From 1da177e4c3f41524e886b7f1b8a0c1fc7321cac2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Sat, 16 Apr 2005 15:20:36 -0700 Subject: Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip! --- drivers/scsi/sun3_scsi.c | 642 +++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 642 insertions(+) create mode 100644 drivers/scsi/sun3_scsi.c (limited to 'drivers/scsi/sun3_scsi.c') diff --git a/drivers/scsi/sun3_scsi.c b/drivers/scsi/sun3_scsi.c new file mode 100644 index 00000000000..e3ea99f23d6 --- /dev/null +++ b/drivers/scsi/sun3_scsi.c @@ -0,0 +1,642 @@ +/* + * Sun3 SCSI stuff by Erik Verbruggen (erik@bigmama.xtdnet.nl) + * + * Sun3 DMA routines added by Sam Creasey (sammy@sammy.net) + * + * Adapted from mac_scsinew.c: + */ +/* + * Generic Macintosh NCR5380 driver + * + * Copyright 1998, Michael Schmitz + * + * derived in part from: + */ +/* + * Generic Generic NCR5380 driver + * + * Copyright 1995, Russell King + * + * ALPHA RELEASE 1. + * + * For more information, please consult + * + * NCR 5380 Family + * SCSI Protocol Controller + * Databook + * + * NCR Microelectronics + * 1635 Aeroplaza Drive + * Colorado Springs, CO 80916 + * 1+ (719) 578-3400 + * 1+ (800) 334-5454 + */ + + +/* + * This is from mac_scsi.h, but hey, maybe this is useful for Sun3 too! :) + * + * Options : + * + * PARITY - enable parity checking. Not supported. + * + * SCSI2 - enable support for SCSI-II tagged queueing. Untested. + * + * USLEEP - enable support for devices that don't disconnect. Untested. + */ + +/* + * $Log: sun3_NCR5380.c,v $ + */ + +#define AUTOSENSE + +#include +#include +#include +#include + +#include +#include +#include +#include +#include +#include + +#include +#include + +#include +#include +#include +#include + +/* dma on! */ +#define REAL_DMA + +#include "scsi.h" +#include +#include "sun3_scsi.h" +#include "NCR5380.h" + +static void NCR5380_print(struct Scsi_Host *instance); + +/* #define OLDDMA */ + +#define USE_WRAPPER +/*#define RESET_BOOT */ +#define DRIVER_SETUP + +#define NDEBUG 0 + +/* + * BUG can be used to trigger a strange code-size related hang on 2.1 kernels + */ +#ifdef BUG +#undef RESET_BOOT +#undef DRIVER_SETUP +#endif + +/* #define SUPPORT_TAGS */ + +#define ENABLE_IRQ() enable_irq( IRQ_SUN3_SCSI ); + + +static irqreturn_t scsi_sun3_intr(int irq, void *dummy, struct pt_regs *fp); +static inline unsigned char sun3scsi_read(int reg); +static inline void sun3scsi_write(int reg, int value); + +static int setup_can_queue = -1; +module_param(setup_can_queue, int, 0); +static int setup_cmd_per_lun = -1; +module_param(setup_cmd_per_lun, int, 0); +static int setup_sg_tablesize = -1; +module_param(setup_sg_tablesize, int, 0); +#ifdef SUPPORT_TAGS +static int setup_use_tagged_queuing = -1; +module_param(setup_use_tagged_queuing, int, 0); +#endif +static int setup_hostid = -1; +module_param(setup_hostid, int, 0); + +static Scsi_Cmnd *sun3_dma_setup_done = NULL; + +#define AFTER_RESET_DELAY (HZ/2) + +/* ms to wait after