd.finiver); + if (finicsum) + *finicsum = ntohl(caps_cmd.finicsum); + if (cfcsum) + *cfcsum = ntohl(caps_cmd.cfcsum); + + /* + * And now tell the firmware to use the configuration we just loaded. + */ + caps_cmd.op_to_write = + htonl(FW_CMD_OP(FW_CAPS_CONFIG_CMD) | + FW_CMD_REQUEST | + FW_CMD_WRITE); + caps_cmd.retval_len16 = htonl(FW_LEN16(caps_cmd)); + return t4_wr_mbox(adap, mbox, &caps_cmd, sizeof(caps_cmd), NULL); +} + +/** + * t4_fixup_host_params - fix up host-dependent parameters + * @adap: the adapter + * @page_size: the host's Base Page Size + * @cache_line_size: the host's Cache Line Size + * + * Various registers in T4 contain values which are dependent on the + * host's Base Page and Cache Line Sizes. This function will fix all of + * those registers with the appropriate values as passed in ... + */ +int t4_fixup_host_params(struct adapter *adap, unsigned int page_size, + unsigned int cache_line_size) +{ + unsigned int page_shift = fls(page_size) - 1; + unsigned int sge_hps = page_shift - 10; + unsigned int stat_len = cache_line_size > 64 ? 128 : 64; + unsigned int fl_align = cache_line_size < 32 ? 32 : cache_line_size; + unsigned int fl_align_log = fls(fl_align) - 1; + + t4_write_reg(adap, SGE_HOST_PAGE_SIZE, + HOSTPAGESIZEPF0(sge_hps) | + HOSTPAGESIZEPF1(sge_hps) | + HOSTPAGESIZEPF2(sge_hps) | + HOSTPAGESIZEPF3(sge_hps) | + HOSTPAGESIZEPF4(sge_hps) | + HOSTPAGESIZEPF5(sge_hps) | + HOSTPAGESIZEPF6(sge_hps) | + HOSTPAGESIZEPF7(sge_hps)); + + t4_set_reg_field(adap, SGE_CONTROL, + INGPADBOUNDARY(INGPADBOUNDARY_MASK) | + EGRSTATUSPAGESIZE_MASK, + INGPADBOUNDARY(fl_align_log - 5) | + EGRSTATUSPAGESIZE(stat_len != 64)); + + /* + * Adjust various SGE Free List Host Buffer Sizes. + * + * This is something of a crock since we're using fixed indices into + * the array which are also known by the sge.c code and the T4 + * Firmware Configuration File. We need to come up with a much better + * approach to managing this array. For now, the first four entries + * are: + * + * 0: Host Page Size + * 1: 64KB + * 2: Buffer size corresponding to 1500 byte MTU (unpacked mode) + * 3: Buffer size corresponding to 9000 byte MTU (unpacked mode) + * + * For the single-MTU buffers in unpacked mode we need to include + * space for the SGE Control Packet Shift, 14 byte Ethernet header, + * possible 4 byte VLAN tag, all rounded up to the next Ingress Packet + * Padding boundry. All of these are accommodated in the Factory + * Default Firmware Configuration File but we need to adjust it for + * this host's cache line size. + */ + t4_write_reg(adap, SGE_FL_BUFFER_SIZE0, page_size); + t4_write_reg(adap, SGE_FL_BUFFER_SIZE2, + (t4_read_reg(adap, SGE_FL_BUFFER_SIZE2) + fl_align-1) + & ~(fl_align-1)); + t4_write_reg(adap, SGE_FL_BUFFER_SIZE3, + (t4_read_reg(adap, SGE_FL_BUFFER_SIZE3) + fl_align-1) + & ~(fl_align-1)); + + t4_write_reg(adap, ULP_RX_TDDP_PSZ, HPZ0(page_shift - 12)); + + return 0; +} + +/** + * t4_fw_initialize - ask FW to initialize the device + * @adap: the adapter + * @mbox: mailbox to use for the FW command + * + * Issues a command to FW to partially initialize the device. This + * performs initialization that generally doesn't depend on user input. + */ +int t4_fw_initialize(struct adapter *adap, unsigned int mbox) +{ + struct fw_initialize_cmd c; + + memset(&c, 0, sizeof(c)); + INIT_CMD(c, INITIALIZE, WRITE); + return t4_wr_mbox(adap, mbox, &c, sizeof(c), NULL); +} + /** * t4_query_params - query FW or device parameters * @adap: the adapter @@ -2974,10 +3323,6 @@ int __devinit t4_prep_adapter(struct adapter *adapter) return ret; } - ret = get_vpd_params(adapter, &adapter->params.vpd); - if (ret < 0) - return ret; - init_cong_ctrl(adapter->params.a_wnd, adapter->params.b_wnd); /* @@ -2985,6 +3330,7 @@ int __devinit t4_prep_adapter(struct adapter *adapter) */ adapter->params.nports = 1; adapter->params.portvec = 1; + adapter->params.vpd.cclk = 50000; return 0; } diff --git a/drivers/net/ethernet/chelsio/cxgb4/t4_regs.h b/drivers/net/ethernet/chelsio/cxgb4/t4_regs.h index 2767ca6dbe9..779b23f8f59 100644 --- a/drivers/net/ethernet/chelsio/cxgb4/t4_regs.h +++ b/drivers/net/ethernet/chelsio/cxgb4/t4_regs.h @@ -115,6 +115,35 @@ #define GLOBALENABLE 0x00000001U #define SGE_HOST_PAGE_SIZE 0x100c + +#define HOSTPAGESIZEPF7_MASK 0x0000000fU +#define HOSTPAGESIZEPF7_SHIFT 28 +#define HOSTPAGESIZEPF7(x) ((x) << HOSTPAGESIZEPF7_SHIFT) + +#define HOSTPAGESIZEPF6_MASK 0x0000000fU +#define HOSTPAGESIZEPF6_SHIFT 24 +#define HOSTPAGESIZEPF6(x) ((x) << HOSTPAGESIZEPF6_SHIFT) + +#define HOSTPAGESIZEPF5_MASK 0x0000000fU +#define HOSTPAGESIZEPF5_SHIFT 20 +#define HOSTPAGESIZEPF5(x) ((x) << HOSTPAGESIZEPF5_SHIFT) + +#define HOSTPAGESIZEPF4_MASK 0x0000000fU +#define HOSTPAGESIZEPF4_SHIFT 16 +#define HOSTPAGESIZEPF4(x) ((x) << HOSTPAGESIZEPF4_SHIFT) + +#define HOSTPAGESIZEPF3_MASK 0x0000000fU +#define HOSTPAGESIZEPF3_SHIFT 12 +#define HOSTPAGESIZEPF3(x) ((x) << HOSTPAGESIZEPF3_SHIFT) + +#define HOSTPAGESIZEPF2_MASK 0x0000000fU +#define HOSTPAGESIZEPF2_SHIFT 8 +#define HOSTPAGESIZEPF2(x) ((x) << HOSTPAGESIZEPF2_SHIFT) + +#define HOSTPAGESIZEPF1_MASK 0x0000000fU +#define HOSTPAGESIZEPF1_SHIFT 4 +#define HOSTPAGESIZEPF1(x) ((x) << HOSTPAGESIZEPF1_SHIFT) + #define HOSTPAGESIZEPF0_MASK 0x0000000fU #define HOSTPAGESIZEPF0_SHIFT 0 #define HOSTPAGESIZEPF0(x) ((x) << HOSTPAGESIZEPF0_SHIFT) @@ -162,6 +191,8 @@ #define SGE_INT_ENABLE3 0x1040 #define SGE_FL_BUFFER_SIZE0 0x1044 #define SGE_FL_BUFFER_SIZE1 0x1048 +#define SGE_FL_BUFFER_SIZE2 0x104c +#define SGE_FL_BUFFER_SIZE3 0x1050 #define SGE_INGRESS_RX_THRESHOLD 0x10a0 #define THRESHOLD_0_MASK 0x3f000000U #define THRESHOLD_0_SHIFT 24 @@ -367,7 +398,7 @@ #define MEM_WRAP_CLIENT_NUM_MASK 0x0000000fU #define MEM_WRAP_CLIENT_NUM_SHIFT 0 #define MEM_WRAP_CLIENT_NUM_GET(x) (((x) & MEM_WRAP_CLIENT_NUM_MASK) >> MEM_WRAP_CLIENT_NUM_SHIFT) - +#define MA_PCIE_FW 0x30b8 #define MA_PARITY_ERROR_STATUS 0x77f4 #define EDC_0_BASE_ADDR 0x7900 @@ -469,6 +500,10 @@ #define TIMERRESOLUTION_MASK 0x00ff0000U #define TIMERRESOLUTION_SHIFT 16 #define TIMERRESOLUTION_GET(x) (((x) & TIMERRESOLUTION_MASK) >> TIMERRESOLUTION_SHIFT) +#define DELAYEDACKRESOLUTION_MASK 0x000000ffU +#define DELAYEDACKRESOLUTION_SHIFT 0 +#define DELAYEDACKRESOLUTION_GET(x) \ + (((x) & DELAYEDACKRESOLUTION_MASK) >> DELAYEDACKRESOLUTION_SHIFT) #define TP_SHIFT_CNT 0x7dc0 diff --git a/drivers/net/ethernet/chelsio/cxgb4/t4fw_api.h b/drivers/net/ethernet/chelsio/cxgb4/t4fw_api.h index 94e3484b7d9..3f85019106f 100644 --- a/drivers/net/ethernet/chelsio/cxgb4/t4fw_api.h +++ b/drivers/net/ethernet/chelsio/cxgb4/t4fw_api.h @@ -155,6 +155,17 @@ struct fw_eth_tx_pkt_vm_wr { #define FW_CMD_MAX_TIMEOUT 3000 +/* + * If a host driver does a HELLO and discovers that there's already a MASTER + * selected, we may have to wait for that MASTER to finish issuing RESET, + * configuration and INITIALIZE commands. Also, there's a possibility that + * our own HELLO may get lost if it happens right as the MASTER is issuign a + * RESET command, so we need to be willing to make a few retries of our HELLO. + */ +#define FW_CMD_HELLO_TIMEOUT (3 * FW_CMD_MAX_TIMEOUT) +#define FW_CMD_HELLO_RETRIES 3 + + enum fw_cmd_opcodes { FW_LDST_CMD = 0x01, FW_RESET_CMD = 0x03, @@ -307,6 +318,10 @@ struct fw_reset_cmd { __be32 r3; }; +enum fw_hellow_cmd { + fw_hello_cmd_stage_os = 0x0 +}; + struct fw_hello_cmd { __be32 op_to_write; __be32 retval_len16; @@ -315,8 +330,14 @@ struct fw_hello_cmd { #define FW_HELLO_CMD_INIT (1U << 30) #define FW_HELLO_CMD_MASTERDIS(x) ((x) << 29) #define FW_HELLO_CMD_MASTERFORCE(x) ((x) << 28) -#define FW_HELLO_CMD_MBMASTER(x) ((x) << 24) +#define FW_HELLO_CMD_MBMASTER_MASK 0xfU +#define FW_HELLO_CMD_MBMASTER_SHIFT 24 +#define FW_HELLO_CMD_MBMASTER(x) ((x) << FW_HELLO_CMD_MBMASTER_SHIFT) +#define FW_HELLO_CMD_MBMASTER_GET(x) \ + (((x) >> FW_HELLO_CMD_MBMASTER_SHIFT) & FW_HELLO_CMD_MBMASTER_MASK) #define FW_HELLO_CMD_MBASYNCNOT(x) ((x) << 20) +#define FW_HELLO_CMD_STAGE(x) ((x) << 17) +#define FW_HELLO_CMD_CLEARINIT (1U << 16) __be32 fwrev; }; @@ -1654,18 +1675,4 @@ struct fw_hdr { #define FW_HDR_FW_VER_MICRO_GET(x) (((x) >> 8) & 0xff) #define FW_HDR_FW_VER_BUILD_GET(x) (((x) >> 0) & 0xff) -#define S_FW_CMD_OP 24 -#define V_FW_CMD_OP(x) ((x) << S_FW_CMD_OP) - -#define S_FW_CMD_REQUEST 23 -#define V_FW_CMD_REQUEST(x) ((x) << S_FW_CMD_REQUEST) -#define F_FW_CMD_REQUEST V_FW_CMD_REQUEST(1U) - -#define S_FW_CMD_WRITE 21 -#define V_FW_CMD_WRITE(x) ((x) << S_FW_CMD_WRITE) -#define F_FW_CMD_WRITE V_FW_CMD_WRITE(1U) - -#define S_FW_LDST_CMD_ADDRSPACE 0 -#define V_FW_LDST_CMD_ADDRSPACE(x) ((x) << S_FW_LDST_CMD_ADDRSPACE) - #endif /* _T4FW_INTERFACE_H_ */ -- cgit v1.2.3