hitting dma regs */ +#define SUN3_DMA_DELAY 10 + +/* dvma buffer to allocate -- 32k should hopefully be more than sufficient */ +#define SUN3_DVMA_BUFSIZE 0xe000 + +/* minimum number of bytes to do dma on */ +#define SUN3_DMA_MINSIZE 128 + +static volatile unsigned char *sun3_scsi_regp; +static volatile struct sun3_dma_regs *dregs; +#ifdef OLDDMA +static unsigned char *dmabuf = NULL; /* dma memory buffer */ +#endif +static struct sun3_udc_regs *udc_regs = NULL; +static unsigned char *sun3_dma_orig_addr = NULL; +static unsigned long sun3_dma_orig_count = 0; +static int sun3_dma_active = 0; +static unsigned long last_residual = 0; + +/* + * NCR 5380 register access functions + */ + +static inline unsigned char sun3scsi_read(int reg) +{ + return( sun3_scsi_regp[reg] ); +} + +static inline void sun3scsi_write(int reg, int value) +{ + sun3_scsi_regp[reg] = value; +} + +/* dma controller register access functions */ + +static inline unsigned short sun3_udc_read(unsigned char reg) +{ + unsigned short ret; + + dregs->udc_addr = UDC_CSR; + udelay(SUN3_DMA_DELAY); + ret = dregs->udc_data; + udelay(SUN3_DMA_DELAY); + + return ret; +} + +static inline void sun3_udc_write(unsigned short val, unsigned char reg) +{ + dregs->udc_addr = reg; + udelay(SUN3_DMA_DELAY); + dregs->udc_data = val; + udelay(SUN3_DMA_DELAY); +} + +/* + * XXX: status debug + */ +static struct Scsi_Host *default_instance; + +/* + * Function : int sun3scsi_detect(Scsi_Host_Template * tpnt) + * + * Purpose : initializes mac NCR5380 driver based on the + * command line / compile time port and irq definitions. + * + * Inputs : tpnt - template for this SCSI adapter. + * + * Returns : 1 if a host adapter was found, 0 if not. + * + */ + +int sun3scsi_detect(Scsi_Host_Template * tpnt) +{ + unsigned long ioaddr; + static int called = 0; + struct Scsi_Host *instance; + + /* check that this machine has an onboard 5380 */ + switch(idprom->id_machtype) { + case SM_SUN3|SM_3_50: + case SM_SUN3|SM_3_60: + break; + + default: + return 0; + } + + if(called) + return 0; + + tpnt->proc_name = "Sun3 5380 SCSI"; + + /* setup variables */ + tpnt->can_queue = + (setup_can_queue > 0) ? setup_can_queue : CAN_QUEUE; + tpnt->cmd_per_lun = + (setup_cmd_per_lun > 0) ? setup_cmd_per_lun : CMD_PER_LUN; + tpnt->sg_tablesize = + (setup_sg_tablesize >= 0) ? setup_sg_tablesize : SG_TABLESIZE; + + if (setup_hostid >= 0) + tpnt->this_id = setup_hostid; + else { + /* use 7 as default */ + tpnt->this_id = 7; + } + + ioaddr = (unsigned long)ioremap(IOBASE_SUN3_SCSI, PAGE_SIZE); + sun3_scsi_regp = (unsigned char *)ioaddr; + + dregs = (struct sun3_dma_regs *)(((unsigned char *)ioaddr) + 8); + + if((udc_regs = dvma_malloc(sizeof(struct sun3_udc_regs))) + == NULL) { + printk("SUN3 Scsi couldn't allocate DVMA memory!\n"); + return 0; + } +#ifdef OLDDMA + if((dmabuf = dvma_malloc_align(SUN3_DVMA_BUFSIZE, 0x10000)) == NULL) { + printk("SUN3 Scsi couldn't allocate DVMA memory!\n"); + return 0; + } +#endif +#ifdef SUPPORT_TAGS + if (setup_use_tagged_queuing < 0) + setup_use_tagged_queuing = USE_TAGGED_QUEUING; +#endif + + instance = scsi_register (tpnt, sizeof(struct NCR5380_hostdata)); + if(instance == NULL) + return 0; + + default_instance = instance; + + instance->io_port = (unsigned long) ioaddr; + instance->irq = IRQ_SUN3_SCSI; + + NCR5380_init(instance, 0); + + instance->n_io_port = 32; + + ((struct NCR5380_hostdata *)instance->hostdata)->ctrl = 0; + + if (request_irq(instance->irq, scsi_sun3_intr, + 0, "Sun3SCSI-5380", NULL)) { +#ifndef REAL_DMA + printk("scsi%d: IRQ%d not free, interrupts disabled\n", + instance->host_no, instance->irq); + instance->irq = SCSI_IRQ_NONE; +#else + printk("scsi%d: IRQ%d not free, bailing out\n", + instance->host_no, instance->irq); + return 0; +#endif + } + + printk("scsi%d: Sun3 5380 at port %lX irq", instance->host_no, instance->io_port); + if (instance->irq == SCSI_IRQ_NONE) + printk ("s disabled"); + else + printk (" %d", instance->irq); + printk(" options CAN_QUEUE=%d CMD_PER_LUN=%d release=%d", + instance->can_queue, instance->cmd_per_lun, + SUN3SCSI_PUBLIC_RELEASE); + printk("\nscsi%d:", instance->host_no); + NCR5380_print_options(instance); + printk("\n"); + + dregs->csr = 0; + udelay(SUN3_DMA_DELAY); + dregs->csr = CSR_SCSI | CSR_FIFO | CSR_INTR; + udelay(SUN3_DMA_DELAY); + dregs->fifo_count = 0; + + called = 1; + +#ifdef RESET_BOOT + sun3_scsi_reset_boot(instance); +#endif + + return 1; +} + +int sun3scsi_release (struct Scsi_Host *shpnt) +{ + if (shpnt->irq != SCSI_IRQ_NONE) + free_irq (shpnt->irq, NULL); + + iounmap((void *)sun3_scsi_regp); + + return 0; +} + +#ifdef RESET_BOOT +/* + * Our 'bus reset on boot' function + */ + +static void sun3_scsi_reset_boot(struct Scsi_Host *instance) +{ + unsigned long end; + + NCR5380_local_declare(); + NCR5380_setup(instance); + + /* + * Do a SCSI reset to clean up the bus during initialization. No + * messing with the queues, interrupts, or locks necessary here. + */ + + printk( "Sun3 SCSI: resetting the SCSI bus..." ); + + /* switch off SCSI IRQ - catch an interrupt without IRQ bit set else */ +// sun3_disable_irq( IRQ_SUN3_SCSI ); + + /* get in phase */ + NCR5380_write( TARGET_COMMAND_REG, + PHASE_SR_TO_TCR( NCR5380_read(STATUS_REG) )); + + /* assert RST */ + NCR5380_write( INITIATOR_COMMAND_REG, ICR_BASE | ICR_ASSERT_RST ); + + /* The min. reset hold time is 25us, so 40us should be enough */ + udelay( 50 ); + + /* reset RST and interrupt */ + NCR5380_write( INITIATOR_COMMAND_REG, ICR_BASE ); + NCR5380_read( RESET_PARITY_INTERRUPT_REG ); + + for( end = jiffies + AFTER_RESET_DELAY; time_before(jiffies, end); ) + barrier(); + + /* switch on SCSI IRQ again */ +// sun3_enable_irq( IRQ_SUN3_SCSI ); + + printk( " done\n" ); +} +#endif + +const char * sun3scsi_info (struct Scsi_Host *spnt) { + return ""; +} + +// safe bits for the CSR +#define CSR_GOOD 0x060f + +static irqreturn_t scsi_sun3_intr(int irq, void *dummy, struct pt_regs *fp) +{ + unsigned short csr = dregs->csr; + int handled = 0; + + if(csr & ~CSR_GOOD) { + if(csr & CSR_DMA_BUSERR) { + printk("scsi%d: bus error in dma\n", default_instance->host_no); + } + + if(csr & CSR_DMA_CONFLICT) { + printk("scsi%d: dma conflict\n", default_instance->host_no); + } + handled = 1; + } + + if(csr & (CSR_SDB_INT | CSR_DMA_INT)) { + NCR5380_intr(irq, dummy, fp); + handled = 1; + } + + return IRQ_RETVAL(handled); +} + +/* + * Debug stuff - to be called on NMI, or sysrq key. Use at your own risk; + * reentering NCR5380_print_status seems to have ugly side effects + */ + +/* this doesn't seem to get used at all -- sam */ +#if 0 +void sun3_sun3_debug (void) +{ + unsigned long flags; + NCR5380_local_declare(); + + if (default_instance) { + local_irq_save(flags); + NCR5380_print_status(default_instance); + local_irq_restore(flags); + } +} +#endif + + +/* sun3scsi_dma_setup() -- initialize the dma controller for a read/write */ +static unsigned long sun3scsi_dma_setup(void *data, unsigned long count, int write_flag) +{ +#ifdef OLDDMA + if(write_flag) + memcpy(dmabuf, data, count); + else { + sun3_dma_orig_addr = data; + sun3_dma_orig_count = count; + } +#else + void *addr; + + if(sun3_dma_orig_addr != NULL) + dvma_unmap(sun3_dma_orig_addr); + +// addr = sun3_dvma_page((unsigned long)data, (unsigned long)dmabuf); + addr = (void *)dvma_map((unsigned long) data, count); + + sun3_dma_orig_addr = addr; + sun3_dma_orig_count = count; +#endif + dregs->fifo_count = 0; + sun3_udc_write(UDC_RESET, UDC_CSR); + + /* reset fifo */ + dregs->csr &= ~CSR_FIFO; + dregs->csr |= CSR_FIFO; + + /* set direction */ + if(write_flag) + dregs->csr |= CSR_SEND; + else + dregs->csr &= ~CSR_SEND; + + /* byte count for fifo */ + dregs->fifo_count = count; + + sun3_udc_write(UDC_RESET, UDC_CSR); + + /* reset fifo */ + dregs->csr &= ~CSR_FIFO; + dregs->csr |= CSR_FIFO; + + if(dregs->fifo_count != count) { + printk("scsi%d: fifo_mismatch %04x not %04x\n", + default_instance->host_no, dregs->fifo_count, + (unsigned int) count); + NCR5380_print(default_instance); + } + + /* setup udc */ +#ifdef OLDDMA + udc_regs->addr_hi = ((dvma_vtob(dmabuf) & 0xff0000) >> 8); + udc_regs->addr_lo = (dvma_vtob(dmabuf) & 0xffff); +#else + udc_regs->addr_hi = (((unsigned long)(addr) & 0xff0000) >> 8); + udc_regs->addr_lo = ((unsigned long)(addr) & 0xffff); +#endif + udc_regs->count = count/2; /* count in words */ + udc_regs->mode_hi = UDC_MODE_HIWORD; + if(write_flag) { + if(count & 1) + udc_regs->count++; + udc_regs->mode_lo = UDC_MODE_LSEND; + udc_regs->rsel = UDC_RSEL_SEND; + } else { + udc_regs->mode_lo = UDC_MODE_LRECV; + udc_regs->rsel = UDC_RSEL_RECV; + } + + /* announce location of regs block */ + sun3_udc_write(((dvma_vtob(udc_regs) & 0xff0000) >> 8), + UDC_CHN_HI); + + sun3_udc_write((dvma_vtob(udc_regs) & 0xffff), UDC_CHN_LO); + + /* set dma master on */ + sun3_udc_write(0xd, UDC_MODE); + + /* interrupt enable */ + sun3_udc_write(UDC_INT_ENABLE, UDC_CSR); + + return count; + +} + +static inline unsigned long sun3scsi_dma_count(struct Scsi_Host *instance) +{ + unsigned short resid; + + dregs->udc_addr = 0x32; + udelay(SUN3_DMA_DELAY); + resid = dregs->udc_data; + udelay(SUN3_DMA_DELAY); + resid *= 2; + + return (unsigned long) resid; +} + +static inline unsigned long sun3scsi_dma_residual(struct Scsi_Host *instance) +{ + return last_residual; +} + +static inline unsigned long sun3scsi_dma_xfer_len(unsigned long wanted, Scsi_Cmnd *cmd, + int write_flag) +{ + if(cmd->request->flags & REQ_CMD) + return wanted; + else + return 0; +} + +static inline int sun3scsi_dma_start(unsigned long count, unsigned char *data) +{ + + sun3_udc_write(UDC_CHN_START, UDC_CSR); + + return 0; +} + +/* clean up after our dma is done */ +static int sun3scsi_dma_finish(int write_flag) +{ + unsigned short count; + unsigned short fifo; + int ret = 0; + + sun3_dma_active = 0; +#if 1 + // check to empty the fifo on a read + if(!write_flag) { + int tmo = 20000; /* .2 sec */ + + while(1) { + if(dregs->csr & CSR_FIFO_EMPTY) + break; + + if(--tmo <= 0) { + printk("sun3scsi: fifo failed to empty!\n"); + return 1; + } + udelay(10); + } + } + +#endif + + count = sun3scsi_dma_count(default_instance); +#ifdef OLDDMA + + /* if we've finished a read, copy out the data we read */ + if(sun3_dma_orig_addr) { + /* check for residual bytes after dma end */ + if(count && (NCR5380_read(BUS_AND_STATUS_REG) & + (BASR_PHASE_MATCH | BASR_ACK))) { + printk("scsi%d: sun3_scsi_finish: read overrun baby... ", default_instance->host_no); + printk("basr now %02x\n", NCR5380_read(BUS_AND_STATUS_REG)); + ret = count; + } + + /* copy in what we dma'd no matter what */ + memcpy(sun3_dma_orig_addr, dmabuf, sun3_dma_orig_count); + sun3_dma_orig_addr = NULL; + + } +#else + + fifo = dregs->fifo_count; + last_residual = fifo; + + /* empty bytes from the fifo which didn't make it */ + if((!write_flag) && (count - fifo) == 2) { + unsigned short data; + unsigned char *vaddr; + + data = dregs->fifo_data; + vaddr = (unsigned char *)dvma_btov(sun3_dma_orig_addr); + + vaddr += (sun3_dma_orig_count - fifo); + + vaddr[-2] = (data & 0xff00) >> 8; + vaddr[-1] = (data & 0xff); + } + + dvma_unmap(sun3_dma_orig_addr); + sun3_dma_orig_addr = NULL; +#endif + sun3_udc_write(UDC_RESET, UDC_CSR); + dregs->fifo_count = 0; + dregs->csr &= ~CSR_SEND; + + /* reset fifo */ + dregs->csr &= ~CSR_FIFO; + dregs->csr |= CSR_FIFO; + + sun3_dma_setup_done = NULL; + + return ret; + +} + +#include "sun3_NCR5380.c" + +static Scsi_Host_Template driver_template = { + .name = SUN3_SCSI_NAME, + .detect = sun3scsi_detect, + .release = sun3scsi_release, + .info = sun3scsi_info, + .queuecommand = sun3scsi_queue_command, + .eh_abort_handler = sun3scsi_abort, + .eh_bus_reset_handler = sun3scsi_bus_reset, + .can_queue = CAN_QUEUE, + .this_id = 7, + .sg_tablesize = SG_TABLESIZE, + .cmd_per_lun = CMD_PER_LUN, + .use_clustering = DISABLE_CLUSTERING +}; + + +#include "scsi_module.c" + +MODULE_LICENSE("GPL"); -- cgit v1.2.3